/* ======================================================================== *\ ! ! * ! * This file is part of MARS, the MAGIC Analysis and Reconstruction ! * Software. It is distributed to you in the hope that it can be a useful ! * and timesaving tool in analysing Data of imaging Cerenkov telescopes. ! * It is distributed WITHOUT ANY WARRANTY. ! * ! * Permission to use, copy, modify and distribute this software and its ! * documentation for any purpose is hereby granted without fee, ! * provided that the above copyright notice appear in all copies and ! * that both that copyright notice and this permission notice appear ! * in supporting documentation. It is provided "as is" without express ! * or implied warranty. ! * ! ! ! Author(s): Thomas Bretz, 1/2004 ! ! Copyright: MAGIC Software Development, 2000-2008 ! ! \* ======================================================================== */ ///////////////////////////////////////////////////////////////////////////// // // MJCalibrateSignal // // This class is reading the output written by callisto. It calibrates // signal and time. // // The signal and time extractors are read from the callisto-output. In // pricipal you could overwrite these default using the resource file, // but this is NOT recommended! // ///////////////////////////////////////////////////////////////////////////// #include "MJCalibrateSignal.h" #include #include // Core #include "MLog.h" #include "MLogManip.h" #include "MDirIter.h" #include "MTaskList.h" #include "MParList.h" #include "MEvtLoop.h" #include "MStatusDisplay.h" // General containers #include "MGeomCam.h" #include "MBadPixelsCam.h" #include "MCalibConstCam.h" #include "MPedestalCam.h" #include "MArrivalTimeCam.h" // General histograms #include "MH3.h" #include "MHCamEvent.h" #include "MHVsTime.h" // Calibration containers #include "MCalibrationQECam.h" #include "MCalibrationBlindCam.h" #include "MCalibrationChargeCam.h" #include "MCalibrationRelTimeCam.h" #include "MCalibrationChargePINDiode.h" // Calibration histograms #include "MHCalibrationChargeCam.h" #include "MHCalibrationChargeBlindCam.h" #include "MHCalibrationChargePINDiode.h" #include "MHCalibrationRelTimeCam.h" // Tasks #include "MReadMarsFile.h" #include "MRawFileRead.h" #include "MTaskEnv.h" #include "MContinue.h" #include "MFillH.h" #include "MGeomApply.h" #include "MExtractTimeAndCharge.h" #include "MTriggerPatternDecode.h" #include "MCalibrationPatternDecode.h" #include "MCalibrationChargeCalc.h" #include "MCalibrationRelTimeCalc.h" #include "MCalibCalcFromPast.h" #include "MPedestalSubtract.h" #include "MPedCalcFromLoGain.h" #include "MCalibrateData.h" #include "MExtractPINDiode.h" #include "MExtractBlindPixel.h" #include "MCalibrateRelTimes.h" #include "MBadPixelsCalc.h" #include "MBadPixelsTreat.h" #include "MWriteRootFile.h" // Filter #include "MFTriggerPattern.h" #include "MFCosmics.h" #include "MFilterList.h" #include "MFDataPhrase.h" // Classes for writing movies #include "MFEvtNumber.h" #include "MMoviePrepare.h" #include "MMovieWrite.h" #include "MImgCleanStd.h" ClassImp(MJCalibrateSignal); using namespace std; // -------------------------------------------------------------------------- // // Default constructor. // // Sets: // - fIsInterlaced to kTRUE // - fIsRelTimesUpdate to kFALSE // - fIsHiLoCalibration to kFALSE // MJCalibrateSignal::MJCalibrateSignal(const char *name, const char *title) : fExtractor(0), fIsInterlaced(kTRUE), fIsRelTimesUpdate(kTRUE), fIsMovieMode(kFALSE) { fName = name ? name : "MJCalibrateSignal"; fTitle = title ? title : "Tool to calibrate data"; } MJCalibrateSignal::~MJCalibrateSignal() { if (fExtractor) delete fExtractor; } void MJCalibrateSignal::SetExtractor(const MExtractor *ext) { if (fExtractor) delete fExtractor; fExtractor = ext ? (MExtractor*)ext->Clone() : NULL; } Bool_t MJCalibrateSignal::WriteResult() const { if (IsNoStorage() || fIsMovieMode) return kTRUE; // FIXME: This is not nice because it will update the signal // file always. Which might make the usage outside of // callisto difficult. TObjArray cont; cont.Add(const_cast(GetEnv())); cont.Add(const_cast(&fSequence)); if (fDisplay) { TString title = "-- Calibrate Signal: "; title += fSequence.GetSequence(); title += " --"; fDisplay->SetTitle(title, kFALSE); cont.Add(fDisplay); } const TString name(Form("signal%08d.root", fSequence.GetSequence())); return WriteContainer(cont, name, "UPDATE"); } Bool_t MJCalibrateSignal::ReadCalibration(TObjArray &l, MBadPixelsCam &cam, MExtractor* &ext2, MExtractor* &ext3, TString &geom) const { TString fname = Form("%s/calib%08d.root", fPathIn.Data(), fSequence.GetSequence()); *fLog << inf << "Reading from file: " << fname << endl; TFile file(fname, "READ"); if (!file.IsOpen()) { *fLog << err << dbginf << "ERROR - Could not open file " << fname << endl; return kFALSE; } TObject *o = file.Get("ExtractSignal"); if (o && !o->InheritsFrom(MExtractor::Class())) { *fLog << err << dbginf << "ERROR - ExtractSignal read from " << fname << " doesn't inherit from MExtractor!" << endl; return kFALSE; } ext3 = o ? (MExtractor*)o->Clone() : NULL; o = file.Get("ExtractTime"); if (o && !o->InheritsFrom(MExtractor::Class())) { *fLog << err << dbginf << "ERROR - ExtractTime read from " << fname << " doesn't inherit from MExtractor!" << endl; return kFALSE; } ext2 = o ? (MExtractor*)o->Clone() : NULL; if (!ext3 && !ext2) { *fLog << err << dbginf << "ERROR - Neither ExtractSignal nor ExrtractTime found in " << fname << "!" << endl; return kFALSE; } o = file.Get("MGeomCam"); if (o && !o->InheritsFrom(MGeomCam::Class())) { *fLog << err << dbginf << "ERROR - MGeomCam read from " << fname << " doesn't inherit from MGeomCam!" << endl; return kFALSE; } geom = o ? o->ClassName() : ""; TObjArray cont(l); cont.Add(&cam); return ReadContainer(cont); } // -------------------------------------------------------------------------- // // MJCalibration allows to setup several option by a resource file: // MJCalibrateSignal.RawData: yes,no // // For more details see the class description and the corresponding Getters // Bool_t MJCalibrateSignal::CheckEnvLocal() { SetInterlaced(GetEnv("Interlaced", fIsInterlaced)); SetRelTimesUpdate(GetEnv("RelTimesUpdate", fIsRelTimesUpdate)); SetMovieMode(GetEnv("MovieMode", fIsMovieMode)); return MJCalib::CheckEnvLocal(); } Bool_t MJCalibrateSignal::Process(MPedestalCam &pedcamab, MPedestalCam &pedcambias, MPedestalCam &pedcamextr) { if (!fSequence.IsValid()) { *fLog << err << "ERROR - Sequence invalid..." << endl; return kFALSE; } *fLog << inf; fLog->Separator(GetDescriptor()); *fLog << "Calculate calibrated data from Sequence #"; *fLog << fSequence.GetSequence() << endl << endl; //if (!CheckEnv()) // return kFALSE; CheckEnv(); // -------------------------------------------------------------------------------- MDirIter iter; if (fSequence.IsValid()) { if (fSequence.GetRuns(iter, MSequence::kRawDat)<=0) return kFALSE; } // Read File MHCalibrationChargeCam hchacam; MHCalibrationChargeBlindCam hbndcam; MHCalibrationChargePINDiode hpndiod; MHCalibrationRelTimeCam hrelcam; //MHCalibrationHiLoCam hilocam; //MHCalibrationPulseTimeCam hpulcam; hchacam.SetOscillations(kFALSE); hbndcam.SetOscillations(kFALSE); hrelcam.SetOscillations(kFALSE); MCalibrationChargeCam calcam; MCalibrationQECam qecam; MCalibrationBlindCam bndcam; MCalibrationChargePINDiode pind; MCalibrationRelTimeCam tmcam; //MCalibrationHiLoCam hilcam; //MCalibrationPulseTimeCam pulcam; MBadPixelsCam badpix; TObjArray interlacedcont; if (fIsInterlaced) { interlacedcont.Add(&hchacam); if (IsUseBlindPixel()) interlacedcont.Add(&hbndcam); if (IsUsePINDiode()) interlacedcont.Add(&hpndiod); if (fIsRelTimesUpdate) interlacedcont.Add(&hrelcam); } MExtractor *extractor1=fExtractor; MExtractor *extractor2=0; MExtractor *extractor3=0; TString geom; TObjArray calibcont; calibcont.Add(&calcam); calibcont.Add(&qecam); calibcont.Add(&bndcam); calibcont.Add(&tmcam); if (IsUseBlindPixel()) calibcont.Add(&bndcam); if (!ReadCalibration(calibcont, badpix, extractor2, extractor3, geom)) return kFALSE; *fLog << all; if (!geom.IsNull()) *fLog << inf << "Camera geometry found in file: " << geom << endl; else *fLog << inf << "No Camera geometry found using default " << endl; if (extractor3) { *fLog << underline << "Signal Extractor found in calibration file" << endl; extractor3->Print(); *fLog << endl; } else *fLog << inf << "No Signal Extractor: ExtractSignal in file." << endl; if (extractor1) { *fLog << underline << "Modified Signal Extractor set by user." << endl; extractor1->Print(); *fLog << endl; } else { *fLog << inf << "No modified Signal Extractor set by user... using ExtractSignal." << endl; extractor1 = extractor3 ? (MExtractor*)extractor3->Clone() : 0; } if (extractor2) { *fLog << underline << "Time Extractor found in calibration file" << endl; extractor2->Print(); *fLog << endl; } else *fLog << inf << "No Time Extractor: ExtractTime in file." << endl; // This is necessary for the case in which it is not in the files MCalibConstCam constcam; //MBadPixelsCam badcam; constcam.SetBadPixels(&badpix); // Setup Parlist MParList plist; plist.AddToList(this); // take care of fDisplay! plist.AddToList(&badpix); plist.AddToList(&constcam); //plist.AddToList(&hilcam); plist.AddToList(&calibcont); // Using AddToList(TObjArray *) plist.AddToList(&interlacedcont); // Using AddToList(TObjArray *) //plist.AddToList(&pulcam); // Setup Tasklist MTaskList tlist; plist.AddToList(&tlist); MReadMarsFile readmc("Events"); readmc.DisableAutoScheme(); MRawFileRead rawread(NULL); rawread.SetForceMode(); // Ignore broken time-stamps MRead *read = fSequence.IsMonteCarlo() ? (MRead*)&readmc : (MRead*)&rawread; read->AddFiles(iter); const TString fname(Form("%s{s/_D_/_Y_}{s/\\.raw$/.root}{s/\\.raw\\.gz$/.root}", fPathOut.Data())); // Skips MC which have no contents. This are precisely the // events which fullfilled the MC Lvl1 trigger and an // arbitrary cut (typically at 50phe) to speed up simulation MContinue contmc("MRawEvtData.GetNumPixels<0.5", "ContEmptyMC"); //MPointingPosInterpolate pextr; //pextr.AddFiles(&iter); MGeomApply apply; // Only necessary to create geometry if (!geom.IsNull()) apply.SetGeometry(geom); //MBadPixelsMerge merge(&badpix); // Make sure that pedcamab has the correct name pedcamab.SetName("MPedestalFundamental"); pedcamextr.SetName("MPedestalFromExtractorRndm"); pedcambias.SetName("MPedestalFromExtractor"); plist.AddToList(&pedcamextr); plist.AddToList(&pedcambias); plist.AddToList(&pedcamab); MArrivalTimeCam timecam; plist.AddToList(&timecam); // Check for interleaved events MCalibrationPatternDecode caldec; MTriggerPatternDecode decode; MH3 hpat("MRawRunHeader.GetFileID", "MTriggerPattern.GetUnprescaled"); if (fSequence.IsMonteCarlo()) hpat.SetWeight("100./MMcRunHeader.fNumSimulatedShowers"); else hpat.SetWeight("1./TMath::Max(MRawRunHeader.GetRunLength,1)"); hpat.SetName("TrigPat"); hpat.SetTitle("Rate of the trigger pattern [Hz];File Id;Trigger Pattern;Rate [Hz]"); hpat.InitLabels(MH3::kLabelsXY); //hpat.DefineLabelsY("1=Lvl1;2=Cal;3=Cal;4=Lvl2;5=Cal;7=Cal;8=Ped;9=Ped+Trig;13=Ped+Trig;16=Pin;32=Sum"); hpat.DefaultLabelY("UNKNOWN"); hpat.DefineLabelY( 0, "0"); // 0: No pattern hpat.DefineLabelY( 1, "Trig"); // 1: Lvl1 hpat.DefineLabelY( 2, "Cal"); // 2: Cal hpat.DefineLabelY( 3, "Cal"); // Cal+Lvl1 hpat.DefineLabelY( 4, "Trig"); // 4: Lvl2 hpat.DefineLabelY( 5, "Trig"); // Lvl2+Lvl1 hpat.DefineLabelY( 7, "Cal"); // Lvl2+Cal+Lvl hpat.DefineLabelY( 8, "Ped"); // 8: Ped hpat.DefineLabelY( 9, "Ped+Trig"); // Ped+Lvl1 hpat.DefineLabelY(10, "Ped+Cal"); // Ped+Cal hpat.DefineLabelY(12, "Ped+Trig"); // Ped+Lvl2 hpat.DefineLabelY(13, "Ped+Trig"); // Ped+Lvl2+Lvl1 hpat.DefineLabelY(16, "Pin"); // 16: Pin hpat.DefineLabelY(32, "Sum"); // 32: Sum hpat.DefineLabelY(33, "Trig"); // Sum+Lvl1 hpat.DefineLabelY(34, "Cal"); // Sum+Cal hpat.DefineLabelY(35, "Cal"); // Sum+Cal+Lvl1 hpat.DefineLabelY(36, "Trig"); // Sum+Lvl2 hpat.DefineLabelY(37, "Trig"); // Sum+Lvl1+Lvl2 hpat.DefineLabelY(39, "Cal"); // Sum+Lvl2+Cal+Lvl1 MFillH fillpat(&hpat, "", "FillPattern"); fillpat.SetDrawOption("box"); // This will make that for data with version less than 5, where // trigger patterns were not yet correct, all the events in the real // data file will be processed. In any case there are no interleaved // calibration events in such data, so this is fine. // We allow only cosmics triggered events to pass (before prescaling) MFTriggerPattern fcalped("SelectTrigEvts"); fcalped.SetInverted(); fcalped.SetDefault(kTRUE); fcalped.DenyAll(); fcalped.AllowTriggerLvl1(); fcalped.AllowTriggerLvl2(); fcalped.AllowSumTrigger(); // This will skip interleaved events with a cal- or ped-trigger MContinue contcalped(&fcalped, "ContNonTrigger"); // Create the pedestal subtracted raw-data MPedestalSubtract pedsub; pedsub.SetPedestalCam(&pedcamab); // Do signal and pedestal calculation MPedCalcFromLoGain pedlo1("MPedCalcFundamental"); pedlo1.SetPedestalUpdate(kTRUE); pedlo1.SetNamePedestalCamOut("MPedestalFundamental"); MPedCalcFromLoGain pedlo2("MPedCalcWithExtractorRndm"); pedlo2.SetPedestalUpdate(kTRUE); pedlo2.SetRandomCalculation(kTRUE); pedlo2.SetNamePedestalCamOut("MPedestalFromExtractorRndm"); MPedCalcFromLoGain pedlo3("MPedCalcWithExtractor"); pedlo3.SetPedestalUpdate(kTRUE); pedlo3.SetRandomCalculation(kFALSE); pedlo3.SetNamePedestalCamOut("MPedestalFromExtractor"); if (!extractor1) { *fLog << err << "ERROR - extractor1 == NULL" << endl; return kFALSE; } // Setup to use the hi-gain extraction window in the lo-gain // range (the start of the lo-gain range is added automatically // by MPedCalcFromLoGain) // // The window size of the extractor is not yet initialized, // so we have to stick to the extraction range // // Even if we would like to use a range comparable to the // hi-gain extraction we use the lo-gain range to make // sure that exclusions (eg. due to switching noise) // are correctly handled. // pedlo1.SetRangeFromExtractor(*extractor1); if (extractor1->InheritsFrom("MExtractTimeAndCharge")) { pedlo2.SetExtractor((MExtractTimeAndCharge*)extractor1); pedlo3.SetExtractor((MExtractTimeAndCharge*)extractor1); } else { pedlo2.SetRangeFromExtractor(*extractor1); pedlo3.SetRangeFromExtractor(*extractor1); } //------------------------------ // // this is the filter to find pedestal events. For the Siegen FADC // these are all events which are not calibration events because // the pedestal is extracted from the lo-gain signal. For MUX // data this are artifiially triggered events with the pedestal // trigger flag, and for safty without Lvl1 or Lvl2 flag) // // For the time "before" the trigger pattern all events (Siegen FADC) // can be considered to be pedestal, because this was also the time // without artifially calibration events // // Deny or allow is done before prescaling. // MFTriggerPattern fped("SelectPedestals"); fped.SetDefault(kTRUE); fped.DenyCalibration(); if (!extractor1->HasLoGain()) { fped.DenyAll(); fped.RequirePedestal(); } //------------------------------ // // Apply a filter against cosmics (this is to make sure that the // trigger system was working properly and no empty events survive) // For every event 5% of the pixel must not be empty. In PostProcess // an error is raised if more than 50% of the events were skipped. // MFCosmics fcosmicscal; fcosmicscal.SetNamePedestalCam("MPedestalFundamental"); //CORRECT? fcosmicscal.SetMaxEmptyPixels(0.05); fcosmicscal.SetMaxAcceptedFraction(0.5); MContinue contcoscal(&fcosmicscal, "ContCosmicsCal"); //------------------------------ /* MFCosmics fcosmicsped; // Def=20% empty pixels fcosmicsped.SetNamePedestalCam("MPedestalFundamental"); //CORRECT? MContinue contcosped(&fcosmicsped, "ContCosmicsPed"); contcosped.SetInverted(); */ //------------------------------ // // Thie signal extractors // MTaskEnv taskenv1("ExtractSignal"); MTaskEnv taskenv2("ExtractTime"); MTaskEnv taskenv3("ExtractInterlaced"); taskenv1.SetDefault(extractor1); taskenv2.SetDefault(extractor2); taskenv3.SetDefault(extractor3); // // This is new calibration to photo-electrons, hard-coded // as decided at the Wuerzburg software meeting 26.01.05 // MCalibrateData calib; calib.SetSignalType(MCalibrateData::kPhe); //calib.AddPedestal("Fundamental"); calib.AddPedestal("FromExtractor"); calib.AddPedestal("FromExtractorRndm"); calib.SetPedestalFlag(MCalibrateData::kEvent); //---------------------------------------------------------- MExtractPINDiode pinext; MExtractBlindPixel bldext; // Execute for all events with the calibration trigger. If no // trigger pattern is available do not execute it // The selection is done before prescaling. MFTriggerPattern fcalib("SelectCalEvts"); fcalib.SetDefault(kFALSE); fcalib.DenyAll(); fcalib.RequireCalibration(); fcalib.AllowTriggerLvl1(); fcalib.AllowTriggerLvl2(); fcalib.AllowSumTrigger(); MCalibrationChargeCalc chcalc; chcalc.SetContinousCalibration(); chcalc.SetExtractor(extractor3); MCalibrationRelTimeCalc recalc; MCalibCalcFromPast pacalc; chcalc.SetPedestals(&pedcamextr); pacalc.SetChargeCalc(&chcalc); if (fIsRelTimesUpdate) pacalc.SetRelTimeCalc(&recalc); pacalc.SetCalibrate(&calib); // // Calibration histogramming // MFillH filpin(&hpndiod, "MExtractedSignalPINDiode", "FillPINDiode"); MFillH filbnd(&hbndcam, "MExtractedSignalBlindPixel", "FillBlindCam"); MFillH filcam(&hchacam, "MExtractedSignalCam", "FillChargeCam"); MFillH filtme(&hrelcam, "MArrivalTimeCam", "FillRelTime"); //MFillH filhil(&hilocam, "MExtractedSignalCam", "FillHiLoRatio"); //MFillH filpul(&hpulcam, "MRawEvtData", "FillPulseTime"); filpin.SetBit(MFillH::kDoNotDisplay); filbnd.SetBit(MFillH::kDoNotDisplay); filcam.SetBit(MFillH::kDoNotDisplay); filtme.SetBit(MFillH::kDoNotDisplay); //filhil.SetBit(MFillH::kDoNotDisplay); //filpul.SetBit(MFillH::kDoNotDisplay); MCalibrateRelTimes caltm; MBadPixelsCalc bpcal; MBadPixelsTreat treat; //bpcal.SetNamePedPhotCam("MPedPhotFromExtractor"); bpcal.SetNamePedPhotCam("MPedPhotFromExtractorRndm"); //treat.AddNamePedPhotCam("MPedPhotFundamental"); treat.AddNamePedPhotCam("MPedPhotFromExtractor"); treat.AddNamePedPhotCam("MPedPhotFromExtractorRndm"); if (!extractor2 && !extractor1->InheritsFrom("MExtractTimeAndCharge")) treat.SetProcessTimes(kFALSE); MHCamEvent evt0( 0, "PedFLG", "Fundamental Pedestal from Lo Gain;;P [cnts/sl]"); MHCamEvent evt1( 2, "PedRmsFLG", "RMS from Extractor applied to ped.;;\\sigma_{p} [cnts/sl]"); MHCamEvent evt2( 0, "Extra'd", "Extracted Signal;;S [cnts/sl]"); // MHCamEvent evt3(4, "PedPhot", "Calibrated Pedestal;;P [phe]"); MHCamEvent evt4( 5, "PedRMS", "Calibrated RMS from Extractor applied to ped.;;\\sigma_{p} [phe]"); MHCamEvent evt5( 0, "Interp'd", "Interpolated Signal scaled with A/A_{0};;S [phe]"); MHCamEvent evt6(102, "Unsuitable", "Fraction of unsuitable events per Pixel;;[1]"); // MHCamEvent evt7( 6, "Times", "Calibrated Arrival Time;;T [fadc sl]"); MHCamEvent evt8( 0, "Conv", "Calibration Conv. Factors;;[phe/cnts]"); MHCamEvent evt9( 7, "PulsePos", "Pulse Position of cosmics (>50phe);;T [ns]"); MHCamEvent evtR( 4, "HiLoCal", "Hi-/Lo-Gain ratio;;Ratio"); MHCamEvent evtO( 7, "HiLoOff", "Lo-/Hi-Gain Offset;;Offset"); MHCamEvent evtC( 4, "CalPos", "Extracted pulse position of calibration pulses;;T [sl]"); //MHCamEvent evt2(0, "Extra'd", "Extracted Calibration Signal;;S [cnts/sl]"); evt2.SetErrorSpread(kFALSE); evt5.SetErrorSpread(kFALSE); evt6.SetErrorSpread(kFALSE); evt6.SetThreshold(); MFillH fill0(&evt0, "MPedestalFundamental", "FillPedFLG"); MFillH fill1(&evt1, "MPedestalFromExtractorRndm", "FillPedRmsFLG"); MFillH fill2(&evt2, "MExtractedSignalCam", "FillExtracted"); // MFillH fill3(&evt3, "MPedPhotFundamental", "FillPedPhot"); MFillH fill4(&evt4, "MPedPhotFromExtractorRndm", "FillPedRMS"); MFillH fill5(&evt5, "MSignalCam", "FillInterpolated"); MFillH fill6(&evt6, "MBadPixelsCam", "FillUnsuitable"); // MFillH fill7(&evt7, "MSignalCam", "FillTimes"); MFillH fill8(&evt8, "MCalibConstCam", "FillConv"); MFillH fill9(&evt9, "MSignalCam", "FillPulsePos"); MFillH fillR(&evtR, "MExtractedSignalCam", "FillHiLoCal"); MFillH fillO(&evtO, "MArrivalTimeCam", "FillHiLoOff"); MFillH fillC(&evtC, "MArrivalTimeCam", "FillCalPos"); //MFillH fill2(&evt2, "MExtractedSignalCam", "FillExtractedSignal"); MHVsTime histbp("MBadPixelsCam.GetNumUnsuitable"); histbp.SetName("BadPixTm"); histbp.SetTitle("Number of unsuitable pixels;;N"); histbp.SetMinimum(0); MHVsTime histdp("MSignalCam.GetNumPixelsUnmapped"); histdp.SetName("DeadPixTm"); histdp.SetTitle("Number of dead/unmapped pixels;;N"); histdp.SetMinimum(0); // Task to fill the histogram MFillH fillB(&histbp, "MTime", "FillBadPixTm"); MFillH fillD(&histdp, "MTime", "FillDeadPixTm"); fillB.SetNameTab("BadPixTm"); fillD.SetNameTab("DeadPixTm"); /* MFillH fillP("MHPulseShape", "", "FillPulseShape"); fillP.SetNameTab("Pulse"); */ /* MHVsTime hbadpix("MBadPixelsCam.GetNumUnsuitable"); hbadpix.SetNumEvents(50); MFillH fillB(&hbadpix, "MTime"); */ MTaskEnv fillflorian("FinalFantasy"); fillflorian.SetDefault(); // The second rule is for the case reading raw-files! MWriteRootFile write(2, fname, fOverwrite?"RECREATE":"NEW"); // Run Header write.AddContainer("MRawRunHeader", "RunHeaders"); // write.AddContainer("MBadPixelsCam", "RunHeaders"); write.AddContainer("MGeomCam", "RunHeaders"); // Monte Carlo Headers write.AddContainer("MMcRunHeader", "RunHeaders", kFALSE); write.AddContainer("MMcFadcHeader", "RunHeaders", kFALSE); write.AddContainer("MMcTrigHeader", "RunHeaders", kFALSE); write.AddContainer("MMcConfigRunHeader", "RunHeaders", kFALSE); write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE); // Monte Carlo write.AddContainer("MMcEvt", "Events", kFALSE); write.AddContainer("MMcTrig", "Events", kFALSE); // Data tree write.AddContainer("MSignalCam", "Events"); // write.AddContainer("MPedPhotFundamental", "Events"); write.AddContainer("MPedPhotFromExtractor", "Events"); write.AddContainer("MPedPhotFromExtractorRndm", "Events"); write.AddContainer("MTime", "Events", kFALSE); write.AddContainer("MRawEvtHeader", "Events"); write.AddContainer("MTriggerPattern", "Events"); // Trees with slow-control information (obsolete // if we don't read merpped root-files) write.AddTree("Trigger", kFALSE); write.AddTree("Drive", kFALSE); write.AddTree("CC", kFALSE); write.AddTree("Pyrometer", kFALSE); write.AddTree("Currents", kFALSE); write.AddTree("Camera", kFALSE); // Slow-Control: Current-tree write.AddContainer("MCameraDC", "Currents", kFALSE); // Slow-Control: Camera-tree write.AddContainer("MCameraAUX", "Camera", kFALSE); write.AddContainer("MCameraCalibration", "Camera", kFALSE); write.AddContainer("MCameraCooling", "Camera", kFALSE); write.AddContainer("MCameraHV", "Camera", kFALSE); write.AddContainer("MCameraLV", "Camera", kFALSE); write.AddContainer("MCameraLids", "Camera", kFALSE); // Write the special MC tree MWriteRootFile writemc(2, fname, fOverwrite?"RECREATE":"NEW"); writemc.SetName("WriteMC"); writemc.AddContainer("MMcEvtBasic", "OriginalMC"); // Write the special calib tree /* MWriteRootFile writecal(2, fname, fOverwrite?"RECREATE":"NEW"); writecal.SetName("WriteCalib"); writecal.AddContainer("MBadPixelsCam", "Calib"); writecal.AddContainer("MCalibrationChargeCam", "Calib"); writecal.AddContainer("MCalibrationRelTimeCam", "Calib"); */ //----------------------------------------------------------- // Build tasklist MTaskList tlist2("PedEvents"); tlist2.AddToList(&caldec); tlist2.AddToList(&decode); tlist2.AddToList(&fillpat); tlist2.AddToList(&apply); //tlist2.AddToList(&merge); tlist2.AddToList(&pedsub); //----------------------------------------------------------- // Pedestal extraction MTaskList tlist3("CalEvents"); tlist3.SetFilter(&fped); // Deny events with cal-trigger tlist2.AddToList(&fped); // If no lo-gain require ped-trigger tlist2.AddToList(&tlist3); // and deny cosmics (lvl1/2) trigger tlist3.AddToList(&pedlo1); // extract pedestal events tlist3.AddToList(&pedlo2); // extract pedestal events tlist3.AddToList(&pedlo3); // extract pedestal events tlist3.AddToList(&fill0); // fill pedestal events tlist3.AddToList(&fill1); // fill pedestal events //----------------------------------------------------------- // Calibration MTaskList tlist4; tlist4.SetFilter(&fcalib); // process only events with cal-trigger //MFDataPhrase filcalco("MCalibrationConstCam.IsReadyToSave>0.5", "CalibConstFilter"); if (fIsInterlaced) { // The task list is executed for all events with the calibration // trigger tlist2.AddToList(&fcalib); // MFTriggerPattern tlist2.AddToList(&tlist4); tlist4.AddToList(&taskenv3); tlist4.AddToList(&contcoscal); // MContinue/ContCosmicsCal if (IsUsePINDiode()) tlist4.AddToList(&pinext); // MExtractPINDiode if (IsUseBlindPixel()) tlist4.AddToList(&bldext); // MExtractBlindPixel tlist4.AddToList(&pacalc); // MCalibCalcFromPast /* tlist3.AddToList(&filcalco); // CalibConstFilter (IsReadyToSave) fill8.SetFilter(&filcalco); tlist3.AddToList(&fill8); // FillConvUpd */ tlist4.AddToList(&filcam); // FillChargeCam if (fIsRelTimesUpdate) tlist4.AddToList(&filtme); // FillRelTime if (IsUseBlindPixel()) tlist4.AddToList(&filbnd); // FillBlindCam if (IsUsePINDiode()) tlist4.AddToList(&filpin); // FillPINDiode tlist4.AddToList(&chcalc); // MCalibrationChargeCalc if (fIsRelTimesUpdate) tlist4.AddToList(&recalc); // MCalibrationRelTimeCam tlist4.AddToList(&fillC); // FillCalPos //tlist3.AddToList(&writecal); // MWriteRootFile } //----------------------------------------------------------- // Cosmics extraction // remove all events with a cal- or ped-trigger (no matter // whether they have lvl1 or lvl2 or any other flag tlist2.AddToList(&contcalped); // Extract the signal if (extractor1) tlist2.AddToList(&taskenv1); // remove all events which definitly don't have a signal // using MFCosmics (ContCosmicsPed) // tlist2.AddToList(&contcosped); // Extract arrival time (if a dedicated extrator given) if (extractor2) tlist2.AddToList(&taskenv2); /* if (fIsHiLoCalibration) { plist.AddToList(&hilocam); tlist2.AddToList(&filhil); } if (fIsPulsePosCheck) { plist.AddToList(&hpulcam); tlist2.AddToList(&filpul); } */ tlist2.AddToList(&fill2); tlist2.AddToList(&fill8); // FillConv tlist2.AddToList(&calib); // MCalibrateData if (extractor2 || extractor1->InheritsFrom("MExtractTimeAndCharge")) tlist2.AddToList(&caltm); tlist2.AddToList(&bpcal); // MBadPixelsCalc tlist2.AddToList(&treat); // MBadPixelsTreat tlist2.AddToList(&fill6); // tlist2.AddToList(&fill3); tlist2.AddToList(&fill4); tlist2.AddToList(&fill5); //if (extractor2 || extractor1->InheritsFrom("MExtractTimeAndCharge")) // tlist2.AddToList(&fill7); tlist2.AddToList(&fill9); if (!fSequence.IsMonteCarlo()) { tlist2.AddToList(&fillB); tlist2.AddToList(&fillD); } if (extractor1->HasLoGain()) { tlist2.AddToList(&fillR); tlist2.AddToList(&fillO); } /* MFillH fillC("MHCleaning", "", "FillClean"); tlist2.AddToList(&fillC); //tlist2.AddToList(&fillP); */ // ----- Start: Code for encoding movies ----- MMoviePrepare movprep; MMovieWrite movwrite; movprep.SetRangeFromExtractor(*extractor1); //MFDataPhrase movfilt("MMovieData.fMax>150"); MFDataPhrase movfilt("MMovieData.fMax>5*MMovieData.fMedianPedestalRms", "MovieFilter"); MImgCleanStd movclean(8.5, 4.0); movclean.SetMethod(MImgCleanStd::kAbsolute); //movprep.SetFilter(&evtnum); movclean.SetFilter(&movfilt); movwrite.SetFilter(&movfilt); MTaskList tlistmov("MovieEncoder"); tlistmov.AddToList(&movprep); tlistmov.AddToList(&movfilt); tlistmov.AddToList(&movclean); tlistmov.AddToList(&movwrite); MFEvtNumber evtnum; //evtnum.SetSelector("ThetaSquared.fVal<0.04"); //evtnum.SetFileName("ganymed00000001.root"); tlistmov.SetFilter(&evtnum); if (fIsMovieMode) { tlist2.AddToList(&evtnum); tlist2.AddToList(&tlistmov); } // ----- End: Code for encoding movies ----- tlist2.AddToList(&fillflorian); // Setup List for Drive-tree //MPointingPosCalc pcalc; // Now setup main tasklist tlist.AddToList(read); if (fSequence.IsMonteCarlo()) { if (!fIsMovieMode && !HasNullOut()) tlist.AddToList(&writemc); tlist.AddToList(&contmc); } //if (IsUseRootData()) // tlist2.AddToList(&pextr); tlist.AddToList(&tlist2, fSequence.IsMonteCarlo() ? "Events" : "All"); //if (fSequence.IsMonteCarlo()) // tlist.AddToList(&pcalc, "Drive"); if (!fIsMovieMode && !HasNullOut()) tlist.AddToList(&write); // Create and setup the eventloop MEvtLoop evtloop(fName); evtloop.SetParList(&plist); evtloop.SetDisplay(fDisplay); evtloop.SetLogStream(fLog); if (!SetupEnv(evtloop)) return kFALSE; // Execute first analysis const Bool_t rc = evtloop.Eventloop(fMaxEvents); // make sure owned object are deleted if (extractor1 && extractor1!=fExtractor) delete extractor1; if (extractor2) delete extractor2; if (extractor3) delete extractor3; // return if job failed if (!rc) { *fLog << err << GetDescriptor() << ": Failed." << endl; return kFALSE; } // if everything went ok write and display result DisplayResult(plist); /* if (fIsPixelCheck) { if (fIsPulsePosCheck) hpulcam[fCheckedPixId].DrawClone(""); //if (fIsHiLoCalibration) // hilocam[fCheckedPixId].DrawClone(""); } interlacedcont.Add(&pulcam); */ //if (fIsHiLoCalibration) // interlacedcont.Add(&hilcam); //if (fIsPulsePosCheck) // interlacedcont.Add(plist.FindObject("MHCalibrationPulseTimeCam")); //if (fIsHiLoCalibration) // interlacedcont.Add(plist.FindObject("MHCalibrationHiLoCam")); if (!WriteResult()) return kFALSE; // return if job went ok *fLog << all << GetDescriptor() << ": Done." << endl; *fLog << endl << endl; return kTRUE; } void MJCalibrateSignal::DisplayResult(MParList &plist) { /* if (!fDisplay || !fIsHiLoCalibration) return; MCalibrationHiLoCam *hcam = (MCalibrationHiLoCam*)plist.FindObject("MCalibrationHiLoCam"); MGeomCam *geom = (MGeomCam*)plist.FindObject("MGeomCam"); if (!hcam || !geom) return; // Create histograms to display MHCamera disp1(*geom, "HiLoConv", "Ratio Amplification HiGain vs. LoGain (Charges)"); MHCamera disp2(*geom, "HiLoDiff", "Arrival Time Diff. HiGain vs. LoGain (Times)"); disp1.SetCamContent(*hcam, 0); disp1.SetCamError( *hcam, 1); disp2.SetCamContent(*hcam, 5); disp2.SetCamError( *hcam, 6); disp1.SetYTitle("R [1]"); disp2.SetYTitle("\\Delta T [FADC sl.]"); TCanvas &c1 = fDisplay->AddTab("HiLoConv"); c1.Divide(2,3); disp1.CamDraw(c1, 1, 2, 1); disp2.CamDraw(c1, 2, 2, 1); */ }