| 1 | #/////////////////////////////////////////////////////////////////////////
|
|---|
| 2 | #
|
|---|
| 3 | # This file is compiled from two sections. One defines which transitions
|
|---|
| 4 | # are allowed to build a sequence (for example changing L1 Trigger
|
|---|
| 5 | # Tables between Calibration and Pedestal runs). The other section
|
|---|
| 6 | # defines a regular expression to define the allowed ordering
|
|---|
| 7 | # of the P-, C- and D-runs.
|
|---|
| 8 | #
|
|---|
| 9 | # The sections a introduced by [Transition] and [Regexp]. For further
|
|---|
| 10 | # details see below.
|
|---|
| 11 | #
|
|---|
| 12 | # If a section should be valid only for one telescope use:
|
|---|
| 13 | # [Transition] # Valid for all telescope numbers
|
|---|
| 14 | # [Transition 5] # Valid for telescope 5
|
|---|
| 15 | # [Transition: 5] # Valid for telescope 5
|
|---|
| 16 | # [Transition: 5 6] # Valid for telescopes 5 and 6
|
|---|
| 17 | #
|
|---|
| 18 | #
|
|---|
| 19 | # File-Id:
|
|---|
| 20 | # A file is uniquely identified by run-number and file-number.
|
|---|
| 21 | # If you give just a number it is identical to run-number with
|
|---|
| 22 | # file-number 0. To give a dedicated file-number you can use:
|
|---|
| 23 | # run.file
|
|---|
| 24 | #
|
|---|
| 25 | #/////////////////////////////////////////////////////////////////////////
|
|---|
| 26 |
|
|---|
| 27 | ##########################################################################
|
|---|
| 28 | #
|
|---|
| 29 | # Explanation [Transition]
|
|---|
| 30 | #
|
|---|
| 31 | # Rules to build blocks which will later be broken into sequences
|
|---|
| 32 | #
|
|---|
| 33 | # Syntax:
|
|---|
| 34 | #
|
|---|
| 35 | # [Transition]
|
|---|
| 36 | # rule1
|
|---|
| 37 | # rule2
|
|---|
| 38 | # rule3
|
|---|
| 39 | #
|
|---|
| 40 | #
|
|---|
| 41 | # Colums of rule:
|
|---|
| 42 | # 0 [1 2 3 4 [5 [6]]]
|
|---|
| 43 | #
|
|---|
| 44 | # 0: Table/Column to which the transition is applied
|
|---|
| 45 | # 1: Run type of previous run
|
|---|
| 46 | # 2: Run type of run to be accepted
|
|---|
| 47 | # 3: Key for previous run
|
|---|
| 48 | # 4: key for run to be accepted
|
|---|
| 49 | # 5: first file-id to apply this rule <default=0>
|
|---|
| 50 | # 6: last file-id to apply this rule <default=max>
|
|---|
| 51 | #
|
|---|
| 52 | # Run Types:
|
|---|
| 53 | # D 2
|
|---|
| 54 | # P 3
|
|---|
| 55 | # C 4
|
|---|
| 56 | #
|
|---|
| 57 | # The columns 1-4 can be expressed as regular expressions (ala TRegexp)
|
|---|
| 58 | # a ^ is prepended and a $ is appended automatically.
|
|---|
| 59 | #
|
|---|
| 60 | # A single "*" is an abbreviation for the regexp ".*" .
|
|---|
| 61 | #
|
|---|
| 62 | # As soon as any transition (column 0) is specified this transisiton
|
|---|
| 63 | # is checked not to change within a sequence.
|
|---|
| 64 | #
|
|---|
| 65 | # A "-" is an abbreviation for transitions "to be ignored". For example:
|
|---|
| 66 | # [Transition]
|
|---|
| 67 | # Test - 4 * 1200 1300
|
|---|
| 68 | # would mean:
|
|---|
| 69 | # ignore all keys (*) of column test for all current files
|
|---|
| 70 | # with run-type 4 if its file-id is between 1200.0 and 1300.0
|
|---|
| 71 | # The (former) third column in this case is obsolete.
|
|---|
| 72 | #
|
|---|
| 73 | # Each Transition which appears at least once is checked.
|
|---|
| 74 | #
|
|---|
| 75 |
|
|---|
| 76 | [Transition: 1]
|
|---|
| 77 |
|
|---|
| 78 | # Ignore project name for calibration files between 20100 and 45100
|
|---|
| 79 | Project - 4 * 20100 45100
|
|---|
| 80 | HvSettings - 2 * 86094 86094
|
|---|
| 81 | TriggerDelayTable
|
|---|
| 82 | ObservationMode
|
|---|
| 83 |
|
|---|
| 84 | # Transition setup for L1/2-TriggerTable of very old data
|
|---|
| 85 | L1TriggerTable 3 2 1 [235] 26206 35478
|
|---|
| 86 | L1TriggerTable 2 3 [235] 1 26206 35478
|
|---|
| 87 |
|
|---|
| 88 | L1TriggerTable - [^2] * 0 26830
|
|---|
| 89 | L2TriggerTable - [^2] * 0 26830
|
|---|
| 90 |
|
|---|
| 91 | L1TriggerTable 2 4 3 1 26816 39429
|
|---|
| 92 |
|
|---|
| 93 | L2TriggerTable 3 2 7 2 36049 38012
|
|---|
| 94 | L2TriggerTable 2 3 2 7 36053 38011
|
|---|
| 95 |
|
|---|
| 96 | L2TriggerTable 4 3 9 7 20170 37382
|
|---|
| 97 | L2TriggerTable 3 4 7 9 22712 37935
|
|---|
| 98 |
|
|---|
| 99 | L2TriggerTable 3 2 7 5 26207 35455
|
|---|
| 100 | L2TriggerTable 2 3 5 7 26207 35477
|
|---|
| 101 |
|
|---|
| 102 | L2TriggerTable 4 2 9 2 36157 37938
|
|---|
| 103 | L2TriggerTable 4 3 5 7 26207 35477
|
|---|
| 104 | L2TriggerTable 3 2 7 5 35460 36478
|
|---|
| 105 | L2TriggerTable 2 4 5 9 27170 31869
|
|---|
| 106 |
|
|---|
| 107 |
|
|---|
| 108 | # The Discriminator Thresholds do not influence the pedestal- and
|
|---|
| 109 | # calibration-trigger and need therefore not to be checked for these runs.
|
|---|
| 110 | # This allows all kind of transitions from P/C to P/C and from C to D.
|
|---|
| 111 | DiscriminatorThresholdTable [34] [34] * *
|
|---|
| 112 | DiscriminatorThresholdTable 4 2 * *
|
|---|
| 113 |
|
|---|
| 114 | # This defines which changes in the calibration script are allowed
|
|---|
| 115 | # P 177: CPedestals_500Hz
|
|---|
| 116 | # P 199: Pedestals_500Hz
|
|---|
| 117 | # C 180: 23Led_Blue
|
|---|
| 118 | # C 181: 10_Led_UV
|
|---|
| 119 | # C 182: 1Led_Green
|
|---|
| 120 | # C 183: 10Led_Blue
|
|---|
| 121 | # C 195: 1Led_Blue
|
|---|
| 122 | # C 207: 10Led_UV_PinDiode
|
|---|
| 123 | # D 179: 10Led_UV_50Hz
|
|---|
| 124 | # D 209: 10Led_UV_50Hz_PinDiode
|
|---|
| 125 | # D 238: 10Led_UV_50Hz_PinDiode. <--- has an additional dot
|
|---|
| 126 | # D 188: 10Led_UV_train50Hz
|
|---|
| 127 | # D 200: 10Led_UV_train50Hz_PinDiode
|
|---|
| 128 | # D 210: 10Led_Blue_50Hz
|
|---|
| 129 | # D 245: 10Led_UV_50Hz_Ped
|
|---|
| 130 |
|
|---|
| 131 | # Current DEFAULT setup. This what is used to build the
|
|---|
| 132 | # sequences from the newest data
|
|---|
| 133 | CalibrationScript 2 3 209 199 79266 200000
|
|---|
| 134 | CalibrationScript 3 4 199 207 50640
|
|---|
| 135 | CalibrationScript 4 2 207 209 91301
|
|---|
| 136 | CalibrationScript 4 3 207 199 53875 200000
|
|---|
| 137 | CalibrationScript 4 2 207 245 200000
|
|---|
| 138 |
|
|---|
| 139 | # Previous defaults. This are cases which are widely used
|
|---|
| 140 | # through our data and can thus be considered old defaults
|
|---|
| 141 | CalibrationScript 4 2 181 179 46305 50600
|
|---|
| 142 | CalibrationScript 4 2 207 209 50641 84570
|
|---|
| 143 | CalibrationScript 4 2 207 179 50879 91252
|
|---|
| 144 | CalibrationScript 2 3 179 199 46313 91423
|
|---|
| 145 | CalibrationScript 2 3 209 199 50784 79256
|
|---|
| 146 | CalibrationScript 3 2 199 179 46313 90220
|
|---|
| 147 |
|
|---|
| 148 | CalibrationScript 3 2 199 209 50785 57781
|
|---|
| 149 | CalibrationScript 3 4 199 181 45730 50805
|
|---|
| 150 |
|
|---|
| 151 | # This was used only in some rare cases (still to be checked!)
|
|---|
| 152 | # This are cases used through a big part of our data
|
|---|
| 153 | # but take place only in some single cases.
|
|---|
| 154 | CalibrationScript 4 3 181 199 46405 50137
|
|---|
| 155 | CalibrationScript 3 4 199 181 67116 68714
|
|---|
| 156 | CalibrationScript 2 4 179 207 87824 87842
|
|---|
| 157 |
|
|---|
| 158 | # Single calibration runs inbetween data. Should be
|
|---|
| 159 | # excluded differently, because these blocks will not
|
|---|
| 160 | # give valid sequences anyhow
|
|---|
| 161 | CalibrationScript 2 4 179 207 68731 68731
|
|---|
| 162 | CalibrationScript 2 4 179 207 61374 61459
|
|---|
| 163 | CalibrationScript 2 4 179 207 53901 53901
|
|---|
| 164 | CalibrationScript 2 4 179 207 51153 51170
|
|---|
| 165 | CalibrationScript 2 4 188 181 50084 50084
|
|---|
| 166 | CalibrationScript 2 4 209 207 96951 96951
|
|---|
| 167 |
|
|---|
| 168 | # For some reasons here are two consecutive calibration
|
|---|
| 169 | # runs with two different colors (still to be checked!)
|
|---|
| 170 | CalibrationScript 4 4 181 183 51173 51173
|
|---|
| 171 |
|
|---|
| 172 | # Special setup for more than one C-Run. Old data had several
|
|---|
| 173 | # calibration runs with different taken sequentually
|
|---|
| 174 | CalibrationScript 4 4 (181|195) (182|183|193|195) 44834 45579
|
|---|
| 175 |
|
|---|
| 176 | # This was a typo 238 is basically the same as 209
|
|---|
| 177 | CalibrationScript 4 2 207 238 78696 78696
|
|---|
| 178 |
|
|---|
| 179 | # This is for runs with special calibration scripts (177,188,200,210)
|
|---|
| 180 | CalibrationScript 2 3 (179|188|200) (177|199) 44831 46223
|
|---|
| 181 | CalibrationScript 3 2 (177|199) (179|188|200) 44831 46223
|
|---|
| 182 | CalibrationScript 4 2 (181|182|195) (188|200) 44831 46223
|
|---|
| 183 | CalibrationScript 3 4 177 (181|195) 44831 45718
|
|---|
| 184 | CalibrationScript 4 3 181 177 44831 45717
|
|---|
| 185 | CalibrationScript 4 2 181 188 50083 50273
|
|---|
| 186 | CalibrationScript 3 2 199 188 50083 50273
|
|---|
| 187 | CalibrationScript 2 3 188 199 50083 50273
|
|---|
| 188 | CalibrationScript 4 2 207 210 50687 50746
|
|---|
| 189 | CalibrationScript 2 3 210 199 50687 50746
|
|---|
| 190 | CalibrationScript 3 2 199 210 50687 50746
|
|---|
| 191 |
|
|---|
| 192 | # Special rules for calibration script 183
|
|---|
| 193 | CalibrationScript 2 4 209 183 50642 50642
|
|---|
| 194 | CalibrationScript 4 3 183 199 51193 51193
|
|---|
| 195 | CalibrationScript 2 4 179 183 51192 51192
|
|---|
| 196 | CalibrationScript 4 2 183 179 51174 51174
|
|---|
| 197 |
|
|---|
| 198 | #########################################################################
|
|---|
| 199 | #
|
|---|
| 200 | # Explanation [Regexp]
|
|---|
| 201 | #
|
|---|
| 202 | # To build sequences a string with the run-types is evaluated.
|
|---|
| 203 | # A capital case D or P means: The nearest C-Run is the last C-Run
|
|---|
| 204 | # A lower case d or p means: The nearest C-Run is the next C-Run
|
|---|
| 205 | #
|
|---|
| 206 | # The first expression is evaluated first. The last one last.
|
|---|
| 207 | # If one regexp matches the others are not evaluated anymore and
|
|---|
| 208 | # the sequence is build from the match.
|
|---|
| 209 | #
|
|---|
| 210 | # For details on regular expressions check
|
|---|
| 211 | # http://perldoc.perl.org/perlre.html
|
|---|
| 212 | #
|
|---|
| 213 | # The syntax is
|
|---|
| 214 | # [Regexp]
|
|---|
| 215 | # regexp [firstrun [lastrun]]
|
|---|
| 216 | #
|
|---|
| 217 | [Regexp: 1]
|
|---|
| 218 |
|
|---|
| 219 | # Allow almost everything but require at least one run of each run-type
|
|---|
| 220 | [dp]*C+[PD]*(PD|DP)[DP]* 0 32734
|
|---|
| 221 | [dp]*dp*C+[PD]*P[DP]* 0 32734
|
|---|
| 222 | [dp]*p[dp]*C+P*D[PD]* 0 32734
|
|---|
| 223 | [dp]*(dp|pd)[dp]*C+[PD]* 0 32734
|
|---|
| 224 |
|
|---|
| 225 | # This is the "allow as much as possible" solution
|
|---|
| 226 | [dp]*(pC+|C+P)[PD]*D 32735 45624
|
|---|
| 227 | d[dp]*(pC+|C+P)[PD]* 32735 45624
|
|---|
| 228 |
|
|---|
| 229 | # Allow intermediate calibration and pedestal runs:
|
|---|
| 230 | # Since now we have interleaved calibration events.
|
|---|
| 231 | [dD]*[pP]C+((([pP]|C)+[dD])|[dD])+ 45625 46477
|
|---|
| 232 |
|
|---|
| 233 | # Allow intermediate pedestal runs
|
|---|
| 234 | #[dD]*[pP]C+(([pP]+[dD])|[dD])+ 46478 53943
|
|---|
| 235 | [dD]*[pP]C+[pPdD]*[dD] 46478 53943
|
|---|
| 236 | [dD]*[pP]C+[pPdD]*[dD] 56567 57786
|
|---|
| 237 | [dD]*[pP]C+[pPdD]*[dD] 60145 60396
|
|---|
| 238 |
|
|---|
| 239 | # Use the minimum solution for newest date
|
|---|
| 240 | # Do not allow intermediate non-data runs
|
|---|
| 241 | [dD]*[pP]C+[dD]+ 53944
|
|---|
