Context Navigation

source: trunk/Mars/mjobs/MJSimulation.cc@ 18271

Visit:

Last change on this file since 18271 was 18158, checked in by ftemme, 10 years ago
Added an additional photon acceptance to the simulation.
File size: 36.1 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2009 <mailto:tbretz@astro.uni-wuerzburg.de>
19	!
20	! Copyright: MAGIC Software Development, 2000-2009
21	!
22	!
23	\* ======================================================================== */
24
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJSimulation
28	//
29	//
30	// Force reading a corsika file even if the footer (RUNE-section) is missing
31	// by setting fForceMode to kTRUE or from the resource file by
32	//
33	// ForceMode: Yes
34	//
35	//
36	// To switch off the simulation of the camera electronics, use:
37	//
38	// Camera: Off
39	//
40	// Note, that the border of the camera and the propertied of the cones
41	// are still simulated (simply because it is fast). Furthermore, this
42	// switches off the trigger for the output, i.e. all data which deposits
43	// at least one photon in at least one pixel is written to the output file.
44	//
45	//
46	// In case of a pedestal or calibration run the artificial trigger can
47	// be "switched off" and the cosmics trrigger "switched on" by setting
48	// fForceTrigger to kTRUE or from the resource file by
49	//
50	// ForceTrigger: Yes
51	//
52	//
53	/////////////////////////////////////////////////////////////////////////////
54	#include "MJSimulation.h"
55
56	#include <TEnv.h>
57	#include <TCanvas.h>
58
59	// Core
60	#include "MLog.h"
61	#include "MLogManip.h"
62
63	#include "MArgs.h"
64	#include "MDirIter.h"
65	#include "MParList.h"
66	#include "MTaskList.h"
67	#include "MEvtLoop.h"
68
69	#include "MStatusDisplay.h"
70
71	// Tasks
72	#include "MCorsikaRead.h"
73	#include "MContinue.h"
74	#include "MFillH.h"
75	#include "MGeomApply.h"
76	#include "MParameterCalc.h"
77	#include "MHillasCalc.h"
78	#include "MImgCleanStd.h"
79	#include "MWriteRootFile.h"
80	#include "MWriteFitsFile.h"
81
82	#include "MSimMMCS.h"
83	#include "MSimAbsorption.h"
84	#include "MSimAtmosphere.h"
85	#include "MSimReflector.h"
86	#include "MSimPointingPos.h"
87	#include "MSimPSF.h"
88	#include "MSimGeomCam.h"
89	#include "MSimSignalCam.h"
90	#include "MSimAPD.h"
91	#include "MSimExcessNoise.h"
92	#include "MSimCamera.h"
93	#include "MSimTrigger.h"
94	#include "MSimReadout.h"
95	#include "MSimRandomPhotons.h"
96	#include "MSimBundlePhotons.h"
97	#include "MSimCalibrationSignal.h"
98
99	// Histograms
100	#include "MBinning.h"
101
102	#include "MHn.h"
103	#include "MHCamera.h"
104	#include "MHCamEvent.h"
105	#include "MHPhotonEvent.h"
106
107	// Container
108	#include "MRawRunHeader.h"
109	#include "MParameters.h"
110	#include "MReflector.h"
111	#include "MParEnv.h"
112	#include "MSpline3.h"
113	#include "MParSpline.h"
114	#include "MGeomCam.h"
115	#include "MMatrix.h"
116
117	#include "MPedestalCam.h"
118	#include "MPedestalPix.h"
119
120	ClassImp(MJSimulation);
121
122	using namespace std;
123
124	// --------------------------------------------------------------------------
125	//
126	// Default constructor.
127	//
128	// Sets fRuns to 0, fExtractor to NULL, fDataCheck to kFALSE
129	//
130	MJSimulation::MJSimulation(const char name, const char title)
131	: fForceMode(kFALSE), fCamera(kTRUE), fForceTrigger(kFALSE),
132	fWriteFitsFile(kFALSE), fOperationMode(kModeData), fRunNumber(-1)
133	{
134	fName = name ? name : "MJSimulation";
135	fTitle = title ? title : "Standard analysis and reconstruction";
136	}
137
138	Bool_t MJSimulation::CheckEnvLocal()
139	{
140	fForceMode = GetEnv("ForceMode", fForceMode);
141	fForceTrigger = GetEnv("ForceTrigger", fForceTrigger);
142	fCamera = GetEnv("Camera", fCamera);
143
144	return kTRUE;
145	}
146	/*
147	TString MJSimulation::GetOutFile(const MSequence &seq) const
148	{
149	return seq.IsValid() ? Form("ceres%08d.root", seq.GetSequence()) : "ceres.root";
150	}
151	*/
152
153	Bool_t MJSimulation::WriteResult(const MParList &plist, const MSequence &seq, Int_t num)
154	{
155	if (fPathOut.IsNull())
156	{
157	*fLog << inf << "No output path specified via SetPathOut - no output written." << endl;
158	return kTRUE;
159	}
160
161	TObjArray cont;
162	cont.Add(const_cast<TEnv*>(GetEnv()));
163	if (seq.IsValid())
164	cont.Add(const_cast<MSequence*>(&seq));
165
166	cont.Add(plist.FindObject("PulseShape"));
167	cont.Add(plist.FindObject("Reflector"));
168	cont.Add(plist.FindObject("MGeomCam"));
169	cont.Add(plist.FindObject("GeomCones"));
170
171	TNamed cmdline("CommandLine", fCommandLine.Data());
172	cont.Add(&cmdline);
173
174	if (fDisplay)
175	{
176	TString title = "-- Ceres";
177	if (seq.IsValid())
178	{
179	title += ": ";
180	title += seq.GetSequence();
181	}
182	title += " --";
183	fDisplay->SetTitle("Ceres", kFALSE);
184
185	cont.Add(fDisplay);
186	}
187
188	const TString name = Form("ceres%08d.root", num);
189	return WriteContainer(cont, name, "RECREATE");
190	}
191
192	void MJSimulation::SetupHist(MHn &hist) const
193	{
194	hist.AddHist("MCorsikaEvtHeader.fTotalEnergy");
195	hist.InitName("Energy");
196	hist.InitTitle("Energy;E [GeV]");
197	hist.SetLog(kTRUE, kTRUE, kFALSE);
198
199	hist.AddHist("MPhotonEvent.GetNumExternal");
200	hist.InitName("Size");
201	hist.InitTitle("Size;S [#]");
202	hist.SetLog(kTRUE, kTRUE, kFALSE);
203
204	/*
205	hist.AddHist("-MCorsikaEvtHeader.fX/100","-MCorsikaEvtHeader.fY/100");
206	hist.SetDrawOption("colz");
207	hist.InitName("Impact;Impact;Impact");
208	hist.InitTitle("Impact;West <--> East [m];South <--> North [m]");
209	hist.SetAutoRange();
210	*/
211
212	hist.AddHist("MCorsikaEvtHeader.GetImpact/100");
213	hist.InitName("Impact");
214	hist.InitTitle("Impact;Impact [m]");
215	hist.SetAutoRange();
216
217	hist.AddHist("MCorsikaEvtHeader.fFirstInteractionHeight/100000");
218	hist.InitName("Height");
219	hist.InitTitle("FirstInteractionHeight;h [km]");
220
221	hist.AddHist("(MCorsikaEvtHeader.fAz+MCorsikaRunHeader.fMagneticFieldAz)TMath::RadToDeg()", "MCorsikaEvtHeader.fZdTMath::RadToDeg()");
222	hist.InitName("SkyOrigin;Az;Zd");
223	hist.InitTitle("Sky Origin;Az [\\circ];Zd [\\circ]");
224	hist.SetDrawOption("colz");
225	hist.SetAutoRange();
226
227	hist.AddHist("IncidentAngle.fVal");
228	hist.InitName("ViewCone");
229	hist.InitTitle("Incident Angle;\\alpha [\\circ]");
230	}
231
232	template<class T>
233	void MJSimulation::SetupCommonFileStructure(T &write) const
234	{
235	// Common run headers
236	write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE, 1);
237	write.AddContainer("MCorsikaRunHeader", "RunHeaders", kFALSE, 1);
238	write.AddContainer("MRawRunHeader", "RunHeaders", kTRUE, 1);
239	write.AddContainer("MGeomCam", "RunHeaders", kTRUE, 1);
240	write.AddContainer("MMcRunHeader", "RunHeaders", kTRUE, 1);
241
242	// Common events
243	write.AddContainer("MCorsikaEvtHeader", "Events", kFALSE);
244	write.AddContainer("MRawEvtHeader", "Events");
245	write.AddContainer("MMcEvt", "Events", kFALSE);
246	write.AddContainer("MMcEvtBasic", "Events", kFALSE);
247	write.AddContainer("IncidentAngle", "Events", kFALSE);
248	write.AddContainer("MPointingPos", "Events", kFALSE);
249	}
250
251	void MJSimulation::SetupHeaderKeys(MWriteFitsFile &write,MRawRunHeader &header) const
252	{
253	const MTime now(-1);
254	write.SetHeaderKey("ISMC",true,"Bool if File is Montecarlo File");
255	write.SetHeaderKey("TELESCOP", "FACT", "");
256	write.SetHeaderKey("PACKAGE", "MARS Cheobs", "");
257	write.SetHeaderKey("VERSION", "1.0", "");
258	write.SetHeaderKey("CREATOR", "Ceres", "");
259	write.SetHeaderKey("EXTREL", 1., "");
260	write.SetHeaderKey("COMPILED", __DATE__" " __TIME__, "");
261	write.SetHeaderKey("REVISION", "0", "");
262	write.SetHeaderKey("ORIGIN", "FACT", "");
263	write.SetHeaderKey("DATE", now.GetStringFmt("%Y-%m-%dT%H:%M:%S").Data(), "");
264	write.SetHeaderKey("NIGHT", now.GetNightAsInt(), "");
265	write.SetHeaderKey("TIMESYS", "UTC", "");
266	write.SetHeaderKey("TIMEUNIT", "d", "");
267	write.SetHeaderKey("MJDREF", 40587, "");
268	//write.SetHeaderKey("BLDVER", 1, "");
269	write.SetHeaderKey("RUNID", header.GetRunNumber(), "");
270	write.SetHeaderKey("NBOARD", 40, "");
271	write.SetHeaderKey("NPIX", header.GetNumPixel(), "");
272	write.SetHeaderKey("NROI", header.GetNumSamplesHiGain(), "");
273	write.SetHeaderKey("NROITM", 0, "");
274	write.SetHeaderKey("TMSHIFT", 0, "");
275	write.SetHeaderKey("CAMERA", "MGeomCamFACT", "");
276	write.SetHeaderKey("DAQ", "DRS4", "");
277
278	// FTemme: ADCRANGE and ADC have to be calculated, using the values for
279	// the fadctype.
280	// write.SetHeaderKey("ADCRANGE", 2000, "Dynamic range in mV");
281	// write.SetHeaderKey("ADC", 12, "Resolution in bits");
282
283	switch(header.GetRunType())
284	{
285	case MRawRunHeader::kRTData\|MRawRunHeader::kRTMonteCarlo:
286	write.SetHeaderKey("RUNTYPE", "data", "");
287	break;
288	case MRawRunHeader::kRTPedestal\|MRawRunHeader::kRTMonteCarlo:
289	write.SetHeaderKey("RUNTYPE", "pedestal", "");
290	break;
291	case MRawRunHeader::kRTCalibration\|MRawRunHeader::kRTMonteCarlo:
292	write.SetHeaderKey("RUNTYPE", "calibration", "");
293	break;
294	}
295	// write.SetHeaderKey("ID", 777, "Board 0: Board ID");
296	// write.SetHeaderKey("FMVER", 532, "Board 0: Firmware Version");
297	// write.SetHeaderKey("DNA", "0", "");
298	// write.SetHeaderKey("BOARD", 0, "");
299	// write.SetHeaderKey("PRESC", 40, "");
300	// write.SetHeaderKey("PHASE", 0, "");
301	// write.SetHeaderKey("DAC0", 26500, "");
302	// write.SetHeaderKey("DAC1", 0, "");
303	// write.SetHeaderKey("DAC2", 0, "");
304	// write.SetHeaderKey("DAC3", 0, "");
305	// write.SetHeaderKey("DAC4", 28800, "");
306	// write.SetHeaderKey("DAC5", 28800, "");
307	// write.SetHeaderKey("DAC6", 28800, "");
308	// write.SetHeaderKey("DAC7", 28800, "");
309	write.SetHeaderKey("REFCLK", header.GetFreqSampling(), "");
310	write.SetHeaderKey("DRSCALIB", false, "");
311	// write.SetHeaderKey("TSTARTI", 0, "");
312	// write.SetHeaderKey("TSTARTF", 0., "");
313	// write.SetHeaderKey("TSTOPI", 0, "");
314	// write.SetHeaderKey("TSTOPF", 0., "");
315	// write.SetHeaderKey("DATE-OBS", "1970-01-01T00:00:00", "");
316	// write.SetHeaderKey("DATE-END", "1970-01-01T00:00:00", "");
317	// write.SetHeaderKey("NTRG", 0, "");
318	// write.SetHeaderKey("NTRGPED", 0, "");
319	// write.SetHeaderKey("NTRGLPE", 0, "");
320	// write.SetHeaderKey("NTRGTIM", 0, "");
321	// write.SetHeaderKey("NTRGLPI", 0, "");
322	// write.SetHeaderKey("NTRGEXT1", 0, "");
323	// write.SetHeaderKey("NTRGEXT2", 0, "");
324	// write.SetHeaderKey("NTRGMISC", 0, "");
325	}
326
327	void MJSimulation::SetupVetoColumns(MWriteFitsFile &write) const
328	{
329	write.VetoColumn("MParameterD.fVal");
330	write.VetoColumn("MRawEvtData.fLoGainPixId");
331	write.VetoColumn("MRawEvtData.fLoGainFadcSamples");
332	write.VetoColumn("MRawEvtData.fABFlags");
333	write.VetoColumn("MRawEvtHeader.fNumTrigLvl2");
334	//write.VetoColumn("MRawEvtHeader.fTrigPattern");
335	write.VetoColumn("MRawEvtHeader.fNumLoGainOn");
336	}
337
338	Bool_t MJSimulation::Process(const MArgs &args, const MSequence &seq)
339	{
340	*fLog << inf;
341	fLog->Separator(GetDescriptor());
342
343	if (!CheckEnv())
344	return kFALSE;
345
346	if (seq.IsValid())
347	*fLog << fSequence.GetFileName() << endl;
348	else
349	*fLog << "Input: " << args.GetNumArguments() << "-files" << endl;
350	*fLog << endl;
351
352	MDirIter iter;
353	if (seq.IsValid() && seq.GetRuns(iter, MSequence::kCorsika)<=0)
354	{
355	*fLog << err << "ERROR - Sequence valid but without files." << endl;
356	return kFALSE;
357	}
358
359	// --------------------------------------------------------------------------------
360	// Setup Parlist
361	MParList plist;
362	plist.AddToList(this); // take care of fDisplay!
363	// setup TaskList
364	MTaskList tasks;
365	plist.AddToList(&tasks);
366	// --------------------------------------------------------------------------------
367
368	// FIXME: Allow empty GeomCones!
369	MParEnv env0("Reflector");
370	MParEnv env1("GeomCones");
371	MParEnv env2("MGeomCam");
372	env0.SetClassName("MReflector");
373	env1.SetClassName("MGeomCam");
374	env2.SetClassName("MGeomCam");
375	plist.AddToList(&env0);
376	plist.AddToList(&env1);
377	plist.AddToList(&env2);
378
379	plist.FindCreateObj("MPedPhotCam", "MPedPhotFromExtractorRndm");
380
381	MParSpline shape("PulseShape");
382	plist.AddToList(&shape);
383
384	// * FIXME * FIXME * FIXME *
385	plist.FindCreateObj("MMcRunHeader");
386
387	MRawRunHeader header;
388	header.SetValidMagicNumber();
389	//header.InitFadcType(3);
390
391	switch (fOperationMode)
392	{
393	case kModeData:
394	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTData);
395	header.SetRunInfo(0, fRunNumber<0 ? 3 : fRunNumber);
396	break;
397
398	case kModePed:
399	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPedestal);
400	header.SetSourceInfo("Pedestal");
401	header.SetRunInfo(0, fRunNumber<0 ? 1 : fRunNumber);
402	break;
403
404	case kModeCal:
405	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTCalibration);
406	header.SetSourceInfo("Calibration");
407	header.SetRunInfo(0, fRunNumber<0 ? 2 : fRunNumber);
408	break;
409
410	case kModePointRun:
411	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPointRun);
412	header.SetRunInfo(0, fRunNumber<0 ? 0 : fRunNumber);
413	break;
414	}
415
416	// FIXME: Move to MSimPointingPos, MSimCalibrationSignal
417	// Can we use this as input for MSimPointingPos?
418	header.SetObservation("On", "MonteCarlo");
419	plist.AddToList(&header);
420
421	MCorsikaRead read;
422	read.SetForceMode(fForceMode);
423
424	if (!seq.IsValid())
425	{
426	for (int i=0; i<args.GetNumArguments(); i++)
427	read.AddFile(args.GetArgumentStr(i));
428	}
429	else
430	read.AddFiles(iter);
431
432	MContinue precut("", "PreCut");
433	precut.IsInverted();
434	precut.SetAllowEmpty();
435
436	MSimMMCS simmmcs;
437
438	MParSpline splinepde("PhotonDetectionEfficiency");
439	MParSpline splinemirror("MirrorReflectivity");
440	MParSpline splinecones("ConesAngularAcceptance");
441	MParSpline splinecones2("ConesTransmission");
442	MParSpline splineAdditionalPhotonAcceptance("AdditionalPhotonAcceptance");
443	plist.AddToList(&splinepde);
444	plist.AddToList(&splinemirror);
445	plist.AddToList(&splinecones);
446	plist.AddToList(&splinecones2);
447	plist.AddToList(&splineAdditionalPhotonAcceptance);
448
449	const TString sin2 = "sin(MCorsikaEvtHeader.fZd)sin(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
450	const TString cos2 = "cos(MCorsikaEvtHeader.fZd)cos(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
451	const TString cos = "cos(MCorsikaEvtHeader.fAz-MCorsikaRunHeader.fAzMin*TMath::DegToRad())";
452
453	const TString form = "acos("+sin2+""+cos+"+"+cos2+")TMath::RadToDeg()";
454
455	MParameterCalc calcangle(form, "CalcIncidentAngle");
456	calcangle.SetNameParameter("IncidentAngle");
457
458	MSimAtmosphere simatm;
459	MSimAbsorption absapd("SimPhotonDetectionEfficiency");
460	MSimAbsorption absmir("SimMirrorReflectivity");
461	MSimAbsorption cones("SimConesAngularAcceptance");
462	MSimAbsorption cones2("SimConesTransmission");
463	MSimAbsorption additionalPhotonAcceptance("SimAdditionalPhotonAcceptance");
464	absapd.SetParName("PhotonDetectionEfficiency");
465	absmir.SetParName("MirrorReflectivity");
466	cones.SetParName("ConesAngularAcceptance");
467	cones.SetUseTheta();
468	cones2.SetParName("ConesTransmission");
469	additionalPhotonAcceptance.SetParName("AdditionalPhotonAcceptance");
470
471	MSimPointingPos pointing;
472
473	MSimReflector reflect;
474	reflect.SetNameGeomCam("GeomCones");
475	reflect.SetNameReflector("Reflector");
476	// MSimStarField stars;
477
478	MContinue cont1("MPhotonEvent.GetNumPhotons<1", "ContEmpty1");
479	MContinue cont2("MPhotonEvent.GetNumPhotons<1", "ContEmpty2");
480	MContinue cont3("MPhotonEvent.GetNumPhotons<2", "ContEmpty3");
481	cont1.SetAllowEmpty();
482	cont2.SetAllowEmpty();
483	cont3.SetAllowEmpty();
484
485	// -------------------------------------------------------------------
486
487	MBinning binse( 120, 1, 1000000, "BinningEnergy", "log");
488	MBinning binsth( 60, 0.9, 900000, "BinningThreshold", "log");
489	MBinning binsee( 36, 0.9, 900000, "BinningEnergyEst", "log");
490	MBinning binss( 100, 1, 10000000, "BinningSize", "log");
491	// MBinning binsi( 100, -500, 500, "BinningImpact");
492	MBinning binsi( 32, 0, 800, "BinningImpact");
493	MBinning binsh( 150, 0, 50, "BinningHeight");
494	MBinning binsaz(720, -360, 360, "BinningAz");
495	MBinning binszd( 70, 0, 70, "BinningZd");
496	MBinning binsvc( 35, 0, 7, "BinningViewCone");
497	MBinning binsel(150, 0, 50, "BinningTotLength");
498	MBinning binsew(150, 0, 15, "BinningMedLength");
499	MBinning binsd("BinningDistC");
500	MBinning binsd0("BinningDist");
501	MBinning binstr("BinningTrigPos");
502
503	plist.AddToList(&binsee);
504	plist.AddToList(&binse);
505	plist.AddToList(&binsth);
506	plist.AddToList(&binss);
507	plist.AddToList(&binsi);
508	plist.AddToList(&binsh);
509	plist.AddToList(&binszd);
510	plist.AddToList(&binsaz);
511	plist.AddToList(&binsvc);
512	plist.AddToList(&binsel);
513	plist.AddToList(&binsew);
514	plist.AddToList(&binstr);
515	plist.AddToList(&binsd);
516	plist.AddToList(&binsd0);
517
518	MHn mhn1, mhn2, mhn3, mhn4;
519	SetupHist(mhn1);
520	SetupHist(mhn2);
521	SetupHist(mhn3);
522	SetupHist(mhn4);
523
524	MH3 mhtp("TriggerPos.fVal-IntendedPulsePos.fVal-PulseShape.GetWidth");
525	mhtp.SetName("TrigPos");
526	mhtp.SetTitle("Trigger position w.r.t. the first photon hitting a detector");
527
528	MH3 mhew("MPhotonStatistics.fLength");
529	mhew.SetName("TotLength");
530	mhew.SetTitle("Time between first and last photon hitting a detector;L [ns]");
531
532	MH3 mhed("MPhotonStatistics.fTimeMedDev");
533	mhed.SetName("MedLength");
534	mhed.SetTitle("Median deviation (1\\sigma);L [ns]");
535
536	MFillH fillh1(&mhn1, "", "FillCorsika");
537	MFillH fillh2(&mhn2, "", "FillH2");
538	MFillH fillh3(&mhn3, "", "FillH3");
539	MFillH fillh4(&mhn4, "", "FillH4");
540	MFillH filltp(&mhtp, "", "FillTriggerPos");
541	MFillH fillew(&mhew, "", "FillEvtWidth");
542	MFillH filled(&mhed, "", "FillMedDev");
543	fillh1.SetNameTab("Corsika", "Distribution as simulated by Corsika");
544	fillh2.SetNameTab("Detectable", "Distribution of events hit the detector");
545	fillh3.SetNameTab("Triggered", "Distribution of triggered events");
546	fillh4.SetNameTab("Cleaned", "Distribution after cleaning and cuts");
547	filltp.SetNameTab("TrigPos", "TriggerPosition w.r.t the first photon");
548	fillew.SetNameTab("EvtWidth", "Time between first and last photon hitting a detector");
549	filled.SetNameTab("MedDev", "Median deviation of arrival time of photons hitting a detector");
550
551	MHPhotonEvent planeG(1, "HPhotonEventGround"); // Get from MaxImpact
552	MHPhotonEvent plane0(2, "HMirrorPlane0"); // Get from MReflector
553	//MHPhotonEvent plane1(2, "HMirrorPlane1");
554	MHPhotonEvent plane2(2, "HMirrorPlane2");
555	MHPhotonEvent plane3(2, "HMirrorPlane3");
556	MHPhotonEvent plane4(2, "HMirrorPlane4");
557	MHPhotonEvent planeF1(6, "HPhotonEventCamera"); // Get from MGeomCam
558	MHPhotonEvent planeF2(header.IsPointRun()?4:6, "HPhotonEventCones"); // Get from MGeomCam
559
560	plist.AddToList(&planeG);
561	plist.AddToList(&plane0);
562	plist.AddToList(&plane2);
563	plist.AddToList(&plane3);
564	plist.AddToList(&plane4);
565	plist.AddToList(&planeF1);
566	plist.AddToList(&planeF2);;
567
568	//MHPSF psf;
569
570	MFillH fillG(&planeG, "MPhotonEvent", "FillGround");
571	MFillH fill0(&plane0, "MirrorPlane0", "FillReflector");
572	//MFillH fill1(&plane1, "MirrorPlane1", "FillCamShadow");
573	MFillH fill2(&plane2, "MirrorPlane2", "FillCandidates");
574	MFillH fill3(&plane3, "MirrorPlane3", "FillReflected");
575	MFillH fill4(&plane4, "MirrorPlane4", "FillFocal");
576	MFillH fillF1(&planeF1, "MPhotonEvent", "FillCamera");
577	MFillH fillF2(&planeF2, "MPhotonEvent", "FillCones");
578	//MFillH fillP(&psf, "MPhotonEvent", "FillPSF");
579
580	fillG.SetNameTab("Ground", "Photon distribution at ground");
581	fill0.SetNameTab("Reflector", "Photon distribution at reflector plane w/o camera shadow");
582	//fill1.SetNameTab("CamShadow", "Photon distribution at reflector plane w/ camera shadow");
583	fill2.SetNameTab("Candidates", "Can hit photon distribution at reflector plane w/ camera shadow");
584	fill3.SetNameTab("Reflected", "Photon distribution after reflector projected to reflector plane");
585	fill4.SetNameTab("Focal", "Photon distribution at focal plane");
586	fillF1.SetNameTab("Camera", "Photon distribution which hit the detector");
587	fillF2.SetNameTab("Cones", "Photon distribution after cones");
588	//fillP.SetNameTab("PSF", "Photon distribution after cones for all mirrors");
589
590	// -------------------------------------------------------------------
591
592	if (!fFileOut.IsNull())
593	{
594	const Ssiz_t dot = fFileOut.Last('.');
595	const Ssiz_t slash = fFileOut.Last('/');
596	if (dot>slash)
597	fFileOut = fFileOut.Remove(dot);
598	}
599
600	// -------------------------------------------------------------------
601
602	const char *fmt = fFileOut.IsNull() ?
603	Form("s/cer([0-9]+)([0-9][0-9][0-9])/%s\\/%08d.$2%%s_MonteCarlo$1.root/", Esc(fPathOut).Data(), header.GetRunNumber()) :
604	Form("%s/%s%%s.root", Esc(fPathOut).Data(), Esc(fFileOut).Data());
605
606	const TString rule1(Form(fmt, fFileOut.IsNull()?"_R":""));
607	const TString rule2(Form(fmt, "_Y"));
608	const TString rule4(Form(fmt, "_I"));
609	TString rule3(Form(fmt, Form("_%c", header.GetRunTypeChar())));
610
611	MWriteRootFile write4a( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
612	MWriteRootFile write4b( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
613	MWriteRootFile write3b( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
614	MWriteRootFile write2a( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
615	MWriteRootFile write2b( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
616	MWriteRootFile write1a( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
617	MWriteRootFile write1b( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
618
619	if (fWriteFitsFile)
620	rule3.ReplaceAll(".root", ".fits");
621
622	MWriteFitsFile write3af( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
623	MWriteRootFile write3ar( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
624
625	MTask &write3a = fWriteFitsFile ? static_cast<MTask&>(write3af) : static_cast<MTask&>(write3ar);
626
627	//SetupHeaderKeys(write3af,header);
628	SetupVetoColumns(write3af);
629
630	write3af.SetBytesPerSample("Data", 2);
631
632	write1a.SetName("WriteRefData");
633	write1b.SetName("WriteRefMC");
634	write2a.SetName("WriteSigData");
635	write2b.SetName("WriteSigMC");
636	write3a.SetName("WriteCamData");
637	write3b.SetName("WriteCamMC");
638	write4a.SetName("WriteImgData");
639	write4b.SetName("WriteImgMC");
640
641	SetupCommonFileStructure(write1a);
642	SetupCommonFileStructure(write2a);
643	SetupCommonFileStructure(write3ar);
644	SetupCommonFileStructure(write3af);
645	SetupCommonFileStructure(write4a);
646
647	// R: Dedicated file structure
648	write1a.AddContainer("MPhotonEvent", "Events");
649
650	// Y: Dedicated file structure
651	write2a.AddContainer("MPedPhotFromExtractorRndm", "RunHeaders", kTRUE, 1); // FIXME: Needed for the signal files to be display in MARS
652	write2a.AddContainer("MSignalCam", "Events");
653
654	// D: Dedicated file structure
655	write3af.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
656	write3af.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
657	write3af.AddContainer("ResidualTimeSpread", "RunHeaders", kTRUE, 1);
658	write3af.AddContainer("MRawEvtData", "Events");
659	write3af.AddContainer("MTruePhotonsPerPixelCont", "Events");
660	write3af.AddContainer("MPhotonEvent","Events");
661
662	write3ar.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
663	write3ar.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
664	write3ar.AddContainer("MRawEvtData", "Events");
665	// It doesn't make much sene to write this information
666	// to the file because the units are internal units not
667	// related to the output samples
668	// if (header.IsDataRun() \|\| fForceTrigger)
669	// write3a.AddContainer("TriggerPos", "Events");
670
671	// I: Dedicated file structure
672	write4a.AddContainer("MHillas", "Events");
673	write4a.AddContainer("MHillasSrc", "Events");
674	write4a.AddContainer("MImagePar", "Events");
675	write4a.AddContainer("MNewImagePar", "Events");
676
677	// Basic MC data
678	write1b.AddContainer("MMcEvtBasic", "OriginalMC");
679	write2b.AddContainer("MMcEvtBasic", "OriginalMC");
680	write3b.AddContainer("MMcEvtBasic", "OriginalMC");
681	write4b.AddContainer("MMcEvtBasic", "OriginalMC");
682
683	// -------------------------------------------------------------------
684
685	MGeomApply apply;
686
687	MSimPSF simpsf;
688
689	MSimGeomCam simgeom;
690	simgeom.SetNameGeomCam("GeomCones");
691
692	MSimCalibrationSignal simcal;
693	simcal.SetNameGeomCam("GeomCones");
694
695	// Sky Quality Meter: 21.82M = 2.02e-4cd/m^2
696	// 1cd = 12.566 lm / 4pi sr
697
698	// FIXME: Simulate photons before cones and QE!
699
700	MSimRandomPhotons simnsb;
701	simnsb.SetFreq(5.8, 0.004); // ph/m^2/nm/sr/ns NSB, 4MHz dark count rate
702	simnsb.SetNameGeomCam("GeomCones");
703
704	// FIXME: How do we handle star-light? We need the rate but we also
705	// need to process it through the mirror!
706
707	MSimAPD simapd;
708	simapd.SetNameGeomCam("GeomCones");
709
710	MSimExcessNoise simexcnoise;
711	MSimBundlePhotons simsum;
712	MSimSignalCam simsignal;
713	MSimCamera simcam;
714	MSimTrigger simtrig;
715	MSimReadout simdaq;
716
717	MContinue conttrig("TriggerPos.fVal<0", "ContTrigger");
718
719	MParameterD pulpos("IntendedPulsePos");
720	// FIXME: Set a default which could be 1/3 of the digitization window
721	// pulpos.SetVal(40); // [ns]
722	plist.AddToList(&pulpos);
723
724	MParameterD trigger("TriggerPos");
725	trigger.SetVal(0);
726	plist.AddToList(&trigger);
727
728	// -------------------------------------------------------------------
729	// Dominik and Sebastian on: fix time offsets
730	MMatrix fix_time_offsets_between_pixels_in_ns(
731	"MFixTimeOffset","titel"
732	);
733	plist.AddToList(&fix_time_offsets_between_pixels_in_ns);
734
735	// -------------------------------------------------------------------
736
737	// Jens Buss on: residual time spread
738	MParameterD resTimeSpread("ResidualTimeSpread");
739	resTimeSpread.SetVal(0.0);
740	plist.AddToList(&resTimeSpread);
741
742	// -------------------------------------------------------------------
743
744	// Remove isolated pixels
745	MImgCleanStd clean(0, 0);
746	//clean.SetCleanLvl0(0); // The level above which isolated pixels are kept
747	clean.SetCleanRings(0);
748	clean.SetMethod(MImgCleanStd::kAbsolute);
749
750	//clean.SetNamePedPhotCam("MPedPhotFromExtractorRndm");
751
752	MHillasCalc hcalc;
753	hcalc.Disable(MHillasCalc::kCalcConc);
754
755	MHCamEvent evt0a(/10/3, "Signal", "Average signal (absolute);;S [ph]");
756	MHCamEvent evt0c(/10/3, "MaxSignal", "Maximum signal (absolute);;S [ph]");
757	MHCamEvent evt0d(/11/8, "ArrTm", "Time after first photon;;T [ns]");
758	evt0a.SetErrorSpread(kFALSE);
759	evt0c.SetCollectMax();
760
761	MContinue cut("", "Cut");
762
763	MFillH fillx0a(&evt0a, "MSignalCam", "FillAvgSignal");
764	MFillH fillx0c(&evt0c, "MSignalCam", "FillMaxSignal");
765	MFillH fillx0d(&evt0d, "MSignalCam", "FillArrTm");
766	MFillH fillx1("MHHillas", "MHillas", "FillHillas");
767	MFillH fillx3("MHHillasSrc", "MHillasSrc", "FillHillasSrc");
768	MFillH fillx4("MHNewImagePar", "MNewImagePar", "FillNewImagePar");
769	MFillH fillth("MHThreshold", "", "FillThreshold");
770	MFillH fillca("MHCollectionArea", "", "FillTrigArea");
771
772	fillth.SetNameTab("Threshold");
773	fillca.SetNameTab("TrigArea");
774
775	// -------------------------------------------------------------------
776
777	if (header.IsDataRun())
778	{
779	tasks.AddToList(&read);
780	tasks.AddToList(&precut);
781	tasks.AddToList(&pointing);
782	tasks.AddToList(&simmmcs);
783	if (!fPathOut.IsNull() && !HasNullOut())
784	{
785	//tasks.AddToList(&write1b);
786	tasks.AddToList(&write2b);
787	if (fCamera)
788	tasks.AddToList(&write3b);
789	if (header.IsDataRun())
790	tasks.AddToList(&write4b);
791	}
792	// if (header.IsPointRun())
793	// tasks.AddToList(&stars);
794	if (1)
795	tasks.AddToList(&simatm); // Here because before fillh1
796	tasks.AddToList(&calcangle);
797	tasks.AddToList(&fillh1);
798	tasks.AddToList(&fillG);
799	if (!header.IsPointRun())
800	{
801	tasks.AddToList(&absapd);
802	tasks.AddToList(&absmir);
803	tasks.AddToList(&additionalPhotonAcceptance);
804	if (0)
805	tasks.AddToList(&simatm); // FASTER?
806	}
807	tasks.AddToList(&reflect);
808	if (!header.IsPointRun())
809	{
810	tasks.AddToList(&fill0);
811	//tasks.AddToList(&fill1);
812	tasks.AddToList(&fill2);
813	tasks.AddToList(&fill3);
814	tasks.AddToList(&fill4);
815	tasks.AddToList(&fillF1);
816	}
817	tasks.AddToList(&cones);
818	tasks.AddToList(&cones2);
819	//if (header.IsPointRun())
820	// tasks.AddToList(&fillP);
821	tasks.AddToList(&cont1);
822	}
823	// -------------------------------
824	tasks.AddToList(&apply);
825	if (header.IsDataRun())
826	{
827	tasks.AddToList(&simpsf);
828	tasks.AddToList(&simgeom);
829	tasks.AddToList(&cont2);
830	if (!header.IsPointRun())
831	{
832	tasks.AddToList(&fillF2);
833	tasks.AddToList(&fillh2);
834	}
835	tasks.AddToList(&cont3);
836	}
837	if (fCamera)
838	{
839	if (header.IsPedestalRun() \|\| header.IsCalibrationRun())
840	tasks.AddToList(&simcal);
841	tasks.AddToList(&simnsb);
842	tasks.AddToList(&simapd);
843	tasks.AddToList(&simexcnoise);
844	}
845	tasks.AddToList(&simsum);
846	if (fCamera)
847	{
848	tasks.AddToList(&simcam);
849	if (header.IsDataRun() \|\| fForceTrigger)
850	tasks.AddToList(&simtrig);
851	tasks.AddToList(&conttrig);
852	tasks.AddToList(&simdaq);
853	}
854	tasks.AddToList(&simsignal); // What do we do if signal<0?
855	if (!fPathOut.IsNull() && !HasNullOut())
856	{
857	//tasks.AddToList(&write1a);
858	if (!header.IsPedestalRun())
859	tasks.AddToList(&write2a);
860	if (fCamera)
861	tasks.AddToList(&write3a);
862	}
863	// -------------------------------
864	if (fCamera)
865	{
866	// FIXME: MHCollectionArea Trigger Area!
867	if (header.IsDataRun())
868	tasks.AddToList(&fillh3);
869	tasks.AddToList(&filltp);
870	}
871	if (header.IsDataRun())
872	{
873	tasks.AddToList(&fillew);
874	tasks.AddToList(&filled);
875	}
876	if (!header.IsPedestalRun())
877	{
878	tasks.AddToList(&fillx0a);
879	tasks.AddToList(&fillx0c);
880	}
881	if (header.IsDataRun())
882	{
883	tasks.AddToList(&clean);
884	tasks.AddToList(&hcalc);
885	tasks.AddToList(&cut);
886	tasks.AddToList(&fillx0d);
887	tasks.AddToList(&fillx1);
888	//tasks.AddToList(&fillx2);
889	tasks.AddToList(&fillx3);
890	tasks.AddToList(&fillx4);
891	if (!HasNullOut())
892	tasks.AddToList(&write4a);
893	//tasks.AddToList(&fillx5);
894
895	tasks.AddToList(&fillh4);
896	tasks.AddToList(&fillth);
897	tasks.AddToList(&fillca);
898	}
899	//-------------------------------------------
900
901	tasks.SetAccelerator(MTask::kAccDontReset\|MTask::kAccDontTime);
902
903	// Create and setup the eventloop
904	MEvtLoop evtloop(fName);
905	evtloop.SetParList(&plist);
906	evtloop.SetDisplay(fDisplay);
907	evtloop.SetLogStream(&gLog);
908	if (!SetupEnv(evtloop))
909	return kFALSE;
910
911	// FIXME: If pedestal file given use the values from this file
912	//-------------------------------------------
913
914	MGeomCam cam = static_cast<MGeomCam>(env2.GetCont());
915
916	if (binstr.IsDefault())
917	binstr.SetEdgesLin(150, -shape.GetWidth(),
918	header.GetFreqSampling()/1000.*header.GetNumSamples()+shape.GetWidth());
919
920	if (binsd.IsDefault() && cam)
921	binsd.SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
922
923	if (binsd0.IsDefault() && cam)
924	binsd0.SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
925
926
927	header.Print();
928
929	// FIXME: Display acceptance curves!
930
931	if (fDisplay)
932	{
933	TCanvas &c = fDisplay->AddTab("Info");
934	c.Divide(2,2);
935
936	c.cd(1);
937	gPad->SetBorderMode(0);
938	gPad->SetFrameBorderMode(0);
939	gPad->SetGridx();
940	gPad->SetGridy();
941	gROOT->SetSelectedPad(0);
942	shape.DrawClone()->SetBit(kCanDelete);
943
944	if (env0.GetCont() && (header.IsDataRun() \|\| header.IsPointRun()))
945	{
946	c.cd(3);
947	gPad->SetBorderMode(0);
948	gPad->SetFrameBorderMode(0);
949	gPad->SetGridx();
950	gPad->SetGridy();
951	gROOT->SetSelectedPad(0);
952	static_cast<MReflector*>(env0.GetCont())->DrawClone("line")->SetBit(kCanDelete);
953	}
954
955	if (fCamera)
956	{
957	if (env1.GetCont())
958	{
959	c.cd(2);
960	gPad->SetBorderMode(0);
961	gPad->SetFrameBorderMode(0);
962	gPad->SetGridx();
963	gPad->SetGridy();
964	gROOT->SetSelectedPad(0);
965	MHCamera c = new MHCamera(static_cast<MGeomCam&>(env1.GetCont()));
966	c->SetStats(kFALSE);
967	c->SetBit(MHCamera::kNoLegend);
968	c->SetBit(kCanDelete);
969	c->Draw();
970	}
971
972	if (cam)
973	{
974	c.cd(4);
975	gPad->SetBorderMode(0);
976	gPad->SetFrameBorderMode(0);
977	gPad->SetGridx();
978	gPad->SetGridy();
979	gROOT->SetSelectedPad(0);
980	MHCamera c = new MHCamera(cam);
981	c->SetStats(kFALSE);
982	c->SetBit(MHCamera::kNoLegend);
983	c->SetBit(kCanDelete);
984	c->Draw();
985	}
986	}
987
988	TCanvas &d = fDisplay->AddTab("Info2");
989	d.Divide(2,3);
990
991	d.cd(1);
992	gPad->SetBorderMode(0);
993	gPad->SetFrameBorderMode(0);
994	gPad->SetGridx();
995	gPad->SetGridy();
996	gROOT->SetSelectedPad(0);
997	splinepde.DrawClone()->SetBit(kCanDelete);
998
999	d.cd(3);
1000	gPad->SetBorderMode(0);
1001	gPad->SetFrameBorderMode(0);
1002	gPad->SetGridx();
1003	gPad->SetGridy();
1004	gROOT->SetSelectedPad(0);
1005	splinecones2.DrawClone()->SetBit(kCanDelete);
1006
1007	d.cd(5);
1008	gPad->SetBorderMode(0);
1009	gPad->SetFrameBorderMode(0);
1010	gPad->SetGridx();
1011	gPad->SetGridy();
1012	gROOT->SetSelectedPad(0);
1013	splinemirror.DrawClone()->SetBit(kCanDelete);
1014
1015	d.cd(2);
1016	gPad->SetBorderMode(0);
1017	gPad->SetFrameBorderMode(0);
1018	gPad->SetGridx();
1019	gPad->SetGridy();
1020	gROOT->SetSelectedPad(0);
1021	splinecones.DrawClone()->SetBit(kCanDelete);
1022	//splinecones2.DrawClone("same")->SetBit(kCanDelete);
1023
1024	d.cd(6);
1025	gPad->SetBorderMode(0);
1026	gPad->SetFrameBorderMode(0);
1027	gPad->SetGridx();
1028	gPad->SetGridy();
1029	gROOT->SetSelectedPad(0);
1030	MParSpline all = (MParSpline)splinepde.DrawClone();
1031	//all->SetTitle("Combined acceptance");
1032	all->SetBit(kCanDelete);
1033	if (splinemirror.GetSpline())
1034	all->Multiply(*splinemirror.GetSpline());
1035	if (splinecones2.GetSpline())
1036	all->Multiply(*splinecones2.GetSpline());
1037	}
1038
1039	//-------------------------------------------
1040
1041	// Execute first analysis
1042	if (!evtloop.Eventloop(fMaxEvents))
1043	{
1044	gLog << err << GetDescriptor() << ": Failed." << endl;
1045	return kFALSE;
1046	}
1047
1048	//-------------------------------------------
1049	// FIXME: Display Spline in tab
1050	// FIXME: Display Reflector in tab
1051	// FIXME: Display Routing(?) in tab
1052	// FIXME: Display Camera(s) in tab
1053	//-------------------------------------------
1054
1055	if (!WriteResult(plist, seq, header.GetRunNumber()))
1056	return kFALSE;
1057
1058	*fLog << all << GetDescriptor() << ": Done." << endl << endl << endl;;
1059
1060	return kTRUE;
1061	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: