source: trunk/Mars/callisto.cc@ 14199

Last change on this file since 14199 was 9518, checked in by tbretz, 15 years ago
*** empty log message ***
File size: 23.9 KB
Line 
1#include <TROOT.h>
2#include <TClass.h>
3#include <TSystem.h>
4#include <TGClient.h>
5#include <TApplication.h>
6#include <TObjectTable.h>
7
8#include "MLog.h"
9#include "MLogManip.h"
10
11#include "MEnv.h"
12#include "MArgs.h"
13#include "MArray.h"
14#include "MDirIter.h"
15
16#include "MStatusDisplay.h"
17
18#include "MSequence.h"
19#include "MJPedestal.h"
20#include "MJCalibration.h"
21#include "MJCalibrateSignal.h"
22#include "MJCalibTest.h"
23
24using namespace std;
25
26static void StartUpMessage()
27{
28 gLog << all << endl;
29
30 // 1 2 3 4 5
31 // 12345678901234567890123456789012345678901234567890
32 gLog << "========================================================" << endl;
33 gLog << " Callisto - MARS V" << MARSVER << endl;
34 gLog << " MARS -- CALibrate LIght Signals and Time Offsets" << endl;
35 gLog << " Compiled with ROOT v" << ROOT_RELEASE << " on <" << __DATE__ << ">" << endl;
36 gLog << "========================================================" << endl;
37 gLog << endl;
38}
39
40static void Usage()
41{
42 // 1 2 3 4 5 6 7 8
43 // 12345678901234567890123456789012345678901234567890123456789012345678901234567890
44 gLog << all << endl;
45 gLog << "Sorry the usage is:" << endl;
46 gLog << " callisto [-c] [-y] [options] sequence.txt|[tel:]number" << endl << endl;
47 gLog << " Arguments:" << endl;
48 gLog << " sequence.txt: ASCII file defining a sequence of runs" << endl;
49 gLog << " number: The sequence number (using file in the datacenter)" << endl;
50 gLog << " For more details see MSequence" << endl;
51 gLog << " Root Options:" << endl;
52 gLog << " -b Batch mode (no graphical output to screen)" << endl<<endl;
53 gLog << " Operation Modes:" << endl;
54 gLog << " -c Calculate the calibration constants" << endl;
55 gLog << " -y Extract and calibrate signal" << endl << endl;
56 gLog << " Data Type (exclusive):" << endl;
57 gLog << " -mc Input root-files are monte carlo files" << endl;
58 gLog << " Options:" << endl;
59 gLog.Usage();
60 gLog << " --debug-env=0 Disable debugging setting resources <default>" << endl;
61 gLog << " --debug-env[=1] Display untouched resources after program execution" << endl;
62 gLog << " --debug-env=2 Display untouched resources after eventloop setup" << endl;
63 gLog << " --debug-env=3 Debug setting resources from resource file and" << endl;
64 gLog << " command line" << endl;
65 gLog << " --debug-mem Debug memory usage" << endl << endl;
66 gLog << " --rc=Name:option Set or overwrite a resource of the resource file." << endl;
67 gLog << " (Note, that this option can be used multiple times." << endl;
68 gLog << endl;
69 gLog << " -q Quit when job is finished" << endl;
70 gLog << " -f Force overwrite of existing files" << endl;
71 gLog << " --ind=path Path where to search for the data files" << endl;
72 gLog << " [default=standard path in datacenter]" << endl;
73 gLog << " --iny=path Path where to search for the calibration files" << endl;
74 gLog << " [default=local path or output path of Mode-C]" << endl;
75 gLog << " --outc=path Path to write Mode-C result to [def=local path]" << endl;
76 gLog << " --outy=path Path to write Mode-Y result to [def=local path]" << endl;
77 gLog << " --out=path Path to write the all results to [def=local path]" << endl;
78 gLog << " (overwrites --outc and --outy)" << endl;
79 gLog << " --path=path Path to write the all results to [def=local path]" << endl;
80 gLog << " (overwrites --iny, --outc and --outy)" << endl;
81 gLog << " --dev-null Suppress output of Y-files (for test purpose)" << endl;
82 gLog << " --print-seq Print Sequence information" << endl;
83 gLog << " --print-files Print Files taken from Sequence" << endl;
84 gLog << " --print-found Print Files found from Sequence" << endl;
85// gLog << " --use-test Apply calibration constants to same calibration" << endl;
86// gLog << " file (for testing, calibration mode only)" << endl;
87 gLog << " --movie Write a movie in addition to Mode-Y (this might " << endl;
88 gLog << " stop the eventloop before all evts are processed)" << endl;
89 gLog << " --test Use this to calibrate the callibration files" << endl;
90 gLog << " instead of the data files (for test purposes)" << endl;
91// gLog << " --moon Force using pedestal fits instead of calculated RMS" << endl;
92 gLog << " --config=callisto.rc Resource file [default=callisto.rc]" << endl;
93 gLog << endl;
94 gLog << " --version, -V Show startup message with version number" << endl;
95 gLog << " -?, -h, --help This help" << endl << endl;
96 gLog << " Setup of the two jobs run by callisto (MJPedestal and MJCalibration)" << endl;
97 gLog << " can be done with the resource file. See MJPedestal and MJCalibration" << endl;
98 gLog << " especially CheckEnv() for more details. Command line options might" << endl;
99 gLog << " be overwritten by the resource file." << endl << endl;
100 gLog << " If running in Mode-C and Mode-Y --iny= is obsolete, instead --outc=" << endl;
101 gLog << " is used." << endl << endl;
102 gLog << " Using --iny=, --outc=, --outy=, --out= or --path= automatically" << endl;
103 gLog << " enables the corresponding modes. In this case -c/-y are obsolete." << endl << endl;
104 gLog << "Description:" << endl;
105 gLog << " callisto will calculate pedestals from pedestal-files defined in a" << endl;
106 gLog << " sequence-file. This pedestals are used to calculate the calibration" << endl;
107 gLog << " constants. These constants are stored in a so called calibration-file" << endl;
108 gLog << " together with some datacheck plots which can be viewed using either" << endl;
109 gLog << " showplot or MStatusDisplay in the interpreter. A description of a" << endl;
110 gLog << " sequence-file can be found in the class reference of MSequence." << endl << endl;
111 gLog << "Background:" << endl;
112 gLog << " Callisto is a large, icy, dark-colored, low-density outer moon of" << endl;
113 gLog << " Jupiter that is scarred with impact craters and ejecta. It has a" << endl;
114 gLog << " diameter of about 4800km, the second-largest moon of Jupiter; it is" << endl;
115 gLog << " roughly the size of Mercury. Callisto has the largest-known impact" << endl;
116 gLog << " crater in the Solar System, Valhalla, which has a bright patch 600km" << endl;
117 gLog << " across and rings that go out to almost 3000km. Callisto orbits" << endl;
118 gLog << " Jupiter at a mean distance of 1,883,000km. Its mass is 1.1e23 kg. It" << endl;
119 gLog << " takes Callisto 16.7 days to orbit Jupiter in a synchronous orbit." << endl;
120 gLog << " Jupiter's moon Callisto was discovered independently by Galileo and" << endl;
121 gLog << " S.Marius in 1610." << endl << endl;
122 gLog << "Example:" << endl;
123 gLog << " callisto -f --outc=mycal/ --outy=mysignal/ --log sequence02345.txt" << endl;
124 gLog << endl;
125}
126
127static void PrintFiles(const MSequence &seq, const TString &kInpathD, Bool_t showall)
128{
129 const char *prep = showall ? "Found" : "Scheduled";
130
131 MDirIter Next1, Next2, Next3;
132 seq.GetRuns(Next1, MSequence::kRawPed, kInpathD);
133 seq.GetRuns(Next2, MSequence::kRawCal, kInpathD);
134 seq.GetRuns(Next3, MSequence::kRawDat, kInpathD);
135
136 gLog << all;
137 gLog.Separator(Form("%s Pedestal Files", prep));
138 Next1.Print(showall?"all":"");
139 gLog << endl;
140 gLog.Separator(Form("%s Calibration Files", prep));
141 Next2.Print(showall?"all":"");
142 gLog << endl;
143 gLog.Separator(Form("%s Data Files", prep));
144 Next3.Print(showall?"all":"");
145 gLog << endl;
146}
147
148int main(int argc, char **argv)
149{
150 if (!MARS::CheckRootVer())
151 return 0xff;
152
153 MLog::RedirectErrorHandler(MLog::kColor);
154
155 //
156 // Evaluate arguments
157 //
158 MArgs arg(argc, argv);
159 gLog.Setup(arg);
160
161 StartUpMessage();
162
163 if (arg.HasOnly("-V") || arg.HasOnly("--version"))
164 return 0;
165
166 if (arg.HasOnly("-?") || arg.HasOnly("-h") || arg.HasOnly("--help"))
167 {
168 Usage();
169 return 2;
170 }
171
172 const TString kConfig = arg.GetStringAndRemove("--config=", "callisto.rc");
173
174 const Bool_t kPrintSeq = arg.HasOnlyAndRemove("--print-seq");
175 const Bool_t kPrintFiles = arg.HasOnlyAndRemove("--print-files");
176 const Bool_t kPrintFound = arg.HasOnlyAndRemove("--print-found");
177// const Bool_t kUseTest = arg.HasOnlyAndRemove("--use-test");
178 const Bool_t kMovie = arg.HasOnlyAndRemove("--movie");
179 const Bool_t kDebugMem = arg.HasOnlyAndRemove("--debug-mem");
180 const Bool_t kNullOut = arg.HasOnlyAndRemove("--dev-null");
181 const Bool_t kTestMode = arg.HasOnlyAndRemove("--test");
182// Bool_t kMoon = arg.HasOnlyAndRemove("--moon");
183 Int_t kDebugEnv = arg.HasOnlyAndRemove("--debug-env") ? 1 : 0;
184 kDebugEnv = arg.GetIntAndRemove("--debug-env=", kDebugEnv);
185
186 const Bool_t kQuit = arg.HasOnlyAndRemove("-q");
187 const Bool_t kBatch = arg.HasOnlyAndRemove("-b");
188 const Bool_t kOverwrite = arg.HasOnlyAndRemove("-f");
189 //const Bool_t kForceExec = arg.HasOnlyAndRemove("-ff");
190
191 const TString kInpathD = arg.GetStringAndRemove("--ind=", "");
192 TString kInpathY = arg.GetStringAndRemove("--iny=", "");
193 TString kOutpathY = arg.GetStringAndRemove("--outy=", "");
194 TString kOutpathC = arg.GetStringAndRemove("--outc=", "");
195 const TString kOutpath = arg.GetStringAndRemove("--out=", "");
196 const TString kPath = arg.GetStringAndRemove("--path=", "");
197
198 Bool_t kModeC = arg.HasOnlyAndRemove("-c");
199 Bool_t kModeY = arg.HasOnlyAndRemove("-y");
200 const Bool_t kIsMC = arg.HasOnlyAndRemove("-mc");
201
202 if (!kInpathY.IsNull() || !kOutpathY.IsNull() || !kOutpath.IsNull() || !kPath.IsNull())
203 kModeY = kTRUE;
204 if (!kOutpathC.IsNull() || !kOutpath.IsNull() || !kPath.IsNull())
205 kModeC = kTRUE;
206
207 //
208 // check for the right usage of the program (number of arguments)
209 //
210 if (arg.GetNumArguments()!=1)
211 {
212 gLog << warn << "WARNING - Wrong number of arguments..." << endl;
213 Usage();
214 return 2;
215 }
216
217 //
218 // Now we access/read the resource file. This will remove all
219 // --rc= from the list of arguments.
220 //
221 MEnv env(kConfig, "callisto.rc");
222 if (!env.IsValid())
223 {
224 gLog << err << "ERROR - Reading resource file " << kConfig << "." << endl;
225 return 0xfe;
226 }
227
228 // And move the resource options from the command line to the MEnv
229 if (!env.TakeEnv(arg, kDebugEnv>2))
230 return 0xfd;
231
232 //
233 // check for the right usage of the program (number of options)
234 //
235 if (arg.GetNumOptions()>0)
236 {
237 gLog << warn << "WARNING - Unknown commandline options..." << endl;
238 arg.Print("options");
239 gLog << endl;
240 return 2;
241 }
242
243 if (!kModeC && !kModeY /*&& !kUseTest*/)
244 {
245 gLog << err << "Neither calibration (-c), signal extraction (-y) or test-mode (--use-test)" << endl;
246 gLog << "specified! You can also give the operation mode by the options defining the" << endl;
247 gLog << "output path --outc, --outy or --out." << endl;
248 Usage();
249 return 2;
250 }
251 if (!kModeY && kMovie)
252 {
253 gLog << err << "Signal extraction mode (-y) not switched on but movie requested." << endl;
254 Usage();
255 return 2;
256 }
257
258 if ((kModeC/* || kUseTest*/) && kOutpathC.IsNull())
259 kOutpathC = ".";
260 if (kModeY)
261 {
262 if (kInpathY.IsNull())
263 kInpathY = ".";
264 if (kOutpathY.IsNull())
265 kOutpathY = ".";
266 }
267 if (!kOutpath.IsNull())
268 {
269 kOutpathC = kOutpath;
270 kOutpathY = kOutpath;
271 }
272 if (!kPath.IsNull())
273 {
274 kOutpathC = kOutpath;
275 kOutpathY = kOutpath;
276 kInpathY = kOutpath;
277 }
278
279 if (kModeC && kModeY)
280 kInpathY = kOutpathC;
281
282 //
283 // Setup sequence file and check for its existance
284 //
285 TString kSequence = arg.GetArgumentStr(0);
286
287 if (!MSequence::InflateSeq(kSequence, kIsMC))
288 return 3;
289
290 if (kDebugMem)
291 TObject::SetObjectStat(kTRUE);
292
293 //
294 // Setup sequence and check its validity
295 //
296 MSequence seq(kSequence, kInpathD);
297 if (!seq.IsMonteCarlo())
298 seq.SetMonteCarlo(kIsMC);
299 if (kPrintSeq)
300 {
301 gLog << all;
302 gLog.Separator(kSequence);
303 seq.Print();
304 gLog << endl;
305 }
306 if (!seq.IsValid())
307 {
308 gLog << err << "Sequence read but not valid!" << endl << endl;
309 return 5;
310 }
311
312 //
313 // Process print options
314 //
315 if (kPrintFiles)
316 PrintFiles(seq, kInpathD, kFALSE);
317 if (kPrintFound)
318 PrintFiles(seq, kInpathD, kTRUE);
319
320// if (seq.HasMoon())
321// kMoon = kTRUE;
322
323
324 /*
325 //
326 // Check for existance of all files
327 //
328 MDirIter iter;
329 const Int_t n0 = seq.SetupAllRuns(iter, kInpathD, "[DPC]");
330 const Int_t n1 = seq.GetNumAllRuns();
331 if (n0 != n1)
332 {
333 if (kForceExec)
334 gLog << warn << "WARNING";
335 else
336 gLog << err << "ERROR";
337 gLog << " - " << n1 << " files in sequence defined, but " << n0 << " found in ";
338 gLog << (kInpathD.IsNull() ? "<defaultpath>" : kInpathD.Data()) << endl;
339 if (!kForceExec)
340 return 2;
341 }
342
343 if (kPrintOnly)
344 return 0;
345 */
346 //
347 // Initialize root
348 //
349 MArray::Class()->IgnoreTObjectStreamer();
350 MParContainer::Class()->IgnoreTObjectStreamer();
351
352 // FIXME: Remove all non-root arguments and options from argc, argv
353
354 TApplication app("callisto", &argc, argv);
355 if ((!gROOT->IsBatch() && !gClient) || (gROOT->IsBatch() && !kBatch))
356 {
357 gLog << err << "Bombing... maybe your DISPLAY variable is not set correctly!" << endl;
358 return 1;
359 }
360
361 //
362 // Update frequency by default = 1Hz
363 //
364 MStatusDisplay *d = new MStatusDisplay;
365
366 // From now on each 'Exit' means: Terminate the application
367 d->SetBit(MStatusDisplay::kExitLoopOnExit);
368 d->SetTitle(Form("-- Callisto: %s --", kSequence.Data()));
369
370 if (kModeC/* || kUseTest*/)
371 {
372 //
373 // Calculate pedestal for pedestal-calculation and calibration
374 //
375 MJPedestal job1(Form("MJPedestalC1 #%d", seq.GetSequence()));
376 job1.SetNoStorage();
377 job1.SetSequence(seq);
378 job1.SetEnv(&env);
379 job1.SetEnvDebug(kDebugEnv);
380 job1.SetDisplay(d);
381 job1.SetOverwrite(kOverwrite);
382// job1.SetUseHists(kMoon);
383
384
385 job1.SetExtractionFundamental();
386 // job1.SetPathOut(kOutpathC); // not yet needed
387 // job1.SetPathIn(kInpathC); // DO NOT CALL IT. IT WOULD READ THE XEXTRACTOR FROM calib-file
388
389 if (!job1.Process())
390 {
391 gLog << err << "Calculation of pedestal failed." << endl << endl;
392 return 6;
393 }
394
395 if (!job1.GetDisplay())
396 {
397 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
398 return 1;
399 }
400
401 //
402 // Calculate pedestal and pedestal resolution
403 //
404 MJPedestal job2(Form("MJPedestalC2 #%d", seq.GetSequence()));
405 job2.SetNoStorage();
406 job2.SetSequence(seq);
407 job2.SetEnv(&env);
408 job2.SetEnvDebug(kDebugEnv);
409 job2.SetDisplay(d);;
410 job2.SetOverwrite(kOverwrite);
411// job2.SetUseHists(kMoon);
412 job2.SetDeadPixelCheck();
413 // job1.SetPathOut(kOutpathC); // not yet needed
414 // job1.SetPathIn(kInpathC); // DO NOT CALL IT. IT WOULD READ THE XEXTRACTOR FROM calib-file
415
416 //job2.SetExtractorResolution();
417 job2.SetExtractionWithExtractorRndm();
418 job2.SetExtractor(job1.GetExtractor());
419 job2.SetPedestals(job1.GetPedestalCam());
420 job2.SetBadPixels(job1.GetBadPixels());
421
422 // Please check the Changelog of 2005/04/20 about further deatils of the next comment
423 //if (job1.GetExtractor().InheritsFrom("MExtractTimeAndCharge"))
424 if (!job2.Process())
425 {
426 gLog << err << "Calculation of pedestal resolution failed." << endl << endl;
427 return 7;
428 }
429
430 if (!job2.GetDisplay())
431 {
432 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
433 return 1;
434 }
435
436 //
437 // Do calibration
438 //
439 MJCalibration job3(Form("MJCalibration #%d", seq.GetSequence()));
440 job3.SetSequence(seq);
441 job3.SetEnv(&env);
442 job3.SetEnvDebug(kDebugEnv);
443 job3.SetDisplay(d);
444 job3.SetOverwrite(kOverwrite);
445 job3.SetPathOut(kOutpathC);
446 job3.SetCommandLine(MArgs::GetCommandLine(argc, argv));
447 // job2.SetPathIn(kInpathC); // not yet needed
448
449 job3.SetBadPixels(job2.GetBadPixels());
450 job3.SetExtractor(job2.GetExtractor());
451 job3.SetExtractorCam(job2.GetPedestalCam());
452
453 if (!job3.Process(job1.GetPedestalCam()))
454 {
455 gLog << err << "Calculation of calibration failed." << endl << endl;
456 return 8;
457 }
458
459 if (kDebugEnv>0)
460 env.PrintUntouched();
461
462 if (!job3.GetDisplay())
463 {
464 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
465 return 1;
466 }
467/*
468 if (kUseTest)
469 {
470 MJCalibTest job4(Form("MJCalibTest #%d", seq.GetSequence()));
471 job4.SetBadPixels(job2.GetBadPixels());
472 job4.SetSequence(seq);
473 job4.SetEnv(&env);
474 job4.SetEnvDebug(kDebugEnv);
475 job4.SetDisplay(d);;
476 job4.SetOverwrite(kOverwrite);
477 job4.SetPathOut(kOutpathC);
478
479 if (!job4.Process(job1.GetPedestalCam()))
480 {
481 gLog << err << "Calibration of calibration failed." << endl << endl;
482 return 9;
483 }
484
485 if (kDebugEnv>0)
486 env.PrintUntouched();
487
488 if (!job4.GetDisplay())
489 {
490 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
491 return 1;
492 }
493 }*/
494 }
495
496 if (kModeY)
497 {
498 d->Reset();
499
500 //
501 // Calculate starting pedestal for data extraction
502 //
503 MJPedestal job1(Form("MJPedestalY1 #%d", seq.GetSequence()));
504 job1.SetNoStorage();
505 job1.SetSequence(seq);
506 job1.SetEnv(&env);
507 job1.SetEnvDebug(kDebugEnv);
508 job1.SetDisplay(d);
509 job1.SetNoDisplay();
510 job1.SetOverwrite(kOverwrite);
511 job1.SetPathIn(kInpathY); // --> READ Extractor from calib-file
512 //job1.SetPathOut(kOutpathY); // not yet needed
513 job1.SetUseData();
514 job1.SetExtractionFundamental();
515
516 if (!job1.Process())
517 {
518 gLog << err << "Calculation of fundamental pedestal failed." << endl << endl;
519 return 10;
520 }
521
522 if (!job1.GetDisplay())
523 {
524 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
525 return 1;
526 }
527
528 //
529 // Calculate pedestal and pedestal resolution
530 //
531 MJPedestal job2(Form("MJPedestalY2 #%d", seq.GetSequence()));
532 job2.SetNoStorage(kMovie);
533 job2.SetSequence(seq);
534 job2.SetEnv(&env);
535 job2.SetEnvDebug(kDebugEnv);
536 job2.SetDisplay(d);
537 job2.SetNoDisplay();
538 job2.SetOverwrite(kOverwrite);
539 job2.SetPathIn(kInpathY);
540 job2.SetPulsePosCheck(!seq.IsMonteCarlo());
541 job2.SetPathOut(kOutpathY); // for updating the extractor
542
543 job2.SetUseData();
544 job2.SetExtractionWithExtractorRndm();
545 job2.SetExtractor(job1.GetExtractor());
546 job2.SetPedestals(job1.GetPedestalCam());
547 job2.SetBadPixels(job1.GetBadPixels());
548// job2.SetUseHists(kMoon);
549
550 // Please check the Changelog of 2005/04/20 about further deatils of the next comment
551 //if (job1.GetExtractor().InheritsFrom("MExtractTimeAndCharge"))
552 const Int_t rc = job2.Process();
553 if (rc<=0)
554 {
555 // rc==0: Error
556 // rc==-1: too much to the left
557 // rc==-2: too much to the right
558 // rc==-3: too much to the right (beyond limits)
559
560 gLog << err << "Calculation of pedestal from extractor (random) failed." << endl << endl;
561
562 //error coding for the automatic analysis (to be filled into the database)
563 switch (rc)
564 {
565 case 0:
566 return 11;
567 case -1:
568 return 12;
569 case -2:
570 return 13;
571 case -3:
572 return 14;
573 }
574 return 2;
575 }
576
577 if (!job2.GetDisplay())
578 {
579 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
580 return 1;
581 }
582
583 //
584 // Calculate pedestal and pedestal resolution
585 //
586 MJPedestal job3(Form("MJPedestalY3 #%d", seq.GetSequence()));
587 job3.SetNoStorage();
588 job3.SetSequence(seq);
589 job3.SetEnv(&env);
590 job3.SetEnvDebug(kDebugEnv);
591 job3.SetDisplay(d);
592 job3.SetNoDisplay();
593 job3.SetOverwrite(kOverwrite);
594 job3.SetPathIn(kInpathY);
595 // job1.SetPathOut(kOutpathC); // not yet needed
596 // job1.SetPathIn(kInpathC); // not yet needed
597
598 job3.SetUseData();
599 job3.SetExtractionWithExtractor();
600 job3.SetExtractor(job2.GetExtractor());
601 job3.SetPedestals(job1.GetPedestalCam());
602 job3.SetBadPixels(job1.GetBadPixels());
603// job3.SetUseHists(kMoon);
604
605 if (!job3.Process())
606 {
607 gLog << err << "Calculation of pedestal from extractor failed." << endl << endl;
608 return 15;
609 }
610
611 if (!job3.GetDisplay())
612 {
613 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
614 return 1;
615 }
616
617 //
618 // Extract signal and calibrate it
619 //
620 MJCalibrateSignal job4(Form("MJCalibrateSignal #%d", seq.GetSequence()));
621 job4.SetSequence(seq);
622 job4.SetDisplay(d);;
623 job4.SetEnv(&env);
624 job4.SetEnvDebug(kDebugEnv);
625 job4.SetOverwrite(kOverwrite);
626 job4.SetPathIn(kInpathY);
627 job4.SetPathOut(kOutpathY);
628 job4.SetMovieMode(kMovie);
629 job4.SetNullOut(kNullOut);
630 job4.SetCommandLine(MArgs::GetCommandLine(argc, argv));
631 job4.SetTestMode(kTestMode);
632 if (!seq.IsMonteCarlo())
633 job4.SetExtractor(job2.GetExtractor());
634
635 // Where to search for calibration files
636 if (!job4.Process(job1.GetPedestalCam(), job3.GetPedestalCam(), job2.GetPedestalCam()))
637 return 16;
638
639 if (kDebugEnv>0)
640 env.PrintUntouched();
641
642 if (!job4.GetDisplay())
643 {
644 gLog << warn << "Display closed by user... execution aborted." << endl << endl;
645 return 1;
646 }
647 }
648
649 if (kBatch || kQuit)
650 delete d;
651 else
652 {
653 // From now on each 'Close' means: Terminate the application
654 d->SetBit(MStatusDisplay::kExitLoopOnClose);
655
656 // Wait until the user decides to exit the application
657 app.Run(kFALSE);
658 }
659
660 if (TObject::GetObjectStat())
661 {
662 TObject::SetObjectStat(kFALSE);
663 gObjectTable->Print();
664 }
665
666 return 0;
667}
668
Note: See TracBrowser for help on using the repository browser.