/* ======================================================================== *\ ! ! * ! * This file is part of MARS, the MAGIC Analysis and Reconstruction ! * Software. It is distributed to you in the hope that it can be a useful ! * and timesaving tool in analysing Data of imaging Cerenkov telescopes. ! * It is distributed WITHOUT ANY WARRANTY. ! * ! * Permission to use, copy, modify and distribute this software and its ! * documentation for any purpose is hereby granted without fee, ! * provided that the above copyright notice appear in all copies and ! * that both that copyright notice and this permission notice appear ! * in supporting documentation. It is provided "as is" without express ! * or implied warranty. ! * ! ! ! Author(s): Markus Gaug 02/2004 ! ! Copyright: MAGIC Software Development, 2000-2004 ! ! \* ======================================================================== */ ///////////////////////////////////////////////////////////////////////////// // // MCalibrationQEPix // // Storage container of the calibrated Quantrum Efficiency of one pixel. // This container (like MCalibrationQECam) is designed to persist during // several eventloops over different calibration files, especially those // with different colour LEDs. This class contains all measured Quantum // Efficiencies with the calibration system for each individual pixel. // // At the moment, this calibration works in the following steps: // // 1) MHCalibrationChargeCam extracts mean and sigma (and its errors) of // the summed FADC slices distribution and stores them in MCalibrationCam // // 2) MHCalibrationChargeBlindPix extracts the mean of a Poisson fit to the // single photo-electron spectrum and stores it in MCalibrationChargeBlindPix // // 3) MHCalibrationChargePINDiode extracts the mean of a charge distribution // of the signals collected by the PIN Diode and stores it in // MCalibrationChargePINDiode // // 4) MCalibrationChargeCalc calculates for every pixel the number of // photo-electrons with the F-Factor method and stores them in MCalibrationChargePix // // 5) MCalibrationChargeCalc calculates the (weighted) average number of photo- // electrons from the pixels with the area index 0 (Inner pixels for the MAGIC // camera) and divides this number by gkDefaultQEGreen, gkDefaultQEBlue, // gkDefaultQEUV or gkDefaultQECT1, depending on the used pulser LED colour, // and further by MCalibrationQECam::gkPlexiglassQE. The obtained number is then // divided further by MGeomCam::GetPixRatio(pixel idx) (1. for inner pixels) and // gives the NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS // of the camera, obtained with the F-Factor method. (In the case of the MAGIC camera, // this number is thus BY CONSTRUCTION four times bigger for the outer pixels than for // the inner ones.) // // 6) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera // from the MCalibrationChargeBlindPix and multiplies it with the light guides area // of each pixel (MGeomPix::GetA()) and divides it by the quantum efficiency of the // plexi-glass (MCalibrationQECam::gkPlexiglassQE). The obtained number gives the // NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS of the camera, // obtained with the Blind Pixel method. // // 7) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera // from the MCalibrationChargePINDiode and multiplies it with the light guides area // of each pixel (MGeomPix::GetA()). The obtained number gives the NUMBER OF PHOTONS // incident on every pixels light guid OUTSIDE THE PLEXIGLASS of the camera, // obtained with the PIN Diode method. // // 8) Each of the three photons numbers is divided by the mean sum of FADC counts // and defined as MEASURED QUANTUM EFFICIENCY AT A GIVEN COLOUR. They are stored // in the variables SetQEBlindPixel(qe, color), SetQEFFactor(qe,color) and // SetQEPINDiode(qe,color) // // 9) Errors are propagated and corresponding variances get stored in // SetQEBlindPixelVar(var,color), SetQEFFactorVar(var,color) and // SetQEPINDiodeVar(var,color). // // 10) After every eventloop, MCalibrationChargeCalc calls the functions UpdateBlindPixelMethod(), // UpdateFFactorMethod() and UpdatePINDiodeMethod() which calculate the ratio // measured QE / gkDefaultQEGreen (or gkDefaultQEBlue or gkDefaultQEUV or gkDefaultQECT1) // and calculates an weighted average of these quantum-efficiency normalizations obtained // by one of the three methods. // // 11) A call to GetQECascadesBlindPixel(), GetQECascadesFFactor() or // GetQECascadesPINDiode() returns then the normalization multiplied with an average QE // folded into a cascades spectrum. This number should be dependent on zenith angle, but // this feature is not yet implemented, instead a fixed number gkDefaultAverageQE is used. // // The number gkDefaultAverageQE = 0.18 +- 0.02 can be obtained in the following way: // // * Transmission probability Plexiglass: 0.92 // // * Averaged QE coated PMTs: zenith value // 0. 0.237 // 20. 0.237 // 40. 0.236 // 60. 0.234 // (from D.Paneque et al., NIM A 504, 2003, 109-115, see following figure with the // photon spectra at 2200 m altitude:) // //Begin_Html /* */ //End_Html // // * PMT photoelectron collection efficiency: 0.9 // (from D.Paneque, email 14.2.2004) // // * Light guides efficiency: 0.94 // (from D.Paneque, email 14.2.2004) // // "Concerning the light guides effiency estimation... Daniel Ferenc // is preparing some work (simulations) to estimate it. Yet so far, he has // been busy with other stuff, and this work is still Unfinished. // // The estimation I did comes from: // 1) Reflectivity of light guide walls is 85 % (aluminum) // 2) At ZERO degree light incidence, 37% of the light hits such walls // (0.15X37%= 5.6% of light lost) // 3) When increasing the light incidence angle, more and more light hits // the walls. // // However, the loses due to larger amount of photons hitting the walls is more // or less counteracted by the fact that more and more photon trajectories cross // the PMT photocathode twice, increasing the effective sensitivity of the PMT. // //Begin_Html /* */ //End_Html // // The plot shows the normalized spectrum of photo-electrons preceding from // a typical spectrum of Cherenkov photons produced by an atmospheric shower. The // green line is for observation zenith angles of 20 deg. and the red line for // 60 deg. The overall effective QE drops from about 20.8 to about 19.8. // // Jurgen Gebauer did some quick measurements about this issue. I attach a // plot. You can see that the angular dependence is (more or less) in agreement with a // CosTheta function (below 20-25 degrees), which is the variation of the entrance // window cross section. So, in first approximation, no losses when increasing light // incidence angle; and therefore, the factor 0.94. // //Begin_Html /* */ //End_Html // // The Quantum efficiencies for individual colours have been taken from: // D. Paneque et al., A Method to enhance the sensitivity of photomultipliers // of air Cherenkov Telescopes, NIM A 504, 2003, 109-115 // (see following figure) // //Begin_Html /* */ //End_Html // // The Transmission of the Plexiglass window has been provided by Eckart and is // displayed in the next plot. The above red curve has to be taken since it corresponds // to the glass type set on the camera. // //Begin_Html /* */ //End_Html // // See also: MJCalibration, MCalibrationChargeCalc, // MCalibrationChargeCam, MCalibrationChargePix, // MHCalibrationChargeCam, MHCalibrationChargePix, // MHCalibrationChargePINDiode, MHCalibrationChargeBlindPix // ///////////////////////////////////////////////////////////////////////////// #include "MCalibrationQEPix.h" #include #include "MLog.h" #include "MLogManip.h" ClassImp(MCalibrationQEPix); using namespace std; const Float_t MCalibrationQEPix::gkDefaultQEGreen = 0.192; const Float_t MCalibrationQEPix::gkDefaultQEBlue = 0.27; const Float_t MCalibrationQEPix::gkDefaultQEUV = 0.285; const Float_t MCalibrationQEPix::gkDefaultQECT1 = 0.285; const Float_t MCalibrationQEPix::gkDefaultQEGreenErr = 0.007; const Float_t MCalibrationQEPix::gkDefaultQEBlueErr = 0.01 ; const Float_t MCalibrationQEPix::gkDefaultQEUVErr = 0.012; const Float_t MCalibrationQEPix::gkDefaultQECT1Err = 0.012; const Float_t MCalibrationQEPix::gkDefaultAverageQE = 0.184; const Float_t MCalibrationQEPix::gkDefaultAverageQEErr = 0.02 ; const Float_t MCalibrationQEPix::gkPMTCollectionEff = 0.90 ; const Float_t MCalibrationQEPix::gkPMTCollectionEffErr = 0.05 ; const Float_t MCalibrationQEPix::gkLightGuidesEffGreen = 0.94 ; const Float_t MCalibrationQEPix::gkLightGuidesEffGreenErr = 0.03 ; const Float_t MCalibrationQEPix::gkLightGuidesEffBlue = 0.94 ; const Float_t MCalibrationQEPix::gkLightGuidesEffBlueErr = 0.03 ; const Float_t MCalibrationQEPix::gkLightGuidesEffUV = 0.94 ; const Float_t MCalibrationQEPix::gkLightGuidesEffUVErr = 0.03 ; const Float_t MCalibrationQEPix::gkLightGuidesEffCT1 = 0.94 ; const Float_t MCalibrationQEPix::gkLightGuidesEffCT1Err = 0.03 ; // -------------------------------------------------------------------------- // // Default Constructor: // // Initializes all TArrays to MCalibrationCam::gkNumPulserColors // // Calls: // - Clear() // MCalibrationQEPix::MCalibrationQEPix(const char *name, const char *title) : fAverageQE ( gkDefaultAverageQE ) { fName = name ? name : "MCalibrationQEPix"; fTitle = title ? title : "Container of the calibrated quantum efficiency "; fQEBlindPixel .Set( MCalibrationCam::gkNumPulserColors ); fQEBlindPixelVar .Set( MCalibrationCam::gkNumPulserColors ); fQECombined .Set( MCalibrationCam::gkNumPulserColors ); fQECombinedVar .Set( MCalibrationCam::gkNumPulserColors ); fQEFFactor .Set( MCalibrationCam::gkNumPulserColors ); fQEFFactorVar .Set( MCalibrationCam::gkNumPulserColors ); fQEPINDiode .Set( MCalibrationCam::gkNumPulserColors ); fQEPINDiodeVar .Set( MCalibrationCam::gkNumPulserColors ); fValidFlags .Set( MCalibrationCam::gkNumPulserColors ); Clear(); } // ----------------------------------------------------- // // copy 'constructor' // void MCalibrationQEPix::Copy(TObject& object) const { MCalibrationQEPix &pix = (MCalibrationQEPix&)object; MCalibrationPix::Copy(pix); // // Copy the rest of the data members // pix.fQEBlindPixel = fQEBlindPixel; pix.fQEBlindPixelVar = fQEBlindPixelVar; pix.fQECombined = fQECombined; pix.fQECombinedVar = fQECombinedVar; pix.fQEFFactor = fQEFFactor; pix.fQEFFactorVar = fQEFFactorVar; pix.fQEPINDiode = fQEPINDiode; pix.fQEPINDiodeVar = fQEPINDiodeVar; pix.fAvNormBlindPixel = fAvNormBlindPixel; pix.fAvNormBlindPixelVar = fAvNormBlindPixelVar; pix.fAvNormCombined = fAvNormCombined; pix.fAvNormCombinedVar = fAvNormCombinedVar; pix.fAvNormFFactor = fAvNormFFactor; pix.fAvNormFFactorVar = fAvNormFFactorVar; pix.fAvNormPINDiode = fAvNormPINDiode; pix.fAvNormPINDiodeVar = fAvNormPINDiodeVar; pix.fAverageQE = fAverageQE; pix.fValidFlags = fValidFlags; pix.fAvailableFlags = fAvailableFlags; } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the blind pixel method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAverageBlindPixelQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsBlindPixelMethodValid (col)) { const Float_t newavqe = GetQEBlindPixel (col) / GetDefaultQE (col) / GetLightGuidesEff (col) / GetPMTCollectionEff(); const Float_t newavqevar = ( GetQEBlindPixelRelVar(col) + GetDefaultQERelVar(col) + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe * weight; sumw += weight; } } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the F-Factor method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAverageFFactorQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsFFactorMethodValid (col)) { const Float_t newavqe = GetQEFFactor(col) / GetDefaultQE (col) / GetLightGuidesEff (col) / GetPMTCollectionEff(); const Float_t newavqevar = ( GetQEFFactorRelVar(col) + GetDefaultQERelVar(col) + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe *weight; sumw += weight; } } // ---------------------------------------------------------------------------------------------- // // Search all available QE's of a certain colour after the PIN Diode method, // compare them to the default QE of that colour and // add up a weighted average (wav) and a sum of weights (sumw) // // FIXME: This has to be replaced by a decent fit the QE-spectrum! // void MCalibrationQEPix::AddAveragePINDiodeQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw ) { if (IsPINDiodeMethodValid (col)) { const Float_t newavqe = GetQEPINDiode(col) / GetDefaultQE (col) / GetLightGuidesEff (col) / GetPMTCollectionEff(); const Float_t newavqevar = ( GetQEPINDiodeRelVar(col) + GetDefaultQERelVar(col) + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() ) * newavqe * newavqe; const Float_t weight = 1./newavqevar; wav += newavqe *weight; sumw += weight; } } // ------------------------------------------------------------------------ // // Sets all quantum efficiencies to the gkDefaultQE* // Sets all Variances to the square root of gkDefaultQE*Err // Sets all flags to kFALSE // Sets all fAvNorm-Variables to 1.; // Sets all fAvNorm-Variances to 0.; // // Calls: // - MCalibrationPix::Clear() // void MCalibrationQEPix::Clear(Option_t *o) { SetAverageQEBlindPixelAvailable ( kFALSE ); SetAverageQEFFactorAvailable ( kFALSE ); SetAverageQECombinedAvailable ( kFALSE ); SetAverageQEPINDiodeAvailable ( kFALSE ); fQEBlindPixel [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEBlindPixelVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQEFFactor [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEFFactorVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQECombined [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQECombinedVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; fQEPINDiode [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen; fQEPINDiodeVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kGREEN); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kGREEN); fQEBlindPixel [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEBlindPixelVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQEFFactor [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEFFactorVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQECombined [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQECombinedVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; fQEPINDiode [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue; fQEPINDiodeVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kBLUE); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kBLUE); fQEBlindPixel [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEBlindPixelVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQEFFactor [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEFFactorVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQECombined [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQECombinedVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; fQEPINDiode [ MCalibrationCam::kUV ] = gkDefaultQEUV; fQEPINDiodeVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kUV); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kUV); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kUV); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kUV); fQEBlindPixel [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEBlindPixelVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQEFFactor [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEFFactorVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQECombined [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQECombinedVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; fQEPINDiode [ MCalibrationCam::kCT1 ] = gkDefaultQECT1; fQEPINDiodeVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err; SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kCT1); SetFFactorMethodValid ( kFALSE, MCalibrationCam::kCT1); SetCombinedMethodValid ( kFALSE, MCalibrationCam::kCT1); SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kCT1); fAvNormBlindPixel = -1.; fAvNormBlindPixelVar = 0.; fAvNormCombined = -1.; fAvNormCombinedVar = 0.; fAvNormFFactor = -1.; fAvNormFFactorVar = 0.; fAvNormPINDiode = -1.; fAvNormPINDiodeVar = 0.; MCalibrationPix::Clear(); } // ----------------------------------------------------------------- // // Return the average Default QE // const Float_t MCalibrationQEPix::GetAverageQE() const { return fAverageQE; } // ----------------------------------------------------------------- // // Return the relative variance of the average Default QE // const Float_t MCalibrationQEPix::GetAverageQERelVar() const { return gkDefaultAverageQEErr * gkDefaultAverageQEErr / (gkDefaultAverageQE * gkDefaultAverageQE ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (Blind Pixel Method) // const Float_t MCalibrationQEPix::GetAvNormBlindPixelRelVar( ) const { return fAvNormBlindPixelVar / (fAvNormBlindPixel * fAvNormBlindPixel ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (Combined Method) // const Float_t MCalibrationQEPix::GetAvNormCombinedRelVar( ) const { return fAvNormCombinedVar / (fAvNormCombined * fAvNormCombined ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (F-Factor Method) // const Float_t MCalibrationQEPix::GetAvNormFFactorRelVar( ) const { return fAvNormFFactorVar / (fAvNormFFactor * fAvNormFFactor ); } // ----------------------------------------------------------------- // // Return the relative variance of the average normalization (PIN Diode Method) // const Float_t MCalibrationQEPix::GetAvNormPINDiodeRelVar( ) const { return fAvNormPINDiodeVar / (fAvNormPINDiode * fAvNormPINDiode ); } // ------------------------------------------------------------------------------ // // Get the default Quantum efficiency for pulser colour "col" // Float_t MCalibrationQEPix::GetDefaultQE( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkDefaultQEGreen; break; case MCalibrationCam::kBLUE: return gkDefaultQEBlue; break; case MCalibrationCam::kUV: return gkDefaultQEUV; break; case MCalibrationCam::kCT1: return gkDefaultQECT1; break; default: return gkDefaultQECT1; break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the relative variance of the default Quantum efficiency for pulser colour "col" // Float_t MCalibrationQEPix::GetDefaultQERelVar( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkDefaultQEGreenErr * gkDefaultQEGreenErr / (gkDefaultQEGreen * gkDefaultQEGreen ); break; case MCalibrationCam::kBLUE: return gkDefaultQEBlueErr * gkDefaultQEBlueErr / (gkDefaultQEBlue * gkDefaultQEBlue ); break; case MCalibrationCam::kUV: return gkDefaultQEUVErr * gkDefaultQEUVErr / (gkDefaultQEUV * gkDefaultQEUV ); break; case MCalibrationCam::kCT1: return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 ); break; default: return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 ); break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the light guides efficiency depending on the pulser colour "col" // FIXME: Lacking detailed measurement, these number are not yet available // for the individual colours and therefore, only one same number is // returned, namely gkLightGuidesEff // Float_t MCalibrationQEPix::GetLightGuidesEff( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkLightGuidesEffGreen; break; case MCalibrationCam::kBLUE: return gkLightGuidesEffBlue; break; case MCalibrationCam::kUV: return gkLightGuidesEffUV; break; case MCalibrationCam::kCT1: return gkLightGuidesEffCT1; break; default: return gkLightGuidesEffCT1; break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the relative variance of the light guides efficiency depending on the // pulser colour "col" // FIXME: Lacking detailed measurement, these number are not yet available // for the individual colours and therefore, only one same number is // returned, namely gkLightGuidesEffErr^2 / gkLightGuidesEff^2 // Float_t MCalibrationQEPix::GetLightGuidesEffRelVar( const MCalibrationCam::PulserColor_t col ) const { switch (col) { case MCalibrationCam::kGREEN: return gkLightGuidesEffGreenErr * gkLightGuidesEffGreenErr / gkLightGuidesEffGreen / gkLightGuidesEffGreen; break; case MCalibrationCam::kBLUE: return gkLightGuidesEffBlueErr * gkLightGuidesEffBlueErr / gkLightGuidesEffBlue / gkLightGuidesEffBlue; break; case MCalibrationCam::kUV: return gkLightGuidesEffUVErr * gkLightGuidesEffUVErr / gkLightGuidesEffUV / gkLightGuidesEffUV; break; case MCalibrationCam::kCT1: return gkLightGuidesEffCT1Err * gkLightGuidesEffCT1Err / gkLightGuidesEffCT1 / gkLightGuidesEffCT1; break; default: return gkLightGuidesEffCT1Err * gkLightGuidesEffCT1Err / gkLightGuidesEffCT1 / gkLightGuidesEffCT1; break; } return -1.; } // ------------------------------------------------------------------------------ // // Get the light guides efficiency for Cherenkov spectra. // FIXME: Lacking detailed measurement, these number are not yet available // for the individual colours and therefore, only one same number is // returned, namely gkLightGuidesEffBlue // Float_t MCalibrationQEPix::GetLightGuidesEff() const { return gkLightGuidesEffBlue; } // ------------------------------------------------------------------------------ // // Get the relative variance of the light guides efficiency for Cherenkov spectra. // FIXME: Lacking detailed measurement, these number are not yet available // for the individual colours and therefore, only one same number is // returned, namely gkLightGuidesEffBlueErr^2 / gkLightGuidesBlueEff^2 // Float_t MCalibrationQEPix::GetLightGuidesEffRelVar() const { return gkLightGuidesEffBlueErr * gkLightGuidesEffBlueErr / gkLightGuidesEffBlue / gkLightGuidesEffBlue; } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEBlindPixel( const MCalibrationCam::PulserColor_t col ) const { return fQEBlindPixel[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEBlindPixelErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEBlindPixelVar[col] < 0.) return -1.; return TMath::Sqrt(fQEBlindPixelVar[col]); } // ------------------------------------------------------------------------------ // // Get the relative variance of the calculated Quantum efficiency with the blind pixel method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEBlindPixelRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEBlindPixelVar[col] < 0.) return -1.; if (fQEBlindPixel[col] < 0.) return -1.; return fQEBlindPixelVar[col] / ( fQEBlindPixel[col] * fQEBlindPixel[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the combination of the three methods // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQECombined( const MCalibrationCam::PulserColor_t col ) const { return fQECombined[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the combination of the three methods // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQECombinedErr( const MCalibrationCam::PulserColor_t col ) const { if (fQECombinedVar[col] < 0.) return -1.; return TMath::Sqrt(fQECombinedVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the combination of // the three methods, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQECombinedRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQECombinedVar[col] < 0.) return -1.; if (fQECombined[col] < 0.) return -1.; return fQECombinedVar[col] / ( fQECombined[col] * fQECombined[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the F-Factor method // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEFFactor( const MCalibrationCam::PulserColor_t col ) const { return fQEFFactor[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the F-Factor method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEFFactorErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEFFactorVar[col] < 0.) return -1.; return TMath::Sqrt(fQEFFactorVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the F-Factor method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEFFactorRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEFFactorVar[col] < 0.) return -1.; if (fQEFFactor[col] < 0.) return -1.; return fQEFFactorVar[col] / ( fQEFFactor[col] * fQEFFactor[col] ); } // ------------------------------------------------------------------------------ // // Get the calculated Quantum efficiency with the PIN-Diode method // obtained with pulser colour "col" // Float_t MCalibrationQEPix::GetQEPINDiode( const MCalibrationCam::PulserColor_t col ) const { return fQEPINDiode[col]; } // ------------------------------------------------------------------------------ // // Get the error on the calculated Quantum efficiency with the PIN Diode method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Float_t MCalibrationQEPix::GetQEPINDiodeErr( const MCalibrationCam::PulserColor_t col ) const { if (fQEPINDiodeVar[col] < 0.) return -1.; return TMath::Sqrt(fQEPINDiodeVar[col]); } // ---------------------------------------------------------------------------------------- // // Get the relative variance of the calculated Quantum efficiency with the PIN Diode method, // obtained with pulser colour "col" // Tests for variances smaller than 0. (e.g. if it has not yet been set) // and returns -1. in that case // Tests for quantum efficiency equal to 0. and returns -1. in that case // Float_t MCalibrationQEPix::GetQEPINDiodeRelVar( const MCalibrationCam::PulserColor_t col ) const { if (fQEPINDiodeVar[col] < 0.) return -1.; if (fQEPINDiode[col] < 0.) return -1.; return fQEPINDiodeVar[col] / ( fQEPINDiode[col] * fQEPINDiode[col] ); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the blind pixel method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixel() const { return fAvNormBlindPixel * GetAverageQE(); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the blind pixel method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixelVar() const { return ( GetAvNormBlindPixelRelVar() + GetAverageQERelVar()) * GetQECascadesBlindPixel() * GetQECascadesBlindPixel(); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the blind pixel method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesBlindPixelErr() const { const Float_t var = GetQECascadesBlindPixelVar(); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the combination of the three methods and averaged over the results // from the different colours. // Float_t MCalibrationQEPix::GetQECascadesCombined() const { return fAvNormCombined * GetAverageQE(); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the combined method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesCombinedErr() const { const Float_t var = GetQECascadesCombinedVar(); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the combination of the three methods and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesCombinedVar() const { return ( GetAvNormCombinedRelVar() + GetAverageQERelVar()) * GetQECascadesCombined() * GetQECascadesCombined(); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the F-Factor method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactor() const { return fAvNormFFactor * GetAverageQE(); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the F-Factor method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactorErr() const { const Float_t var = GetQECascadesFFactorVar(); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the F-Factor method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesFFactorVar() const { return ( GetAvNormFFactorRelVar() + GetAverageQERelVar()) * GetQECascadesFFactor() * GetQECascadesFFactor(); } // ------------------------------------------------------------------------------ // // Get the averaged Quantum efficiency folded over the cascade spectrum, obtained // with the PIN Diode method and averaged over the results from the different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiode() const { return fAvNormPINDiode * GetAverageQE(); } // ------------------------------------------------------------------------------ // // Get the error on the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the PIN Diode method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiodeErr() const { const Float_t var = GetQECascadesPINDiodeVar(); if (var < 0.) return -1.; return TMath::Sqrt(var); } // ------------------------------------------------------------------------------ // // Get the variance of the averaged Quantum efficiency folded over the cascade spectrum, // obtained with the PIN Diode method and averaged over the results from the // different colours. // Float_t MCalibrationQEPix::GetQECascadesPINDiodeVar() const { return ( GetAvNormPINDiodeRelVar() + GetAverageQERelVar()) * GetQECascadesPINDiode() * GetQECascadesPINDiode(); } // ----------------------------------------------------------------- // // Return the overall collection efficiency of the PMT // Float_t MCalibrationQEPix::GetPMTCollectionEff() const { return gkPMTCollectionEff; } // ----------------------------------------------------------------- // // Return the relative variance of the collection efficiency of the PMT // Float_t MCalibrationQEPix::GetPMTCollectionEffRelVar() const { return gkPMTCollectionEffErr * gkPMTCollectionEffErr / gkPMTCollectionEff / gkPMTCollectionEff; } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the blind pixel method // Bool_t MCalibrationQEPix::IsAverageQEBlindPixelAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the combination of the three methods // Bool_t MCalibrationQEPix::IsAverageQECombinedAvailable() const { return TESTBIT(fAvailableFlags,kAverageQECombinedAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the F-Factor method // Bool_t MCalibrationQEPix::IsAverageQEFFactorAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEFFactorAvailable); } // ------------------------------------------------------------------------------ // // Test if the average QE can be obtained from the PIN Diode method // Bool_t MCalibrationQEPix::IsAverageQEPINDiodeAvailable() const { return TESTBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the blind pixel method // Bool_t MCalibrationQEPix::IsBlindPixelMethodValid () const { if (IsBlindPixelMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsBlindPixelMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the combination // of the three methods // Bool_t MCalibrationQEPix::IsCombinedMethodValid () const { if (IsCombinedMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsCombinedMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the F-Factor method // Bool_t MCalibrationQEPix::IsFFactorMethodValid () const { if (IsFFactorMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsFFactorMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if any of the three colours has already been calibrated with the PIN Diode method // Bool_t MCalibrationQEPix::IsPINDiodeMethodValid () const { if (IsPINDiodeMethodValid (MCalibrationCam::kGREEN)) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kBLUE )) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kUV )) return kTRUE; if (IsPINDiodeMethodValid (MCalibrationCam::kCT1 )) return kTRUE; return kFALSE; } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the Blind Pixel method // Bool_t MCalibrationQEPix::IsBlindPixelMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kBlindPixelMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the combination of // the three methods // Bool_t MCalibrationQEPix::IsCombinedMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kCombinedMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the F-Factor method // Bool_t MCalibrationQEPix::IsFFactorMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kFFactorMethodValid); } // ------------------------------------------------------------------------------ // // Test if the colour "col" has already been calibrated with the PIN Diode method // Bool_t MCalibrationQEPix::IsPINDiodeMethodValid (MCalibrationCam::PulserColor_t col) const { return TESTBIT(fValidFlags[ col ],kPINDiodeMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit Average QE Blind Pixel method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEBlindPixelAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); else CLRBIT(fAvailableFlags,kAverageQEBlindPixelAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE combination of three methods available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQECombinedAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQECombinedAvailable); else CLRBIT(fAvailableFlags,kAverageQECombinedAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE F-Factor method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEFFactorAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEFFactorAvailable); else CLRBIT(fAvailableFlags,kAverageQEFFactorAvailable); } // ------------------------------------------------------------------------------ // // Set the bit Average QE PIN Diode method available from outside (only for MC!) // void MCalibrationQEPix::SetAverageQEPINDiodeAvailable ( Bool_t b ) { if (b) SETBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); else CLRBIT(fAvailableFlags,kAverageQEPINDiodeAvailable); } // ------------------------------------------------------------------------------ // // Set the bit QE Blind Pixel method available from colour "col" // void MCalibrationQEPix::SetBlindPixelMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kBlindPixelMethodValid); else CLRBIT(fValidFlags[ col ],kBlindPixelMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE Combination of three methods available from colour "col" // void MCalibrationQEPix::SetCombinedMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kCombinedMethodValid); else CLRBIT(fValidFlags[ col ],kCombinedMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE F-Factor method available from colour "col" // void MCalibrationQEPix::SetFFactorMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kFFactorMethodValid); else CLRBIT(fValidFlags[ col ],kFFactorMethodValid); } // ------------------------------------------------------------------------------ // // Set the bit QE PIN Diode method available from colour "col" // void MCalibrationQEPix::SetPINDiodeMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col ) { if (b) SETBIT(fValidFlags[ col ],kPINDiodeMethodValid); else CLRBIT(fValidFlags[ col ],kPINDiodeMethodValid); } // ------------------------------------------------------------------------------ // // Update the Blind Pixel Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateBlindPixelMethod( const Float_t plex ) { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAverageBlindPixelQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAverageBlindPixelQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormBlindPixel = weightedav / plex / sumweights; fAvNormBlindPixelVar = 1./ sumweights; SetAverageQEBlindPixelAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the Combination of the three Methods: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateCombinedMethod() { fAvNormCombinedVar = 0.; fAvNormCombined = 0.; if (fAvNormBlindPixel > 0. && fAvNormBlindPixelVar > 0.) { const Float_t weight = 1./fAvNormBlindPixelVar; fAvNormCombinedVar += weight; fAvNormCombined += fAvNormBlindPixel*weight; } if (fAvNormFFactor > 0. && fAvNormFFactorVar > 0. ) { const Float_t weight = 1./fAvNormFFactorVar; fAvNormCombinedVar += weight; fAvNormCombined += fAvNormFFactor*weight; } if (fAvNormPINDiode > 0. && fAvNormPINDiodeVar > 0. ) { const Float_t weight = 1./fAvNormPINDiodeVar; fAvNormCombinedVar += weight; fAvNormCombined += fAvNormPINDiode*weight; } fAvNormCombined = ( fAvNormCombinedVar > 0.) ? -1. : fAvNormCombined/fAvNormCombinedVar ; if (fAvNormCombined > 0.) SetAverageQECombinedAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the F-Factor Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdateFFactorMethod( const Float_t plex ) { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAverageFFactorQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAverageFFactorQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormFFactor = weightedav / plex / sumweights; fAvNormFFactorVar = 1./ sumweights; SetAverageQEFFactorAvailable(); return kTRUE; } // ------------------------------------------------------------------------------ // // Update the PIN Diode Method: Calculate new average QE's // Bool_t MCalibrationQEPix::UpdatePINDiodeMethod() { Float_t weightedav = 0.; Float_t sumweights = 0.; AddAveragePINDiodeQEs(MCalibrationCam::kGREEN, weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kBLUE , weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kUV , weightedav, sumweights); AddAveragePINDiodeQEs(MCalibrationCam::kCT1 , weightedav, sumweights); if (weightedav == 0. || sumweights == 0.) return kFALSE; fAvNormPINDiode = weightedav / sumweights; fAvNormPINDiodeVar = 1./ sumweights ; SetAverageQEPINDiodeAvailable(); return kTRUE; }