source: trunk/MagicSoft/Mars/mcalib/MCalibrateData.cc@ 4693

Last change on this file since 4693 was 4639, checked in by tbretz, 20 years ago
*** empty log message ***
File size: 21.7 KB
Line 
1/* ======================================================================== *\
2!
3! *
4! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5! * Software. It is distributed to you in the hope that it can be a useful
6! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7! * It is distributed WITHOUT ANY WARRANTY.
8! *
9! * Permission to use, copy, modify and distribute this software and its
10! * documentation for any purpose is hereby granted without fee,
11! * provided that the above copyright notice appear in all copies and
12! * that both that copyright notice and this permission notice appear
13! * in supporting documentation. It is provided "as is" without express
14! * or implied warranty.
15! *
16!
17!
18! Author(s): Javier Lopez 12/2003 <mailto:jlopez@ifae.es>
19! Author(s): Javier Rico 01/2004 <mailto:jrico@ifae.es>
20! Author(s): Wolfgang Wittek 02/2004 <mailto:wittek@mppmu.mpg.de>
21! Author(s): Markus Gaug 04/2004 <mailto:markus@ifae.es>
22! Author(s): Hendrik Bartko 08/2004 <mailto:hbartko@mppmu.mpg.de>
23! Author(s): Thomas Bretz 08/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
24!
25! Copyright: MAGIC Software Development, 2000-2004
26!
27!
28\* ======================================================================== */
29
30///////////////////////////////////////////////////////////////////////////////////
31//
32// MCalibrateData
33//
34// This task takes the integrated charge from MExtractedSignal and applies
35// the calibration constants from MCalibrationCam to convert the summed FADC
36// slices into photons. The number of photons obtained is stored in MCerPhotEvt.
37// Optionally, the calibration of pedestals from an MPedestalCam container into
38// an MPedPhotCam container can be chosen with the member functions
39// SetPedestalType(). Default is 'kRun', i.e. calibration of pedestals from a
40// dedicated pedestal run.
41// In case, the chosen pedestal type is kRun or kEvent, in ReInit() the MPedPhotCam
42// container is filled using the information from MPedestalCam, MExtractedSignalCam,
43// MCalibrationChargeCam and MCalibrationQECam
44//
45// Selection of different calibration methods is allowed through the
46// SetCalibrationMode() member function (default: kFfactor)
47//
48// The calibration modes which exclude non-valid pixels are the following:
49//
50// kFfactor: calibrates using the F-Factor method
51// kBlindpixel: calibrates using the BlindPixel method
52// kBlindpixel: calibrates using the BlindPixel method
53// kFlatCharge: perform a charge flat-flatfielding. Outer pixels are area-corrected.
54// kDummy: calibrates with fixed conversion factors of 1 and errors of 0.
55//
56// The calibration modes which include all pixels regardless of their validity is:
57//
58// kNone: calibrates with fixed conversion factors of 1 and errors of 0.
59//
60// Use the kDummy and kNone methods ONLY FOR DEBUGGING!
61//
62//
63// This class can calibrate data and/or pedestals. To switch off calibration of data
64// set the Calibration Mode to kSkip. To switch on pedestal calibration call either
65// SetPedestalFlag(MCalibrateData::kRun) (calibration is done once in ReInit)
66// SetPedestalFlag(MCalibrateData::kEvent) (calibration is done for each event)
67//
68// By calling SetNamePedADCContainer() and/or SetNamePedPhotContainer() you
69// can control the name of the MPedestalCam and/or MPedPhotCam container which is used.
70//
71// Assume you want to calibrate "MPedestalCam" once and "MPedestalFromLoGain" [MPedestalCam]
72// event-by-event, so:
73// MCalibrateData cal1;
74// cal1.SetCalibrationMode(MCalibrateData::kSkip);
75// cal1.SetPedestalFlag(MCalibrateData::kRun);
76// MCalibrateData cal2;
77// cal2.SetCalibrationMode(MCalibrateData::kSkip);
78// cal2.SetNamePedADCContainer("MPedestalFromLoGain");
79// cal2.SetNamePedPhotContainer("MPedPhotFromLoGain")
80// cal2.SetPedestalFlag(MCalibrateData::kEvent);
81//
82//
83// Input Containers:
84// [MPedestalCam]
85// [MExtractedSignalCam]
86// [MCalibrationChargeCam]
87// [MCalibrationQECam]
88// MBadPixelsCam
89//
90// Output Containers:
91// [MPedPhotCam]
92// [MCerPhotEvt]
93//
94// See also: MJCalibration, MJPedestal, MJExtractSignal, MJExtractCalibTest
95//
96//////////////////////////////////////////////////////////////////////////////
97#include "MCalibrateData.h"
98
99#include <fstream>
100
101#include <TEnv.h>
102
103#include "MLog.h"
104#include "MLogManip.h"
105
106#include "MParList.h"
107#include "MH.h"
108
109#include "MGeomCam.h"
110
111#include "MPedestalCam.h"
112#include "MPedestalPix.h"
113
114#include "MCalibrationChargeCam.h"
115#include "MCalibrationChargePix.h"
116
117#include "MCalibrationQECam.h"
118#include "MCalibrationQEPix.h"
119
120#include "MExtractedSignalCam.h"
121#include "MExtractedSignalPix.h"
122
123#include "MPedPhotCam.h"
124#include "MPedPhotPix.h"
125
126#include "MBadPixelsCam.h"
127#include "MBadPixelsPix.h"
128
129#include "MCerPhotEvt.h"
130
131ClassImp(MCalibrateData);
132
133using namespace std;
134
135const TString MCalibrateData::fgNamePedADCContainer = "MPedestalCam";
136const TString MCalibrateData::fgNamePedPhotContainer = "MPedPhotCam";
137// --------------------------------------------------------------------------
138//
139// Default constructor.
140//
141// Sets all pointers to NULL
142//
143// Initializes:
144// - fCalibrationMode to kDefault
145// - fPedestalFlag to kRun
146// - fNamePedADCRunContainer to "MPedestalCam"
147// - fNamePedPhotRunContainer to "MPedPhotCam"
148//
149MCalibrateData::MCalibrateData(CalibrationMode_t calmode,const char *name, const char *title)
150 : fGeomCam(NULL), fPedestal(NULL),
151 fBadPixels(NULL), fCalibrations(NULL), fQEs(NULL), fSignals(NULL),
152 fPedPhot(NULL), fCerPhotEvt(NULL), fPedestalFlag(kNo)
153{
154
155 fName = name ? name : "MCalibrateData";
156 fTitle = title ? title : "Task to calculate the number of photons in one event";
157
158 SetCalibrationMode();
159
160 SetNamePedADCContainer();
161 SetNamePedPhotContainer();
162}
163
164// --------------------------------------------------------------------------
165//
166// The PreProcess searches for the following input containers:
167//
168// - MGeomCam
169// - MPedestalCam
170// - MCalibrationChargeCam
171// - MCalibrationQECam
172// - MExtractedSignalCam
173// - MBadPixelsCam
174//
175// The following output containers are also searched and created if
176// they were not found:
177//
178// - MPedPhotCam
179// - MCerPhotEvt
180//
181Int_t MCalibrateData::PreProcess(MParList *pList)
182{
183 // input containers
184
185 fBadPixels = (MBadPixelsCam*)pList->FindObject(AddSerialNumber("MBadPixelsCam"));
186 if (!fBadPixels)
187 {
188 *fLog << err << AddSerialNumber("MBadPixelsCam") << " not found ... aborting" << endl;
189 return kFALSE;
190 }
191
192 fSignals = 0;
193 fCerPhotEvt = 0;
194 if (fCalibrationMode>kSkip)
195 {
196 fSignals = (MExtractedSignalCam*)pList->FindObject(AddSerialNumber("MExtractedSignalCam"));
197 if (!fSignals)
198 {
199 *fLog << err << AddSerialNumber("MExtractedSignalCam") << " not found ... aborting" << endl;
200 return kFALSE;
201 }
202
203 fCerPhotEvt = (MCerPhotEvt*)pList->FindCreateObj(AddSerialNumber("MCerPhotEvt"));
204 if (!fCerPhotEvt)
205 return kFALSE;
206 }
207
208 fCalibrations = 0;
209 fQEs = 0;
210 if (fCalibrationMode>kNone)
211 {
212 fCalibrations = (MCalibrationChargeCam*)pList->FindObject(AddSerialNumber("MCalibrationChargeCam"));
213 if (!fCalibrations)
214 {
215 *fLog << err << AddSerialNumber("MCalibrationChargeCam") << " not found ... aborting." << endl;
216 return kFALSE;
217 }
218
219 fQEs = (MCalibrationQECam*)pList->FindObject(AddSerialNumber("MCalibrationQECam"));
220 if (!fQEs)
221 {
222 *fLog << err << AddSerialNumber("MCalibrationQECam") << " not found ... aborting." << endl;
223 return kFALSE;
224 }
225 }
226
227 fPedestal = 0;
228 fPedPhot = 0;
229 if (fPedestalFlag)
230 {
231 fPedestal = (MPedestalCam*)pList->FindObject(AddSerialNumber(fNamePedADCContainer), "MPedestalCam");
232 if (!fPedestal)
233 {
234 *fLog << err << AddSerialNumber(fNamePedADCContainer) << " [MPedestalCam] not found ... aborting" << endl;
235 return kFALSE;
236 }
237
238 fPedPhot = (MPedPhotCam*)pList->FindCreateObj("MPedPhotCam", AddSerialNumber(fNamePedPhotContainer));
239 if (!fPedPhot)
240 return kFALSE;
241 }
242
243 return kTRUE;
244}
245
246// --------------------------------------------------------------------------
247//
248// The ReInit searches for the following input containers:
249//
250// - MGeomCam
251//
252// Check for validity of the selected calibration method, switch to a
253// different one in case of need
254//
255// Fill the MPedPhotCam container using the information from MPedestalCam,
256// MExtractedSignalCam and MCalibrationCam
257//
258Bool_t MCalibrateData::ReInit(MParList *pList)
259{
260 fGeomCam = (MGeomCam*)pList->FindObject(AddSerialNumber("MGeomCam"));
261 if (!fGeomCam)
262 {
263 *fLog << err << "No MGeomCam found... aborting." << endl;
264 return kFALSE;
265 }
266
267 if(fCalibrationMode == kBlindPixel && !fQEs->IsBlindPixelMethodValid())
268 {
269 *fLog << warn << "Blind pixel calibration method not valid, switching to F-factor method" << endl;
270 fCalibrationMode = kFfactor;
271 }
272
273 if(fCalibrationMode == kPinDiode && !fQEs->IsPINDiodeMethodValid())
274 {
275 *fLog << warn << "PIN diode calibration method not valid, switching to F-factor method" << endl;
276 fCalibrationMode = kFfactor;
277 }
278
279 if(fCalibrationMode == kCombined && !fQEs->IsCombinedMethodValid())
280 {
281 *fLog << warn << "Combined calibration method not valid, switching to F-factor method" << endl;
282 fCalibrationMode = kFfactor;
283 }
284
285 //
286 // output information or warnings:
287 //
288 switch(fCalibrationMode)
289 {
290 case kBlindPixel:
291 break;
292 case kFfactor:
293 break;
294 case kPinDiode:
295 *fLog << err << "PIN Diode Calibration mode not yet available!" << endl;
296 return kFALSE;
297 break;
298 case kCombined:
299 *fLog << err << "Combined Calibration mode not yet available!" << endl;
300 return kFALSE;
301 break;
302 case kFlatCharge:
303 *fLog << warn << "WARNING - Flat-fielding charges - only for muon calibration!" << endl;
304 break;
305 case kDummy:
306 *fLog << warn << "WARNING - Dummy calibration, no calibration applied!" << endl;
307 break;
308 case kNone:
309 *fLog << warn << "WARNING - No calibration applied!" << endl;
310 break;
311 default:
312 *fLog << warn << "WARNING - Calibration mode value (" << fCalibrationMode << ") not known" << endl;
313 return kFALSE;
314 }
315
316 if (TestPedestalFlag(kRun))
317 if (!CalibratePedestal())
318 return kFALSE;
319
320 return kTRUE;
321}
322
323// --------------------------------------------------------------------------
324//
325// Calibrate the Pedestal values
326//
327Bool_t MCalibrateData::CalibratePedestal()
328{
329 //
330 // Fill MPedPhot container using the informations from
331 // MPedestalCam, MExtractedSignalCam and MCalibrationCam
332 //
333 const Float_t slices = fSignals->GetNumUsedHiGainFADCSlices();
334 const Float_t sqrtslices = TMath::Sqrt(slices);
335
336 // is pixid equal to pixidx ?
337 if ((Int_t)fPedestal->GetSize() != fSignals->GetSize())
338 {
339 *fLog << err << "Sizes of MPedestalCam and MCalibrationCam are different" << endl;
340 return kFALSE;
341 }
342
343 const Int_t n = fPedestal->GetSize();
344 for (Int_t pixid=0; pixid<n; pixid++)
345 {
346 const MPedestalPix &ped = (*fPedestal)[pixid];
347
348 // pedestals/(used FADC slices) in [ADC] counts
349 const Float_t pedes = ped.GetPedestal() * slices;
350 const Float_t pedrms = ped.GetPedestalRms() * sqrtslices;
351
352 //
353 // get phe/ADC conversion factor
354 //
355 Float_t hiloconv;
356 Float_t hiloconverr;
357 Float_t calibConv;
358 Float_t calibConvVar;
359 Float_t calibFFactor;
360 if (!GetConversionFactor(pixid, hiloconv, hiloconverr,
361 calibConv, calibConvVar, calibFFactor))
362 continue;
363
364 //
365 // pedestals/(used FADC slices) in [number of photons]
366 //
367 const Float_t pedphot = pedes * calibConv;
368 const Float_t pedphotrms = pedrms * calibConv;
369
370 (*fPedPhot)[pixid].Set(pedphot, pedphotrms);
371 }
372
373 fPedPhot->SetReadyToSave();
374
375 return kTRUE;
376}
377
378// --------------------------------------------------------------------------
379//
380// Get conversion factor and its error from MCalibrationCam
381//
382Bool_t MCalibrateData::GetConversionFactor(UInt_t pixidx, Float_t &hiloconv, Float_t &hiloconverr,
383 Float_t &calibConv, Float_t &calibConvVar, Float_t &calibFFactor)
384{
385 //
386 // For the moment, we use only a dummy zenith for the calibration:
387 //
388 const Float_t zenith = -1.;
389
390 hiloconv = 1.;
391 hiloconverr = 0.;
392 calibConv = 1.;
393 calibConvVar = 0.;
394 calibFFactor = 0.;
395
396 Float_t calibQE = 1.;
397 Float_t calibQEVar = 0.;
398
399 if(fCalibrationMode!=kNone)
400 {
401 MCalibrationChargePix &pix = (MCalibrationChargePix&)(*fCalibrations)[pixidx];
402
403 hiloconv = pix.GetConversionHiLo ();
404 hiloconverr= pix.GetConversionHiLoErr();
405
406 if (fBadPixels)
407 {
408 MBadPixelsPix &bad = (*fBadPixels)[pixidx];
409 if (bad.IsUnsuitable())
410 return kFALSE;
411 }
412
413 calibConv = pix.GetMeanConvFADC2Phe();
414 calibConvVar = pix.GetMeanConvFADC2PheVar();
415 calibFFactor = pix.GetMeanFFactorFADC2Phot();
416
417 MCalibrationQEPix &qe = (MCalibrationQEPix&) (*fQEs)[pixidx];
418
419 switch(fCalibrationMode)
420 {
421 case kFlatCharge:
422 {
423 MCalibrationChargePix &avpix = (MCalibrationChargePix&)fCalibrations->GetAverageArea(0);
424 calibConv = avpix.GetMean() / (pix.GetMean() * fGeomCam->GetPixRatio(pixidx));
425 calibConvVar = (avpix.GetMeanRelVar() + pix.GetMeanRelVar()) * calibConv * calibConv;
426 if (pix.IsFFactorMethodValid())
427 {
428 const Float_t convmin1 = qe.GetQECascadesFFactor(zenith)/pix.GetMeanConvFADC2Phe();
429 if (convmin1 > 0)
430 calibFFactor *= TMath::Sqrt(convmin1);
431 else
432 calibFFactor = -1.;
433 }
434 }
435 break;
436
437 case kBlindPixel:
438 if (!qe.IsBlindPixelMethodValid())
439 return kFALSE;
440 calibQE = qe.GetQECascadesBlindPixel ( zenith );
441 calibQEVar = qe.GetQECascadesBlindPixelVar( zenith );
442 break;
443
444 case kPinDiode:
445 if (!qe.IsPINDiodeMethodValid())
446 return kFALSE;
447 calibQE = qe.GetQECascadesPINDiode ( zenith );
448 calibQEVar = qe.GetQECascadesPINDiodeVar( zenith );
449 break;
450
451 case kFfactor:
452 if (!pix.IsFFactorMethodValid())
453 return kFALSE;
454 calibQE = qe.GetQECascadesFFactor ( zenith );
455 calibQEVar = qe.GetQECascadesFFactorVar( zenith );
456 break;
457
458 case kCombined:
459 if (!qe.IsCombinedMethodValid())
460 return kFALSE;
461 calibQE = qe.GetQECascadesCombined ( zenith );
462 calibQEVar = qe.GetQECascadesCombinedVar( zenith );
463 break;
464
465 case kDummy:
466 hiloconv = 1.;
467 hiloconverr = 0.;
468 break;
469 } /* switch calibration mode */
470 } /* if(fCalibrationMode!=kNone) */
471 else
472 {
473 calibConv = 1./fGeomCam->GetPixRatio(pixidx);
474 }
475
476 calibConv /= calibQE;
477
478 if (calibConv != 0. && calibQE != 0.)
479 {
480 const Float_t calibConv2 = calibConv*calibConv;
481 calibConvVar = calibConvVar/calibConv2 + calibQEVar/(calibQE*calibQE);
482 calibConvVar *= calibConv2;
483 }
484
485 return kTRUE;
486}
487
488void MCalibrateData::CalibrateData()
489{
490 const UInt_t npix = fSignals->GetSize();
491
492 Float_t hiloconv;
493 Float_t hiloconverr;
494 Float_t calibrationConversionFactor;
495 Float_t calibrationConversionFactorErr;
496 Float_t calibFFactor;
497
498 for (UInt_t pixidx=0; pixidx<npix; pixidx++)
499 {
500 if (!GetConversionFactor(pixidx, hiloconv, hiloconverr,
501 calibrationConversionFactor, calibrationConversionFactorErr, calibFFactor))
502 continue;
503
504 const MExtractedSignalPix &sig = (*fSignals)[pixidx];
505
506 Float_t signal = 0;
507 Float_t signalErr = 0.;
508
509 if (sig.IsLoGainUsed())
510 {
511 signal = sig.GetExtractedSignalLoGain()*hiloconv;
512 signalErr = signal*hiloconverr;
513 }
514 else
515 {
516 if (sig.GetExtractedSignalHiGain() <= 9999.)
517 signal = sig.GetExtractedSignalHiGain();
518 }
519
520 const Float_t nphot = signal*calibrationConversionFactor;
521 const Float_t nphotErr = calibFFactor*TMath::Sqrt(TMath::Abs(nphot));
522
523 //
524 // The following part is the commented first version of the error calculation
525 // Contact Markus Gaug for questions (or wait for the next documentation update...)
526 //
527 /*
528 nphotErr = signal > 0 ? signalErr*signalErr / (signal * signal) : 0.
529 + calibConv > 0 ? calibConvVar / (calibConv * calibConv ) : 0.;
530 nphotErr = TMath::Sqrt(nphotErr) * nphot;
531 */
532
533 MCerPhotPix *cpix = fCerPhotEvt->AddPixel(pixidx, nphot, nphotErr);
534
535 if (sig.GetNumHiGainSaturated() > 0)
536 cpix->SetPixelHGSaturated();
537
538 if (sig.GetNumLoGainSaturated() > 0)
539 cpix->SetPixelSaturated();
540 }
541
542 fCerPhotEvt->FixSize();
543 fCerPhotEvt->SetReadyToSave();
544}
545
546// --------------------------------------------------------------------------
547//
548// Apply the calibration factors to the extracted signal according to the
549// selected calibration method
550//
551Int_t MCalibrateData::Process()
552{
553 /*
554 if (fCalibrations->GetNumPixels() != (UInt_t)fSignals->GetSize())
555 {
556 // FIXME: MExtractedSignal must be of variable size -
557 // like MCerPhotEvt - because we must be able
558 // to reduce size by zero supression
559 // For the moment this check could be done in ReInit...
560 *fLog << err << "MExtractedSignal and MCalibrationCam have different sizes... abort." << endl;
561 return kFALSE;
562 }
563 */
564
565 if (fCalibrationMode!=kSkip)
566 CalibrateData();
567
568 if (TestPedestalFlag(kEvent))
569 if (!CalibratePedestal())
570 return kFALSE;
571
572 return kTRUE;
573}
574
575// --------------------------------------------------------------------------
576//
577// Implementation of SavePrimitive. Used to write the call to a constructor
578// to a macro. In the original root implementation it is used to write
579// gui elements to a macro-file.
580//
581void MCalibrateData::StreamPrimitive(ofstream &out) const
582{
583 out << " " << ClassName() << " " << GetUniqueName() << "(\"";
584 out << "\"" << fName << "\", \"" << fTitle << "\");" << endl;
585
586 if (TestPedestalFlag(kEvent))
587 out << " " << GetUniqueName() << ".EnablePedestalType(MCalibrateData::kEvent)" << endl;
588 if (TestPedestalFlag(kRun))
589 out << " " << GetUniqueName() << ".EnablePedestalType(MCalibrateData::kRun)" << endl;
590
591 if (fCalibrationMode != kDefault)
592 {
593 out << " " << GetUniqueName() << ".SetCalibrationMode(MCalibrateData::";
594 switch (fCalibrationMode)
595 {
596 case kSkip: out << "kSkip"; break;
597 case kNone: out << "kNone"; break;
598 case kFlatCharge: out << "kFlatCharge"; break;
599 case kBlindPixel: out << "kBlindPixel"; break;
600 case kFfactor: out << "kFfactor"; break;
601 case kPinDiode: out << "kPinDiode"; break;
602 case kCombined: out << "kCombined"; break;
603 case kDummy: out << "kDummy"; break;
604 default: out << (int)fCalibrationMode; break;
605 }
606 out << ")" << endl;
607 }
608
609 if (fNamePedADCContainer != fgNamePedADCContainer)
610 {
611 out << " " << GetUniqueName() << ".SetNamePedADCContainer(";
612 out << fNamePedADCContainer.Data() << ");" << endl;
613 }
614
615 if (fNamePedPhotContainer != fgNamePedPhotContainer)
616 {
617 out << " " << GetUniqueName() << ".SetNamePedPhotContainer(";
618 out << fNamePedPhotContainer.Data() << ");" << endl;
619 }
620}
621
622// --------------------------------------------------------------------------
623//
624// Read the setup from a TEnv, eg:
625// MJPedestal.MCalibrateDate.PedestalFlag: no,run,event
626// MJPedestal.MCalibrateDate.CalibrationMode: skip,none,flatcharge,blindpixel,ffactor,pindiode,combined,dummy,default
627//
628Int_t MCalibrateData::ReadEnv(const TEnv &env, TString prefix, Bool_t print)
629{
630 Bool_t rc = kFALSE;
631 if (IsEnvDefined(env, prefix, "PedestalFlag", print))
632 {
633 rc = kTRUE;
634 TString s = GetEnvValue(env, prefix, "PedestalFlag", "");
635 s.ToLower();
636 if (s.BeginsWith("no"))
637 SetPedestalFlag(kNo);
638 if (s.BeginsWith("run"))
639 SetPedestalFlag(kRun);
640 if (s.BeginsWith("event"))
641 SetPedestalFlag(kEvent);
642 }
643
644 if (IsEnvDefined(env, prefix, "CalibrationMode", print))
645 {
646 rc = kTRUE;
647 TString s = GetEnvValue(env, prefix, "CalibrationMode", "");
648 s.ToLower();
649 if (s.BeginsWith("skip"))
650 SetCalibrationMode(kSkip);
651 if (s.BeginsWith("none"))
652 SetCalibrationMode(kNone);
653 if (s.BeginsWith("flatcharge"))
654 SetCalibrationMode(kFlatCharge);
655 if (s.BeginsWith("blindpixel"))
656 SetCalibrationMode(kBlindPixel);
657 if (s.BeginsWith("ffactor"))
658 SetCalibrationMode(kFfactor);
659 if (s.BeginsWith("pindiode"))
660 SetCalibrationMode(kPinDiode);
661 if (s.BeginsWith("combined"))
662 SetCalibrationMode(kCombined);
663 if (s.BeginsWith("dummy"))
664 SetCalibrationMode(kDummy);
665 if (s.BeginsWith("default"))
666 SetCalibrationMode();
667 }
668
669 return rc;
670}
Note: See TracBrowser for help on using the repository browser.