/* ======================================================================== *\ ! ! * ! * This file is part of MARS, the MAGIC Analysis and Reconstruction ! * Software. It is distributed to you in the hope that it can be a useful ! * and timesaving tool in analysing Data of imaging Cerenkov telescopes. ! * It is distributed WITHOUT ANY WARRANTY. ! * ! * Permission to use, copy, modify and distribute this software and its ! * documentation for any purpose is hereby granted without fee, ! * provided that the above copyright notice appear in all copies and ! * that both that copyright notice and this permission notice appear ! * in supporting documentation. It is provided "as is" without express ! * or implied warranty. ! * ! ! ! Author(s): Markus Gaug 02/2004 ! ! Copyright: MAGIC Software Development, 2000-2004 ! ! \* ======================================================================== */ ///////////////////////////////////////////////////////////////////////////// // // MCalibrationQEPix // // Storage container of the calibrated Quantrum Efficiency of one pixel. // This container (like MCalibrationQECam) is designed to persist during // several eventloops over different calibration files, especially those // with different colour LEDs. This class contains all measured Quantum // Efficiencies with the calibration system for each individual pixel. // // At the moment, this calibration works in the following steps: // // 1) MHCalibrationChargeCam extracts mean and sigma (and its errors) of // the summed FADC slices distribution and stores them in MCalibrationCam // // 2) MHCalibrationChargeBlindPix extracts the mean of a Poisson fit to the // single photo-electron spectrum and stores it in MCalibrationChargeBlindPix // // 3) MHCalibrationChargePINDiode extracts the mean of a charge distribution // of the signals collected by the PIN Diode and stores it in // MCalibrationChargePINDiode // // 4) MCalibrationChargeCalc calculates for every pixel the number of // photo-electrons with the F-Factor method and stores them in MCalibrationChargePix // // 5) MCalibrationChargeCalc calculates the (weighted) average number of photo- // electrons from the pixels with the area index 0 (Inner pixels for the MAGIC // camera) and divides this number by gkDefaultQEGreen, gkDefaultQEBlue, // gkDefaultQEUV or gkDefaultQECT1, depending on the used pulser LED colour, // and further by MCalibrationQECam::gkPlexiglassQE. The obtained number is then // divided further by MGeomCam::GetPixRatio(pixel idx) (1. for inner pixels) and // gives the NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS // of the camera, obtained with the F-Factor method. (In the case of the MAGIC camera, // this number is thus BY CONSTRUCTION four times bigger for the outer pixels than for // the inner ones.) // // 6) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera // from the MCalibrationChargeBlindPix and multiplies it with the light guides area // of each pixel (MGeomPix::GetA()) and divides it by the quantum efficiency of the // plexi-glass (MCalibrationQECam::gkPlexiglassQE). The obtained number gives the // NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS of the camera, // obtained with the Blind Pixel method. // // 7) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera // from the MCalibrationChargePINDiode and multiplies it with the light guides area // of each pixel (MGeomPix::GetA()). The obtained number gives the NUMBER OF PHOTONS // incident on every pixels light guid OUTSIDE THE PLEXIGLASS of the camera, // obtained with the PIN Diode method. // // 8) Each of the three photons numbers is divided by the mean sum of FADC counts // and defined as MEASURED QUANTUM EFFICIENCY AT A GIVEN COLOUR. They are stored // in the variables SetQEBlindPixel(qe, color), SetQEFFactor(qe,color) and // SetQEPINDiode(qe,color) // // 9) Errors are propagated and corresponding variances get stored in // SetQEBlindPixelVar(var,color), SetQEFFactorVar(var,color) and // SetQEPINDiodeVar(var,color). // // 10) After every eventloop, MCalibrationChargeCalc calls the functions UpdateBlindPixelMethod(), // UpdateFFactorMethod() and UpdatePINDiodeMethod() which calculate the ratio // measured QE / gkDefaultQEGreen (or gkDefaultQEBlue or gkDefaultQEUV or gkDefaultQECT1) // and calculates an weighted average of these quantum-efficiency normalizations obtained // by one of the three methods. // // 11) A call to GetQECascadesBlindPixel(zenith), GetQECascadesFFactor(zenith) or // GetQECascadesPINDiode(zenith) returns then the normalization multiplied with an average QE // folded into a cascades spectrum. This number should be dependent on zenith angle, but // this feature is not yet implemented, instead a fixed number gkDefaultAverageQE is used. // // The number gkDefaultAverageQE = 0.18 +- 0.02 can be obtained in the following way: // // * Transmission probability Plexiglass: 0.96 // // * Averaged QE coated PMTs: zenith value // 0. 0.237 // 20. 0.237 // 40. 0.236 // 60. 0.234 // (from D.Paneque et al., NIM A 504, 2003, 109-115 // // * PMT photoelectron collection efficiency: 0.9 // (from D.Paneque, email 14.2.2004) // // * Light guides efficiency: 0.94 // (from D.Paneque, email 14.2.2004) // // "Concerning the light guides effiency estimation... Daniel Ferenc // is preparing some work (simulations) to estimate it. Yet so far, he has // been busy with other stuff, and this work is still UNfinished. // // The estimation I did comes from: // 1) Reflectivity of light guide walls is 85 % (aluminum) // 2) At ZERO degree light incidence, 37% of the light hits such walls // (0.15X37%= 5.6% of light lost) // 3) When increasing the light incidence angle, more and more light hits // the walls. // // However, the loses due to larger amount of photons hitting the walls is more // or less counteracted by the fact that more and more photon trajectories cross // the PMT photocathode twice, increasing the effective sensitivity of the PMT. // //Begin_Html /* */ //End_Html // // The plot shows the normalized spectrum of photo-electrons preceding from // a typical spectrum of Cherenkov photons produced by an atmospheric shower. The // green line is for observation zenith angles of 20 deg. and the red line for // 60 deg. The overall effective QE drops from about 20.8 to about 19.8. // // Jurgen Gebauer did some quick measurements about this issue. I attach a // plot. You can see that the angular dependence is (more or less) in agreement with a // CosTheta function (below 20-25 degrees), which is the variation of the entrance // window cross section. So, in first approximation, no losses when increasing light // incidence angle; and therefore, the factor 0.94. // //Begin_Html /* */ //End_Html // // // See also: MJCalibration, MCalibrationChargeCalc, // MCalibrationChargeCam, MCalibrationChargePix, // MHCalibrationChargeCam, MHCalibrationChargePix, // MHCalibrationChargePINDiode, MHCalibrationChargeBlindPix // ///////////////////////////////////////////////////////////////////////////// #include "MCalibrationQEPix.h" #include "MCalibrationCam.h" #include "MLog.h" #include "MLogManip.h" #include "TArrayF.h" #include "TArrayC.h" ClassImp(MCalibrationQEPix); using namespace std; const Float_t MCalibrationQEPix::gkDefaultQEGreen = 0.192; const Float_t MCalibrationQEPix::gkDefaultQEBlue = 0.27; const Float_t MCalibrationQEPix::gkDefaultQEUV = 0.285; const Float_t MCalibrationQEPix::gkDefaultQECT1 = 0.285; const Float_t MCalibrationQEPix::gkDefaultQEGreenErr = 0.05 ; const Float_t MCalibrationQEPix::gkDefaultQEBlueErr = 0.07 ; const Float_t MCalibrationQEPix::gkDefaultQEUVErr = 0.07 ; const Float_t MCalibrationQEPix::gkDefaultQECT1Err = 0.07 ; const Float_t MCalibrationQEPix::gkDefaultAverageQE = 0.18; const Float_t MCalibrationQEPix::gkDefaultAverageQEErr = 0.02; // -------------------------------------------------------------------------- // // Default Constructor: // // Initializes all TArrays to MCalibrationCam::gkNumPulserColors // // Calls: // - Clear() // MCalibrationQEPix::MCalibrationQEPix(const char *name, const char *title) : fAverageQE ( gkDefaultAverageQE ) { fName = name ? name : "MCalibrationQEPix"; fTitle = title ? title : "Container of the calibrated quantum efficiency "; fQEBlindPixel .Set( MCalibrationCam::gkNumPulserColors ); fQEBlindPixelVar .Set( MCalibrationCam::gkNumPulserColors ); fQECombined .Set( MCalibrationCam::gkNumPulserColors ); fQECombinedVar .Set( MCalibrationCam::gkNumPulserColors ); fQEFFactor .Set( MCalibrationCam::gkNumPulserColors ); fQEFFactorVar .Set( MCalibrationCam::gkNumPulserColors ); fQEPINDiode .Set( MCalibrationCam::gkNumPulserColors ); fQEPINDiodeVar .Set( MCalibrationCam::gkNumPulserColors ); fValidFlags .Set( MCalibrationCam::gkNumPulserColors ); Clear(); } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the blind pixel method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAverageBlindPixelQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsBlindPixelMethodValid (col)) { const Float_t newavqe = GetQEBlindPixel(col) / GetDefaultQE (col) ; const Float_t newavqevar = ( GetQEBlindPixelRelVar(col) + GetDefaultQERelVar(col) ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe * weight; sumw += weight; } } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the combination of the three methods // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAverageCombinedQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsCombinedMethodValid (col)) { const Float_t newavqe = GetQECombined(col) / GetDefaultQE (col) ; const Float_t newavqevar = ( GetQECombinedRelVar(col) + GetDefaultQERelVar(col) ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe * weight; sumw += weight; } } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the F-Factor method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAverageFFactorQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsFFactorMethodValid (col)) { const Float_t newavqe = GetQEFFactor(col) / GetDefaultQE (col) ; const Float_t newavqevar = ( GetQEFFactorRelVar(col) + GetDefaultQERelVar(col) ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe *weight; sumw += weight; } } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the PIN Diode method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAveragePINDiodeQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsPINDiodeMethodValid (col)) { const Float_t newavqe = GetQEPINDiode(col) / GetDefaultQE (col) ; const Float_t newavqevar = ( GetQEPINDiodeRelVar(col) + GetDefaultQERelVar(col) ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe *weight; sumw += weight; } } // ------------------------------------------------------------------------ // // Sets all quantum efficiencies to the gkDefaultQE* // Sets all Variances to the square root of gkDefaultQE*Err // Sets all flags to kFALSE // Sets all fAvNorm-Variables to 1.; // Sets all fAvNorm-Variances to 0.; // // Calls: // - MCalibrationPix::Clear() // void MCalibrationQEPix::Clear(Option_t *o) { SetAverageQEBlindPixelAvailable ( kFALSE ); SetAverageQEFFactorAvailable ( kFALSE ); SetAverageQECombinedAvailable ( kFALSE ); SetAverageQEPINDiodeAvailable ( kFALSE ); fQEBlindPixel [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEBlindPixelVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQEFFactor [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEFFactorVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQECombined [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQECombinedVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQEPINDiode [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEPINDiodeVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kGREEN); fQEBlindPixel [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEBlindPixelVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQEFFactor [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEFFactorVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQECombined [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQECombinedVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQEPINDiode [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEPINDiodeVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kBLUE); fQEBlindPixel [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEBlindPixelVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQEFFactor [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEFFactorVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQECombined [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQECombinedVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQEPINDiode [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEPINDiodeVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kUV); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kUV); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kUV); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kUV); fQEBlindPixel [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEBlindPixelVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQEFFactor [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEFFactorVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQECombined [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQECombinedVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQEPINDiode [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEPINDiodeVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kCT1); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kCT1); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kCT1); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kCT1); fAvNormBlindPixel = 1.; fAvNormBlindPixelVar = 0.; fAvNormCombined = 1.; fAvNormCombinedVar = 0.; fAvNormFFactor = 1.; fAvNormFFactorVar = 0.; fAvNormPINDiode = 1.; fAvNormPINDiodeVar = 0.; MCalibrationPix::Clear(); } // ----------------------------------------------------------------- // // Return the average Default QE (depending on zenith angle) // const Float_t MCalibrationQEPix::GetAverageQE( const Float_t zenith ) const { // return gkDefaultAverageQE ; return fAverageQE; } // ----------------------------------------------------------------- // // Return the relative variance of the average Default QE (depending on zenith angle) // const Float_t MCalibrationQEPix::GetAverageQERelVar( const Float_t zenith ) const { return gkDefaultAverageQEErr * gkDefaultAverageQEErr / (gkDefaultAverageQE * gkDefaultAverageQE ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (Blind Pixel Method) // const Float_t MCalibrationQEPix::GetAvNormBlindPixelRelVar( ) const { return fAvNormBlindPixelVar / (fAvNormBlindPixel * fAvNormBlindPixel ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (Combined Method) // const Float_t MCalibrationQEPix::GetAvNormCombinedRelVar( ) const { return fAvNormCombinedVar / (fAvNormCombined * fAvNormCombined ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (F-Factor Method) // const Float_t MCalibrationQEPix::GetAvNormFFactorRelVar( ) const { return fAvNormFFactorVar / (fAvNormFFactor * fAvNormFFactor ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (PIN Diode Method) // const Float_t MCalibrationQEPix::GetAvNormPINDiodeRelVar( ) const { return fAvNormPINDiodeVar / (fAvNormPINDiode * fAvNormPINDiode ); } // ------------------------------------------------------------------------------ // // Get the default Quantum efficiency for pulser colour "col" // Float_t MCalibrationQEPix::GetDefaultQE( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkDefaultQEGreen; break; case MCalibrationCam::kBLUE: return gkDefaultQEBlue; break; case MCalibrationCam::kUV: return gkDefaultQEUV; break; case MCalibrationCam::kCT1: return gkDefaultQECT1; break; default: return gkDefaultQECT1; break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the relative variance of the default Quantum efficiency for pulser colour "col" // Float_t MCalibrationQEPix::GetDefaultQERelVar( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkDefaultQEGreenErr * gkDefaultQEGreenErr / (gkDefaultQEGreen * gkDefaultQEGreen ); break; case MCalibrationCam::kBLUE: return gkDefaultQEBlueErr * gkDefaultQEBlueErr / (gkDefaultQEBlue * gkDefaultQEBlue ); break; case MCalibrationCam::kUV: return gkDefaultQEUVErr * gkDefaultQEUVErr / (gkDefaultQEUV * gkDefaultQEUV ); break; case MCalibrationCam::kCT1: return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 ); break; default: return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 ); break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEBlindPixel( const MCalibrationCam::PulserColor_t col ) const { return fQEBlindPixel[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEBlindPixelErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEBlindPixelVar[col] < 0.) return -1.; return TMath::Sqrt(fQEBlindPixelVar[col]); } // ------------------------------------------------------------------------------ // // Get the relative variance of the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEBlindPixelRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEBlindPixelVar[col] < 0.) return -1.; if (fQEBlindPixel[col] < 0.) return -1.; return fQEBlindPixelVar[col] / ( fQEBlindPixel[col] * fQEBlindPixel[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the combination of the three methods // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQECombined( const MCalibrationCam::PulserColor_t col ) const { return fQECombined[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the combination of the three methods // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQECombinedErr( const MCalibrationCam::PulserColor_t col ) const { if (fQECombinedVar[col] < 0.) return -1.; return TMath::Sqrt(fQECombinedVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the combination of // the three methods, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQECombinedRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQECombinedVar[col] < 0.) return -1.; if (fQECombined[col] < 0.) return -1.; return fQECombinedVar[col] / ( fQECombined[col] * fQECombined[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the F-Factor method // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEFFactor( const MCalibrationCam::PulserColor_t col ) const { return fQEFFactor[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the F-Factor method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEFFactorErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEFFactorVar[col] < 0.) return -1.; return TMath::Sqrt(fQEFFactorVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the F-Factor method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEFFactorRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEFFactorVar[col] < 0.) return -1.; if (fQEFFactor[col] < 0.) return -1.; return fQEFFactorVar[col] / ( fQEFFactor[col] * fQEFFactor[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the PIN-Diode method // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEPINDiode( const MCalibrationCam::PulserColor_t col ) const { return fQEPINDiode[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the PIN Diode method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEPINDiodeErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEPINDiodeVar[col] < 0.) return -1.; return TMath::Sqrt(fQEPINDiodeVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the PIN Diode method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEPINDiodeRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEPINDiodeVar[col] < 0.) return -1.; if (fQEPINDiode[col] < 0.) return -1.; return fQEPINDiodeVar[col] / ( fQEPINDiode[col] * fQEPINDiode[col] ); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the blind pixel method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixel( const Float_t zenith ) const { return fAvNormBlindPixel * GetAverageQE ( zenith ); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the blind pixel method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixelVar( const Float_t zenith ) const { return ( GetAvNormBlindPixelRelVar() + GetAverageQERelVar(zenith)) * GetQECascadesBlindPixel(zenith) * GetQECascadesBlindPixel(zenith); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the blind pixel method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixelErr( const Float_t zenith ) const { const Float_t var = GetQECascadesBlindPixelVar(zenith); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the combination of the three methods and averaged over the results // from the different colours. // Float_t MCalibrationQEPix::GetQECascadesCombined( const Float_t zenith ) const { return fAvNormCombined * GetAverageQE ( zenith ); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the combined method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesCombinedErr( const Float_t zenith ) const { const Float_t var = GetQECascadesCombinedVar(zenith); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the combination of the three methods and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesCombinedVar( const Float_t zenith ) const { return ( GetAvNormCombinedRelVar() + GetAverageQERelVar(zenith)) * GetQECascadesCombined(zenith) * GetQECascadesCombined(zenith); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the F-Factor method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactor( const Float_t zenith ) const { return fAvNormFFactor * GetAverageQE ( zenith ); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the F-Factor method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactorErr( const Float_t zenith ) const { const Float_t var = GetQECascadesFFactorVar(zenith); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the F-Factor method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactorVar( const Float_t zenith ) const { return ( GetAvNormFFactorRelVar() + GetAverageQERelVar(zenith)) * GetQECascadesFFactor(zenith) * GetQECascadesFFactor(zenith); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the PIN Diode method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiode( const Float_t zenith ) const { return fAvNormPINDiode * GetAverageQE ( zenith ); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the PIN Diode method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiodeErr( const Float_t zenith ) const { const Float_t var = GetQECascadesPINDiodeVar(zenith); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the PIN Diode method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiodeVar( const Float_t zenith ) const { return ( GetAvNormPINDiodeRelVar() + GetAverageQERelVar(zenith)) * GetQECascadesPINDiode(zenith) * GetQECascadesPINDiode(zenith); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the blind pixel method // Bool_t MCalibrationQEPix::IsAverageQEBlindPixelAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the combination of the three methods // Bool_t MCalibrationQEPix::IsAverageQECombinedAvailable() const { return TESTBIT(fAvailableFlags,kAverageQECombinedAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the F-Factor method // Bool_t MCalibrationQEPix::IsAverageQEFFactorAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEFFactorAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the PIN Diode method // Bool_t MCalibrationQEPix::IsAverageQEPINDiodeAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the blind pixel method // Bool_t MCalibrationQEPix::IsBlindPixelMethodValid () const { if (IsBlindPixelMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the combination // of the three methods // Bool_t MCalibrationQEPix::IsCombinedMethodValid () const { if (IsCombinedMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the F-Factor method // Bool_t MCalibrationQEPix::IsFFactorMethodValid () const { if (IsFFactorMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the PIN Diode method // Bool_t MCalibrationQEPix::IsPINDiodeMethodValid () const { if (IsPINDiodeMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the Blind Pixel method // Bool_t MCalibrationQEPix::IsBlindPixelMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kBlindPixelMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the combination of // the three methods // Bool_t MCalibrationQEPix::IsCombinedMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kCombinedMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the F-Factor method // Bool_t MCalibrationQEPix::IsFFactorMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kFFactorMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the PIN Diode method // Bool_t MCalibrationQEPix::IsPINDiodeMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kPINDiodeMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit Average QE Blind Pixel method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEBlindPixelAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); else CLRBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE combination of three methods available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQECombinedAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQECombinedAvailable); else CLRBIT(fAvailableFlags,kAverageQECombinedAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE F-Factor method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEFFactorAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEFFactorAvailable); else CLRBIT(fAvailableFlags,kAverageQEFFactorAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE PIN Diode method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEPINDiodeAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); else CLRBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); } // ------------------------------------------------------------------------------ // // Set the bit QE Blind Pixel method available from colour "col" // void MCalibrationQEPix::SetBlindPixelMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kBlindPixelMethodValid); else CLRBIT(fValidFlags[ col ],kBlindPixelMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE Combination of three methods available from colour "col" // void MCalibrationQEPix::SetCombinedMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kCombinedMethodValid); else CLRBIT(fValidFlags[ col ],kCombinedMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE F-Factor method available from colour "col" // void MCalibrationQEPix::SetFFactorMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kFFactorMethodValid); else CLRBIT(fValidFlags[ col ],kFFactorMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE PIN Diode method available from colour "col" // void MCalibrationQEPix::SetPINDiodeMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kPINDiodeMethodValid); else CLRBIT(fValidFlags[ col ],kPINDiodeMethodValid); } // ------------------------------------------------------------------------------ // // Update the Blind Pixel Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateBlindPixelMethod() { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAverageBlindPixelQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormBlindPixel = weightedav / sumweights; fAvNormBlindPixelVar = 1./ sumweights ; SetAverageQEBlindPixelAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the Combination of the three Methods: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateCombinedMethod() { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAverageCombinedQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAverageCombinedQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAverageCombinedQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAverageCombinedQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormCombined = weightedav / sumweights; fAvNormCombinedVar = 1./ sumweights ; SetAverageQECombinedAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the F-Factor Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateFFactorMethod() { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAverageFFactorQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormFFactor = weightedav / sumweights; fAvNormFFactorVar = 1./ sumweights ; SetAverageQEFFactorAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the PIN Diode Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdatePINDiodeMethod() { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAveragePINDiodeQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormPINDiode = weightedav / sumweights; fAvNormPINDiodeVar = 1./ sumweights ; SetAverageQEPINDiodeAvailable(); return kTRUE; }