Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJCalibrateSignal.cc@ 7072

Visit:

Last change on this file since 7072 was 7072, checked in by tbretz, 19 years ago
* empty log message *
File size: 27.7 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
19	!
20	! Copyright: MAGIC Software Development, 2000-2004
21	!
22	!
23	\* ======================================================================== */
24
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJCalibrateSignal
28	//
29	// This class is reading the output written by callisto. It calibrates
30	// signal and time.
31	//
32	// The signal and time extractors are read from the callisto-output. In
33	// pricipal you could overwrite these default using the resource file,
34	// but this is NOT recommended!
35	//
36	/////////////////////////////////////////////////////////////////////////////
37	#include "MJCalibrateSignal.h"
38
39	#include <TEnv.h>
40	#include <TFile.h>
41
42	#include "MLog.h"
43	#include "MLogManip.h"
44
45	#include "MDirIter.h"
46	#include "MRunIter.h"
47	#include "MParList.h"
48	#include "MTaskList.h"
49	#include "MEvtLoop.h"
50
51	#include "MStatusDisplay.h"
52
53	#include "MGeomCam.h"
54	#include "MHCamEvent.h"
55	//#include "MHCamEventTH.h"
56	#include "MPedestalCam.h"
57	#include "MBadPixelsCam.h"
58	#include "MArrivalTimeCam.h"
59
60	#include "MCalibrationQECam.h"
61	#include "MCalibrationBlindCam.h"
62	#include "MCalibrationChargeCam.h"
63	#include "MCalibrationRelTimeCam.h"
64	#include "MCalibrationChargePINDiode.h"
65	#include "MCalibrationHiLoCam.h"
66	#include "MCalibrationPulseTimeCam.h"
67	#include "MCalibrationPatternDecode.h"
68
69	#include "MCalibrationChargeCalc.h"
70	#include "MCalibrationRelTimeCalc.h"
71
72	#include "MCalibrationIntensityChargeCam.h"
73	#include "MCalibrationIntensityBlindCam.h"
74	#include "MCalibrationIntensityRelTimeCam.h"
75	#include "MCalibrationIntensityQECam.h"
76	#include "MBadPixelsIntensityCam.h"
77
78	#include "MHCalibrationChargeCam.h"
79	#include "MHCalibrationChargeBlindCam.h"
80	#include "MHCalibrationChargePINDiode.h"
81	#include "MHCalibrationRelTimeCam.h"
82	#include "MHCalibrationPulseTimeCam.h"
83	#include "MHCalibrationHiLoCam.h"
84	#include "MHCamera.h"
85
86	#include "MCalibCalcFromPast.h"
87
88	#include "MReadReports.h"
89	#include "MReadMarsFile.h"
90	#include "MRawFileRead.h"
91	#include "MContinue.h"
92	#include "MTriggerPatternDecode.h"
93	#include "MFTriggerPattern.h"
94	#include "MGeomApply.h"
95	//#include "MMcPedestalCopy.h"
96	#include "MPointingPosCalc.h"
97	#include "MPointingPosInterpolate.h"
98	#include "MPedCalcFromLoGain.h"
99	#include "MExtractor.h"
100	#include "MExtractTimeAndCharge.h"
101	#include "MExtractPINDiode.h"
102	#include "MExtractBlindPixel.h"
103	#include "MFCosmics.h"
104	#include "MTaskEnv.h"
105	#include "MCalibrateData.h"
106	#include "MCalibrateRelTimes.h"
107	#include "MBadPixelsMerge.h"
108	#include "MBadPixelsCalc.h"
109	#include "MBadPixelsTreat.h"
110	#include "MFillH.h"
111	#include "MWriteRootFile.h"
112
113	ClassImp(MJCalibrateSignal);
114
115	using namespace std;
116
117	// --------------------------------------------------------------------------
118	//
119	// Default constructor.
120	//
121	// Sets:
122	// - fIsInterlaced to kTRUE
123	// - fIsRelTimesUpdate to kFALSE
124	// - fIsHiLoCalibration to kFALSE
125	// - fPulsePosCheck to kTRUE
126	//
127	MJCalibrateSignal::MJCalibrateSignal(const char name, const char title)
128	: fExtractor(0), fIsInterlaced(kTRUE), fIsRelTimesUpdate(kFALSE)
129	{
130	fName = name ? name : "MJCalibrateSignal";
131	fTitle = title ? title : "Tool to calibrate data";
132
133	SetPulsePosCheck();
134	//fCruns = NULL;
135	}
136
137	MJCalibrateSignal::~MJCalibrateSignal()
138	{
139	if (fExtractor)
140	delete fExtractor;
141	}
142
143	void MJCalibrateSignal::SetExtractor(const MExtractor *ext)
144	{
145	if (fExtractor)
146	delete fExtractor;
147
148	fExtractor = ext ? (MExtractor*)ext->Clone() : NULL;
149	}
150
151	Bool_t MJCalibrateSignal::WriteResult(TObjArray &cont)
152	{
153	if (IsNoStorage())
154	return kTRUE;
155
156	const TString name(Form("signal%08d.root", fSequence.GetSequence()));
157	return WriteContainer(cont, name);
158	}
159
160	Bool_t MJCalibrateSignal::ReadCalibration(TObjArray &l, MBadPixelsCam &cam, MExtractor* &ext2, MExtractor* &ext3, TString &geom) const
161	{
162	TString fname = Form("%s/calib%08d.root", fPathIn.Data(), fSequence.GetSequence());
163
164	*fLog << inf << "Reading from file: " << fname << endl;
165
166	TFile file(fname, "READ");
167	if (!file.IsOpen())
168	{
169	*fLog << err << dbginf << "ERROR - Could not open file " << fname << endl;
170	return kFALSE;
171	}
172
173	TObject *o = file.Get("ExtractSignal");
174	if (o && !o->InheritsFrom(MExtractor::Class()))
175	{
176	*fLog << err << dbginf << "ERROR - ExtractSignal read from " << fname << " doesn't inherit from MExtractor!" << endl;
177	return kFALSE;
178	}
179	ext3 = o ? (MExtractor*)o->Clone() : NULL;
180
181	o = file.Get("ExtractTime");
182	if (o && !o->InheritsFrom(MExtractor::Class()))
183	{
184	*fLog << err << dbginf << "ERROR - ExtractTime read from " << fname << " doesn't inherit from MExtractor!" << endl;
185	return kFALSE;
186	}
187	ext2 = o ? (MExtractor*)o->Clone() : NULL;
188	if (!ext3 && !ext2)
189	{
190	*fLog << err << dbginf << "ERROR - Neither ExtractSignal nor ExrtractTime found in " << fname << "!" << endl;
191	return kFALSE;
192	}
193
194	o = file.Get("MGeomCam");
195	if (o && !o->InheritsFrom(MGeomCam::Class()))
196	{
197	*fLog << err << dbginf << "ERROR - MGeomCam read from " << fname << " doesn't inherit from MGeomCam!" << endl;
198	return kFALSE;
199	}
200	geom = o ? o->ClassName() : "";
201
202	TObjArray cont(l);
203	cont.Add(&cam);
204	return ReadContainer(cont);
205	}
206	/*
207	Bool_t MJCalibrateSignal::ReadExtractorCosmics(MExtractor* &ext1) const
208	{
209
210	const TString fname = Form("pedy%08d.root",fSequence.GetSequence());
211
212	*fLog << inf << "Reading from file: " << fname << endl;
213
214	TFile file(fname, "READ");
215	if (!file.IsOpen())
216	{
217	*fLog << warn << "Could not find or open file " << fname << endl;
218	return kFALSE;
219	}
220
221	TObject *o = file.Get("ExtractSignal");
222	if (o && !o->InheritsFrom(MExtractor::Class()))
223	{
224	*fLog << err << dbginf << "ERROR - ExtractSignal read from " << fname << " doesn't inherit from MExtractor!" << endl;
225	return kFALSE;
226	}
227	if (o)
228	{
229	delete ext1;
230	ext1 = (MExtractor*)o->Clone();
231	}
232	else
233	*fLog << warn << "No signal extractor found in " << fname << endl;
234
235	file.Close();
236	return kTRUE;
237	}
238	*/
239	// --------------------------------------------------------------------------
240	//
241	// MJCalibration allows to setup several option by a resource file:
242	// MJCalibrateSignal.RawData: yes,no
243	//
244	// For more details see the class description and the corresponding Getters
245	//
246	Bool_t MJCalibrateSignal::CheckEnvLocal()
247	{
248	SetInterlaced(GetEnv("Interlaced", fIsInterlaced));
249	SetRelTimesUpdate(GetEnv("RelTimesUpdate", fIsRelTimesUpdate));
250
251	return MJCalib::CheckEnvLocal();
252	}
253
254	Bool_t MJCalibrateSignal::Process(MPedestalCam &pedcamab, MPedestalCam &pedcambias,
255	MPedestalCam &pedcamextr)
256	{
257	if (!fSequence.IsValid())
258	{
259	*fLog << err << "ERROR - Sequence invalid..." << endl;
260	return kFALSE;
261	}
262
263	*fLog << inf;
264	fLog->Separator(GetDescriptor());
265	*fLog << "Calculate calibrated data from Sequence #";
266	*fLog << fSequence.GetSequence() << endl << endl;
267
268
269	//if (!CheckEnv())
270	// return kFALSE;
271
272	CheckEnv();
273
274	// --------------------------------------------------------------------------------
275
276	MDirIter iter;
277	if (fSequence.IsValid())
278	{
279	const Int_t n0 = fSequence.SetupDatRuns(iter, fPathData, IsUseRawData());
280	const Int_t n1 = fSequence.GetNumDatRuns();
281	if (n0==0)
282	{
283	*fLog << err << "ERROR - No input files of sequence found!" << endl;
284	return kFALSE;
285	}
286	if (n0!=n1)
287	{
288	*fLog << err << "ERROR - Number of files found (" << n0 << ") doesn't match number of files in sequence (" << n1 << ")" << endl;
289	if (fLog->GetDebugLevel()>4)
290	{
291	*fLog << dbg << "Files which are searched:" << endl;
292	iter.Print();
293	}
294	return kFALSE;
295	}
296	}
297
298	// Read File
299	MCalibrationIntensityChargeCam ichcam;
300	MCalibrationIntensityQECam iqecam;
301	MCalibrationIntensityBlindCam iblcam;
302	MCalibrationIntensityRelTimeCam itmcam;
303	MBadPixelsIntensityCam ibdcam;
304
305	MHCalibrationChargeCam hchacam;
306	MHCalibrationChargeBlindCam hbndcam;
307	MHCalibrationChargePINDiode hpndiod;
308	MHCalibrationRelTimeCam hrelcam;
309	MHCalibrationHiLoCam hilocam;
310	MHCalibrationPulseTimeCam hpulcam;
311
312	hchacam.SetOscillations(kFALSE);
313	hbndcam.SetOscillations(kFALSE);
314	hrelcam.SetOscillations(kFALSE);
315
316	MCalibrationChargeCam calcam;
317	MCalibrationQECam qecam;
318	MCalibrationBlindCam bndcam;
319	MCalibrationChargePINDiode pind;
320	MCalibrationRelTimeCam tmcam;
321	MCalibrationHiLoCam hilcam;
322	MCalibrationPulseTimeCam pulcam;
323
324	MBadPixelsCam badpix;
325
326	TObjArray interlacedcont;
327	if (fIsInterlaced)
328	{
329	interlacedcont.Add(&ichcam);
330	interlacedcont.Add(&iqecam);
331	interlacedcont.Add(&iblcam);
332	interlacedcont.Add(&itmcam);
333	interlacedcont.Add(&ibdcam);
334	interlacedcont.Add(&hchacam);
335	if (IsUseBlindPixel())
336	interlacedcont.Add(&hbndcam);
337	if (IsUsePINDiode())
338	interlacedcont.Add(&hpndiod);
339	if (fIsRelTimesUpdate)
340	interlacedcont.Add(&hrelcam);
341	}
342
343	MExtractor *extractor1=fExtractor;
344	MExtractor *extractor2=0;
345	MExtractor *extractor3=0;
346	TString geom;
347
348	TObjArray calibcont;
349	calibcont.Add(&calcam);
350	calibcont.Add(&qecam);
351	calibcont.Add(&bndcam);
352	calibcont.Add(&pind);
353	calibcont.Add(&tmcam);
354
355	if (!ReadCalibration(calibcont, badpix, extractor2, extractor3, geom))
356	return kFALSE;
357
358	*fLog << all;
359	if (!geom.IsNull())
360	*fLog << inf << "Camera geometry found in file: " << geom << endl;
361	else
362	*fLog << inf << "No Camera geometry found using default <MGeomCamMagic>" << endl;
363
364	if (extractor3)
365	{
366	*fLog << underline << "Signal Extractor found in calibration file" << endl;
367	extractor3->Print();
368	*fLog << endl;
369	}
370	else
371	*fLog << inf << "No Signal Extractor: ExtractSignal in file." << endl;
372
373
374	if (extractor1)
375	{
376	*fLog << underline << "Modified Signal Extractor set by user." << endl;
377	extractor1->Print();
378	*fLog << endl;
379	}
380	else
381	{
382	*fLog << inf << "No modified Signal Extractor set by user... using ExtractSignal." << endl;
383	extractor1 = extractor3 ? (MExtractor*)extractor3->Clone() : 0;
384	}
385
386	if (extractor2)
387	{
388	*fLog << underline << "Time Extractor found in calibration file" << endl;
389	extractor2->Print();
390	*fLog << endl;
391	}
392	else
393	*fLog << inf << "No Time Extractor: ExtractTime in file." << endl;
394
395	// This is necessary for the case in which it is not in the files
396	MBadPixelsCam badcam;
397
398	// Setup Parlist
399	MParList plist;
400	plist.AddToList(this); // take care of fDisplay!
401	plist.AddToList(&badcam);
402	plist.AddToList(&hilcam);
403	plist.AddToList(&calibcont); // Using AddToList(TObjArray *)
404	plist.AddToList(&interlacedcont); // Using AddToList(TObjArray *)
405	plist.AddToList(&pulcam);
406
407	// Setup Tasklist
408	MTaskList tlist;
409	plist.AddToList(&tlist);
410
411	MReadReports readreal;
412	readreal.AddTree("Events", "MTime.", kTRUE);
413	readreal.AddTree("Trigger");
414	readreal.AddTree("Camera");
415	readreal.AddTree("Drive");
416	readreal.AddTree("CC");
417	readreal.AddTree("Currents");
418
419	MReadMarsFile readmc("Events");
420	readmc.DisableAutoScheme();
421
422	MRawFileRead rawread(NULL);
423
424	MRead *read = 0;
425	switch (GetDataFlag())
426	{
427	case kIsUseRawData: read = &rawread; break;
428	case kIsUseMC: read = &readmc; break;
429	case kIsUseRootData: read = &readreal; break;
430	}
431	read->AddFiles(iter);
432
433	const TString fname(Form("%s{s/_D_/_Y_}{s/.raw$/.root}", fPathOut.Data()));
434
435
436	// Skips MC which have no contents. This are precisely the
437	// events which fullfilled the MC Lvl1 trigger and an
438	// arbitrary cut (typically at 50phe) to speed up simulation
439	MContinue contmc("MRawEvtData.GetNumPixels<0.5", "ContEmptyMC");
440
441	MPointingPosInterpolate pextr;
442	pextr.AddFiles(&iter);
443
444	MGeomApply apply; // Only necessary to create geometry
445	if (!geom.IsNull())
446	apply.SetGeometry(geom);
447	MBadPixelsMerge merge(&badpix);
448
449	// Make sure that pedcamab has the correct name
450	pedcamab.SetName("MPedestalFundamental");
451	pedcamextr.SetName("MPedestalFromExtractorRndm");
452	pedcambias.SetName("MPedestalFromExtractor");
453	plist.AddToList(&pedcamextr);
454	plist.AddToList(&pedcambias);
455	plist.AddToList(&pedcamab);
456
457	MArrivalTimeCam timecam;
458	plist.AddToList(&timecam);
459
460	// Check for interleaved events
461	MCalibrationPatternDecode caldec;
462	MTriggerPatternDecode decode;
463
464	// This will make that for data with version less than 5, where
465	// trigger patterns were not yet correct, all the events in the real
466	// data file will be processed. In any case there are no interleaved
467	// calibration events in such data, so this is fine.
468	MFTriggerPattern ftp;
469	ftp.SetDefault(kTRUE);
470	// ftp.RequireCalibration();
471	ftp.DenyCalibration();
472	ftp.DenyPedestal();
473	// ftp.DenyPinDiode();
474	ftp.SetInverted();
475
476	// This will skip interleaved calibration events and pedestal events (if any)
477	// --> tlist2
478	MContinue conttp(&ftp, "ContTrigPattern");
479
480	// Do signal and pedestal calculation
481	MPedCalcFromLoGain pedlo1("MPedCalcFundamental");
482	pedlo1.SetPedestalUpdate(kTRUE);
483	pedlo1.SetNamePedestalCamOut("MPedestalFundamental");
484
485	MPedCalcFromLoGain pedlo2("MPedCalcWithExtractorRndm");
486	pedlo2.SetPedestalUpdate(kTRUE);
487	pedlo2.SetRandomCalculation(kTRUE);
488	pedlo2.SetNamePedestalCamIn("MPedestalFundamental");
489	pedlo2.SetNamePedestalCamOut("MPedestalFromExtractorRndm");
490
491	MPedCalcFromLoGain pedlo3("MPedCalcWithExtractor");
492	pedlo3.SetPedestalUpdate(kTRUE);
493	pedlo3.SetRandomCalculation(kFALSE);
494	pedlo3.SetNamePedestalCamIn("MPedestalFundamental");
495	pedlo3.SetNamePedestalCamOut("MPedestalFromExtractor");
496
497	if (extractor1)
498	{
499	extractor1->SetPedestals(&pedcamab);
500
501	if (extractor1->InheritsFrom("MExtractTimeAndCharge"))
502	{
503	pedlo2.SetExtractor((MExtractTimeAndCharge*)extractor1);
504	pedlo3.SetExtractor((MExtractTimeAndCharge*)extractor1);
505	const Int_t win = ((MExtractTimeAndCharge*)extractor1)->GetWindowSizeHiGain();
506	pedlo1.SetExtractWindow(15, win);
507	pedlo2.SetExtractWindow(15, win/obsolete/);
508	pedlo3.SetExtractWindow(15, win/obsolete/);
509	}
510	else
511	{
512	// FIXME: How to get the fixed value 15 automatically?
513	const Int_t f = (Int_t)(15.5+extractor1->GetHiGainFirst());
514	const Int_t n = (Int_t)(15.5+extractor1->GetNumHiGainSamples());
515	pedlo1.SetExtractWindow(f, n);
516	pedlo2.SetExtractWindow(f, n);
517	pedlo3.SetExtractWindow(f, n);
518	}
519	}
520	if (extractor2)
521	extractor2->SetPedestals(&pedcamab);
522
523	if (extractor3)
524	extractor3->SetPedestals(&pedcamab);
525
526	MFCosmics fcosmics;
527	fcosmics.SetNamePedestalCam("MPedestalFundamental");
528	MContinue contcos(&fcosmics, "ContTrigEvts");
529	contcos.SetInverted();
530
531	//MMcPedestalCopy pcopy;
532	MTaskEnv taskenv1("ExtractSignal");
533	MTaskEnv taskenv2("ExtractTime");
534	MTaskEnv taskenv3("ExtractInterlaced");
535	taskenv1.SetDefault(extractor1);
536	taskenv2.SetDefault(extractor2);
537	taskenv3.SetDefault(extractor3);
538
539	//
540	// This is new calibration to photo-electrons, hard-coded
541	// as decided at the Wuerzburg software meeting 26.01.05
542	//
543	MCalibrateData calib;
544	calib.SetSignalType(MCalibrateData::kPhe);
545	calib.AddPedestal("Fundamental");
546	calib.AddPedestal("FromExtractor");
547	calib.AddPedestal("FromExtractorRndm");
548	calib.SetPedestalFlag(MCalibrateData::kEvent);
549	//----------------------------------------------------------
550
551	MExtractPINDiode pinext;
552	MExtractBlindPixel bldext;
553
554	MFTriggerPattern fcalib("CalibFilter");
555	fcalib.SetDefault(kFALSE);
556	fcalib.RequireCalibration();
557
558	MCalibrationChargeCalc chcalc;
559	MCalibrationRelTimeCalc recalc;
560	MCalibCalcFromPast pacalc;
561	chcalc.SetOutputFile("");
562	recalc.SetOutputFile("");
563
564	pinext.SetPedestals(&pedcamab);
565	bldext.SetPedestals(&pedcamab);
566	chcalc.SetPedestals(&pedcamextr);
567
568	pacalc.SetChargeCalc(&chcalc);
569	if (fIsRelTimesUpdate)
570	pacalc.SetRelTimeCalc(&recalc);
571	pacalc.SetCalibrate(&calib);
572
573	//
574	// Intensity Calibration histogramming
575	//
576	MFillH filpin(&hpndiod, "MExtractedSignalPINDiode", "FillPINDiode");
577	MFillH filbnd(&hbndcam, "MExtractedSignalBlindPixel", "FillBlindCam");
578	MFillH filcam(&hchacam, "MExtractedSignalCam", "FillChargeCam");
579	MFillH filtme(&hrelcam, "MArrivalTimeCam", "FillRelTime");
580	MFillH filhil(&hilocam, "MExtractedSignalCam", "FillHiLoRatio");
581	MFillH filpul(&hpulcam, "MRawEvtData", "FillPulseTime");
582	filpin.SetBit(MFillH::kDoNotDisplay);
583	filbnd.SetBit(MFillH::kDoNotDisplay);
584	filcam.SetBit(MFillH::kDoNotDisplay);
585	filtme.SetBit(MFillH::kDoNotDisplay);
586	filhil.SetBit(MFillH::kDoNotDisplay);
587	filpul.SetBit(MFillH::kDoNotDisplay);
588
589	MCalibrateRelTimes caltm;
590	MBadPixelsCalc bpcal;
591	MBadPixelsTreat treat;
592
593	bpcal.SetNamePedPhotCam("MPedPhotFromExtractor");
594	treat.AddNamePedPhotCam("MPedPhotFundamental");
595	treat.AddNamePedPhotCam("MPedPhotFromExtractor");
596	treat.AddNamePedPhotCam("MPedPhotFromExtractorRndm");
597	if (!extractor2 && !extractor1->InheritsFrom("MExtractTimeAndCharge"))
598	treat.SetProcessTimes(kFALSE);
599
600	MHCamEvent evt0( 0, "PedFLG", "Fundamental Pedestal from Lo Gain;;P [cnts/sl]");
601	MHCamEvent evt1( 2, "PedRmsFLG", "RMS from Extractor applied to ped.;;\\sigma_{p} [cnts/sl]");
602	MHCamEvent evt2( 0, "Extra'd", "Extracted Signal;;S [cnts/sl]");
603	// MHCamEvent evt3(4, "PedPhot", "Calibrated Pedestal;;P [phe]");
604	MHCamEvent evt4( 5, "PedRMS", "Calibrated RMS from Extractor applied to ped.;;\\sigma_{p} [phe]");
605	MHCamEvent evt5( 0, "Interp'd", "Interpolated Signal;;S [phe]");
606	MHCamEvent evt6(102, "Unsuitable", "Fraction of unsuitable events per Pixel;;[1]");
607	MHCamEvent evt7( 6, "Times", "Calibrated Arrival Time;;T [fadc sl]");
608	MHCamEvent evt8( 0, "Conv", "Calibration Conv. Factors;;[phe/fadc cnts]");
609	MHCamEvent evt9( 7, "PulsePos", "Pulse Position of cosmics (>15phe);;T"); //Calibration Conv. Factors;;[phe/fadc cnts]
610	evt6.SetThreshold();
611
612	MFillH fill0(&evt0, "MPedestalFundamental", "FillPedFLG");
613	MFillH fill1(&evt1, "MPedestalFromExtractorRndm", "FillPedRmsFLG");
614	MFillH fill2(&evt2, "MExtractedSignalCam", "FillExtracted");
615	// MFillH fill3(&evt3, "MPedPhotFundamental", "FillPedPhot");
616	MFillH fill4(&evt4, "MPedPhotFromExtractorRndm", "FillPedRMS");
617	MFillH fill5(&evt5, "MSignalCam", "FillInterpolated");
618	MFillH fill6(&evt6, "MBadPixelsCam", "FillUnsuitable");
619	MFillH fill7(&evt7, "MSignalCam", "FillTimes");
620	MFillH fill8(&evt8, "MCalibConstCam", "FillConv");
621	MFillH fill9(&evt9, "MSignalCam", "FillPulse");
622
623	MTaskEnv fillflorian("FinalFantasy");
624	fillflorian.SetDefault();
625
626	// The second rule is for the case reading raw-files!
627	MWriteRootFile write(2, fname, fOverwrite?"RECREATE":"NEW");
628	// Run Header
629	write.AddContainer("MRawRunHeader", "RunHeaders");
630	write.AddContainer("MBadPixelsCam", "RunHeaders");
631	write.AddContainer("MGeomCam", "RunHeaders");
632	// Monte Carlo Headers
633	write.AddContainer("MMcRunHeader", "RunHeaders", kFALSE);
634	write.AddContainer("MMcFadcHeader", "RunHeaders", kFALSE);
635	write.AddContainer("MMcTrigHeader", "RunHeaders", kFALSE);
636	write.AddContainer("MMcConfigRunHeader", "RunHeaders", kFALSE);
637	write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE);
638	// Monte Carlo
639	write.AddContainer("MMcEvt", "Events", kFALSE);
640	write.AddContainer("MMcTrig", "Events", kFALSE);
641	// Data tree
642	write.AddContainer("MSignalCam", "Events");
643	write.AddContainer("MPedPhotFundamental", "Events");
644	write.AddContainer("MPedPhotFromExtractor", "Events");
645	write.AddContainer("MPedPhotFromExtractorRndm", "Events");
646	write.AddContainer("MTime", "Events", kFALSE);
647	write.AddContainer("MRawEvtHeader", "Events");
648	//write.AddContainer("MArrivalTime", "Events", kFALSE);
649	//write.AddContainer("MPointingPos", "Events", kFALSE);
650	// Slow-Control: Current-tree
651	write.AddContainer("MTimeCurrents", "Currents", kFALSE);
652	write.AddContainer("MCameraDC", "Currents", kFALSE);
653	write.AddContainer("MReportCurrents", "Currents", kFALSE);
654	// Slow-Control: Camera-tree
655	write.AddContainer("MReportCamera", "Camera", kFALSE);
656	write.AddContainer("MTimeCamera", "Camera", kFALSE);
657	write.AddContainer("MCameraAUX", "Camera", kFALSE);
658	write.AddContainer("MCameraCalibration", "Camera", kFALSE);
659	write.AddContainer("MCameraCooling", "Camera", kFALSE);
660	write.AddContainer("MCameraHV", "Camera", kFALSE);
661	write.AddContainer("MCameraLV", "Camera", kFALSE);
662	write.AddContainer("MCameraLids", "Camera", kFALSE);
663	// Slow-Control: Trigger-tree
664	write.AddContainer("MReportTrigger", "Trigger", kFALSE);
665	write.AddContainer("MTimeTrigger", "Trigger", kFALSE);
666	// Slow-Control: Drive-tree
667	write.AddContainer("MReportDrive", "Drive", kFALSE);
668	write.AddContainer("MTimeDrive", "Drive", kFALSE);
669	// Slow-Control: Central Control-tree
670	write.AddContainer("MReportCC", "CC", kFALSE);
671	write.AddContainer("MTimeCC", "CC", kFALSE);
672
673	// Write the special MC tree
674	MWriteRootFile writemc(2, fname, fOverwrite?"RECREATE":"NEW");
675	writemc.SetName("WriteMC");
676	writemc.AddContainer("MMcEvtBasic", "OriginalMC");
677
678	// Now setup tasklist for events
679	MTaskList tlist2;
680
681	tlist2.AddToList(&caldec);
682	tlist2.AddToList(&decode);
683	tlist2.AddToList(&apply);
684	tlist2.AddToList(&merge);
685	tlist2.AddToList(&pedlo1);
686	tlist2.AddToList(&pedlo2);
687	tlist2.AddToList(&pedlo3);
688	//-----------------------------------------------------------
689
690	MTaskList tlist3;
691	tlist3.SetFilter(&fcalib);
692
693	if (fIsInterlaced)
694	{
695	tlist2.AddToList(&fcalib);
696	tlist2.AddToList(&tlist3);
697
698	if (IsUsePINDiode())
699	tlist3.AddToList(&pinext);
700	if (IsUseBlindPixel())
701	tlist3.AddToList(&bldext);
702	tlist3.AddToList(&taskenv3);
703	tlist3.AddToList(&pacalc);
704	tlist3.AddToList(&filcam);
705	if (fIsRelTimesUpdate)
706	tlist3.AddToList(&filtme);
707	if (IsUseBlindPixel())
708	tlist3.AddToList(&filbnd);
709	if (IsUsePINDiode())
710	tlist3.AddToList(&filpin);
711	tlist3.AddToList(&chcalc);
712	if (fIsRelTimesUpdate)
713	tlist3.AddToList(&recalc);
714	}
715
716	// Continue for all non-cosmic events
717	tlist2.AddToList(&conttp);
718	if (extractor1)
719	tlist2.AddToList(&taskenv1);
720	if (extractor2)
721	tlist2.AddToList(&taskenv2);
722	tlist2.AddToList(&fill0);
723	tlist2.AddToList(&fill1);
724	tlist2.AddToList(&contcos);
725	if (fIsHiLoCalibration)
726	{
727	plist.AddToList(&hilocam);
728	tlist2.AddToList(&filhil);
729	}
730	if (fIsPulsePosCheck)
731	{
732	plist.AddToList(&hpulcam);
733	tlist2.AddToList(&filpul);
734	}
735
736	tlist2.AddToList(&fill2);
737	tlist2.AddToList(&calib);
738	if (extractor2 \|\| extractor1->InheritsFrom("MExtractTimeAndCharge"))
739	tlist2.AddToList(&caltm);
740	if (fIsInterlaced)
741	tlist2.AddToList(&fill8);
742	tlist2.AddToList(&bpcal);
743	tlist2.AddToList(&treat);
744	tlist2.AddToList(&fill6);
745	// tlist2.AddToList(&fill3);
746	tlist2.AddToList(&fill4);
747	tlist2.AddToList(&fill5);
748	if (extractor2 \|\| extractor1->InheritsFrom("MExtractTimeAndCharge"))
749	tlist2.AddToList(&fill7);
750	tlist2.AddToList(&fill9);
751
752	tlist2.AddToList(&fillflorian);
753
754	// Setup List for Drive-tree
755	//MPointingPosCalc pcalc;
756
757	// Now setup main tasklist
758	tlist.AddToList(read);
759	if (IsUseMC())
760	{
761	tlist.AddToList(&writemc);
762	tlist.AddToList(&contmc);
763	}
764
765	if (IsUseRootData())
766	tlist2.AddToList(&pextr);
767	tlist.AddToList(&tlist2, IsUseRootData() ? "Events" : "All");
768
769	//if (IsUseMC())
770	// tlist.AddToList(&pcalc, "Drive");
771
772	tlist.AddToList(&write);
773
774	// Create and setup the eventloop
775	MEvtLoop evtloop(fName);
776	evtloop.SetParList(&plist);
777	evtloop.SetDisplay(fDisplay);
778	evtloop.SetLogStream(fLog);
779	if (!SetupEnv(evtloop))
780	return kFALSE;
781
782	// Execute first analysis
783	const Bool_t rc = evtloop.Eventloop(fMaxEvents);
784
785	// make sure owned object are deleted
786	if (extractor1 && extractor1!=fExtractor)
787	delete extractor1;
788	if (extractor2)
789	delete extractor2;
790	if (extractor3)
791	delete extractor3;
792
793	// return if job failed
794	if (!rc)
795	{
796	*fLog << err << GetDescriptor() << ": Failed." << endl;
797	return kFALSE;
798	}
799
800	// if everything went ok write and display result
801	DisplayResult(plist);
802
803	if (fIsPixelCheck)
804	{
805	if (fIsPulsePosCheck)
806	hpulcam[fCheckedPixId].DrawClone("");
807
808	if (fIsHiLoCalibration)
809	hilocam[fCheckedPixId].DrawClone("");
810	}
811
812	interlacedcont.Add(&pulcam);
813
814	if (fIsHiLoCalibration)
815	interlacedcont.Add(&hilcam);
816
817	if (fIsPulsePosCheck)
818	interlacedcont.Add(plist.FindObject("MHCalibrationPulseTimeCam"));
819
820	if (fIsHiLoCalibration)
821	interlacedcont.Add(plist.FindObject("MHCalibrationHiLoCam"));
822
823	if (!WriteResult(interlacedcont))
824	return kFALSE;
825
826	// return if job went ok
827	*fLog << all << GetDescriptor() << ": Done." << endl;
828	*fLog << endl << endl;
829
830	return kTRUE;
831	}
832
833
834	void MJCalibrateSignal::DisplayResult(MParList &plist)
835	{
836	if (!fDisplay \|\| !fIsHiLoCalibration)
837	return;
838
839	MCalibrationHiLoCam hcam = (MCalibrationHiLoCam)plist.FindObject("MCalibrationHiLoCam");
840	MGeomCam geom = (MGeomCam)plist.FindObject("MGeomCam");
841	if (!hcam \|\| !geom)
842	return;
843
844	// Create histograms to display
845	MHCamera disp1(*geom, "HiLoConv", "Ratio Amplification HiGain vs. LoGain (Charges)");
846	MHCamera disp2(*geom, "HiLoDiff", "Arrival Time Diff. HiGain vs. LoGain (Times)");
847
848	disp1.SetCamContent(*hcam, 0);
849	disp1.SetCamError( *hcam, 1);
850	disp2.SetCamContent(*hcam, 5);
851	disp2.SetCamError( *hcam, 6);
852
853	disp1.SetYTitle("R [1]");
854	disp2.SetYTitle("\\Delta T [FADC sl.]");
855
856	TCanvas &c1 = fDisplay->AddTab("HiLoConv");
857	c1.Divide(2,3);
858
859	disp1.CamDraw(c1, 1, 2, 1);
860	disp2.CamDraw(c1, 2, 2, 1);
861	}
862

Note: See TracBrowser for help on using the repository browser.

Download in other formats: