Context Navigation

source: trunk/MagicSoft/Mars/mjobs/MJSimulation.cc@ 9332

Visit:

Last change on this file since 9332 was 9332, checked in by tbretz, 16 years ago
* empty log message *
File size: 25.0 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2009 <mailto:tbretz@astro.uni-wuerzburg.de>
19	!
20	! Copyright: MAGIC Software Development, 2000-2009
21	!
22	!
23	\* ======================================================================== */
24
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJSimulation
28	//
29	//
30	// Force reading a corsika file even if the footer (RUNE-section) is missing
31	// by setting fForceMode to kTRUE or from the resource file by
32	//
33	// ForceMode: Yes
34	//
35	//
36	// To switch off the simulation of the camera electronics, use:
37	//
38	// Camera: Off
39	//
40	// Note, that the border of the camera and the propertied of the cones
41	// are still simulated (simply because it is fast). Furthermore, this
42	// switches off the trigger for the output, i.e. all data which deposits
43	// at least one photon in at least one pixel is written to the output file.
44	//
45	//
46	// In case of a pedestal or calibration run the artificial trigger can
47	// be "switched off" and the cosmics trrigger "switched on" by setting
48	// fForceTrigger to kTRUE or from the resource file by
49	//
50	// ForceTrigger: Yes
51	//
52	//
53	/////////////////////////////////////////////////////////////////////////////
54	#include "MJSimulation.h"
55
56	#include <TEnv.h>
57	#include <TCanvas.h>
58
59	// Core
60	#include "MLog.h"
61	#include "MLogManip.h"
62
63	#include "MArgs.h"
64	//#include "MDirIter.h"
65	#include "MParList.h"
66	#include "MTaskList.h"
67	#include "MEvtLoop.h"
68
69	#include "MStatusDisplay.h"
70
71	// Tasks
72	#include "MCorsikaRead.h"
73	#include "MContinue.h"
74	#include "MFillH.h"
75	#include "MGeomApply.h"
76	#include "MHillasCalc.h"
77	#include "MImgCleanStd.h"
78	#include "MWriteRootFile.h"
79
80	#include "MSimMMCS.h"
81	#include "MSimAbsorption.h"
82	#include "MSimReflector.h"
83	#include "MSimPointingPos.h"
84	#include "MSimPSF.h"
85	#include "MSimGeomCam.h"
86	#include "MSimSignalCam.h"
87	#include "MSimAPD.h"
88	#include "MSimExcessNoise.h"
89	#include "MSimCamera.h"
90	#include "MSimTrigger.h"
91	#include "MSimReadout.h"
92	#include "MSimRandomPhotons.h"
93	#include "MSimBundlePhotons.h"
94	#include "MSimCalibrationSignal.h"
95
96	// Histograms
97	#include "MBinning.h"
98
99	#include "MHn.h"
100	#include "MHCamera.h"
101	#include "MHCamEvent.h"
102	#include "MHPhotonEvent.h"
103
104	// Container
105	#include "MRawRunHeader.h"
106	#include "MParameters.h"
107	#include "MReflector.h"
108	#include "MParEnv.h"
109	#include "MPulseShape.h"
110	#include "MGeomCam.h"
111
112	#include "MPedestalCam.h"
113	#include "MPedestalPix.h"
114
115	ClassImp(MJSimulation);
116
117	using namespace std;
118
119	// --------------------------------------------------------------------------
120	//
121	// Default constructor.
122	//
123	// Sets fRuns to 0, fExtractor to NULL, fDataCheck to kFALSE
124	//
125	MJSimulation::MJSimulation(const char name, const char title)
126	: fForceMode(kFALSE), fCamera(kTRUE) ,fForceTrigger(kFALSE)
127	{
128	fName = name ? name : "MJSimulation";
129	fTitle = title ? title : "Standard analysis and reconstruction";
130	}
131
132	Bool_t MJSimulation::CheckEnvLocal()
133	{
134	fForceMode = GetEnv("ForceMode", fForceMode);
135	fForceTrigger = GetEnv("ForceTrigger", fForceTrigger);
136	fCamera = GetEnv("Camera", fCamera);
137
138	return kTRUE;
139	}
140
141	Bool_t MJSimulation::WriteResult(const MParList &plist)
142	{
143	if (fPathOut.IsNull())
144	{
145	*fLog << inf << "No output path specified via SetPathOut - no output written." << endl;
146	return kTRUE;
147	}
148
149	TObjArray cont;
150	cont.Add(const_cast<TEnv*>(GetEnv()));
151	//cont.Add(const_cast<MSequence*>(&fSequence));
152
153	cont.Add(plist.FindObject("MPulseShape"));
154	cont.Add(plist.FindObject("Reflector"));
155	cont.Add(plist.FindObject("MGeomCam"));
156	cont.Add(plist.FindObject("GeomCones"));
157
158	if (fDisplay)
159	{
160	// TString title = "-- Reflector: ";
161	// title += fSequence.GetSequence();
162	// title += " --";
163	// fDisplay->SetTitle(title, kFALSE);
164	fDisplay->SetTitle("Ceres", kFALSE);
165
166	cont.Add(fDisplay);
167	}
168
169	// const TString oname = Form("reflector%08d.root", fSequence.GetSequence());
170	const TString oname = "ceres.root";
171	return WriteContainer(cont, oname, "RECREATE");
172	}
173
174	void MJSimulation::SetupHist(MHn &hist) const
175	{
176	hist.AddHist("MCorsikaEvtHeader.fTotalEnergy");
177	hist.InitName("Energy");
178	hist.InitTitle("Energy;E [GeV]");
179	hist.SetLog(kTRUE, kTRUE, kFALSE);
180
181	hist.AddHist("MPhotonEvent.GetNumExternal");
182	hist.InitName("Size");
183	hist.InitTitle("Size;S [#]");
184	hist.SetLog(kTRUE, kTRUE, kFALSE);
185
186	hist.AddHist("-MCorsikaEvtHeader.fX/100","-MCorsikaEvtHeader.fY/100");
187	hist.SetDrawOption("colz");
188	hist.InitName("Impact;Impact;Impact");
189	hist.InitTitle("Impact;West <--> East [m];South <--> North [m]");
190
191	hist.AddHist("MCorsikaEvtHeader.fFirstInteractionHeight/100000");
192	hist.InitName("Height");
193	hist.InitTitle("FirstInteractionHeight;h [km]");
194
195	hist.AddHist("MCorsikaEvtHeader.fAzTMath::RadToDeg()", "MCorsikaEvtHeader.fZdTMath::RadToDeg()");
196	hist.InitName("SkyOrigin;Az;Zd");
197	hist.InitTitle("Sky Origin;Az [deg];Zd [deg]");
198	hist.SetDrawOption("colz");
199
200	TString sin2 = "sin(MCorsikaEvtHeader.fZd)sin(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
201	TString cos2 = "cos(MCorsikaEvtHeader.fZd)cos(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
202	TString cos = "cos(MCorsikaEvtHeader.fAz-MCorsikaRunHeader.fAzMin*TMath::DegToRad())";
203
204	TString form = "acos("+sin2+""+cos+"+"+cos2+")TMath::RadToDeg()";
205
206	hist.AddHist(form);
207	hist.InitName("ViewCone");
208	hist.InitTitle("Incident Angle;\\alpha [\\deg]");
209	}
210
211	Bool_t MJSimulation::Process(const MArgs &args)
212	{
213	/*
214	if (!fSequence.IsValid())
215	{
216	*fLog << err << "ERROR - Sequence invalid!" << endl;
217	return kFALSE;
218	}
219	*/
220
221	//if (!HasWritePermission(GetPathOut()))
222	// return kFALSE;
223
224	*fLog << inf;
225	fLog->Separator(GetDescriptor());
226
227	if (!CheckEnv())
228	return kFALSE;
229
230	*fLog << warn << "FIXME: Monte Carlo simulation: Sequences not supported yet.";
231	//*fLog << fSequence.GetFileName() << endl;
232	*fLog << endl;
233
234	// --------------------------------------------------------------------------------
235
236	//MDirIter iter;
237	//if (fSequence.GetRuns(iter, MSequence::kCalibrated)<=0)
238	// return kFALSE;
239
240	// Setup Parlist
241	MParList plist;
242	plist.AddToList(this); // take care of fDisplay!
243
244	// setup TaskList
245	MTaskList tasks;
246	plist.AddToList(&tasks);
247
248	// --------------------------------------------------------------------------------
249
250	// FIXME: Allow empty GeomCones!
251	MParEnv env0("Reflector");
252	MParEnv env1("GeomCones");
253	MParEnv env2("MGeomCam");
254	env0.SetClassName("MReflector");
255	env1.SetClassName("MGeomCam");
256	env2.SetClassName("MGeomCam");
257	plist.AddToList(&env0);
258	plist.AddToList(&env1);
259	plist.AddToList(&env2);
260
261	plist.FindCreateObj("MPedPhotCam", "MPedPhotFromExtractorRndm");
262
263	MPulseShape shape;
264	plist.AddToList(&shape);
265
266	// * FIXME * FIXME * FIXME *
267	plist.FindCreateObj("MMcRunHeader");
268
269	MRawRunHeader header;
270	header.SetValidMagicNumber();
271	//header.InitFadcType(3);
272
273	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTData);
274	if (args.GetNumArguments()==1)
275	{
276	if (!args.GetArgumentStr(0).CompareTo("pedestal", TString::kIgnoreCase))
277	{
278	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPedestal);
279	header.SetSourceInfo("Pedestal");
280	}
281	if (!args.GetArgumentStr(0).CompareTo("calibration", TString::kIgnoreCase))
282	{
283	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTCalibration);
284	header.SetSourceInfo("Calibration");
285	}
286	if (!args.GetArgumentStr(0).CompareTo("pointrun", TString::kIgnoreCase))
287	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPointRun);
288	}
289
290	// FIXME: Move to MSimPointingPos, MSimCalibrationSignal
291	// Can we use this as input for MSimPointingPos?
292	header.SetObservation("On", "MonteCarlo");
293	plist.AddToList(&header);
294	// ++++++++ FIXME FIXME FIXME +++++++++++++
295
296	/*
297	MPedestalCam pedcam;
298	pedcam.Init(geomcam.GetNumPixels());
299	for (UInt_t i=0; i<geomcam.GetNumPixels(); i++)
300	pedcam[i].Set(128./header.GetScale(), 22.5/header.GetScale());
301	plist.AddToList(&pedcam);
302	*/
303
304	// -------------------------------------------------------------------
305
306	MCorsikaRead read;
307	read.SetForceMode(fForceMode);
308
309	for (int i=0; i<args.GetNumArguments();i ++)
310	read.AddFile(args.GetArgumentStr(i));
311
312	MSimMMCS simmmcs;
313
314	MSimAbsorption absapd("PhotonDetectionEfficiency");
315	MSimAbsorption absmir("MirrorReflectivity");
316	MSimAbsorption cones("ConesAngularAcceptance");
317	cones.SetUseTheta();
318
319	MSimPointingPos pointing;
320
321	MSimReflector reflect;
322	reflect.SetNameGeomCam("GeomCones");
323	// MSimStarField stars;
324
325	MContinue cont1("MPhotonEvent.GetNumPhotons<1", "ContEmpty1");
326	MContinue cont2("MPhotonEvent.GetNumPhotons<1", "ContEmpty2");
327
328	// -------------------------------------------------------------------
329
330	MBinning binse( 100, 1, 100000, "BinningEnergy", "log");
331	MBinning binss( 100, 1, 10000000, "BinningSize", "log");
332	MBinning binsi( 50, -250, 250, "BinningImpact");
333	MBinning binsh( 50, 0, 12, "BinningHeight");
334	MBinning binsaz(360, -360, 360, "BinningAz");
335	MBinning binszd( 70, 0, 70, "BinningZd");
336	MBinning binsvc(155, 0, 31, "BinningViewCone");
337	MBinning binsew(150, 0, 50, "BinningEvtWidth");
338	MBinning binstr("BinningTrigPos");
339
340	plist.AddToList(&binse);
341	plist.AddToList(&binss);
342	plist.AddToList(&binsi);
343	plist.AddToList(&binsh);
344	plist.AddToList(&binszd);
345	plist.AddToList(&binsaz);
346	plist.AddToList(&binsvc);
347	plist.AddToList(&binsew);
348	plist.AddToList(&binstr);
349
350	MHn mhn1, mhn2, mhn3;
351	SetupHist(mhn1);
352	SetupHist(mhn2);
353	SetupHist(mhn3);
354
355	MH3 mhtp("TriggerPos.fVal-IntendedPulsePos.fVal-MPulseShape.GetPulseWidth");
356	mhtp.SetName("TrigPos");
357	mhtp.SetTitle("Trigger position w.r.t. the first photon hitting a detector");
358
359	MH3 mhew("MPhotonStatistics.fTimeLast-MPhotonStatistics.fTimeFirst - MRawRunHeader.GetFreqSampling/1000.MRawRunHeader.fNumSamplesHiGain - 2MPulseShape.GetPulseWidth");
360	mhew.SetName("EvtWidth");
361	mhew.SetTitle("Time between first and last photon hitting a detector");
362
363	MFillH fillh1(&mhn1, "", "FillCorsika");
364	MFillH fillh2(&mhn2, "", "FillH2");
365	MFillH fillh3(&mhn3, "", "FillH3");
366	MFillH filltp(&mhtp, "", "FillTriggerPos");
367	MFillH fillew(&mhew, "", "FillEvtWidth");
368	fillh1.SetNameTab("Corsika", "Distribution as simulated by Corsika");
369	fillh2.SetNameTab("Detectable", "Distribution of events hit the detector");
370	fillh3.SetNameTab("Triggered", "Distribution of triggered events");
371	filltp.SetNameTab("TrigPos", "TriggerPosition w.r.t the first photon");
372	fillew.SetNameTab("EvtWidth", "Time between first and last photon hitting a detector");
373
374	MHPhotonEvent planeG(1); // Get from MaxImpact
375	MHPhotonEvent plane0(2); // Get from MReflector
376	MHPhotonEvent plane1(2);
377	MHPhotonEvent plane2(2);
378	MHPhotonEvent plane3(2);
379	MHPhotonEvent plane4(2);
380	MHPhotonEvent planeF1(3); // Get from MGeomCam
381	MHPhotonEvent planeF2(header.IsPointRun()?4:3); // Get from MGeomCam
382
383	//MHPSF psf;
384
385	MFillH fillG(&planeG, "MPhotonEvent", "FillGround");
386	MFillH fill0(&plane0, "MirrorPlane0", "FillReflector");
387	//MFillH fill1(&plane1, "MirrorPlane1", "FillCamShadow");
388	MFillH fill2(&plane2, "MirrorPlane2", "FillCandidates");
389	MFillH fill3(&plane3, "MirrorPlane3", "FillReflected");
390	MFillH fill4(&plane4, "MirrorPlane4", "FillFocal");
391	MFillH fillF1(&planeF1, "MPhotonEvent", "FillCamera");
392	MFillH fillF2(&planeF2, "MPhotonEvent", "FillCones");
393	//MFillH fillP(&psf, "MPhotonEvent", "FillPSF");
394
395	fillG.SetNameTab("Ground", "Photon distribution at ground");
396	fill0.SetNameTab("Reflector", "Photon distribution at reflector plane w/o camera shadow");
397	//fill1.SetNameTab("CamShadow", "Photon distribution at reflector plane w/ camera shadow");
398	fill2.SetNameTab("Candidates", "'Can hit' photon distribution at reflector plane w/ camera shadow");
399	fill3.SetNameTab("Reflected", "Photon distribution after reflector projected to reflector plane");
400	fill4.SetNameTab("Focal", "Photon distribution at focal plane");
401	fillF1.SetNameTab("Camera", "Photon distribution which hit the detector");
402	fillF2.SetNameTab("Cones", "Photon distribution after cones");
403	//fillP.SetNameTab("PSF", "Photon distribution after cones for all mirrors");
404
405	// -------------------------------------------------------------------
406
407	// FIXME: Pedestal and Calibration runs should get P and C
408	const TString rule1(Form("s/cer([0-9]+)/%s\\/00$1_R_MonteCarlo.root/", Esc(fPathOut).Data()));
409	const TString rule2(Form("s/cer([0-9]+)/%s\\/00$1_I_MonteCarlo.root/", Esc(fPathOut).Data()));
410	const TString rule3(Form("s/cer([0-9]+)/%s\\/00$1_D_MonteCarlo.root/", Esc(fPathOut).Data()));
411
412	MWriteRootFile write3a( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
413	MWriteRootFile write3b( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
414	MWriteRootFile write2a( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
415	MWriteRootFile write2b( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
416	MWriteRootFile write1a( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
417	MWriteRootFile write1b( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
418
419	write1a.SetName("WriteRefData");
420	write1b.SetName("WriteRefMC");
421	write2a.SetName("WriteSigData");
422	write2b.SetName("WriteSigMC");
423	write3a.SetName("WriteCamData");
424	write3b.SetName("WriteCamMC");
425
426	write1a.AddContainer("MCorsikaEvtHeader", "Events", kFALSE);
427	write1a.AddContainer("MPhotonEvent", "Events");
428
429	write2a.AddContainer("MCorsikaRunHeader", "RunHeaders", kFALSE);
430	write2a.AddContainer("MRawRunHeader", "RunHeaders");
431	write2a.AddContainer("MGeomCam", "RunHeaders");
432	write2a.AddContainer("MSignalCam", "Events");
433	write2a.AddContainer("MRawEvtHeader", "Events", kFALSE);
434	write2a.AddContainer("MPedPhotFromExtractorRndm", "RunHeaders"); // FIXME: Needed for the signal files to be display in MARS
435	write2a.AddContainer("MMcRunHeader", "RunHeaders");
436	/* Monte Carlo Headers
437	write.AddContainer("MMcRunHeader", "RunHeaders", kFALSE);
438	write.AddContainer("MMcFadcHeader", "RunHeaders", kFALSE);
439	write.AddContainer("MMcTrigHeader", "RunHeaders", kFALSE);
440	write.AddContainer("MMcConfigRunHeader", "RunHeaders", kFALSE);
441	write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE);
442	// Monte Carlo
443	write.AddContainer("MMcEvt", "Events", kFALSE);
444	write.AddContainer("MMcTrig", "Events", kFALSE);
445	*/// Data tree
446	//write.AddContainer("MPedPhotFromExtractor", "Events");
447	//write.AddContainer("MPedPhotFromExtractorRndm", "Events");
448	//write.AddContainer("MTime", "Events", kFALSE);
449	//write.AddContainer("MRawEvtHeader", "Events");
450	//write.AddContainer("MTriggerPattern", "Events");
451
452	write3a.AddContainer("MRawEvtData", "Events");
453	write3a.AddContainer("MRawRunHeader", "RunHeaders");
454	write3a.AddContainer("MGeomCam", "RunHeaders");
455	write3a.AddContainer("MRawEvtHeader", "Events", kFALSE);
456	//write3.AddContainer("MPedestalCam", "RunHeaders", kFALSE);
457	write3a.AddContainer("MMcRunHeader", "RunHeaders");
458	write3a.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE);
459	write3a.AddContainer("ElectronicNoise", "RunHeaders", kFALSE);
460	write3a.AddContainer("MMcEvt", "Events", kFALSE);
461
462	write1b.AddContainer("MMcEvtBasic", "OriginalMC");
463	write2b.AddContainer("MMcEvtBasic", "OriginalMC");
464	write3b.AddContainer("MMcEvtBasic", "OriginalMC");
465
466	// -------------------------------------------------------------------
467
468	MGeomApply apply;
469
470	MSimPSF simpsf;
471
472	MSimGeomCam simgeom;
473	simgeom.SetNameGeomCam("GeomCones");
474
475	MSimCalibrationSignal simcal;
476	simcal.SetNameGeomCam("GeomCones");
477
478	// Dark Current: 4MHz = 0.004 GHz
479	// Light of night sky at La Palma: ~ 0.2 ph / cm^2 / sr / ns
480	// 5deg camera: 6e-3 sr
481	// NSB = 0.2*6e-3
482
483	MSimRandomPhotons simnsb;
484	// simnsb.SetFreq(0.005, 0.004); // 5MHz/cm^2, 4MHz
485	simnsb.SetFreq(0, 0.04); // 40MHz fixed for each APD
486	simnsb.SetNameGeomCam("GeomCones");
487
488	// FIXME: How do we handle star-light? We need the rate but we also
489	// need to process it through the mirror!
490
491	MSimAPD simapd;
492	simapd.SetFreq(0.04); // Must be identical to MSimRanodmPhotons!!
493	simapd.SetNameGeomCam("GeomCones");
494
495	MSimExcessNoise simexcnoise;
496	MSimBundlePhotons simsum;
497	MSimSignalCam simsignal;
498	MSimCamera simcam;
499	MSimTrigger simtrig;
500	MSimReadout simdaq;
501
502	MContinue conttrig("TriggerPos.fVal<0", "ContTrigger");
503
504	MParameterD pulpos("IntendedPulsePos");
505	// pulpos.SetVal(40); // [ns]
506	plist.AddToList(&pulpos);
507
508	MParameterD trigger("TriggerPos");
509	trigger.SetVal(0);
510	plist.AddToList(&trigger);
511
512	// -------------------------------------------------------------------
513
514	// FIXME: Remove isolated pixels
515	MImgCleanStd clean(7, 4.5);
516	clean.SetMethod(MImgCleanStd::kAbsolute);
517
518	//clean.SetNamePedPhotCam("MPedPhotFromExtractorRndm");
519
520	MHillasCalc hcalc;
521	hcalc.Disable(MHillasCalc::kCalcConc);
522
523	MHCamEvent evt0a(/10/0, "Signal", "Average signal;;S [ph]");
524	MHCamEvent evt0c(/10/0, "MaxSignal", "Maximum signal;;S [ph]");
525	MHCamEvent evt0d(/11/8, "ArrTm", "Time after first photon;;T [ns]");
526	evt0a.SetErrorSpread(kFALSE);
527	evt0c.SetCollectMax();
528
529	MFillH fillx0a(&evt0a, "MSignalCam", "FillAvgSignal");
530	MFillH fillx0c(&evt0c, "MSignalCam", "FillMaxSignal");
531	MFillH fillx0d(&evt0d, "MSignalCam", "FillArrTm");
532	MFillH fillx1("MHHillas", "MHillas", "FillHillas");
533	//MFillH fillx2("MHHillasExt", "", "FillHillasExt");
534	MFillH fillx3("MHHillasSrc", "MHillasSrc", "FillHillasSrc");
535	//MFillH fillx4("MHImagePar", "MImagePar", "FillImagePar");
536	//MFillH fillx5("MHNewImagePar", "MNewImagePar", "FillNewImagePar");
537
538	// -------------------------------------------------------------------
539
540	if (header.IsDataRun())
541	{
542	tasks.AddToList(&read);
543	tasks.AddToList(&pointing);
544	tasks.AddToList(&simmmcs);
545	if (!fPathOut.IsNull() && !HasNullOut())
546	{
547	tasks.AddToList(&write1b);
548	tasks.AddToList(&write2b);
549	if (fCamera)
550	tasks.AddToList(&write3b);
551	}
552	// if (header.IsPointRun())
553	// tasks.AddToList(&stars);
554	//tasks.AddToList(&print);
555	tasks.AddToList(&fillh1);
556	tasks.AddToList(&fillG);
557	if (!header.IsPointRun())
558	{
559	tasks.AddToList(&absapd);
560	tasks.AddToList(&absmir);
561	}
562	tasks.AddToList(&reflect);
563	if (!header.IsPointRun())
564	{
565	tasks.AddToList(&fill0);
566	//tasks.AddToList(&fill1);
567	tasks.AddToList(&fill2);
568	tasks.AddToList(&fill3);
569	tasks.AddToList(&fill4);
570	tasks.AddToList(&fillF1);
571	}
572	tasks.AddToList(&cones);
573	tasks.AddToList(&fillF2);
574	//if (header.IsPointRun())
575	// tasks.AddToList(&fillP);
576	tasks.AddToList(&cont1);
577	if (!header.IsPointRun())
578	tasks.AddToList(&fillh2);
579	}
580	// -------------------------------
581	tasks.AddToList(&apply);
582	if (header.IsDataRun())
583	{
584	tasks.AddToList(&simpsf);
585	tasks.AddToList(&simgeom);
586	tasks.AddToList(&cont2);
587	}
588	if (fCamera)
589	{
590	if (header.IsPedestalRun() \|\| header.IsCalibrationRun())
591	tasks.AddToList(&simcal);
592	tasks.AddToList(&simnsb);
593	tasks.AddToList(&simapd);
594	tasks.AddToList(&simexcnoise);
595	}
596	tasks.AddToList(&simsum);
597	if (fCamera)
598	{
599	tasks.AddToList(&simcam);
600	if (header.IsDataRun() \|\| fForceTrigger)
601	tasks.AddToList(&simtrig);
602	tasks.AddToList(&conttrig);
603	tasks.AddToList(&simdaq);
604	}
605	tasks.AddToList(&simsignal); // What do we do if signal<0?
606	if (!fPathOut.IsNull() && !HasNullOut())
607	{
608	tasks.AddToList(&write1a);
609	if (!header.IsPedestalRun())
610	tasks.AddToList(&write2a);
611	if (fCamera)
612	tasks.AddToList(&write3a);
613	}
614	// -------------------------------
615	if (fCamera)
616	{
617	// FIXME: MHCollectionArea Trigger Area!
618	if (header.IsDataRun())
619	tasks.AddToList(&fillh3);
620	tasks.AddToList(&filltp);
621	}
622	if (header.IsDataRun())
623	tasks.AddToList(&fillew);
624	if (!header.IsPedestalRun())
625	{
626	tasks.AddToList(&fillx0a);
627	tasks.AddToList(&fillx0c);
628	//tasks.AddToList(&clean);
629	tasks.AddToList(&hcalc);
630	tasks.AddToList(&fillx0d);
631	tasks.AddToList(&fillx1);
632	//tasks.AddToList(&fillx2);
633	tasks.AddToList(&fillx3);
634	//tasks.AddToList(&fillx4);
635	//tasks.AddToList(&fillx5);
636	}
637	//-------------------------------------------
638
639	tasks.SetAccelerator(MTask::kAccDontReset\|MTask::kAccDontTime);
640
641	// Create and setup the eventloop
642	MEvtLoop evtloop(fName);
643	evtloop.SetParList(&plist);
644	evtloop.SetDisplay(fDisplay);
645	evtloop.SetLogStream(&gLog);
646	if (!SetupEnv(evtloop))
647	return kFALSE;
648
649	// FIXME: If pedestal file given use the values from this file
650	//-------------------------------------------
651
652	if (binstr.IsDefault())
653	binstr.SetEdgesLin(150, -shape.GetPulseWidth(),
654	header.GetFreqSampling()/1000.*header.GetNumSamples()+shape.GetPulseWidth());
655
656	header.Print();
657
658	// FIXME: Display acceptance curves!
659
660	if (fDisplay)
661	{
662	TCanvas &c = fDisplay->AddTab("Info");
663	c.Divide(2,2);
664
665	c.cd(1);
666	gPad->SetBorderMode(0);
667	gPad->SetFrameBorderMode(0);
668	gPad->SetGridx();
669	gPad->SetGridy();
670	gROOT->SetSelectedPad(0);
671	shape.DrawClone()->SetBit(kCanDelete);
672
673	if (env0.GetCont() && (header.IsDataRun() \|\| header.IsPointRun()))
674	{
675	c.cd(3);
676	gPad->SetBorderMode(0);
677	gPad->SetFrameBorderMode(0);
678	gPad->SetGridx();
679	gPad->SetGridy();
680	gROOT->SetSelectedPad(0);
681	static_cast<MReflector*>(env0.GetCont())->DrawClone("line")->SetBit(kCanDelete);
682
683	}
684
685	if (fCamera)
686	{
687	if (env1.GetCont())
688	{
689	c.cd(2);
690	gPad->SetBorderMode(0);
691	gPad->SetFrameBorderMode(0);
692	gPad->SetGridx();
693	gPad->SetGridy();
694	gROOT->SetSelectedPad(0);
695	MHCamera c = new MHCamera(static_cast<MGeomCam&>(env1.GetCont()));
696	c->SetStats(kFALSE);
697	c->SetBit(MHCamera::kNoLegend);
698	c->SetBit(kCanDelete);
699	c->Draw();
700
701	}
702
703	if (env2.GetCont())
704	{
705	c.cd(4);
706	gPad->SetBorderMode(0);
707	gPad->SetFrameBorderMode(0);
708	gPad->SetGridx();
709	gPad->SetGridy();
710	gROOT->SetSelectedPad(0);
711	MHCamera c = new MHCamera(static_cast<MGeomCam&>(env2.GetCont()));
712	c->SetStats(kFALSE);
713	c->SetBit(MHCamera::kNoLegend);
714	c->SetBit(kCanDelete);
715	c->Draw();
716	}
717	}
718	}
719
720	//-------------------------------------------
721
722	// Execute first analysis
723	if (!evtloop.Eventloop(fMaxEvents))
724	{
725	gLog << err << GetDescriptor() << ": Failed." << endl;
726	return kFALSE;
727	}
728
729	//-------------------------------------------
730	// FIXME: Display Spline in tab
731	// FIXME: Display Reflector in tab
732	// FIXME: Display Routing(?) in tab
733	// FIXME: Display Camera(s) in tab
734	//-------------------------------------------
735
736	if (!WriteResult(plist))
737	return kFALSE;
738
739	*fLog << all << GetDescriptor() << ": Done." << endl << endl << endl;;
740
741	return kTRUE;
742	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: