source: trunk/MagicSoft/Mars/mcalib/MCalibrationQEPix.cc@ 4775

Last change on this file since 4775 was 4251, checked in by gaug, 21 years ago
*** empty log message ***
File size: 48.7 KB
Line 
1/* ======================================================================== *\
2!
3! *
4! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5! * Software. It is distributed to you in the hope that it can be a useful
6! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7! * It is distributed WITHOUT ANY WARRANTY.
8! *
9! * Permission to use, copy, modify and distribute this software and its
10! * documentation for any purpose is hereby granted without fee,
11! * provided that the above copyright notice appear in all copies and
12! * that both that copyright notice and this permission notice appear
13! * in supporting documentation. It is provided "as is" without express
14! * or implied warranty.
15! *
16!
17!
18! Author(s): Markus Gaug 02/2004 <mailto:markus@ifae.es>
19!
20! Copyright: MAGIC Software Development, 2000-2004
21!
22!
23\* ======================================================================== */
24
25/////////////////////////////////////////////////////////////////////////////
26//
27// MCalibrationQEPix
28//
29// Storage container of the calibrated Quantrum Efficiency of one pixel.
30// This container (like MCalibrationQECam) is designed to persist during
31// several eventloops over different calibration files, especially those
32// with different colour LEDs. This class contains all measured Quantum
33// Efficiencies with the calibration system for each individual pixel.
34//
35// At the moment, this calibration works in the following steps:
36//
37// 1) MHCalibrationChargeCam extracts mean and sigma (and its errors) of
38// the summed FADC slices distribution and stores them in MCalibrationCam
39//
40// 2) MHCalibrationChargeBlindPix extracts the mean of a Poisson fit to the
41// single photo-electron spectrum and stores it in MCalibrationChargeBlindPix
42//
43// 3) MHCalibrationChargePINDiode extracts the mean of a charge distribution
44// of the signals collected by the PIN Diode and stores it in
45// MCalibrationChargePINDiode
46//
47// 4) MCalibrationChargeCalc calculates for every pixel the number of
48// photo-electrons with the F-Factor method and stores them in MCalibrationChargePix
49//
50// 5) MCalibrationChargeCalc calculates the (weighted) average number of photo-
51// electrons from the pixels with the area index 0 (Inner pixels for the MAGIC
52// camera) and divides this number by gkDefaultQEGreen, gkDefaultQEBlue,
53// gkDefaultQEUV or gkDefaultQECT1, depending on the used pulser LED colour,
54// and further by MCalibrationQECam::gkPlexiglassQE. The obtained number is then
55// divided further by MGeomCam::GetPixRatio(pixel idx) (1. for inner pixels) and
56// gives the NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS
57// of the camera, obtained with the F-Factor method. (In the case of the MAGIC camera,
58// this number is thus BY CONSTRUCTION four times bigger for the outer pixels than for
59// the inner ones.)
60//
61// 6) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera
62// from the MCalibrationChargeBlindPix and multiplies it with the light guides area
63// of each pixel (MGeomPix::GetA()) and divides it by the quantum efficiency of the
64// plexi-glass (MCalibrationQECam::gkPlexiglassQE). The obtained number gives the
65// NUMBER OF PHOTONS incident on every pixel light guide OUTSIDE THE PLEXIGLASS of the camera,
66// obtained with the Blind Pixel method.
67//
68// 7) MCalibrationChargeCalc calculates the mean photon flux per mm^2 in the camera
69// from the MCalibrationChargePINDiode and multiplies it with the light guides area
70// of each pixel (MGeomPix::GetA()). The obtained number gives the NUMBER OF PHOTONS
71// incident on every pixels light guid OUTSIDE THE PLEXIGLASS of the camera,
72// obtained with the PIN Diode method.
73//
74// 8) Each of the three photons numbers is divided by the mean sum of FADC counts
75// and defined as MEASURED QUANTUM EFFICIENCY AT A GIVEN COLOUR. They are stored
76// in the variables SetQEBlindPixel(qe, color), SetQEFFactor(qe,color) and
77// SetQEPINDiode(qe,color)
78//
79// 9) Errors are propagated and corresponding variances get stored in
80// SetQEBlindPixelVar(var,color), SetQEFFactorVar(var,color) and
81// SetQEPINDiodeVar(var,color).
82//
83// 10) After every eventloop, MCalibrationChargeCalc calls the functions UpdateBlindPixelMethod(),
84// UpdateFFactorMethod() and UpdatePINDiodeMethod() which calculate the ratio
85// measured QE / gkDefaultQEGreen (or gkDefaultQEBlue or gkDefaultQEUV or gkDefaultQECT1)
86// and calculates an weighted average of these quantum-efficiency normalizations obtained
87// by one of the three methods.
88//
89// 11) A call to GetQECascadesBlindPixel(zenith), GetQECascadesFFactor(zenith) or
90// GetQECascadesPINDiode(zenith) returns then the normalization multiplied with an average QE
91// folded into a cascades spectrum. This number should be dependent on zenith angle, but
92// this feature is not yet implemented, instead a fixed number gkDefaultAverageQE is used.
93//
94// The number gkDefaultAverageQE = 0.18 +- 0.02 can be obtained in the following way:
95//
96// * Transmission probability Plexiglass: 0.96
97//
98// * Averaged QE coated PMTs: zenith value
99// 0. 0.237
100// 20. 0.237
101// 40. 0.236
102// 60. 0.234
103// (from D.Paneque et al., NIM A 504, 2003, 109-115, see following figure with the
104// photon spectra at 2200 m altitude:)
105//
106//Begin_Html
107/*
108<img src="images/Photon_spectrum.png">
109*/
110//End_Html
111//
112// * PMT photoelectron collection efficiency: 0.9
113// (from D.Paneque, email 14.2.2004)
114//
115// * Light guides efficiency: 0.94
116// (from D.Paneque, email 14.2.2004)
117//
118// "Concerning the light guides effiency estimation... Daniel Ferenc
119// is preparing some work (simulations) to estimate it. Yet so far, he has
120// been busy with other stuff, and this work is still Unfinished.
121//
122// The estimation I did comes from:
123// 1) Reflectivity of light guide walls is 85 % (aluminum)
124// 2) At ZERO degree light incidence, 37% of the light hits such walls
125// (0.15X37%= 5.6% of light lost)
126// 3) When increasing the light incidence angle, more and more light hits
127// the walls.
128//
129// However, the loses due to larger amount of photons hitting the walls is more
130// or less counteracted by the fact that more and more photon trajectories cross
131// the PMT photocathode twice, increasing the effective sensitivity of the PMT.
132//
133//Begin_Html
134/*
135<img src="images/Normalized_Cherenkov_phe_spectrums_20deg_60deg_coatedPMT.png">
136*/
137//End_Html
138//
139// The plot shows the normalized spectrum of photo-electrons preceding from
140// a typical spectrum of Cherenkov photons produced by an atmospheric shower. The
141// green line is for observation zenith angles of 20 deg. and the red line for
142// 60 deg. The overall effective QE drops from about 20.8 to about 19.8.
143//
144// Jurgen Gebauer did some quick measurements about this issue. I attach a
145// plot. You can see that the angular dependence is (more or less) in agreement with a
146// CosTheta function (below 20-25 degrees), which is the variation of the entrance
147// window cross section. So, in first approximation, no losses when increasing light
148// incidence angle; and therefore, the factor 0.94.
149//
150//Begin_Html
151/*
152<img src="images/JuergensMeasurementWithCosThetaCurve.png">
153*/
154//End_Html
155//
156// The Quantum efficiencies for individual colours have been taken from:
157// D. Paneque et al., A Method to enhance the sensitivity of photomultipliers
158// of air Cherenkov Telescopes, NIM A 504, 2003, 109-115
159// (see following figure)
160//
161//Begin_Html
162/*
163<img src="images/QE_Paneque.png">
164*/
165//End_Html
166//
167// The Transmission of the Plexiglass window has been provided by Eckart and is
168// displayed in the next plot. The above red curve has to be taken since it corresponds
169// to the glass type set on the camera.
170//
171//Begin_Html
172/*
173<img src="images/Transmission_Plexiglass.jpg">
174*/
175//End_Html
176//
177// See also: MJCalibration, MCalibrationChargeCalc,
178// MCalibrationChargeCam, MCalibrationChargePix,
179// MHCalibrationChargeCam, MHCalibrationChargePix,
180// MHCalibrationChargePINDiode, MHCalibrationChargeBlindPix
181//
182/////////////////////////////////////////////////////////////////////////////
183#include "MCalibrationQEPix.h"
184#include "MCalibrationCam.h"
185
186#include "MLog.h"
187#include "MLogManip.h"
188
189#include "TArrayF.h"
190#include "TArrayC.h"
191
192ClassImp(MCalibrationQEPix);
193
194using namespace std;
195
196const Float_t MCalibrationQEPix::gkDefaultQEGreen = 0.192;
197const Float_t MCalibrationQEPix::gkDefaultQEBlue = 0.27;
198const Float_t MCalibrationQEPix::gkDefaultQEUV = 0.285;
199const Float_t MCalibrationQEPix::gkDefaultQECT1 = 0.285;
200const Float_t MCalibrationQEPix::gkDefaultQEGreenErr = 0.007;
201const Float_t MCalibrationQEPix::gkDefaultQEBlueErr = 0.01 ;
202const Float_t MCalibrationQEPix::gkDefaultQEUVErr = 0.012;
203const Float_t MCalibrationQEPix::gkDefaultQECT1Err = 0.012;
204const Float_t MCalibrationQEPix::gkDefaultAverageQE = 0.18 ;
205const Float_t MCalibrationQEPix::gkDefaultAverageQEErr = 0.02 ;
206const Float_t MCalibrationQEPix::gkPMTCollectionEff = 0.90 ;
207const Float_t MCalibrationQEPix::gkPMTCollectionEffErr = 0.01 ;
208const Float_t MCalibrationQEPix::gkLightGuidesEffGreen = 0.94 ;
209const Float_t MCalibrationQEPix::gkLightGuidesEffGreenErr = 0.03 ;
210const Float_t MCalibrationQEPix::gkLightGuidesEffBlue = 0.94 ;
211const Float_t MCalibrationQEPix::gkLightGuidesEffBlueErr = 0.03 ;
212const Float_t MCalibrationQEPix::gkLightGuidesEffUV = 0.94 ;
213const Float_t MCalibrationQEPix::gkLightGuidesEffUVErr = 0.03 ;
214const Float_t MCalibrationQEPix::gkLightGuidesEffCT1 = 0.94 ;
215const Float_t MCalibrationQEPix::gkLightGuidesEffCT1Err = 0.03 ;
216// --------------------------------------------------------------------------
217//
218// Default Constructor:
219//
220// Initializes all TArrays to MCalibrationCam::gkNumPulserColors
221//
222// Calls:
223// - Clear()
224//
225MCalibrationQEPix::MCalibrationQEPix(const char *name, const char *title)
226 : fAverageQE ( gkDefaultAverageQE )
227{
228
229 fName = name ? name : "MCalibrationQEPix";
230 fTitle = title ? title : "Container of the calibrated quantum efficiency ";
231
232 fQEBlindPixel .Set( MCalibrationCam::gkNumPulserColors );
233 fQEBlindPixelVar .Set( MCalibrationCam::gkNumPulserColors );
234 fQECombined .Set( MCalibrationCam::gkNumPulserColors );
235 fQECombinedVar .Set( MCalibrationCam::gkNumPulserColors );
236 fQEFFactor .Set( MCalibrationCam::gkNumPulserColors );
237 fQEFFactorVar .Set( MCalibrationCam::gkNumPulserColors );
238 fQEPINDiode .Set( MCalibrationCam::gkNumPulserColors );
239 fQEPINDiodeVar .Set( MCalibrationCam::gkNumPulserColors );
240 fValidFlags .Set( MCalibrationCam::gkNumPulserColors );
241
242 Clear();
243
244}
245
246// ----------------------------------------------------------------------------------------------
247//
248// Search all available QE's of a certain colour after the blind pixel method,
249// compare them to the default QE of that colour and
250// add up a weighted average (wav) and a sum of weights (sumw)
251//
252// FIXME: This has to be replaced by a decent fit the QE-spectrum!
253//
254void MCalibrationQEPix::AddAverageBlindPixelQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw )
255{
256
257 if (IsBlindPixelMethodValid (col))
258 {
259 const Float_t newavqe = GetQEBlindPixel (col) / GetDefaultQE (col)
260 / GetLightGuidesEff (col) / GetPMTCollectionEff();
261 const Float_t newavqevar = ( GetQEBlindPixelRelVar(col) + GetDefaultQERelVar(col)
262 + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() )
263 * newavqe * newavqe;
264 const Float_t weight = 1./newavqevar;
265
266 wav += newavqe * weight;
267 sumw += weight;
268 }
269}
270
271// ----------------------------------------------------------------------------------------------
272//
273// Search all available QE's of a certain colour after the combination of the three methods
274// compare them to the default QE of that colour and
275// add up a weighted average (wav) and a sum of weights (sumw)
276//
277// FIXME: This has to be replaced by a decent fit the QE-spectrum!
278//
279void MCalibrationQEPix::AddAverageCombinedQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw )
280{
281
282 if (IsCombinedMethodValid (col))
283 {
284 const Float_t newavqe = GetQECombined(col) / GetDefaultQE (col)
285 / GetLightGuidesEff (col) / GetPMTCollectionEff();
286 const Float_t newavqevar = ( GetQECombinedRelVar(col) + GetDefaultQERelVar(col)
287 + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() )
288 * newavqe * newavqe;
289 const Float_t weight = 1./newavqevar;
290 wav += newavqe * weight;
291 sumw += weight;
292
293 }
294}
295
296// ----------------------------------------------------------------------------------------------
297//
298// Search all available QE's of a certain colour after the F-Factor method,
299// compare them to the default QE of that colour and
300// add up a weighted average (wav) and a sum of weights (sumw)
301//
302// FIXME: This has to be replaced by a decent fit the QE-spectrum!
303//
304void MCalibrationQEPix::AddAverageFFactorQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw )
305{
306
307 if (IsFFactorMethodValid (col))
308 {
309 const Float_t newavqe = GetQEFFactor(col) / GetDefaultQE (col)
310 / GetLightGuidesEff (col) / GetPMTCollectionEff();
311 const Float_t newavqevar = ( GetQEFFactorRelVar(col) + GetDefaultQERelVar(col)
312 + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() )
313 * newavqe * newavqe;
314 const Float_t weight = 1./newavqevar;
315
316 wav += newavqe *weight;
317 sumw += weight;
318
319 }
320
321
322}
323
324// ----------------------------------------------------------------------------------------------
325//
326// Search all available QE's of a certain colour after the PIN Diode method,
327// compare them to the default QE of that colour and
328// add up a weighted average (wav) and a sum of weights (sumw)
329//
330// FIXME: This has to be replaced by a decent fit the QE-spectrum!
331//
332void MCalibrationQEPix::AddAveragePINDiodeQEs(const MCalibrationCam::PulserColor_t col, Float_t &wav, Float_t &sumw )
333{
334
335 if (IsPINDiodeMethodValid (col))
336 {
337 const Float_t newavqe = GetQEPINDiode(col) / GetDefaultQE (col)
338 / GetLightGuidesEff (col) / GetPMTCollectionEff();
339 const Float_t newavqevar = ( GetQEPINDiodeRelVar(col) + GetDefaultQERelVar(col)
340 + GetLightGuidesEffRelVar(col) + GetPMTCollectionEffRelVar() )
341 * newavqe * newavqe;
342 const Float_t weight = 1./newavqevar;
343 wav += newavqe *weight;
344 sumw += weight;
345 }
346}
347
348
349
350// ------------------------------------------------------------------------
351//
352// Sets all quantum efficiencies to the gkDefaultQE*
353// Sets all Variances to the square root of gkDefaultQE*Err
354// Sets all flags to kFALSE
355// Sets all fAvNorm-Variables to 1.;
356// Sets all fAvNorm-Variances to 0.;
357//
358// Calls:
359// - MCalibrationPix::Clear()
360//
361void MCalibrationQEPix::Clear(Option_t *o)
362{
363
364 SetAverageQEBlindPixelAvailable ( kFALSE );
365 SetAverageQEFFactorAvailable ( kFALSE );
366 SetAverageQECombinedAvailable ( kFALSE );
367 SetAverageQEPINDiodeAvailable ( kFALSE );
368
369 fQEBlindPixel [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen;
370 fQEBlindPixelVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr;
371 fQEFFactor [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen;
372 fQEFFactorVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr;
373 fQECombined [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen;
374 fQECombinedVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr;
375 fQEPINDiode [ MCalibrationCam::kGREEN ] = gkDefaultQEGreen;
376 fQEPINDiodeVar [ MCalibrationCam::kGREEN ] = gkDefaultQEGreenErr*gkDefaultQEGreenErr;
377
378 SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kGREEN);
379 SetFFactorMethodValid ( kFALSE, MCalibrationCam::kGREEN);
380 SetCombinedMethodValid ( kFALSE, MCalibrationCam::kGREEN);
381 SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kGREEN);
382
383 fQEBlindPixel [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue;
384 fQEBlindPixelVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr;
385 fQEFFactor [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue;
386 fQEFFactorVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr;
387 fQECombined [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue;
388 fQECombinedVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr;
389 fQEPINDiode [ MCalibrationCam::kBLUE ] = gkDefaultQEBlue;
390 fQEPINDiodeVar [ MCalibrationCam::kBLUE ] = gkDefaultQEBlueErr*gkDefaultQEBlueErr;
391
392 SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kBLUE);
393 SetFFactorMethodValid ( kFALSE, MCalibrationCam::kBLUE);
394 SetCombinedMethodValid ( kFALSE, MCalibrationCam::kBLUE);
395 SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kBLUE);
396
397 fQEBlindPixel [ MCalibrationCam::kUV ] = gkDefaultQEUV;
398 fQEBlindPixelVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr;
399 fQEFFactor [ MCalibrationCam::kUV ] = gkDefaultQEUV;
400 fQEFFactorVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr;
401 fQECombined [ MCalibrationCam::kUV ] = gkDefaultQEUV;
402 fQECombinedVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr;
403 fQEPINDiode [ MCalibrationCam::kUV ] = gkDefaultQEUV;
404 fQEPINDiodeVar [ MCalibrationCam::kUV ] = gkDefaultQEUVErr*gkDefaultQEUVErr;
405
406 SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kUV);
407 SetFFactorMethodValid ( kFALSE, MCalibrationCam::kUV);
408 SetCombinedMethodValid ( kFALSE, MCalibrationCam::kUV);
409 SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kUV);
410
411 fQEBlindPixel [ MCalibrationCam::kCT1 ] = gkDefaultQECT1;
412 fQEBlindPixelVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err;
413 fQEFFactor [ MCalibrationCam::kCT1 ] = gkDefaultQECT1;
414 fQEFFactorVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err;
415 fQECombined [ MCalibrationCam::kCT1 ] = gkDefaultQECT1;
416 fQECombinedVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err;
417 fQEPINDiode [ MCalibrationCam::kCT1 ] = gkDefaultQECT1;
418 fQEPINDiodeVar [ MCalibrationCam::kCT1 ] = gkDefaultQECT1Err*gkDefaultQECT1Err;
419
420 SetBlindPixelMethodValid ( kFALSE, MCalibrationCam::kCT1);
421 SetFFactorMethodValid ( kFALSE, MCalibrationCam::kCT1);
422 SetCombinedMethodValid ( kFALSE, MCalibrationCam::kCT1);
423 SetPINDiodeMethodValid ( kFALSE, MCalibrationCam::kCT1);
424
425 fAvNormBlindPixel = 1.;
426 fAvNormBlindPixelVar = 0.;
427 fAvNormCombined = 1.;
428 fAvNormCombinedVar = 0.;
429 fAvNormFFactor = 1.;
430 fAvNormFFactorVar = 0.;
431 fAvNormPINDiode = 1.;
432 fAvNormPINDiodeVar = 0.;
433
434 MCalibrationPix::Clear();
435}
436
437
438// -----------------------------------------------------------------
439//
440// Return the average Default QE (depending on zenith angle)
441// FIXME: The zenith angle dependency is not yet implemented
442//
443const Float_t MCalibrationQEPix::GetAverageQE( const Float_t zenith ) const
444{
445 // return gkDefaultAverageQE ;
446 return fAverageQE;
447}
448
449// -----------------------------------------------------------------
450//
451// Return the relative variance of the average Default QE (depending on zenith angle)
452// FIXME: The zenith angle dependency is not yet implemented
453//
454const Float_t MCalibrationQEPix::GetAverageQERelVar( const Float_t zenith ) const
455{
456 return gkDefaultAverageQEErr * gkDefaultAverageQEErr / (gkDefaultAverageQE * gkDefaultAverageQE );
457}
458
459// -----------------------------------------------------------------
460//
461// Return the relative variance of the average normalization (Blind Pixel Method)
462// FIXME: The zenith angle dependency is not yet implemented
463//
464const Float_t MCalibrationQEPix::GetAvNormBlindPixelRelVar( ) const
465{
466 return fAvNormBlindPixelVar / (fAvNormBlindPixel * fAvNormBlindPixel );
467}
468
469// -----------------------------------------------------------------
470//
471// Return the relative variance of the average normalization (Combined Method)
472// FIXME: The zenith angle dependency is not yet implemented
473//
474const Float_t MCalibrationQEPix::GetAvNormCombinedRelVar( ) const
475{
476 return fAvNormCombinedVar / (fAvNormCombined * fAvNormCombined );
477}
478
479// -----------------------------------------------------------------
480//
481// Return the relative variance of the average normalization (F-Factor Method)
482//
483const Float_t MCalibrationQEPix::GetAvNormFFactorRelVar( ) const
484{
485 return fAvNormFFactorVar / (fAvNormFFactor * fAvNormFFactor );
486}
487
488// -----------------------------------------------------------------
489//
490// Return the relative variance of the average normalization (PIN Diode Method)
491// FIXME: The zenith angle dependency is not yet implemented
492//
493const Float_t MCalibrationQEPix::GetAvNormPINDiodeRelVar( ) const
494{
495 return fAvNormPINDiodeVar / (fAvNormPINDiode * fAvNormPINDiode );
496}
497
498// ------------------------------------------------------------------------------
499//
500// Get the default Quantum efficiency for pulser colour "col"
501//
502Float_t MCalibrationQEPix::GetDefaultQE( const MCalibrationCam::PulserColor_t col ) const
503{
504 switch (col)
505 {
506 case MCalibrationCam::kGREEN:
507 return gkDefaultQEGreen;
508 break;
509 case MCalibrationCam::kBLUE:
510 return gkDefaultQEBlue;
511 break;
512 case MCalibrationCam::kUV:
513 return gkDefaultQEUV;
514 break;
515 case MCalibrationCam::kCT1:
516 return gkDefaultQECT1;
517 break;
518 default:
519 return gkDefaultQECT1;
520 break;
521 }
522 return -1.;
523}
524
525// ------------------------------------------------------------------------------
526//
527// Get the relative variance of the default Quantum efficiency for pulser colour "col"
528//
529Float_t MCalibrationQEPix::GetDefaultQERelVar( const MCalibrationCam::PulserColor_t col ) const
530{
531
532 switch (col)
533 {
534 case MCalibrationCam::kGREEN:
535 return gkDefaultQEGreenErr * gkDefaultQEGreenErr / (gkDefaultQEGreen * gkDefaultQEGreen );
536 break;
537 case MCalibrationCam::kBLUE:
538 return gkDefaultQEBlueErr * gkDefaultQEBlueErr / (gkDefaultQEBlue * gkDefaultQEBlue );
539 break;
540 case MCalibrationCam::kUV:
541 return gkDefaultQEUVErr * gkDefaultQEUVErr / (gkDefaultQEUV * gkDefaultQEUV );
542 break;
543 case MCalibrationCam::kCT1:
544 return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 );
545 break;
546 default:
547 return gkDefaultQECT1Err * gkDefaultQECT1Err / (gkDefaultQECT1 * gkDefaultQECT1 );
548 break;
549 }
550 return -1.;
551}
552
553// ------------------------------------------------------------------------------
554//
555// Get the light guides efficiency depending on the pulser colour "col"
556// FIXME: Lacking detailed measurement, these number are not yet available
557// for the individual colours and therefore, only one same number is
558// returned, namely gkLightGuidesEff
559//
560Float_t MCalibrationQEPix::GetLightGuidesEff( const MCalibrationCam::PulserColor_t col ) const
561{
562 switch (col)
563 {
564 case MCalibrationCam::kGREEN:
565 return gkLightGuidesEffGreen;
566 break;
567 case MCalibrationCam::kBLUE:
568 return gkLightGuidesEffBlue;
569 break;
570 case MCalibrationCam::kUV:
571 return gkLightGuidesEffUV;
572 break;
573 case MCalibrationCam::kCT1:
574 return gkLightGuidesEffCT1;
575 break;
576 default:
577 return gkLightGuidesEffCT1;
578 break;
579 }
580 return -1.;
581}
582
583// ------------------------------------------------------------------------------
584//
585// Get the relative variance of the light guides efficiency depending on the
586// pulser colour "col"
587// FIXME: Lacking detailed measurement, these number are not yet available
588// for the individual colours and therefore, only one same number is
589// returned, namely gkLightGuidesEffErr^2 / gkLightGuidesEff^2
590//
591Float_t MCalibrationQEPix::GetLightGuidesEffRelVar( const MCalibrationCam::PulserColor_t col ) const
592{
593
594 switch (col)
595 {
596 case MCalibrationCam::kGREEN:
597 return gkLightGuidesEffGreenErr * gkLightGuidesEffGreenErr / gkLightGuidesEffGreen / gkLightGuidesEffGreen;
598 break;
599 case MCalibrationCam::kBLUE:
600 return gkLightGuidesEffBlueErr * gkLightGuidesEffBlueErr / gkLightGuidesEffBlue / gkLightGuidesEffBlue;
601 break;
602 case MCalibrationCam::kUV:
603 return gkLightGuidesEffUVErr * gkLightGuidesEffUVErr / gkLightGuidesEffUV / gkLightGuidesEffUV;
604 break;
605 case MCalibrationCam::kCT1:
606 return gkLightGuidesEffCT1Err * gkLightGuidesEffCT1Err / gkLightGuidesEffCT1 / gkLightGuidesEffCT1;
607 break;
608 default:
609 return gkLightGuidesEffCT1Err * gkLightGuidesEffCT1Err / gkLightGuidesEffCT1 / gkLightGuidesEffCT1;
610 break;
611 }
612 return -1.;
613}
614
615// ------------------------------------------------------------------------------
616//
617// Get the light guides efficiency for Cherenkov spectra,
618// depending on the zenith angle of the telescope
619// FIXME: Lacking detailed measurement, these number are not yet available
620// for the individual colours and therefore, only one same number is
621// returned, namely gkLightGuidesEffBlue
622//
623Float_t MCalibrationQEPix::GetLightGuidesEff( const Float_t zenith ) const
624{
625 return gkLightGuidesEffBlue;
626}
627
628
629// ------------------------------------------------------------------------------
630//
631// Get the relative variance of the light guides efficiency for Cherenkov spectra
632// depending on the zenith angle of the telescope
633// FIXME: Lacking detailed measurement, these number are not yet available
634// for the individual colours and therefore, only one same number is
635// returned, namely gkLightGuidesEffBlueErr^2 / gkLightGuidesBlueEff^2
636//
637Float_t MCalibrationQEPix::GetLightGuidesEffRelVar( const Float_t zenith ) const
638{
639 return gkLightGuidesEffBlueErr * gkLightGuidesEffBlueErr / gkLightGuidesEffBlue / gkLightGuidesEffBlue;
640}
641
642
643
644// ------------------------------------------------------------------------------
645//
646// Get the calculated Quantum efficiency with the blind pixel method,
647// obtained with pulser colour "col"
648//
649Float_t MCalibrationQEPix::GetQEBlindPixel( const MCalibrationCam::PulserColor_t col ) const
650{
651 return fQEBlindPixel[col];
652}
653
654// ------------------------------------------------------------------------------
655//
656// Get the error on the calculated Quantum efficiency with the blind pixel method,
657// obtained with pulser colour "col"
658// Tests for variances smaller than 0. (e.g. if it has not yet been set)
659// and returns -1. in that case
660//
661Float_t MCalibrationQEPix::GetQEBlindPixelErr( const MCalibrationCam::PulserColor_t col ) const
662{
663
664 if (fQEBlindPixelVar[col] < 0.)
665 return -1.;
666
667 return TMath::Sqrt(fQEBlindPixelVar[col]);
668
669}
670
671// ------------------------------------------------------------------------------
672//
673// Get the relative variance of the calculated Quantum efficiency with the blind pixel method,
674// obtained with pulser colour "col"
675// Tests for variances smaller than 0. (e.g. if it has not yet been set)
676// and returns -1. in that case
677// Tests for quantum efficiency equal to 0. and returns -1. in that case
678//
679Float_t MCalibrationQEPix::GetQEBlindPixelRelVar( const MCalibrationCam::PulserColor_t col ) const
680{
681
682 if (fQEBlindPixelVar[col] < 0.)
683 return -1.;
684 if (fQEBlindPixel[col] < 0.)
685 return -1.;
686 return fQEBlindPixelVar[col] / ( fQEBlindPixel[col] * fQEBlindPixel[col] );
687
688}
689
690// ------------------------------------------------------------------------------
691//
692// Get the calculated Quantum efficiency with the combination of the three methods
693// obtained with pulser colour "col"
694//
695Float_t MCalibrationQEPix::GetQECombined( const MCalibrationCam::PulserColor_t col ) const
696{
697 return fQECombined[col];
698}
699
700
701// ------------------------------------------------------------------------------
702//
703// Get the error on the calculated Quantum efficiency with the combination of the three methods
704// obtained with pulser colour "col"
705// Tests for variances smaller than 0. (e.g. if it has not yet been set)
706// and returns -1. in that case
707//
708Float_t MCalibrationQEPix::GetQECombinedErr( const MCalibrationCam::PulserColor_t col ) const
709{
710
711 if (fQECombinedVar[col] < 0.)
712 return -1.;
713
714 return TMath::Sqrt(fQECombinedVar[col]);
715
716}
717
718
719// ----------------------------------------------------------------------------------------
720//
721// Get the relative variance of the calculated Quantum efficiency with the combination of
722// the three methods,
723// obtained with pulser colour "col"
724// Tests for variances smaller than 0. (e.g. if it has not yet been set)
725// and returns -1. in that case
726// Tests for quantum efficiency equal to 0. and returns -1. in that case
727//
728Float_t MCalibrationQEPix::GetQECombinedRelVar( const MCalibrationCam::PulserColor_t col ) const
729{
730
731 if (fQECombinedVar[col] < 0.)
732 return -1.;
733 if (fQECombined[col] < 0.)
734 return -1.;
735 return fQECombinedVar[col] / ( fQECombined[col] * fQECombined[col] );
736
737}
738
739// ------------------------------------------------------------------------------
740//
741// Get the calculated Quantum efficiency with the F-Factor method
742// obtained with pulser colour "col"
743//
744Float_t MCalibrationQEPix::GetQEFFactor( const MCalibrationCam::PulserColor_t col ) const
745{
746 return fQEFFactor[col];
747}
748
749
750// ------------------------------------------------------------------------------
751//
752// Get the error on the calculated Quantum efficiency with the F-Factor method,
753// obtained with pulser colour "col"
754// Tests for variances smaller than 0. (e.g. if it has not yet been set)
755// and returns -1. in that case
756//
757Float_t MCalibrationQEPix::GetQEFFactorErr( const MCalibrationCam::PulserColor_t col ) const
758{
759
760 if (fQEFFactorVar[col] < 0.)
761 return -1.;
762
763 return TMath::Sqrt(fQEFFactorVar[col]);
764
765}
766
767
768// ----------------------------------------------------------------------------------------
769//
770// Get the relative variance of the calculated Quantum efficiency with the F-Factor method,
771// obtained with pulser colour "col"
772// Tests for variances smaller than 0. (e.g. if it has not yet been set)
773// and returns -1. in that case
774// Tests for quantum efficiency equal to 0. and returns -1. in that case
775//
776Float_t MCalibrationQEPix::GetQEFFactorRelVar( const MCalibrationCam::PulserColor_t col ) const
777{
778
779 if (fQEFFactorVar[col] < 0.)
780 return -1.;
781 if (fQEFFactor[col] < 0.)
782 return -1.;
783 return fQEFFactorVar[col] / ( fQEFFactor[col] * fQEFFactor[col] );
784
785}
786
787// ------------------------------------------------------------------------------
788//
789// Get the calculated Quantum efficiency with the PIN-Diode method
790// obtained with pulser colour "col"
791//
792Float_t MCalibrationQEPix::GetQEPINDiode( const MCalibrationCam::PulserColor_t col ) const
793{
794 return fQEPINDiode[col];
795}
796
797
798// ------------------------------------------------------------------------------
799//
800// Get the error on the calculated Quantum efficiency with the PIN Diode method,
801// obtained with pulser colour "col"
802// Tests for variances smaller than 0. (e.g. if it has not yet been set)
803// and returns -1. in that case
804//
805Float_t MCalibrationQEPix::GetQEPINDiodeErr( const MCalibrationCam::PulserColor_t col ) const
806{
807
808 if (fQEPINDiodeVar[col] < 0.)
809 return -1.;
810
811 return TMath::Sqrt(fQEPINDiodeVar[col]);
812
813}
814
815// ----------------------------------------------------------------------------------------
816//
817// Get the relative variance of the calculated Quantum efficiency with the PIN Diode method,
818// obtained with pulser colour "col"
819// Tests for variances smaller than 0. (e.g. if it has not yet been set)
820// and returns -1. in that case
821// Tests for quantum efficiency equal to 0. and returns -1. in that case
822//
823Float_t MCalibrationQEPix::GetQEPINDiodeRelVar( const MCalibrationCam::PulserColor_t col ) const
824{
825
826 if (fQEPINDiodeVar[col] < 0.)
827 return -1.;
828 if (fQEPINDiode[col] < 0.)
829 return -1.;
830 return fQEPINDiodeVar[col] / ( fQEPINDiode[col] * fQEPINDiode[col] );
831
832}
833
834// ------------------------------------------------------------------------------
835//
836// Get the averaged Quantum efficiency folded over the cascade spectrum, obtained
837// with the blind pixel method and averaged over the results from the different colours.
838//
839Float_t MCalibrationQEPix::GetQECascadesBlindPixel( const Float_t zenith ) const
840{
841 return fAvNormBlindPixel * GetAverageQE ( zenith );
842}
843
844// ------------------------------------------------------------------------------
845//
846// Get the variance of the averaged Quantum efficiency folded over the cascade spectrum,
847// obtained with the blind pixel method and averaged over the results from the
848// different colours.
849//
850Float_t MCalibrationQEPix::GetQECascadesBlindPixelVar( const Float_t zenith ) const
851{
852 return ( GetAvNormBlindPixelRelVar() + GetAverageQERelVar(zenith))
853 * GetQECascadesBlindPixel(zenith) * GetQECascadesBlindPixel(zenith);
854}
855
856// ------------------------------------------------------------------------------
857//
858// Get the error on the averaged Quantum efficiency folded over the cascade spectrum,
859// obtained with the blind pixel method and averaged over the results from the
860// different colours.
861//
862Float_t MCalibrationQEPix::GetQECascadesBlindPixelErr( const Float_t zenith ) const
863{
864 const Float_t var = GetQECascadesBlindPixelVar(zenith);
865
866 if (var < 0.)
867 return -1.;
868
869 return TMath::Sqrt(var);
870}
871
872// ------------------------------------------------------------------------------
873//
874// Get the averaged Quantum efficiency folded over the cascade spectrum, obtained
875// with the combination of the three methods and averaged over the results
876// from the different colours.
877//
878Float_t MCalibrationQEPix::GetQECascadesCombined( const Float_t zenith ) const
879{
880 return fAvNormCombined * GetAverageQE ( zenith );
881}
882
883// ------------------------------------------------------------------------------
884//
885// Get the error on the averaged Quantum efficiency folded over the cascade spectrum,
886// obtained with the combined method and averaged over the results from the
887// different colours.
888//
889Float_t MCalibrationQEPix::GetQECascadesCombinedErr( const Float_t zenith ) const
890{
891 const Float_t var = GetQECascadesCombinedVar(zenith);
892
893 if (var < 0.)
894 return -1.;
895
896 return TMath::Sqrt(var);
897}
898
899// ------------------------------------------------------------------------------
900//
901// Get the variance of the averaged Quantum efficiency folded over the cascade spectrum,
902// obtained with the combination of the three methods and averaged over the results from the
903// different colours.
904//
905Float_t MCalibrationQEPix::GetQECascadesCombinedVar( const Float_t zenith ) const
906{
907 return ( GetAvNormCombinedRelVar() + GetAverageQERelVar(zenith))
908 * GetQECascadesCombined(zenith) * GetQECascadesCombined(zenith);
909}
910
911// ------------------------------------------------------------------------------
912//
913// Get the averaged Quantum efficiency folded over the cascade spectrum, obtained
914// with the F-Factor method and averaged over the results from the different colours.
915//
916Float_t MCalibrationQEPix::GetQECascadesFFactor( const Float_t zenith ) const
917{
918 return fAvNormFFactor * GetAverageQE ( zenith );
919}
920
921// ------------------------------------------------------------------------------
922//
923// Get the error on the averaged Quantum efficiency folded over the cascade spectrum,
924// obtained with the F-Factor method and averaged over the results from the
925// different colours.
926//
927Float_t MCalibrationQEPix::GetQECascadesFFactorErr( const Float_t zenith ) const
928{
929 const Float_t var = GetQECascadesFFactorVar(zenith);
930
931 if (var < 0.)
932 return -1.;
933
934 return TMath::Sqrt(var);
935}
936
937// ------------------------------------------------------------------------------
938//
939// Get the variance of the averaged Quantum efficiency folded over the cascade spectrum,
940// obtained with the F-Factor method and averaged over the results from the
941// different colours.
942//
943Float_t MCalibrationQEPix::GetQECascadesFFactorVar( const Float_t zenith ) const
944{
945 return ( GetAvNormFFactorRelVar() + GetAverageQERelVar(zenith))
946 * GetQECascadesFFactor(zenith) * GetQECascadesFFactor(zenith);
947}
948
949// ------------------------------------------------------------------------------
950//
951// Get the averaged Quantum efficiency folded over the cascade spectrum, obtained
952// with the PIN Diode method and averaged over the results from the different colours.
953//
954Float_t MCalibrationQEPix::GetQECascadesPINDiode( const Float_t zenith ) const
955{
956 return fAvNormPINDiode * GetAverageQE ( zenith );
957}
958
959// ------------------------------------------------------------------------------
960//
961// Get the error on the averaged Quantum efficiency folded over the cascade spectrum,
962// obtained with the PIN Diode method and averaged over the results from the
963// different colours.
964//
965Float_t MCalibrationQEPix::GetQECascadesPINDiodeErr( const Float_t zenith ) const
966{
967 const Float_t var = GetQECascadesPINDiodeVar(zenith);
968
969 if (var < 0.)
970 return -1.;
971
972 return TMath::Sqrt(var);
973}
974
975// ------------------------------------------------------------------------------
976//
977// Get the variance of the averaged Quantum efficiency folded over the cascade spectrum,
978// obtained with the PIN Diode method and averaged over the results from the
979// different colours.
980//
981Float_t MCalibrationQEPix::GetQECascadesPINDiodeVar( const Float_t zenith ) const
982{
983 return ( GetAvNormPINDiodeRelVar() + GetAverageQERelVar(zenith))
984 * GetQECascadesPINDiode(zenith) * GetQECascadesPINDiode(zenith);
985}
986
987// -----------------------------------------------------------------
988//
989// Return the overall collection efficiency of the PMT
990//
991Float_t MCalibrationQEPix::GetPMTCollectionEff() const
992{
993 return gkPMTCollectionEff;
994}
995
996// -----------------------------------------------------------------
997//
998// Return the relative variance of the collection efficiency of the PMT
999//
1000Float_t MCalibrationQEPix::GetPMTCollectionEffRelVar() const
1001{
1002 return gkPMTCollectionEffErr * gkPMTCollectionEffErr / gkPMTCollectionEff / gkPMTCollectionEff;
1003}
1004
1005// ------------------------------------------------------------------------------
1006//
1007// Test if the average QE can be obtained from the blind pixel method
1008//
1009Bool_t MCalibrationQEPix::IsAverageQEBlindPixelAvailable() const
1010{
1011 return TESTBIT(fAvailableFlags,kAverageQEBlindPixelAvailable);
1012}
1013
1014// ------------------------------------------------------------------------------
1015//
1016// Test if the average QE can be obtained from the combination of the three methods
1017//
1018Bool_t MCalibrationQEPix::IsAverageQECombinedAvailable() const
1019{
1020 return TESTBIT(fAvailableFlags,kAverageQECombinedAvailable);
1021}
1022
1023// ------------------------------------------------------------------------------
1024//
1025// Test if the average QE can be obtained from the F-Factor method
1026//
1027Bool_t MCalibrationQEPix::IsAverageQEFFactorAvailable() const
1028{
1029 return TESTBIT(fAvailableFlags,kAverageQEFFactorAvailable);
1030}
1031
1032// ------------------------------------------------------------------------------
1033//
1034// Test if the average QE can be obtained from the PIN Diode method
1035//
1036Bool_t MCalibrationQEPix::IsAverageQEPINDiodeAvailable() const
1037{
1038 return TESTBIT(fAvailableFlags,kAverageQEPINDiodeAvailable);
1039}
1040
1041// ------------------------------------------------------------------------------
1042//
1043// Test if any of the three colours has already been calibrated with the blind pixel method
1044//
1045Bool_t MCalibrationQEPix::IsBlindPixelMethodValid () const
1046{
1047
1048 if (IsBlindPixelMethodValid (MCalibrationCam::kGREEN))
1049 return kTRUE;
1050 if (IsBlindPixelMethodValid (MCalibrationCam::kBLUE ))
1051 return kTRUE;
1052 if (IsBlindPixelMethodValid (MCalibrationCam::kUV ))
1053 return kTRUE;
1054 if (IsBlindPixelMethodValid (MCalibrationCam::kCT1 ))
1055 return kTRUE;
1056
1057 return kFALSE;
1058}
1059
1060// ------------------------------------------------------------------------------
1061//
1062// Test if any of the three colours has already been calibrated with the combination
1063// of the three methods
1064//
1065Bool_t MCalibrationQEPix::IsCombinedMethodValid () const
1066{
1067 if (IsCombinedMethodValid (MCalibrationCam::kGREEN))
1068 return kTRUE;
1069 if (IsCombinedMethodValid (MCalibrationCam::kBLUE ))
1070 return kTRUE;
1071 if (IsCombinedMethodValid (MCalibrationCam::kUV ))
1072 return kTRUE;
1073 if (IsCombinedMethodValid (MCalibrationCam::kCT1 ))
1074 return kTRUE;
1075
1076 return kFALSE;
1077}
1078
1079// ------------------------------------------------------------------------------
1080//
1081// Test if any of the three colours has already been calibrated with the F-Factor method
1082//
1083Bool_t MCalibrationQEPix::IsFFactorMethodValid () const
1084{
1085 if (IsFFactorMethodValid (MCalibrationCam::kGREEN))
1086 return kTRUE;
1087 if (IsFFactorMethodValid (MCalibrationCam::kBLUE ))
1088 return kTRUE;
1089 if (IsFFactorMethodValid (MCalibrationCam::kUV ))
1090 return kTRUE;
1091 if (IsFFactorMethodValid (MCalibrationCam::kCT1 ))
1092 return kTRUE;
1093
1094 return kFALSE;
1095}
1096
1097
1098// ------------------------------------------------------------------------------
1099//
1100// Test if any of the three colours has already been calibrated with the PIN Diode method
1101//
1102Bool_t MCalibrationQEPix::IsPINDiodeMethodValid () const
1103{
1104 if (IsPINDiodeMethodValid (MCalibrationCam::kGREEN))
1105 return kTRUE;
1106 if (IsPINDiodeMethodValid (MCalibrationCam::kBLUE ))
1107 return kTRUE;
1108 if (IsPINDiodeMethodValid (MCalibrationCam::kUV ))
1109 return kTRUE;
1110 if (IsPINDiodeMethodValid (MCalibrationCam::kCT1 ))
1111 return kTRUE;
1112
1113 return kFALSE;
1114}
1115
1116// ------------------------------------------------------------------------------
1117//
1118// Test if the colour "col" has already been calibrated with the Blind Pixel method
1119//
1120Bool_t MCalibrationQEPix::IsBlindPixelMethodValid (MCalibrationCam::PulserColor_t col) const
1121{
1122 return TESTBIT(fValidFlags[ col ],kBlindPixelMethodValid);
1123}
1124
1125// ------------------------------------------------------------------------------
1126//
1127// Test if the colour "col" has already been calibrated with the combination of
1128// the three methods
1129//
1130Bool_t MCalibrationQEPix::IsCombinedMethodValid (MCalibrationCam::PulserColor_t col) const
1131{
1132 return TESTBIT(fValidFlags[ col ],kCombinedMethodValid);
1133}
1134
1135// ------------------------------------------------------------------------------
1136//
1137// Test if the colour "col" has already been calibrated with the F-Factor method
1138//
1139Bool_t MCalibrationQEPix::IsFFactorMethodValid (MCalibrationCam::PulserColor_t col) const
1140{
1141 return TESTBIT(fValidFlags[ col ],kFFactorMethodValid);
1142}
1143
1144// ------------------------------------------------------------------------------
1145//
1146// Test if the colour "col" has already been calibrated with the PIN Diode method
1147//
1148Bool_t MCalibrationQEPix::IsPINDiodeMethodValid (MCalibrationCam::PulserColor_t col) const
1149{
1150 return TESTBIT(fValidFlags[ col ],kPINDiodeMethodValid);
1151}
1152
1153// ------------------------------------------------------------------------------
1154//
1155// Set the bit Average QE Blind Pixel method available from outside (only for MC!)
1156//
1157void MCalibrationQEPix::SetAverageQEBlindPixelAvailable ( Bool_t b )
1158{
1159 if (b)
1160 SETBIT(fAvailableFlags,kAverageQEBlindPixelAvailable);
1161 else
1162 CLRBIT(fAvailableFlags,kAverageQEBlindPixelAvailable);
1163}
1164
1165// ------------------------------------------------------------------------------
1166//
1167// Set the bit Average QE combination of three methods available from outside (only for MC!)
1168//
1169void MCalibrationQEPix::SetAverageQECombinedAvailable ( Bool_t b )
1170{
1171 if (b)
1172 SETBIT(fAvailableFlags,kAverageQECombinedAvailable);
1173 else
1174 CLRBIT(fAvailableFlags,kAverageQECombinedAvailable);
1175}
1176
1177// ------------------------------------------------------------------------------
1178//
1179// Set the bit Average QE F-Factor method available from outside (only for MC!)
1180//
1181void MCalibrationQEPix::SetAverageQEFFactorAvailable ( Bool_t b )
1182{
1183 if (b)
1184 SETBIT(fAvailableFlags,kAverageQEFFactorAvailable);
1185 else
1186 CLRBIT(fAvailableFlags,kAverageQEFFactorAvailable);
1187}
1188
1189// ------------------------------------------------------------------------------
1190//
1191// Set the bit Average QE PIN Diode method available from outside (only for MC!)
1192//
1193void MCalibrationQEPix::SetAverageQEPINDiodeAvailable ( Bool_t b )
1194{
1195 if (b)
1196 SETBIT(fAvailableFlags,kAverageQEPINDiodeAvailable);
1197 else
1198 CLRBIT(fAvailableFlags,kAverageQEPINDiodeAvailable);
1199}
1200
1201// ------------------------------------------------------------------------------
1202//
1203// Set the bit QE Blind Pixel method available from colour "col"
1204//
1205void MCalibrationQEPix::SetBlindPixelMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col )
1206{
1207 if (b)
1208 SETBIT(fValidFlags[ col ],kBlindPixelMethodValid);
1209 else
1210 CLRBIT(fValidFlags[ col ],kBlindPixelMethodValid);
1211}
1212
1213// ------------------------------------------------------------------------------
1214//
1215// Set the bit QE Combination of three methods available from colour "col"
1216//
1217void MCalibrationQEPix::SetCombinedMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col )
1218{
1219 if (b)
1220 SETBIT(fValidFlags[ col ],kCombinedMethodValid);
1221 else
1222 CLRBIT(fValidFlags[ col ],kCombinedMethodValid);
1223}
1224
1225// ------------------------------------------------------------------------------
1226//
1227// Set the bit QE F-Factor method available from colour "col"
1228//
1229void MCalibrationQEPix::SetFFactorMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col )
1230{
1231 if (b)
1232 SETBIT(fValidFlags[ col ],kFFactorMethodValid);
1233 else
1234 CLRBIT(fValidFlags[ col ],kFFactorMethodValid);
1235}
1236
1237// ------------------------------------------------------------------------------
1238//
1239// Set the bit QE PIN Diode method available from colour "col"
1240//
1241void MCalibrationQEPix::SetPINDiodeMethodValid ( Bool_t b, MCalibrationCam::PulserColor_t col )
1242{
1243 if (b)
1244 SETBIT(fValidFlags[ col ],kPINDiodeMethodValid);
1245 else
1246 CLRBIT(fValidFlags[ col ],kPINDiodeMethodValid);
1247}
1248
1249// ------------------------------------------------------------------------------
1250//
1251// Update the Blind Pixel Method: Calculate new average QE's
1252//
1253Bool_t MCalibrationQEPix::UpdateBlindPixelMethod()
1254{
1255
1256 Float_t weightedav = 0.;
1257 Float_t sumweights = 0.;
1258
1259 AddAverageBlindPixelQEs(MCalibrationCam::kGREEN, weightedav, sumweights);
1260 AddAverageBlindPixelQEs(MCalibrationCam::kBLUE , weightedav, sumweights);
1261 AddAverageBlindPixelQEs(MCalibrationCam::kUV , weightedav, sumweights);
1262 AddAverageBlindPixelQEs(MCalibrationCam::kCT1 , weightedav, sumweights);
1263
1264 if (weightedav == 0. || sumweights == 0.)
1265 return kFALSE;
1266
1267 fAvNormBlindPixel = weightedav / sumweights;
1268 fAvNormBlindPixelVar = 1./ sumweights ;
1269
1270 SetAverageQEBlindPixelAvailable();
1271
1272 return kTRUE;
1273}
1274
1275// ------------------------------------------------------------------------------
1276//
1277// Update the Combination of the three Methods: Calculate new average QE's
1278//
1279Bool_t MCalibrationQEPix::UpdateCombinedMethod()
1280{
1281
1282 Float_t weightedav = 0.;
1283 Float_t sumweights = 0.;
1284
1285 AddAverageCombinedQEs(MCalibrationCam::kGREEN, weightedav, sumweights);
1286 AddAverageCombinedQEs(MCalibrationCam::kBLUE , weightedav, sumweights);
1287 AddAverageCombinedQEs(MCalibrationCam::kUV , weightedav, sumweights);
1288 AddAverageCombinedQEs(MCalibrationCam::kCT1 , weightedav, sumweights);
1289
1290 if (weightedav == 0. || sumweights == 0.)
1291 return kFALSE;
1292
1293 fAvNormCombined = weightedav / sumweights;
1294 fAvNormCombinedVar = 1./ sumweights ;
1295
1296 SetAverageQECombinedAvailable();
1297
1298 return kTRUE;
1299
1300}
1301
1302// ------------------------------------------------------------------------------
1303//
1304// Update the F-Factor Method: Calculate new average QE's
1305//
1306Bool_t MCalibrationQEPix::UpdateFFactorMethod()
1307{
1308
1309 Float_t weightedav = 0.;
1310 Float_t sumweights = 0.;
1311
1312 AddAverageFFactorQEs(MCalibrationCam::kGREEN, weightedav, sumweights);
1313 AddAverageFFactorQEs(MCalibrationCam::kBLUE , weightedav, sumweights);
1314 AddAverageFFactorQEs(MCalibrationCam::kUV , weightedav, sumweights);
1315 AddAverageFFactorQEs(MCalibrationCam::kCT1 , weightedav, sumweights);
1316
1317 if (weightedav == 0. || sumweights == 0.)
1318 return kFALSE;
1319
1320 fAvNormFFactor = weightedav / sumweights;
1321 fAvNormFFactorVar = 1./ sumweights ;
1322
1323 SetAverageQEFFactorAvailable();
1324
1325 return kTRUE;
1326
1327
1328}
1329
1330// ------------------------------------------------------------------------------
1331//
1332// Update the PIN Diode Method: Calculate new average QE's
1333//
1334Bool_t MCalibrationQEPix::UpdatePINDiodeMethod()
1335{
1336
1337 Float_t weightedav = 0.;
1338 Float_t sumweights = 0.;
1339
1340 AddAveragePINDiodeQEs(MCalibrationCam::kGREEN, weightedav, sumweights);
1341 AddAveragePINDiodeQEs(MCalibrationCam::kBLUE , weightedav, sumweights);
1342 AddAveragePINDiodeQEs(MCalibrationCam::kUV , weightedav, sumweights);
1343 AddAveragePINDiodeQEs(MCalibrationCam::kCT1 , weightedav, sumweights);
1344
1345 if (weightedav == 0. || sumweights == 0.)
1346 return kFALSE;
1347
1348 fAvNormPINDiode = weightedav / sumweights;
1349 fAvNormPINDiodeVar = 1./ sumweights ;
1350
1351 SetAverageQEPINDiodeAvailable();
1352
1353 return kTRUE;
1354
1355
1356}
1357
Note: See TracBrowser for help on using the repository browser.