/* ======================================================================== *\ ! ! * ! * This file is part of MARS, the MAGIC Analysis and Reconstruction ! * Software. It is distributed to you in the hope that it can be a useful ! * and timesaving tool in analysing Data of imaging Cerenkov telescopes. ! * It is distributed WITHOUT ANY WARRANTY. ! * ! * Permission to use, copy, modify and distribute this software and its ! * documentation for any purpose is hereby granted without fee, ! * provided that the above copyright notice appear in all copies and ! * that both that copyright notice and this permission notice appear ! * in supporting documentation. It is provided "as is" without express ! * or implied warranty. ! * ! ! ! Author(s): Markus Gaug 02/2004 ! ! Copyright: MAGIC Software Development, 2000-2004 ! ! \* ======================================================================== */ ///////////////////////////////////////////////////////////////////////////// // // MCalibrationChargePINDiode // // Storage container of the fit results of the PIN Diode signal // (from MHCalibrationChargePINDiode). The PIN Diode is not yet working, so // is the documentation for the moment. // // The Flux is calculated in photons per mm^2 in the camera plane. // // Currently, the following numbers are implemented: // // Area of PIN Diode Ap: 63.5 +- 0.1 mm^2 // Transparency of window T: 0.88 +- 0.05 // // Ratio of areas: // // Distance of PIN Diode to pulser D1: 1.139 +- 0.005 m // Distance of Inner Pixel to pulser D2: 18.135 +- 0.015 m // // D1*D1 // gkSolidAngleRatio = -------- = 7.06 * 10^-5 // Ap*T*D2*D2 // // gkSolidAngleRatioErr = 0.4 * 10^-5 // ///////////////////////////////////////////////////////////////////////////// #include "MCalibrationChargePINDiode.h" #include "MCalibrationChargePix.h" #include "MLog.h" #include "MLogManip.h" ClassImp(MCalibrationChargePINDiode); using namespace std; const Float_t MCalibrationChargePINDiode::fgChargeToPhotons = -1.; const Float_t MCalibrationChargePINDiode::fgChargeToPhotonsErr = -1.; const Float_t MCalibrationChargePINDiode::gkAbsorptionWindow = 0.88; const Float_t MCalibrationChargePINDiode::gkSolidAngleRatio = 0.0000705; const Float_t MCalibrationChargePINDiode::gkSolidAngleRatioErr = 0.000004; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEGreen = 0.84; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEBlue = 0.74; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEUV = 0.40; const Float_t MCalibrationChargePINDiode::gkPINDiodeQECT1 = 0.40; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEGreenErr = 0.015; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEBlueErr = 0.015; const Float_t MCalibrationChargePINDiode::gkPINDiodeQEUVErr = 0.015; const Float_t MCalibrationChargePINDiode::gkPINDiodeQECT1Err = 0.015; // -------------------------------------------------------------------------- // // Default Constructor. // // Sets: // - fCalibFlags to 0 // - fChargeToPhotons to fgChargeToPhotons // - fChargeToPhotonsVar to fgChargeToPhotonsErr*fgChargeToPhotonsErr // // Calls: // - Clear() // MCalibrationChargePINDiode::MCalibrationChargePINDiode(const char *name, const char *title) : fCalibFlags(0) { fName = name ? name : "MCalibrationChargePINDiode"; fTitle = title ? title : "Container of the fit results of MHCalibrationChargePINDiode"; SetChargeToPhotons(); SetChargeToPhotonsErr(); Clear(); } // ------------------------------------------------------------------------ // // Sets: // - all flags to kFALSE // - all variables to -1. // // Calls: // - MCalibrationPix::Clear() // void MCalibrationChargePINDiode::Clear(Option_t *o) { SetOscillating ( kFALSE ); SetChargeFitValid ( kFALSE ); SetTimeFitValid ( kFALSE ); SetColor ( MCalibrationCam::kNONE ); fAbsTimeMean = -1.; fAbsTimeRms = -1.; fFluxOutsidePlexiglass = -1.; fFluxOutsidePlexiglassVar = -1.; fNumPhotons = -1.; fNumPhotonsVar = -1.; fPed = -1.; fPedRms = -1.; fRmsChargeMean = -1.; fRmsChargeMeanErr = -1.; fRmsChargeSigma = -1.; fRmsChargeSigmaErr = -1.; MCalibrationPix::Clear(); } // -------------------------------------------------------------------------- // // Set the pedestals from outside // void MCalibrationChargePINDiode::SetPedestal(Float_t ped, Float_t pedrms) { fPed = ped; fPedRms = pedrms; } // -------------------------------------------------------------------------- // // Set the Oscillating Bit from outside // void MCalibrationChargePINDiode::SetOscillating( const Bool_t b) { b ? SETBIT(fCalibFlags,kOscillating) : CLRBIT(fCalibFlags,kOscillating); } // -------------------------------------------------------------------------- // // Set the ChargeFitValid Bit from outside // void MCalibrationChargePINDiode::SetChargeFitValid(Bool_t b ) { b ? SETBIT(fCalibFlags, kChargeFitValid) : CLRBIT(fCalibFlags, kChargeFitValid); } // -------------------------------------------------------------------------- // // Set the TimeFitValid Bit from outside // void MCalibrationChargePINDiode::SetTimeFitValid(Bool_t b ) { b ? SETBIT(fCalibFlags, kTimeFitValid) : CLRBIT(fCalibFlags, kTimeFitValid); } // -------------------------------------------------------------------------- // // Set the FluxOutsidePlexiglassAvailable Bit from outside // void MCalibrationChargePINDiode::SetFluxOutsidePlexiglassAvailable (const Bool_t b) { b ? SETBIT(fCalibFlags, kFluxOutsidePlexiglassAvailable) : CLRBIT(fCalibFlags, kFluxOutsidePlexiglassAvailable); } // -------------------------------------------------------------------------- // // Return -1 if fFluxOutsidePlexiglassVar is smaller than 0. // Return square root of fFluxOutsidePlexiglassVar // Float_t MCalibrationChargePINDiode::GetFluxOutsidePlexiglassErr() const { if (fFluxOutsidePlexiglassVar < 0.) return -1.; return TMath::Sqrt(fFluxOutsidePlexiglassVar); } // -------------------------------------------------------------------------- // // Return -1 if fFluxOutsidePlexiglassVar is smaller than 0. // Return -1 if fFluxOutsidePlexiglass is 0. // Return fFluxOutsidePlexiglassVar / fFluxOutsidePlexiglass^2 // Float_t MCalibrationChargePINDiode::GetFluxOutsidePlexiglassRelVar() const { if (fFluxOutsidePlexiglassVar < 0.) return -1.; if (fFluxOutsidePlexiglass == 0.) return -1.; return fFluxOutsidePlexiglassVar / (fFluxOutsidePlexiglass * fFluxOutsidePlexiglass ); } // -------------------------------------------------------------------------- // // Return -1 if fNumPhotonsVar is smaller than 0. // Return square root of fNumPhotonsVar // Float_t MCalibrationChargePINDiode::GetNumPhotonsErr() const { if (fNumPhotonsVar < 0.) return -1.; return TMath::Sqrt(fNumPhotonsVar); } // -------------------------------------------------------------------------- // // Return -1 if fNumPhotonsVar is smaller than 0. // Return -1 if fNumPhotons is 0. // Return fNumPhotonsVar / (fNumPhotons^2 ) // Float_t MCalibrationChargePINDiode::GetNumPhotonsRelVar() const { if (fNumPhotonsVar < 0.) return -1.; if (fNumPhotons == 0.) return -1.; return fNumPhotonsVar / fNumPhotons / fNumPhotons ; } // -------------------------------------------------------------------------- // // Return -1 if gkPINDiodeQEGreenErr is smaller than 0. // Return -1 if gkPINDiodeQEGreen is 0. // Return gkPINDiodeQEGreenErr^2 / (gkPINDiodeQEGreen^2 ) // const Float_t MCalibrationChargePINDiode::GetPINDiodeQEGreenRelVar() const { if (gkPINDiodeQEGreenErr < 0.) return -1.; if (gkPINDiodeQEGreen == 0.) return -1.; return gkPINDiodeQEGreenErr * gkPINDiodeQEGreenErr / gkPINDiodeQEGreen / gkPINDiodeQEGreen ; } // -------------------------------------------------------------------------- // // Return -1 if gkPINDiodeQEBlueErr is smaller than 0. // Return -1 if gkPINDiodeQEBlue is 0. // Return gkPINDiodeQEBlueErr^2 / gkPINDiodeQEBlue^2 // const Float_t MCalibrationChargePINDiode::GetPINDiodeQEBlueRelVar() const { if (gkPINDiodeQEBlueErr < 0.) return -1.; if (gkPINDiodeQEBlue == 0.) return -1.; return gkPINDiodeQEBlueErr * gkPINDiodeQEBlueErr / gkPINDiodeQEBlue / gkPINDiodeQEBlue ; } // -------------------------------------------------------------------------- // // Return -1 if gkPINDiodeQEUVErr is smaller than 0. // Return -1 if gkPINDiodeQEUV is 0. // Return gkPINDiodeQEUVErr ^2 / gkPINDiodeQEUV^2 // const Float_t MCalibrationChargePINDiode::GetPINDiodeQEUVRelVar() const { if (gkPINDiodeQEUVErr < 0.) return -1.; if (gkPINDiodeQEUV == 0.) return -1.; return gkPINDiodeQEUVErr * gkPINDiodeQEUVErr / gkPINDiodeQEUV / gkPINDiodeQEUV ; } // -------------------------------------------------------------------------- // // Return -1 if gkPINDiodeQECT1Err is smaller than 0. // Return -1 if gkPINDiodeQECT1 is 0. // Return gkPINDiodeQECT1Err ^2 / gkPINDiodeQECT1^2 // const Float_t MCalibrationChargePINDiode::GetPINDiodeQECT1RelVar() const { if (gkPINDiodeQECT1Err < 0.) return -1.; if (gkPINDiodeQECT1 == 0.) return -1.; return gkPINDiodeQECT1Err * gkPINDiodeQECT1Err / gkPINDiodeQECT1 / gkPINDiodeQECT1 ; } // -------------------------------------------------------------------------- // // Return -1 if gkSolidAngleRatioErr is smaller than 0. // Return -1 if gkSolidAngleRatio is 0. // Return gkSolidAngleRatioErr ^2 / gkSolidAngleRatio^2 // const Float_t MCalibrationChargePINDiode::GetSolidAngleRatioRelVar() const { if (gkSolidAngleRatioErr < 0.) return -1.; if (gkSolidAngleRatio == 0.) return -1.; return gkSolidAngleRatioErr * gkSolidAngleRatioErr / gkSolidAngleRatio / gkSolidAngleRatio ; } // -------------------------------------------------------------------------- // // Test bit kChargeFitValid // Bool_t MCalibrationChargePINDiode::IsChargeFitValid() const { return TESTBIT(fCalibFlags, kChargeFitValid); } // -------------------------------------------------------------------------- // // Test bit kFluxOutsidePlexiglassAvailable // Bool_t MCalibrationChargePINDiode::IsFluxOutsidePlexiglassAvailable() const { return TESTBIT(fFlags,kFluxOutsidePlexiglassAvailable); } // -------------------------------------------------------------------------- // // Test bit kTimeFitValid // Bool_t MCalibrationChargePINDiode::IsTimeFitValid() const { return TESTBIT(fCalibFlags, kTimeFitValid); } // -------------------------------------------------------------------------- // // Test bit kOscillating // Bool_t MCalibrationChargePINDiode::IsOscillating() const { return TESTBIT(fCalibFlags, kOscillating); } // -------------------------------------------------------------------------- // // Return kFALSE if IsChargeFitValid() is kFALSE // // Calculate fFluxOutsidePlexiglass with the formula: // - fFluxOutsidePlexiglass = fNumPhotons*gkSolidAngleRatio / gkPINDiodeQE (of the corr. colour) // - fFluxOutsidePlexiglassVar = sqrt( fNumPhotonsVar / ( fNumPhotons * fNumPhotons ) // + ( gkSolidAngleRatioErr * gkSolidAngleRatioErr / gkSolidAngleRatio / gkSolidAngleRatio ) // + ( gkPINDiodeQEErr * gkPINDiodeQEErr / gkPINDiodeQE / gkPINDiodeQE ) // ) * fFluxOutsidePlexiglass * * fFluxOutsidePlexiglass // // If the fFluxOutsidePlexiglass is smaller than 0., return kFALSE // If the Variance is smaller than 0., return kFALSE // // SetFluxOutsidePlexiglassAvailable() and return kTRUE // Bool_t MCalibrationChargePINDiode::CalcFluxOutsidePlexiglass() { if (IsChargeFitValid()) return kFALSE; // // Start calculation of number of photons per mm^2 on an inner pixel: // Correct for the distance between camera and PIN Diode and for different areas. // switch (fColor) { case MCalibrationCam::kGREEN: fFluxOutsidePlexiglass = fNumPhotons * gkSolidAngleRatio * gkPINDiodeQEGreen; fFluxOutsidePlexiglassVar = GetNumPhotonsRelVar() + GetSolidAngleRatioRelVar() + GetPINDiodeQEGreenRelVar(); break; case MCalibrationCam::kBLUE: fFluxOutsidePlexiglass = fNumPhotons * gkSolidAngleRatio * gkPINDiodeQEBlue; fFluxOutsidePlexiglassVar = GetNumPhotonsRelVar() + GetSolidAngleRatioRelVar() + GetPINDiodeQEBlueRelVar(); break; case MCalibrationCam::kUV: fFluxOutsidePlexiglass = fNumPhotons * gkSolidAngleRatio * gkPINDiodeQEUV; fFluxOutsidePlexiglassVar = GetNumPhotonsRelVar() + GetSolidAngleRatioRelVar() + GetPINDiodeQEUVRelVar(); break; case MCalibrationCam::kCT1: default: fFluxOutsidePlexiglass = fNumPhotons * gkSolidAngleRatio * gkPINDiodeQECT1; fFluxOutsidePlexiglassVar = GetNumPhotonsRelVar() + GetSolidAngleRatioRelVar() + GetPINDiodeQECT1RelVar(); break; } // // Finish calculation of errors -> convert from relative variance to absolute variance // fFluxOutsidePlexiglassVar *= fFluxOutsidePlexiglass * fFluxOutsidePlexiglass; if (fFluxOutsidePlexiglass < 0.) return kFALSE; if (fFluxOutsidePlexiglassVar < 0.) return kFALSE; SetFluxOutsidePlexiglassAvailable(); *fLog << inf << endl; *fLog << inf << " Mean Photon flux [ph/mm^2] outside Plexiglass: " << Form("%5.3f%s%5.3f",fFluxOutsidePlexiglass," +- ",GetFluxOutsidePlexiglassErr()) << endl; return kTRUE; }