Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJCalibrateSignal.cc@ 9061

Visit:

Last change on this file since 9061 was 9038, checked in by tbretz, 16 years ago
* empty log message *
File size: 34.2 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
19	!
20	! Copyright: MAGIC Software Development, 2000-2008
21	!
22	!
23	\* ======================================================================== */
24
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJCalibrateSignal
28	//
29	// This class is reading the output written by callisto. It calibrates
30	// signal and time.
31	//
32	// The signal and time extractors are read from the callisto-output. In
33	// pricipal you could overwrite these default using the resource file,
34	// but this is NOT recommended!
35	//
36	/////////////////////////////////////////////////////////////////////////////
37	#include "MJCalibrateSignal.h"
38
39	#include <TEnv.h>
40	#include <TFile.h>
41
42	// Core
43	#include "MLog.h"
44	#include "MLogManip.h"
45
46	#include "MDirIter.h"
47	#include "MTaskList.h"
48	#include "MParList.h"
49	#include "MEvtLoop.h"
50
51	#include "MStatusDisplay.h"
52
53	// General containers
54	#include "MGeomCam.h"
55	#include "MBadPixelsCam.h"
56	#include "MCalibConstCam.h"
57	#include "MPedestalCam.h"
58	#include "MArrivalTimeCam.h"
59
60	// General histograms
61	#include "MH3.h"
62	#include "MHCamEvent.h"
63	#include "MHVsTime.h"
64
65	// Calibration containers
66	#include "MCalibrationQECam.h"
67	#include "MCalibrationBlindCam.h"
68	#include "MCalibrationChargeCam.h"
69	#include "MCalibrationRelTimeCam.h"
70	#include "MCalibrationChargePINDiode.h"
71
72	// Calibration histograms
73	#include "MHCalibrationChargeCam.h"
74	#include "MHCalibrationChargeBlindCam.h"
75	#include "MHCalibrationChargePINDiode.h"
76	#include "MHCalibrationRelTimeCam.h"
77
78	// Tasks
79	#include "MReadMarsFile.h"
80	#include "MRawFileRead.h"
81	#include "MTaskEnv.h"
82	#include "MContinue.h"
83	#include "MFillH.h"
84	#include "MGeomApply.h"
85	#include "MExtractTimeAndCharge.h"
86	#include "MTriggerPatternDecode.h"
87	#include "MCalibrationPatternDecode.h"
88	#include "MCalibrationChargeCalc.h"
89	#include "MCalibrationRelTimeCalc.h"
90	#include "MCalibCalcFromPast.h"
91	#include "MPedestalSubtract.h"
92	#include "MPedCalcFromLoGain.h"
93	#include "MCalibrateData.h"
94	#include "MExtractPINDiode.h"
95	#include "MExtractBlindPixel.h"
96	#include "MCalibrateRelTimes.h"
97	#include "MBadPixelsCalc.h"
98	#include "MBadPixelsTreat.h"
99	#include "MWriteRootFile.h"
100
101	// Filter
102	#include "MFTriggerPattern.h"
103	#include "MFCosmics.h"
104	#include "MFilterList.h"
105	#include "MFDataPhrase.h"
106
107	// Classes for writing movies
108	#include "MFEvtNumber.h"
109	#include "MMoviePrepare.h"
110	#include "MMovieWrite.h"
111	#include "MImgCleanStd.h"
112
113
114	ClassImp(MJCalibrateSignal);
115
116	using namespace std;
117
118	// --------------------------------------------------------------------------
119	//
120	// Default constructor.
121	//
122	// Sets:
123	// - fIsInterlaced to kTRUE
124	// - fIsRelTimesUpdate to kFALSE
125	// - fIsHiLoCalibration to kFALSE
126	//
127	MJCalibrateSignal::MJCalibrateSignal(const char name, const char title)
128	: fExtractor(0), fIsInterlaced(kTRUE), fIsRelTimesUpdate(kTRUE), fIsMovieMode(kFALSE)
129	{
130	fName = name ? name : "MJCalibrateSignal";
131	fTitle = title ? title : "Tool to calibrate data";
132	}
133
134	MJCalibrateSignal::~MJCalibrateSignal()
135	{
136	if (fExtractor)
137	delete fExtractor;
138	}
139
140	void MJCalibrateSignal::SetExtractor(const MExtractor *ext)
141	{
142	if (fExtractor)
143	delete fExtractor;
144
145	fExtractor = ext ? (MExtractor*)ext->Clone() : NULL;
146	}
147
148	Bool_t MJCalibrateSignal::WriteResult() const
149	{
150	if (IsNoStorage() \|\| fIsMovieMode)
151	return kTRUE;
152
153	// FIXME: This is not nice because it will update the signal
154	// file always. Which might make the usage outside of
155	// callisto difficult.
156	TObjArray cont;
157	cont.Add(const_cast<TEnv*>(GetEnv()));
158	cont.Add(const_cast<MSequence*>(&fSequence));
159
160	if (fDisplay)
161	{
162	TString title = "-- Calibrate Signal: ";
163	title += fSequence.GetSequence();
164	title += " --";
165	fDisplay->SetTitle(title, kFALSE);
166
167	cont.Add(fDisplay);
168	}
169
170	const TString name(Form("signal%08d.root", fSequence.GetSequence()));
171	return WriteContainer(cont, name, "UPDATE");
172	}
173
174	Bool_t MJCalibrateSignal::ReadCalibration(TObjArray &l, MBadPixelsCam &cam, MExtractor* &ext2, MExtractor* &ext3, TString &geom) const
175	{
176	TString fname = Form("%s/calib%08d.root", fPathIn.Data(), fSequence.GetSequence());
177
178	*fLog << inf << "Reading from file: " << fname << endl;
179
180	TFile file(fname, "READ");
181	if (!file.IsOpen())
182	{
183	*fLog << err << dbginf << "ERROR - Could not open file " << fname << endl;
184	return kFALSE;
185	}
186
187	TObject *o = file.Get("ExtractSignal");
188	if (o && !o->InheritsFrom(MExtractor::Class()))
189	{
190	*fLog << err << dbginf << "ERROR - ExtractSignal read from " << fname << " doesn't inherit from MExtractor!" << endl;
191	return kFALSE;
192	}
193	ext3 = o ? (MExtractor*)o->Clone() : NULL;
194
195	o = file.Get("ExtractTime");
196	if (o && !o->InheritsFrom(MExtractor::Class()))
197	{
198	*fLog << err << dbginf << "ERROR - ExtractTime read from " << fname << " doesn't inherit from MExtractor!" << endl;
199	return kFALSE;
200	}
201	ext2 = o ? (MExtractor*)o->Clone() : NULL;
202	if (!ext3 && !ext2)
203	{
204	*fLog << err << dbginf << "ERROR - Neither ExtractSignal nor ExrtractTime found in " << fname << "!" << endl;
205	return kFALSE;
206	}
207
208	o = file.Get("MGeomCam");
209	if (o && !o->InheritsFrom(MGeomCam::Class()))
210	{
211	*fLog << err << dbginf << "ERROR - MGeomCam read from " << fname << " doesn't inherit from MGeomCam!" << endl;
212	return kFALSE;
213	}
214	geom = o ? o->ClassName() : "";
215
216	TObjArray cont(l);
217	cont.Add(&cam);
218	return ReadContainer(cont);
219	}
220
221	// --------------------------------------------------------------------------
222	//
223	// MJCalibration allows to setup several option by a resource file:
224	// MJCalibrateSignal.RawData: yes,no
225	//
226	// For more details see the class description and the corresponding Getters
227	//
228	Bool_t MJCalibrateSignal::CheckEnvLocal()
229	{
230	SetInterlaced(GetEnv("Interlaced", fIsInterlaced));
231	SetRelTimesUpdate(GetEnv("RelTimesUpdate", fIsRelTimesUpdate));
232	SetMovieMode(GetEnv("MovieMode", fIsMovieMode));
233
234	return MJCalib::CheckEnvLocal();
235	}
236
237	Bool_t MJCalibrateSignal::Process(MPedestalCam &pedcamab, MPedestalCam &pedcambias,
238	MPedestalCam &pedcamextr)
239	{
240	if (!fSequence.IsValid())
241	{
242	*fLog << err << "ERROR - Sequence invalid..." << endl;
243	return kFALSE;
244	}
245
246	*fLog << inf;
247	fLog->Separator(GetDescriptor());
248	*fLog << "Calculate calibrated data from Sequence #";
249	*fLog << fSequence.GetSequence() << endl << endl;
250
251
252	//if (!CheckEnv())
253	// return kFALSE;
254
255	CheckEnv();
256
257	// --------------------------------------------------------------------------------
258
259	MDirIter iter;
260	if (fSequence.IsValid())
261	{
262	if (fSequence.GetRuns(iter, MSequence::kRawDat)<=0)
263	return kFALSE;
264	}
265
266	// Read File
267	MHCalibrationChargeCam hchacam;
268	MHCalibrationChargeBlindCam hbndcam;
269	MHCalibrationChargePINDiode hpndiod;
270	MHCalibrationRelTimeCam hrelcam;
271	//MHCalibrationHiLoCam hilocam;
272	//MHCalibrationPulseTimeCam hpulcam;
273
274	hchacam.SetOscillations(kFALSE);
275	hbndcam.SetOscillations(kFALSE);
276	hrelcam.SetOscillations(kFALSE);
277
278	MCalibrationChargeCam calcam;
279	MCalibrationQECam qecam;
280	MCalibrationBlindCam bndcam;
281	MCalibrationChargePINDiode pind;
282	MCalibrationRelTimeCam tmcam;
283	//MCalibrationHiLoCam hilcam;
284	//MCalibrationPulseTimeCam pulcam;
285
286	MBadPixelsCam badpix;
287
288	TObjArray interlacedcont;
289	if (fIsInterlaced)
290	{
291	interlacedcont.Add(&hchacam);
292	if (IsUseBlindPixel())
293	interlacedcont.Add(&hbndcam);
294	if (IsUsePINDiode())
295	interlacedcont.Add(&hpndiod);
296	if (fIsRelTimesUpdate)
297	interlacedcont.Add(&hrelcam);
298	}
299
300	MExtractor *extractor1=fExtractor;
301	MExtractor *extractor2=0;
302	MExtractor *extractor3=0;
303	TString geom;
304
305	TObjArray calibcont;
306	calibcont.Add(&calcam);
307	calibcont.Add(&qecam);
308	calibcont.Add(&bndcam);
309	calibcont.Add(&tmcam);
310	if (IsUseBlindPixel())
311	calibcont.Add(&bndcam);
312
313	if (!ReadCalibration(calibcont, badpix, extractor2, extractor3, geom))
314	return kFALSE;
315
316	*fLog << all;
317	if (!geom.IsNull())
318	*fLog << inf << "Camera geometry found in file: " << geom << endl;
319	else
320	*fLog << inf << "No Camera geometry found using default <MGeomCamMagic>" << endl;
321
322	if (extractor3)
323	{
324	*fLog << underline << "Signal Extractor found in calibration file" << endl;
325	extractor3->Print();
326	*fLog << endl;
327	}
328	else
329	*fLog << inf << "No Signal Extractor: ExtractSignal in file." << endl;
330
331
332	if (extractor1)
333	{
334	*fLog << underline << "Modified Signal Extractor set by user." << endl;
335	extractor1->Print();
336	*fLog << endl;
337	}
338	else
339	{
340	*fLog << inf << "No modified Signal Extractor set by user... using ExtractSignal." << endl;
341	extractor1 = extractor3 ? (MExtractor*)extractor3->Clone() : 0;
342	}
343
344	if (extractor2)
345	{
346	*fLog << underline << "Time Extractor found in calibration file" << endl;
347	extractor2->Print();
348	*fLog << endl;
349	}
350	else
351	*fLog << inf << "No Time Extractor: ExtractTime in file." << endl;
352
353	// This is necessary for the case in which it is not in the files
354	MCalibConstCam constcam;
355
356	//MBadPixelsCam badcam;
357	constcam.SetBadPixels(&badpix);
358
359	// Setup Parlist
360	MParList plist;
361	plist.AddToList(this); // take care of fDisplay!
362	plist.AddToList(&badpix);
363	plist.AddToList(&constcam);
364	//plist.AddToList(&hilcam);
365	plist.AddToList(&calibcont); // Using AddToList(TObjArray *)
366	plist.AddToList(&interlacedcont); // Using AddToList(TObjArray *)
367	//plist.AddToList(&pulcam);
368
369	// Setup Tasklist
370	MTaskList tlist;
371	plist.AddToList(&tlist);
372
373	MReadMarsFile readmc("Events");
374	readmc.DisableAutoScheme();
375
376	MRawFileRead rawread(NULL);
377	rawread.SetForceMode(); // Ignore broken time-stamps
378
379	MRead read = fSequence.IsMonteCarlo() ? (MRead)&readmc : (MRead*)&rawread;
380	read->AddFiles(iter);
381
382	const TString fname(Form("%s{s/_D_/_Y_}{s/\\.raw$/.root}{s/\\.raw\\.gz$/.root}", fPathOut.Data()));
383
384	// Skips MC which have no contents. This are precisely the
385	// events which fullfilled the MC Lvl1 trigger and an
386	// arbitrary cut (typically at 50phe) to speed up simulation
387	MContinue contmc("MRawEvtData.GetNumPixels<0.5", "ContEmptyMC");
388
389	//MPointingPosInterpolate pextr;
390	//pextr.AddFiles(&iter);
391
392	MGeomApply apply; // Only necessary to create geometry
393	if (!geom.IsNull())
394	apply.SetGeometry(geom);
395	//MBadPixelsMerge merge(&badpix);
396
397	// Make sure that pedcamab has the correct name
398	pedcamab.SetName("MPedestalFundamental");
399	pedcamextr.SetName("MPedestalFromExtractorRndm");
400	pedcambias.SetName("MPedestalFromExtractor");
401	plist.AddToList(&pedcamextr);
402	plist.AddToList(&pedcambias);
403	plist.AddToList(&pedcamab);
404
405	MArrivalTimeCam timecam;
406	plist.AddToList(&timecam);
407
408	// Check for interleaved events
409	MCalibrationPatternDecode caldec;
410	MTriggerPatternDecode decode;
411
412	MH3 hpat("MRawRunHeader.GetFileID", "MTriggerPattern.GetUnprescaled");
413	if (fSequence.IsMonteCarlo())
414	hpat.SetWeight("100./MMcRunHeader.fNumSimulatedShowers");
415	else
416	hpat.SetWeight("1./TMath::Max(MRawRunHeader.GetRunLength,1)");
417	hpat.SetName("TrigPat");
418	hpat.SetTitle("Rate of the trigger pattern [Hz];File Id;Trigger Pattern;Rate [Hz]");
419	hpat.InitLabels(MH3::kLabelsXY);
420	//hpat.DefineLabelsY("1=Lvl1;2=Cal;3=Cal;4=Lvl2;5=Cal;7=Cal;8=Ped;9=Ped+Trig;13=Ped+Trig;16=Pin;32=Sum");
421	hpat.DefaultLabelY("UNKNOWN");
422	hpat.DefineLabelY( 0, "0"); // 0: No pattern
423	hpat.DefineLabelY( 1, "Trig"); // 1: Lvl1
424	hpat.DefineLabelY( 2, "Cal"); // 2: Cal
425	hpat.DefineLabelY( 3, "Cal"); // Cal+Lvl1
426	hpat.DefineLabelY( 4, "Trig"); // 4: Lvl2
427	hpat.DefineLabelY( 5, "Trig"); // Lvl2+Lvl1
428	hpat.DefineLabelY( 7, "Cal"); // Lvl2+Cal+Lvl
429	hpat.DefineLabelY( 8, "Ped"); // 8: Ped
430	hpat.DefineLabelY( 9, "Ped+Trig"); // Ped+Lvl1
431	hpat.DefineLabelY(10, "Ped+Cal"); // Ped+Cal
432	hpat.DefineLabelY(12, "Ped+Trig"); // Ped+Lvl2
433	hpat.DefineLabelY(13, "Ped+Trig"); // Ped+Lvl2+Lvl1
434	hpat.DefineLabelY(16, "Pin"); // 16: Pin
435	hpat.DefineLabelY(32, "Sum"); // 32: Sum
436	hpat.DefineLabelY(33, "Trig"); // Sum+Lvl1
437	hpat.DefineLabelY(34, "Cal"); // Sum+Cal
438	hpat.DefineLabelY(35, "Cal"); // Sum+Cal+Lvl1
439	hpat.DefineLabelY(36, "Trig"); // Sum+Lvl2
440	hpat.DefineLabelY(37, "Trig"); // Sum+Lvl1+Lvl2
441	hpat.DefineLabelY(39, "Cal"); // Sum+Lvl2+Cal+Lvl1
442
443	MFillH fillpat(&hpat, "", "FillPattern");
444	fillpat.SetDrawOption("box");
445
446	// This will make that for data with version less than 5, where
447	// trigger patterns were not yet correct, all the events in the real
448	// data file will be processed. In any case there are no interleaved
449	// calibration events in such data, so this is fine.
450	// We allow only cosmics triggered events to pass (before prescaling)
451	MFTriggerPattern fcalped("SelectTrigEvts");
452	fcalped.SetInverted();
453	fcalped.SetDefault(kTRUE);
454	fcalped.DenyAll();
455	fcalped.AllowTriggerLvl1();
456	fcalped.AllowTriggerLvl2();
457	fcalped.AllowSumTrigger();
458
459	// This will skip interleaved events with a cal- or ped-trigger
460	MContinue contcalped(&fcalped, "ContNonTrigger");
461
462	// Create the pedestal subtracted raw-data
463	MPedestalSubtract pedsub;
464	pedsub.SetPedestalCam(&pedcamab);
465
466	// Do signal and pedestal calculation
467	MPedCalcFromLoGain pedlo1("MPedCalcFundamental");
468	pedlo1.SetPedestalUpdate(kTRUE);
469	pedlo1.SetNamePedestalCamOut("MPedestalFundamental");
470
471	MPedCalcFromLoGain pedlo2("MPedCalcWithExtractorRndm");
472	pedlo2.SetPedestalUpdate(kTRUE);
473	pedlo2.SetRandomCalculation(kTRUE);
474	pedlo2.SetNamePedestalCamOut("MPedestalFromExtractorRndm");
475
476	MPedCalcFromLoGain pedlo3("MPedCalcWithExtractor");
477	pedlo3.SetPedestalUpdate(kTRUE);
478	pedlo3.SetRandomCalculation(kFALSE);
479	pedlo3.SetNamePedestalCamOut("MPedestalFromExtractor");
480
481	if (!extractor1)
482	{
483	*fLog << err << "ERROR - extractor1 == NULL" << endl;
484	return kFALSE;
485	}
486
487	// Setup to use the hi-gain extraction window in the lo-gain
488	// range (the start of the lo-gain range is added automatically
489	// by MPedCalcFromLoGain)
490	//
491	// The window size of the extractor is not yet initialized,
492	// so we have to stick to the extraction range
493	//
494	// Even if we would like to use a range comparable to the
495	// hi-gain extraction we use the lo-gain range to make
496	// sure that exclusions (eg. due to switching noise)
497	// are correctly handled.
498	//
499	pedlo1.SetRangeFromExtractor(*extractor1);
500
501	if (extractor1->InheritsFrom("MExtractTimeAndCharge"))
502	{
503	pedlo2.SetExtractor((MExtractTimeAndCharge*)extractor1);
504	pedlo3.SetExtractor((MExtractTimeAndCharge*)extractor1);
505	}
506	else
507	{
508	pedlo2.SetRangeFromExtractor(*extractor1);
509	pedlo3.SetRangeFromExtractor(*extractor1);
510	}
511
512	//------------------------------
513	//
514	// this is the filter to find pedestal events. For the Siegen FADC
515	// these are all events which are not calibration events because
516	// the pedestal is extracted from the lo-gain signal. For MUX
517	// data this are artifiially triggered events with the pedestal
518	// trigger flag, and for safty without Lvl1 or Lvl2 flag)
519	//
520	// For the time "before" the trigger pattern all events (Siegen FADC)
521	// can be considered to be pedestal, because this was also the time
522	// without artifially calibration events
523	//
524	// Deny or allow is done before prescaling.
525	//
526	MFTriggerPattern fped("SelectPedestals");
527	fped.SetDefault(kTRUE);
528	fped.DenyCalibration();
529	if (!extractor1->HasLoGain())
530	{
531	fped.DenyAll();
532	fped.RequirePedestal();
533	}
534
535	//------------------------------
536	//
537	// Apply a filter against cosmics (this is to make sure that the
538	// trigger system was working properly and no empty events survive)
539	// For every event 5% of the pixel must not be empty. In PostProcess
540	// an error is raised if more than 50% of the events were skipped.
541	//
542	MFCosmics fcosmicscal;
543	fcosmicscal.SetNamePedestalCam("MPedestalFundamental"); //CORRECT?
544	fcosmicscal.SetMaxEmptyPixels(0.05);
545	fcosmicscal.SetMaxAcceptedFraction(0.5);
546
547	MContinue contcoscal(&fcosmicscal, "ContCosmicsCal");
548
549	//------------------------------
550	/*
551	MFCosmics fcosmicsped; // Def=20% empty pixels
552	fcosmicsped.SetNamePedestalCam("MPedestalFundamental"); //CORRECT?
553	MContinue contcosped(&fcosmicsped, "ContCosmicsPed");
554	contcosped.SetInverted();
555	*/
556
557	//------------------------------
558	//
559	// Thie signal extractors
560	//
561	MTaskEnv taskenv1("ExtractSignal");
562	MTaskEnv taskenv2("ExtractTime");
563	MTaskEnv taskenv3("ExtractInterlaced");
564	taskenv1.SetDefault(extractor1);
565	taskenv2.SetDefault(extractor2);
566	taskenv3.SetDefault(extractor3);
567
568	//
569	// This is new calibration to photo-electrons, hard-coded
570	// as decided at the Wuerzburg software meeting 26.01.05
571	//
572	MCalibrateData calib;
573	calib.SetSignalType(MCalibrateData::kPhe);
574	//calib.AddPedestal("Fundamental");
575	calib.AddPedestal("FromExtractor");
576	calib.AddPedestal("FromExtractorRndm");
577	calib.SetPedestalFlag(MCalibrateData::kEvent);
578
579	//----------------------------------------------------------
580
581	MExtractPINDiode pinext;
582	MExtractBlindPixel bldext;
583
584	// Execute for all events with the calibration trigger. If no
585	// trigger pattern is available do not execute it
586	// The selection is done before prescaling.
587	MFTriggerPattern fcalib("SelectCalEvts");
588	fcalib.SetDefault(kFALSE);
589	fcalib.DenyAll();
590	fcalib.RequireCalibration();
591	fcalib.AllowTriggerLvl1();
592	fcalib.AllowTriggerLvl2();
593	fcalib.AllowSumTrigger();
594
595	MCalibrationChargeCalc chcalc;
596	chcalc.SetContinousCalibration();
597	chcalc.SetExtractor(extractor3);
598
599	MCalibrationRelTimeCalc recalc;
600	MCalibCalcFromPast pacalc;
601
602	chcalc.SetPedestals(&pedcamextr);
603
604	pacalc.SetChargeCalc(&chcalc);
605	if (fIsRelTimesUpdate)
606	pacalc.SetRelTimeCalc(&recalc);
607	pacalc.SetCalibrate(&calib);
608
609	//
610	// Calibration histogramming
611	//
612	MFillH filpin(&hpndiod, "MExtractedSignalPINDiode", "FillPINDiode");
613	MFillH filbnd(&hbndcam, "MExtractedSignalBlindPixel", "FillBlindCam");
614	MFillH filcam(&hchacam, "MExtractedSignalCam", "FillChargeCam");
615	MFillH filtme(&hrelcam, "MArrivalTimeCam", "FillRelTime");
616	//MFillH filhil(&hilocam, "MExtractedSignalCam", "FillHiLoRatio");
617	//MFillH filpul(&hpulcam, "MRawEvtData", "FillPulseTime");
618	filpin.SetBit(MFillH::kDoNotDisplay);
619	filbnd.SetBit(MFillH::kDoNotDisplay);
620	filcam.SetBit(MFillH::kDoNotDisplay);
621	filtme.SetBit(MFillH::kDoNotDisplay);
622	//filhil.SetBit(MFillH::kDoNotDisplay);
623	//filpul.SetBit(MFillH::kDoNotDisplay);
624
625	MCalibrateRelTimes caltm;
626	MBadPixelsCalc bpcal;
627	MBadPixelsTreat treat;
628
629	//bpcal.SetNamePedPhotCam("MPedPhotFromExtractor");
630	bpcal.SetNamePedPhotCam("MPedPhotFromExtractorRndm");
631
632	//treat.AddNamePedPhotCam("MPedPhotFundamental");
633	treat.AddNamePedPhotCam("MPedPhotFromExtractor");
634	treat.AddNamePedPhotCam("MPedPhotFromExtractorRndm");
635	if (!extractor2 && !extractor1->InheritsFrom("MExtractTimeAndCharge"))
636	treat.SetProcessTimes(kFALSE);
637
638	MHCamEvent evt0( 0, "PedFLG", "Fundamental Pedestal from Lo Gain;;P [cnts/sl]");
639	MHCamEvent evt1( 2, "PedRmsFLG", "RMS from Extractor applied to ped.;;\\sigma_{p} [cnts/sl]");
640	MHCamEvent evt2( 0, "Extra'd", "Extracted Signal;;S [cnts/sl]");
641	// MHCamEvent evt3(4, "PedPhot", "Calibrated Pedestal;;P [phe]");
642	MHCamEvent evt4( 5, "PedRMS", "Calibrated RMS from Extractor applied to ped.;;\\sigma_{p} [phe]");
643	MHCamEvent evt5( 0, "Interp'd", "Interpolated Signal scaled with A/A_{0};;S [phe]");
644	MHCamEvent evt6(102, "Unsuitable", "Fraction of unsuitable events per Pixel;;[1]");
645	// MHCamEvent evt7( 6, "Times", "Calibrated Arrival Time;;T [fadc sl]");
646	MHCamEvent evt8( 0, "Conv", "Calibration Conv. Factors;;[phe/cnts]");
647	MHCamEvent evt9( 7, "PulsePos", "Pulse Position of cosmics (>50phe);;T [ns]");
648	MHCamEvent evtR( 4, "HiLoCal", "Hi-/Lo-Gain ratio;;Ratio");
649	MHCamEvent evtO( 7, "HiLoOff", "Lo-/Hi-Gain Offset;;Offset");
650	MHCamEvent evtC( 4, "CalPos", "Extracted pulse position of calibration pulses;;T [sl]");
651	//MHCamEvent evt2(0, "Extra'd", "Extracted Calibration Signal;;S [cnts/sl]");
652	evt2.SetErrorSpread(kFALSE);
653	evt5.SetErrorSpread(kFALSE);
654	evt6.SetErrorSpread(kFALSE);
655	evt6.SetThreshold();
656
657	MFillH fill0(&evt0, "MPedestalFundamental", "FillPedFLG");
658	MFillH fill1(&evt1, "MPedestalFromExtractorRndm", "FillPedRmsFLG");
659	MFillH fill2(&evt2, "MExtractedSignalCam", "FillExtracted");
660	// MFillH fill3(&evt3, "MPedPhotFundamental", "FillPedPhot");
661	MFillH fill4(&evt4, "MPedPhotFromExtractorRndm", "FillPedRMS");
662	MFillH fill5(&evt5, "MSignalCam", "FillInterpolated");
663	MFillH fill6(&evt6, "MBadPixelsCam", "FillUnsuitable");
664	// MFillH fill7(&evt7, "MSignalCam", "FillTimes");
665	MFillH fill8(&evt8, "MCalibConstCam", "FillConv");
666	MFillH fill9(&evt9, "MSignalCam", "FillPulsePos");
667	MFillH fillR(&evtR, "MExtractedSignalCam", "FillHiLoCal");
668	MFillH fillO(&evtO, "MArrivalTimeCam", "FillHiLoOff");
669	MFillH fillC(&evtC, "MArrivalTimeCam", "FillCalPos");
670	//MFillH fill2(&evt2, "MExtractedSignalCam", "FillExtractedSignal");
671
672	MHVsTime histbp("MBadPixelsCam.GetNumUnsuitable");
673	histbp.SetName("BadPixTm");
674	histbp.SetTitle("Number of unsuitable pixels;;N");
675	histbp.SetMinimum(0);
676
677	MHVsTime histdp("MSignalCam.GetNumPixelsUnmapped");
678	histdp.SetName("DeadPixTm");
679	histdp.SetTitle("Number of dead/unmapped pixels;;N");
680	histdp.SetMinimum(0);
681
682	// Task to fill the histogram
683	MFillH fillB(&histbp, "MTime", "FillBadPixTm");
684	MFillH fillD(&histdp, "MTime", "FillDeadPixTm");
685	fillB.SetNameTab("BadPixTm");
686	fillD.SetNameTab("DeadPixTm");
687
688	/*
689	MFillH fillP("MHPulseShape", "", "FillPulseShape");
690	fillP.SetNameTab("Pulse");
691	*/
692
693	/*
694	MHVsTime hbadpix("MBadPixelsCam.GetNumUnsuitable");
695	hbadpix.SetNumEvents(50);
696	MFillH fillB(&hbadpix, "MTime");
697	*/
698
699	MTaskEnv fillflorian("FinalFantasy");
700	fillflorian.SetDefault();
701
702	// The second rule is for the case reading raw-files!
703	MWriteRootFile write(2, fname, fOverwrite?"RECREATE":"NEW");
704	// Run Header
705	write.AddContainer("MRawRunHeader", "RunHeaders");
706	// write.AddContainer("MBadPixelsCam", "RunHeaders");
707	write.AddContainer("MGeomCam", "RunHeaders");
708	// Monte Carlo Headers
709	write.AddContainer("MMcRunHeader", "RunHeaders", kFALSE);
710	write.AddContainer("MMcFadcHeader", "RunHeaders", kFALSE);
711	write.AddContainer("MMcTrigHeader", "RunHeaders", kFALSE);
712	write.AddContainer("MMcConfigRunHeader", "RunHeaders", kFALSE);
713	write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE);
714	// Monte Carlo
715	write.AddContainer("MMcEvt", "Events", kFALSE);
716	write.AddContainer("MMcTrig", "Events", kFALSE);
717	// Data tree
718	write.AddContainer("MSignalCam", "Events");
719	// write.AddContainer("MPedPhotFundamental", "Events");
720	write.AddContainer("MPedPhotFromExtractor", "Events");
721	write.AddContainer("MPedPhotFromExtractorRndm", "Events");
722	write.AddContainer("MTime", "Events", kFALSE);
723	write.AddContainer("MRawEvtHeader", "Events");
724	write.AddContainer("MTriggerPattern", "Events");
725
726	// Trees with slow-control information (obsolete
727	// if we don't read merpped root-files)
728	write.AddTree("Trigger", kFALSE);
729	write.AddTree("Drive", kFALSE);
730	write.AddTree("CC", kFALSE);
731	write.AddTree("Pyrometer", kFALSE);
732	write.AddTree("Currents", kFALSE);
733	write.AddTree("Camera", kFALSE);
734	// Slow-Control: Current-tree
735	write.AddContainer("MCameraDC", "Currents", kFALSE);
736	// Slow-Control: Camera-tree
737	write.AddContainer("MCameraAUX", "Camera", kFALSE);
738	write.AddContainer("MCameraCalibration", "Camera", kFALSE);
739	write.AddContainer("MCameraCooling", "Camera", kFALSE);
740	write.AddContainer("MCameraHV", "Camera", kFALSE);
741	write.AddContainer("MCameraLV", "Camera", kFALSE);
742	write.AddContainer("MCameraLids", "Camera", kFALSE);
743
744	// Write the special MC tree
745	MWriteRootFile writemc(2, fname, fOverwrite?"RECREATE":"NEW");
746	writemc.SetName("WriteMC");
747	writemc.AddContainer("MMcEvtBasic", "OriginalMC");
748
749	// Write the special calib tree
750	/*
751	MWriteRootFile writecal(2, fname, fOverwrite?"RECREATE":"NEW");
752	writecal.SetName("WriteCalib");
753	writecal.AddContainer("MBadPixelsCam", "Calib");
754	writecal.AddContainer("MCalibrationChargeCam", "Calib");
755	writecal.AddContainer("MCalibrationRelTimeCam", "Calib");
756	*/
757
758	//-----------------------------------------------------------
759	// Build tasklist
760
761	MTaskList tlist2("AllEvents");
762
763	tlist2.AddToList(&caldec);
764	tlist2.AddToList(&decode);
765	tlist2.AddToList(&fillpat);
766	tlist2.AddToList(&apply);
767	//tlist2.AddToList(&merge);
768	tlist2.AddToList(&pedsub);
769
770	//-----------------------------------------------------------
771	// Pedestal extraction
772
773	MTaskList tlist3("PedEvents");
774	tlist3.SetFilter(&fped); // Deny events with cal-trigger
775
776	tlist2.AddToList(&fped); // If no lo-gain require ped-trigger
777	tlist2.AddToList(&tlist3); // and deny cosmics (lvl1/2) trigger
778
779	tlist3.AddToList(&pedlo1); // extract pedestal events
780	tlist3.AddToList(&pedlo2); // extract pedestal events
781	tlist3.AddToList(&pedlo3); // extract pedestal events
782	tlist3.AddToList(&fill0); // fill pedestal events
783	tlist3.AddToList(&fill1); // fill pedestal events
784
785	//-----------------------------------------------------------
786	// Calibration
787
788	MTaskList tlist4("CalEvents");
789	tlist4.SetFilter(&fcalib); // process only events with cal-trigger
790
791	//MFDataPhrase filcalco("MCalibrationConstCam.IsReadyToSave>0.5", "CalibConstFilter");
792	if (fIsInterlaced)
793	{
794	// The task list is executed for all events with the calibration
795	// trigger
796	tlist2.AddToList(&fcalib); // MFTriggerPattern
797	tlist2.AddToList(&tlist4);
798
799	tlist4.AddToList(&taskenv3);
800	tlist4.AddToList(&contcoscal); // MContinue/ContCosmicsCal
801	if (IsUsePINDiode())
802	tlist4.AddToList(&pinext); // MExtractPINDiode
803	if (IsUseBlindPixel())
804	tlist4.AddToList(&bldext); // MExtractBlindPixel
805	tlist4.AddToList(&pacalc); // MCalibCalcFromPast
806	/*
807	tlist3.AddToList(&filcalco); // CalibConstFilter (IsReadyToSave)
808	fill8.SetFilter(&filcalco);
809	tlist3.AddToList(&fill8); // FillConvUpd
810	*/
811
812	tlist4.AddToList(&filcam); // FillChargeCam
813	if (fIsRelTimesUpdate)
814	tlist4.AddToList(&filtme); // FillRelTime
815	if (IsUseBlindPixel())
816	tlist4.AddToList(&filbnd); // FillBlindCam
817	if (IsUsePINDiode())
818	tlist4.AddToList(&filpin); // FillPINDiode
819	tlist4.AddToList(&chcalc); // MCalibrationChargeCalc
820	if (fIsRelTimesUpdate)
821	tlist4.AddToList(&recalc); // MCalibrationRelTimeCam
822
823	tlist4.AddToList(&fillC); // FillCalPos
824
825	//tlist3.AddToList(&writecal); // MWriteRootFile
826	}
827
828	//-----------------------------------------------------------
829	// Cosmics extraction
830
831	// remove all events with a cal- or ped-trigger (no matter
832	// whether they have lvl1 or lvl2 or any other flag
833	tlist2.AddToList(&contcalped);
834
835	// Extract the signal
836	if (extractor1)
837	tlist2.AddToList(&taskenv1);
838
839	// remove all events which definitly don't have a signal
840	// using MFCosmics (ContCosmicsPed)
841	// tlist2.AddToList(&contcosped);
842
843	// Extract arrival time (if a dedicated extrator given)
844	if (extractor2)
845	tlist2.AddToList(&taskenv2);
846
847	/*
848	if (fIsHiLoCalibration)
849	{
850	plist.AddToList(&hilocam);
851	tlist2.AddToList(&filhil);
852	}
853
854	if (fIsPulsePosCheck)
855	{
856	plist.AddToList(&hpulcam);
857	tlist2.AddToList(&filpul);
858	}
859	*/
860
861	tlist2.AddToList(&fill2);
862	tlist2.AddToList(&fill8); // FillConv
863	tlist2.AddToList(&calib); // MCalibrateData
864	if (extractor2 \|\| extractor1->InheritsFrom("MExtractTimeAndCharge"))
865	tlist2.AddToList(&caltm);
866
867	tlist2.AddToList(&bpcal); // MBadPixelsCalc
868	tlist2.AddToList(&treat); // MBadPixelsTreat
869	tlist2.AddToList(&fill6);
870	// tlist2.AddToList(&fill3);
871	tlist2.AddToList(&fill4);
872	tlist2.AddToList(&fill5);
873	//if (extractor2 \|\| extractor1->InheritsFrom("MExtractTimeAndCharge"))
874	// tlist2.AddToList(&fill7);
875	tlist2.AddToList(&fill9);
876	if (!fSequence.IsMonteCarlo())
877	{
878	tlist2.AddToList(&fillB);
879	tlist2.AddToList(&fillD);
880	}
881	if (extractor1->HasLoGain())
882	{
883	tlist2.AddToList(&fillR);
884	tlist2.AddToList(&fillO);
885	}
886
887	/*
888	MFillH fillC("MHCleaning", "", "FillClean");
889	tlist2.AddToList(&fillC);
890
891	//tlist2.AddToList(&fillP);
892	*/
893
894	// ----- Start: Code for encoding movies -----
895
896	MMoviePrepare movprep;
897	MMovieWrite movwrite;
898	movprep.SetRangeFromExtractor(*extractor1);
899
900	//MFDataPhrase movfilt("MMovieData.fMax>150");
901	MFDataPhrase movfilt("MMovieData.fMax>5*MMovieData.fMedianPedestalRms", "MovieFilter");
902
903	MImgCleanStd movclean(8.5, 4.0);
904	movclean.SetMethod(MImgCleanStd::kAbsolute);
905
906	//movprep.SetFilter(&evtnum);
907	movclean.SetFilter(&movfilt);
908	movwrite.SetFilter(&movfilt);
909
910	MTaskList tlistmov("MovieEncoder");
911	tlistmov.AddToList(&movprep);
912	tlistmov.AddToList(&movfilt);
913	tlistmov.AddToList(&movclean);
914	tlistmov.AddToList(&movwrite);
915
916	MFEvtNumber evtnum;
917	//evtnum.SetSelector("ThetaSquared.fVal<0.04");
918	//evtnum.SetFileName("ganymed00000001.root");
919	tlistmov.SetFilter(&evtnum);
920
921	if (fIsMovieMode)
922	{
923	tlist2.AddToList(&evtnum);
924	tlist2.AddToList(&tlistmov);
925	}
926
927	// ----- End: Code for encoding movies -----
928
929	tlist2.AddToList(&fillflorian);
930
931	// Setup List for Drive-tree
932	//MPointingPosCalc pcalc;
933
934	// Now setup main tasklist
935	tlist.AddToList(read);
936
937	if (fSequence.IsMonteCarlo())
938	{
939	if (!fIsMovieMode && !HasNullOut())
940	tlist.AddToList(&writemc);
941	tlist.AddToList(&contmc);
942	}
943
944	//if (IsUseRootData())
945	// tlist2.AddToList(&pextr);
946	tlist.AddToList(&tlist2, fSequence.IsMonteCarlo() ? "Events" : "All");
947
948	//if (fSequence.IsMonteCarlo())
949	// tlist.AddToList(&pcalc, "Drive");
950
951	if (!fIsMovieMode && !HasNullOut())
952	tlist.AddToList(&write);
953
954	// Create and setup the eventloop
955	MEvtLoop evtloop(fName);
956	evtloop.SetParList(&plist);
957	evtloop.SetDisplay(fDisplay);
958	evtloop.SetLogStream(fLog);
959	if (!SetupEnv(evtloop))
960	return kFALSE;
961
962	// Execute first analysis
963	const Bool_t rc = evtloop.Eventloop(fMaxEvents);
964
965	// make sure owned object are deleted
966	if (extractor1 && extractor1!=fExtractor)
967	delete extractor1;
968	if (extractor2)
969	delete extractor2;
970	if (extractor3)
971	delete extractor3;
972
973	// return if job failed
974	if (!rc)
975	{
976	*fLog << err << GetDescriptor() << ": Failed." << endl;
977	return kFALSE;
978	}
979
980	// if everything went ok write and display result
981	DisplayResult(plist);
982
983	/*
984	if (fIsPixelCheck)
985	{
986	if (fIsPulsePosCheck)
987	hpulcam[fCheckedPixId].DrawClone("");
988
989	//if (fIsHiLoCalibration)
990	// hilocam[fCheckedPixId].DrawClone("");
991	}
992	interlacedcont.Add(&pulcam);
993	*/
994
995	//if (fIsHiLoCalibration)
996	// interlacedcont.Add(&hilcam);
997
998	//if (fIsPulsePosCheck)
999	// interlacedcont.Add(plist.FindObject("MHCalibrationPulseTimeCam"));
1000
1001	//if (fIsHiLoCalibration)
1002	// interlacedcont.Add(plist.FindObject("MHCalibrationHiLoCam"));
1003
1004	if (!WriteResult())
1005	return kFALSE;
1006
1007	// return if job went ok
1008	*fLog << all << GetDescriptor() << ": Done." << endl;
1009	*fLog << endl << endl;
1010
1011	return kTRUE;
1012	}
1013
1014
1015	void MJCalibrateSignal::DisplayResult(MParList &plist)
1016	{
1017	/*
1018	if (!fDisplay \|\| !fIsHiLoCalibration)
1019	return;
1020
1021	MCalibrationHiLoCam hcam = (MCalibrationHiLoCam)plist.FindObject("MCalibrationHiLoCam");
1022	MGeomCam geom = (MGeomCam)plist.FindObject("MGeomCam");
1023	if (!hcam \|\| !geom)
1024	return;
1025
1026	// Create histograms to display
1027	MHCamera disp1(*geom, "HiLoConv", "Ratio Amplification HiGain vs. LoGain (Charges)");
1028	MHCamera disp2(*geom, "HiLoDiff", "Arrival Time Diff. HiGain vs. LoGain (Times)");
1029
1030	disp1.SetCamContent(*hcam, 0);
1031	disp1.SetCamError( *hcam, 1);
1032	disp2.SetCamContent(*hcam, 5);
1033	disp2.SetCamError( *hcam, 6);
1034
1035	disp1.SetYTitle("R [1]");
1036	disp2.SetYTitle("\\Delta T [FADC sl.]");
1037
1038	TCanvas &c1 = fDisplay->AddTab("HiLoConv");
1039	c1.Divide(2,3);
1040
1041	disp1.CamDraw(c1, 1, 2, 1);
1042	disp2.CamDraw(c1, 2, 2, 1);
1043	*/
1044	}
1045

Note: See TracBrowser for help on using the repository browser.

Download in other formats: