source: trunk/MagicSoft/Mars/mbase/MTime.cc@ 3895

/* ======================================================================== *\
!
! *
! * This file is part of MARS, the MAGIC Analysis and Reconstruction
! * Software. It is distributed to you in the hope that it can be a useful
! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
! * It is distributed WITHOUT ANY WARRANTY.
! *
! * Permission to use, copy, modify and distribute this software and its
! * documentation for any purpose is hereby granted without fee,
! * provided that the above copyright notice appear in all copies and
! * that both that copyright notice and this permission notice appear
! * in supporting documentation. It is provided "as is" without express
! * or implied warranty.
! *
!
!
!   Author(s): Thomas Bretz  12/2000 <mailto:tbretz@astro.uni-wuerzburg.de>
!
!   Copyright: MAGIC Software Development, 2000-2003
!
!
\* ======================================================================== */

/////////////////////////////////////////////////////////////////////////////
//
// MTime
//
// A generalized MARS time stamp.
//
//
// We do not use floating point values here, because of several reasons:
//  - having the times stored in integers only is more accurate and
//    more reliable in comparison conditions
//  - storing only integers gives similar bit-pattern for similar times
//    which makes compression (eg gzip algorithm in TFile) more
//    successfull
//
// Note, that there are many conversion function converting the day time
// into a readable string. Also a direct interface to SQL time strings
// is available.
//
// If you are using MTime containers as axis lables in root histograms
// use GetAxisTime(). Make sure that you use the correct TimeFormat
// on your TAxis (see GetAxisTime())
//
//
// WARNING: Be carefull changing this class. It is also used in the
//          MAGIC drive software cosy!
//
// Remarke: If you encounter strange behaviour, check the casting.
//          Note, that on Linux machines ULong_t and UInt_t is the same.
//
//
// Version 1:
// ----------
//  - first version
//
// Version 2:
// ----------
//  - removed fTimeStamp[2]
//
// Version 3:
// ----------
//  - removed fDurtaion - we may put it back when it is needed
//  - complete rewrite of the data members (old ones completely replaced)
//
/////////////////////////////////////////////////////////////////////////////
#include "MTime.h"

#include <iomanip>

#include <time.h>     // struct tm
#include <sys/time.h> // struct timeval

#include <TTime.h>

#include "MLog.h"
#include "MAstro.h"

ClassImp(MTime);

using namespace std;

const UInt_t MTime::kHour = 3600000;         // [ms] one hour
const UInt_t MTime::kDay  = MTime::kHour*24; // [ms] one day

// --------------------------------------------------------------------------
//
// Constructor. Calls SetMjd(d) for d>0 in all other cases the time
// is set to the current UTC time.
//
MTime::MTime(Double_t d)
{
    Init(0, 0);
    if (d<=0)
        Now();
    else
        SetMjd(d);
}

// --------------------------------------------------------------------------
//
// Return date as year(y), month(m), day(d)
//
void MTime::GetDate(UShort_t &y, Byte_t &m, Byte_t &d) const
{
    MAstro::Mjd2Ymd((Long_t)fTime<0?fMjd-1:fMjd, y, m, d);
}

// --------------------------------------------------------------------------
//
// Return the time in the range [0h, 24h) = [0h0m0.000s - 23h59m59.999s]
//
void MTime::GetTime(Byte_t &h, Byte_t &m, Byte_t &s, UShort_t &ms) const
{
    Long_t tm = GetTime24();
    ms  = tm%1000;            // [ms]
    tm /= 1000;               // [s]
    s   = tm%60;              // [s]
    tm /= 60;                 // [m]
    m   = tm%60;              // [m]
    tm /= 60;                 // [h]
    h   = tm;                 // [h]
}

// --------------------------------------------------------------------------
//
//  Return time as MJD (=JD-24000000.5)
//
Double_t MTime::GetMjd() const
{
    return fMjd+(Double_t)(fNanoSec/1e6+(Long_t)fTime)/kDay;
}

// --------------------------------------------------------------------------
//
// Return a time which is expressed in milliseconds since 01/01/1995 0:00h
// This is compatible with root's definition used in gSystem->Now()
// and TTime.
// Note, gSystem->Now() returns local time, such that it may differ
// from GetRootTime() (if you previously called MTime::Now())
//
TTime MTime::GetRootTime() const
{
    return (ULong_t)((GetMjd()-49718)*kDay);
}

// --------------------------------------------------------------------------
//
// Return a time which is expressed in seconds since 01/01/1995 0:00h
// This is compatible with root's definition used in TAxis.
// Note, a TAxis always displayes (automatically) given times in
// local time (while here we return UTC) such, that you may encounter
// strange offsets. You can get rid of this by calling:
//    TAxis::SetTimeFormat("[your-format] %F1995-01-01 00:00:00");
//
Double_t MTime::GetAxisTime() const
{
    return (GetMjd()-49718)*kDay/1000;
}

// --------------------------------------------------------------------------
//
// Set a time expressed in MJD, Time of Day (eg. 23:12.779h expressed
// in milliseconds) and a nanosecond part.
//
Bool_t MTime::Set(UInt_t mjd, ULong_t ms, UInt_t ns)
{
    // [d]  mjd  (eg. 52320)
    // [ms] time (eg. 17h expressed in ms)
    // [ns] time (ns part of time)

    if (ms>kDay-1 || ns>999999)
        return kFALSE;

    const Bool_t am = ms<kHour*13; // day of sunrise?

    fMjd     = am ? mjd : mjd + 1;
    fTime    = (Long_t)(am ? ms  : ms-kDay);
    fNanoSec = ns;

    return kTRUE;
}

// --------------------------------------------------------------------------
//
// Set MTime to given MJD (eg. 52080.0915449892)
//
void MTime::SetMjd(Double_t m)
{
    const UInt_t   mjd  = (UInt_t)TMath::Floor(m);
    const Double_t frac = fmod(m, 1)*kDay; // [ms] Fraction of day
    const UInt_t   ns   = (UInt_t)fmod(frac*1e6, 1000000);

    Set(mjd, (ULong_t)TMath::Floor(frac), ns);
}

// --------------------------------------------------------------------------
//
// Set MTime to given time and date
//
Bool_t MTime::Set(UShort_t y, Byte_t m, Byte_t d, Byte_t h, Byte_t min, Byte_t s, UShort_t ms, UInt_t ns)
{
    if (h>23 || min>59 || s>59 || ms>999 || ns>999999)
        return kFALSE;

    const Int_t mjd = MAstro::Ymd2Mjd(y, m, d);
    if (mjd<0)
        return kFALSE;

    const ULong_t tm = ((((h*60+min)*60)+s)*1000)+ms;

    return Set(mjd, tm, ns);
}

// --------------------------------------------------------------------------
//
// Set MTime to time expressed in a 'struct timeval'
//
void MTime::Set(const struct timeval &tv)
{
    const UInt_t mjd = 1000*tv.tv_sec/kDay + 40587;
    const Long_t tm  = tv.tv_sec%(24*3600)*1000 + tv.tv_usec/1000;
    const UInt_t ms  = tv.tv_usec%1000;

    Set(mjd, tm, ms*1000);
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "dd.mm.yyyy hh:mm:ss.fff"
//
Bool_t MTime::SetString(const char *str)
{
    if (!str)
        return kFALSE;

    UInt_t y, mon, d, h, m, s, ms;
    const Int_t n = sscanf(str, "%02u.%02u.%04u %02u:%02u:%02u.%03u",
                           &d, &mon, &y, &h, &m, &s, &ms);

    return n==7 ? Set(y, mon, d, h, m, s, ms) : kFALSE;
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "yyyy-mm-dd hh:mm:ss"
//
Bool_t MTime::SetSqlDateTime(const char *str)
{
    if (!str)
        return kFALSE;

    UInt_t y, mon, d, h, m, s;
    const Int_t n = sscanf(str, "%04u-%02u-%02u %02u:%02u:%02u",
                           &y, &mon, &d, &h, &m, &s);

    return n==6 ? Set(y, mon, d, h, m, s) : kFALSE;
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "yyyymmddhhmmss"
//
Bool_t MTime::SetSqlTimeStamp(const char *str)
{
    if (!str)
        return kFALSE;

    UInt_t y, mon, d, h, m, s;
    const Int_t n = sscanf(str, "%04u%02u%02u%02u%02u%02u",
                           &y, &mon, &d, &h, &m, &s);

    return n==6 ? Set(y, mon, d, h, m, s) : kFALSE;
}

// --------------------------------------------------------------------------
//
// Set MTime to time expressed as in CT1 PreProc files
//
void MTime::SetCT1Time(UInt_t mjd, UInt_t t1, UInt_t t0)
{
    // int   isecs_since_midday; // seconds passed since midday before sunset (JD of run start)
    // int   isecfrac_200ns;     // fractional part of isecs_since_midday
    // fTime->SetTime(isecfrac_200ns, isecs_since_midday);
    fNanoSec         = (200*t1)%1000000;
    const ULong_t ms = (200*t1)/1000000 + t0+12*kHour;

    fTime = (Long_t)(ms<13*kHour ? ms : ms-kDay);

    fMjd = mjd+1;
}

// --------------------------------------------------------------------------
//
// Update the magic time. Make sure, that the MJD is set correctly.
// It must be the MJD of the corresponding night. You can set it
// by Set(2003, 12, 24);
//
// It is highly important, that the time correspoding to the night is
// between 13:00:00.0 (day of dawning) and 12:59:59.999 (day of sunrise)
//
Bool_t MTime::UpdMagicTime(Byte_t h, Byte_t m, Byte_t s, UInt_t ns)
{
    if (h>23 || m>59 || s>59 || ns>999999999)
         return kFALSE;

    const ULong_t tm = ((((h*60+m)*60)+s)*1000)+ns/1000000;

    fTime = (Long_t)(tm<kHour*13 ? tm  : tm-kDay); // day of sunrise?
    fNanoSec = ns%1000000;

    return kTRUE;

}

// --------------------------------------------------------------------------
//
//  Conversion from Universal Time to Greenwich mean sidereal time,
//  with rounding errors minimized.
//
//  The result is the Greenwich Mean Sidereal Time (radians)
//
//  There is no restriction on how the UT is apportioned between the
//  date and ut1 arguments.  Either of the two arguments could, for
//  example, be zero and the entire date+time supplied in the other.
//  However, the routine is designed to deliver maximum accuracy when
//  the date argument is a whole number and the ut argument lies in
//  the range 0 to 1, or vice versa.
//
//  The algorithm is based on the IAU 1982 expression (see page S15 of
//  the 1984 Astronomical Almanac).  This is always described as giving
//  the GMST at 0 hours UT1.  In fact, it gives the difference between
//  the GMST and the UT, the steady 4-minutes-per-day drawing-ahead of
//  ST with respect to UT.  When whole days are ignored, the expression
//  happens to equal the GMST at 0 hours UT1 each day.
//
//  In this routine, the entire UT1 (the sum of the two arguments date
//  and ut) is used directly as the argument for the standard formula.
//  The UT1 is then added, but omitting whole days to conserve accuracy.
//
//  The extra numerical precision delivered by the present routine is
//  unlikely to be important in an absolute sense, but may be useful
//  when critically comparing algorithms and in applications where two
//  sidereal times close together are differenced.
//
Double_t MTime::GetGmst() const
{
    const Double_t ut = (Double_t)(fNanoSec/1e6+(Long_t)fTime)/kDay;

    // Julian centuries since J2000.
    const Double_t t = (ut -(51544.5-fMjd)) / 36525.0;

    // GMST at this UT1
    const Double_t r1 = 24110.54841+(8640184.812866+(0.093104-6.2e-6*t)*t)*t;
    const Double_t r2 = 86400.0*ut;

    const Double_t sum = (r1+r2)/(24*3600);

    return fmod(sum, 1)*TMath::TwoPi();//+TMath::TwoPi();
}

// --------------------------------------------------------------------------
//
// Set the time to the current system time. The timezone is ignored.
// If everything is set correctly you'll get UTC.
//
void MTime::Now()
{
#ifdef __LINUX__
    struct timeval tv;
    if (gettimeofday(&tv, NULL)<0)
        Clear();
    else
        Set(tv);
#else
    Clear();
#endif
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "dd.mm.yyyy hh:mm:ss.fff"
//
TString MTime::GetString() const
{
    UShort_t y, ms;
    Byte_t mon, d, h, m, s;

    GetDate(y, mon, d);
    GetTime(h, m, s, ms);

    return TString(Form("%02d.%02d.%04d %02d:%02d:%02d.%03d", d, mon, y, h, m, s, ms));
}

// --------------------------------------------------------------------------
//
// Return contents as a string format'd with strftime:
// Here is a short summary of the most important formats. For more
// information see the man page (or any other description) of
// strftime...
//
//  %a  The abbreviated weekday name according to the current locale.
//  %A  The full weekday name according to the current locale.
//  %b  The abbreviated month name according to the current locale.
//  %B  The full month name according to the current locale.
//  %c  The preferred date and time representation for the current locale.
//  %d  The day of the month as a decimal number (range  01 to 31).
//  %e  Like %d, the day of the month as a decimal number,
//      but a leading zero is replaced by a space.
//  %H  The hour as a decimal number using a 24-hour clock (range 00 to 23)
//  %k  The hour (24-hour clock) as a decimal number (range 0 to 23);
//      single digits are preceded by a blank.
//  %m  The month as a decimal number (range 01 to 12).
//  %M  The minute as a decimal number (range 00 to 59).
//  %R  The time in 24-hour notation (%H:%M).  For a
//      version including the seconds, see %T below.
//  %S  The second as a decimal number (range 00 to 61).
//  %T  The time in 24-hour notation (%H:%M:%S).
//  %x  The preferred date representation for the current
//      locale without the time.
//  %X  The preferred time representation for the current
//      locale without the date.
//  %y  The year as a decimal number without a century (range 00 to 99).
//  %Y  The year as a decimal number including the century.
//  %+  The date and time in date(1) format.
//
// The default is: Tuesday 16.February 2004 12:17:22
//
// The maximum size of the return string is 128 (incl. NULL)
//
TString MTime::GetStringFmt(const char *fmt) const
{
    if (!fmt)
        fmt = "%A %e.%B %Y %H:%M:%S";

    UShort_t y, ms;
    Byte_t mon, d, h, m, s;

    GetDate(y, mon, d);
    GetTime(h, m, s, ms);

    struct tm time;
    time.tm_sec   = s;
    time.tm_min   = m;
    time.tm_hour  = h;
    time.tm_mday  = d;
    time.tm_mon   = mon-1;
    time.tm_year  = y-1900;
    time.tm_isdst = 0;

    // recalculate tm_yday and tm_wday
    mktime(&time);

    char ret[128];
    return TString(strftime(ret, 127, fmt, &time) ? ret : "");
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "yyyy-mm-dd hh:mm:ss"
//
TString MTime::GetSqlDateTime() const
{
    return GetStringFmt("%Y-%m-%d %H:%M:%S");
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "yyyymmddhhmmss"
//
TString MTime::GetSqlTimeStamp() const
{
    return GetStringFmt("%Y%m%d%H%M%S");
}

// --------------------------------------------------------------------------
//
// Return contents as a TString of the form:
//   "yyyymmdd_hhmmss"
//
TString MTime::GetFileName() const
{
    return GetStringFmt("%Y%m%d_%H%M%S");
}

// --------------------------------------------------------------------------
//
// Print MTime as string
//
void MTime::Print(Option_t *) const
{
    UShort_t yea, ms;
    Byte_t mon, day, h, m, s;

    GetDate(yea, mon, day);
    GetTime(h, m, s, ms);

    *fLog << GetDescriptor() << ": ";
    *fLog << GetString() << Form(" (+%dns)", fNanoSec) << endl;
} 

istream &MTime::ReadBinary(istream &fin)
{
    UShort_t y;
    Byte_t mon, d, h, m, s;

    fin.read((char*)&y,   2);
    fin.read((char*)&mon, 1);
    fin.read((char*)&d,   1);
    fin.read((char*)&h,   1);
    fin.read((char*)&m,   1);
    fin.read((char*)&s,   1); // Total=7

    Set(y, mon, d, h, m, s, 0);

    return fin;
}