Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJCalibration.cc@ 4308

Visit:

Last change on this file since 4308 was 4304, checked in by reyes, 20 years ago
* empty log message *
File size: 40.2 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2004 <mailto:tbretz@astro.uni-wuerzburg.de>
19	! Markus Gaug, 02/2004 <mailto:markus@ifae.es>
20	!
21	! Copyright: MAGIC Software Development, 2000-2004
22	!
23	!
24	\* ======================================================================== */
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJCalibration
28	//
29	// Do one calibration loop over serious of runs with the same pulser
30	// colour and the same intensity. The following containers (rectangular) and
31	// tasks (ellipses) are called to produce an MCalibrationChargeCam and to
32	// update the MCalibrationQECam: (MCalibrate is not called from this class)
33	//
34	//Begin_Html
35	/*
36	<img src="images/CalibClasses.gif">
37	*/
38	//End_Html
39	//
40	// Different signal extractors can be set with the command SetExtractor()
41	// Only extractors deriving from MExtractor can be set, default is MExtractSlidingWindow
42	//
43	// Different arrival time extractors can be set with the command SetTimeExtractor()
44	// Only extractors deriving from MExtractTime can be set, default is MExtractTimeSpline
45	//
46	// At the end of the eventloop, plots and results are displayed, depending on
47	// the flags set (see DisplayResult())
48	//
49	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
50	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
51	// Otherwise, (default: SetNormalDisplay()), a good selection of plots is given
52	//
53	// If the flag SetDataCheck() is set, the calibration is used as in the data check at
54	// La Palma, which mean especially running on raw data files.
55	//
56	// The absolute light calibration devices Blind Pixel and PIN Diode can be switched on
57	// and off with the commands:
58	//
59	// - SetUseBlindPixel(Bool_t )
60	// - SetUsePINDiode(Bool_t )
61	//
62	// See also: MHCalibrationChargePix, MHCalibrationChargeCam, MHGausEvents
63	// MHCalibrationChargeBlindPix, MHCalibrationChargePINDiode
64	// MCalibrationChargePix, MCalibrationChargeCam, MCalibrationChargeCalc
65	// MCalibrationChargeBlindPix, MCalibrationChargePINDiode,
66	// MCalibrationQECam, MBadPixelsPix, MBadPixelsCam
67	//
68	// If the flag RelTimeCalibration() is set, a calibration of the relative arrival
69	// times is also performed. The following containers (rectangular) and
70	// tasks (ellipses) are called to produce an MCalibrationRelTimeCam used by
71	// MCalibrateTime to correct timing offset between pixels: (MCalibrateTime is not
72	// called from this class)
73	//
74	//Begin_Html
75	/*
76	<img src="images/RelTimeClasses.gif">
77	*/
78	//End_Html
79	//
80	// Different arrival time extractors can be set directly with the command SetTimeExtractor(MExtractor *)
81	//
82	// See also: MHCalibrationRelTimePix, MHCalibrationRelTimeCam, MHGausEvents
83	// MCalibrationRelTimePix, MCalibrationRelTimeCam
84	// MBadPixelsPix, MBadPixelsCam
85	//
86	/////////////////////////////////////////////////////////////////////////////
87	#include "MJCalibration.h"
88
89	#include <TFile.h>
90	#include <TStyle.h>
91	#include <TCanvas.h>
92	#include <TSystem.h>
93
94	#include "MLog.h"
95	#include "MLogManip.h"
96
97	#include "MRunIter.h"
98	#include "MParList.h"
99	#include "MTaskList.h"
100	#include "MEvtLoop.h"
101
102	#include "MHCamera.h"
103	#include "MGeomCam.h"
104
105	#include "MPedestalCam.h"
106	#include "MCalibrationCam.h"
107	#include "MCalibrationQECam.h"
108	#include "MCalibrationChargeCam.h"
109	#include "MCalibrationChargePINDiode.h"
110	#include "MCalibrationChargeBlindPix.h"
111	#include "MCalibrationChargeCalc.h"
112
113	#include "MHGausEvents.h"
114	#include "MHCalibrationCam.h"
115	#include "MHCalibrationChargeCam.h"
116	#include "MHCalibrationChargeBlindPix.h"
117	#include "MHCalibrationRelTimeCam.h"
118	#include "MCalibrationRelTimeCam.h"
119	#include "MCalibrationRelTimeCalc.h"
120
121	#include "MReadMarsFile.h"
122	#include "MRawFileRead.h"
123	#include "MGeomApply.h"
124	#include "MBadPixelsMerge.h"
125	#include "MBadPixelsCam.h"
126	#include "MExtractTime.h"
127	#include "MExtractor.h"
128	#include "MExtractPINDiode.h"
129	#include "MExtractBlindPixel.h"
130	#include "MExtractSlidingWindow.h"
131	#include "MExtractTimeSpline.h"
132	#include "MFCosmics.h"
133	#include "MContinue.h"
134	#include "MFillH.h"
135
136	#include "MArrivalTimeCam.h"
137
138	#include "MStatusDisplay.h"
139
140	ClassImp(MJCalibration);
141
142	using namespace std;
143
144	const Int_t MJCalibration::gkIFAEBoxInaugurationRun = 20113;
145	// --------------------------------------------------------------------------
146	//
147	// Default constructor.
148	//
149	// - Sets fRuns to 0, fExtractor to NULL, fTimeExtractor to NULL, fColor to kNONE,
150	// fDisplay to kNormalDisplay, fRelTime to kFALSE, fDataCheck to kFALSE,
151	// - SetUseBlindPixel()
152	// - SetUsePINDiode()
153	//
154	MJCalibration::MJCalibration(const char name, const char title)
155	: fRuns(0), fExtractor(NULL), fTimeExtractor(NULL),
156	fColor(MCalibrationCam::kNONE), fDisplayType(kNormalDisplay),
157	fRelTimes(kFALSE), fDataCheck(kFALSE)
158	{
159
160	fName = name ? name : "MJCalibration";
161	fTitle = title ? title : "Tool to create the calibration constants for one calibration run";
162
163	SetUseBlindPixel();
164	SetUsePINDiode();
165
166	}
167
168
169	// --------------------------------------------------------------------------
170	//
171	// Display the results in MStatusDisplay:
172	//
173	// - Add "Calibration" to the MStatusDisplay title
174	// - Retrieve the MGeomCam from MParList
175	// - Initialize the following MHCamera's:
176	// 1) MCalibrationPix::GetMean()
177	// 2) MCalibrationPix::Sigma()
178	// 3) MCalibrationChargePix::GetRSigma()
179	// 4) MCalibrationChargePix::GetRSigmaPerCharge()
180	// 5) MCalibrationChargePix::GetPheFFactorMethod()
181	// 6) MCalibrationChargePix::GetMeanConvFADC2Phe()
182	// 7) MCalibrationChargePix::GetMeanFFactorFADC2Phot()
183	// 8) MCalibrationQEPix::GetQECascadesFFactor()
184	// 9) MCalibrationQEPix::GetQECascadesBlindPixel()
185	// 10) MCalibrationQEPix::GetQECascadesPINDiode()
186	// 11) MCalibrationQEPix::GetQECascadesCombined()
187	// 12) MCalibrationQEPix::IsAverageQEFFactorAvailable()
188	// 13) MCalibrationQEPix::IsAverageQEBlindPixelAvailable()
189	// 14) MCalibrationQEPix::IsAverageQEPINDiodeAvailable()
190	// 15) MCalibrationQEPix::IsAverageQECombinedAvailable()
191	// 16) MCalibrationChargePix::IsHiGainSaturation()
192	// 17) MCalibrationPix::GetHiLoMeansDivided()
193	// 18) MCalibrationPix::GetHiLoSigmasDivided()
194	// 19) MCalibrationChargePix::GetHiGainPickup()
195	// 20) MCalibrationChargePix::GetLoGainPickup()
196	// 21) MCalibrationChargePix::GetHiGainBlackout()
197	// 22) MCalibrationChargePix::GetLoGainBlackout()
198	// 23) MCalibrationPix::IsExcluded()
199	// 24) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnsuitableRun)
200	// 25) MBadPixelsPix::IsUnsuitable(MBadPixelsPix::kUnreliableRun)
201	// 26) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kHiGainOscillating)
202	// 27) MBadPixelsPix::IsUncalibrated(MBadPixelsPix::kLoGainOscillating)
203	// 28) MCalibrationChargePix::GetAbsTimeMean()
204	// 29) MCalibrationChargePix::GetAbsTimeRms()
205	//
206	// If the flag SetFullDisplay() is set, all MHCameras will be displayed.
207	// if the flag SetDataCheckDisplay() is set, only the most important ones are displayed
208	// and otherwise, (default: SetNormalDisplay()), a good selection of plots is given
209	//
210	void MJCalibration::DisplayResult(MParList &plist)
211	{
212	if (!fDisplay)
213	return;
214
215	//
216	// Update display
217	//
218	TString title = fDisplay->GetTitle();
219	title += "-- Calibration ";
220	title += fRuns->GetRunsAsString();
221	title += " --";
222	fDisplay->SetTitle(title);
223
224	//
225	// Get container from list
226	//
227	MGeomCam &geomcam = (MGeomCam)plist.FindObject("MGeomCam");
228
229	// Create histograms to display
230	MHCamera disp1 (geomcam, Form("%s%s","Charge",(fRuns->GetRunsAsFileName()).Data()),
231	"Fitted Mean Charges");
232	MHCamera disp2 (geomcam, Form("%s%s","SigmaCharge",(fRuns->GetRunsAsFileName()).Data()),
233	"Sigma of Fitted Charges");
234	MHCamera disp3 (geomcam, Form("%s%s","RSigma",(fRuns->GetRunsAsFileName()).Data()),
235	"Reduced Sigmas");
236	MHCamera disp4 (geomcam, Form("%s%s","RSigmaPerCharge",(fRuns->GetRunsAsFileName()).Data()),
237	"Reduced Sigma per Charge");
238	MHCamera disp5 (geomcam, Form("%s%s","NumPhes",(fRuns->GetRunsAsFileName()).Data()),
239	"Nr. of Phe's (F-Factor Method)");
240	MHCamera disp6 (geomcam, Form("%s%s","ConvFADC2Phes",(fRuns->GetRunsAsFileName()).Data()),
241	"Conversion Factor (F-Factor Method)");
242	MHCamera disp7 (geomcam, Form("%s%s","TotalFFactor",(fRuns->GetRunsAsFileName()).Data()),
243	"Total F-Factor (F-Factor Method)");
244	MHCamera disp8 (geomcam, Form("%s%s","CascadesQEFFactor",(fRuns->GetRunsAsFileName()).Data()),
245	"Cascades QE (F-Factor Method)");
246	MHCamera disp9 (geomcam, Form("%s%s","CascadesQEBlindPix",(fRuns->GetRunsAsFileName()).Data()),
247	"Cascades QE (Blind Pixel Method)");
248	MHCamera disp10(geomcam, Form("%s%s","CascadesQEPINDiode",(fRuns->GetRunsAsFileName()).Data()),
249	"Cascades QE (PIN Diode Method)");
250	MHCamera disp11(geomcam, Form("%s%s","CascadesQECombined",(fRuns->GetRunsAsFileName()).Data()),
251	"Cascades QE (Combined Method)");
252	MHCamera disp12(geomcam, Form("%s%s","FFactorValid",(fRuns->GetRunsAsFileName()).Data()),
253	"Pixels with valid F-Factor calibration");
254	MHCamera disp13(geomcam, Form("%s%s","BlindPixelValid",(fRuns->GetRunsAsFileName()).Data()),
255	"Pixels with valid BlindPixel calibration");
256	MHCamera disp14(geomcam, Form("%s%s","PINdiodeValid",(fRuns->GetRunsAsFileName()).Data()),
257	"Pixels with valid PINDiode calibration");
258	MHCamera disp15(geomcam, Form("%s%s","CombinedValid",(fRuns->GetRunsAsFileName()).Data()),
259	"Pixels with valid Combined calibration");
260	MHCamera disp16(geomcam, Form("%s%s","Saturation",(fRuns->GetRunsAsFileName()).Data()),
261	"Pixels with saturated Hi Gain");
262	MHCamera disp17(geomcam, Form("%s%s","ConversionMeans",(fRuns->GetRunsAsFileName()).Data()),
263	"Conversion HiGain.vs.LoGain Means");
264	MHCamera disp18(geomcam, Form("%s%s","ConversionSigmas",(fRuns->GetRunsAsFileName()).Data()),
265	"Conversion HiGain.vs.LoGain Sigmas");
266	MHCamera disp19(geomcam, Form("%s%s","HiGainPickup",(fRuns->GetRunsAsFileName()).Data()),
267	"Number Pickup events Hi Gain");
268	MHCamera disp20(geomcam, Form("%s%s","LoGainPickup",(fRuns->GetRunsAsFileName()).Data()),
269	"Number Pickup events Lo Gain");
270	MHCamera disp21(geomcam, Form("%s%s","HiGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
271	"Number Blackout events Hi Gain");
272	MHCamera disp22(geomcam, Form("%s%s","LoGainBlackout",(fRuns->GetRunsAsFileName()).Data()),
273	"Number Blackout events Lo Gain");
274	MHCamera disp23(geomcam, Form("%s%s","Excluded",(fRuns->GetRunsAsFileName()).Data()),
275	"Pixels previously excluded");
276	MHCamera disp24(geomcam, Form("%s%s","UnSuitable",(fRuns->GetRunsAsFileName()).Data()),
277	"Pixels not suited for further analysis");
278	MHCamera disp25(geomcam, Form("%s%s","UnReliable",(fRuns->GetRunsAsFileName()).Data()),
279	"Pixels not reliable for further analysis");
280	MHCamera disp26(geomcam, Form("%s%s","HiGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
281	"Oscillating Pixels High Gain");
282	MHCamera disp27(geomcam, Form("%s%s","LoGainOscillating",(fRuns->GetRunsAsFileName()).Data()),
283	"Oscillating Pixels Low Gain");
284	MHCamera disp28(geomcam, Form("%s%s","AbsTimeMean",(fRuns->GetRunsAsFileName()).Data()),
285	"Abs. Arrival Times");
286	MHCamera disp29(geomcam, Form("%s%s","AbsTimeRms",(fRuns->GetRunsAsFileName()).Data()),
287	"RMS of Arrival Times");
288	MHCamera disp30(geomcam, Form("%s%s","MeanTime",(fRuns->GetRunsAsFileName()).Data()),
289	"Mean Rel. Arrival Times");
290	MHCamera disp31(geomcam, Form("%s%s","SigmaTime",(fRuns->GetRunsAsFileName()).Data()),
291	"Sigma Rel. Arrival Times");
292	MHCamera disp32(geomcam, Form("%s%s","TimeProb",(fRuns->GetRunsAsFileName()).Data()),
293	"Probability of Time Fit");
294	MHCamera disp33(geomcam, Form("%s%s","TimeNotFitValid",(fRuns->GetRunsAsFileName()).Data()),
295	"Pixels with not valid fit results");
296	MHCamera disp34(geomcam, Form("%s%s","TimeOscillating",(fRuns->GetRunsAsFileName()).Data()),
297	"Oscillating Pixels");
298
299	// Fitted charge means and sigmas
300	disp1.SetCamContent(fCalibrationCam, 0);
301	disp1.SetCamError( fCalibrationCam, 1);
302	disp2.SetCamContent(fCalibrationCam, 2);
303	disp2.SetCamError( fCalibrationCam, 3);
304
305	// Reduced Sigmas and reduced sigmas per charge
306	disp3.SetCamContent(fCalibrationCam, 5);
307	disp3.SetCamError( fCalibrationCam, 6);
308	disp4.SetCamContent(fCalibrationCam, 7);
309	disp4.SetCamError( fCalibrationCam, 8);
310
311	// F-Factor Method
312	disp5.SetCamContent(fCalibrationCam, 9);
313	disp5.SetCamError( fCalibrationCam, 10);
314	disp6.SetCamContent(fCalibrationCam, 11);
315	disp6.SetCamError( fCalibrationCam, 12);
316	disp7.SetCamContent(fCalibrationCam, 13);
317	disp7.SetCamError( fCalibrationCam, 14);
318
319	// Quantum Efficiencies
320	disp8.SetCamContent (fQECam, 0 );
321	disp8.SetCamError (fQECam, 1 );
322	disp9.SetCamContent (fQECam, 2 );
323	disp9.SetCamError (fQECam, 3 );
324	disp10.SetCamContent(fQECam, 4 );
325	disp10.SetCamError (fQECam, 5 );
326	disp11.SetCamContent(fQECam, 6 );
327	disp11.SetCamError (fQECam, 7 );
328
329	// Valid flags
330	disp12.SetCamContent(fQECam, 8 );
331	disp13.SetCamContent(fQECam, 9 );
332	disp14.SetCamContent(fQECam, 10);
333	disp15.SetCamContent(fQECam, 11);
334
335	// Conversion Hi-Lo
336	disp16.SetCamContent(fCalibrationCam, 25);
337	disp17.SetCamContent(fCalibrationCam, 16);
338	disp17.SetCamError (fCalibrationCam, 17);
339	disp18.SetCamContent(fCalibrationCam, 18);
340	disp18.SetCamError (fCalibrationCam, 19);
341
342	// Pickup and Blackout
343	disp19.SetCamContent(fCalibrationCam, 21);
344	disp20.SetCamContent(fCalibrationCam, 22);
345	disp21.SetCamContent(fCalibrationCam, 23);
346	disp22.SetCamContent(fCalibrationCam, 24);
347
348	// Pixels with defects
349	disp23.SetCamContent(fCalibrationCam, 20);
350	disp24.SetCamContent(fBadPixels, 1);
351	disp25.SetCamContent(fBadPixels, 3);
352
353	// Oscillations
354	disp26.SetCamContent(fBadPixels, 10);
355	disp27.SetCamContent(fBadPixels, 11);
356
357	// Arrival Times
358	disp28.SetCamContent(fCalibrationCam, 26);
359	disp28.SetCamError( fCalibrationCam, 27);
360	disp29.SetCamContent(fCalibrationCam, 27);
361
362	disp1.SetYTitle("Q [FADC counts]");
363	disp2.SetYTitle("\\sigma_{Q} [FADC counts]");
364
365	disp3.SetYTitle("\\sqrt{\\sigma^{2}_{Q} - RMS^{2}_{Ped}} [FADC Counts]");
366	disp4.SetYTitle("Red.Sigma/<Q> [1]");
367
368	disp5.SetYTitle("Nr. Phe's [1]");
369	disp6.SetYTitle("Conv.Factor [PhE/FADC counts]");
370	disp7.SetYTitle("Total F-Factor [1]");
371
372	disp8.SetYTitle("QE [1]");
373	disp9.SetYTitle("QE [1]");
374	disp10.SetYTitle("QE [1]");
375	disp11.SetYTitle("QE [1]");
376
377	disp12.SetYTitle("[1]");
378	disp13.SetYTitle("[1]");
379	disp14.SetYTitle("[1]");
380	disp15.SetYTitle("[1]");
381	disp16.SetYTitle("[1]");
382
383	disp17.SetYTitle("<Q>(High)/<Q>(Low) [1]");
384	disp18.SetYTitle("\\sigma_{Q}(High)/\\sigma_{Q}(Low) [1]");
385
386	disp19.SetYTitle("[1]");
387	disp20.SetYTitle("[1]");
388	disp21.SetYTitle("[1]");
389	disp22.SetYTitle("[1]");
390	disp23.SetYTitle("[1]");
391	disp24.SetYTitle("[1]");
392	disp25.SetYTitle("[1]");
393	disp26.SetYTitle("[1]");
394	disp27.SetYTitle("[1]");
395
396	disp28.SetYTitle("Mean Abs. Time [FADC slice]");
397	disp29.SetYTitle("RMS Abs. Time [FADC slices]");
398
399	if (fRelTimes)
400	{
401
402	disp30.SetCamContent(fRelTimeCam,0);
403	disp30.SetCamError( fRelTimeCam,1);
404	disp31.SetCamContent(fRelTimeCam,2);
405	disp31.SetCamError( fRelTimeCam,3);
406	disp32.SetCamContent(fRelTimeCam,4);
407	disp33.SetCamContent(fBadPixels,20);
408	disp34.SetCamContent(fBadPixels,21);
409
410	disp30.SetYTitle("Time Offset [FADC units]");
411	disp31.SetYTitle("Timing resolution [FADC units]");
412	disp32.SetYTitle("P_{Time} [1]");
413	disp33.SetYTitle("[1]");
414	disp34.SetYTitle("[1]");
415	}
416
417	if (fDisplayType == kDataCheckDisplay)
418	{
419	TCanvas &c1 = fDisplay->AddTab("Fit.Charge");
420	c1.Divide(3, 3);
421
422	disp1.CamDraw(c1, 1, 3, 2);
423	disp4.CamDraw(c1, 2, 3, 2);
424	disp28.CamDraw(c1, 3, 3, 2);
425
426	// F-Factor
427	TCanvas &c2 = fDisplay->AddTab("Phe's");
428	c2.Divide(3,4);
429
430	disp6.CamDraw(c2, 1, 3, 2, 1);
431	disp7.CamDraw(c2, 2, 3, 2, 1);
432	disp8.CamDraw(c2, 3, 3, 2, 1);
433
434	// QE's
435	TCanvas &c3 = fDisplay->AddTab("QE's");
436	c3.Divide(3,4);
437
438	disp8.CamDraw(c3, 1, 3, 2, 1);
439	disp9.CamDraw(c3, 2, 3, 2, 1);
440	disp10.CamDraw(c3, 3, 3, 2, 1);
441
442	// Defects
443	TCanvas &c4 = fDisplay->AddTab("Defect");
444	c4.Divide(2,2);
445
446	disp24.CamDraw(c4, 1, 2, 0);
447	disp25.CamDraw(c4, 2, 2, 0);
448
449	if (fRelTimes)
450	{
451	// Rel. Times
452	TCanvas &c5 = fDisplay->AddTab("Rel. Times");
453	c5.Divide(2,4);
454
455	disp30.CamDraw(c5, 1, 2, 2);
456	disp31.CamDraw(c5, 2, 2, 2);
457	}
458
459
460	return;
461	}
462
463	if (fDisplayType == kNormalDisplay)
464	{
465
466	// Charges
467	TCanvas &c11 = fDisplay->AddTab("Fit.Charge");
468	c11.Divide(2, 4);
469
470	disp1.CamDraw(c11, 1, 2, 5, 1);
471	disp2.CamDraw(c11, 2, 2, 5, 1);
472
473	// Reduced Sigmas
474	TCanvas &c12 = fDisplay->AddTab("Red.Sigma");
475	c12.Divide(2,4);
476
477	disp3.CamDraw(c12, 1, 2, 5, 1);
478	disp4.CamDraw(c12, 2, 2, 5, 1);
479
480	// F-Factor
481	TCanvas &c13 = fDisplay->AddTab("Phe's");
482	c13.Divide(3,4);
483
484	disp5.CamDraw(c13, 1, 3, 5, 1);
485	disp6.CamDraw(c13, 2, 3, 5, 1);
486	disp7.CamDraw(c13, 3, 3, 5, 1);
487
488	// QE's
489	TCanvas &c14 = fDisplay->AddTab("QE's");
490	c14.Divide(4,4);
491
492	disp8.CamDraw(c14, 1, 4, 5, 1);
493	disp9.CamDraw(c14, 2, 4, 5, 1);
494	disp10.CamDraw(c14, 3, 4, 5, 1);
495	disp11.CamDraw(c14, 4, 4, 5, 1);
496
497	// Defects
498	TCanvas &c15 = fDisplay->AddTab("Defect");
499	// c15.Divide(5,2);
500	c15.Divide(4,2);
501
502	/*
503	disp23.CamDraw(c15, 1, 5, 0);
504	disp24.CamDraw(c15, 2, 5, 0);
505	disp25.CamDraw(c15, 3, 5, 0);
506	disp26.CamDraw(c15, 4, 5, 0);
507	disp27.CamDraw(c15, 5, 5, 0);
508	*/
509	disp24.CamDraw(c15, 1, 4, 0);
510	disp25.CamDraw(c15, 2, 4, 0);
511	disp26.CamDraw(c15, 3, 4, 0);
512	disp27.CamDraw(c15, 4, 4, 0);
513
514	// Abs. Times
515	TCanvas &c16 = fDisplay->AddTab("Abs. Times");
516	c16.Divide(2,3);
517
518	disp28.CamDraw(c16, 1, 2, 5);
519	disp29.CamDraw(c16, 2, 2, 5);
520
521	if (fRelTimes)
522	{
523	// Rel. Times
524	TCanvas &c17 = fDisplay->AddTab("Rel. Times");
525	c17.Divide(2,4);
526
527	disp30.CamDraw(c17, 1, 2, 5, 1);
528	disp31.CamDraw(c17, 2, 2, 5, 1);
529	}
530
531	return;
532	}
533
534	if (fDisplayType == kFullDisplay)
535	{
536
537	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationChargeCam");
538
539	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
540	{
541	cam->GetAverageHiGainSector(sector).DrawClone("all");
542	cam->GetAverageLoGainSector(sector).DrawClone("all");
543	}
544
545	// Charges
546	TCanvas &c21 = fDisplay->AddTab("Fit.Charge");
547	c21.Divide(2, 4);
548
549	disp1.CamDraw(c21, 1, 2, 2, 1);
550	disp2.CamDraw(c21, 2, 2, 2, 1);
551
552	// Reduced Sigmas
553	TCanvas &c23 = fDisplay->AddTab("Red.Sigma");
554	c23.Divide(2,4);
555
556	disp3.CamDraw(c23, 1, 2, 2, 1);
557	disp4.CamDraw(c23, 2, 2, 2, 1);
558
559	// F-Factor
560	TCanvas &c24 = fDisplay->AddTab("Phe's");
561	c24.Divide(3,5);
562
563	disp5.CamDraw(c24, 1, 3, 2, 1, 1);
564	disp6.CamDraw(c24, 2, 3, 2, 1, 1);
565	disp7.CamDraw(c24, 3, 3, 2, 1, 1);
566
567	// QE's
568	TCanvas &c25 = fDisplay->AddTab("QE's");
569	c25.Divide(4,5);
570
571	disp8.CamDraw(c25, 1, 4, 2, 1, 1);
572	disp9.CamDraw(c25, 2, 4, 2, 1, 1);
573	disp10.CamDraw(c25, 3, 4, 2, 1, 1);
574	disp11.CamDraw(c25, 4, 4, 2, 1, 1);
575
576	// Validity
577	TCanvas &c26 = fDisplay->AddTab("Valid");
578	c26.Divide(4,2);
579
580	disp12.CamDraw(c26, 1, 4, 0);
581	disp13.CamDraw(c26, 2, 4, 0);
582	disp14.CamDraw(c26, 3, 4, 0);
583	disp15.CamDraw(c26, 4, 4, 0);
584
585	// Other info
586	TCanvas &c27 = fDisplay->AddTab("HiLoGain");
587	c27.Divide(3,3);
588
589	disp16.CamDraw(c27, 1, 3, 0);
590	disp17.CamDraw(c27, 2, 3, 1);
591	disp18.CamDraw(c27, 3, 3, 1);
592
593	// Pickup
594	TCanvas &c28 = fDisplay->AddTab("Pickup");
595	c28.Divide(4,2);
596
597	disp19.CamDraw(c28, 1, 4, 0);
598	disp20.CamDraw(c28, 2, 4, 0);
599	disp21.CamDraw(c28, 3, 4, 0);
600	disp22.CamDraw(c28, 4, 4, 0);
601
602	// Defects
603	TCanvas &c29 = fDisplay->AddTab("Defect");
604	// c29.Divide(5,2);
605	c29.Divide(4,2);
606
607	disp24.CamDraw(c29, 1, 4, 0);
608	disp25.CamDraw(c29, 2, 4, 0);
609	disp26.CamDraw(c29, 3, 4, 0);
610	disp27.CamDraw(c29, 4, 4, 0);
611
612	// Abs. Times
613	TCanvas &c30 = fDisplay->AddTab("Abs. Times");
614	c30.Divide(2,3);
615
616	disp28.CamDraw(c30, 1, 2, 2);
617	disp29.CamDraw(c30, 2, 2, 1);
618
619	if (fRelTimes)
620	{
621	// Rel. Times
622	TCanvas &c31 = fDisplay->AddTab("Rel. Times");
623	c31.Divide(3,5);
624
625	disp30.CamDraw(c31, 1, 3, 2, 1, 1);
626	disp31.CamDraw(c31, 2, 3, 2, 1, 1);
627	disp32.CamDraw(c31, 3, 3, 4, 1, 1);
628
629	// Time Defects
630	TCanvas &c32 = fDisplay->AddTab("Time Def.");
631	c32.Divide(2,2);
632
633	disp33.CamDraw(c32, 1, 2, 0);
634	disp34.CamDraw(c32, 2, 2, 0);
635
636	MHCalibrationCam cam = (MHCalibrationCam)plist.FindObject("MHCalibrationRelTimeCam");
637
638	for (Int_t sector=1;sector<cam->GetAverageSectors();sector++)
639	{
640	cam->GetAverageHiGainSector(sector).DrawClone("fourierevents");
641	cam->GetAverageLoGainSector(sector).DrawClone("fourierevents");
642	}
643
644	}
645
646	return;
647	}
648	}
649
650
651
652	// --------------------------------------------------------------------------
653	//
654	// Find the colour of the pulsing LED:
655	// - If the run number is smaller than gkIFAEBoxInaugurationRun, take MCalibrationCam::kCT1
656	// - Otherwise find the colour out of the run name
657	// - If no colour is found, return kFALSE
658	//
659	Bool_t MJCalibration::FindColor()
660	{
661
662	const UInt_t nruns = fRuns->GetNumRuns();
663
664	if (nruns == 0)
665	return kFALSE;
666
667	TArrayI arr = fRuns->GetRuns();
668
669	if (arr[nruns-1] < gkIFAEBoxInaugurationRun)
670	{
671	*fLog << "Found colour kCT1 in runs: " << fRuns->GetRunsAsString() << endl;
672	fColor = MCalibrationCam::kCT1;
673	return kTRUE;
674	}
675
676	TString filenames;
677	((MDirIter*)fRuns)->Reset();
678
679	while (!(filenames=((MDirIter*)fRuns)->Next()).IsNull())
680	{
681
682	filenames.ToLower();
683
684	//
685	// Here starts the list of runs where the shifters did not put
686	// a colour, but which have been found out by other means
687	//
688	if (filenames.Contains("_27474_"))
689	if (fColor == MCalibrationCam::kNONE)
690	{
691	*fLog << "Sorry, run 27474 was taken with CLOSED LIDS. It should not be used! "
692	<< "Selected runs were: " << filenames << endl;
693	fColor = MCalibrationCam::kNONE;
694	return kFALSE;
695	}
696	else if (fColor != MCalibrationCam::kNONE)
697	{
698	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
699	return kFALSE;
700	}
701
702	if (filenames.Contains("_26924_"))
703	if (fColor == MCalibrationCam::kNONE)
704	{
705	*fLog << "Found colour: kGREEN in " << filenames << endl;
706	fColor = MCalibrationCam::kGREEN;
707	}
708	else if (fColor != MCalibrationCam::kGREEN)
709	{
710	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
711	return kFALSE;
712	}
713
714
715	if (filenames.Contains("_26568_"))
716	if (fColor == MCalibrationCam::kNONE)
717	{
718	*fLog << "Found colour: kGREEN in " << filenames << endl;
719	fColor = MCalibrationCam::kGREEN;
720	}
721	else if (fColor != MCalibrationCam::kGREEN)
722	{
723	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
724	return kFALSE;
725	}
726
727	if (filenames.Contains("_26412_"))
728	if (fColor == MCalibrationCam::kNONE)
729	{
730	*fLog << "Found colour: kGREEN in " << filenames << endl;
731	fColor = MCalibrationCam::kGREEN;
732	}
733	else if (fColor != MCalibrationCam::kGREEN)
734	{
735	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
736	return kFALSE;
737	}
738
739
740	if (filenames.Contains("_26409_"))
741	if (fColor == MCalibrationCam::kNONE)
742	{
743	*fLog << "Found colour: kGREEN in " << filenames << endl;
744	fColor = MCalibrationCam::kGREEN;
745	}
746	else if (fColor != MCalibrationCam::kGREEN)
747	{
748	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
749	return kFALSE;
750	}
751
752	if (filenames.Contains("_26408_"))
753	if (fColor == MCalibrationCam::kNONE)
754	{
755	*fLog << "Found colour: kGREEN in " << filenames << endl;
756	fColor = MCalibrationCam::kGREEN;
757	}
758	else if (fColor != MCalibrationCam::kGREEN)
759	{
760	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
761	return kFALSE;
762	}
763
764
765	if (filenames.Contains("_26402_"))
766	if (fColor == MCalibrationCam::kNONE)
767	{
768	*fLog << "Found colour: kBLUE in " << filenames << endl;
769	fColor = MCalibrationCam::kBLUE;
770	}
771	else if (fColor != MCalibrationCam::kBLUE)
772	{
773	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
774	return kFALSE;
775	}
776
777	if (filenames.Contains("_20661_"))
778	if (fColor == MCalibrationCam::kNONE)
779	{
780	*fLog << "Found colour: kGREEN in " << filenames << endl;
781	fColor = MCalibrationCam::kGREEN;
782	}
783	else if (fColor != MCalibrationCam::kGREEN)
784	{
785	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
786	return kFALSE;
787	}
788
789	if (filenames.Contains("_20660_"))
790	if (fColor == MCalibrationCam::kNONE)
791	{
792	*fLog << "Found colour: kGREEN in " << filenames << endl;
793	fColor = MCalibrationCam::kGREEN;
794	}
795	else if (fColor != MCalibrationCam::kGREEN)
796	{
797	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
798	return kFALSE;
799	}
800
801	//
802	// Here start the runs where the shifter put
803	// the colour
804	//
805	if (filenames.Contains("green"))
806	if (fColor == MCalibrationCam::kNONE)
807	{
808	*fLog << "Found colour: kGREEN in " << filenames << endl;
809	fColor = MCalibrationCam::kGREEN;
810	}
811	else if (fColor != MCalibrationCam::kGREEN)
812	{
813	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
814	return kFALSE;
815	}
816
817	if (filenames.Contains("blue"))
818	if (fColor == MCalibrationCam::kNONE)
819	{
820	*fLog << "Found colour: kBLUE in " << filenames << endl;
821	fColor = MCalibrationCam::kBLUE;
822	}
823	else if (fColor != MCalibrationCam::kBLUE)
824	{
825	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
826	return kFALSE;
827	}
828
829	if (filenames.Contains("uv"))
830	if (fColor == MCalibrationCam::kNONE)
831	{
832	*fLog << "Found colour: kUV in " << filenames << endl;
833	fColor = MCalibrationCam::kUV;
834	}
835	else if (fColor != MCalibrationCam::kUV)
836	{
837	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
838	return kFALSE;
839	}
840
841	if (filenames.Contains("ct1"))
842	if (fColor == MCalibrationCam::kNONE)
843	{
844	*fLog << "Found colour: kCT1 in " << filenames << endl;
845	fColor = MCalibrationCam::kCT1;
846	}
847	else if (fColor != MCalibrationCam::kCT1)
848	{
849	*fLog << err << "Different colour found in " << filenames << "... abort" << endl;
850	return kFALSE;
851	}
852
853	}
854
855	if (fColor == MCalibrationCam::kNONE)
856	{
857	*fLog << "No colour found in filenames of runs: " << fRuns->GetRunsAsString()
858	<< "... abort" << endl;
859	return kFALSE;
860	}
861
862	return kTRUE;
863	}
864
865
866
867
868	// --------------------------------------------------------------------------
869	//
870	// Retrieve the output file written by WriteResult()
871	//
872	const char* MJCalibration::GetOutputFile() const
873	{
874
875	if (!fRuns)
876	return "";
877
878	return Form("%s/%s-F1.root", (const char)fOutputPath, (const char)fRuns->GetRunsAsFileName());
879	}
880
881
882	Bool_t MJCalibration::IsUseBlindPixel() const
883	{
884	return TESTBIT(fDevices,kUseBlindPixel);
885	}
886
887
888	Bool_t MJCalibration::IsUsePINDiode() const
889	{
890	return TESTBIT(fDevices,kUsePINDiode);
891	}
892
893
894
895
896
897	// --------------------------------------------------------------------------
898	//
899	// Call the ProcessFile(MPedestalCam)
900	//
901	Bool_t MJCalibration::Process(MPedestalCam &pedcam)
902	{
903	if (!ReadCalibrationCam())
904	return ProcessFile(pedcam);
905
906	return kTRUE;
907	}
908
909	// --------------------------------------------------------------------------
910	//
911	// Execute the task list and the eventloop:
912	//
913	// - Check if there are fRuns, otherwise return
914	// - Check the colour of the files in fRuns (FindColor()), otherwise return
915	// - Check for consistency between run numbers and number of files
916	// - Add fRuns to MReadMarsFile
917	// - Put into MParList:
918	// 1) MPedestalCam (pedcam)
919	// 2) MCalibrationQECam (fQECam)
920	// 3) MCalibrationChargeCam (fCalibrationCam)
921	// 4) MCalibrationRelTimeCam (fRelTimeCam) (only if flag fRelTimes is chosen)
922	// 5) MBadPixelsCam (fBadPixels)
923	// 6) MCalibrationChargePINDiode
924	// 7) MCalibrationChargeBlindPix
925	// - Put into the MTaskList:
926	// 1) MReadMarsFile
927	// 2) MBadPixelsMerge
928	// 3) MGeomApply
929	// 4) MExtractor
930	// 5) MExtractPINDiode
931	// 6) MExtractBlindPixel
932	// 7) MExtractTime (only if flag fRelTimes is chosen)
933	// 8) MContinue(MFCosmics)
934	// 9) MFillH("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode")
935	// 10) MFillH("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel")
936	// 11) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
937	// 12) MFillH("MHCalibrationChargeCam", "MExtractedSignalCam")
938	// 13) MCalibrationChargeCalc
939	// 14) MFillH("MHCalibrationRelTimeCam", "MArrivalTimeCam") (only if flag fRelTimes is chosen)
940	// 15) MCalibrationRelTimeCalc
941	// - Execute MEvtLoop
942	// - DisplayResult()
943	// - WriteResult()
944	//
945	Bool_t MJCalibration::ProcessFile(MPedestalCam &pedcam)
946	{
947	if (!fRuns)
948	{
949	*fLog << err << "No Runs choosen... abort." << endl;
950	return kFALSE;
951	}
952
953	if (fRuns->GetNumRuns() != fRuns->GetNumEntries())
954	{
955	*fLog << err << "Number of files found doesn't match number of runs... abort."
956	<< fRuns->GetNumRuns() << " vs. " << fRuns->GetNumEntries() << endl;
957	return kFALSE;
958	}
959
960	*fLog << inf;
961	fLog->Separator(GetDescriptor());
962
963	if (!FindColor())
964	return kFALSE;
965
966	*fLog << "Calculate MCalibrationCam from Runs " << fRuns->GetRunsAsString() << endl;
967	*fLog << endl;
968
969	// Setup Tasklist
970	MParList plist;
971	MTaskList tlist;
972	plist.AddToList(&tlist);
973
974	MReadMarsFile read("Events");
975	MRawFileRead rawread(NULL);
976
977	if (fDataCheck)
978	{
979	rawread.AddFiles(*fRuns);
980	tlist.AddToList(&rawread);
981	}
982	else
983	{
984	read.DisableAutoScheme();
985	static_cast<MRead&>(read).AddFiles(*fRuns);
986	tlist.AddToList(&read);
987	}
988
989	plist.AddToList(&pedcam);
990	plist.AddToList(&fBadPixels);
991	plist.AddToList(&fQECam);
992	plist.AddToList(&fCalibrationCam);
993	plist.AddToList(&fCalibrationBlindPix);
994	plist.AddToList(&fCalibrationPINDiode);
995	plist.AddToList(&fRelTimeCam);
996
997	MGeomApply apply;
998	// MBadPixelsMerge merge(&fBadPixels);
999	MExtractPINDiode pinext;
1000	MExtractBlindPixel blindext;
1001	MExtractSlidingWindow extract2;
1002	MExtractTimeSpline timespline;
1003	MCalibrationChargeCalc calcalc;
1004	calcalc.SetOutputPath(fOutputPath);
1005	calcalc.SetOutputFile(Form("%s-ChargeCalibStat.txt",(const char*)fRuns->GetRunsAsFileName()));
1006
1007	MCalibrationRelTimeCalc timecalc;
1008	timecalc.SetOutputPath(fOutputPath);
1009	timecalc.SetOutputFile(Form("%s-TimeCalibStat.txt",(const char*)fRuns->GetRunsAsFileName()));
1010
1011	//
1012	// As long as there are no DM's, have to colour by hand
1013	//
1014	calcalc.SetPulserColor(fColor);
1015
1016	MFillH fillpin("MHCalibrationChargePINDiode", "MExtractedSignalPINDiode");
1017	MFillH fillbnd("MHCalibrationChargeBlindPix", "MExtractedSignalBlindPixel");
1018	MFillH fillcam("MHCalibrationChargeCam", "MExtractedSignalCam");
1019	MFillH filltme("MHCalibrationRelTimeCam", "MArrivalTimeCam");
1020	fillpin.SetNameTab("PINDiode");
1021	fillbnd.SetNameTab("BlindPix");
1022	fillcam.SetNameTab("Charge");
1023	filltme.SetNameTab("RelTimes");
1024
1025	if (fDataCheck)
1026	{
1027	fillcam.SetDrawOption("datacheck");
1028	fillbnd.SetDrawOption("datacheck");
1029	fillpin.SetDrawOption("datacheck");
1030	filltme.SetDrawOption("datacheck");
1031	}
1032
1033	if (fDisplayType == kFullDisplay)
1034	{
1035	fillcam.SetDrawOption("all");
1036	filltme.SetDrawOption("all");
1037	}
1038
1039
1040	//
1041	// Apply a filter against cosmics
1042	// (will have to be needed in the future
1043	// when the calibration hardware-trigger is working)
1044	//
1045	MFCosmics cosmics;
1046	MContinue cont(&cosmics);
1047
1048	// tlist.AddToList(&merge);
1049	tlist.AddToList(&apply);
1050
1051	if (fExtractor)
1052	tlist.AddToList(fExtractor);
1053	else
1054	{
1055	*fLog << warn << GetDescriptor()
1056	<< ": No extractor has been chosen, take default MExtractSlidingWindow " << endl;
1057	tlist.AddToList(&extract2);
1058	}
1059
1060
1061	tlist.AddToList(&pinext);
1062	tlist.AddToList(&blindext);
1063
1064	if (fRelTimes)
1065	{
1066	if (fTimeExtractor)
1067	tlist.AddToList(fTimeExtractor);
1068	else
1069	{
1070	*fLog << warn << GetDescriptor()
1071	<< ": No extractor has been chosen, take default MTimeExtractSpline " << endl;
1072	tlist.AddToList(&timespline);
1073	}
1074	}
1075
1076	if (fColor == MCalibrationCam::kCT1)
1077	tlist.AddToList(&cont);
1078
1079	tlist.AddToList(&fillcam);
1080
1081	if (IsUsePINDiode())
1082	tlist.AddToList(&fillpin);
1083	if (IsUseBlindPixel())
1084	tlist.AddToList(&fillbnd);
1085
1086	tlist.AddToList(&calcalc);
1087
1088	if (fRelTimes)
1089	{
1090	tlist.AddToList(&filltme);
1091	tlist.AddToList(&timecalc);
1092	}
1093
1094
1095	// Create and setup the eventloop
1096	MEvtLoop evtloop(fName);
1097	evtloop.SetParList(&plist);
1098	evtloop.SetDisplay(fDisplay);
1099	evtloop.SetLogStream(fLog);
1100
1101	// Execute first analysis
1102	if (!evtloop.Eventloop())
1103	{
1104	*fLog << err << GetDescriptor() << ": Failed." << endl;
1105	return kFALSE;
1106	}
1107
1108	tlist.PrintStatistics();
1109
1110	DisplayResult(plist);
1111
1112	if (!WriteResult())
1113	return kFALSE;
1114
1115	*fLog << inf << GetDescriptor() << ": Done." << endl;
1116
1117	return kTRUE;
1118	}
1119
1120	// --------------------------------------------------------------------------
1121	//
1122	// Read the following containers from GetOutputFile()
1123	// - MCalibrationChargeCam
1124	// - MCalibrationQECam
1125	// - MBadPixelsCam
1126	//
1127	Bool_t MJCalibration::ReadCalibrationCam()
1128	{
1129
1130	const TString fname = GetOutputFile();
1131
1132	if (gSystem->AccessPathName(fname, kFileExists))
1133	{
1134	*fLog << err << "Input file " << fname << " doesn't exist." << endl;
1135	return kFALSE;
1136	}
1137
1138	*fLog << inf << "Reading from file: " << fname << endl;
1139
1140	TFile file(fname, "READ");
1141	if (fCalibrationCam.Read()<=0)
1142	{
1143	*fLog << err << "Unable to read MCalibrationChargeCam from " << fname << endl;
1144	return kFALSE;
1145	}
1146
1147	if (fQECam.Read()<=0)
1148	{
1149	*fLog << err << "Unable to read MCalibrationQECam from " << fname << endl;
1150	return kFALSE;
1151	}
1152
1153
1154	if (fRelTimes)
1155	if (fRelTimeCam.Read()<=0)
1156	{
1157	*fLog << err << "Unable to read MCalibrationRelTimeCam from " << fname << endl;
1158	return kFALSE;
1159	}
1160
1161	if (file.FindKey("MBadPixelsCam"))
1162	{
1163	MBadPixelsCam bad;
1164	if (bad.Read()<=0)
1165	{
1166	*fLog << err << "Unable to read MBadPixelsCam from " << fname << endl;
1167	return kFALSE;
1168	}
1169	fBadPixels.Merge(bad);
1170	}
1171
1172	if (fDisplay /&& !fDisplay->GetCanvas("Pedestals")/) // FIXME!
1173	fDisplay->Read();
1174
1175	return kTRUE;
1176	}
1177
1178
1179	// --------------------------------------------------------------------------
1180	//
1181	// Set the path for output files, written by WriteResult()
1182	//
1183	void MJCalibration::SetOutputPath(const char *path)
1184	{
1185	fOutputPath = path;
1186	if (fOutputPath.EndsWith("/"))
1187	fOutputPath = fOutputPath(0, fOutputPath.Length()-1);
1188	}
1189
1190	// --------------------------------------------------------------------------
1191	//
1192	// Set the useage of the Blind Pixel device
1193	//
1194	void MJCalibration::SetUseBlindPixel(const Bool_t b)
1195	{
1196	b ? SETBIT(fDevices,kUseBlindPixel) : CLRBIT(fDevices,kUseBlindPixel);
1197	}
1198
1199	// --------------------------------------------------------------------------
1200	//
1201	// Set the useage of the PIN Diode device
1202	//
1203	void MJCalibration::SetUsePINDiode(const Bool_t b)
1204	{
1205	b ? SETBIT(fDevices,kUsePINDiode) : CLRBIT(fDevices,kUsePINDiode);
1206	}
1207
1208	// --------------------------------------------------------------------------
1209	//
1210	// Write the result into the output file GetOutputFile(), if fOutputPath exists.
1211	//
1212	// The following containers are written:
1213	// - MStatusDisplay
1214	// - MCalibrationChargeCam
1215	// - MCalibrationChargeBlindPix
1216	// - MCalibrationQECam
1217	// - MBadPixelsCam
1218	//
1219	Bool_t MJCalibration::WriteResult()
1220	{
1221	if (fOutputPath.IsNull())
1222	return kTRUE;
1223
1224	const TString oname(GetOutputFile());
1225
1226	*fLog << inf << "Writing to file: " << oname << endl;
1227
1228	TFile file(oname, "UPDATE");
1229
1230	if (fDisplay && fDisplay->Write()<=0)
1231	{
1232	*fLog << err << "Unable to write MStatusDisplay to " << oname << endl;
1233	return kFALSE;
1234	}
1235
1236	if (fCalibrationCam.Write()<=0)
1237	{
1238	*fLog << err << "Unable to write MCalibrationChargeCam to " << oname << endl;
1239	return kFALSE;
1240	}
1241
1242	if (fCalibrationBlindPix.Write()<=0)
1243	{
1244	*fLog << err << "Unable to write MCalibrationChargeBlindPix to " << oname << endl;
1245	return kFALSE;
1246	}
1247
1248	if (fCalibrationPINDiode.Write()<=0)
1249	{
1250	*fLog << err << "Unable to write MCalibrationChargePINDiode to " << oname << endl;
1251	return kFALSE;
1252	}
1253
1254	if (fQECam.Write()<=0)
1255	{
1256	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1257	return kFALSE;
1258	}
1259
1260	if (fRelTimes)
1261	if (fRelTimeCam.Write()<=0)
1262	{
1263	*fLog << err << "Unable to write MCalibrationQECam to " << oname << endl;
1264	return kFALSE;
1265	}
1266
1267	if (fBadPixels.Write()<=0)
1268	{
1269	*fLog << err << "Unable to write MBadPixelsCam to " << oname << endl;
1270	return kFALSE;
1271	}
1272
1273	return kTRUE;
1274
1275	}
1276

Note: See TracBrowser for help on using the repository browser.

Download in other formats: