source: trunk/Mars/Changelog.09@ 17567

                                                 -*-*- END OF LINE -*-*-

 2009/12/23 Thomas Bretz

   * macros/dohtml.C:
     - added missing paths



 2009/12/23 Thomas Bretz

   * Release 2.4



 2009/12/23 Thomas Bretz

   * mbase/MStatusArray.[h,cc]:
     - implemented a special treatment for TGraphs in RecursiveRemove 
       to make sure that the fHistogram pointer doesn't get deleted
       twice.
     - implemented a small fix to make sure an object which is more than
       once in a list of primitives gets really removed.

   * resources/calibration_spline.rc:
     - updated calibration constants of period 62, 63, 72-75
     - added more dummy constants



 2009/12/21 Thomas Bretz

   * mjobs/MJCalibration.cc:
     - allow unprescaled Calibration instead of requiring it (needed
       for MCs)
     - changed the default for "no pattern" so that events with file
       format <5 are correctly treated. This might result in a small 
       bias in the case newer files miss the calibration pattern, but
       that's unavoidable

   * mtrigger/MTriggerPatternDecode.cc:
     - decode trigger pattern for files older than format version 5
       according to the file type

   * resources/calibration_spline.rc:
     - added dummy periods up to 89

   * mmc/MMcFadcHeader.hxx:
     - changed version to 10 (got a warning for newer MCs)



 2009/12/16 Stefan Ruegamer

   * datacenter/scripts/read_lapalma-tapes
     - important output is now also written to shell



 2009/12/11
  
   * mfileio/FileIOLinkDef.h, mfileio/Makefile:
     - removed MReadRflFile



 2009/12/10 Thomas Bretz

   * ceres.rc:
     - added line for new option

   * mhflux/MAlphaFitter.cc:
     - added "Sensitivity" to output
     - prevent zero or negative divisor

   * msim/MSimMMCS.h:
     - removed pointers from i/o

   * msimcamera/MSimCamera.h:
     - fixed a typo in a comment

   * msimcamera/MSimRandomPhotons.[h,cc]:
     - changed to allow simulation of a nsb spectrum

   * mjobs/MJSimulation.cc:
     - added cone transmission
     - plotted cone transmission

   * resmc/night-sky-la-palma.txt
     - added



 2009/12/01 Thomas Bretz

   * mastro/MObservatory.cc:
     - set fObservatoryKey when a new location is set.
       Be careful, it is not overwritten if a location is set
       manually (long, lat)

   * mcorsika/MCorsikaEvtHeader.cc:
     - initialize fX and fY with 0



 2009/10/26 Thomas Bretz

   * Makefile:
     - moved definition of OSTYPE to Makefile.conf.general
     - removed mreflector 

   * Makefile.conf.general:
     - added definition of OSTYPE

   * callisto.cc:
     - added option for test mode

   * ceres.rc:
     - fixed a typo 
     - added a line for the cone transmission

   * condor/program.submit:
     - Out shell be Output 
     - Log is now set automatically by condor

   * mastro/MAstroCatalog.cc:
     - added a trailing / to the default path

   * mbase/MAGIC.cc:
     - added a warning when using root versions which contain a projection
        bug which doesn't allow to reuse plotted histograms as expected

   * mbase/MEnv.h:
     - added a default to GetValue

   * mbase/MLut.cc:
     - added a validity check for the line data

   * mbase/MParSpline.[h,cc]:
     - added RecursiveRemove 
     - added destructor

   * mbase/MSpline3.[h,cc]:
     - renamed overloaded Integral to avoid confusions in the interpreter

   * mcalib/MCalibrationChargeCalc.cc:
     - tiny cosmetics (a/=b instead of a=a/b)

   * mcorsika/MCorsikaRead.h, mdata/MDataMember.h,
     mhbase/MFillH.h, msim/MSimMMCS.h:
     - excluded pointers from I/O, this causes some (the last) event 
       to be stored, which could be quite large

   * mfilter/MFSoftwareTrigger.cc:
     - added some informal output to the log-stream

   * mhbase/MH3.cc:
     - added a sanity if when deleting fHist

   * mhbase/MHn.[h,cc]:
     - added RecursiveRemove

   * mhist/MHCamEvent.cc:
     - check for fSum in RecursiveRemove

   * mjobs/MJCalibration.cc:
     - write commandline to output

   * mpointing/MPointingDevCalc.cc:
     - added new pointing informations

   * msimcamera/MSimAPD.cc:
     - added the 3600 cell APD type

   * msimcamera/MSimBundlePhotons.cc:
     - improved a comment

   * msimcamera/MSimExcessNoise.[h,cc]:
     - changed size of excess noise to be variable

   * msimcamera/MSimTrigger.cc:
     - print some information if electronics is "switched off"

   * msimreflector/MReflector.cc:
     - improved a comment

   * mbase/MStatusArray.[h,cc]:
     - tried to improved stability by a completely self made deletion
       scheme for the canvases

   * mgeom/MGeomPix.h:
     - replaced tan(60)/2 by sin(60)

   * mjobs/MJCalibrateSignal.[h,cc]:
     - added test mode to allow calibration of calibration files

   * Makefile, */Makefile:
     - brought includes in the correct order

   * msimcamera/MSimRandomPhotons.cc:
     - added the Cone transmission
     - added a lot of comments



 2009/09/11 Daniela Dorner

   * datacenter/db/include.php:
     - implemented Select-all functionality for builddatasets.php
     - improved function for 'Next/Prev/First/Last' links: regexp 
       instead of selfmade building of link
     - added removing of fNumStart from link in function GetClearedURL()
     - added removing of DisplaySelected=inverse from link in function 
       GetClearedURL()
     - implemented 'Display Not-Selected Sequences' Button
     - changed text on buttons

   * datacenter/db/builddatasets.php:
     - added possibility to update data set in database: update queries,
       interface to select data set, check if user is the same
     - bugfix: changed some $_SESSION back to $_GET (selection in the 
       menu were treated wrongly)
     - commented resetting of 'name' and 'comment' out
     - implemented 'Display Not-Selected Sequences' Button
     - changed text on buttons
     - changed column 'Links' to the same like in sequinfo-aio.php
     - implemented possibility to choose data set number for data set
       file 

   * datacenter/db/menu.js:
     - implemented function for Select-all functionality



 2009/09/08 Daniela Dorner

   * datacenter/db/include.php:
     - exchanged ON/Off checkboxes with ON/Off/Not radio-buttons for 
       builddatasets.php
     - bugfix for display of total number of displayed results
     - added button for displaying all not-selected sequences (also for
       builddatasets.php)

   * datacenter/db/builddatasets.php:
     - adapted to usage of radio buttons
     - adapted to usage of 'Display Not-Selected Sequences' button
     - improvement of WARN and ERROR messages
     - bugfix for observation mode display in data set summary
     - added remark that pressing 'Get Data Set' button is neccessary



 2009/08/31 Daniela Dorner

   * datacenter/scripts/setup:
     - removed 

   * datacenter/scripts/sourcefile:
     - small fix in function makedir()

   * datacenter/scripts/fillmcdb:
     - added (script to add run in mc db (cta))

   * datacenter/scripts/runsimtel:
     - added (script to run corsika and simtelarray for cta)

   * datacenter/scripts/runchimp:
     - added (script to run coverter from simtel to mars format for cta)

   * datacenter/scripts/runctastar:
     - added (script to run star (macro) for cta)

   * datacenter/scripts/runstereo:
     - added (script to macro to calculate stereo parameters for cta)



 2009/08/21 Daniela Dorner

   * datacenter/db/menu.php:
     - added functions needed for mcinfo.php

   * datacenter/db/menu.php, datacenter/db/magicdefs.php:
     - added limit for cloudiness

   * datacenter/db/sequinfo-aio.php:
     - removed $_GET from some functions

   * datacenter/db/db.php, datacenter/db/datasetinfo.php, 
     datacenter/db/dbstatus.php, datacenter/db/findoffdata.php, 
     datacenter/db/index.html, datacenter/db/index.php, 
     datacenter/db/querycal.php, datacenter/db/queryseq.php, 
     datacenter/db/querystar.php, datacenter/db/runinfo.php, 
     datacenter/db/sequinfo.php, datacenter/db/statusrps.php, 
     datacenter/db/statussps.php:
     - removed 



 2009/08/20 Daniela Dorner

   * datacenter/db/include.php:
     - implemented 'First' and 'Last' links for the table, moved 
       creation of link into function ReplaceInUri()
     - added display of total number of results (without LIMIT) at end 
       of table
     - changed CheckBox2() to use SESSION variables
     - added new buttons for builddatasets.php in PrintMagicTable() 
       (above and below the table in case form with POST is used), 
       function PrintDisplaySequencesButtons()
     - added function GetClearedURL() to ensure that variables for 
       insert, display of selected sequences and download of files, are
       removed in the case POST and not GET is used (needed only for
       additional buttons in builddatasets.php)
     - removed $_GET from some functions

   * datacenter/db/menu.php:
     - removed $_GET from Init functions
     - moved init-function of builddatasets.php here: 
       InitBuildDataSets()
     - adapted init of builddatasets
     - added init of fOnlySum
     - fixed typo in init of fProposalName
     - changed input of Star-Done Range from 10 to 19 digits

   * datacenter/db/ctamcinfo.php, datacenter/db/magicdefs.php, 
     datacenter/db/mcdefs.php, datacenter/db/ctadefs.php:
     - removed $_GET from some functions

   * datacenter/db/builddatasets.php:
     - changed from $_GET and $_POST to $_SESSION to avoid interaction
       problems between GET and POST
     - provide possibility to select sequences from several pages 
       (Next/SortBy/...)
     - new buttons: 'Display Selected/All Sequences', 'Get Dataset File'
     - bugfix in download of txt-File
     - removed $_GET from some functions
     - added user management
     - updated and enhanced lower part (information about data set)

   * datacenter/db/builddatasets.php, datacenter/db/ctamcinfo.php, 
     datacenter/db/datacheck.php, datacenter/db/datasetinfo.php,
     datacenter/db/datasetinfo-aio.php, datacenter/db/dbstatus.php,
     datacenter/db/findoffdata.php, datacenter/db/index.php,
     datacenter/db/mcinfo.php, datacenter/db/opticaldata.php,
     datacenter/db/printtable.php, datacenter/db/querycal.php,
     datacenter/db/querymc.php, datacenter/db/queryrbk.php,
     datacenter/db/queryseq.php, datacenter/db/querystar.php,
     datacenter/db/runinfo.php, datacenter/db/runinfo-aio.php,
     datacenter/db/sequinfo.php, datacenter/db/sequinfo-aio.php,
     datacenter/db/sources.php, datacenter/db/statusrps.php,
     datacenter/db/statussbs.php, datacenter/db/statussps.php:
     - changes needed for 'Last' link and display of total number of 
       results



 2009/08/18 Thomas Bretz

   * Makefile:
     - replaced $OSTYPE by a call to "uname -s" converted to lower
       case for compatibility

   * mjobs/MJob.cc:
     - output the name of the resource file in SetupEnv for convinience

   * mjobs/MJCut.cc:
     - write command line to output

   * mbase/MEvtLoop.cc:
     - improved some output



 2009/08/14 Daniela Dorner

   * datacenter/scripts/sourcefile:
     - function getstatus: return 0, if variable $numprocs is empty
     - moved call of getdbinfo() to function getstepinfo where possible
     - enhanced function getstepinfo: implemented retrieving variable
       NodeRestricted from steps.rc
       In steps.rc a line 'Table.Column.NodeRestricted: yes' has to be
       added when a step has to be executed on a certain node (stored 
       in the database in MCRunProcessStatus.fProductionHostKEY)

   * datacenter/scripts/jobmanager:
     - implemented possibility to send certain jobs to certain nodes
       of the cluster (currently implemented only for sun grid engine)
     - fix for greping the scriptname from the qstat output (needed
       for scripts with commandline option)
     - bugfix: pass environment variable AUTOMATIONSETUP to sun grid
       engine
     - pass environment variable AUTOMATIONSETUP also in the case of 
       condor (macro $automationsetup)

   * datacenter/scripts/setup.isdc.cta:
     - added analysis scripts for jobmanager
     - added variables concerning the cluster: number of nodes and 
       excluded nodes (needed in the jobmanager for the changes 
       above)

   * datacenter/scripts/run.condor:
     - added definition of environment variable using macro 
       $automationsetup



 2009/08/14 Daniel Hoehne-Moench

   * datacenter/scripts/mcsequences:
     - included display of azimuth range in sequence file
     - changed sequencing to one sequence per mc run



 2009/08/13 Thomas Bretz

   * mbase/Margs.cc:
     - fixed a problem returning 0 instead of "" for TString

   * mbase/MLut.h, mbase/MStatusArray.h:
     - added new overloads for Print to make it compile with newer root
       versions without warning

   * msimreflector/MReflector.cc:
     - replaced ForEach to make it compile with newer root versions

   * mtrigger/MTriggerPatternDecode.cc:
     - removed some accidental debug output



 2009/08/13 Daniela Dorner

   * datacenter/scripts/setup.isdc.cta, 
     datacenter/scripts/setup.wue.magic.data, 
     datacenter/scripts/setup.wue.magic.mc:
     - added (setup files with different default settings for usage with
       $AUTOMATIONSETUP)

   * datacenter/scripts/sourcefile:
     - moved variables for resourcefiles steps.rc and sql.rc to setup.*
     - removed function cont()
     - added check if setup.* is existing

   * datacenter/scripts/jobmanager:
     - removed command line options (done now via environment variable
       $AUTOMATIONSETUP)
     - moved arrays $scripts, $scriptscolname, $pnosweek, $pnoswe to
       setup.*



 2009/08/12 Daniela Dorner

   * datacenter/scripts/jobmanager:
     - improved logging (new layout and more information)
     - moved sleep to end of loop (function nextscript())



 2009/08/12 Daniel Hoehne-Moench
   * datacenter/macros/filldotrun.C:
     - inserted Arehucas versions 090625-0, 0907[02,06,31]-0 including
       the new columns L3TriggerRate, L3TriggerTable, WheelPos1,
       WheelPos2, Cycle, PI, WorkingGroup and Proposal
     - implemented MAGIC 2 run file handling
     - removed readout of columns by ReadToDelim(); now the columns are
       filled into an TObjArray



 2009/08/11 Daniela Dorner

   * datacenter/db/menu.php:
     - added mc function (corsika production)

   * datacenter/db/magicdefs.php:
     - added $timelimits array

   * datacenter/db/include.php:
     - added usage of $timelimits array in function StatusQuery(), i.e.
       provides possibility to set different values for time after 
       which job is marked as 'crashef' for diffent steps

   * datacenter/db/builddatasets.php, datacenter/db/datacheck.php, 
     datacenter/db/datasetinfo-aio.php, datacenter/db/datasetinfo.php, 
     datacenter/db/dbstatus.php, datacenter/db/findoffdata.php, 
     datacenter/db/runinfo-aio.php, datacenter/db/runinfo.php, 
     datacenter/db/sequinfo-aio.php, datacenter/db/sequinfo.php, 
     datacenter/db/statusrps.php, datacenter/db/statussbs.php, 
     datacenter/db/statussps.php, datacenter/db/ctamcinfo.php:
     - added $timelimits to function StatusQuery()

   * datacenter/db/ctamcinfo.php:
     - bugfix: combining of normal and status group-by is possible now
     - added # of events and # of kilo-events in 'group-by'

   * datacenter/db/ctadefs.php:
     - changed time limit for corsika from 30 to 48 hours
     - added # of events and # of kilo-events for 'group-by'

   * datacenter/db/mcinfo.php:
     - added (interface to monitor mc production (up to now only test
       version for corsika))

   * datacenter/db/mcdefs.php:
     - added (definition of variables for mc production)



 2009/08/03 Daniel Hoehne-Moench, Stefan Ruegamer

   * datacenter/db/menu.php, magicdefs.php:
     - added new columns L3TriggerTable, WheelPos1, WheelPos2 as well as
       the KEY tables Cycle, PI, WorkingGroup and Proposal



 2009/08/03 Daniela Dorner

   * datacenter/db/menu.php:
     - bugfix: query for NightRange field only date from database



 2009/07/29 Thomas Bretz

   * callisto.cc, ceres.cc, ganymed.cc, sponde.cc, star.cc:
     - pipe command line to job

   * mbase/MArgs.[h,cc]:
     - added getter for command line

   * mjobs/MJCalibration.cc, mjobs/MJSpectrum.cc,
     mjobs/MJStar.cc, mjobs/MJCalibrateSignal.cc:
     - write command line to output

   * mjobs/MJob.[h,cc]:
     - added data member to store the command line

   * mtrigger/MTriggerPattern.h:
     - added efault argumtn to Print()

   * mjobs/MJStar.cc:
     - added a sanity check for empty sequences
     - write MCorsikaEvtHeader and MCorsikaRunHeader to output

   * mjobs/MJSimulation.cc:
     - use a MParameterCalc to calculate and later store the
       incident angle



 2009/07/28 Thomas Bretz

   * mjobs/MJCalibration.cc:
     - we have to allow all kind of triggers together with a 
       calibration trigger, otherwise we never have enough 
       calibration events if the trigger signals haven't been
       switched off (prescaled)

   * mtrigger/MTriggerPatternDecode.cc:
     - when we move L1TPU to L1 as a workaround we now really "move"
       the bit instead of just copy it (this is better for filters
       like "deny all")



 2009/07/04 Daniela Dorner

   * datacenter/db/ctamcinfo.php, datacenter/db/ctadefs.php, 
     datacenter/db/menu.php, datacenter/scripts/jobmanager:
     - changed fCorsikaSimtelArray to fCorsikaSimTelarray



 2009/07/02 Thomas Bretz

   * manalysis/MGeomApply.cc:
     - cosmetics to a comment

   * melectronics/ElectronicsLinkDef.h, melectronics/Makefile:
     - removed MPulseShape

   * mhbase/MHMatrix.cc:
     - improved memeory managment when matrix size is growing

   * mjobs/MJCalibrateSignal.cc:
     - added MCorsikaRunHeader and MCorsikaEvtHeader to output
       for completeness

   * mjobs/MJCalibration.cc:
     - improved the filter for the trigger pattern



 2009/07/01 Thomas Bretz

   * mreport/MReportDrive.cc:
     - fixed typo in version number

   * mjobs/MJob.cc:
     - improved check for write permissions

   * mfileio/MWriteRootFile.cc:
     - option should not only contain "memory" it should be identical
       to "memory"



 2009/06/28 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C
     - fixed typo in Arehucas Version: 090661-0 -> 090616-0



 2009/06/26 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C
     - inserted Arehucas version 090616-0

   * datacenter/macros/fillcamera.C:
     - changed number of digits for thetamin, thetamax, pmin, pmax
     - fPhiMin (pmin) and fPhiMax (pmax) are now filled into 
       MyMagicMonteCarlo



 2009/06/22 Daniela Dorner

   * datacenter/db/showplots.php, datacenter/db/showplots-ds.php, 
     datacenter/db/showplots-seq.php:
     - additional information on the sequence is displayed on mouse-over
       on the path of the file

   * datacenter/db/plotinclude.php:
     - implemented function for mouse-over in showplots*.php

   * datacenter/db/showplots.php:
     - adapted layout of menu to new feature



 2009/06/20 Thomas Bretz

   * mbase/MLut.[h,cc]:
     - renamed Default to DefaultCol
     - added DefaultRow
     - added Print
     - added some const qualifiers

   * mbase/MParList.cc:
     - make sure a parlist is not added to itself
     - improved some debug output

   * melectronics/MAvalanchePhotoDiode.[h,cc]:
     - keep a time-stamp fTime
     - added functions to "relax/evolve" the apd over a given time

   * mgeom/MGeomCamDwarf.cc:
     - fixed a broken comment

   * mjobs/MJPedestal.cc:
     - improved output in case of error

   * mjobs/MJSimulation.cc:
     - implemented a PreCut (to gain processing time)
     - implemented the correct type id in the file name

   * mpedestal/MPedCalcPedRun.cc:
     - check for the run-number only if real data

   * mraw/MRawRunHeader.[h,cc]:
     - added GetRuntypeChar
     - fixed a bug which returned the runtype instead of the
       telescopenumber

   * mreport/MReport.cc:
     - added a new report version number 200905170 (preliminray!)

   * mreport/MReportDrive.cc:
     - added a fix for the starguider sttaus in the report

   * msimcamera/MSimAPD.cc:
     - instead of a full initialization of the APD before each event
       we now only simulate a time evolution which is needed to relax
       a cell to one permille error. This is much faster.

   * msimcamera/MSimTrigger.[h,cc]:
     - allow switching off of the electronics trigger
     - replaced the real coincidence by better and faster algorithm
     - the new algorithm also supports multiplicity triggers
     - therefore added fMinMultiplicity
     - updated the handling and ouput in case of empty coincidence maps

   * mtrigger/MTriggerPattern.h:
     - added some information in the bit description

   * mtrigger/MTriggerPatternDecode.cc:
     - fixed the decoding for runs for which L1TPU was connected
       instead of L1

   * megom/MGeomCamFact.[h,cc]:
     - added

   * megom/Makefile, mgeom/GeomLinkDef.h:
     - added MGeomCamFact



 2009/06/18 Daniela Dorner

   * mjobs/MDataSet.h:
     - fixed typo in comment



 2009/06/16 Daniela Dorner

   * datacenter/db/plotinclude.php, datacenter/db/plotdb.php:
     - implemented feature to query/plot only data of one source (with
       regular expressions)



 2009/06/12 Daniela Dorner

   * datacenter/db/include.php:
     - adapted path of plus.png and minus.png

   * datacenter/db/index-footer.html:
     - adapted footer

   * datacenter/db/menu.php:
     - added functions for CTA MC

   * datacenter/db/ctadefs.php:
     - added (analog file to magicdefs.php for CTA)

   * datacenter/db/ctamcinfo.php:
     - added (website to display info about produced CTA MC)

   * macros/starvisyear.C:
     - added includes for compiling

   * datacenter/scripts/sourcefile:
     - replaced case- by if-statement in checklock()
     - added more information to the output to the lockfile
     - added processlog in makedir()
     - improved processlog output and layout of queries
     - added option to query only jobs for one node

   * datacenter/scripts/jobmanager:
     - added option for production of cta mc

   * datacenter/scripts/jobmanager, datacenter/scripts/setup:
     - added $totalmax which can overwrite $pnototal[$hour]



 2009/06/09 Daniela Dorner

   * mbase/MSpline3.cc:
     - added include of TMath



 2009/06/05 Stefan Ruegamer, Daniel Hoehne-Moench

   * Mars-2.3/datacenter/macros/filldotrun.C
     - inserted Arehucas versions 090522-0 and 090525-0



 2009/05/15 Thomas Bretz

   * ganymed.rc, ganymed_wobble.rc, ganymed_onoff.rc:
     - fixed names for Hadronness Cut



 2009/05/15 Thomas Bretz

   * ganymed.rc, ganymed_wobble.rc, ganymed_onoff.rc:
     - fixed names for Hadronness Cut



 2009/05/10 Thomas Bretz

   * ceres.cc:
     - added usage of sequence files
     - added new options for pedestal and calibration mode

   * mbase/MDirIter.[h,cc]:
     - added AddFile member function

   * mbase/MArgs.[h,cc]:
     - added member function to remove an argument from the list

   * mgeom/MGeomPix.h:
     - added Getter for Width in x and y

   * mjobs/MJSimulation.[h,cc]:
     - added fOperationMode
     - added use of sequence
     - name ceres file according to sequence number
     - changes to the binnings 

   * mjobs/MSequence.[h,cc]:
     - unified the usual and the default constructor
     - don't output default values in Print
     - added kCorsika files



 2009/04/29 Thomas Bretz

   * msimcamera/Makefile:
     - added -I../msimreflector



 2009/04/28 Thomas Bretz

   * mjobs/MJStar.cc:
     - allow to run thru even if discriminator threshold are missing



 2009/04/26 Thomas Bretz

   * mraw/MRawFileRead.cc:
     - added consistency check for two consecutive headers

   * mraw/MRawRunHeader.[h,cc]:
     - added copy constructor
     - added member function for conistency check



 2009/04/16 Thomas Bretz

   * mbase/MEvtLoop.cc:
     - make sure that no negative values for the estimated time
       is shown

   * mcorsika/MCorsikaEvtHeader.cc:
     - calculate impact in the telescope dish plane and not on the
       ground

   * mhflux/MHCollectionArea.cc:
     - initialize more variables in the constructor as suggested
       by valgrind

   * mpointing/MHPointing.cc:
     - set the maximum such that both axis are scaled correctly

   * msimcamera/MSimBundlePhotons.cc:
     - added some more output

   * resmc/dwarf-pde-gapd.txt:
     - used new curve from ETH
     - extrapolated curve on both ends linearily

   * resmc/dwarf-reflectivity.txt:
     - extrapolated linearily to 980 nm

   * resmc/magic-pde.txt:
     - set to 0 at 900nm

   * resmc/magic-reflectivity.txt:
     - extrpolated to 900nm

   * msimcamera/MSimReadout.cc:
     - small improvement to sanity check to allow having less channels
       than pixels

   * mreport/MReport.cc:
     - added once more a fix for a wrong Arehucas version

   * mbase/MSpline3.[h,cc]:
     - added functions to return the analytical integral
       of the spline

   * mjobs/MJSimulation.[h,cc]:
     - replaced the 2D histogram with the impact on ground with
       a 1D histogram with the impact perpendicular to Alt/Az
     - Use a MParSline instead of MPulseShape
     - Use MParSplines as input for MSimAbsorption
     - increased the number of bins for the threshold histogram
     - adapted BinningImpact
     - added another histogram for the event distribution after cleaning
     - changed the default number of the NSB to fit the new input
       definition
     - added histogram for MNewImagePar
     - added tab "Info2"
     - added all MHPhotonEvent to the paremeter list to allow access 
       of the ReadEnv

   * msim/MSimAbsorption.[h,cc]:
     - moved the spline code to MParSpline
     - use MParSpline as new input

   * msimcamera/MSimCalibrationSignal.[h,cc], msimcamera/MSimCamera.[h,cc],
     msimcamera/MSimGeomCam.[h,cc]:
     - replaces MPulseShape by MParSpline

   * msimcamera/MSimRandomPhotons.[h,cc]:
     - scale NSB rates like it is done in Eckart's paper
     - write rates to an output container

   * ceres.rc:
     - adapted

   * msimcamera/MSimAPD.[h,cc]:
     - take the acidental rate from a container

   * mbase/Makefile, mbase/BaseLinkDef.h:
     - added MParSpline

   * mbase/MParSpline.[h,cc]:
     - added

   * msim/MSimAtmosphere.cc:
     - fixed a bug which caused the aerosol coefficient to be
       incorrectly initialized



 2009/04/01 Thomas Bretz

   * Makefile.conf.linux:
     - removed accidental '-g'

   * Makefile.conf.linux:
     - removed -Wconversion (produces too much output on newer
       compilers)

   * ceres.rc, mjobs/MJSimulation.cc:
     - added a cut "Cut" after image parameter calculation
     - updated noise numbers

   * resmc/dwarf-pde-gapd.txt:
     - upadted with a more reliable curve from theeth meeting page
       (linear extrapolate below 350nm)



 2009/03/30 Thomas Bretz

   * manalysis/MMcCalibrationUpdate.cc:
     - fixed a conditional which prevented the display from
       correctly process raw data

   * mgeom/MGeomCamSquare.cc:
     - shifted pixels to be centered around 0

   * msimcamera/MSimCamera.cc:
     - added an additional sanity check

   * mhbase/MH.cc:
     - added "temp" to palette



 2009/03/27 Stefan Ruegamer

   * datacenter/scripts/checkstardone
     - added missing ;; for the case-switching



 2009/03/24 Stefan Ruegamer

   * mhflux/MHAlpha.cc
     - changed in DrawAll the line color of on-off to blue



 2009/03/23 Thomas Bretz

   * resources/starguider01000534.txt:
     - added

   * mbase/MStatusDisplay.cc:
     - if no MStatusArray is found now all object are drawn

   * mfileio/MWriteRootFile.[h,cc]:
     - trees to be copied can now be made optional

   * mhbase/MH.cc:
     - included TProfile2D for newer root versions

   * mjobs/MJCalibrateSignal.cc:
     - made the copy of "OriginalMC" optional. Now it also works
       for non-ceres (original MMCS) files again which don't 
       have this tree.



 2009/03/19 Daniel Hoehne-Moench

   * datacenter/scropts/mcsequences:
     - bugfix: replaced $user by $us
     - bugfix: fPriority is now inserted into the correct table



 2009/03/16 Thomas Bretz

   * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
     - added new starguider calibration since 1000534

   * datacenter/macros/plotdb.C, datacenter/macros/plotrundb.C:
     - added option to set ds-number in datset

   * mgeom/MGeomCamMagic.cc:
     - fixed layout of the MII camera

   * mpointing/MPointingDevCalc.cc:
     - updated informations



 2009/03/16 Daniel Hoehne-Moench

   * datacenter/scripts/fillcamera
     - bugfix: the first line was moved by a tabulator



 2009/03/16 Stefan Ruegamer

   * datacenter/scripts/makecallistolinks
     - added >/dev/null in line 68 to prevent the mails to dc@astro
     - removed the -v for the ln

   * datacenter/scripts/sourcefile
     - added printprocesslog for rm -v in the finish function (mails)



 2009/03/15 Thomas Bretz

   * mgeom/MGeomCam.[h,cc]:
     - added member function to get the total sensitive area of the
       camera

   * mgeom/MGeomCamMagic.cc:
     - included TMath for newer root versions



 2009/03/07 Thomas Bretz

   * RELEASE V2.3



 2009/03/06 Thomas Bretz

   * datacenter/macros/plotrundb.C datacenter/macros/fillstar.C:
     - added RunDataCheck access

   * mreflector/MRflEventData.cc:
     - replaced DistanceToPrimitive by IsInside



 2009/03/05 Thomas Bretz

   * mreport/MReportCamera.cc:
     - fixed a problem if the HVFIL section is empty

   * merpp.cc:
     - added --dev-null option to Usage output

   * mjobs/MJMerpp.[h,cc]:
     - fixed operation in --dev-null mode



 2009/03/04 Thomas Bretz

   * datacenter/macros/plotdb.C:
     - updated some binnings

   * datacenter/macros/fillganymed.C:
     - use the primary also when inserting

   * mgeom/GeomLinkDef.h:
     - added MGeomCamMagicII

   * mgeom/MGeom.[h,cc]:
     - added option to set position
     - removed DistanceToPrimitive, use IsInside instead

   * mgeom/MGeomCam.[h,cc]:
     - added a virtual function to CreateNN
     - added a workaround after reading by calling CreateNN
       because with the last changes the pixel indices get lost

   * mgeom/MGeomCamCT1.[h,cc]:
     - now derives from MGeomCamDwarf
     - accordingly increased version number

   * mgeom/MGeomCamDwarf.[h,cc]:
     - removed Clone -> now in MGeomCam

   * mgeom/MGeomCamMagic.[h,cc]:
     - added MGeomCamMagicII <preliminary>

   * mgeom/MGeomCamSquare.[h,cc]:
     - removed creation of next neighbors -> now automatic

   * mgeom/MGeomPix.[h,cc]:
     - added rotation angle in terms of cos(phi) and sin(phi)
     - rotate in PaintPrimitive
     - adapted IsInside accordingly

   * mgeom/MGeomRectangle.[h,cc]:
     - if only width is given assume a square
     - make sure that the box is correctly painted for all root versions
     - fixed distance to farthest point

   * mgui/MHexagon.[h,cc]:
     - removed obsolete dependence on MGeomPix

   * mhist/MHCamera.cc, mtools/MagicJam.cc:
     - replaced DistanceToPrimitive by IsInside

   * mjobs/MJSimulation.cc:
     - replaced accidental _I_ in file names by _Y_

   * mreport/MReportCC.[h,cc]:
     - added version >=200809030
     - improved modularity of code



 2009/03/03 Thomas Bretz

   * ceres.rc:
     - added some more infomation
     - updated paths

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added atmospheric layers
     - added interpretation of new XSCATT/YSCATT in newer corsikas

   * msim/MSimAtmosphere.[h,cc]:
     - changed path
     - MAtmosphere doesn't search for any files per default anymore
     - changed atmopsheric layers to the ones fitted by Corsika
     - added possibility to change input files to ReadEnv

   * msimcamera/MSimCalibrationSignal.cc:
     - don't create a camera geometry yourself
     
   * resmc/atmosphere-aerosols.txt, resmc/atmosphere-ozone.txt,
     resmc/ct1-pde.txt, resmc/dwarf-apdmap.txt, resmc/dwarf-cones.txt,
     resmc/dwarf-pde-gapd.txt, resmc/dwarf-reflectivity.txt,
     resmc/dwarf-reflector.txt, resmc/magic-cones-inner.txt,
     resmc/magic-pde.txt, resmc/magic-reflectivity.txt,
     resmc/magic-reflector-chessboard.txt, resmc/magic-reflector.txt,
     resmc/magic-trigger-1NN.txt, resmc/magic-trigger-2NN.txt,
     resmc/magic-trigger-3NN.txt, resmc/magic-trigger-4NN.txt:
     - added

   * mhist/Makefile:
     - removed accidental MHQuality

   * mhist/MHCamera.cc:
     - fixed a warning when calling DistancetoPrimitive

   * mgeom/MGeomCamSquare.cc:
     - accidentaly used Double_t instead of Short_t when calling
       SetNeighbors
     - changed number of pixels from UInt_t to Short_t. It doesn't make
       sense to support more pixels than we can store as index for
       neighbors

   * Makefile:
     - added mreflector to resolve unresolved symbols



 2009/03/02 Daniela Dorner

   * datacenter/db/plotdb.php:
     - adapted width of table



 2009/03/02 Thomas Bretz

   * mgeom/MGeomCam.[h,cc], msimreflector/MMirror.h,
     msimreflector/MMirrorDisk.[h,cc], msimreflector/MMirrorHex.[h,cc],
     msimreflector/MMirrorSquare.[h,cc], msimreflector/MReflector.[h,cc]:
     - added GetA member function

   * manalysis/MCameraData.cc, mbadpixels/MBadPixelsCalc.cc,
     mbadpixels/MBadPixelsCam.cc, mbadpixels/MBadPixelsTreat.cc,
     mcalib/MCalibrationCam.cc, mcalib/MCalibrationChargeCalc.cc,
     mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationPulseTimeCam.cc,
     mcalib/MCalibrationRelTimeCalc.cc, mcalib/MCalibrationRelTimeCam.cc,
     mcalib/MCalibrationTestCalc.cc, mcalib/MCalibrationTestCam.cc,
     mcorsika/MCorsikaEvtHeader.cc, mfilter/MFSoftwareTrigger.cc,
     mgeom/MGeomCam.cc, mhcalib/MHCalibrationCam.cc,
     mhcalib/MHCalibrationChargeCam.cc,  msignal/MSignalCam.cc,
     mhcalib/MHCalibrationPulseTimeCam.cc, mpointing/MPointingPos.h, 
     mhcalib/MHCalibrationRelTimeCam.cc, mhft/MHexagonalFTCalc.cc,
     mhist/MHCamera.cc, mimage/MHillas.cc, mimage/MNewImagePar.cc,
     mjobs/MJCut.cc, mjobs/MJSimulation.cc, mpedestal/MPedPhotCam.cc, 
     mpedestal/MExtractPedestal.cc, mpedestal/MPedestalCam.cc, 
     msimcamera/MSimGeomCam.cc, msimcamera/MSimRandomPhotons.cc:
     - replaced MGeomPix by MGeom

   * mjobs/MJStar.cc:
     - added BinningDist
     - converted Muon cuts from mm to deg

   * mhflux/MHCollectionArea.cc:
     - fixed a problem that a plot disappeared in old files

   * mmuon/MMuonSearchPar.cc:
     - switched off the check in Paint (this works only for MAGIC :( )

   * datacenter/macros/fillganymed.C:
     - simplified by using MSQLMagic instead of MSQLServer



 2009/03/01 Thomas Bretz

   * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc:
     - added pointing model 328198

   * mbase/MSpline3.h:
     - added a cast to make it compile with root 5.18

   * melectronics/MPulseShape.cc:
     - included TH1 to make it compile with root 5.18

   * mhflux/MAlphaFitter.[h,cc]:
     - convert MString::Format to Data() 
     - added type SignificanceSqrtExcess

   * mhflux/MHFalseSource.cc, mjobs/MJSpectrum.cc:
     - convert MString::Format to Data() 

   * mhist/MHCamera.cc:
     - changed some const TString to const char to resolve 
       ambiguity in root 5.18 in TF1 constructor

   * msim/MHPhotonEvent.cc:
     - use TMath::Abs instead of abs 

   * msim/MSimPointingPos.[h,cc]:
     - moved getter and setter to source file to avoid including of
       TMath

   * mgeom/MGeom.[h,cc]:
     - added

   * mgeom/MGeomRectangle.[h,cc]:
     - added

   * mgeom/MGeomCamSquare.[h,cc]:
     - added

   * mgeom/Makefile, mgeom/GeomLinkDef.h:
     - added MGeom
     - added MGeomRectangle
     - added MGeomCamSquare

   * Makefile.rules:
     - removed dependance on ROOTSYS from rmkdepend. It should be in 
       the path anyway as rootcint

   * ceres.rc:
     - added an example of setting the APD type

   * mbadpixels/MBadPixelsCam.[h,cc], mbadpixels/MBadPixelsTreat.cc,
     mcalib/MCalibrationChargeCalc.cc, mcalib/MCalibrationTestCalc.cc,
     mfilter/MFSoftwareTrigger.cc:
     - replaced references to MGeomPix by references to MGeom

   * mbase/MStatusDisplay.cc:
     - evaluate the return code of fwrite as suggested by newer 
       gcc versions
     - set a paranthesis as suggested by a warning 

   * mgeom/MGeomCam.[h,cc]:
     - adapted to the changes in MGeomPix/MGeom
     - added SetAt function for external setup
     - added Copy constructor

   * mgeom/MGeomCamCT1.cc, mgeom/MGeomCamDwarf.cc, 
     mgeom/MGeomCamMagic.cc, mhft/MHexagonFreqSpace.cc,
     mimage/MHillas.cc, mimage/MHillasExt.cc,
     mimage/MImgCleanStd.[h,cc], mimage/MNewImagePar.cc,
     mimage/MNewImagePar2.cc, mmuon/MHSingleMuon.cc,
     msignal/MSignalCam.cc, mtools/MagicJam.cc,
     
     - adapted to the changes in MGeomPix/MGeom
     - use SetAt for setup

   * mgeom/MGeomPix.cc:
     - moved most of the code to new base class MGeom
     - now derives from MGeom
     - increased version number accordingly

   * mhbase/MBinning.cc:
     - replaced a Int_t by UInt_t as suggested by a warning

   * mhbase/MH.cc:
     - added a const_cast for GetObjectInfo (should be const,
       but isn't)

   * mhbase/MHMatrix.cc, mhflux/MHAlpha.cc, mhflux/MHThetaSq.cc,
     mhflux/MHThetaSqN.cc, mhist/MHCamEventRot.cc, hvstime/MHVsTime.cc,
     mjobs/MJStar.cc, mraw/MRawEvtHeader.cc:
     - added paranthesis as suggested by a warning

   * mhft/MGeomCamMagicXT.[h,cc]:
     - replaced by deriving from MGeomCamDwarf

   * mhist/MHCamera.cc:
     - adapted to the changes in MGeomPix/MGeom
     - use SetAt for setup
     - use new PaintPrimitive to skip the usage of MHexagon

   * mmc/MMcTrigHeader.hxx:
     - fixed wrong condition in SetTrigger

   * msimcamera/MSimAPD.[h,cc]:
     - added a possibility to switch between the 50mu and 100mu
       Diodes

   * mtools/MagicCivilization.[h,cc], mtools/MagicDomino.[h,cc],
     mtools/MagicReversi.[h,cc], mtools/MagicShow.[h,cc],
     mtools/MagicSnake.[h,cc], mtools/MineSweeper.[h,cc],
     - adapted to the changes in MGeomPix/MGeom, therefore restructered
       the code to get rid of MHexagon

   *  mmovie/MMovieWrite.cc:
     - allow to switch off timing via preprocessor directive
     - replaced MGeomPix by MGeom
     - slightly changed palette
     - evaluate return of fwrite

   * mbase/MQuaternion.h, msim/MPhotonData.h:
     - added a workaround for sqrt in root 5.18/00



 2009/02/26 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - implemented new SuperArehucas version



 2009/02/23 Thomas Bretz

   * mcorsika/MCorsikaRunHeader.cc:
     - switched off the impact max workaround - it doesn't work
     - initialize fImpact Max
     - print also number of used ATMEXT

   * mhbase/MH.cc:
     - improved setting of binning from the parameter list in the
       n-D case

   * mhbase/MH3.cc:
     - imporved output

   * mhflux/MHCollectionArea.cc:
     - also collect the maximum impact while running for a nicer
       behaviour of the plots

   * mhflux/MHThreshold.cc:
     - allow setting of a dedicated Threshold binning

   * mimage/MHHillasExt.cc:
     - converted slope binning to deg

   * mjobs/MJSimulation.cc:
     - write MMcCorsikaRunHeader
     - changed binnings
     - added new binning
     - now display the signal unscaled
     - show threshold and collection area only for data runs

   * msim/MSimMMCS.cc:
     - make setting of directions depending on view-cone option

   * msim/MSimPointingPos.[h,cc]:
     - added class description
     - removed obsolete fPointingCorsika
     - improved output
     - added option for homogenous distribution

   * mmuon/MMuonCalibParCalc.cc:
     - converted cuts from mm to deg so they will work also for other
       geometries



 2009/02/20 Thomas Bretz

   * mmuon/MHMuonPar.[h,cc]:
     - updated class version number after fMm2Deg got removed

   * mpointing/MHSrcPosCam.cc:
     - fixed the fill style of the ellipse to produce correct ps-files



 2009/02/19 Daniela Dorner

   * datacenter/scripts/buildsequenceentries, 
     datacenter/scripts/checkfilesforsequenceavail, 
     datacenter/scripts/checkstardone, datacenter/scripts/correcttime,
     datacenter/scripts/dbchk, datacenter/scripts/dodatacheck,
     datacenter/scripts/doexclusions, datacenter/scripts/fillcallisto, 
     datacenter/scripts/fillcamera, datacenter/scripts/fillganymed, 
     datacenter/scripts/fillstar, datacenter/scripts/insertdatasets, 
     datacenter/scripts/makecallistolinks, 
     datacenter/scripts/mcsequences, datacenter/scripts/movingrawfiles, 
     datacenter/scripts/movingrawfiles_OK, datacenter/scripts/runcamera,
     datacenter/scripts/runcorsika, datacenter/scripts/runreflector,
     datacenter/scripts/sourcefile, 
     datacenter/scripts/writedatasetfiles, 
     datacenter/scripts/writesequencefiles:
     - removed scriptlog

   * datacenter/scripts/jobmanager: 
     - fixed typo



 2009/02/19 Thomas Bretz

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - reformatted output
     - added "Options" to output
     - made Has const
     - added a workaround to get the maximum simulated impact
       although it is not officially stored in the file

   * msim/MHPhotonEvent.cc:
     - improved automatic binning

   * msim/MPhotonData.[h,cc]:
     - added GetCosW2
     - added GetSinW2
     - added GetSinW

   * msim/MSimAbsorption.cc:
     - don't check wavelength range when theta should be used

   * msimcamera/MSimAPD.cc:
     - check for uninitialized indices

   * msim/MPhotonEvent.[h,cc]:
     - moved the code for MyClonesArray to the source file
     - improved a lot the reading speed by reading larger blocks
       of data from the file at once
     - improved memory handling. This ensures that even the largest
       events don't fill the memory forever and the allocated memory
       is free'd again after some time

   * msimreflector/MSimReflector.cc:
     - Use the new Resize function of MPhotonEvent to make sure
       that the memory is not allocated forever.

   * mimage/MHHillas.cc, mimage/MMHillas.Ext.cc, mimage/MHHillasSrc.cc:
     - converted default binning from mm to deg

   * mraw/MRawRunHeader.cc:
     - print less when values doen't have any meaning

   * msim/MSimAtmosphere.[h,cc]:
     - added

   * msim/SimLinkDef.h, msim/Makefile:
     - added MSimAtmosphere

   * mjobs/MJSimulation.cc:
     - added simulation of atmosphere
     - clean isolated pixels away before calculating image parameters
     - don't clean calibration runs
     - correct displayed az by magnetic field
     - added auto range for the 2D histograms
     - set automatic binning for dist
     - added tab with histogram for trigger area and threshold

   * readcorsika.cc:
     - implemented -ff option

   * mcorsika/MCorsikaRunHeader.cc:
     - improved Print output

   * mimage/MImgCleanStd.cc:
     - fixed the checks for the cleaning parameters there 
       where some wrong conditions

   * msim/MSimMMCS.cc:
     - fixed typo in a comment

   * ceres.rc:
     - added units for psf
     - some small updates

   * msimreflector/MSimReflector.cc:
     - convert units of psf from mm to cm
     - Use MPointingPos instead of PointingCorsika, ARRANG already
       rotates all vectors accrodingly

   * msim/MSimPointingPos.cc:
     - don't write PoinitingCorsika anymore. ARRANg already includes
       the rotation

   * mgeom/MGeomCamMagic.[h,cc]:
     - added a constructor which allows to set the focal distance

   * msimcamera/MSimAPD.cc, msimcamera/MSimGeomCam.cc,
     msimcamera/MSimRandomPhotons.cc, msimreflector/MSimReflector.cc:
     - don't create an object if MGeomCam not found, try "MGeomCam"
       as default instead

   * mhflux/MHCollectionArea.[h,cc]:
     - added MMcRunHeader to data members to be able to check
       the maximum impact in Finalize for the case the maximum
       impect is collected "on-line" from the events
     - if the event distribution comes just from the spectrum fill
       the distribution event by event to get correct errors
     - romved some old obsolete code

   * msim/MSimMMCS.[h,cc]:
     - added MMcRunHeader to data members to allow to collect the
       maximum impact from the events



 2009/02/18 Thomas Bretz

   * datacenter/scripts/runcorsika:
     - added a comment

   * mbase/MParList.cc:
     - when adding a TCollectionn only add MParContainers

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added reading of Atmospheric coefficients
     - added reading of Cherenkov Flag
     - added corsika's Earth Radius

   * melectronics/MDigitalSignal.[h,cc]:
     - added and initialized an index to allow to "connect"
       the digital signal to a channel

   * mjtrain/MJTrainSeparation.cc:
     - replaced kGreen by kBlue

   * mmain/MEventDisplay.cc:
     - added a type==3 which is for ceres-reflector files

   * mmain/Makefile:
     - added -I../mcorsika
     - added -I../msim
     - added -I../msimcamera

   * msim/MHPhotonEvent.[h,cc]:
     - set the binning more automatically from the run-headers
       where possible
     - added RadEnv
     - added Clear function for external access

   * msim/MSimAbsorption.cc:
     - addec const-qualifier for photon

   * msimcamera/MSimGeomCam.cc:
     - allow usage also without pulse and pulse position (for display)

   * msimcamera/MSimSignalCam.cc:
     - allow usage also without TriggerPos
     - added a check whether MSignalCam was correctly initialized



 2009/02/16 Thomas Bretz

   * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc,
     mimage/MHImagePar.cc:
     - replaced green by blue for better readability on projectors

   * mbase/MEnv.[h,cc]:
     - added the option of a default name to allow i/o more similar
       to MParContainer
     - improved Print()

   * ceres.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
     - make use of the new default name of MEnv

   * mjobs/MJSpectrum.cc:
     - read and write ganymed.rc

   * mbase/MParList.cc:
     - if adding a TObjArray add only MParContainers (for sanity)

   * mjobs/MJob.cc:
     - when reading read also TObjects

   * mjobs/MJSpectrum.cc:
     - now read the ganymed.rc and write it to the output

   * mhflux/MHEffectiveOnTime.h:
     - increased class version by 1

   * mhflux/MHAlpha.cc:
     - removed erronornously comittet SetSumw2
     - don't output the numbe rof excess events vs time



 2009/02/15 Thomas Bretz

   * ceres.rc:
     - added the MAGIC I high gain pulse as example

   * sponde.cc:
     - redirect root error handler
     - added new option to force on-time fit

   * datacenter/scripts/runcorsika:
     - added a comment
     - remove empty dat file after corsika finished

   * mbase/MLog.cc:
     - added several more log-levels to handling root's error handler

   * mbase/MPrint.cc:
     - flush buffer before printing
     - set output level to all

   * melectronics/MPulseShape.h:
     - let clone also clone the spline

   * mfileio/MWriteRootFile.cc:
     - don't output title if empty

   * mhflux/MHEffectiveOnTime.[h,cc]:
     - added new data mebers to store the result of the overall-fit
       which is now done in Finalize
     - output the results of the effective on-time fit as inf2
     - increased clas version accordingly

   * mjobs/MJSimulation.[h,cc]:
     - simplified setting up the file structure

   * mjobs/MJSpectrum.[h,cc]:
     - added the possibility to force a new on-time fit.
     - a MHEffectiveOnTime histogram is now always displayed 
       for manual cross checks

   * mjobs/MJStar.cc:
     - added MSrcPosCam for Monte Carlos to output

   * mpointing/MSrcPosCalc.cc:
     - ignore the WobbleMode from the MMcCorsikaRunHeader 
       if it is a ceres file

   * msim/MPhotonEvent.[h,cc]:
     - added function GetTimeFirst
     - added function GetTimeLast
     - added function GetTimeMedianDev
     - added fLength to MPhotonStatistics

   * msimcamera/MSimGeomCam.cc:
     - make use of the new functions
     - set length to statistics container

   * mpointing/MHSrcPosCam.[h,cc], mpointing/MSrcPosRndm.[h,cc],
     mfilter/MFMagicCuts.[h,cc], mmuon/MHMuonPar.[h,cc],
     mhflux/MHThetaSqN.[h,cc]:
     - support changing geometries (conversion factors) reading
       a new geometry from a run header

   * mimage/MHVsSize.[h,cc], mimage/MHNewImagePar.[h,cc],
     mimage/MHHillasSrc.[h,cc], mimage/MHHillasExt.[h,cc],
     mimage/MHHillas.[h,cc], mimage/MNewImagePar2.[h,cc]:
     - removed option to set conversion factor manually
     - support changing geometries (conversion factors) reading
       a new geometry from a run header
     - increased class version by one

   * mhflux/MMcSpectrumWeight.cc:
     - replaced Form by MString::Format

     - made sure that nobody is mixing different energy-range monte
       carlos and normalizes by integral (to be implemented)

   * manalysis/MMcCalibrationUpdate.cc:
     - switched off file Ceres files (this might only be temporary
       but it makes the display work quite well even without
       calibrated units.

   * mjobs/MJCalibrateSignal.cc:
     - updated the rule to allow for file names without the leading date

   * mjobs/MJSpectrum.[h,cc]:
     - set the kMustCleanup bit for sanity
     - replaced a lot of Form by MString::Format
     - moved the getting of the right Alpha-histogram to GetHAlpha
     - the tlist2 doesn't neet to replace anything because all previous
       tasklists added to the list have been removed again
     - "DataType" already in parlist? Don't add a second one
     - replaced some gLog by fLog
     - make sure that the "Done." message is printed even in case
       no output is written at the end

   * ceres.rc:
     - added some more info

   * datacenter/scripts/runcorsika:
     - added magnetic field Azimuth direction (ARRANG), currently
       at ~ -7deg at La Palma

   * mbase/MLog.cc:
     - finallyadded a really stupid hack/workaround to suppress these
       annoying errors in case of a log-scale set too early

   * mbase/MTask.[h,cc]:
     - Replaced OverwritesProcess by Overwrites

   * mcorsika/MCorsikaEvtHeader.cc:
     - fixed particle momentum coordinate system

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added magnetic field values
     - improved output

   * mjobs/MJSimulation.cc:
     - updated height scale
     - use MPhotonStatistics.fLength
     - plot median dev of photon arrival times

   * mmc/MMcRunHeader.hxx:
     - added a getter IsCeres
     - added a setter for the Corsika Version

   * mpedestal/MMcPedestalCopy.cc:
     - use the new IsCeres

   * msim/MSimMMCS.[h,cc]:
     - use the telescope pointing in telescope coordinates for MMcEvt
     - correct the shower direction by the magnetic field azimuth
     - set corsika program version

   * msim/MSimPointingPos.[h,cc]:
     - splitted the output into coordinated in the corsika frame
       (module the magnetic field) and the poiting direction in
       telescope coordinates
     - added possibility to "observe" in off-target mode

   * msimreflector/MSimReflector.cc:
     - use new pointing direction in the corsika frame




 2009/02/13 Thomas Bretz

   * mcorsika/MCorsikaEvtHeader.h:
     - added some comments on the coordinate system

   * ceres.rc:
     - added some comments 
     - setup a psf for the dwarf mirror

   * mcorsika/MCorsikaRunHeader.h:
     - added some comments

   * mjobs/MJSimulation.cc:
     - added some histogram titles
     - fixed the x, y coordinates of the impact histogram
     - write "ElectronicNoise"

   * mjobs/MJStar.cc:
     - don't force writing of containers which are not filles by ceres
     - updated rule to support files without date

   * mpedestal/MPedestalPix.[h,cc]:
     - added Print() function

   * mraw/MRawFileRead.cc:
     - added a comment

   * msim/MPhotonData.h:
     - added comments about coordinate system

   * msimcamera/MSimGeomCam.cc:
     - when looking for the pixels convert from ceres-coordinates
       to GeomCam camera-coordinates

   * msimreflector/MMirror.h:
     - added Setter for SigmaPSF

   * msimreflector/MMirrorDisk.cc, msimreflector/MMirrorHex.cc,
     msimreflector/MMirrorSquare.cc:
     - now start counting in ReadM with 0

   * msimreflector/MReflector.[h,cc]:
     - added some documentation
     - added function to set psf of all mirrors
     - added psf optional to input file
     - remove already evaluated tokens from TObjArray
     - added reading of a default psf from the input file

   * mjobs/MSequence.cc:
     - fixed a bug in GetArrays which could cause seg-faults
     - added a sanity check



 2009/02/12 Thomas Bretz

   * datacenter/macros/fillsources.C:
     - updated

   * mfileio/MWriteRootFile.[h,cc]:
     - added some comments
     - renamed GetNewFileName to SubstituteName
     - made SubstituteName static

   * mhist/MHCamera.cc:
     - fixed the number in the legend (was wrong since last update)

   * mjobs/MDataSet.cc:
     - replaced From by MString::Format

   * mjobs/MJSimulation.cc:
     - a lot of things were renamed
     - the refelctor can now be set from the setup file
     - changed the binning for the event width
     - removed plot "CamShadow"
     - changed rules for file names

   * ceres.rc:
     - updated according to the changes in MJSimulation

   * mjobs/MSequence.cc:
     - replaced use of Form by MString::Format
     - allow non-setting of fNight
     - don't print period if -1

   * mmain/MEventDisplay.cc:
     - decode trigger pattern for display 

   * mmain/Makefile:
     - included mtrigger

   * msim/MHPhotonEvent.cc:
     - search Reflector instead of MReflector

   * msim/MSimAbsorption.cc:
     - added some info output

   * msimcamera/MSimAPD.[h,cc]:
     - added an option to set the geom cam name. Can be used to skip 
       this task

   * msimcamera/MSimCamera.[h,cc]:
     - allow to set BaselineGain from resource file

   * msimreflector/MSimReflector.cc:
     - removed CamShadow container
     - search Reflector instead of MReflector

   * Makefile:
     - removed mreflector

   * mcalib/MCalibrationPatternDecode.cc:
     - in case of pattern==0 and MCs set the color to CT1. This is
       a workaround because the bits don't allow to set is explicitly
     - removed the check for the kCT1Pulser bit. It can never be true
     - consequently removed the kCT1Pulser bit

  * mpedestal/MMcPedestalCopy.[h,cc]:
    - fixed for MUX MCs (the pedestal has to be scaled)
    - added option to process ceres data



 2009/02/11 Thomas Bretz

   * mcalib/MCalibColorSet.[h,cc]:
     - removed some obsolete break statements
     - removed obsolete gkMCRunLimit
     - fixed setting of signal strength for extremely old
       runs (I think we don't have them anyway)

   * mcalib/MCalibrateData.cc:
     - improved output

   * mcalib/MCalibrationChargeCalc.cc:
     - stop if no valid pulser colors have been found

   * mcorsika/MCorsikaRunHeader.h:
     - some cosmetics
     - added some getter

   * mhist/MHEvent.[h,cc]:
     - some improvements to output
     - implemented display for trigger pattern

   * mtrigger/MTriggerPattern.[h,cc]:
     - added Copy-function

   * mhist/Makefile:
     - added -I../mtrigger

   * mmc/MMcEvtBasic.[h,cc]:
     - moved the getter returning a TString to the source file
     - replaced Form by MString::Format

   * mraw/MRawRunHeader.cc:
     - initialize fSourceEpochChar[1]
     - initialize fNumEventsRead
     - suppress more output which has not been initialized
     - removed run-type from SetRunInfo
     - added new function SetRunType
     - use strncpy instead of memcpy
     - replaced const char[] arguments by TString

   * msimreflector/MReflector.[h,cc]:
     - added Print
     - added a circle around the mirror showing fMaxR

   * mastro/MAstro.cc:
     - updated some typos in comments

   * mbase/MEnv.cc:
     - replaced Form by MString::Format

   * mbase/MTask.cc:
     - made the total number of executions really count the total 
       number

   * mcalib/MCalibrationPatternDecode.cc:
     - some cosmetics
     - corrected the use of a wrong FindCreateObj

   * mcorsika/MCorsikaRead.cc:
     - added a comment

   * mfileio/MWriteRootFile.cc:
     - improved output
     - improved the copy of a tree (now done without unpacking)
     - made sure that copied trees are shown in the summary
     - made sure that the copied trees are nevertheless deleted

   * mfilter/MFDeltaT.cc:
     - adapted to change in GetNumExecutions

   * mhbase/MFillH.cc:
     - set the number of executions (as it is in MTask) before the
       execution

   * mhbase/MH.cc:
     - improved the statistics output

   * mhist/MHCamera.[h,cc]:
     - don't create an own pad anymore
     - removed SetRange
     - SetRange now done via MH::SetPadRange
     - some sanity checks if fGeomCam is set
     - some adaptions to the new layout scheme without
       an own pad
     - Changed DrawProjection to a more commonly usable scheme
     - Removed all dependencies from MGeomCamMagic
     - start the gaus fit with the maximum not the integral

   * mjobs/MJCalibrateSignal.cc:
     - If the input files contain an OriginalMC tree 
       copy it
     - consequently we make the MMcEvtBasic from the 
       parameter-list optional
     - fixed the rule (MC files with .root as extension could not 
       be processed)

   * mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.[h,cc]:
     - Use MHCamera::CamDraw more extensively
     - replace use of Form by MString::Format

   * mjobs/MJSimulation.cc:
     - added an option to switch the cmaera electronics off
     - write some more containers to output file (for easy access)
     - set the MC bit in the header
     - now use MSimMMCS to "fake" the correct file structure
     - added three new writers to write the MMcEvtBasic information
     - added a display of the most important things

   * mmain/MEventDisplay.cc:
     - don't change into the not more existing pad of a MHCamera

   * msimcamera/MSimCalibrationSignal.cc:
     - adapted GetNumExecution
     - SetReadyToSave for the run header
     - jitter the number of emitted photons
     - corrected the emitted trigger positon
     - (re)set calibration pattern

   * mbase/MLut.[h,cc]:
     - added overload of Delete() function
     - added IsDefault
     - added SetDefault

   * mfileio/MWriteRootFile.cc:
     - fixed output in OpenFile

   * mjobs/MSequence.cc:
     - allow the "Night" resource to be empty

   * msimcamera/MSimBundlePhotons.cc:
     - some small improvements in case of empty maps

   * msimcamera/MSimReadout.[h,cc]:
     - reset gain. Use the new fConversionFactor instead
     - removed some setting of fRunHeader

   * msimcamera/MSimTrigger.[h,cc]:
     - on useer request now offset and gain can be used to 
       convert the signal back into units of phe
     - added possibility to use empty lookup tables
     - added debug output

   * msimcamera/MSimCamera.[h,cc]:
     - outsourced the pedestal and gain numbers into ReInit
     - use an MPedestalCam for Electronic Noise and Gain
     - allow to switch ob whether the gain is applied to the 
       electronic noise or not
     - SetPhotElfromShower

   * msim/Makefile. msim/SimLinkDef.h:
     - added MSimMMCS

   * msim/MSimMMCS.[h,cc]:
     - added

   * msimcamera/Makefile:
     - added -I../mpedestal

   * ceres.rc:
     - added

   * msimreflector/MMirrorSquare.cc, msimreflector/MMirrorHex.cc,
     msimreflector/MMirrorDisk.cc:
     - changed the grey colors

   * msimreflector/MMirrorHex.cc:
     - fixed bugs in CanHit and HasHit



 2009/02/10 Thomas Bretz

   * manalysis/MMcTriggerLvl2Calc.cc:
     - removed obsolete include of MmcRunHeader

   * mbase/MSpline3.[h,cc]:
     - improved the available constructors
     - added some comments for future use
     - added default constructor
     - added GetHistogram()

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added fImpactMax
     - added some Getters

   * melectronics/MPulseShape.[h,cc]:
     - set class version to 1 to make it storable
     - set a title for the splines
     - implemented Paint function

   * mhbase/MH.[h,cc]:
     - added SetPadRange

   * mhist/MHCamEvent.[h,cc]:
     - Init the geometry in ReInit thus it can work with a geometry stored in a file
     - Make sure that histogranms already drawn properly to a pad are found in Paint
     - added RecursiveRemove for sanity

   * mmc/MMcCorsikaRunHeader.h:
     - added SetSpectrum

   * mmc/MMcEvt.hxx:
     - added SetEvtNumber
     - added SetPhotElfromShower

   * mmc/MMcEvtBasic.[h,cc]:
     - added operator=

   * mmc/MMcRunHeader.[hxx, cxx]:
     - set default for the versions to UShort_t(-1)
     - added some comments 
     - added SetNumSimulatedShowers
     - added SetImpactMax

   * mraw/MRawRunHeader.cc:
     - suppress some information in header if not valid

   * msignal/MSignalCalc.cc:
     - if (!fPedestal) we should return kTRUE not kFALSE

   * msimreflector/MMirror.[h,cc], msimreflector/MMirrorDisk.[h,cc],
     msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MReflector.[h,cc],
     - added Print
     - some cosmetics in header
     - set class version to 1 to make it storable

   * mtools/MagicJam.cc:
     - updated



 2009/02/10 Daniela Dorner

   * datacenter/db/tabs.php:
     - if csv-file doesn't exist, only logs are displayed now



 2009/02/08 Thomas Bretz

   * Makefile.conf.linux:
     - added -Winit-self

   * msimcamera/MSimCalibrationSignal.[h,cc]:
     - account for the pulse shape/width
     - make number of photons settable
     - make time jitter settable
     - renamned fNumEntries to fNumEvents
     - don't set daq event number (should be set by the "daq")
     - set trigger pattern
     - print number of events in PreProcess

   * msimreflector/MSimReflector.[h,cc]:
     - made the detector margin settable

   * datacenter/macros/insertcacofile.C, datacenter/macros/insertsequence.C:
     - print an error and exit

   * macros/optim/optimdisp.C:
     - set the default values as default
     - added a short summary what a good strategy for optimization is

   * mastro/MAstro.cc:
     - replaced Form by MString::Form

   * mcorsika/MCorsikaEvtHeader.[h,cc], mcorsika/MCorsikaRunHeader.[h,cc]:
     - moved fParticleID from event header to run header
     - increased Class Version accordingly
     - added an error if more than one observation levels are read

   * mhcalib/MHGausEvents.cc:
     - replaced Form by MString::Form
     - handle the creating of the TF1 fExpFit a bit more "root-safe"

   * mhist/MHCamEvent.[h,cc]:
     - added a new option to collect the maximum or minimum contents

   * mhist/MHCamera.[h,cc]:
     - added new functions SetMax/MinCamContent

   * mraw/MRawEvtHeader.cc:
     - initialize the data members in constructor

   * mraw/MRawEvtHeader.h:
     - removed bits for trigger type they were never used

   * mraw/MRawRunHeader.cc:
     - tiny cosmetics

   * msim/MHPhotonEvent.[h,cc]:
     - added a histogram to display the height
     - don't fill kNightSky photons

   * msim/MPhotonData.h:
     - added getter for fProductionHeight

   * msim/MPhotonEvent.h:
     - commented IsValid (was not used anyhow)

   * msimcamera/MSimGeomCam.[h,cc]:
     - added one sample to the window to allow for time jitter of one sample
     - make the code for the window indentical to MSimCalibrationSignal

   * msimcamera/MSimReadout.[h,cc]:
     - Set the daq event number (readout number)

   * msimcamera/MSimTrigger.[h,cc]:
     - added comments
     - made the signal length settable
     - made the coincidence time settable
     - removed setting of the daq event number (should be done by the "daq")
     - changed the trigger output from all to inf/inf2

   * msimcamera/Makefile:
     - added -I../mtrigger

   * mjobs/MJSimulation.[h,cc]:
     - added new mode to force the use of the trigger "electronics"
     - moved setup of the fadc to the resource file
     - added a new histogram to show the maximum signal in all pixels
     - automatically setup the range of the TrigPos histogram
     - don't show all histograms in all run conditions

   * mraw/MRawRunHeader.[h,cc]:
     - added ReadEnv for a setup from a resource file in ceres

   * msimcamera/MSimAPD.cc:
     - added a sanity check if ReInit has not been called



 2009/02/07 Thomas Bretz

   * sponde.rc:
     - fixed a typo

   * datacenter/scripts/runcorsika:
     - added a comment

   * mbase/MContinue.h:
     - changed a comment

   * mbase/MEnv.h, mbase/MMath.cc:
     - Do not assign a temporary TString to const char *

   * mcamera/MCameraCentralPix.[h,cc]:
     - changed fDC from Float_t to Int_t 

   * mhflux/MHCollectionArea.cc, mhflux/MHDisp.cc, mhflux/MHEnergyEst.cc,
     mhflux/MHFalseSource.cc, mhflux/MHThreshold.cc, mhbase/MFillH.cc,
     mastro/MAstroCamera.cc, mastro/MAstroCatalog.cc, mbase/MContinue.cc,
     mbase/MFilter.cc, mbase/MLog.cc, mbase/MParContainer.cc, mhbase/MH.cc,
     mbase/MParEmulated.cc, mbase/MStatusDisplay.cc, mbase/MTime.cc,
     mhbase/MH3.cc, mhbase/MHn.cc,mhflux/MHAlpha.cc, mhist/MHCamera.cc,
     mhflux/MHEffectiveOnTime.cc, mmuon/MHMuonPar.cc, mmovie/MMovieWrite.cc,
     mhflux/MHFalseSource.cc, mhist/MHCamEvent.cc, 
     mmain/MEventDisplay.cc, mreflector/MHReflector.cc:
     - use MString::Format instead of Form

   * msim/MHPhotonEvent.cc:
     - don't fill kNightSky primaries

   * msim/MPhotonEvent.[h,cc]:
     - return the number of non NightSky photons

   * msimcamera/MSimPSF.cc:
     - changed default for fSigma from 1 to -1

   * mbase/MContinue.cc:
     - changed default title

   * mfileio/MWriteRootFile.cc:
     - set kMustCleanup bit, otherwise it is not correctly deleted from
       the list of cleanups

   * mhbase/MH3.[h,cc]:
     - added RecursiveRemove

   * mhflux/MAlphaFitter.[h,cc]:
     - moved code to source file
     - improved setting of a new fFunc

   * mhflux/MHAlpha.[h,cc], mhvstime/MHSectorVsTime.[h,cc]
     - added RecursiveRemove

   * mjobs/MJSimulation.cc:
     - added MSimPSF
     - Show only the non NightSky photons in the size plot
     - changed the binning of BinningEvtWidth



 2009/02/06 Daniela Dorner

   * datacenter/db/include.php:
     - adapted status-query



 2009/02/05 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - implemented new SuperArehucas version



 2009/02/03 Thomas Bretz

   * mastro/MAstroCatalog.[h,cc]:
     - searches now all catalogs also in the datacenter default path if
       the file could not be found

   * mbase/MStatusDisplay.cc:
     - also print information about added tabs in batch mode

   * mcorsika/MCorsikaEvtHeader.h:
     - fixed a comment

   * mfileio/MWriteRootFile.cc:
     - added some more log-output
     - open a new /dev/null only if none with the same title already exists
     - added some comments

   * mhflux/MHEffectiveOnTime.cc:
     - Don't call PaintText if FitH failed (as suggested by valgrind)

   * mjobs/MJStar.cc, mjobs/MJCalibrateSignal.cc:
     - added a title to all MWriteRootFile

   * mreport/MReportCC.cc:
     - added more comments
     - improved log-output



 2009/02/03 Daniela Dorner

   * datacenter/db/plotdb.php:
     - sequence as default when startup

   * datacenter/db/plotdb.php, datacenter/db/plot.php:
     - added possibility to set size of plot



 2009/02/03 Stefan Ruegamer

   * datacenter/scripts/budb:
     - added getdbsetup



 2009/02/02 Thomas Bretz

   * mcamera/MCameraCentralPix.[h,cc]:
     - added data member fDC
     - increased class version number accordingly

   * mreport/MReportCC.cc:
     - improved debug output
     - remove minus from the third argument in SCHEDULE

   * mreport/MReportCamera.[h,cc]:
     - fixed for ver>=200812140
     - added InterpretePSSEN
     - added InterpreteLIQ

   * msimcamera/MSimCamera.cc:
     - added a time-shift uniformly according to the bin-width



 2009/01/30 Thomas Bretz

   * RELEASE V2.2


 2009/02/02 Thomas Bretz

   * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
     - fixed the regular expresssion



 2009/01/30 Thomas Bretz

   * datacenter/macros/fillcmt.C:
     - added

   * datacenter/macros/plotstat.C:
     - extended loop to show all periods again

   * msim/MPhotonData.cc:
     - don't change the sign of the cosines. The direction of the
       particle doesn't neet to be changed

   * msimreflector/MSimReflector.cc:
     - change the rotation matrix to fit the change in MPhotonData



 2009/01/29 Thomas Bretz

   * melectronics/MPulseShape.cc:
     - changed spline range from -25/25 to -8/8

   * mhflux/MAlphaFitter.cc, mhflux/MHAlpha.cc, mhflux/MHDisp.cc:
     - for sanity (thread safety) replaced Form by MString::Format

   * mhflux/MHDisp.cc:
     - initialize fHalf as suggested by valgrind

   * datacenter/macros/plotdb.C:
     - updated comments

   * resources/calibration_spline.rc:
     - updated



 2009/01/27 Thomas Bretz

  * macros/rootlogon.C:
     - added new subdirectories

   * melectronics/MAnalogSignal.[h,cc]:
     - added the posssibility to add a pulse from a TF1
     - removed the printout if out of range
     - returns whether the range had to be adapted
     - changed the Discriminate function to allow for giving a start
       and end time of the search
     - imporved the fining of the falling and rising edge
     - removed the printout in Discriminate

   * msimcamera/MSimCamera.[h,cc]:
     - moved the pulse shape specific code into a new class MPulseShape
     - Fixed the range of the digitization

   * melectronics/MPulseShape.[h,cc]:
     - added

   * melectronics/Makefile, melectronics/ElectronicsLinkDef.h:
     - added MPulseShape

   * msimcamera/MSimGeomCam.[h,cc]:
     - Fixed the time window for random photons (Maybe move to a later
       step in the analysis?)

   * msimcamera/MSimReadout.cc:
     - call SetReadyToSave for the run-header
     - added some debug output in case of failure

   * msimcamera/MSimSignalCam.[h,cc]:
     - subtract the trigger position of any

   * msimcamera/MSimTrigger.cc:
     - some changes to the debug output

   * mjobs/MJSimulation.[h,cc]:
     - added

   * mjobs/Makefile, mjobs/JobsLinkDef.h:
     - added MJSimulation

   * ceres.cc, showlog.cc, callisto.cc, star.cc, ganymed.cc, sponde.cc:
     - added parenthesis suggested by compiler

   * mbase/MParEnv.cc:
     - included TClass for newwer root versions

   * msimreflector/MReflector.cc:
     - fixed return if read file was not existing

   * msimrelfector/MSimReflector.cc:
     - added sanity check if reflector is valid

   * datacenter/macros/insertdataset.C:
     - added fPriority

   * datacenter/macros/plotoptical.C:
     - write a root-file as the other plot-macros do

   * mreflector/MHReflector.cc:
     - added some SetDirectory(NULL), although this class is a candidate
       for removal

   * mjobs/MJCut.cc, mjobs/MJCalibrateSignal.cc:
     - make the CheckEnv fail if kFALSE is returned



 2009/01/26 Thomas Bretz

   * Makefile:
     - added mcorsika, msim, msimreflector, msimcamera and
       msimelectronics
     - added readcorsika

   * mbase/Makefile, mbase/BaseLinkDef.h:
     - added MParEnv

   * mbase/MParEnv.[h,cc]:
     - added

   * mbase/MParameters.[h,cc]:
     - added ReadEnv to all classes

   * mbase/MParList.cc:
     - return the container within MParEnv if MParEnv found 

   * mbase/MParContainer.cc:
     - fixed a typo

   * manalysis/MEventRateCalc.cc:
     - added a comment

   * melectronics/MAnalogChannels.[h,cc]:
     - made the GetNum* unsigned
     - added new member functions to just initialize one size

   * mraw/MRawRunHeader.[h,cc]:
     - added a possibility to just init the number of pixels

   * msimcamera/MSimReadout.[h,cc]:
     - get the number of output channels from the camera geometry
     - initialize the runheader in ReInit
     - initialize the data arrays from the run-header in reinit

   * mimage/MHHillas.cc:
     - the default binning is not scales by 0.9 anymore

   * mmc/MMcEvtBasic.h:
     - added new type "artificial" 

   * mraw/MRawRunHeader.cc:
     - set header size in constructor to 0

   * msimcamera/MSimCalibrationSignal.[h,cc]:
     - we need fEvt and fTrigger always
     - renamed ReInit to CallReInit
     - set photon primary type
     - set number of photons from 50 to 5

   * msimcamera/MSimRandomPhotons.cc:
     - explicitly set weight to 1

   * mjobs/Makefile:
     - added msim, msimreflector, msimcamera and mcorsika



 2009/01/25 Thomas Bretz

   * mbase/Makefile, mbase/BaseLinkDef.h:
     - added MLut

   * mbase/MLut.[h,cc]:
     - added

   * msimcamera/MSimCamera.[h,cc], msimcamera/MSimTrigger.[h,cc],
     msimcamera/MSimRadout.[h,cc], msimcamera/SimCameraLinkDef.h,
     msimcamera/Makefile, msimcamera/MSimCalibrationSignal.[h,cc],
     msimcamera/SimCameraIncl,h:
     - added

   * mjobs/MJob.cc:
     - included TClass for newer root versions

   * mreflector/MRflEvtData.cc:
     - repaced a use of MHexagon by a direct use of MGeomCam

   * melectronics/MAvalanchePhotoDiode.[h,cc]:
     - added some getters
     - remobved some obsolete comment
     - set entries to 1 by default

   * mgeom/MGeomCam.[h,cc]:
     - split the Get[Max,Min]Radius into two member functions
     - added the HitDetector based on the maximum radius calculated

   * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
     - removed overloading of the new HitDetector

   * mgeom/MGeomPix.[h,cc]:
     - reset fUserBits in constructor according to a suggestion by valgrind
     - added GetT member function

   * mjobs/MJSpectrum.cc:
     - replaced some Form calls for sanity by MString::Format
     - check the result of CheckEnv

   * mjobs/MJStar.cc:
     - check the result of CheckEnv

   * mjobs/MJob.cc:
     - fixed a typo in the name for the seed value resource

   * mraw/MRawRunHeader.h:
     - added a getter for run type point run

   * msignal/MSignalCalc.cc:
     - don't execute Process at all if fPedestal==NULL

   * msignal/MSignalCam.cc:
     - aded case 10 and 11 to GetPixelContent

   * msim/MHPhotonEvent.cc:
     - replaced case 4 by using the traversal distance in the 0-pixel

   * msimcamera/MSimSignalCam.cc:
     - set pixel only to used if contents>0

   * msimcamera/MSimTrigger.[h,cc]:
     - added ReadEnv for setup from a resource file
     - compress the trigger list after deleting slots
     - initialize descriminator threshold with -1
     - check for the validity of the discr. th in PreProcess

   * msimreflector/MReflector.[h,cc]:
     - store file name in title
     - added ReadEnv for setup from a resource file

   * msimreflector/MSimReflector.[h,cc]:
     - changed copyright notice
     - added fDetectorMargin




 2009/01/24 Thomas Bretz

   * mbase/MMath.cc:
     - added two explicit conversion to make it compile on my Ubuntu
     - Replaced some Form by MString::Format
     - included MString



 2009/01/23 Daniela Dorner

   * datacenter/db/showplots-ds.php, datacenter/db/tabs.php, 
     datacenter/db/plot.php:
     - adapted path to new web file structure

   * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php:
     - added option to group by date (year, month, night): pulldown in
       menu and adapted query

   * datacenter/db/sequinfo-aio.php, datacenter/db/runinfo-aio.php
     datacenter/db/datasetinfo-aio.php:
     - enabled possibility to combine all group-bys 

   * datacenter/db/datasetinfo-aio.php:
     - enhances information printed in table in case of group-by

   * datacenter/db/include.php:
     - adapted pulldown of status-group-by

   * datacenter/db/menu.php:
     - added pulldown for sumtrigger-flag to sequinfo-menu
     - added function to print pulldown for group-by date



 2009/01/23 Thomas Bretz

   * mcorsika/MCorsikaEvtHeader.[h,cc], msim/MPhotonData.[h,cc],
     msimcamera/MSimExcessNoise.cc, msimreflector/MMirrorDisk.cc,
     msimreflector/MMirrorHex.cc, msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MReflector.cc, msimreflector/MSimReflector.cc,
     melectronics/MAnalogSignal.cc:
     - moved code which needs TMath to source file
     - included TMath for newer root versions
     - included TObjArray for newer root versions

   * msimcamera/MSimAPD.[h,cc], msimcamera/MSimBundlePhotons.[h,cc], 
     msimcamera/MSimRandomPhotons.[h,cc]:
     - added

   * melectronics/Makefile, melectronics/MAnalogChannels.[h,cc],
     melectronics/ElectronicsIncl.h, melectronics/ElectronicsLinkDef.h, 
     melectronics/MDigitalSignal.[h,cc],  
     melectronics/MAnalogSignal.[h,cc], 
     melectronics/MAvalanchePhotoDiode.[h,cc]:
     - added

   * msim/M*.cc, msimreflector/M*.cc, msimcamera/M*.cc:
     - changed copyright notice

   * mjobs/MJob.[h,cc]:
     - for convinience replaced GetEnvValue by GetEnvValue2
     - added initialization of the random number generator

   * ceres.cc, mcorsika/CorsikaIncl.h:
     - added



 2009/01/22 Thomas Bretz

   * mraw/MRawRunHeader.h:
     - added new functions to access the runtype

   * msim/MPhotonData.cc:
     - removed some obsolete comments

   * msim/MPhotonEvent.[h,cc]
     - added some comments
     - added new member function GetFirst and GetLast
     - UnSort the array after reading new data
     - removed some old obsolete code
     - added new meber function Sort and IsSorted

   * msimreflector/MSimReflector.cc:
     - force sorting of the array

  * msimcamera/MSimPSF.[h,cc], msimcamera/MSimGeomCam.[h,cc], 
    msimcamera/MSimExcessNoise.[h,cc], msimcamera/MSimSignalCam.[h,cc]:
    - added



 2009/01/21 Thomas Bretz

   * mbase/BaseLinkDef.h, mbase/Makefile:
     - added MQuaternion
     - added MReflection

   * mbase/MQuaternion.[h,cc], mbase/MReflection.[h,cc]:
     - added

   * mbase/MArrayI.[h,cc]:
     - added a few new functions (ReSort, Add, Find and AddUniq)

   * mbase/MMath.cc:
     - replaced delete by delete[] where appropriate

   * mgeom/MGeomCam.h:
     - added new virtual functions HitFrame and HitDetector
     - included MQuaternion

   * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomCamMagic.[h,cc]:
     - added new functions HitFrame and HitDetector:

   * msim/MHPhotonEvent.cc:
     - removed the reference to MCamera

   * mgeom/MGeomPix.[h,cc], mgui/MHexagon.[h,cc]:
     - moved DistanceToPrimitive from MHexagon to MGeomPix
     - moved the funtions to calculate overlapping areas 
       also, but they are still in a comment

   * mgui/MHexagon.[h,cc]:
     - started implementing a rotation angle
     - added data meber fPhi
     - increased class version number

   * mhist/MHCamera.cc, mtools/MagicJam.cc:
     - we don't have to use a MHexagon anymore caluclating 
       DistanceToPrimitive

   * msimreflector/MMirror.[h,cc], msimreflector/MMirrorSquare.[h,cc],
     msimreflector/MMirrorHex.[h,cc], msimreflector/MMirrorDisk.[h,cc],
     msimreflector/MReflector.[h,cc], msimreflector/MSimReflector.[h,cc],
     msimreflector/Makefile, msimreflector/SimReflectorLinkDef.h, 
     msimreflector/SimReflectorIncl.h:
     - added



 2009/01/21 Stefan Ruegamer

   * datacenter/scripts/read_lapalma-tapes:
     - added check of the tape slot when exporting the tapes



 2009/01/20 Thomas Bretz

   * mjobs/MJob.h:
     - added Esc member function

   * msim/MPhotonData.[h,cc], msim/MPhotonEvent.[h,cc], 
     msim/MSimAbsorption.[h,cc], msim/MSimPointingPos.[h,cc],
     MHPhotonEvent.[h,cc], msim/Makefile, msim/SimIncl.h 
     msim/SimLinkDef.h:
     - added


 2009/01/19 Thomas Bretz

   * mfileio/MWriteRootFile.cc:
     - simplified how the rules are evaluated using TPregexp
     - by this the rules got more powerful

   * mjobs/MJCalibrateSignal.cc, mjobs/MJStar.cc:
     - changed ols style rule to new style



 2009/01/18 Thomas Bretz

   * mbase/BaseLinkDef.h, mbase/Makefile:
     - added MSpline3

   * mcorsika/MCorsikaEvtHeader.cc:
     - some little cosmetics

   * mcorsika/MCorsikaEvtHeader.h:
     - added some missing getters

   * mcorsika/MCorsikaRunHeader.cc:
     - removed some obsolete comments
     - reordered some comments

   * mextralgo/MExtralgoSpline.h:
     - changed default in GetIntegral from true to false

   * mraw/MRawEvtHeader.h:
     - added Setter for DAQEventNumber

   * mraw/MRawRunHeader.cc:
     - start pixel hardware indices with 1 not with 0



 2009/01/17 Thomas Bretz

  * mbase/MMath.[h,cc]:
     - added a new function RndmExp which should be a tiny bit faster than
       root's own implementation because it ises Rndm() instead of Uniform()

   * mextralgo/ExtralgoIncl.h:
     - added MArrayF

   * mextralgo/MExtralgoSpline.[h,cc]:
     - divided FindY into FindYup and FindYdn to avoid an obsolete if-clause
     - added a new member function to return the integral function of the
       spline. This is useful to init a new spline and use it for 
       producing the proper random distribution.

   * mpedestal/MPedestalSubtractedEvt.[h,cc]:
     - added Print() function

   * mraw/MRawEvtData.[h,cc]:
     - added a member function to Reset the arrays
     - added member function to set the pixel indices
     - Improved the new Set function

  * readcorsika.cc:
    - added



 2009/01/16 Daniel Hoehne-Moench

   * datacenter/scripts/mcsequences:
     - implemented sumtrigger -> modes, fTriggerFlagKEY
     - fPriority(MCSequenceProcessStatus) is now filled into the mcdb

   * datacenter/scripts/fillmccallisto, fillmcstar:
     - bugfix: changed argument of $primaries from [$s+$s] to [$s]

   * datacenter/macros/fillcamera.C:
     - changed NumPheFromDNSB to float(7,3)
     - fPriority(MCRunProcessStatus) is now filled into the mcdb

   * datacenter/macros/fillmccalib.C:
     - minor changes, bugfix (wrong column name for mcdb)

   * datacenter/macros/fillmcsignal.C:
     - definition of some parameters changed according to fillsignal.C
     - minor changes, deleted unnecessary code
     - implemented if clause for HiLo-Parameters. Instead of 
       seqno<200000 the fAmplFadcKEY is queried in the mcdb for each
       sequence. For MUX MCs the HiLo-Parameters are not calculated.



 2009/01/15 Thomas Bretz

   * callisto.cc:
     - cosmetics to output

   * mcorsika/MCorsikaRunHeader.cc:
     - cosmetics (removed a ;;)

   * mhist/MHEvent.[h,cc]:
     - ReInit to allow the change of the camera geoemtry in ReInit



 2009/01/15 Stefan Ruegamer

   * datacenter/scripts/dodatacheck:
     - removed the _E in the find command; files from 2008/06/04 on do
       not have it any more



 2009/01/14 Daniel Hoehne-Moench

   * datacenter/scripts/sourcefile:
     - extended errorcoding on mc run process status

   * datacenter/scripts/runmccallisto, runmcstar:
     - deleted unnecessary lines, adapted to primary structure

   * datacenter/macros/fillmcsignal.C, fillmccalib.C, fillmcstar.C:
     - added

   * datacenter/scripts/fillmccallisto, fillmcstar:
     - added



 2009/01/14 Thomas Bretz

   * readraw.cc:
     - check first whether the file exist before adding the extension

   * mbase/MMath.[h,cc]:
     - added function to Re-sort an array

   * mfileio/MReadMarsFile.cc, mfileio/MWriteRootFile.cc:
     - Improved output

   * mfileio/MWriteRootFile.cc:
     - fixed a problem which prevented to open more than one /dev/null
       devices independantly

   * mgeom/MGeomCam.cc:
     - cosmetics

   * mgeom/MGeomCamDwarf.h:
     - fixed a typo in an ifdef

   * mgeom/MGeomPix.[h,cc]:
     - added funtion to return positon as TVector2
     - slightly improved the algorithm to check IsInside
     - fixed the conditional signs for the orientation of pixels
       in GetDirection

   * mmain/MEventDisplay.cc:
     - Give different names to the MPedestalSubtract tasks
     - fixed buttons
     - call AddGeometryTags after ReInit to allow reading new geometries in
       ReInit

   * mmc/MMcEvtBasic.h:
     - added a new primary type kNightSky

   * mraw/MRawEvtPixelIter.h:
     - replaced type of the number of bytes by UInt_t

   * mraw/MRawRunHeader.h:
     - allow to validate the magic-number from outside (for MCs)

   * datacenter/scripts/runcorsika:
     - added a lot of comments
     - reordered values in input card
     - switched off a lot of obsolete output
     - changed the Magnetic field to a value corresponding to the location of
       MAGIC at 2200m height valid for January 2009. (The old value never took
       place there?!) The value was taken from www.noaa.gov/geomagmodels



 2009/01/12 Daniel Hoehne-Moench

   * datacenter/db/menu.php:
     - bugfix: now the SumTriggerFlag is correctly displayed in the web
       interface



 2009/01/09 Daniel Hoehne-Moench

   * datacenter/macros/fillcamera.C
     - implemented new variables: zbinmin, zbinmax, number of 
       sumtriggers, sum trigger flag
     - bugfix: for P and C runs the mirror fraction and the impact
       parameter had unreasonable values (negative) which were filled
       into the mcdb, now->0

   * datacenter/scripts/fillcamera, mcsequences:
     - implemented call of getdbsetup



 2009/01/09 Stefan Ruegamer

   * datacenter/scripts/buildsequenceentries
     - corrected IFS argument



 2009/01/08 Stefan Ruegamer

   * datacenter/scripts/filesondisk
     - added S and N runs



 2009/01/07 Daniel Hoehne-Moench

   * datacenter/macros/filldotrun.C:
     - updated column counting numbers
     - included a check for the number of columns in the runfiles
   
   * datacenter/macros/buildsequenceentries.C:
     - implemented SumTriggerFlagKEY for sequence building



 2009/01/06 Thomas Bretz

   * mbase/MArrayB.h, mbase/MArrayD.h, mbase/MArrayF.h,
     mbase/MArrayI.h, mbase/MArrayS.h:
     - removed GetSize

   * mbase/MArrayF.h:
     - added Add()
     - added AddClipped

  * mbase/MMath.[h,cc]:
     - implemented ReSort

   * mcorsika/MCorsikaEvtHeader.cc:
     - removed obsolete comments

   * mcorsika/MCorsikaRead.cc:
     - cosmetics

   * mcorsika/MCorsikaRunHeader.[h,cc]:
     - added comments about file contents
     - added fWavelengthMin/Max

   * mextralgo/MExtralgoSpline.[h,cc]:
     - renamed SearchY to SearchYdn
     - fixed a problem in SearchYup (must be ++i instead of i++)
       (this is relatively unimportant because it was only used
        in the determination of the pulse width which we never
        really used)
     - added a sanity/range-check to SearchYup and SearchYdn
     - added a comment
     - changed the order of arguments in EvalDeriv1
     - changed the order of arguments in EvalDeriv2
     - accelerated EvalDeriv1 (one multiplication less)
     - added Deriv1 function 
     - made SearchYup and SearchYdn public

   * mjobs/MDataSet.cc:
     - removed an obsolete return statement

   * mraw/MRawEvtData.[h,cc]:
     - changed pointer in AddPixel to reference
     - added a Set function

   * mraw/MRawRunHeader.[h,cc]:
     - added a lot of fixes for wrong run numbers written by Arehucas
     - added a fix for strange file numbers written by Arehucas
     - added functions as monta carlo interface to set contents

   * msignal/MSignalCam.cc:
     - defined a case 9



 2009/01/05 Thomas Bretz

   * mhbase/MH.h:
     - commited missing changes from last year

   * merpp.cc:
     - fixed a description

   * sponde.cc:
     - added "Multiple dataset at once"

   * star.cc:
     - removed obsolete -ff option from output

   * mbase/MTime.[h,cc]:
     - added GetBinary
     - added WriteBinary

   * mbase/MEvtLoop.cc:
     - display paused status in status line
     - improved pause handling