source: trunk/MagicSoft/Simulation/Detector/Camera/input.card@ 9492

Last change on this file since 9492 was 6714, checked in by moralejo, 20 years ago
*** empty log message ***
File size: 2.7 KB
Line 
1camera 0.7
2# Number of telescopes:
3ct_num 1
4# Telescope geometry type:
5ct_geom 1
6# Quantum efficiency file:
7qe_file 0 /home/magic/MagicSoft/Simulation/Detector/Data/qe-emi-coat.RFL.dat
8# Input file (one per telescope):
9# input_file 0 /data1/magic/reflex/Gamma_zbin0_0_7_1000to1009_w0.rfl
10# Perform calibration run: lambda sigma_lambda phot_per_pixel time_fwhm n_events [selected_pixel]
11# The values below correspond roughly to 10 LED UV
12#calibration_run 375. 12. 120. 2.5 5000
13calibration_run 375. 12. 200. 0.01 1
14# line below shows how to create a pedestal run (= cal. with 0-photon pulses):
15#calibration_run 0. 0. 0. 0. 1000
16# Ascii output file name:
17#data_file ./Gamma_zbin0_0_7_1000to1009_w0.dat
18data_file ./prueba.dat
19# root output file name:
20#root_file ./Gamma_zbin0_0_7_1000to1009_w0.root
21#root_file ./19990101_00001_P_MonteCarlo_E.root
22root_file ./19990101_00002_C_MonteCarlo_E.root
23# Trigger characteristics: gate length (ns), min. overlapping time (ns),
24# amplitude and FWHM of (gaussian) single phe response for trigger:
25trigger_prop 3.0 0.25 1.0 2.0
26# L1 Trigger condition: CT number, threshold (mV), multiplicity and topology:
27trigger_single 0 4 4 2
28# To shift the pulses in the FADC window, modify the trigger delay (ns):
29#trigger_delay 18.
30# Correction to overall light collection efficiency: CT# fraction
31mirror_fraction 0 0.73
32# Switch on NSB:
33#nsb_on
34nsb_off
35# Number of photons from the diffuse NSB (nphe / ns 0.1*0.1 deg^2 239 m^2) and
36# minimum number of phe from shower required to simulate NSB:
37nsb_mean 0.183 10
38# Starfield (see Starfieldadder program)
39# starfield_file /home/magic/MagicSoft/Simulation/Detector/Starfield/starfield.rfl
40# Electronic noise in FADC (sigma in ADC counts): Inner pixels, outer pixels, digital noise:
41#fadc_noise 1.3 2.4 1.
42elec_noise_off
43# Mean pedestal per slice (ADC counts):
44fadc_pedestal 10.
45# Additional sigma of mirror spot (cm):
46sigma_xy_cm_spot 1.4
47# Seeds for random number generation:
48seeds 66767 45069
49# Directory where NSB database can be found for inner and outer pixels:
50nsb_directory /home/magic/MagicSoft/Simulation/Detector/StarLight/inner/
51nsb_dir_outer /home/magic/MagicSoft/Simulation/Detector/StarLight/outer/
52#
53# FADC properties: shape of single phe response (1 means realistic one, from
54# Pulpo setup), integral in FADC counts for 1 phe. (3rd argument is ignored
55# unless gaussian shape - 1st argument=0 - was chosen) :
56fadc_prop 1 7.8 5.0
57# Same as above for outer pixels:
58fadc_outer 1 3.2 5.0
59#
60# tentative values for future fast (2 GHz) FADC:
61#
62#fadc_prop 0 40. 3.
63#fadc_outer 0 15. 3.
64# FADC sampling frequency and number of FADC slices:
65#fadc_GHz 2. 100
66#
67# Write to output trigger information:
68write_McTrig
69# Write to output FADC information:
70write_McFadc
71end_file
Note: See TracBrowser for help on using the repository browser.