Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJCalibration.cc@ 4298

Visit:

Last change on this file since 4298 was 4285, checked in by gaug, 21 years ago
* empty log message *
File size: 40.2 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
19	! Markus Gaug, 02/2004 <mailto:markus@ifae.es>
20	!
21	! Copyright: MAGIC Software Development, 2000-2004
22	!
23	!
24	\* ======================================================================== */
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJCalibration
28	//
29	// Do one calibration loop over serious of runs with the same pulser
30	// colour and the same intensity. The following containers (rectangular) and
31	// tasks (ellipses) are called to produce an MCalibrationChargeCam and to
32	// update the MCalibrationQECam: (MCalibrate is not called from this class)
33	//
34	//Begin_Html
35	/*
36	<img src="images/CalibClasses.gif">
37	*/
38	//End_Html
39	//
40	// Different signal extractors can be set with the command SetExtractor()
41	// Only extractors deriving from MExtractor can be set, default is MExtractSlidingWindow
42	//
43	// Different arrival time extractors can be set with the command SetTimeExtractor()
44	// Only extractors deriving from MExtractTime can be set, default is MExtractTimeSpline
45	//
46	// At the end of the eventloop, plots and results are displayed, depending on
47	// the flags set (see DisplayResult())
48	//
49	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
50	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
51	// Otherwise, (default: SetNormalDisplay()), a good selection of plots is given
52	//
53	// If the flag SetDataCheck() is set, the calibration is used as in the data check at
54	// La Palma, which mean especially running on raw data files.
55	//
56	// The absolute light calibration devices Blind Pixel and PIN Diode can be switched on
57	// and off with the commands:
58	//
59	// - SetUseBlindPixel(Bool_t )
60	// - SetUsePINDiode(Bool_t )
61	//
62	// See also: MHCalibrationChargePix, MHCalibrationChargeCam, MHGausEvents
63	// MHCalibrationChargeBlindPix, MHCalibrationChargePINDiode
64	// MCalibrationChargePix, MCalibrationChargeCam, MCalibrationChargeCalc
65	// MCalibrationChargeBlindPix, MCalibrationChargePINDiode,
66	// MCalibrationQECam, MBadPixelsPix, MBadPixelsCam
67	//
68	// If the flag RelTimeCalibration() is set, a calibration of the relative arrival
69	// times is also performed. The following containers (rectangular) and
70	// tasks (ellipses) are called to produce an MCalibrationRelTimeCam used by
71	// MCalibrateTime to correct timing offset between pixels: (MCalibrateTime is not
72	// called from this class)
73	//
74	//Begin_Html
75	/*
76	<img src="images/RelTimeClasses.gif">
77	*/
78	//End_Html
79	//
80	// Different arrival time extractors can be set directly with the command SetTimeExtractor(MExtractor *)
81	//
82	// See also: MHCalibrationRelTimePix, MHCalibrationRelTimeCam, MHGausEvents
83	// MCalibrationRelTimePix, MCalibrationRelTimeCam
84	// MBadPixelsPix, MBadPixelsCam
85	//
86	/////////////////////////////////////////////////////////////////////////////
87	#include "MJCalibration.h"
88
89	#include <TFile.h>
90	#include <TStyle.h>
91	#include <TCanvas.h>
92	#include <TSystem.h>
93
94	#include "MLog.h"
95	#include "MLogManip.h"
96
97	#include "MRunIter.h"
98	#include "MParList.h"
99	#include "MTaskList.h"
100	#include "MEvtLoop.h"
101
102	#include "MHCamera.h"
103	#include "MGeomCam.h"
104
105	#include "MPedestalCam.h"
106	#include "MCalibrationCam.h"
107	#include "MCalibrationQECam.h"
108	#include "MCalibrationChargeCam.h"
109	#include "MCalibrationChargePINDiode.h"
110	#include "MCalibrationChargeBlindPix.h"
111	#include "MCalibrationChargeCalc.h"
112
113	#include "MHGausEvents.h"
114	#include "MHCalibrationCam.h"
115	#include "MHCalibrationChargeCam.h"
116	#include "MHCalibrationChargeBlindPix.h"
117	#include "MHCalibrationRelTimeCam.h"
118	#include "MCalibrationRelTimeCam.h"
119	#include "MCalibrationRelTimeCalc.h"
120
121	#include "MReadMarsFile.h"
122	#include "MRawFileRead.h"
123	#include "MGeomApply.h"
124	#include "MBadPixelsMerge.h"
125	#include "MBadPixelsCam.h"
126	#include "MExtractTime.h"
127	#include "MExtractor.h"
128	#include "MExtractPINDiode.h"
129	#include "MExtractBlindPixel.h"
130	#include "MExtractSlidingWindow.h"
131	#include "MExtractTimeSpline.h"
132	#include "MFCosmics.h"
133	#include "MContinue.h"
134	#include "MFillH.h"
135
136	#include "MArrivalTimeCam.h"
137
138	#include "MStatusDisplay.h"
139
140	ClassImp(MJCalibration);
141
142	using namespace std;
143
144	const Int_t MJCalibration::gkIFAEBoxInaugurationRun = 20113;
145	// --------------------------------------------------------------------------
146	//
147	// Default constructor.
148	//
149	// - Sets fRuns to 0, fExtractor to NULL, fTimeExtractor to NULL, fColor to kNONE,
150	// fDisplay to kNormalDisplay, fRelTime to kFALSE, fDataCheck to kFALSE,
151	// - SetUseBlindPixel()
152	// - SetUsePINDiode()
153	//
154	MJCalibration::MJCalibration(const char name, const char title)
155	: fRuns(0), fExtractor(NULL), fTimeExtractor(NULL),
156	fColor(MCalibrationCam::kNONE), fDisplayType(kNormalDisplay),
157	fRelTimes(kFALSE), fDataCheck(kFALSE)
158	{
159
160	fName = name ? name : "MJCalibration";
161	fTitle = title ? title : "Tool to create the calibration constants for one calibration run";
162
163	SetUseBlindPixel();
164	SetUsePINDiode();
165
166	}
167
168
169	// --------------------------------------------------------------------------
170	//
171	// Display the results in MStatusDisplay:
172	//
173	// - Add "Calibration" to the MStatusDisplay title
174	// - Retrieve the MGeomCam from MParList
175	// - Initialize the following MHCamera's:
176	// 1) MCalibrationPix::GetMean()
177	// 2) MCalibrationPix::Sigma()
178	// 3) MCalibrationChargePix::GetRSigma()
179	// 4) MCalibrationChargePix::GetRSigmaPerCharge()
180	// 5) MCalibrationChargePix::GetPheFFactorMethod()
181	// 6) MCalibrationChargePix::GetMeanConvFADC2Phe()
182	// 7) MCalibrationChargePix::GetMeanFFactorFADC2Phot()
183	// 8) MCalibrationQEPix::GetQECascadesFFactor()
184	// 9) MCalibrationQEPix::GetQECascadesBlindPixel()
185	// 10) MCalibrationQEPix::GetQECascadesPINDiode()
186	// 11) MCalibrationQEPix::GetQECascadesCombined()
187	// 12) MCalibrationQEPix::IsAverageQEFFactorAvailable()
188	// 13) MCalibrationQEPix::IsAverageQEBlindPixelAvailable()
189	// 14) MCalibrationQEPix::IsAverageQEPINDiodeAvailable()
190	// 15) MCalibrationQEPix::IsAverageQECombinedAvailable()
191	// 16) MCalibrationChargePix::IsHiGainSaturation()
192	// 17) MCalibrationPix::GetHiLoMeansDivided()
193	// 18) MCalibrationPix::GetHiLoSigmasDivided()
194	// 19) MCalibrationChargePix::GetHiGainPickup()
195	// 20) MCalibrationChargePix::GetLoGainPickup()
196	// 21) MCalibrationChargePix::GetHiGainBlackout()
197	// 22) MCalibrationChargePix::GetLoGainBlackout()
198	// 23) MCalibrationPix::IsExcluded()
199	// 24) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnsuitableRun)
200	// 25) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnreliableRun)
201	// 26) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kHiGainOscillating)
202	// 27) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kLoGainOscillating)
203	// 28) MCalibrationChargePix::GetAbsTimeMean()
204	// 29) MCalibrationChargePix::GetAbsTimeRms()
205	//
206	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
207	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
208	// and otherwise, (default: SetNormalDisplay()), a good selection of plots is given
209	//
210	void MJCalibration::DisplayResult(MParList &plist)
211	{
212	if (!fDisplay)
213	return;
214
215	//
216	// Update display
217	//
218	TString title = fDisplay->GetTitle();
219	title += "-- Calibration ";
220	title += fRuns->GetRunsAsString();
221	title += " --";
222	fDisplay->SetTitle(title);
223
224	//
225	// Get container from list
226	//
227	MGeomCam &geomcam = (MGeomCam)plist.FindObject("MGeomCam");
228
229	// Create histograms to display
230	MHCamera disp1 (geomcam, Form("%s%s","Charge",(fRuns->GetRunsAsFileName()).Data()),
231	"Fitted Mean Charges");
232	MHCamera disp2 (geomcam, Form("%s%s","SigmaCharge",(fRuns->GetRunsAsFileName()).Data()),
233	"Sigma of Fitted Charges");
234	MHCamera disp3 (geomcam, Form("%s%s","RSigma",(fRuns->GetRunsAsFileName()).Data()),
235	"Reduced Sigmas");
236	MHCamera disp4 (geomcam, Form("%s%s","RSigmaPerCharge",(fRuns->GetRunsAsFileName()).Data()),
237	"Reduced Sigma per Charge");
238	MHCamera disp5 (geomcam, Form("%s%s","NumPhes",(fRuns->GetRunsAsFileName()).Data()),
239	"Nr. of Phe's (F-Factor Method)");
240	MHCamera disp6 (geomcam, Form("%s%s","ConvFADC2Phes",(fRuns->GetRunsAsFileName()).Data()),
241	"Conversion Factor (F-Factor Method)");
242	MHCamera disp7 (geomcam, Form("%s%s","TotalFFactor",(fRuns->GetRunsAsFileName()).Data()),
243	"Total F-Factor (F-Factor Method)");
244	MHCamera disp8 (geomcam, Form("%s%s","CascadesQEFFactor",(fRuns->GetRunsAsFileName()).Data()),
245	"Cascades QE (F-Factor Method)");
246	MHCamera disp9 (geomcam, Form("%s%s","CascadesQEBlindPix",(fRuns->GetRunsAsFileName()).Data()),
247	"Cascades QE (Blind Pixel Method)");
248	MHCamera disp10(geomcam, Form("%s%s","CascadesQEPINDiode",(fRuns->GetRunsAsFileName()).Data()),
249	"Cascades QE (PIN Diode Method)");
250	MHCamera disp11(geomcam, Form("%s%s","CascadesQECombined",(fRuns->GetRunsAsFileName()).Data()),
251	"Cascades QE (Combined Method)");
252	MHCamera disp12(geomcam, Form("%s%s","FFactorValid",(fRuns->GetRunsAsFileName()).Data()),
253	"Pixels with valid F-Factor calibration");
254	MHCamera disp13(geomcam, Form("%s%s","BlindPixelValid",(fRuns->GetRunsAsFileName()).Data()),
255	"Pixels with valid BlindPixel calibration");
256	MHCamera disp14(geomcam, Form("%s%s","PINdiodeValid",(fRuns->GetRunsAsFileName()).Data()),
257	"Pixels with valid PINDiode calibration");
258	MHCamera disp15(geomcam, Form("%s%s","CombinedValid",(fRuns->GetRunsAsFileName()).Data()),
259	"Pixels with valid Combined calibration");
260	MHCamera disp16(geomcam, Form("%s%s","Saturation",(fRuns->GetRunsAsFileName()).Data()),
261	"Pixels with saturated Hi Gain");
262	MHCamera disp17(geomcam, Form("%s%s","ConversionMeans",(fRuns->GetRunsAsFileName()).Data()),
263	"Conversion HiGain.vs.LoGain Means");
264	MHCamera disp18(geomcam, Form("%s%s","ConversionSigmas",(fRuns->GetRunsAsFileName()).Data()),
265	"Conversion HiGain.vs.LoGain Sigmas");
266	MHCamera disp19(geomcam, Form("%s%s","HiGainPickup",(fRuns->GetRunsAsFileName()).Data()),
267	"Number Pickup events Hi Gain");
268	MHCamera disp20(geomcam, Form("%s%s","LoGainPickup",(fRuns->GetRunsAsFileName()).Data()),
269	"Number Pickup events Lo Gain");
270	MHCamera disp21(geomcam, Form("%s%s","HiGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
271	"Number Blackout events Hi Gain");
272	MHCamera disp22(geomcam, Form("%s%s","LoGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
273	"Number Blackout events Lo Gain");
274	MHCamera disp23(geomcam, Form("%s%s","Excluded",(fRuns->GetRunsAsFileName()).Data()),
275	"Pixels previously excluded");
276	MHCamera disp24(geomcam, Form("%s%s","UnSuitable",(fRuns->GetRunsAsFileName()).Data()),
277	"Pixels not suited for further analysis");
278	MHCamera disp25(geomcam, Form("%s%s","UnReliable",(fRuns->GetRunsAsFileName()).Data()),
279	"Pixels not reliable for further analysis");
280	MHCamera disp26(geomcam, Form("%s%s","HiGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
281	"Oscillating Pixels High Gain");
282	MHCamera disp27(geomcam, Form("%s%s","LoGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
283	"Oscillating Pixels Low Gain");
284	MHCamera disp28(geomcam, Form("%s%s","AbsTimeMean",(fRuns->GetRunsAsFileName()).Data()),
285	"Abs. Arrival Times");
286	MHCamera disp29(geomcam, Form("%s%s","AbsTimeRms",(fRuns->GetRunsAsFileName()).Data()),
287	"RMS of Arrival Times");
288	MHCamera disp30(geomcam, Form("%s%s","MeanTime",(fRuns->GetRunsAsFileName()).Data()),
289	"Mean Rel. Arrival Times");
290	MHCamera disp31(geomcam, Form("%s%s","SigmaTime",(fRuns->GetRunsAsFileName()).Data()),
291	"Sigma Rel. Arrival Times");
292	MHCamera disp32(geomcam, Form("%s%s","TimeProb",(fRuns->GetRunsAsFileName()).Data()),
293	"Probability of Time Fit");
294	MHCamera disp33(geomcam, Form("%s%s","TimeNotFitValid",(fRuns->GetRunsAsFileName()).Data()),
295	"Pixels with not valid fit results");
296	MHCamera disp34(geomcam, Form("%s%s","TimeOscillating",(fRuns->GetRunsAsFileName()).Data()),
297	"Oscillating Pixels");
298
299	// Fitted charge means and sigmas
300	disp1.SetCamContent(fCalibrationCam, 0);
301	disp1.SetCamError( fCalibrationCam, 1);
302	disp2.SetCamContent(fCalibrationCam, 2);
303	disp2.SetCamError( fCalibrationCam, 3);
304
305	// Reduced Sigmas and reduced sigmas per charge
306	disp3.SetCamContent(fCalibrationCam, 5);
307	disp3.SetCamError( fCalibrationCam, 6);
308	disp4.SetCamContent(fCalibrationCam, 7);
309	disp4.SetCamError( fCalibrationCam, 8);
310
311	// F-Factor Method
312	disp5.SetCamContent(fCalibrationCam, 9);
313	disp5.SetCamError( fCalibrationCam, 10);
314	disp6.SetCamContent(fCalibrationCam, 11);
315	disp6.SetCamError( fCalibrationCam, 12);
316	disp7.SetCamContent(fCalibrationCam, 13);
317	disp7.SetCamError( fCalibrationCam, 14);
318
319	// Quantum Efficiencies
320	disp8.SetCamContent (fQECam, 0 );
321	disp8.SetCamError (fQECam, 1 );
322	disp9.SetCamContent (fQECam, 2 );
323	disp9.SetCamError (fQECam, 3 );
324	disp10.SetCamContent(fQECam, 4 );
325	disp10.SetCamError (fQECam, 5 );
326	disp11.SetCamContent(fQECam, 6 );
327	disp11.SetCamError (fQECam, 7 );
328
329	// Valid flags
330	disp12.SetCamContent(fQECam, 8 );
331	disp13.SetCamContent(fQECam, 9 );
332	disp14.SetCamContent(fQECam, 10);
333	disp15.SetCamContent(fQECam, 11);
334
335	// Conversion Hi-Lo
336	disp16.SetCamContent(fCalibrationCam, 25);
337	disp17.SetCamContent(fCalibrationCam, 16);
338	disp17.SetCamError (fCalibrationCam, 17);
339	disp18.SetCamContent(fCalibrationCam, 18);
340	disp18.SetCamError (fCalibrationCam, 19);
341
342	// Pickup and Blackout
343	disp19.SetCamContent(fCalibrationCam, 21);
344	disp20.SetCamContent(fCalibrationCam, 22);
345	disp21.SetCamContent(fCalibrationCam, 23);
346	disp22.SetCamContent(fCalibrationCam, 24);
347
348	// Pixels with defects
349	disp23.SetCamContent(fCalibrationCam, 20);
350	disp24.SetCamContent(fBadPixels, 1);
351	disp25.SetCamContent(fBadPixels, 3);
352
353	// Oscillations
354	disp26.SetCamContent(fBadPixels, 10);
355	disp27.SetCamContent(fBadPixels, 11);
356
357	// Arrival Times
358	disp28.SetCamContent(fCalibrationCam, 26);
359	disp28.SetCamError( fCalibrationCam, 27);
360	disp29.SetCamContent(fCalibrationCam, 27);
361
362	disp1.SetYTitle("Q [FADC counts]");
363	disp2.SetYTitle("\\sigma_{Q} [FADC counts]");
364
365	disp3.SetYTitle("\\sqrt{\\sigma^{2}_{Q} - RMS^{2}_{Ped}} [FADC Counts]");
366	disp4.SetYTitle("Red.Sigma/<Q> [1]");
367
368	disp5.SetYTitle("Nr. Phe's [1]");
369	disp6.SetYTitle("Conv.Factor [PhE/FADC counts]");
370	disp7.SetYTitle("Total F-Factor [1]");
371
372	disp8.SetYTitle("QE [1]");
373	disp9.SetYTitle("QE [1]");
374	disp10.SetYTitle("QE [1]");
375	disp11.SetYTitle("QE [1]");
376
377	disp12.SetYTitle("[1]");
378	disp13.SetYTitle("[1]");
379	disp14.SetYTitle("[1]");
380	disp15.SetYTitle("[1]");
381	disp16.SetYTitle("[1]");
382
383	disp17.SetYTitle("<Q>(High)/<Q>(Low) [1]");
384	disp18.SetYTitle("\\sigma_{Q}(High)/\\sigma_{Q}(Low) [1]");
385
386	disp19.SetYTitle("[1]");
387	disp20.SetYTitle("[1]");
388	disp21.SetYTitle("[1]");
389	disp22.SetYTitle("[1]");
390	disp23.SetYTitle("[1]");
391	disp24.SetYTitle("[1]");
392	disp25.SetYTitle("[1]");
393	disp26.SetYTitle("[1]");
394	disp27.SetYTitle("[1]");
395
396	disp28.SetYTitle("Mean Abs. Time [FADC slice]");
397	disp29.SetYTitle("RMS Abs. Time [FADC slices]");
398
399	if (fRelTimes)
400	{
401
402	disp30.SetCamContent(fRelTimeCam,0);
403	disp30.SetCamError( fRelTimeCam,1);
404	disp31.SetCamContent(fRelTimeCam,2);
405	disp31.SetCamError( fRelTimeCam,3);
406	disp32.SetCamContent(fRelTimeCam,4);
407	disp33.SetCamContent(fBadPixels,20);
408	disp34.SetCamContent(fBadPixels,21);
409
410	disp30.SetYTitle("Time Offset [FADC units]");
411	disp31.SetYTitle("Timing resolution [FADC units]");
412	disp32.SetYTitle("P_{Time} [1]");
413	disp33.SetYTitle("[1]");
414	disp34.SetYTitle("[1]");
415	}
416
417	if (fDisplayType == kDataCheckDisplay)
418	{
419	TCanvas &c1 = fDisplay->AddTab("Fit.Charge");
420	c1.Divide(3, 3);
421
422	disp1.CamDraw(c1, 1, 3, 2);
423	disp4.CamDraw(c1, 2, 3, 2);
424	disp28.CamDraw(c1, 3, 3, 2);
425
426	// F-Factor
427	TCanvas &c2 = fDisplay->AddTab("Phe's");
428	c2.Divide(3,4);
429
430	disp6.CamDraw(c2, 1, 3, 2, 1);
431	disp7.CamDraw(c2, 2, 3, 2, 1);
432	disp8.CamDraw(c2, 3, 3, 2, 1);
433
434	// QE's
435	TCanvas &c3 = fDisplay->AddTab("QE's");
436	c3.Divide(3,4);
437
438	disp8.CamDraw(c3, 1, 3, 2, 1);
439	disp9.CamDraw(c3, 2, 3, 2, 1);
440	disp10.CamDraw(c3, 3, 3, 2, 1);
441
442	// Defects
443	TCanvas &c4 = fDisplay->AddTab("Defect");
444	// c4.Divide(3,2);
445	c4.Divide(2,2);
446
447	// CamDraw(c4, 1, 3, disp23, 0);
448	// CamDraw(c4, 2, 3, disp24, 0);
449	// CamDraw(c4, 3, 3, disp25, 0);
450	disp24.CamDraw(c4, 1, 2, 0);
451	disp25.CamDraw(c4, 2, 2, 0);
452
453	if (fRelTimes)
454	{
455	// Rel. Times
456	TCanvas &c5 = fDisplay->AddTab("Rel. Times");
457	c5.Divide(2,4);
458
459	disp30.CamDraw(c5, 1, 2, 2);
460	disp31.CamDraw(c5, 2, 2, 2);
461	}
462
463
464	return;
465	}
466
467	if (fDisplayType == kNormalDisplay)
468	{
469
470	// Charges
471	TCanvas &c11 = fDisplay->AddTab("Fit.Charge");
472	c11.Divide(2, 4);
473
474	disp1.CamDraw(c11, 1, 2, 5, 1);
475	disp2.CamDraw(c11, 2, 2, 5, 1);
476
477	// Reduced Sigmas
478	TCanvas &c12 = fDisplay->AddTab("Red.Sigma");
479	c12.Divide(2,4);
480
481	disp3.CamDraw(c12, 1, 2, 5, 1);
482	disp4.CamDraw(c12, 2, 2, 5, 1);
483
484	// F-Factor
485	TCanvas &c13 = fDisplay->AddTab("Phe's");
486	c13.Divide(3,4);
487
488	disp5.CamDraw(c13, 1, 3, 5, 1);
489	disp6.CamDraw(c13, 2, 3, 5, 1);
490	disp7.CamDraw(c13, 3, 3, 5, 1);
491
492	// QE's
493	TCanvas &c14 = fDisplay->AddTab("QE's");
494	c14.Divide(4,4);
495
496	disp8.CamDraw(c14, 1, 4, 5, 1);
497	disp9.CamDraw(c14, 2, 4, 5, 1);
498	disp10.CamDraw(c14, 3, 4, 5, 1);
499	disp11.CamDraw(c14, 4, 4, 5, 1);
500
501	// Defects
502	TCanvas &c15 = fDisplay->AddTab("Defect");
503	// c15.Divide(5,2);
504	c15.Divide(4,2);
505
506	/*
507	disp23.CamDraw(c15, 1, 5, 0);
508	disp24.CamDraw(c15, 2, 5, 0);
509	disp25.CamDraw(c15, 3, 5, 0);
510	disp26.CamDraw(c15, 4, 5, 0);
511	disp27.CamDraw(c15, 5, 5, 0);
512	*/
513	disp24.CamDraw(c15, 1, 4, 0);
514	disp25.CamDraw(c15, 2, 4, 0);
515	disp26.CamDraw(c15, 3, 4, 0);
516	disp27.CamDraw(c15, 4, 4, 0);
517
518	// Abs. Times
519	TCanvas &c16 = fDisplay->AddTab("Abs. Times");
520	c16.Divide(2,3);
521
522	disp28.CamDraw(c16, 1, 2, 5);
523	disp29.CamDraw(c16, 2, 2, 5);
524
525	if (fRelTimes)
526	{
527	// Rel. Times
528	TCanvas &c17 = fDisplay->AddTab("Rel. Times");
529	c17.Divide(2,4);
530
531	disp30.CamDraw(c17, 1, 2, 5, 1);
532	disp31.CamDraw(c17, 2, 2, 5, 1);
533	}
534
535	return;
536	}
537
538	if (fDisplayType == kFullDisplay)
539	{
540
541	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationChargeCam");
542
543	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
544	{
545	cam->GetAverageHiGainSector(sector).DrawClone("all");
546	cam->GetAverageLoGainSector(sector).DrawClone("all");
547	}
548
549	// Charges
550	TCanvas &c21 = fDisplay->AddTab("Fit.Charge");
551	c21.Divide(2, 4);
552
553	disp1.CamDraw(c21, 1, 2, 2, 1);
554	disp2.CamDraw(c21, 2, 2, 2, 1);
555
556	// Reduced Sigmas
557	TCanvas &c23 = fDisplay->AddTab("Red.Sigma");
558	c23.Divide(2,4);
559
560	disp3.CamDraw(c23, 1, 2, 2, 1);
561	disp4.CamDraw(c23, 2, 2, 2, 1);
562
563	// F-Factor
564	TCanvas &c24 = fDisplay->AddTab("Phe's");
565	c24.Divide(3,5);
566
567	disp5.CamDraw(c24, 1, 3, 2, 1, 1);
568	disp6.CamDraw(c24, 2, 3, 2, 1, 1);
569	disp7.CamDraw(c24, 3, 3, 2, 1, 1);
570
571	// QE's
572	TCanvas &c25 = fDisplay->AddTab("QE's");
573	c25.Divide(4,5);
574
575	disp8.CamDraw(c25, 1, 4, 2, 1, 1);
576	disp9.CamDraw(c25, 2, 4, 2, 1, 1);
577	disp10.CamDraw(c25, 3, 4, 2, 1, 1);
578	disp11.CamDraw(c25, 4, 4, 2, 1, 1);
579
580	// Validity
581	TCanvas &c26 = fDisplay->AddTab("Valid");
582	c26.Divide(4,2);
583
584	disp12.CamDraw(c26, 1, 4, 0);
585	disp13.CamDraw(c26, 2, 4, 0);
586	disp14.CamDraw(c26, 3, 4, 0);
587	disp15.CamDraw(c26, 4, 4, 0);
588
589	// Other info
590	TCanvas &c27 = fDisplay->AddTab("HiLoGain");
591	c27.Divide(3,3);
592
593	disp16.CamDraw(c27, 1, 3, 0);
594	disp17.CamDraw(c27, 2, 3, 1);
595	disp18.CamDraw(c27, 3, 3, 1);
596
597	// Pickup
598	TCanvas &c28 = fDisplay->AddTab("Pickup");
599	c28.Divide(4,2);
600
601	disp19.CamDraw(c28, 1, 4, 0);
602	disp20.CamDraw(c28, 2, 4, 0);
603	disp21.CamDraw(c28, 3, 4, 0);
604	disp22.CamDraw(c28, 4, 4, 0);
605
606	// Defects
607	TCanvas &c29 = fDisplay->AddTab("Defect");
608	// c29.Divide(5,2);
609	c29.Divide(4,2);
610
611	disp24.CamDraw(c29, 1, 4, 0);
612	disp25.CamDraw(c29, 2, 4, 0);
613	disp26.CamDraw(c29, 3, 4, 0);
614	disp27.CamDraw(c29, 4, 4, 0);
615
616	// Abs. Times
617	TCanvas &c30 = fDisplay->AddTab("Abs. Times");
618	c30.Divide(2,3);
619
620	disp28.CamDraw(c30, 1, 2, 2);
621	disp29.CamDraw(c30, 2, 2, 1);
622
623	if (fRelTimes)
624	{
625	// Rel. Times
626	TCanvas &c31 = fDisplay->AddTab("Rel. Times");
627	c31.Divide(3,5);
628
629	disp30.CamDraw(c31, 1, 3, 2, 1, 1);
630	disp31.CamDraw(c31, 2, 3, 2, 1, 1);
631	disp32.CamDraw(c31, 3, 3, 4, 1, 1);
632
633	// Time Defects
634	TCanvas &c32 = fDisplay->AddTab("Time Def.");
635	c32.Divide(2,2);
636
637	disp33.CamDraw(c32, 1, 2, 0);
638	disp34.CamDraw(c32, 2, 2, 0);
639
640	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationRelTimeCam");
641
642	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
643	{
644	cam->GetAverageHiGainSector(sector).DrawClone("fourierevents");
645	cam->GetAverageLoGainSector(sector).DrawClone("fourierevents");
646	}
647
648	}
649
650	return;
651	}
652	}
653
654
655
656	// --------------------------------------------------------------------------
657	//
658	// Find the colour of the pulsing LED:
659	// - If the run number is smaller than gkIFAEBoxInaugurationRun, take MCalibrationCam::kCT1
660	// - Otherwise find the colour out of the run name
661	// - If no colour is found, return kFALSE
662	//
663	Bool_t MJCalibration::FindColor()
664	{
665
666	const UInt_t nruns = fRuns->GetNumRuns();
667
668	if (nruns == 0)
669	return kFALSE;
670
671	TArrayI arr = fRuns->GetRuns();
672
673	if (arr[nruns-1] < gkIFAEBoxInaugurationRun)
674	{
675	*fLog << "Found colour kCT1 in runs: " << fRuns->GetRunsAsString() << endl;
676	fColor = MCalibrationCam::kCT1;
677	return kTRUE;
678	}
679
680	TString filenames;
681	((MDirIter*)fRuns)->Reset();
682
683	while (!(filenames=((MDirIter*)fRuns)->Next()).IsNull())
684	{
685
686	filenames.ToLower();
687
688	//
689	// Here starts the list of runs where the shifters did not put
690	// a colour, but which have been found out by other means
691	//
692	if (filenames.Contains("_27474_"))
693	if (fColor == MCalibrationCam::kNONE)
694	{
695	*fLog << "Sorry, run 27474 was taken with CLOSED LIDS. It should not be used! "
696	<< "Selected runs were: " << filenames << endl;
697	fColor = MCalibrationCam::kNONE;
698	return kFALSE;
699	}
700	else if (fColor != MCalibrationCam::kNONE)
701	{
702	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
703	return kFALSE;
704	}
705
706	if (filenames.Contains("_26924_"))
707	if (fColor == MCalibrationCam::kNONE)
708	{
709	*fLog << "Found colour: kGREEN in " << filenames << endl;
710	fColor = MCalibrationCam::kGREEN;
711	}
712	else if (fColor != MCalibrationCam::kGREEN)
713	{
714	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
715	return kFALSE;
716	}
717
718
719	if (filenames.Contains("_26568_"))
720	if (fColor == MCalibrationCam::kNONE)
721	{
722	*fLog << "Found colour: kGREEN in " << filenames << endl;
723	fColor = MCalibrationCam::kGREEN;
724	}
725	else if (fColor != MCalibrationCam::kGREEN)
726	{
727	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
728	return kFALSE;
729	}
730
731	if (filenames.Contains("_26412_"))
732	if (fColor == MCalibrationCam::kNONE)
733	{
734	*fLog << "Found colour: kGREEN in " << filenames << endl;
735	fColor = MCalibrationCam::kGREEN;
736	}
737	else if (fColor != MCalibrationCam::kGREEN)
738	{
739	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
740	return kFALSE;
741	}
742
743
744	if (filenames.Contains("_26409_"))
745	if (fColor == MCalibrationCam::kNONE)
746	{
747	*fLog << "Found colour: kGREEN in " << filenames << endl;
748	fColor = MCalibrationCam::kGREEN;
749	}
750	else if (fColor != MCalibrationCam::kGREEN)
751	{
752	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
753	return kFALSE;
754	}
755
756	if (filenames.Contains("_26408_"))
757	if (fColor == MCalibrationCam::kNONE)
758	{
759	*fLog << "Found colour: kGREEN in " << filenames << endl;
760	fColor = MCalibrationCam::kGREEN;
761	}
762	else if (fColor != MCalibrationCam::kGREEN)
763	{
764	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
765	return kFALSE;
766	}
767
768
769	if (filenames.Contains("_26402_"))
770	if (fColor == MCalibrationCam::kNONE)
771	{
772	*fLog << "Found colour: kBLUE in " << filenames << endl;
773	fColor = MCalibrationCam::kBLUE;
774	}
775	else if (fColor != MCalibrationCam::kBLUE)
776	{
777	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
778	return kFALSE;
779	}
780
781	if (filenames.Contains("_20661_"))
782	if (fColor == MCalibrationCam::kNONE)
783	{
784	*fLog << "Found colour: kGREEN in " << filenames << endl;
785	fColor = MCalibrationCam::kGREEN;
786	}
787	else if (fColor != MCalibrationCam::kGREEN)
788	{
789	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
790	return kFALSE;
791	}
792
793	if (filenames.Contains("_20660_"))
794	if (fColor == MCalibrationCam::kNONE)
795	{
796	*fLog << "Found colour: kGREEN in " << filenames << endl;
797	fColor = MCalibrationCam::kGREEN;
798	}
799	else if (fColor != MCalibrationCam::kGREEN)
800	{
801	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
802	return kFALSE;
803	}
804
805	//
806	// Here start the runs where the shifter put
807	// the colour
808	//
809	if (filenames.Contains("green"))
810	if (fColor == MCalibrationCam::kNONE)
811	{
812	*fLog << "Found colour: kGREEN in " << filenames << endl;
813	fColor = MCalibrationCam::kGREEN;
814	}
815	else if (fColor != MCalibrationCam::kGREEN)
816	{
817	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
818	return kFALSE;
819	}
820
821	if (filenames.Contains("blue"))
822	if (fColor == MCalibrationCam::kNONE)
823	{
824	*fLog << "Found colour: kBLUE in " << filenames << endl;
825	fColor = MCalibrationCam::kBLUE;
826	}
827	else if (fColor != MCalibrationCam::kBLUE)
828	{
829	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
830	return kFALSE;
831	}
832
833	if (filenames.Contains("uv"))
834	if (fColor == MCalibrationCam::kNONE)
835	{
836	*fLog << "Found colour: kUV in " << filenames << endl;
837	fColor = MCalibrationCam::kUV;
838	}
839	else if (fColor != MCalibrationCam::kUV)
840	{
841	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
842	return kFALSE;
843	}
844
845	if (filenames.Contains("ct1"))
846	if (fColor == MCalibrationCam::kNONE)
847	{
848	*fLog << "Found colour: kCT1 in " << filenames << endl;
849	fColor = MCalibrationCam::kCT1;
850	}
851	else if (fColor != MCalibrationCam::kCT1)
852	{
853	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
854	return kFALSE;
855	}
856
857	}
858
859	if (fColor == MCalibrationCam::kNONE)
860	{
861	*fLog << "No colour found in filenames of runs: " << fRuns->GetRunsAsString()
862	<< "... abort" << endl;
863	return kFALSE;
864	}
865
866	return kTRUE;
867	}
868
869
870
871
872	// --------------------------------------------------------------------------
873	//
874	// Retrieve the output file written by WriteResult()
875	//
876	const char* MJCalibration::GetOutputFile() const
877	{
878
879	if (!fRuns)
880	return "";
881
882	return Form("%s/%s-F1.root", (const char)fOutputPath, (const char)fRuns->GetRunsAsFileName());
883	}
884
885
886	Bool_t MJCalibration::IsUseBlindPixel() const
887	{
888	return TESTBIT(fDevices,kUseBlindPixel);
889	}
890
891
892	Bool_t MJCalibration::IsUsePINDiode() const
893	{
894	return TESTBIT(fDevices,kUsePINDiode);
895	}
896
897
898
899
900
901	// --------------------------------------------------------------------------
902	//
903	// Call the ProcessFile(MPedestalCam)
904	//
905	Bool_t MJCalibration::Process(MPedestalCam &pedcam)
906	{
907	if (!ReadCalibrationCam())
908	return ProcessFile(pedcam);
909
910	return kTRUE;
911	}
912
913	// --------------------------------------------------------------------------
914	//
915	// Execute the task list and the eventloop:
916	//
917	// - Check if there are fRuns, otherwise return
918	// - Check the colour of the files in fRuns (FindColor()), otherwise return
919	// - Check for consistency between run numbers and number of files
920	// - Add fRuns to MReadMarsFile
921	// - Put into MParList:
922	// 1) MPedestalCam (pedcam)
923	// 2) MCalibrationQECam (fQECam)
924	// 3) MCalibrationChargeCam (fCalibrationCam)
925	// 4) MCalibrationRelTimeCam (fRelTimeCam) (only if flag fRelTimes is chosen)
926	// 5) MBadPixelsCam (fBadPixels)
927	// 6) MCalibrationChargePINDiode
928	// 7) MCalibrationChargeBlindPix
929	// - Put into the MTaskList:
930	// 1) MReadMarsFile
931	// 2) MBadPixelsMerge
932	// 3) MGeomApply
933	// 4) MExtractor
934	// 5) MExtractPINDiode
935	// 6) MExtractBlindPixel
936	// 7) MExtractTime (only if flag fRelTimes is chosen)
937	// 8) MContinue(MFCosmics)
938	// 9) MFillH("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode")
939	// 10) MFillH("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel")
940	// 11) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
941	// 12) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
942	// 13) MCalibrationChargeCalc
943	// 14) MFillH("MHCalibrationRelTimeCam", "MArrivalTimeCam") (only if flag fRelTimes is chosen)
944	// 15) MCalibrationRelTimeCalc
945	// - Execute MEvtLoop
946	// - DisplayResult()
947	// - WriteResult()
948	//
949	Bool_t MJCalibration::ProcessFile(MPedestalCam &pedcam)
950	{
951	if (!fRuns)
952	{
953	*fLog << err << "No Runs choosen... abort." << endl;
954	return kFALSE;
955	}
956
957	if (fRuns->GetNumRuns() != fRuns->GetNumEntries())
958	{
959	*fLog << err << "Number of files found doesn't match number of runs... abort."
960	<< fRuns->GetNumRuns() << " vs. " << fRuns->GetNumEntries() << endl;
961	return kFALSE;
962	}
963
964	*fLog << inf;
965	fLog->Separator(GetDescriptor());
966
967	if (!FindColor())
968	return kFALSE;
969
970	*fLog << "Calculate MCalibrationCam from Runs " << fRuns->GetRunsAsString() << endl;
971	*fLog << endl;
972
973	// Setup Tasklist
974	MParList plist;
975	MTaskList tlist;
976	plist.AddToList(&tlist);
977
978	MReadMarsFile read("Events");
979	MRawFileRead rawread(NULL);
980
981	if (fDataCheck)
982	{
983	rawread.AddFiles(*fRuns);
984	tlist.AddToList(&rawread);
985	}
986	else
987	{
988	read.DisableAutoScheme();
989	static_cast<MRead&>(read).AddFiles(*fRuns);
990	tlist.AddToList(&read);
991	}
992
993	plist.AddToList(&pedcam);
994	plist.AddToList(&fBadPixels);
995	plist.AddToList(&fQECam);
996	plist.AddToList(&fCalibrationCam);
997	plist.AddToList(&fCalibrationBlindPix);
998	plist.AddToList(&fCalibrationPINDiode);
999	plist.AddToList(&fRelTimeCam);
1000
1001	MGeomApply apply;
1002	// MBadPixelsMerge merge(&fBadPixels);
1003	MExtractPINDiode pinext;
1004	MExtractBlindPixel blindext;
1005	MExtractSlidingWindow extract2;
1006	MExtractTimeSpline timespline;
1007	MCalibrationChargeCalc calcalc;
1008	calcalc.SetOutputPath(fOutputPath);
1009	calcalc.SetOutputFile(Form("%s-ChargeCalibStat.txt",(const char*)fRuns->GetRunsAsFileName()));
1010
1011	MCalibrationRelTimeCalc timecalc;
1012	timecalc.SetOutputPath(fOutputPath);
1013	timecalc.SetOutputFile(Form("%s-TimeCalibStat.txt",(const char*)fRuns->GetRunsAsFileName()));
1014
1015	//
1016	// As long as there are no DM's, have to colour by hand
1017	//
1018	calcalc.SetPulserColor(fColor);
1019
1020	MFillH fillpin("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode");
1021	MFillH fillbnd("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel");
1022	MFillH fillcam("MHCalibrationChargeCam", "MExtractedSignalCam");
1023	MFillH filltme("MHCalibrationRelTimeCam", "MArrivalTimeCam");
1024	fillpin.SetNameTab("PINDiode");
1025	fillbnd.SetNameTab("BlindPix");
1026	fillcam.SetNameTab("Charge");
1027	filltme.SetNameTab("RelTimes");
1028
1029	if (fDisplayType == kFullDisplay)
1030	{
1031	fillcam.SetDrawOption("all");
1032	filltme.SetDrawOption("all");
1033	}
1034
1035
1036	//
1037	// Apply a filter against cosmics
1038	// (will have to be needed in the future
1039	// when the calibration hardware-trigger is working)
1040	//
1041	MFCosmics cosmics;
1042	MContinue cont(&cosmics);
1043
1044	// tlist.AddToList(&merge);
1045	tlist.AddToList(&apply);
1046
1047	if (fExtractor)
1048	tlist.AddToList(fExtractor);
1049	else
1050	{
1051	*fLog << warn << GetDescriptor()
1052	<< ": No extractor has been chosen, take default MExtractSlidingWindow " << endl;
1053	tlist.AddToList(&extract2);
1054	}
1055
1056
1057	tlist.AddToList(&pinext);
1058	tlist.AddToList(&blindext);
1059
1060	if (fRelTimes)
1061	{
1062	if (fTimeExtractor)
1063	tlist.AddToList(fTimeExtractor);
1064	else
1065	{
1066	*fLog << warn << GetDescriptor()
1067	<< ": No extractor has been chosen, take default MTimeExtractSpline " << endl;
1068	tlist.AddToList(&timespline);
1069	}
1070	}
1071
1072	if (fColor == MCalibrationCam::kCT1)
1073	tlist.AddToList(&cont);
1074
1075	tlist.AddToList(&fillcam);
1076
1077	if (IsUsePINDiode())
1078	tlist.AddToList(&fillpin);
1079	if (IsUseBlindPixel())
1080	tlist.AddToList(&fillbnd);
1081
1082	tlist.AddToList(&calcalc);
1083
1084	if (fRelTimes)
1085	{
1086	tlist.AddToList(&filltme);
1087	tlist.AddToList(&timecalc);
1088	}
1089
1090
1091	// Create and setup the eventloop
1092	MEvtLoop evtloop(fName);
1093	evtloop.SetParList(&plist);
1094	evtloop.SetDisplay(fDisplay);
1095	evtloop.SetLogStream(fLog);
1096
1097	// Execute first analysis
1098	if (!evtloop.Eventloop())
1099	{
1100	*fLog << err << GetDescriptor() << ": Failed." << endl;
1101	return kFALSE;
1102	}
1103
1104	tlist.PrintStatistics();
1105
1106	DisplayResult(plist);
1107
1108	if (!WriteResult())
1109	return kFALSE;
1110
1111	*fLog << inf << GetDescriptor() << ": Done." << endl;
1112
1113	return kTRUE;
1114	}
1115
1116	// --------------------------------------------------------------------------
1117	//
1118	// Read the following containers from GetOutputFile()
1119	// - MCalibrationChargeCam
1120	// - MCalibrationQECam
1121	// - MBadPixelsCam
1122	//
1123	Bool_t MJCalibration::ReadCalibrationCam()
1124	{
1125
1126	const TString fname = GetOutputFile();
1127
1128	if (gSystem->AccessPathName(fname, kFileExists))
1129	{
1130	*fLog << err << "Input file " << fname << " doesn't exist." << endl;
1131	return kFALSE;
1132	}
1133
1134	*fLog << inf << "Reading from file: " << fname << endl;
1135
1136	TFile file(fname, "READ");
1137	if (fCalibrationCam.Read()<=0)
1138	{
1139	*fLog << err << "Unable to read MCalibrationChargeCam from " << fname << endl;
1140	return kFALSE;
1141	}
1142
1143	if (fQECam.Read()<=0)
1144	{
1145	*fLog << err << "Unable to read MCalibrationQECam from " << fname << endl;
1146	return kFALSE;
1147	}
1148
1149
1150	if (fRelTimes)
1151	if (fRelTimeCam.Read()<=0)
1152	{
1153	*fLog << err << "Unable to read MCalibrationRelTimeCam from " << fname << endl;
1154	return kFALSE;
1155	}
1156
1157	if (file.FindKey("MBadPixelsCam"))
1158	{
1159	MBadPixelsCam bad;
1160	if (bad.Read()<=0)
1161	{
1162	*fLog << err << "Unable to read MBadPixelsCam from " << fname << endl;
1163	return kFALSE;
1164	}
1165	fBadPixels.Merge(bad);
1166	}
1167
1168	if (fDisplay /&& !fDisplay->GetCanvas("Pedestals")/) // FIXME!
1169	fDisplay->Read();
1170
1171	return kTRUE;
1172	}
1173
1174
1175	// --------------------------------------------------------------------------
1176	//
1177	// Set the path for output files, written by WriteResult()
1178	//
1179	void MJCalibration::SetOutputPath(const char *path)
1180	{
1181	fOutputPath = path;
1182	if (fOutputPath.EndsWith("/"))
1183	fOutputPath = fOutputPath(0, fOutputPath.Length()-1);
1184	}
1185
1186	// --------------------------------------------------------------------------
1187	//
1188	// Set the useage of the Blind Pixel device
1189	//
1190	void MJCalibration::SetUseBlindPixel(const Bool_t b)
1191	{
1192	b ? SETBIT(fDevices,kUseBlindPixel) : CLRBIT(fDevices,kUseBlindPixel);
1193	}
1194
1195	// --------------------------------------------------------------------------
1196	//
1197	// Set the useage of the PIN Diode device
1198	//
1199	void MJCalibration::SetUsePINDiode(const Bool_t b)
1200	{
1201	b ? SETBIT(fDevices,kUsePINDiode) : CLRBIT(fDevices,kUsePINDiode);
1202	}
1203
1204	// --------------------------------------------------------------------------
1205	//
1206	// Write the result into the output file GetOutputFile(), if fOutputPath exists.
1207	//
1208	// The following containers are written:
1209	// - MStatusDisplay
1210	// - MCalibrationChargeCam
1211	// - MCalibrationChargeBlindPix
1212	// - MCalibrationQECam
1213	// - MBadPixelsCam
1214	//
1215	Bool_t MJCalibration::WriteResult()
1216	{
1217	if (fOutputPath.IsNull())
1218	return kTRUE;
1219
1220	const TString oname(GetOutputFile());
1221
1222	*fLog << inf << "Writing to file: " << oname << endl;
1223
1224	TFile file(oname, "UPDATE");
1225
1226	if (fDisplay && fDisplay->Write()<=0)
1227	{
1228	*fLog << err << "Unable to write MStatusDisplay to " << oname << endl;
1229	return kFALSE;
1230	}
1231
1232	if (fCalibrationCam.Write()<=0)
1233	{
1234	*fLog << err << "Unable to write MCalibrationChargeCam to " << oname << endl;
1235	return kFALSE;
1236	}
1237
1238	if (fCalibrationBlindPix.Write()<=0)
1239	{
1240	*fLog << err << "Unable to write MCalibrationChargeBlindPix to " << oname << endl;
1241	return kFALSE;
1242	}
1243
1244	if (fCalibrationPINDiode.Write()<=0)
1245	{
1246	*fLog << err << "Unable to write MCalibrationChargePINDiode to " << oname << endl;
1247	return kFALSE;
1248	}
1249
1250	if (fQECam.Write()<=0)
1251	{
1252	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1253	return kFALSE;
1254	}
1255
1256	if (fRelTimes)
1257	if (fRelTimeCam.Write()<=0)
1258	{
1259	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1260	return kFALSE;
1261	}
1262
1263	if (fBadPixels.Write()<=0)
1264	{
1265	*fLog << err << "Unable to write MBadPixelsCam to " << oname << endl;
1266	return kFALSE;
1267	}
1268
1269	return kTRUE;
1270
1271	}
1272

Note: See TracBrowser for help on using the repository browser.

Download in other formats: