source: trunk/MagicSoft/Simulation/Detector/include-MTrigger/MTrigger.hxx@ 469

Last change on this file since 469 was 459, checked in by harald, 24 years ago
For the development of the StarResponse program, some smaller changes in the class MTrigger are neccessary. Be carefull, perhaps a change in the destructor of MTrigger can effect other programs. Be aware of that!!
File size: 6.4 KB
Line 
1#ifndef __MTrigger__
2#define __MTrigger__
3
4#define CASE_SHOW 0
5#define CASE_NSB 1
6#define CASE_STAR 2
7
8// class MTrigger
9//
10// implemented by Harald Kornmayer
11//
12// This is a class to simulate the trigger.
13// It assumes a special response of the PMT for one single Photo-electron.
14//
15//
16//
17#include <iostream.h>
18#include <math.h>
19
20#include "TROOT.h"
21#include "TObject.h"
22#include "TRandom.h"
23#include "TH1.h"
24
25#include "Mdefine.h"
26#include "MMcEvt.h"
27
28#include "MTriggerDefine.h"
29
30
31//==========
32// MTrigger
33//
34// The simulation of the Trigger for MonteCarlo Events is using this
35// class. So all methods concerning the trigger should be done inside this
36// class.
37//
38// For a better understanding of the behavior of the trigger is here small
39// abstract of the trigger. This may change in the future.
40//
41//
42// We now from the camera program (This is the surrounding of the class
43// MTrigger.) that one photo electron leaves at time t the photo cathode
44// of the pixel number iPix).
45//
46// At the end of the PMT, the preamp, the optical fiber transmission we
47// get a signal of a given shape. After some discussion with Eckart the
48// standard response function looks like this :
49//
50// It is a gaussian Signal with a given FWHM.
51//
52// So whenever a photo electron leaves the photo cathod, on has to add
53// the standard response function to the analog signal of the pixel.
54//
55// Each pixel of the camera has such an summed-up analog signal. It may
56// look like this picture:
57//
58//
59// This is the input of the discriminator for the pixels. The output of
60// the discriminator is a digital signal. The response of the diskriminator
61// is not fixed at the moment. There are discussion about this topic.
62//
63// At the moment the response is very simple. Whenever the analog signal
64// is crossing a defined threshold from below to above, a digital signal
65// with a given length is created.
66//
67// No one can start with the simulation of different trigger levels.
68//
69// The TriggerLevelZero is a very easy one. It is just looking if there
70// are more then N digital signals at level ON (=1). If this is the case,
71// a TriggerLevelZero signal is created.
72//
73// The TriggerLevelOne is not implemented now. This will be a kind of next
74// neighbour condition (i.e. four neigbouring analog signals at the same
75// time, but this requests at least four digital signals at level ON, what
76// is equivalent with a TriggerLevelZero.
77//
78//
79class MTrigger {
80
81 private:
82 //
83 // then for all pixels the shape of all the analog signals
84 //
85 Bool_t used [TRIGGER_PIXELS] ; // a boolean to indicated if the pixels is used in this event
86 Int_t nphotshow[TRIGGER_PIXELS]; // count the photo electrons per pixel coming from showers
87 Int_t nphotnsb[TRIGGER_PIXELS]; // count the photo electrons per pixel coming from NSB
88 Int_t nphotstar[TRIGGER_PIXELS]; // count the photo electrons per pixel coming from stars
89
90 Float_t *a_sig[TRIGGER_PIXELS] ; // the analog signal for pixels
91
92 Float_t baseline[TRIGGER_PIXELS] ; // for the baseline shift
93
94 //
95 // then for all pixels the shape of the digital signal
96 //
97 Bool_t dknt [TRIGGER_PIXELS] ; // a boolean to indicated if the pixels has passed the diskrminator
98 Float_t *d_sig[TRIGGER_PIXELS] ; // the digital signal for all pixels
99
100 //
101 // and the sum of all digital signals
102 //
103 Float_t sum_d_sig[TRIGGER_TIME_SLICES] ;
104
105 //
106 // first the data for the response function
107 //
108 Float_t fwhm_resp ; // fwhm of the phe_response function
109 Float_t ampl_resp ; // amplitude of the phe_response function (in mV)
110 Float_t sing_resp[ RESPONSE_SLICES ] ; // the shape of the phe_response function
111 Float_t peak_time ; // the time from the start of the response function to the maximum peak
112
113 TH1F *histPmt ;
114 Float_t histMean ; // Mean value of the distribution of Rasmik (stored in histPmt)
115 TRandom *GenElec ; // RandomGenerator for the Electronic Noise
116
117 //
118 // some values for the trigger settings
119 //
120
121 Float_t chan_thres[TRIGGER_PIXELS] ; // the threshold (in mV) for each individuel pixels
122 Float_t gate_leng ; // the length of the digital signal if analog signal is above threshold
123
124 Float_t trigger_multi ; // Number of Pixels requested for a Trigger
125 Int_t trigger_geometry ; // 0 means a pixel with trigger_multi-1 neighbours
126 // 1 means trigger_multi neighbours
127 // 2 means trigger_multi closed neighbours
128 //
129 // The lookup table for the next neighbours
130 //
131
132 Int_t NN[TRIGGER_PIXELS][6] ;
133
134 //
135 // some information about the different TriggerLevels in each Event
136 //
137
138 Int_t nZero ; // how many ZeroLevel Trigger in one Event
139 Bool_t SlicesZero[TRIGGER_TIME_SLICES] ; // Times Slices at which the ZeroLevel Triggers occur
140
141 Int_t nFirst ; // how many FirstLevel Trigger in one Event
142 Int_t SlicesFirst[5] ; // Times Slices at which the FirstLevel Triggers occur
143 Int_t PixelsFirst[5] ; // Pixel which fires the trigger
144
145 Int_t nSecond ; // how many SecondLevel Trigger in one Event
146 Int_t SlicesSecond[5] ; // Times Slices at which the SecondLevel Triggers occur
147 Int_t PixelsSecond[5] ; // Pixel which fires the trigger
148
149private:
150
151 Float_t Fill( Int_t, Float_t, Int_t ) ;
152
153 Bool_t PassNextNeighbour( Bool_t m[], Bool_t *n) ;
154
155public:
156
157 MTrigger() ;
158
159 MTrigger(float gate, float ampl, float fwhm) ;
160
161 ~MTrigger() ;
162
163 void Reset() ;
164
165 void ClearZero() ;
166
167 void ClearFirst() ;
168
169 Float_t FillShow( Int_t, Float_t ) ;
170
171 Float_t FillNSB( Int_t, Float_t ) ;
172
173 Float_t FillStar( Int_t, Float_t ) ;
174
175 void ElecNoise() ;
176
177 void SetResponseShape();
178
179 void SetMultiplicity (Int_t multi);
180
181 void SetTopology (Int_t topo);
182
183 void SetThreshold (Float_t thres[]);
184
185 void ReadThreshold (char name[]);
186
187 void ReadParam(char name[]);
188
189 Float_t GetMultiplicity (){
190 return(trigger_multi);
191 }
192
193 Int_t GetTopology (){
194 return(trigger_geometry);
195 }
196
197 Float_t GetThreshold (Int_t il){
198 return(chan_thres[il]);
199 }
200
201 void GetResponse( Float_t * resp) ;
202
203 void Diskriminate() ;
204
205 void ShowSignal (MMcEvt *McEvt) ;
206
207 Int_t ZeroLevel() ;
208
209 Int_t FirstLevel() ;
210
211 Float_t GetFirstLevelTime( Int_t il ) ;
212
213 Int_t GetFirstLevelPixel( Int_t il ) ;
214
215 Float_t GetAmplitude() {
216 return ampl_resp ;
217 }
218
219 Float_t GetFwhm() {
220 return fwhm_resp ;
221 }
222
223} ;
224
225#endif
226
Note: See TracBrowser for help on using the repository browser.