source: trunk/MagicSoft/Mars/mcalib/MCalibrate.cc@ 3204

Last change on this file since 3204 was 3183, checked in by tbretz, 21 years ago
*** empty log message ***
File size: 7.9 KB
Line 
1/* ======================================================================== *\
2!
3! *
4! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5! * Software. It is distributed to you in the hope that it can be a useful
6! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7! * It is distributed WITHOUT ANY WARRANTY.
8! *
9! * Permission to use, copy, modify and distribute this software and its
10! * documentation for any purpose is hereby granted without fee,
11! * provided that the above copyright notice appear in all copies and
12! * that both that copyright notice and this permission notice appear
13! * in supporting documentation. It is provided "as is" without express
14! * or implied warranty.
15! *
16!
17!
18! Author(s): Javier Lopez 12/2003 <mailto:jlopez@ifae.es>
19! Author(s): Javier Rico 01/2004 <mailto:jrico@ifae.es>
20!
21! Copyright: MAGIC Software Development, 2000-2004
22!
23!
24\* ======================================================================== */
25
26//////////////////////////////////////////////////////////////////////////////
27//
28// MCalibrate
29//
30// This task takes the integrated charge from MExtractedSignal and apply
31// the calibration constants from MCalibraitionCam to the charge. Then
32// stores number of photons obtained in MCerPhotEvt. Selection of different
33// calibration methods is allowed through SetCalibrationMode member function
34//
35// Input Containers:
36// MExtractedSingal
37// MCalibrationCam
38//
39// Output Containers:
40// MCerPhotEvt
41//
42//////////////////////////////////////////////////////////////////////////////
43#include "MCalibrate.h"
44#include "MCalibrationConfig.h"
45
46#include "MLog.h"
47#include "MLogManip.h"
48
49#include "MParList.h"
50#include "MH.h"
51
52#include "MGeomCam.h"
53
54#include "MCalibrationCam.h"
55#include "MCalibrationPix.h"
56
57#include "MExtractedSignalCam.h"
58#include "MExtractedSignalPix.h"
59
60#include "MCerPhotEvt.h"
61
62ClassImp(MCalibrate);
63
64using namespace std;
65// --------------------------------------------------------------------------
66//
67// Default constructor.
68//
69MCalibrate::MCalibrate(CalibrationMode_t calmode,const char *name, const char *title) : fCalibrationMode(calmode)
70{
71 fName = name ? name : "MCalibrate";
72 fTitle = title ? title : "Task to calculate the number of photons in one event";
73}
74
75// --------------------------------------------------------------------------
76//
77// The PreProcess searches for the following input containers:
78// - MGeomCam
79// - MCalibrationCam
80// - MExtractedSignalCam
81//
82// The following output containers are also searched and created if
83// they were not found:
84//
85// - MCerPhotEvt
86//
87Int_t MCalibrate::PreProcess(MParList *pList)
88{
89
90 fSignals = (MExtractedSignalCam*)pList->FindObject(AddSerialNumber("MExtractedSignalCam"));
91
92 if (!fSignals)
93 {
94 *fLog << err << AddSerialNumber("MExtractedSignalCam") << " not found ... aborting" << endl;
95 return kFALSE;
96 }
97
98 if(fCalibrationMode>kNone)
99 {
100
101 fCalibrations = (MCalibrationCam*)pList->FindObject(AddSerialNumber("MCalibrationCam"));
102 if (!fCalibrations)
103 {
104 *fLog << err << AddSerialNumber("MCalibrationCam") << " not found ... aborting." << endl;
105 return kFALSE;
106 }
107
108 }
109
110 fCerPhotEvt = (MCerPhotEvt*)pList->FindCreateObj(AddSerialNumber("MCerPhotEvt"));
111 if (!fCerPhotEvt)
112 return kFALSE;
113
114 return kTRUE;
115}
116
117// --------------------------------------------------------------------------
118//
119// Check for validity of the selected calibration method, switch to a
120// different one in case of need
121//
122Bool_t MCalibrate::ReInit(MParList *pList)
123{
124
125 if(fCalibrationMode == kBlindPixel && !fCalibrations->IsBlindPixelMethodValid())
126 {
127 *fLog << warn << GetDescriptor() << "Warning: Blind pixel calibration method not valid, switching to F-factor method" << endl;
128 fCalibrationMode = kFfactor;
129 }
130
131 if(fCalibrationMode == kPinDiode && !fCalibrations->IsPINDiodeMethodValid())
132 {
133 *fLog << warn << GetDescriptor() << "Warning: PIN diode calibration method not valid, switching to F-factor method" << endl;
134 fCalibrationMode = kFfactor;
135 }
136
137 switch(fCalibrationMode)
138 {
139 case kBlindPixel:
140 break;
141 case kFfactor:
142 break;
143 case kPinDiode:
144 *fLog << err << GetDescriptor()
145 << ": PIN Diode Calibration mode not yet available " << endl;
146 return kFALSE;
147 break;
148 case kCombined:
149 *fLog << err << GetDescriptor()
150 << ": Combined Calibration mode not yet available " << endl;
151 return kFALSE;
152 break;
153 case kDummy:
154 *fLog << warn << GetDescriptor()
155 << ": WARNING: Dummy calibration, no calibration applied!!" << endl;
156 break;
157 default:
158 *fLog << warn << GetDescriptor()
159 << ": WARNING: Calibration mode value ("
160 <<fCalibrationMode<<") not known" << endl;
161 return kFALSE;
162 }
163
164 return kTRUE;
165}
166// --------------------------------------------------------------------------
167//
168// Apply the calibration factors to the extracted signal according to the
169// selected calibration method
170//
171Int_t MCalibrate::Process()
172{
173 /*
174 if (fCalibrations->GetNumPixels() != (UInt_t)fSignals->GetSize())
175 {
176 // FIXME: MExtractedSignal must be of variable size -
177 // like MCerPhotEvt - because we must be able
178 // to reduce size by zero supression
179 // For the moment this check could be done in ReInit...
180 *fLog << err << "MExtractedSignal and MCalibrationCam have different sizes... abort." << endl;
181 return kFALSE;
182 }
183 */
184
185 UInt_t npix = fSignals->GetSize();
186
187 Float_t hiloconv = 1.;
188 Float_t hiloconverr= 0.;
189 Float_t calibrationConversionFactor = 1.;
190 Float_t calibrationConversionFactorError = 0.;
191
192 for (UInt_t pixidx=0; pixidx<npix; pixidx++)
193 {
194 if(fCalibrationMode!=kNone)
195 {
196 MCalibrationPix &pix = (*fCalibrations)[pixidx];
197
198 if (!pix.IsChargeValid())
199 continue;
200
201 hiloconv = pix.GetConversionHiLo();
202 hiloconverr= pix.GetConversionHiLoError();
203
204 switch(fCalibrationMode)
205 {
206 case kBlindPixel:
207 calibrationConversionFactor = pix.GetMeanConversionBlindPixelMethod();
208 calibrationConversionFactorError = pix.GetErrorConversionBlindPixelMethod();
209 break;
210 case kPinDiode:
211 calibrationConversionFactor = pix.GetMeanConversionPINDiodeMethod();
212 calibrationConversionFactorError = pix.GetErrorConversionPINDiodeMethod();
213 break;
214 case kFfactor:
215 calibrationConversionFactor = pix.GetMeanConversionFFactorMethod();
216 calibrationConversionFactorError = pix.GetErrorConversionFFactorMethod();
217 break;
218 case kCombined:
219 calibrationConversionFactor = pix.GetMeanConversionCombinedMethod();
220 calibrationConversionFactorError = pix.GetErrorConversionCombinedMethod();
221 break;
222 case kDummy:
223 calibrationConversionFactor = 1.;
224 calibrationConversionFactorError = 0.;
225 break;
226 }
227 }
228
229 MExtractedSignalPix &sig = (*fSignals)[pixidx];
230
231 Float_t signal;
232 Float_t signalErr = 0.;
233 Float_t nphot,nphotErr;
234
235 if (sig.IsLoGainUsed())
236 {
237 signal = sig.GetExtractedSignalLoGain()*hiloconv;
238 signalErr = signal*hiloconverr;
239 }
240 else
241 {
242 if (sig.GetExtractedSignalHiGain() > 9999.)
243 {
244 signal = 0.;
245 signalErr = 0.;
246 }
247 else
248 signal = sig.GetExtractedSignalHiGain();
249 }
250
251 nphot = signal*calibrationConversionFactor;
252 nphotErr = signal*calibrationConversionFactorError
253 *signal*calibrationConversionFactorError
254 +signalErr*calibrationConversionFactor
255 *signalErr*calibrationConversionFactor;
256
257 nphotErr = TMath::Sqrt(nphotErr);
258
259 MCerPhotPix *cpix = fCerPhotEvt->AddPixel(pixidx, nphot, nphotErr);
260
261 if (sig.GetNumLoGainSaturated() > 0)
262 cpix->SetPixelSaturated();
263 }
264
265 fCerPhotEvt->FixSize();
266 fCerPhotEvt->SetReadyToSave();
267
268 return kTRUE;
269}
Note: See TracBrowser for help on using the repository browser.