source: trunk/MagicSoft/Mars/mhbase/MH3.cc@ 8731

/* ======================================================================== *\
!
! *
! * This file is part of MARS, the MAGIC Analysis and Reconstruction
! * Software. It is distributed to you in the hope that it can be a useful
! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
! * It is distributed WITHOUT ANY WARRANTY.
! *
! * Permission to use, copy, modify and distribute this software and its
! * documentation for any purpose is hereby granted without fee,
! * provided that the above copyright notice appear in all copies and
! * that both that copyright notice and this permission notice appear
! * in supporting documentation. It is provided "as is" without express
! * or implied warranty.
! *
!
!
!   Author(s): Thomas Bretz  2002 <mailto:tbretz@astro.uni-wuerzburg.de>
!
!   Copyright: MAGIC Software Development, 2000-2007
!
!
\* ======================================================================== */

/////////////////////////////////////////////////////////////////////////////
//
// MH3
//
// With this histogram you can fill a histogram with up to three
// variables from Mars parameter containers in an eventloop.
//
// In the constructor you can give up to three variables which should be
// filled in the histogram. Dependend on the number of given variables
// (data members) a TH1D, TH2D or TH3D is created.
// Specify the data mamber like the following:
//   "MHillas.fLength"
// Where MHillas is the name of the parameter container in the parameter
// list and fLength is the name of the data member which should be filled
// in the histogram. Assuming that your MHillas container has a different
// name (MyHillas) the name to give would be:
//   "MyHillas.fLength"
//
// If you want to use a different unit for histogramming use SetScaleX,
// SetScaleY and SetScaleZ.
//
//
// Binning name
// ============
//
// The axis binning is retrieved from the parameter list, too. Create a
// MBinning with the name "Binning" plus the name of your MH3 container
// plus the axis name ("X", "Y" or "Z") and add it to the parameter list.
//
// If the binning should have a different name than the histogram name
// the binning name can be added to the name, eg.:
//    SetName("MyHistName;MyXBins;MyYBins")
// Instead of BinningMyHistName[XYZ] the parameter list will be searched
// for BinningMyXBinning, BinningMyYBins and BinningMyHistNameZ
//
//
// Axis titles
// ===========
//
// 1) If no other title is given the rule for this axis is used.
// 2) If the MBinning used for this axis has a non-default Title
//    (MBinning::HasTitle) this title is used for the corresponding axis
// 3) If the MH3 has a non-default title (MH3::SetTitle called)
//    this title is set as the histogram title. It can be used to overwrite
//    the axis titles. For more information see TH1::SetTitle, eg.
//       SetTitle("MyHist;x[mm];y[cm];Counts");
//
//
// For example:
//   MH3 myhist("MHillas.fLength");
//   myhist.SetName("MyHist");
//   myhist.SetScaleX(geomcam.GetConvMm2Deg()); //convert length to degree
//   MBinning bins("BinningMyHistX");
//   bins.SetEdges(10, 0, 150);
//   plist.AddToList(&myhist);
//   plist.AddToList(&bins);
//
//
// Class Version 2:
// ----------------
//   - MDataChain *fData[3];        // Object from which the data is filled
//   + MData      *fData[3];        // Object from which the data is filled
//
// Class Version 3:
// ----------------
//   - Byte_t   fStyleBits
//   + MBinning fBins[3]
//
/////////////////////////////////////////////////////////////////////////////
#include "MH3.h"

#include <ctype.h>   // tolower
#include <fstream>

//#include <TPad.h>
#include <TStyle.h>
#include <TCanvas.h>

#include <TH2.h>
#include <TH3.h>
#include <TProfile.h>
#include <TProfile2D.h>

#include "MLog.h"
#include "MLogManip.h"

#include "MParList.h"
#include "MBinning.h"
#include "MDataPhrase.h"

ClassImp(MH3);

using namespace std;

const TString MH3::gsDefName  = "MH3";
const TString MH3::gsDefTitle = "Container for a n-D Mars Histogram";

// --------------------------------------------------------------------------
//
// Default constructor.
//
MH3::MH3(const unsigned int dim)
    : fDimension(dim>3?3:dim), fHist(NULL), fStyleBits(0)
{  
    switch (fDimension)
    {
    case 1:
        fHist = new TH1D;
        fHist->SetYTitle("Counts");
        break;
    case 2:
        fHist = new TH2D;
        fHist->SetZTitle("Counts");
        break;
    case 3:
        fHist = new TH3D;
        break;
    }

    fData[0] = NULL;
    fData[1] = NULL;
    fData[2] = NULL;

    fBins[0] = NULL;
    fBins[1] = NULL;
    fBins[2] = NULL;

    fName  = gsDefName;
    fTitle = gsDefTitle;

    if (fHist)
    {
        fHist->SetDirectory(NULL);
        fHist->UseCurrentStyle();
    }

    fScale[0] = 1;
    fScale[1] = 1;
    fScale[2] = 1;
}

// --------------------------------------------------------------------------
//
// Creates an TH1D. memberx is filled into the X-bins. For a more detailed
// description see the class description above.
//
MH3::MH3(const char *memberx)
    : fDimension(1), fStyleBits(0)
{
    fHist = new TH1D;

    fData[0] = new MDataPhrase(memberx);
    fData[1] = NULL;
    fData[2] = NULL;

    fBins[0] = NULL;
    fBins[1] = NULL;
    fBins[2] = NULL;

    fName  = gsDefName;
    fTitle = gsDefTitle;

    fHist->UseCurrentStyle();
    fHist->SetDirectory(NULL);
    fHist->SetYTitle("Counts");

    fScale[0] = 1;
    fScale[1] = 1;
    fScale[2] = 1;
}

MH3::MH3(const TH1 &h1)
    : fDimension(1), fStyleBits(0)
{
    if (h1.InheritsFrom(TH3::Class()))
        fDimension = 3;
    if (h1.InheritsFrom(TH2::Class()))
        fDimension = 2;

    fData[0] = NULL;
    fData[1] = NULL;
    fData[2] = NULL;

    fBins[0] = NULL;
    fBins[1] = NULL;
    fBins[2] = NULL;

    switch (fDimension)
    {
    case 3:
        fData[2] = new MDataPhrase(h1.GetZaxis()->GetTitle());
    case 2:
        fData[1] = new MDataPhrase(h1.GetYaxis()->GetTitle());
    case 1:
        fData[0] = new MDataPhrase(h1.GetXaxis()->GetTitle());
    }

    fName  = gsDefName;
    fTitle = gsDefTitle;

    fHist = (TH1*)h1.Clone();
    fHist->SetDirectory(NULL);

    fScale[0] = 1;
    fScale[1] = 1;
    fScale[2] = 1;
}

// --------------------------------------------------------------------------
//
// Creates an TH2D. memberx is filled into the X-bins. membery is filled
// into the Y-bins. For a more detailed description see the class
// description above.
//
MH3::MH3(const char *memberx, const char *membery)
    : fDimension(2), fStyleBits(0)
{
    fHist = new TH2D;

    fData[0] = new MDataPhrase(memberx);
    fData[1] = new MDataPhrase(membery);
    fData[2] = NULL;

    fBins[0] = NULL;
    fBins[1] = NULL;
    fBins[2] = NULL;

    fName  = gsDefName;
    fTitle = gsDefTitle;

    fHist->UseCurrentStyle();
    fHist->SetDirectory(NULL);
    fHist->SetZTitle("Counts");

    fScale[0] = 1;
    fScale[1] = 1;
    fScale[2] = 1;
}

// --------------------------------------------------------------------------
//
// Creates an TH3D. memberx is filled into the X-bins. membery is filled
// into the Y-bins. membery is filled into the Z-bins. For a more detailed
// description see the class description above.
//
MH3::MH3(const char *memberx, const char *membery, const char *memberz)
    : fDimension(3), fStyleBits(0)
{
    fHist = new TH3D;

    fData[0] = new MDataPhrase(memberx);
    fData[1] = new MDataPhrase(membery);
    fData[2] = new MDataPhrase(memberz);

    fBins[0] = NULL;
    fBins[1] = NULL;
    fBins[2] = NULL;

    fName  = gsDefName;
    fTitle = gsDefTitle;

    fHist->UseCurrentStyle();
    fHist->SetDirectory(NULL);

    fScale[0] = 1;
    fScale[1] = 1;
    fScale[2] = 1;
}

// --------------------------------------------------------------------------
//
// Deletes the histogram
//
MH3::~MH3()
{
    delete fHist;

    for (int i=0; i<3; i++)
        if (fData[i])
            delete fData[i];
}

// --------------------------------------------------------------------------
//
// Return the data members used by the data chain to be used in
// MTask::AddBranchToList
//
TString MH3::GetDataMember() const
{
    TString str=fData[0]->GetDataMember();
    if (fData[1])
    {
        str += ";";
        str += fData[1]->GetDataMember();
    }
    if (fData[2])
    {
        str += ";";
        str += fData[2]->GetDataMember();
    }
    return str;
}

// --------------------------------------------------------------------------
//
// Setup the Binning for the histograms automatically if the correct
// instances of MBinning are found in the parameter list
// For a more detailed description see class description above.
//
Bool_t MH3::SetupFill(const MParList *plist)
{
    // reset histogram (necessary if the same eventloop is run more than once) 
    fHist->Reset();

    // Tokenize name into name and binnings names
    TObjArray *tok = fName.Tokenize(";");

    const TString name = (*tok)[0] ? (*tok)[0]->GetName() : fName.Data();

    TString bx = (*tok)[1] ? (*tok)[1]->GetName() : Form("%sX", name.Data());
    TString by = (*tok)[2] ? (*tok)[2]->GetName() : Form("%sY", name.Data());
    TString bz = (*tok)[3] ? (*tok)[3]->GetName() : Form("%sZ", name.Data());

    bx.Prepend("Binning");
    by.Prepend("Binning");
    bz.Prepend("Binning");

    delete tok;


    MBinning *binsx = NULL;
    MBinning *binsy = NULL;
    MBinning *binsz = NULL;

    switch (fDimension)
    {
    case 3:
        binsz = fBins[2] ? fBins[2] : (MBinning*)plist->FindObject(bz, "MBinning");
        if (!binsz)
        {
            *fLog << err << dbginf << "MBinning '" << bz << "' not found... aborting." << endl;
            return kFALSE;
        }
        if (fData[2] && !fData[2]->PreProcess(plist))
            return kFALSE;
        if (fData[2])
            fHist->SetZTitle(fData[2]->GetTitle());
        if (binsz->HasTitle())
            fHist->SetZTitle(binsz->GetTitle());
        if (binsz->IsLogarithmic())
            fHist->SetBit(kIsLogz);
    case 2:
        binsy = fBins[1] ? fBins[1] : (MBinning*)plist->FindObject(by, "MBinning");
        if (!binsy)
        {
            *fLog << err << dbginf << "MBinning '" << by << "' not found... aborting." << endl;
            return kFALSE;
        }
        if (fData[1] && !fData[1]->PreProcess(plist))
            return kFALSE;
        if (fData[1])
            fHist->SetYTitle(fData[1]->GetTitle());
        if (binsy->HasTitle())
            fHist->SetYTitle(binsy->GetTitle());
        if (binsy->IsLogarithmic())
            fHist->SetBit(kIsLogy);
    case 1:
        binsx = fBins[0] ? fBins[0] : (MBinning*)plist->FindObject(bx, "MBinning");
        if (!binsx)
        {
            if (fDimension==1)
                binsx = (MBinning*)plist->FindObject("Binning"+fName, "MBinning");

            if (!binsx)
            {
                *fLog << err << dbginf << "Neither '" << bx << "' nor '" << binsx << fName << "' found... aborting." << endl;
                return kFALSE;
            }
        }
        if (fData[0] && !fData[0]->PreProcess(plist))
            return kFALSE;
        if (fData[0]!=NULL)
            fHist->SetXTitle(fData[0]->GetTitle());
        if (binsx->HasTitle())
            fHist->SetXTitle(binsx->GetTitle());
        if (binsx->IsLogarithmic())
            fHist->SetBit(kIsLogx);
    }

    TString title("Histogram for ");
    title += name;
    title += Form(" (%dD)", fDimension);

    fHist->SetName(name);
    fHist->SetTitle(fTitle==gsDefTitle ? title : fTitle);
    fHist->SetDirectory(0);

    switch (fDimension)
    {
    case 1:
        SetBinning(fHist, binsx);
        return kTRUE;
    case 2:
        SetBinning((TH2*)fHist, binsx, binsy);
        return kTRUE;
    case 3:
        SetBinning((TH3*)fHist, binsx, binsy, binsz);
        return kTRUE;
    }

    *fLog << err << "ERROR - MH3 has " << fDimension << " dimensions!" << endl;
    return kFALSE;
}

// --------------------------------------------------------------------------
//
// Set the name of the histogram ant the MH3 container
//
void MH3::SetName(const char *name)
{
    if (fHist)
    {
        if (gPad)
        {
            const TString pfx(Form("%sProfX", fHist->GetName()));
            const TString pfy(Form("%sProfY", fHist->GetName()));

            TProfile *p = 0;
            if ((p=dynamic_cast<TProfile*>(gPad->FindObject(pfx))))
                p->SetName(Form("%sProfX", name));
            if ((p=dynamic_cast<TProfile*>(gPad->FindObject(pfy))))
                p->SetName(Form("%sProfY", name));
        }

        fHist->SetName(name);
        fHist->SetDirectory(0);

    }
    MParContainer::SetName(name);
}

// --------------------------------------------------------------------------
//
// Set the title of the histogram ant the MH3 container
//
void MH3::SetTitle(const char *title)
{
    if (fHist)
        fHist->SetTitle(title);
    MParContainer::SetTitle(title);
}

// --------------------------------------------------------------------------
//
// Fills the one, two or three data members into our histogram
//
Bool_t MH3::Fill(const MParContainer *par, const Stat_t w)
{
    Double_t x=0;
    Double_t y=0;
    Double_t z=0;

    switch (fDimension)
    {
    case 3:
        z = fData[2]->GetValue()*fScale[2];
    case 2:
        y = fData[1]->GetValue()*fScale[1];
    case 1:
        x = fData[0]->GetValue()*fScale[0];
    }

    switch (fDimension)
    {
    case 3:
        ((TH3*)fHist)->Fill(x, y, z, w);
        return kTRUE;
    case 2:
        ((TH2*)fHist)->Fill(x, y, w);
        return kTRUE;
    case 1:
        fHist->Fill(x, w);
        return kTRUE;
    }

    return kFALSE;
}

// --------------------------------------------------------------------------
//
// If an auto range bit is set the histogram range of the corresponding
// axis is set to show only the non-empty bins (with a single empty bin
// on both sides)
//
Bool_t MH3::Finalize()
{
    Bool_t autorangex=TESTBIT(fStyleBits, 0);
    Bool_t autorangey=TESTBIT(fStyleBits, 1);
    //Bool_t autorangez=TESTBIT(fStyleBits, 2);

    Int_t lo, hi;

    if (autorangex)
    {
        GetRangeX(*fHist, lo, hi);
        fHist->GetXaxis()->SetRange(lo-2, hi+1);
    }
    if (autorangey)
    {
        GetRangeY(*fHist, lo, hi);
        fHist->GetYaxis()->SetRange(lo-2, hi+1);
    }
    /*
    if (autorangez)
    {
        GetRangeZ(*fHist, lo, hi);
        fHist->GetZaxis()->SetRange(lo-2, hi+1);
    }
    */
    return kTRUE;
}

void MH3::Paint(Option_t *o)
{
    TProfile *p=0;

    if (fDimension==2)
        MH::SetPalette("pretty");

    const TString pfx(Form("%sProfX", fHist->GetName()));
    if ((p=dynamic_cast<TProfile*>(gPad->FindObject(pfx))))
    {
        Int_t col = p->GetLineColor();
        p = ((TH2*)fHist)->ProfileX(pfx, -1, -1, "s");
        p->SetLineColor(col);
    }

    const TString pfy(Form("%sProfY", fHist->GetName()));
    if ((p=dynamic_cast<TProfile*>(gPad->FindObject(pfy))))
    {
        Int_t col = p->GetLineColor();
        p = ((TH2*)fHist)->ProfileY(pfy, -1, -1, "s");
        p->SetLineColor(col);
    }
/*
    if (fHist->TestBit(kIsLogx) && fHist->GetEntries()>0) gPad->SetLogx();
    if (fHist->TestBit(kIsLogy) && fHist->GetEntries()>0) gPad->SetLogy();
    if (fHist->TestBit(kIsLogz) && fHist->GetEntries()>0) gPad->SetLogz();
    */
}

void MH3::HandleLogAxis(TAxis &axe) const
{
    if (axe.GetXmax()>3000*axe.GetXmin())
        return;

    axe.SetMoreLogLabels();
    if (axe.GetXmax()<5000)
        axe.SetNoExponent();
}

// --------------------------------------------------------------------------
//
// Creates a new canvas and draws the histogram into it.
//
// Possible options are:
//   PROFX: Draw a x-profile into the histogram (for 2D histograms only)
//   PROFY: Draw a y-profile into the histogram (for 2D histograms only)
//   ONLY:  Draw the profile histogram only (for 2D histograms only)
//   BLUE:  Draw the profile in blue color instead of the histograms
//          line color
//
// If the kIsLog?-Bit is set the axis is displayed lkogarithmically.
// eg this is set when applying a logarithmic MBinning
//
// Be careful: The histogram belongs to this object and won't get deleted
// together with the canvas.
//
void MH3::Draw(Option_t *opt)
{
    TVirtualPad *pad = gPad ? gPad : MakeDefCanvas(fHist);
    pad->SetBorderMode(0);
    pad->SetGridx();
    pad->SetGridy();

    if (fHist->TestBit(kIsLogx))
    {
        pad->SetLogx();
        HandleLogAxis(*fHist->GetXaxis());
    }
    if (fHist->TestBit(kIsLogy))
    {
        pad->SetLogy();
        HandleLogAxis(*fHist->GetYaxis());
    }
    if (fHist->TestBit(kIsLogz))
    {
        pad->SetLogz();
        HandleLogAxis(*fHist->GetZaxis());
    }

    fHist->SetFillStyle(4000);

    TString str(opt);
    str.ToLower();

    const Bool_t only  = str.Contains("only")  && fDimension==2;
    const Bool_t same  = str.Contains("same")  && fDimension<3;
    const Bool_t blue  = str.Contains("blue")  && fDimension==2;
    const Bool_t profx = str.Contains("profx") && fDimension==2;
    const Bool_t profy = str.Contains("profy") && fDimension==2;

    str.ReplaceAll("only",  "");
    str.ReplaceAll("blue",  "");
    str.ReplaceAll("profx", "");
    str.ReplaceAll("profy", "");
    str.ReplaceAll(" ", "");

    if (same && fDimension==1)
    {
        fHist->SetLineColor(kBlue);
        fHist->SetMarkerColor(kBlue);
    }

    // FIXME: We may have to remove all our own options from str!
    if (!only)
        fHist->Draw(str);

    AppendPad();

    TProfile *p=0;
    if (profx)
    {
        const TString pfx(Form("%sProfX", fHist->GetName()));

        if (same && (p=dynamic_cast<TProfile*>(gPad->FindObject(pfx))))
            *fLog << warn << "TProfile " << pfx << " already in pad." << endl;

        p = ((TH2*)fHist)->ProfileX(pfx, -1, -1, "s");
        p->UseCurrentStyle();
        p->SetLineColor(blue ? kBlue : fHist->GetLineColor());
        p->SetBit(kCanDelete);
        p->SetDirectory(NULL);
        p->SetXTitle(fHist->GetXaxis()->GetTitle());
        p->SetYTitle(fHist->GetYaxis()->GetTitle());
        p->Draw(only&&!same?"":"same");
    }
    if (profy)
    {
        const TString pfy(Form("%sProfY", fHist->GetName()));

        if (same && (p=dynamic_cast<TProfile*>(gPad->FindObject(pfy))))
            *fLog << warn << "TProfile " << pfy << " already in pad." << endl;

        p = ((TH2*)fHist)->ProfileY(pfy, -1, -1, "s");
        p->UseCurrentStyle();
        p->SetLineColor(blue ? kBlue : fHist->GetLineColor());
        p->SetBit(kCanDelete);
        p->SetDirectory(NULL);
        p->SetYTitle(fHist->GetXaxis()->GetTitle());
        p->SetXTitle(fHist->GetYaxis()->GetTitle());
        p->Draw(only&&!same?"":"same");
    }

    //AppendPad("log");
}

// --------------------------------------------------------------------------
//
// Implementation of SavePrimitive. Used to write the call to a constructor
// to a macro. In the original root implementation it is used to write
// gui elements to a macro-file.
//
void MH3::StreamPrimitive(ostream &out) const
{
    TString name = GetUniqueName();

    out << "   MH3 " << name << "(\"";
    out << fData[0]->GetRule() << "\"";
    if (fDimension>1)
        out << ", \"" << fData[1]->GetRule() << "\"";
    if (fDimension>2)
        out << ", \"" << fData[2]->GetRule() << "\"";

    out << ");" << endl;

    if (fName!=gsDefName)
        out << "   " << name << ".SetName(\"" << fName << "\");" << endl;

    if (fTitle!=gsDefTitle)
        out << "   " << name << ".SetTitle(\"" << fTitle << "\");" << endl;

    switch (fDimension)
    {
    case 3:
        if (fScale[2]!=1)
            out << "   " << name << ".SetScaleZ(" << fScale[2] << ");" << endl;
    case 2:
        if (fScale[1]!=1)
            out << "   " << name << ".SetScaleY(" << fScale[1] << ");" << endl;
    case 1:
        if (fScale[0]!=1)
            out << "   " << name << ".SetScaleX(" << fScale[0] << ");" << endl;
    }
}

// --------------------------------------------------------------------------
//
// Used to rebuild a MH3 object of the same type (data members,
// dimension, ...)
//
MParContainer *MH3::New() const
{
    MH3 *h = NULL;

    if (fData[0] == NULL)
        h=new MH3(fDimension);
    else
        switch (fDimension)
        {
        case 1:
            h=new MH3(fData[0]->GetRule());
            break;
        case 2:
            h=new MH3(fData[0]->GetRule(), fData[1]->GetRule());
            break;
        case 3:
            h=new MH3(fData[0]->GetRule(), fData[1]->GetRule(), fData[2]->GetRule());
            break;
        }
    switch (fDimension)
    {
    case 3:
        h->SetScaleZ(fScale[2]);
    case 2:
        h->SetScaleY(fScale[1]);
    case 1:
        h->SetScaleX(fScale[0]);
    }
    return h;
}

TString MH3::GetRule(const Char_t axis) const
{
    switch (tolower(axis))
    {
    case 'x':
        return fData[0] ? fData[0]->GetRule() : TString("");
    case 'y':
        return fData[1] ? fData[1]->GetRule() : TString("");
    case 'z':
        return fData[2] ? fData[2]->GetRule() : TString("");
    default:
        return "<n/a>";
    }
}

// --------------------------------------------------------------------------
//
// Returns the total number of bins in a histogram (excluding under- and
// overflow bins)
//
Int_t MH3::GetNbins() const
{
    Int_t num = 1;

    switch (fDimension)
    {
    case 3:
        num *= fHist->GetNbinsZ()+2;
    case 2:
        num *= fHist->GetNbinsY()+2;
    case 1:
        num *= fHist->GetNbinsX()+2;
    }

    return num;
}

// --------------------------------------------------------------------------
//
// Returns the total number of bins in a histogram (excluding under- and
// overflow bins) Return -1 if bin is underflow or overflow
//
Int_t MH3::FindFixBin(Double_t x, Double_t y, Double_t z) const
{
    const TAxis &axex = *fHist->GetXaxis();
    const TAxis &axey = *fHist->GetYaxis();
    const TAxis &axez = *fHist->GetZaxis();

    Int_t binz = 0;
    Int_t biny = 0;
    Int_t binx = 0;

    switch (fDimension)
    {
    case 3:
        binz = axez.FindFixBin(z);
        if (binz>axez.GetLast() || binz<axez.GetFirst())
            return -1;
    case 2:
        biny = axey.FindFixBin(y);
        if (biny>axey.GetLast() || biny<axey.GetFirst())
            return -1;
    case 1:
        binx = axex.FindFixBin(x);
        if (binx<axex.GetFirst() || binx>axex.GetLast())
            return -1;
    }

    const Int_t nx = fHist->GetNbinsX()+2;
    const Int_t ny = fHist->GetNbinsY()+2;

    return binx + nx*(biny +ny*binz);
}