# ==========================================================================
#############################################################################
# ==========================================================================
#
#  This is a resource file for the Mars executable. You can here setup
#   setup the tasks of the eventloops executed in the Mars executable -
#   if supported by these tasks.
#
# ==========================================================================
#############################################################################
# ==========================================================================

# -------------------------------------------------------------------------
# Use this if you want to setup the logging stream for the jobs
# (overwrites command line options)
# -------------------------------------------------------------------------
#MLog.VerbosityLevel: 2
#MLog.DebugLevel:     1
#MLog.NoColors:       yes

# -------------------------------------------------------------------------
# Define here which signal extractor you are going to use for the
# whole calibration chain
# -------------------------------------------------------------------------
#ExtractSignal: MExtractTimeAndChargeDigitalFilter
#ExtractSignal.WeightsFile: msignal/MC_weights46.dat
# -------------------------------------------------------------------------
# Define here parameters valid for all extractors above
# -------------------------------------------------------------------------
#ExtractSignal.LoGainSwitch:      120
#ExtractSignal.LoGainStartShift: -2.5
# -------------------------------------------------------------------------
# Define here parameters valid for the spline:
# -------------------------------------------------------------------------
#ExtractSignal.HiGainFirst:         0
#ExtractSignal.HiGainLast:         14
#ExtractSignal.LoGainFirst:         1
#ExtractSignal.LoGainLast:         14
#ExtractSignal.Resolution:       0.05
#ExtractSignal.RiseTimeHiGain:   0.64
#ExtractSignal.FallTimeHiGain:   0.76
#ExtractSignal.LoGainStretch:     1.5
#ExtractSignal.OffsetLoGain:      1.3
#ExtractSignal.ExtractionType: Integral <default>
#ExtractSignal.ExtractionType: Amplitude
# -------------------------------------------------------------------------
# Define here parameters valid for the Digital Filter:
# -------------------------------------------------------------------------
#ExtractSignal.HiGainFirst:         0
#ExtractSignal.HiGainLast:         16
#ExtractSignal.LoGainFirst:         1
#ExtractSignal.LoGainLast:         14
#ExtractSignal.OffsetLoGain:     0.95

# =========================================================================
# To look into MUX data use the following setup
# =========================================================================
#ExtractSignal: MExtractTimeAndChargeSpline
#ExtractSignal.RiseTimeHiGain:   4.3
#ExtractSignal.FallTimeHiGain:   5.1
#ExtractSignal.HiGainFirst:      15
#ExtractSignal.HiGainLast:       65

# -------------------------------------------------------------------------
# In the case of the Digital filter you have to overwrite the default
# weights file depending on what you are extracting
# -------------------------------------------------------------------------
#ExtractSignal.WeightsFile: msignal/cosmics_weights.dat

# -------------------------------------------------------------------------
# Setup level for determining of bad pixels
# -------------------------------------------------------------------------
#MBadPixelsCalc.PedestalLevel:         3.0
#MBadPixelsCalc.PedestalLevelVariance: 3.0
#MBadPixelsTreat.NumMinNeighbors:      3
#MBadPixelsTreat.UseInterpolation:     yes
#MBadPixelsTreat.ProcessPedestalEvt:   yes
#MBadPixelsTreat.ProcessPedestalRun:   no
#MBadPixelsTreat.ProcessTimes:         yes
#MBadPixelsTreat.UseCentralPixel:      no
#MBadPixelsTreat.HardTreatment:        no

# -------------------------------------------------------------------------
# This is how you can setup the Image cleaning used in the Camera Display
#  e.g. Standard, Absolute, Scaled, Time
# -------------------------------------------------------------------------
MImgCleanStd.CleanMethod:   absolute
#MImgCleanStd.CleanLevel0:   6.0
MImgCleanStd.CleanLevel1:   6.0
MImgCleanStd.CleanLevel2:   3.0
MImgCleanStd.TimeLevel1:    1.75
MImgCleanStd.TimeLevel2:    1.75
MImgCleanStd.PostCleanType: 3

#MImgCleanStd.CleanRings: 1
#MImgCleanStd.KeepSinglePixels: No

# -------------------------------------------------------------------------
# Setup a cut to choose the events which should be displayed
#    (Use this cuts to display only good Muon candidates)
# -------------------------------------------------------------------------
#Cut.Inverted: Yes
#Cut.Condition: {0} && {1} && {2}
#Cut.0: MHillas.fSize>150
#Cut.1: (MMuonSearchPar.fRadius>180) && (MMuonSearchPar.fRadius<400) && (MMuonSearchPar.fDeviation<45)
#Cut.2: (MMuonCalibPar.fArcPhi>190)  && (MMuonSearchPar.fDeviation<35) && (MMuonCalibPar.fArcWidth<0.20) && (MMuonCalibPar.fArcWidth>0.04)