Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJCalibration.cc@ 4098

Visit:

Last change on this file since 4098 was 4066, checked in by gaug, 21 years ago
* empty log message *
File size: 36.9 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
19	! Markus Gaug, 02/2004 <mailto:markus@ifae.es>
20	!
21	! Copyright: MAGIC Software Development, 2000-2004
22	!
23	!
24	\* ======================================================================== */
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJCalibration
28	//
29	// Do one calibration loop over serious of runs with the same pulser
30	// colour and the same intensity. The following containers (rectangular) and
31	// tasks (ellipses) are called to produce an MCalibrationChargeCam and to
32	// update the MCalibrationQECam: (MCalibrate is not called from this class)
33	//
34	//Begin_Html
35	/*
36	<img src="images/CalibClasses.gif">
37	*/
38	//End_Html
39	//
40	// Different signal extractors can be set with the command SetExtractor()
41	// Only extractors deriving from MExtractor can be set, default is MExtractSlidingWindow
42	//
43	// Different arrival time extractors can be set with the command SetTimeExtractor()
44	// Only extractors deriving from MExtractTime can be set, default is MExtractTimeSpline
45	//
46	// At the end of the eventloop, plots and results are displayed, depending on
47	// the flags set (see DisplayResult())
48	//
49	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
50	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
51	// Otherwise, (default: SetNormalDisplay()), a good selection of plots is given
52	//
53	// If the flag SetDataCheck() is set, the calibration is used as in the data check at
54	// La Palma, which mean especially running it on raw data files.
55	//
56	// See also: MHCalibrationChargePix, MHCalibrationChargeCam, MHGausEvents
57	// MHCalibrationChargeBlindPix, MHCalibrationChargePINDiode
58	// MCalibrationChargePix, MCalibrationChargeCam, MCalibrationChargeCalc
59	// MCalibrationChargeBlindPix, MCalibrationChargePINDiode,
60	// MCalibrationQECam, MBadPixelsPix, MBadPixelsCam
61	//
62	// If the flag RelTimeCalibration() is set, a calibration of the relative arrival
63	// times is also performed. The following containers (rectangular) and
64	// tasks (ellipses) are called to produce an MCalibrationRelTimeCam used by
65	// MCalibrateTime to correct timing offset between pixels: (MCalibrateTime is not
66	// called from this class)
67	//
68	//Begin_Html
69	/*
70	<img src="images/RelTimeClasses.gif">
71	*/
72	//End_Html
73	//
74	// Different arrival time extractors can be chosen via the command SetArrivalTimeLevel(UInt_t i)
75	// Up to now, the following extractors are available:
76	// i=1: Use MArrivalTimeCalc (using MCubicSpline, arrival time == position at half maximum)
77	// i=2: Use MArrivalTimeCalc2 (mean time of fWindowSize time slices with the highest integral content: default)
78	//
79	// See also: MHCalibrationRelTimePix, MHCalibrationRelTimeCam, MHGausEvents
80	// MCalibrationRelTimePix, MCalibrationRelTimeCam
81	// MBadPixelsPix, MBadPixelsCam
82	//
83	/////////////////////////////////////////////////////////////////////////////
84	#include "MJCalibration.h"
85
86	#include <TFile.h>
87	#include <TStyle.h>
88	#include <TCanvas.h>
89	#include <TSystem.h>
90
91	#include "MLog.h"
92	#include "MLogManip.h"
93
94	#include "MRunIter.h"
95	#include "MParList.h"
96	#include "MTaskList.h"
97	#include "MEvtLoop.h"
98
99	#include "MHCamera.h"
100	#include "MGeomCam.h"
101
102	#include "MPedestalCam.h"
103	#include "MCalibrationCam.h"
104	#include "MCalibrationQECam.h"
105	#include "MCalibrationChargeCam.h"
106	#include "MCalibrationChargePINDiode.h"
107	#include "MCalibrationChargeBlindPix.h"
108	#include "MCalibrationChargeCalc.h"
109
110	#include "MHGausEvents.h"
111	#include "MHCalibrationCam.h"
112	#include "MHCalibrationChargeCam.h"
113	#include "MHCalibrationChargeBlindPix.h"
114	#include "MHCalibrationRelTimeCam.h"
115	#include "MCalibrationRelTimeCam.h"
116	#include "MCalibrationRelTimeCalc.h"
117
118	#include "MReadMarsFile.h"
119	#include "MRawFileRead.h"
120	#include "MGeomApply.h"
121	#include "MBadPixelsMerge.h"
122	#include "MBadPixelsCam.h"
123	#include "MExtractTime.h"
124	#include "MExtractor.h"
125	#include "MExtractPINDiode.h"
126	#include "MExtractBlindPixel.h"
127	#include "MExtractSlidingWindow.h"
128	#include "MExtractTimeSpline.h"
129	#include "MFCosmics.h"
130	#include "MContinue.h"
131	#include "MFillH.h"
132
133	#include "MArrivalTimeCam.h"
134
135	#include "MStatusDisplay.h"
136
137	ClassImp(MJCalibration);
138
139	using namespace std;
140
141	const Int_t MJCalibration::gkIFAEBoxInaugurationRun = 20113;
142	// --------------------------------------------------------------------------
143	//
144	// Default constructor.
145	//
146	// Sets fRuns to 0, fExtractor to NULL, fTimeExtractor to NULL, fColor to kNONE,
147	// fDisplay to kNormalDisplay, fRelTime to kFALSE, fDataCheck to kFALSE
148	//
149	MJCalibration::MJCalibration(const char name, const char title)
150	: fRuns(0), fExtractor(NULL), fTimeExtractor(NULL),
151	fColor(MCalibrationCam::kNONE), fDisplayType(kNormalDisplay),
152	fRelTimes(kFALSE), fDataCheck(kFALSE)
153	{
154	fName = name ? name : "MJCalibration";
155	fTitle = title ? title : "Tool to create the calibration constants for one calibration run";
156
157	}
158
159
160	// --------------------------------------------------------------------------
161	//
162	// Display the results in MStatusDisplay:
163	//
164	// - Add "Calibration" to the MStatusDisplay title
165	// - Retrieve the MGeomCam from MParList
166	// - Initialize the following MHCamera's:
167	// 1) MCalibrationPix::GetMean()
168	// 2) MCalibrationPix::Sigma()
169	// 3) MCalibrationChargePix::GetRSigma()
170	// 4) MCalibrationChargePix::GetRSigmaPerCharge()
171	// 5) MCalibrationChargePix::GetPheFFactorMethod()
172	// 6) MCalibrationChargePix::GetMeanConvFADC2Phe()
173	// 7) MCalibrationChargePix::GetMeanFFactorFADC2Phot()
174	// 8) MCalibrationQEPix::GetQECascadesFFactor()
175	// 9) MCalibrationQEPix::GetQECascadesBlindPixel()
176	// 10) MCalibrationQEPix::GetQECascadesPINDiode()
177	// 11) MCalibrationQEPix::GetQECascadesCombined()
178	// 12) MCalibrationQEPix::IsAverageQEFFactorAvailable()
179	// 13) MCalibrationQEPix::IsAverageQEBlindPixelAvailable()
180	// 14) MCalibrationQEPix::IsAverageQEPINDiodeAvailable()
181	// 15) MCalibrationQEPix::IsAverageQECombinedAvailable()
182	// 16) MCalibrationChargePix::IsHiGainSaturation()
183	// 17) MCalibrationPix::GetHiLoMeansDivided()
184	// 18) MCalibrationPix::GetHiLoSigmasDivided()
185	// 19) MCalibrationChargePix::GetHiGainPickup()
186	// 20) MCalibrationChargePix::GetLoGainPickup()
187	// 21) MCalibrationChargePix::GetHiGainBlackout()
188	// 22) MCalibrationChargePix::GetLoGainBlackout()
189	// 23) MCalibrationPix::IsExcluded()
190	// 24) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnsuitableRun)
191	// 25) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnreliableRun)
192	// 26) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kHiGainOscillating)
193	// 27) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kLoGainOscillating)
194	// 28) MCalibrationChargePix::GetAbsTimeMean()
195	// 29) MCalibrationChargePix::GetAbsTimeRms()
196	//
197	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
198	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
199	// and otherwise, (default: SetNormalDisplay()), a good selection of plots is given
200	//
201	void MJCalibration::DisplayResult(MParList &plist)
202	{
203	if (!fDisplay)
204	return;
205
206	//
207	// Update display
208	//
209	TString title = fDisplay->GetTitle();
210	title += "-- Calibration ";
211	title += fRuns->GetRunsAsString();
212	title += " --";
213	fDisplay->SetTitle(title);
214
215	//
216	// Get container from list
217	//
218	MGeomCam &geomcam = (MGeomCam)plist.FindObject("MGeomCam");
219
220	// Create histograms to display
221	MHCamera disp1 (geomcam, Form("%s%s","Charge",(fRuns->GetRunsAsFileName()).Data()),
222	"Fitted Mean Charges");
223	MHCamera disp2 (geomcam, Form("%s%s","SigmaCharge",(fRuns->GetRunsAsFileName()).Data()),
224	"Sigma of Fitted Charges");
225	MHCamera disp3 (geomcam, Form("%s%s","RSigma",(fRuns->GetRunsAsFileName()).Data()),
226	"Reduced Sigmas");
227	MHCamera disp4 (geomcam, Form("%s%s","RSigmaPerCharge",(fRuns->GetRunsAsFileName()).Data()),
228	"Reduced Sigma per Charge");
229	MHCamera disp5 (geomcam, Form("%s%s","NumPhes",(fRuns->GetRunsAsFileName()).Data()),
230	"Nr. of Phe's (F-Factor Method)");
231	MHCamera disp6 (geomcam, Form("%s%s","ConvFADC2Phes",(fRuns->GetRunsAsFileName()).Data()),
232	"Conversion Factor (F-Factor Method)");
233	MHCamera disp7 (geomcam, Form("%s%s","TotalFFactor",(fRuns->GetRunsAsFileName()).Data()),
234	"Total F-Factor (F-Factor Method)");
235	MHCamera disp8 (geomcam, Form("%s%s","CascadesQEFFactor",(fRuns->GetRunsAsFileName()).Data()),
236	"Cascades QE (F-Factor Method)");
237	MHCamera disp9 (geomcam, Form("%s%s","CascadesQEBlindPix",(fRuns->GetRunsAsFileName()).Data()),
238	"Cascades QE (Blind Pixel Method)");
239	MHCamera disp10(geomcam, Form("%s%s","CascadesQEPINDiode",(fRuns->GetRunsAsFileName()).Data()),
240	"Cascades QE (PIN Diode Method)");
241	MHCamera disp11(geomcam, Form("%s%s","CascadesQECombined",(fRuns->GetRunsAsFileName()).Data()),
242	"Cascades QE (Combined Method)");
243	MHCamera disp12(geomcam, Form("%s%s","FFactorValid",(fRuns->GetRunsAsFileName()).Data()),
244	"Pixels with valid F-Factor calibration");
245	MHCamera disp13(geomcam, Form("%s%s","BlindPixelValid",(fRuns->GetRunsAsFileName()).Data()),
246	"Pixels with valid BlindPixel calibration");
247	MHCamera disp14(geomcam, Form("%s%s","PINdiodeValid",(fRuns->GetRunsAsFileName()).Data()),
248	"Pixels with valid PINDiode calibration");
249	MHCamera disp15(geomcam, Form("%s%s","CombinedValid",(fRuns->GetRunsAsFileName()).Data()),
250	"Pixels with valid Combined calibration");
251	MHCamera disp16(geomcam, Form("%s%s","Saturation",(fRuns->GetRunsAsFileName()).Data()),
252	"Pixels with saturated Hi Gain");
253	MHCamera disp17(geomcam, Form("%s%s","ConversionMeans",(fRuns->GetRunsAsFileName()).Data()),
254	"Conversion HiGain.vs.LoGain Means");
255	MHCamera disp18(geomcam, Form("%s%s","ConversionSigmas",(fRuns->GetRunsAsFileName()).Data()),
256	"Conversion HiGain.vs.LoGain Sigmas");
257	MHCamera disp19(geomcam, Form("%s%s","HiGainPickup",(fRuns->GetRunsAsFileName()).Data()),
258	"Number Pickup events Hi Gain");
259	MHCamera disp20(geomcam, Form("%s%s","LoGainPickup",(fRuns->GetRunsAsFileName()).Data()),
260	"Number Pickup events Lo Gain");
261	MHCamera disp21(geomcam, Form("%s%s","HiGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
262	"Number Blackout events Hi Gain");
263	MHCamera disp22(geomcam, Form("%s%s","LoGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
264	"Number Blackout events Lo Gain");
265	MHCamera disp23(geomcam, Form("%s%s","Excluded",(fRuns->GetRunsAsFileName()).Data()),
266	"Pixels previously excluded");
267	MHCamera disp24(geomcam, Form("%s%s","UnSuitable",(fRuns->GetRunsAsFileName()).Data()),
268	"Pixels not suited for further analysis");
269	MHCamera disp25(geomcam, Form("%s%s","UnReliable",(fRuns->GetRunsAsFileName()).Data()),
270	"Pixels not reliable for further analysis");
271	MHCamera disp26(geomcam, Form("%s%s","HiGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
272	"Oscillating Pixels High Gain");
273	MHCamera disp27(geomcam, Form("%s%s","LoGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
274	"Oscillating Pixels Low Gain");
275	MHCamera disp28(geomcam, Form("%s%s","AbsTimeMean",(fRuns->GetRunsAsFileName()).Data()),
276	"Abs. Arrival Times");
277	MHCamera disp29(geomcam, Form("%s%s","AbsTimeRms",(fRuns->GetRunsAsFileName()).Data()),
278	"RMS of Arrival Times");
279	MHCamera disp30(geomcam, Form("%s%s","MeanTime",(fRuns->GetRunsAsFileName()).Data()),
280	"Mean Rel. Arrival Times");
281	MHCamera disp31(geomcam, Form("%s%s","SigmaTime",(fRuns->GetRunsAsFileName()).Data()),
282	"Sigma Rel. Arrival Times");
283	MHCamera disp32(geomcam, Form("%s%s","TimeProb",(fRuns->GetRunsAsFileName()).Data()),
284	"Probability of Time Fit");
285	MHCamera disp33(geomcam, Form("%s%s","TimeNotFitValid",(fRuns->GetRunsAsFileName()).Data()),
286	"Pixels with not valid fit results");
287	MHCamera disp34(geomcam, Form("%s%s","TimeOscillating",(fRuns->GetRunsAsFileName()).Data()),
288	"Oscillating Pixels");
289
290	// Fitted charge means and sigmas
291	disp1.SetCamContent(fCalibrationCam, 0);
292	disp1.SetCamError( fCalibrationCam, 1);
293	disp2.SetCamContent(fCalibrationCam, 2);
294	disp2.SetCamError( fCalibrationCam, 3);
295
296	// Reduced Sigmas and reduced sigmas per charge
297	disp3.SetCamContent(fCalibrationCam, 5);
298	disp3.SetCamError( fCalibrationCam, 6);
299	disp4.SetCamContent(fCalibrationCam, 7);
300	disp4.SetCamError( fCalibrationCam, 8);
301
302	// F-Factor Method
303	disp5.SetCamContent(fCalibrationCam, 9);
304	disp5.SetCamError( fCalibrationCam, 10);
305	disp6.SetCamContent(fCalibrationCam, 11);
306	disp6.SetCamError( fCalibrationCam, 12);
307	disp7.SetCamContent(fCalibrationCam, 13);
308	disp7.SetCamError( fCalibrationCam, 14);
309
310	// Quantum Efficiencies
311	disp8.SetCamContent (fQECam, 0 );
312	disp8.SetCamError (fQECam, 1 );
313	disp9.SetCamContent (fQECam, 2 );
314	disp9.SetCamError (fQECam, 3 );
315	disp10.SetCamContent(fQECam, 4 );
316	disp10.SetCamError (fQECam, 5 );
317	disp11.SetCamContent(fQECam, 6 );
318	disp11.SetCamError (fQECam, 7 );
319
320	// Valid flags
321	disp12.SetCamContent(fQECam, 8 );
322	disp13.SetCamContent(fQECam, 9 );
323	disp14.SetCamContent(fQECam, 10);
324	disp15.SetCamContent(fQECam, 11);
325
326	// Conversion Hi-Lo
327	disp16.SetCamContent(fCalibrationCam, 25);
328	disp17.SetCamContent(fCalibrationCam, 16);
329	disp17.SetCamError (fCalibrationCam, 17);
330	disp18.SetCamContent(fCalibrationCam, 18);
331	disp18.SetCamError (fCalibrationCam, 19);
332
333	// Pickup and Blackout
334	disp19.SetCamContent(fCalibrationCam, 21);
335	disp20.SetCamContent(fCalibrationCam, 22);
336	disp21.SetCamContent(fCalibrationCam, 23);
337	disp22.SetCamContent(fCalibrationCam, 24);
338
339	// Pixels with defects
340	disp23.SetCamContent(fCalibrationCam, 20);
341	disp24.SetCamContent(fBadPixels, 1);
342	disp25.SetCamContent(fBadPixels, 3);
343
344	// Oscillations
345	disp26.SetCamContent(fBadPixels, 10);
346	disp27.SetCamContent(fBadPixels, 11);
347
348	// Arrival Times
349	disp28.SetCamContent(fCalibrationCam, 26);
350	disp28.SetCamError( fCalibrationCam, 27);
351	disp29.SetCamContent(fCalibrationCam, 27);
352
353	disp1.SetYTitle("Q [FADC counts]");
354	disp2.SetYTitle("\\sigma_{Q} [FADC counts]");
355
356	disp3.SetYTitle("\\sqrt{\\sigma^{2}_{Q} - RMS^{2}_{Ped}} [FADC Counts]");
357	disp4.SetYTitle("Red.Sigma/<Q> [1]");
358
359	disp5.SetYTitle("Nr. Phe's [1]");
360	disp6.SetYTitle("Conv.Factor [PhE/FADC counts]");
361	disp7.SetYTitle("Total F-Factor [1]");
362
363	disp8.SetYTitle("QE [1]");
364	disp9.SetYTitle("QE [1]");
365	disp10.SetYTitle("QE [1]");
366	disp11.SetYTitle("QE [1]");
367
368	disp12.SetYTitle("[1]");
369	disp13.SetYTitle("[1]");
370	disp14.SetYTitle("[1]");
371	disp15.SetYTitle("[1]");
372	disp16.SetYTitle("[1]");
373
374	disp17.SetYTitle("<Q>(High)/<Q>(Low) [1]");
375	disp18.SetYTitle("\\sigma_{Q}(High)/\\sigma_{Q}(Low) [1]");
376
377	disp19.SetYTitle("[1]");
378	disp20.SetYTitle("[1]");
379	disp21.SetYTitle("[1]");
380	disp22.SetYTitle("[1]");
381	disp23.SetYTitle("[1]");
382	disp24.SetYTitle("[1]");
383	disp25.SetYTitle("[1]");
384	disp26.SetYTitle("[1]");
385	disp27.SetYTitle("[1]");
386
387	disp28.SetYTitle("Mean Abs. Time [FADC slice]");
388	disp29.SetYTitle("RMS Abs. Time [FADC slices]");
389
390	if (fRelTimes)
391	{
392
393	disp30.SetCamContent(fRelTimeCam,0);
394	disp30.SetCamError( fRelTimeCam,1);
395	disp31.SetCamContent(fRelTimeCam,2);
396	disp31.SetCamError( fRelTimeCam,3);
397	disp32.SetCamContent(fRelTimeCam,4);
398	disp33.SetCamContent(fBadPixels,20);
399	disp34.SetCamContent(fBadPixels,21);
400
401	disp30.SetYTitle("Time Offset [FADC units]");
402	disp31.SetYTitle("Timing resolution [FADC units]");
403	disp32.SetYTitle("P_{Time} [1]");
404	disp33.SetYTitle("[1]");
405	disp34.SetYTitle("[1]");
406	}
407
408	if (fDisplayType == kDataCheckDisplay)
409	{
410	TCanvas &c1 = fDisplay->AddTab("Fit.Charge");
411	c1.Divide(3, 3);
412
413	CamDraw(c1, 1, 3, disp1, 2);
414	CamDraw(c1, 2, 3, disp4, 2);
415	CamDraw(c1, 3, 3, disp28, 2);
416
417	// F-Factor
418	TCanvas &c2 = fDisplay->AddTab("Phe's");
419	c2.Divide(3,4);
420
421	CamDraw(c2, 1, 3, disp6, 2, 1);
422	CamDraw(c2, 2, 3, disp7, 2, 1);
423	CamDraw(c2, 3, 3, disp8, 2, 1);
424
425	// QE's
426	TCanvas &c3 = fDisplay->AddTab("QE's");
427	c3.Divide(3,4);
428
429	CamDraw(c3, 1, 3, disp8, 2, 1);
430	CamDraw(c3, 2, 3, disp9, 2, 1);
431	CamDraw(c3, 3, 3, disp10, 2, 1);
432
433	// Defects
434	TCanvas &c4 = fDisplay->AddTab("Defect");
435	// c4.Divide(3,2);
436	c4.Divide(2,2);
437
438	// CamDraw(c4, 1, 3, disp23, 0);
439	// CamDraw(c4, 2, 3, disp24, 0);
440	// CamDraw(c4, 3, 3, disp25, 0);
441	CamDraw(c4, 1, 2, disp24, 0);
442	CamDraw(c4, 2, 2, disp25, 0);
443
444	if (fRelTimes)
445	{
446	// Rel. Times
447	TCanvas &c5 = fDisplay->AddTab("Rel. Times");
448	c5.Divide(2,4);
449
450	CamDraw(c5, 1, 2, disp30, 2);
451	CamDraw(c5, 2, 2, disp31, 2);
452	}
453
454
455	return;
456	}
457
458	if (fDisplayType == kNormalDisplay)
459	{
460
461	// Charges
462	TCanvas &c11 = fDisplay->AddTab("Fit.Charge");
463	c11.Divide(2, 4);
464
465	CamDraw(c11, 1, 2, disp1, 5, 1);
466	CamDraw(c11, 2, 2, disp2, 5, 1);
467
468	// Reduced Sigmas
469	TCanvas &c12 = fDisplay->AddTab("Red.Sigma");
470	c12.Divide(2,4);
471
472	CamDraw(c12, 1, 2, disp3, 5, 1);
473	CamDraw(c12, 2, 2, disp4, 5, 1);
474
475	// F-Factor
476	TCanvas &c13 = fDisplay->AddTab("Phe's");
477	c13.Divide(3,4);
478
479	CamDraw(c13, 1, 3, disp5, 5, 1);
480	CamDraw(c13, 2, 3, disp6, 5, 1);
481	CamDraw(c13, 3, 3, disp7, 5, 1);
482
483	// QE's
484	TCanvas &c14 = fDisplay->AddTab("QE's");
485	c14.Divide(4,4);
486
487	CamDraw(c14, 1, 4, disp8, 5, 1);
488	CamDraw(c14, 2, 4, disp9, 5, 1);
489	CamDraw(c14, 3, 4, disp10, 5, 1);
490	CamDraw(c14, 4, 4, disp11, 5, 1);
491
492	// Defects
493	TCanvas &c15 = fDisplay->AddTab("Defect");
494	// c15.Divide(5,2);
495	c15.Divide(4,2);
496
497	/*
498	CamDraw(c15, 1, 5, disp23, 0);
499	CamDraw(c15, 2, 5, disp24, 0);
500	CamDraw(c15, 3, 5, disp25, 0);
501	CamDraw(c15, 4, 5, disp26, 0);
502	CamDraw(c15, 5, 5, disp27, 0);
503	*/
504	CamDraw(c15, 1, 4, disp24, 0);
505	CamDraw(c15, 2, 4, disp25, 0);
506	CamDraw(c15, 3, 4, disp26, 0);
507	CamDraw(c15, 4, 4, disp27, 0);
508
509	// Abs. Times
510	TCanvas &c16 = fDisplay->AddTab("Abs. Times");
511	c16.Divide(2,3);
512
513	CamDraw(c16, 1, 2, disp28, 5);
514	CamDraw(c16, 2, 2, disp29, 5);
515
516	if (fRelTimes)
517	{
518	// Rel. Times
519	TCanvas &c17 = fDisplay->AddTab("Rel. Times");
520	c17.Divide(2,4);
521
522	CamDraw(c17, 1, 2, disp30, 5, 1);
523	CamDraw(c17, 2, 2, disp31, 5, 1);
524	}
525
526	return;
527	}
528
529	if (fDisplayType == kFullDisplay)
530	{
531
532	MHCalibrationChargeBlindPix blind = (MHCalibrationChargeBlindPix)plist.FindObject("MHCalibrationChargeBlindPix");
533	blind->DrawClone();
534	gPad->GetCanvas()->SaveAs(Form("%s%s%s",blind->GetName(),(fRuns->GetRunsAsString()).Data(),".root"));
535
536	MHCalibrationChargeCam ccm = (MHCalibrationChargeCam)plist.FindObject("MHCalibrationChargeCam");
537	ccm->DrawClone();
538	gPad->GetCanvas()->SaveAs(Form("%s%s%s",ccm->GetName(),(fRuns->GetRunsAsString()).Data(),".root"));
539
540	MHCalibrationRelTimeCam rel = (MHCalibrationRelTimeCam)plist.FindObject("MHCalibrationRelTimeCam");
541	rel->DrawClone();
542	gPad->GetCanvas()->SaveAs(Form("%s%s%s",rel->GetName(),(fRuns->GetRunsAsString()).Data(),".root"));
543
544	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationChargeCam");
545
546	for (Int_t aidx=0;aidx<cam->GetAverageAreas();aidx++)
547	{
548	cam->GetAverageHiGainArea(aidx).DrawClone("all");
549	cam->GetAverageLoGainArea(aidx).DrawClone("all");
550	}
551
552	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
553	{
554	cam->GetAverageHiGainSector(sector).DrawClone("all");
555	cam->GetAverageLoGainSector(sector).DrawClone("all");
556	}
557
558	// Charges
559	TCanvas &c21 = fDisplay->AddTab("Fit.Charge");
560	c21.Divide(2, 4);
561
562	CamDraw(c21, 1, 2, disp1, 2, 1);
563	CamDraw(c21, 2, 2, disp2, 2, 1);
564
565	// Reduced Sigmas
566	TCanvas &c23 = fDisplay->AddTab("Red.Sigma");
567	c23.Divide(2,4);
568
569	CamDraw(c23, 1, 2, disp3, 2, 1);
570	CamDraw(c23, 2, 2, disp4, 2, 1);
571
572	// F-Factor
573	TCanvas &c24 = fDisplay->AddTab("Phe's");
574	c24.Divide(3,4);
575
576	CamDraw(c24, 1, 3, disp5, 2, 1);
577	CamDraw(c24, 2, 3, disp6, 2, 1);
578	CamDraw(c24, 3, 3, disp7, 2, 1);
579
580	// QE's
581	TCanvas &c25 = fDisplay->AddTab("QE's");
582	c25.Divide(4,4);
583
584	CamDraw(c25, 1, 4, disp8, 2, 1);
585	CamDraw(c25, 2, 4, disp9, 2, 1);
586	CamDraw(c25, 3, 4, disp10, 2, 1);
587	CamDraw(c25, 4, 4, disp11, 2, 1);
588
589	// Validity
590	TCanvas &c26 = fDisplay->AddTab("Valid");
591	c26.Divide(4,2);
592
593	CamDraw(c26, 1, 4, disp12, 0);
594	CamDraw(c26, 2, 4, disp13, 0);
595	CamDraw(c26, 3, 4, disp14, 0);
596	CamDraw(c26, 4, 4, disp15, 0);
597
598	// Other info
599	TCanvas &c27 = fDisplay->AddTab("HiLoGain");
600	c27.Divide(3,3);
601
602	CamDraw(c27, 1, 3, disp16, 0);
603	CamDraw(c27, 2, 3, disp17, 1);
604	CamDraw(c27, 3, 3, disp18, 1);
605
606	// Pickup
607	TCanvas &c28 = fDisplay->AddTab("Pickup");
608	c28.Divide(4,2);
609
610	CamDraw(c28, 1, 4, disp19, 0);
611	CamDraw(c28, 2, 4, disp20, 0);
612	CamDraw(c28, 3, 4, disp21, 0);
613	CamDraw(c28, 4, 4, disp22, 0);
614
615	// Defects
616	TCanvas &c29 = fDisplay->AddTab("Defect");
617	// c29.Divide(5,2);
618	c29.Divide(4,2);
619
620	CamDraw(c29, 1, 4, disp24, 0);
621	CamDraw(c29, 2, 4, disp25, 0);
622	CamDraw(c29, 3, 4, disp26, 0);
623	CamDraw(c29, 4, 4, disp27, 0);
624
625	// Abs. Times
626	TCanvas &c30 = fDisplay->AddTab("Abs. Times");
627	c30.Divide(2,3);
628
629	CamDraw(c30, 1, 2, disp28, 2);
630	CamDraw(c30, 2, 2, disp29, 1);
631
632	if (fRelTimes)
633	{
634	// Rel. Times
635	TCanvas &c31 = fDisplay->AddTab("Rel. Times");
636	c31.Divide(3,4);
637
638	CamDraw(c31, 1, 3, disp30, 2, 1);
639	CamDraw(c31, 2, 3, disp31, 2, 1);
640	CamDraw(c31, 3, 3, disp32, 4, 1);
641
642	// Time Defects
643	TCanvas &c32 = fDisplay->AddTab("Time Def.");
644	c32.Divide(2,2);
645
646	CamDraw(c32, 1, 2, disp33,0);
647	CamDraw(c32, 2, 2, disp34,0);
648
649	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationRelTimeCam");
650
651	for (Int_t aidx=0;aidx<cam->GetAverageAreas();aidx++)
652	{
653	cam->GetAverageHiGainArea(aidx).DrawClone("fourierevents");
654	cam->GetAverageLoGainArea(aidx).DrawClone("fourierevents");
655	}
656
657	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
658	{
659	cam->GetAverageHiGainSector(sector).DrawClone("fourierevents");
660	cam->GetAverageLoGainSector(sector).DrawClone("fourierevents");
661	}
662
663	}
664
665	return;
666	}
667	}
668
669
670
671	// --------------------------------------------------------------------------
672	//
673	// Find the colour of the pulsing LED:
674	// - If the run number is smaller than gkIFAEBoxInaugurationRun, take MCalibrationCam::kCT1
675	// - Otherwise find the colour out of the run name
676	// - If no colour is found, return kFALSE
677	//
678	Bool_t MJCalibration::FindColor()
679	{
680
681	const UInt_t nruns = fRuns->GetNumRuns();
682
683	if (nruns == 0)
684	return kFALSE;
685
686	TArrayI arr = fRuns->GetRuns();
687
688	if (arr[nruns-1] < gkIFAEBoxInaugurationRun)
689	{
690	*fLog << "Found colour kCT1 in runs: " << fRuns->GetRunsAsString() << endl;
691	fColor = MCalibrationCam::kCT1;
692	return kTRUE;
693	}
694
695	TString filenames;
696
697	while (!(filenames=((MDirIter*)fRuns)->Next()).IsNull())
698	{
699
700	filenames.ToLower();
701
702	//
703	// Here starts the list of runs where the shifters did not put
704	// a colour, but which have been found out by other means
705	//
706	if (filenames.Contains("_20660_"))
707	if (fColor == MCalibrationCam::kNONE)
708	{
709	*fLog << "Found colour: kGREEN in " << filenames << endl;
710	fColor = MCalibrationCam::kGREEN;
711	}
712	else if (fColor != MCalibrationCam::kGREEN)
713	{
714	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
715	return kFALSE;
716	}
717
718	if (filenames.Contains("_20661_"))
719	if (fColor == MCalibrationCam::kNONE)
720	{
721	*fLog << "Found colour: kGREEN in " << filenames << endl;
722	fColor = MCalibrationCam::kGREEN;
723	}
724	else if (fColor != MCalibrationCam::kGREEN)
725	{
726	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
727	return kFALSE;
728	}
729
730	//
731	// Here start the runs where the shifter put
732	// the colour
733	//
734	if (filenames.Contains("green"))
735	if (fColor == MCalibrationCam::kNONE)
736	{
737	*fLog << "Found colour: kGREEN in " << filenames << endl;
738	fColor = MCalibrationCam::kGREEN;
739	}
740	else if (fColor != MCalibrationCam::kGREEN)
741	{
742	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
743	return kFALSE;
744	}
745
746	if (filenames.Contains("blue"))
747	if (fColor == MCalibrationCam::kNONE)
748	{
749	*fLog << "Found colour: kBLUE in " << filenames << endl;
750	fColor = MCalibrationCam::kBLUE;
751	}
752	else if (fColor != MCalibrationCam::kBLUE)
753	{
754	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
755	return kFALSE;
756	}
757
758	if (filenames.Contains("uv"))
759	if (fColor == MCalibrationCam::kNONE)
760	{
761	*fLog << "Found colour: kUV in " << filenames << endl;
762	fColor = MCalibrationCam::kUV;
763	}
764	else if (fColor != MCalibrationCam::kUV)
765	{
766	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
767	return kFALSE;
768	}
769
770	if (filenames.Contains("ct1"))
771	if (fColor == MCalibrationCam::kNONE)
772	{
773	*fLog << "Found colour: kCT1 in " << filenames << endl;
774	fColor = MCalibrationCam::kCT1;
775	}
776	else if (fColor != MCalibrationCam::kCT1)
777	{
778	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
779	return kFALSE;
780	}
781
782	}
783
784	if (fColor == MCalibrationCam::kNONE)
785	{
786	*fLog << "No colour found in filenames of runs: " << fRuns->GetRunsAsString()
787	<< "... abort" << endl;
788	return kFALSE;
789	}
790
791	return kTRUE;
792	}
793
794
795
796
797	// --------------------------------------------------------------------------
798	//
799	// Retrieve the output file written by WriteResult()
800	//
801	TString MJCalibration::GetOutputFile() const
802	{
803	if (!fRuns)
804	return "";
805
806	return Form("%s/%s-F1.root", (const char)fOutputPath, (const char)fRuns->GetRunsAsFileName());
807	}
808
809
810	// --------------------------------------------------------------------------
811	//
812	// Call the ProcessFile(MPedestalCam)
813	//
814	Bool_t MJCalibration::Process(MPedestalCam &pedcam)
815	{
816	if (!ReadCalibrationCam())
817	return ProcessFile(pedcam);
818
819	return kTRUE;
820	}
821
822	// --------------------------------------------------------------------------
823	//
824	// Execute the task list and the eventloop:
825	//
826	// - Check if there are fRuns, otherwise return
827	// - Check the colour of the files in fRuns (FindColor()), otherwise return
828	// - Check for consistency between run numbers and number of files
829	// - Add fRuns to MReadMarsFile
830	// - Put into MParList:
831	// 1) MPedestalCam (pedcam)
832	// 2) MCalibrationQECam (fQECam)
833	// 3) MCalibrationChargeCam (fCalibrationCam)
834	// 4) MCalibrationRelTimeCam (fRelTimeCam) (only if flag fRelTimes is chosen)
835	// 5) MBadPixelsCam (fBadPixels)
836	// 6) MCalibrationChargePINDiode
837	// 7) MCalibrationChargeBlindPix
838	// - Put into the MTaskList:
839	// 1) MReadMarsFile
840	// 2) MBadPixelsMerge
841	// 3) MGeomApply
842	// 4) MExtractor
843	// 5) MExtractPINDiode
844	// 6) MExtractBlindPixel
845	// 7) MExtractTime (only if flag fRelTimes is chosen)
846	// 8) MContinue(MFCosmics)
847	// 9) MFillH("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode")
848	// 10) MFillH("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel")
849	// 11) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
850	// 12) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
851	// 13) MCalibrationChargeCalc
852	// 14) MFillH("MHCalibrationRelTimeCam", "MArrivalTimeCam") (only if flag fRelTimes is chosen)
853	// 15) MCalibrationRelTimeCalc
854	// - Execute MEvtLoop
855	// - DisplayResult()
856	// - WriteResult()
857	//
858	Bool_t MJCalibration::ProcessFile(MPedestalCam &pedcam)
859	{
860	if (!fRuns)
861	{
862	*fLog << err << "No Runs choosen... abort." << endl;
863	return kFALSE;
864	}
865
866	if (fRuns->GetNumRuns() != fRuns->GetNumEntries())
867	{
868	*fLog << err << "Number of files found doesn't match number of runs... abort."
869	<< fRuns->GetNumRuns() << " vs. " << fRuns->GetNumEntries() << endl;
870	return kFALSE;
871	}
872
873	*fLog << inf;
874	fLog->Separator(GetDescriptor());
875
876	if (!FindColor())
877	return kFALSE;
878
879	*fLog << "Calculate MCalibrationCam from Runs " << fRuns->GetRunsAsString() << endl;
880	*fLog << endl;
881
882	// Setup Tasklist
883	MParList plist;
884	MTaskList tlist;
885	plist.AddToList(&tlist);
886
887	MReadMarsFile read("Events");
888	MRawFileRead rawread("");
889
890	if (fDataCheck)
891	{
892	// rawread.AddFiles(*fRuns);
893	tlist.AddToList(&rawread);
894	}
895	else
896	{
897	read.DisableAutoScheme();
898	static_cast<MRead&>(read).AddFiles(*fRuns);
899	tlist.AddToList(&read);
900	}
901
902	MCalibrationChargePINDiode pindiode;
903	MCalibrationChargeBlindPix blindpix;
904
905	plist.AddToList(&pedcam);
906	plist.AddToList(&fBadPixels);
907	plist.AddToList(&fQECam);
908	plist.AddToList(&fCalibrationCam);
909	plist.AddToList(&fRelTimeCam);
910	plist.AddToList(&pindiode);
911	plist.AddToList(&blindpix);
912
913	MGeomApply apply;
914	// MBadPixelsMerge merge(&fBadPixels);
915	MExtractPINDiode pinext;
916	MExtractBlindPixel blindext;
917	MExtractSlidingWindow extract2;
918	MExtractTimeSpline timespline;
919	MCalibrationChargeCalc calcalc;
920	MCalibrationRelTimeCalc timecalc;
921
922	//
923	// As long as there are no DM's, have to colour by hand
924	//
925	calcalc.SetPulserColor(fColor);
926
927	MFillH fillpin("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode");
928	MFillH fillbnd("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel");
929	MFillH fillcam("MHCalibrationChargeCam", "MExtractedSignalCam");
930	MFillH filltme("MHCalibrationRelTimeCam", "MArrivalTimeCam");
931	fillpin.SetNameTab("PINDiode");
932	fillbnd.SetNameTab("BlindPix");
933	fillcam.SetNameTab("Charge");
934	filltme.SetNameTab("RelTimes");
935
936
937	//
938	// Apply a filter against cosmics
939	// (will have to be needed in the future
940	// when the calibration hardware-trigger is working)
941	//
942	MFCosmics cosmics;
943	MContinue cont(&cosmics);
944
945	// tlist.AddToList(&merge);
946	tlist.AddToList(&apply);
947
948	if (fExtractor)
949	tlist.AddToList(fExtractor);
950	else
951	{
952	*fLog << warn << GetDescriptor()
953	<< ": No extractor has been chosen, take default MExtractSlidingWindow " << endl;
954	tlist.AddToList(&extract2);
955	}
956
957
958	tlist.AddToList(&pinext);
959	tlist.AddToList(&blindext);
960
961	if (fRelTimes)
962	{
963	if (fTimeExtractor)
964	tlist.AddToList(fTimeExtractor);
965	else
966	{
967	*fLog << warn << GetDescriptor()
968	<< ": No extractor has been chosen, take default MTimeExtractSpline " << endl;
969	tlist.AddToList(&timespline);
970	}
971	}
972
973	tlist.AddToList(&cont);
974	tlist.AddToList(&fillcam);
975	tlist.AddToList(&fillpin);
976	tlist.AddToList(&fillbnd);
977	tlist.AddToList(&calcalc);
978
979	if (fRelTimes)
980	{
981	tlist.AddToList(&filltme);
982	tlist.AddToList(&timecalc);
983	}
984
985
986	// Create and setup the eventloop
987	MEvtLoop evtloop(fName);
988	evtloop.SetParList(&plist);
989	evtloop.SetDisplay(fDisplay);
990	evtloop.SetLogStream(fLog);
991
992	// Execute first analysis
993	if (!evtloop.Eventloop())
994	{
995	*fLog << err << GetDescriptor() << ": Failed." << endl;
996	return kFALSE;
997	}
998
999	tlist.PrintStatistics();
1000
1001	DisplayResult(plist);
1002
1003	if (!WriteResult())
1004	return kFALSE;
1005
1006	*fLog << inf << GetDescriptor() << ": Done." << endl;
1007
1008	return kTRUE;
1009	}
1010
1011	// --------------------------------------------------------------------------
1012	//
1013	// Read the following containers from GetOutputFile()
1014	// - MCalibrationChargeCam
1015	// - MCalibrationQECam
1016	// - MBadPixelsCam
1017	//
1018	Bool_t MJCalibration::ReadCalibrationCam()
1019	{
1020	const TString fname = GetOutputFile();
1021
1022	if (gSystem->AccessPathName(fname, kFileExists))
1023	{
1024	*fLog << err << "Input file " << fname << " doesn't exist." << endl;
1025	return kFALSE;
1026	}
1027
1028	*fLog << inf << "Reading from file: " << fname << endl;
1029
1030	TFile file(fname, "READ");
1031	if (fCalibrationCam.Read()<=0)
1032	{
1033	*fLog << err << "Unable to read MCalibrationChargeCam from " << fname << endl;
1034	return kFALSE;
1035	}
1036
1037	if (fQECam.Read()<=0)
1038	{
1039	*fLog << err << "Unable to read MCalibrationQECam from " << fname << endl;
1040	return kFALSE;
1041	}
1042
1043	if (fRelTimeCam.Read()<=0)
1044	{
1045	*fLog << err << "Unable to read MCalibrationRelTimeCam from " << fname << endl;
1046	return kFALSE;
1047	}
1048
1049	if (file.FindKey("MBadPixelsCam"))
1050	{
1051	MBadPixelsCam bad;
1052	if (bad.Read()<=0)
1053	{
1054	*fLog << err << "Unable to read MBadPixelsCam from " << fname << endl;
1055	return kFALSE;
1056	}
1057	fBadPixels.Merge(bad);
1058	}
1059
1060	if (fDisplay /&& !fDisplay->GetCanvas("Pedestals")/) // FIXME!
1061	fDisplay->Read();
1062
1063	return kTRUE;
1064	}
1065
1066
1067	// --------------------------------------------------------------------------
1068	//
1069	// Set the path for output files, written by WriteResult()
1070	//
1071	void MJCalibration::SetOutputPath(const char *path)
1072	{
1073	fOutputPath = path;
1074	if (fOutputPath.EndsWith("/"))
1075	fOutputPath = fOutputPath(0, fOutputPath.Length()-1);
1076	}
1077
1078
1079	// --------------------------------------------------------------------------
1080	//
1081	// Write the result into the output file GetOutputFile(), if fOutputPath exists.
1082	//
1083	// The following containers are written:
1084	// - MStatusDisplay
1085	// - MCalibrationChargeCam
1086	// - MCalibrationQECam
1087	// - MBadPixelsCam
1088	//
1089	Bool_t MJCalibration::WriteResult()
1090	{
1091	if (fOutputPath.IsNull())
1092	return kTRUE;
1093
1094	const TString oname(GetOutputFile());
1095
1096	*fLog << inf << "Writing to file: " << oname << endl;
1097
1098	TFile file(oname, "UPDATE");
1099
1100	if (fDisplay && fDisplay->Write()<=0)
1101	{
1102	*fLog << err << "Unable to write MStatusDisplay to " << oname << endl;
1103	return kFALSE;
1104	}
1105
1106	if (fCalibrationCam.Write()<=0)
1107	{
1108	*fLog << err << "Unable to write MCalibrationChargeCam to " << oname << endl;
1109	return kFALSE;
1110	}
1111
1112	if (fQECam.Write()<=0)
1113	{
1114	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1115	return kFALSE;
1116	}
1117
1118	if (fRelTimes)
1119	if (fRelTimeCam.Write()<=0)
1120	{
1121	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1122	return kFALSE;
1123	}
1124
1125	if (fBadPixels.Write()<=0)
1126	{
1127	*fLog << err << "Unable to write MBadPixelsCam to " << oname << endl;
1128	return kFALSE;
1129	}
1130
1131	return kTRUE;
1132
1133	}
1134
1135
1136
1137
1138
1139
1140

Note: See TracBrowser for help on using the repository browser.

Download in other formats: