Context Navigation

source: trunk/Mars/mjobs/MJSimulation.cc@ 19723

Visit:

Last change on this file since 19723 was 19723, checked in by tbretz, 5 years ago
Do not write MMc* when writing MC calibration files.
File size: 49.3 KB

Line
1	/* ======================================================================== *\
2	!
3	! *
4	! * This file is part of MARS, the MAGIC Analysis and Reconstruction
5	! * Software. It is distributed to you in the hope that it can be a useful
6	! * and timesaving tool in analysing Data of imaging Cerenkov telescopes.
7	! * It is distributed WITHOUT ANY WARRANTY.
8	! *
9	! * Permission to use, copy, modify and distribute this software and its
10	! * documentation for any purpose is hereby granted without fee,
11	! * provided that the above copyright notice appear in all copies and
12	! * that both that copyright notice and this permission notice appear
13	! * in supporting documentation. It is provided "as is" without express
14	! * or implied warranty.
15	! *
16	!
17	!
18	! Author(s): Thomas Bretz, 1/2009 <mailto:tbretz@astro.uni-wuerzburg.de>
19	!
20	! Copyright: MAGIC Software Development, 2000-2009
21	!
22	!
23	\* ======================================================================== */
24
25	/////////////////////////////////////////////////////////////////////////////
26	//
27	// MJSimulation
28	//
29	//
30	// Force reading a corsika file even if the footer (RUNE-section) is missing
31	// by setting fForceMode to kTRUE or from the resource file by
32	//
33	// ForceMode: Yes
34	//
35	//
36	// To switch off the simulation of the camera electronics, use:
37	//
38	// Camera: Off
39	//
40	// Note, that the border of the camera and the propertied of the cones
41	// are still simulated (simply because it is fast). Furthermore, this
42	// switches off the trigger for the output, i.e. all data which deposits
43	// at least one photon in at least one pixel is written to the output file.
44	//
45	//
46	// In case of a pedestal or calibration run the artificial trigger can
47	// be "switched off" and the cosmics trrigger "switched on" by setting
48	// fForceTrigger to kTRUE or from the resource file by
49	//
50	// ForceTrigger: Yes
51	//
52	//
53	/////////////////////////////////////////////////////////////////////////////
54	#include "MJSimulation.h"
55
56	#include <TEnv.h>
57	#include <TCanvas.h>
58	#include <iostream>
59
60	// Core
61	#include "MLog.h"
62	#include "MLogManip.h"
63
64	#include "MArgs.h"
65	#include "MDirIter.h"
66	#include "MParList.h"
67	#include "MTaskList.h"
68	#include "MEvtLoop.h"
69
70	#include "MStatusDisplay.h"
71
72	// Tasks
73	#include "MCorsikaRead.h"
74	#include "MContinue.h"
75	#include "MFillH.h"
76	#include "MGeomApply.h"
77	#include "MParameterCalc.h"
78	#include "MSrcPosCalc.h"
79	#include "MHillasCalc.h"
80	#include "MImgCleanStd.h"
81	#include "MWriteRootFile.h"
82	#include "MWriteFitsFile.h"
83
84	#include "MSimMMCS.h"
85	#include "MSimAbsorption.h"
86	#include "MSimAtmosphere.h"
87	#include "MSimReflector.h"
88	#include "MSimPointingPos.h"
89	#include "MSimPSF.h"
90	#include "MSimGeomCam.h"
91	#include "MSimSignalCam.h"
92	#include "MSimAPD.h"
93	#include "MSimExcessNoise.h"
94	#include "MSimCamera.h"
95	#include "MSimTrigger.h"
96	#include "MSimReadout.h"
97	#include "MSimRandomPhotons.h"
98	#include "MSimBundlePhotons.h"
99	#include "MSimCalibrationSignal.h"
100
101	// Histograms
102	#include "MBinning.h"
103
104	#include "MHn.h"
105	#include "MHCamera.h"
106	#include "MHCamEvent.h"
107	#include "MHPhotonEvent.h"
108
109	// Container
110	#include "MRawRunHeader.h"
111	#include "MParameters.h"
112	#include "MReflector.h"
113	#include "MParEnv.h"
114	#include "MSpline3.h"
115	#include "MParSpline.h"
116	#include "MGeomCam.h"
117	#include "MPedestalCam.h"
118	#include "MPedestalPix.h"
119
120	ClassImp(MJSimulation);
121
122	using namespace std;
123
124	// --------------------------------------------------------------------------
125	//
126	// Default constructor.
127	//
128	// Sets fRuns to 0, fExtractor to NULL, fDataCheck to kFALSE
129	//
130	MJSimulation::MJSimulation(const char name, const char title)
131	: fForceMode(kFALSE), fCamera(kTRUE), fForceTrigger(kFALSE),
132	fWriteFitsFile(kFALSE), fOperationMode(kModeData), fRunNumber(-1)
133	{
134	fName = name ? name : "MJSimulation";
135	fTitle = title ? title : "Standard analysis and reconstruction";
136	}
137
138	Bool_t MJSimulation::CheckEnvLocal()
139	{
140	fForceMode = GetEnv("ForceMode", fForceMode);
141	fForceTrigger = GetEnv("ForceTrigger", fForceTrigger);
142	fCamera = GetEnv("Camera", fCamera);
143
144	return kTRUE;
145	}
146
147	Bool_t MJSimulation::WriteResult(const MParList &plist, const MSequence &seq, Int_t num)
148	{
149	if (fPathOut.IsNull())
150	{
151	*fLog << inf << "No output path specified via SetPathOut - no output written." << endl;
152	return kTRUE;
153	}
154
155	TObjArray cont;
156	cont.Add(const_cast<TEnv*>(GetEnv()));
157	if (seq.IsValid())
158	cont.Add(const_cast<MSequence*>(&seq));
159
160	cont.Add(plist.FindObject("PulseShape"));
161	cont.Add(plist.FindObject("Reflector"));
162	cont.Add(plist.FindObject("MGeomCam"));
163	cont.Add(plist.FindObject("GeomCones"));
164
165	TNamed cmdline("CommandLine", fCommandLine.Data());
166	cont.Add(&cmdline);
167
168	if (fDisplay)
169	{
170	TString title = "-- Ceres";
171	if (seq.IsValid())
172	{
173	title += ": ";
174	title += seq.GetSequence();
175	}
176	title += " --";
177	fDisplay->SetTitle("Ceres", kFALSE);
178
179	cont.Add(fDisplay);
180	}
181
182	const TString name = Form("ceres%08d.root", num);
183	return WriteContainer(cont, name, "RECREATE");
184	}
185
186	void MJSimulation::SetupHist(MHn &hist) const
187	{
188	hist.AddHist("MCorsikaEvtHeader.fTotalEnergy");
189	hist.InitName("Energy");
190	hist.InitTitle("Energy;E [GeV]");
191	hist.SetLog(kTRUE, kTRUE, kFALSE);
192
193	hist.AddHist("MPhotonEvent.GetNumExternal");
194	hist.InitName("Size");
195	hist.InitTitle("Size;S [#]");
196	hist.SetLog(kTRUE, kTRUE, kFALSE);
197
198	/*
199	hist.AddHist("-MCorsikaEvtHeader.fX/100","-MCorsikaEvtHeader.fY/100");
200	hist.SetDrawOption("colz");
201	hist.InitName("Impact;Impact;Impact");
202	hist.InitTitle("Impact;West <--> East [m];South <--> North [m]");
203	hist.SetAutoRange();
204	*/
205
206	hist.AddHist("MCorsikaEvtHeader.GetImpact/100");
207	hist.InitName("Impact");
208	hist.InitTitle("Impact;Impact [m]");
209	hist.SetAutoRange();
210
211	hist.AddHist("MCorsikaEvtHeader.fFirstInteractionHeight/100000");
212	hist.InitName("Height");
213	hist.InitTitle("FirstInteractionHeight;h [km]");
214
215	hist.AddHist("(MCorsikaEvtHeader.fAz+MCorsikaRunHeader.fMagneticFieldAz)TMath::RadToDeg()", "MCorsikaEvtHeader.fZdTMath::RadToDeg()");
216	hist.InitName("SkyOrigin;Az;Zd");
217	hist.InitTitle("Sky Origin;Az [#circ];Zd [#circ]");
218	hist.SetDrawOption("colz");
219	hist.SetAutoRange();
220
221	hist.AddHist("IncidentAngle.fVal");
222	hist.InitName("ViewCone");
223	hist.InitTitle("Incident Angle;#alpha [#circ]");
224	}
225
226	template<class T>
227	void MJSimulation::SetupCommonFileStructure(T &write) const
228	{
229	// Common run headers
230	write.AddContainer("MMcCorsikaRunHeader", "RunHeaders", kFALSE, 1);
231	write.AddContainer("MCorsikaRunHeader", "RunHeaders", kFALSE, 1);
232	write.AddContainer("MRawRunHeader", "RunHeaders", kTRUE, 1);
233	write.AddContainer("MGeomCam", "RunHeaders", kTRUE, 1);
234	write.AddContainer("MMcRunHeader", "RunHeaders", kTRUE, 1);
235
236	// Common events
237	write.AddContainer("MCorsikaEvtHeader", "Events", kFALSE);
238	write.AddContainer("MRawEvtHeader", "Events");
239	write.AddContainer("IncidentAngle", "Events", kFALSE);
240	write.AddContainer("MPointingPos", "Events", kFALSE);
241	write.AddContainer("MSimSourcePos", "Events", kFALSE);
242	write.AddContainer("MSrcPosCam", "Events", kFALSE);
243
244	if (fOperationMode!=kModeData)
245	return;
246
247	write.AddContainer("MMcEvt", "Events", kFALSE);
248	write.AddContainer("MMcEvtBasic", "Events", kFALSE);
249	}
250
251	void MJSimulation::SetupHeaderKeys(MWriteFitsFile &write,MRawRunHeader &header) const
252	{
253	const MTime now(-1);
254	write.SetHeaderKey("ISMC",true,"Bool if File is Montecarlo File");
255	write.SetHeaderKey("TELESCOP", "FACT", "");
256	write.SetHeaderKey("PACKAGE", "MARS Cheobs", "");
257	write.SetHeaderKey("VERSION", "1.0", "");
258	write.SetHeaderKey("CREATOR", "Ceres", "");
259	write.SetHeaderKey("EXTREL", 1., "");
260	write.SetHeaderKey("COMPILED", __DATE__" " __TIME__, "");
261	write.SetHeaderKey("REVISION", "0", "");
262	write.SetHeaderKey("ORIGIN", "FACT", "");
263	write.SetHeaderKey("DATE", now.GetStringFmt("%Y-%m-%dT%H:%M:%S").Data(), "");
264	write.SetHeaderKey("NIGHT", now.GetNightAsInt(), "");
265	write.SetHeaderKey("TIMESYS", "UTC", "");
266	write.SetHeaderKey("TIMEUNIT", "d", "");
267	write.SetHeaderKey("MJDREF", 40587, "");
268	//write.SetHeaderKey("BLDVER", 1, "");
269	write.SetHeaderKey("RUNID", header.GetRunNumber(), "");
270	write.SetHeaderKey("NBOARD", 40, "");
271	write.SetHeaderKey("NPIX", header.GetNumPixel(), "");
272	write.SetHeaderKey("NROI", header.GetNumSamplesHiGain(), "");
273	write.SetHeaderKey("NROITM", 0, "");
274	write.SetHeaderKey("TMSHIFT", 0, "");
275	write.SetHeaderKey("CAMERA", "MGeomCamFACT", "");
276	write.SetHeaderKey("DAQ", "DRS4", "");
277
278	// FTemme: ADCRANGE and ADC have to be calculated, using the values for
279	// the fadctype.
280	// write.SetHeaderKey("ADCRANGE", 2000, "Dynamic range in mV");
281	// write.SetHeaderKey("ADC", 12, "Resolution in bits");
282
283	switch(header.GetRunType())
284	{
285	case MRawRunHeader::kRTData\|MRawRunHeader::kRTMonteCarlo:
286	write.SetHeaderKey("RUNTYPE", "data", "");
287	break;
288	case MRawRunHeader::kRTPedestal\|MRawRunHeader::kRTMonteCarlo:
289	write.SetHeaderKey("RUNTYPE", "pedestal", "");
290	break;
291	case MRawRunHeader::kRTCalibration\|MRawRunHeader::kRTMonteCarlo:
292	write.SetHeaderKey("RUNTYPE", "calibration", "");
293	break;
294	}
295	// write.SetHeaderKey("ID", 777, "Board 0: Board ID");
296	// write.SetHeaderKey("FMVER", 532, "Board 0: Firmware Version");
297	// write.SetHeaderKey("DNA", "0", "");
298	// write.SetHeaderKey("BOARD", 0, "");
299	// write.SetHeaderKey("PRESC", 40, "");
300	// write.SetHeaderKey("PHASE", 0, "");
301	// write.SetHeaderKey("DAC0", 26500, "");
302	// write.SetHeaderKey("DAC1", 0, "");
303	// write.SetHeaderKey("DAC2", 0, "");
304	// write.SetHeaderKey("DAC3", 0, "");
305	// write.SetHeaderKey("DAC4", 28800, "");
306	// write.SetHeaderKey("DAC5", 28800, "");
307	// write.SetHeaderKey("DAC6", 28800, "");
308	// write.SetHeaderKey("DAC7", 28800, "");
309	write.SetHeaderKey("REFCLK", header.GetFreqSampling(), "");
310	write.SetHeaderKey("DRSCALIB", false, "");
311	// write.SetHeaderKey("TSTARTI", 0, "");
312	// write.SetHeaderKey("TSTARTF", 0., "");
313	// write.SetHeaderKey("TSTOPI", 0, "");
314	// write.SetHeaderKey("TSTOPF", 0., "");
315	// write.SetHeaderKey("DATE-OBS", "1970-01-01T00:00:00", "");
316	// write.SetHeaderKey("DATE-END", "1970-01-01T00:00:00", "");
317	// write.SetHeaderKey("NTRG", 0, "");
318	// write.SetHeaderKey("NTRGPED", 0, "");
319	// write.SetHeaderKey("NTRGLPE", 0, "");
320	// write.SetHeaderKey("NTRGTIM", 0, "");
321	// write.SetHeaderKey("NTRGLPI", 0, "");
322	// write.SetHeaderKey("NTRGEXT1", 0, "");
323	// write.SetHeaderKey("NTRGEXT2", 0, "");
324	// write.SetHeaderKey("NTRGMISC", 0, "");
325	}
326
327	void MJSimulation::SetupVetoColumns(MWriteFitsFile &write) const
328	{
329	write.VetoColumn("MParameterD.fVal");
330	write.VetoColumn("MRawEvtData.fLoGainPixId");
331	write.VetoColumn("MRawEvtData.fLoGainFadcSamples");
332	write.VetoColumn("MRawEvtData.fABFlags");
333	write.VetoColumn("MRawEvtHeader.fNumTrigLvl2");
334	//write.VetoColumn("MRawEvtHeader.fTrigPattern");
335	write.VetoColumn("MRawEvtHeader.fNumLoGainOn");
336	}
337
338	// Setup the header accordingly to the used operation mode
339	void MJSimulation::SetupHeaderOperationMode(MRawRunHeader &header) const
340	{
341	switch (fOperationMode)
342	{
343	case kModeData:
344	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTData);
345	header.SetRunInfo(0, fRunNumber<0 ? 3 : fRunNumber);
346	break;
347
348	case kModePed:
349	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPedestal);
350	header.SetSourceInfo("Pedestal");
351	header.SetRunInfo(0, fRunNumber<0 ? 1 : fRunNumber);
352	break;
353
354	case kModeCal:
355	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTCalibration);
356	header.SetSourceInfo("Calibration");
357	header.SetRunInfo(0, fRunNumber<0 ? 2 : fRunNumber);
358	break;
359
360	case kModePointRun:
361	header.SetRunType(MRawRunHeader::kRTMonteCarlo\|MRawRunHeader::kRTPointRun);
362	header.SetRunInfo(0, fRunNumber<0 ? 0 : fRunNumber);
363	break;
364	}
365	}
366
367	void MJSimulation::CreateBinningObjects(MParList &plist) const
368	{
369	MBinning binse = (MBinning) plist.FindCreateObj("MBinning","BinningEnergy");
370	binse->SetEdges(120, 1, 1000000,"log");
371	MBinning binsth = (MBinning) plist.FindCreateObj("MBinning","BinningThreshold");
372	binsth->SetEdges( 60, 0.9, 900000, "log");
373	MBinning binsee = (MBinning) plist.FindCreateObj("MBinning","BinningEnergyEst");
374	binsee->SetEdges( 36, 0.9, 900000, "log");
375	MBinning binss = (MBinning) plist.FindCreateObj("MBinning","BinningSize");
376	binss->SetEdges( 100, 1, 10000000, "log");
377	MBinning binsi = (MBinning) plist.FindCreateObj("MBinning","BinningImpact");
378	binsi->SetEdges( 32, 0, 800);
379	MBinning binsh = (MBinning) plist.FindCreateObj("MBinning","BinningHeight");
380	binsh->SetEdges( 150, 0, 50);
381	MBinning binsaz = (MBinning) plist.FindCreateObj("MBinning","BinningAz");
382	binsaz->SetEdges(720, -360, 360);
383	MBinning binszd = (MBinning) plist.FindCreateObj("MBinning","BinningZd");
384	binszd->SetEdges( 70, 0, 70);
385	MBinning binsvc = (MBinning) plist.FindCreateObj("MBinning","BinningViewCone");
386	binsvc->SetEdges( 35, 0, 7);
387	MBinning binsel = (MBinning) plist.FindCreateObj("MBinning","BinningTotLength");
388	binsel->SetEdges(150, 0, 50);
389	MBinning binsew = (MBinning) plist.FindCreateObj("MBinning","BinningMedLength");
390	binsew->SetEdges(150, 0, 15);
391	plist.FindCreateObj("MBinning","BinningWidth");
392	plist.FindCreateObj("MBinning","BinningLength");
393	plist.FindCreateObj("MBinning","BinningDistC");
394	plist.FindCreateObj("MBinning","BinningDist");
395	plist.FindCreateObj("MBinning","BinningTrigPos");
396	}
397
398	Bool_t MJSimulation::Process(const MArgs &args, const MSequence &seq)
399	{
400	// --------------------------------------------------------------------------------
401	// --------------------------------------------------------------------------------
402	// Initialization
403	// --------------------------------------------------------------------------------
404	// --------------------------------------------------------------------------------
405
406	// --------------------------------------------------------------------------------
407	// Logging output:
408	// --------------------------------------------------------------------------------
409	// - description of the job itself
410	// - list of the to processed sequence
411	*fLog << inf;
412	fLog->Separator(GetDescriptor());
413
414	if (!CheckEnv())
415	return kFALSE;
416
417	if (seq.IsValid())
418	*fLog << fSequence.GetFileName() << endl;
419	else
420	*fLog << "Input: " << args.GetNumArguments() << "-files" << endl;
421	*fLog << endl;
422
423	MDirIter iter;
424	if (seq.IsValid() && seq.GetRuns(iter, MSequence::kCorsika)<=0)
425	{
426	*fLog << err << "ERROR - Sequence valid but without files." << endl;
427	return kFALSE;
428	}
429	// --------------------------------------------------------------------------------
430	// Setup MParList and MTasklist
431	// --------------------------------------------------------------------------------
432	MParList plist;
433	plist.AddToList(this); // take care of fDisplay!
434	// setup TaskList
435	MTaskList tasks;
436	plist.AddToList(&tasks);
437
438	// --------------------------------------------------------------------------------
439	// --------------------------------------------------------------------------------
440	// Parameter Container Setup
441	// --------------------------------------------------------------------------------
442	// --------------------------------------------------------------------------------
443
444	// --------------------------------------------------------------------------------
445	// Setup container for the reflector, the cones and the camera geometry
446	// --------------------------------------------------------------------------------
447	// FIXME: Allow empty GeomCones!
448	MParEnv env0("Reflector");
449	MParEnv env1("GeomCones");
450	MParEnv env2("MGeomCam");
451	env0.SetClassName("MOptics");
452	env1.SetClassName("MGeomCam");
453	env2.SetClassName("MGeomCam");
454	plist.AddToList(&env0);
455	plist.AddToList(&env1);
456	plist.AddToList(&env2);
457	// --------------------------------------------------------------------------------
458	// Setup container for the "camera array" of the extracted number of photons
459	// --------------------------------------------------------------------------------
460	// from ExtractorRndm
461	plist.FindCreateObj("MPedPhotCam", "MPedPhotFromExtractorRndm");
462	// --------------------------------------------------------------------------------
463	// Setup spline containers for:
464	// --------------------------------------------------------------------------------
465	// - the pulse shape
466	// - the different photon acceptance splines
467	MParSpline shape("PulseShape");
468	MParSpline splinepde("PhotonDetectionEfficiency");
469	MParSpline splinemirror("MirrorReflectivity");
470	MParSpline splinecones("ConesAngularAcceptance");
471	MParSpline splinecones2("ConesTransmission");
472	MParSpline splineAdditionalPhotonAcceptance("AdditionalPhotonAcceptance");
473	plist.AddToList(&shape);
474	plist.AddToList(&splinepde);
475	plist.AddToList(&splinemirror);
476	plist.AddToList(&splinecones);
477	plist.AddToList(&splinecones2);
478	plist.AddToList(&splineAdditionalPhotonAcceptance);
479
480	// --------------------------------------------------------------------------------
481	// Setup container for the MC run header and the Raw run header
482	// --------------------------------------------------------------------------------
483	plist.FindCreateObj("MMcRunHeader");
484
485	MRawRunHeader header;
486	header.SetValidMagicNumber();
487	SetupHeaderOperationMode(header);
488	// FIXME: Move to MSimPointingPos, MSimCalibrationSignal
489	// Can we use this as input for MSimPointingPos?
490	header.SetObservation("On", "MonteCarlo");
491	plist.AddToList(&header);
492
493	// --------------------------------------------------------------------------------
494	// Setup container for the intended pulse position and for the trigger position
495	// --------------------------------------------------------------------------------
496	MParameterD pulpos("IntendedPulsePos");
497	// FIXME: Set a default which could be 1/3 of the digitization window
498	// pulpos.SetVal(40); // [ns]
499	plist.AddToList(&pulpos);
500
501	MParameterD trigger("TriggerPos");
502	trigger.SetVal(0);
503	plist.AddToList(&trigger);
504
505
506	// --------------------------------------------------------------------------------
507	// Setup container for the fix time offset, for residual time spread and for gapd time jitter
508	// --------------------------------------------------------------------------------
509	// Dominik and Sebastian on: fix time offsets
510	MMatrix fix_time_offsets_between_pixels_in_ns("MFixTimeOffset", 0);
511	plist.AddToList(&fix_time_offsets_between_pixels_in_ns);
512
513	// Jens Buss on: residual time spread
514	MParameterD resTimeSpread("ResidualTimeSpread");
515	resTimeSpread.SetVal(0.0);
516	plist.AddToList(&resTimeSpread);
517	// Jens Buss on: residual time spread
518	MParameterD gapdTimeJitter("GapdTimeJitter");
519	gapdTimeJitter.SetVal(0.0);
520	plist.AddToList(&gapdTimeJitter);
521
522	// --------------------------------------------------------------------------------
523	// Creation of binning objects and apply default settings
524	// --------------------------------------------------------------------------------
525	CreateBinningObjects(plist);
526
527	// --------------------------------------------------------------------------------
528	// --------------------------------------------------------------------------------
529	// Tasks Setup (Reading, Absorption, Reflector)
530	// --------------------------------------------------------------------------------
531	// --------------------------------------------------------------------------------
532
533	// --------------------------------------------------------------------------------
534	// Corsika read setup
535	// --------------------------------------------------------------------------------
536	MCorsikaRead read;
537	read.SetForceMode(fForceMode);
538
539	if (!seq.IsValid())
540	{
541	for (int i=0; i<args.GetNumArguments(); i++)
542	read.AddFile(args.GetArgumentStr(i));
543	}
544	else
545	read.AddFiles(iter);
546
547	if (read.GetNumFiles()==0 && fOperationMode==kModeData)
548	{
549	*fLog << err << "No files to read." << endl;
550	return kFALSE;
551	}
552
553	// --------------------------------------------------------------------------------
554	// Precut
555	// --------------------------------------------------------------------------------
556	MContinue precut("", "PreCut");
557	precut.IsInverted();
558	precut.SetAllowEmpty();
559
560	// --------------------------------------------------------------------------------
561	// MSimMMCS (don't know what this is doing) and calculation of the incident angle
562	// --------------------------------------------------------------------------------
563	MSimMMCS simmmcs;
564	const TString sin2 = "sin(MCorsikaEvtHeader.fZd)sin(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
565	const TString cos2 = "cos(MCorsikaEvtHeader.fZd)cos(MCorsikaRunHeader.fZdMinTMath::DegToRad())";
566	const TString cos = "cos(MCorsikaEvtHeader.fAz-MCorsikaRunHeader.fAzMin*TMath::DegToRad())";
567
568	const TString form = "acos("+sin2+""+cos+"+"+cos2+")TMath::RadToDeg()";
569
570	MParameterCalc calcangle(form, "CalcIncidentAngle");
571	calcangle.SetNameParameter("IncidentAngle");
572
573	// --------------------------------------------------------------------------------
574	// Absorption tasks
575	// --------------------------------------------------------------------------------
576	// - Atmosphere (simatm)
577	// - photon detection efficiency (absapd)
578	// - mirror reflectivity (absmir)
579	// - angular acceptance of winston cones (cones)
580	// - transmission of winston cones (cones2)
581	// - additional photon acceptance (only motivated, not measured) (additionalPhotonAcceptance)
582	MSimAtmosphere simatm;
583	MSimAbsorption absapd("SimPhotonDetectionEfficiency");
584	MSimAbsorption absmir("SimMirrorReflectivity");
585	MSimAbsorption cones("SimConesAngularAcceptance");
586	MSimAbsorption cones2("SimConesTransmission");
587	MSimAbsorption additionalPhotonAcceptance("SimAdditionalPhotonAcceptance");
588	absapd.SetParName("PhotonDetectionEfficiency");
589	absmir.SetParName("MirrorReflectivity");
590	cones.SetParName("ConesAngularAcceptance");
591	cones.SetUseTheta();
592	cones2.SetParName("ConesTransmission");
593	additionalPhotonAcceptance.SetParName("AdditionalPhotonAcceptance");
594	additionalPhotonAcceptance.SetForce(kTRUE);
595
596	// --------------------------------------------------------------------------------
597	// Simulating pointing position and simulating reflector
598	// --------------------------------------------------------------------------------
599	MSimPointingPos pointing;
600	MSrcPosCalc srcposcam;
601
602	MSimReflector reflect;
603	reflect.SetNameGeomCam("GeomCones");
604	reflect.SetNameReflector("Reflector");
605	// MSimStarField stars;
606
607	// --------------------------------------------------------------------------------
608	// Continue tasks
609	// --------------------------------------------------------------------------------
610	// - Processing of the current events stops, if there aren't at least two photons (see cont3)
611	MContinue cont1("MPhotonEvent.GetNumPhotons<1", "ContEmpty1");
612	MContinue cont2("MPhotonEvent.GetNumPhotons<1", "ContEmpty2");
613	MContinue cont3("MPhotonEvent.GetNumPhotons<2", "ContEmpty3");
614	cont1.SetAllowEmpty();
615	cont2.SetAllowEmpty();
616	cont3.SetAllowEmpty();
617
618	// --------------------------------------------------------------------------------
619	// --------------------------------------------------------------------------------
620	// Tasks Setup (Cones, SiPM-Simulation, RandomPhotons, Camera, Trigger, DAQ)
621	// --------------------------------------------------------------------------------
622	// --------------------------------------------------------------------------------
623
624	// --------------------------------------------------------------------------------
625	// GeomApply, SimPSF, SimGeomCam, SimCalibrationSignal
626	// --------------------------------------------------------------------------------
627	// - MGeomApply only resizes all MGeomCam parameter container to the actual
628	// number of pixels
629	// - MSimPSF applies an additional smearing of the photons on the camera window
630	// on default it is switched of (set to 0), but can be applied by setting:
631	// MSimPSF.fSigma: <value>
632	// in the config file.
633	// Be aware, that there is also a smearing of the photons implemented in
634	// MSimReflector by setting:
635	// MReflector.SetSigmaPSF: <value>
636	// in the config file. This is at the moment done in the default config file.
637	// - MSimGeomCam identifies which pixel was hit by which photon
638	// - MSimCalibrationSignal is only used for simulated calibration runs
639	MGeomApply apply;
640
641	MSimPSF simpsf;
642
643	MSimGeomCam simgeom;
644	simgeom.SetNameGeomCam("GeomCones");
645
646	MSimCalibrationSignal simcal;
647	simcal.SetNameGeomCam("GeomCones");
648
649	// --------------------------------------------------------------------------------
650	// Simulation of random photons
651	// --------------------------------------------------------------------------------
652	// - be aware that here default values for the nsb rate and for the dark
653	// count rate are set. They will be overwritten if the values are defined
654	// in the config file
655	// - if you want to simulate a specific nsb rate you have to set the filename
656	// in the config file to an empty string and then you can specify the NSB rate:
657	// MSimRandomPhotons.FileNameNSB:
658	// MSimRandomPhotons.FrequencyNSB: 0.0
659
660	// Sky Quality Meter: 21.82M = 2.02e-4cd/m^2
661	// 1cd = 12.566 lm / 4pi sr
662	// FIXME: Simulate photons before cones and QE!
663	MSimRandomPhotons simnsb;
664	simnsb.SetFreq(5.8, 0.004); // ph/m^2/nm/sr/ns NSB, 4MHz dark count rate
665	simnsb.SetNameGeomCam("GeomCones");
666	// FIXME: How do we handle star-light? We need the rate but we also
667	// need to process it through the mirror!
668
669	// --------------------------------------------------------------------------------
670	// Simulation from the SiPM to the DAQ
671	// --------------------------------------------------------------------------------
672	// - MSimAPD simulates the whole behaviour of the SiPMs:
673	// (dead time of cells, crosstalk, afterpulses)
674	// - MSimExcessNoise adds a spread on the weight of each signal in the SiPMs
675	// - MSimBundlePhotons restructured the photon list of MPhotonEvent via a look
676	// up table. At the moment the tasks is skipped, due to the fact that there
677	// is no file name specified in the config file
678	// - MSimSignalCam only fills a SignalCam container for the cherenkov photons
679	// - MSimCamera simulates the behaviour of the camera:
680	// (electronic noise, accoupling, time smearing and offset for the photons,
681	// pulses injected by all photons)
682	// - MSimTrigger simulates the behaviour of the Trigger:
683	// (Adding patch voltages, applying clipping, applying discriminator, applying
684	// time over threshold and a possible trigger logic)
685	// - MContinue conttrig stops the processing of the current event if the trigger
686	// position is negativ (and therefore not valid)
687	// - MSimReadout simulates the behaviour of the readout:
688	// (Digitization and saturation of the ADC)
689	MSimAPD simapd;
690	simapd.SetNameGeomCam("GeomCones");
691
692	MSimExcessNoise simexcnoise;
693	MSimBundlePhotons simsum;
694	MSimSignalCam simsignal;
695	MSimCamera simcam;
696	MSimTrigger simtrig;
697	MContinue conttrig("TriggerPos.fVal<0", "ContTrigger");
698	MSimReadout simdaq;
699
700	// --------------------------------------------------------------------------------
701	// Standard analysis with hillas parameters for the true cherenkov photons
702	// --------------------------------------------------------------------------------
703	// Remove isolated pixels
704	MImgCleanStd clean(0, 0);
705	//clean.SetCleanLvl0(0); // The level above which isolated pixels are kept
706	clean.SetCleanRings(0);
707	clean.SetMethod(MImgCleanStd::kAbsolute);
708
709	//clean.SetNamePedPhotCam("MPedPhotFromExtractorRndm");
710
711	MHillasCalc hcalc;
712	hcalc.Disable(MHillasCalc::kCalcConc);
713
714
715	// --------------------------------------------------------------------------------
716	// Setup of histogram containers and the corresponding fill tasks
717	// --------------------------------------------------------------------------------
718	// Here is no functionality for the simulation, it is only visualization via
719	// showplot
720	MHn mhn1, mhn2, mhn3, mhn4;
721	SetupHist(mhn1);
722	SetupHist(mhn2);
723	SetupHist(mhn3);
724	SetupHist(mhn4);
725
726	MH3 mhtp("TriggerPos.fVal-IntendedPulsePos.fVal-PulseShape.GetWidth*1000/MRawRunHeader.GetFreqSampling");
727	mhtp.SetName("TrigPos");
728	mhtp.SetTitle("Trigger position w.r.t. the first photon (=Pulse.Xmin) hitting a detector [ns];#Delta T [ns]");
729
730	MH3 mhew("MPhotonStatistics.fLength");
731	mhew.SetName("TotLength");
732	mhew.SetTitle("Time between first and last photon hitting a detector;#Delta T [ns]");
733
734	MH3 mhed("MPhotonStatistics.fTimeMedDev");
735	mhed.SetName("MedLength");
736	mhed.SetTitle("Median deviation (1#sigma);#sigma(#Delta T) [ns]");
737
738	MFillH fillh1(&mhn1, "", "FillCorsika");
739	MFillH fillh2(&mhn2, "", "FillH2");
740	MFillH fillh3(&mhn3, "", "FillH3");
741	MFillH fillh4(&mhn4, "", "FillH4");
742	MFillH filltp(&mhtp, "", "FillTriggerPos");
743	MFillH fillew(&mhew, "", "FillEvtWidth");
744	MFillH filled(&mhed, "", "FillMedDev");
745	fillh1.SetNameTab("Corsika", "Distribution as simulated by Corsika");
746	fillh2.SetNameTab("Detectable", "Distribution of events hit the detector");
747	fillh3.SetNameTab("Triggered", "Distribution of triggered events");
748	fillh4.SetNameTab("Cleaned", "Distribution after cleaning and cuts");
749	filltp.SetNameTab("TrigPos", "TriggerPosition w.r.t the first photon");
750	fillew.SetNameTab("EvtWidth", "Time between first and last photon hitting a detector");
751	filled.SetNameTab("MedDev", "Median deviation of arrival time of photons hitting a detector");
752
753	MHPhotonEvent planeG(1, "HPhotonEventGround"); // Get from MaxImpact
754	MHPhotonEvent plane0(2, "HMirrorPlane0"); // Get from MReflector
755	//MHPhotonEvent plane1(2, "HMirrorPlane1");
756	MHPhotonEvent plane2(2, "HMirrorPlane2");
757	MHPhotonEvent plane3(2, "HMirrorPlane3");
758	MHPhotonEvent plane4(2, "HMirrorPlane4");
759	MHPhotonEvent planeF1(6, "HPhotonEventCamera"); // Get from MGeomCam
760	MHPhotonEvent planeF2(header.IsPointRun()?4:6, "HPhotonEventCones"); // Get from MGeomCam
761
762	plist.AddToList(&planeG);
763	plist.AddToList(&plane0);
764	plist.AddToList(&plane2);
765	plist.AddToList(&plane3);
766	plist.AddToList(&plane4);
767	plist.AddToList(&planeF1);
768	plist.AddToList(&planeF2);
769
770	//MHPSF psf;
771
772	MFillH fillG(&planeG, "MPhotonEvent", "FillGround");
773	MFillH fill0(&plane0, "MirrorPlane0", "FillReflector");
774	//MFillH fill1(&plane1, "MirrorPlane1", "FillCamShadow");
775	MFillH fill2(&plane2, "MirrorPlane2", "FillCandidates");
776	MFillH fill3(&plane3, "MirrorPlane3", "FillReflected");
777	MFillH fill4(&plane4, "MirrorPlane4", "FillFocal");
778	MFillH fillF1(&planeF1, "MPhotonEvent", "FillCamera");
779	MFillH fillF2(&planeF2, "MPhotonEvent", "FillCones");
780	//MFillH fillP(&psf, "MPhotonEvent", "FillPSF");
781
782	fillG.SetNameTab("Ground", "Photon distribution at ground");
783	fill0.SetNameTab("Reflector", "Photon distribution at reflector plane w/o camera shadow");
784	//fill1.SetNameTab("CamShadow", "Photon distribution at reflector plane w/ camera shadow");
785	fill2.SetNameTab("Candidates", "Can hit photon distribution at reflector plane w/ camera shadow");
786	fill3.SetNameTab("Reflected", "Photon distribution after reflector projected to reflector plane");
787	fill4.SetNameTab("Focal", "Photon distribution at focal plane");
788	fillF1.SetNameTab("Camera", "Photon distribution which hit the detector");
789	fillF2.SetNameTab("Cones", "Photon distribution after cones");
790	//fillP.SetNameTab("PSF", "Photon distribution after cones for all mirrors");
791
792
793	MHCamEvent evt0a(/10/3, "Signal", "Average signal (absolute);;S [ph]");
794	MHCamEvent evt0c(/10/3, "MaxSignal", "Maximum signal (absolute);;S [ph]");
795	MHCamEvent evt0d(/11/8, "ArrTm", "Time after first photon;;T [ns]");
796	evt0a.SetErrorSpread(kFALSE);
797	evt0c.SetCollectMax();
798
799	MContinue cut("", "Cut");
800
801	MFillH fillx0a(&evt0a, "MSignalCam", "FillAvgSignal");
802	MFillH fillx0c(&evt0c, "MSignalCam", "FillMaxSignal");
803	MFillH fillx0d(&evt0d, "MSignalCam", "FillArrTm");
804	MFillH fillx1("MHHillas", "MHillas", "FillHillas");
805	MFillH fillx3("MHHillasSrc", "MHillasSrc", "FillHillasSrc");
806	MFillH fillx4("MHNewImagePar", "MNewImagePar", "FillNewImagePar");
807	MFillH fillth("MHThreshold", "", "FillThreshold");
808	MFillH fillca("MHCollectionArea", "", "FillTrigArea");
809
810	fillth.SetNameTab("Threshold");
811	fillca.SetNameTab("TrigArea");
812
813	// --------------------------------------------------------------------------------
814	// Formating of the outputfilepath
815	// --------------------------------------------------------------------------------
816	if (!fFileOut.IsNull())
817	{
818	const Ssiz_t dot = fFileOut.Last('.');
819	const Ssiz_t slash = fFileOut.Last('/');
820	if (dot>slash)
821	fFileOut = fFileOut.Remove(dot);
822	}
823
824	const char *regex = fRunNumber<0 ?
825	"s/[cC][eE][rR]([0-9]+)(-[tT][eE][lL]([0-9]+))?/%s\\/00$1.%03d%%s_MonteCarlo$3.root/" :
826	"s/[cC][eE][rR][0-9]+([0-9][0-9][0-9])(-[tT][eE][lL]([0-9]+))?/%s\\/%08d.$1%%s_MonteCarlo$3.root/";
827
828	const char *fmt = fFileOut.IsNull() ?
829	Form(regex, Esc(fPathOut).Data(), header.GetRunNumber()) :
830	Form("%s/%s%%s.root", Esc(fPathOut).Data(), Esc(fFileOut).Data());
831
832	const TString rule1(Form(fmt, fFileOut.IsNull()?"_R":""));
833	const TString rule2(Form(fmt, "_Y"));
834	const TString rule4(Form(fmt, "_I"));
835	TString rule3(Form(fmt, Form("_%c", header.GetRunTypeChar())));
836
837	// --------------------------------------------------------------------------------
838	// Setup of the outputfile tasks
839	// --------------------------------------------------------------------------------
840	MWriteRootFile write4a( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
841	MWriteRootFile write4b( 2, rule4, fOverwrite?"RECREATE":"NEW", "Star file");
842	MWriteRootFile write3b( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
843	MWriteRootFile write2a( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
844	MWriteRootFile write2b( 2, rule2, fOverwrite?"RECREATE":"NEW", "Signal file");
845	MWriteRootFile write1a( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
846	MWriteRootFile write1b( 2, rule1, fOverwrite?"RECREATE":"NEW", "Reflector file");
847
848	if (fWriteFitsFile)
849	rule3.ReplaceAll(".root", ".fits");
850
851	MWriteFitsFile write3af( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
852
853	if (fWriteFitsFile)
854	rule3 = "/dev/null";
855
856	MWriteRootFile write3ar( 2, rule3, fOverwrite?"RECREATE":"NEW", "Camera file");
857
858	MTask &write3a = fWriteFitsFile ? static_cast<MTask&>(write3af) : static_cast<MTask&>(write3ar);
859
860	//SetupHeaderKeys(write3af,header);
861	SetupVetoColumns(write3af);
862
863	write3af.SetBytesPerSample("Data", 2);
864
865	write1a.SetName("WriteRefData");
866	write1b.SetName("WriteRefMC");
867	write2a.SetName("WriteSigData");
868	write2b.SetName("WriteSigMC");
869	write3a.SetName("WriteCamData");
870	write3b.SetName("WriteCamMC");
871	write4a.SetName("WriteImgData");
872	write4b.SetName("WriteImgMC");
873
874	SetupCommonFileStructure(write1a);
875	SetupCommonFileStructure(write2a);
876	SetupCommonFileStructure(write3ar);
877	SetupCommonFileStructure(write3af);
878	SetupCommonFileStructure(write4a);
879
880	// R: Dedicated file structure
881	write1a.AddContainer("MPhotonEvent", "Events");
882
883	// Y: Dedicated file structure
884	write2a.AddContainer("MPedPhotFromExtractorRndm", "RunHeaders", kTRUE, 1); // FIXME: Needed for the signal files to be display in MARS
885	write2a.AddContainer("MSignalCam", "Events");
886
887	// D: Dedicated file structure
888	write3af.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
889	write3af.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
890	write3af.AddContainer("ResidualTimeSpread", "RunHeaders", kTRUE, 1);
891	write3af.AddContainer("GapdTimeJitter", "RunHeaders", kTRUE, 1);
892	write3af.AddContainer("MRawEvtData", "Events");
893	write3af.AddContainer("MTruePhotonsPerPixelCont", "Events");
894
895	write3ar.AddContainer("ElectronicNoise", "RunHeaders", kTRUE, 1);
896	write3ar.AddContainer("IntendedPulsePos", "RunHeaders", kTRUE, 1);
897	write3ar.AddContainer("MRawEvtData", "Events");
898	// It doesn't make much sene to write this information
899	// to the file because the units are internal units not
900	// related to the output samples
901	// if (header.IsDataRun() \|\| fForceTrigger)
902	// write3a.AddContainer("TriggerPos", "Events");
903
904	// I: Dedicated file structure
905	write4a.AddContainer("MHillas", "Events");
906	write4a.AddContainer("MHillasSrc", "Events");
907	write4a.AddContainer("MImagePar", "Events");
908	write4a.AddContainer("MNewImagePar", "Events");
909
910	// Basic MC data
911	write1b.AddContainer("MMcEvtBasic", "OriginalMC");
912	write2b.AddContainer("MMcEvtBasic", "OriginalMC");
913	write3b.AddContainer("MMcEvtBasic", "OriginalMC");
914	write4b.AddContainer("MMcEvtBasic", "OriginalMC");
915
916	// --------------------------------------------------------------------------------
917	// --------------------------------------------------------------------------------
918	// Filling of tasks in tasklist
919	// --------------------------------------------------------------------------------
920	// --------------------------------------------------------------------------------
921
922	if (header.IsDataRun())
923	{
924	tasks.AddToList(&read); // Reading Corsika
925	tasks.AddToList(&precut); // Precut
926	tasks.AddToList(&pointing); // Simulating pointing
927	tasks.AddToList(&srcposcam); // calculate origin in camera
928	tasks.AddToList(&simmmcs); // Simulating MMCS
929	if (!fPathOut.IsNull() && !HasNullOut()) // Write Tasks for corsika infos
930	{
931	//tasks.AddToList(&write1b);
932	tasks.AddToList(&write2b);
933	if (fCamera)
934	tasks.AddToList(&write3b);
935	if (header.IsDataRun())
936	tasks.AddToList(&write4b);
937	}
938	// if (header.IsPointRun())
939	// tasks.AddToList(&stars);
940	if (1)
941	tasks.AddToList(&simatm); // Here because before fillh1 // atmosphere absorption
942	tasks.AddToList(&calcangle); // calculation incident angle
943	tasks.AddToList(&fillh1); // fill histogram task
944	tasks.AddToList(&fillG); // fill histogram task
945	if (!header.IsPointRun())
946	{
947	tasks.AddToList(&absapd); // photon detection efficiency of the apds
948	tasks.AddToList(&absmir); // mirror reflectivity
949	tasks.AddToList(&additionalPhotonAcceptance); // addition photon acceptance
950	if (0)
951	tasks.AddToList(&simatm); // FASTER? // be aware this is 'commented'
952	}
953	tasks.AddToList(&reflect); // Simulation of the reflector
954	if (!header.IsPointRun())
955	{
956	tasks.AddToList(&fill0); // fill histogram task
957	//tasks.AddToList(&fill1);
958	tasks.AddToList(&fill2); // fill histogram task
959	tasks.AddToList(&fill3); // fill histogram task
960	tasks.AddToList(&fill4); // fill histogram task
961	tasks.AddToList(&fillF1); // fill histogram task
962	}
963	tasks.AddToList(&cones); // angular acceptance of winston cones
964	tasks.AddToList(&cones2); // transmission of winston cones
965	//if (header.IsPointRun())
966	// tasks.AddToList(&fillP);
967	tasks.AddToList(&cont1); // continue if at least 2 photons
968	}
969	// -------------------------------
970	tasks.AddToList(&apply); // apply geometry to MGeomCam containers
971	if (header.IsDataRun())
972	{
973	tasks.AddToList(&simpsf); // simulates additional psf (NOT used in default mode)
974	tasks.AddToList(&simgeom); // tag which pixel is hit by which photon
975	tasks.AddToList(&cont2); // continue if at least 2 photons
976	if (!header.IsPointRun())
977	{
978	tasks.AddToList(&fillF2); // fill histogram task
979	tasks.AddToList(&fillh2); // fill histogram task
980	}
981	tasks.AddToList(&cont3); // continue if at least 3 photons
982	}
983	if (fCamera)
984	{
985	if (header.IsPedestalRun() \|\| header.IsCalibrationRun())
986	tasks.AddToList(&simcal); // add calibration signal for calibration runs
987	tasks.AddToList(&simnsb); // simulate nsb and dark counts
988	tasks.AddToList(&simapd); // simulate SiPM behaviour (dead time, crosstalk ...)
989	tasks.AddToList(&simexcnoise); // add excess noise
990	}
991	tasks.AddToList(&simsum); // bundle photons (NOT used in default mode)
992	if (fCamera)
993	{
994	tasks.AddToList(&simcam); // simulate camera behaviour (creates analog signal)
995	if (header.IsDataRun() \|\| fForceTrigger)
996	tasks.AddToList(&simtrig); // simulate trigger
997	tasks.AddToList(&conttrig); // continue if trigger pos is valid
998	tasks.AddToList(&simdaq); // simulate data aquisition
999	}
1000	tasks.AddToList(&simsignal); // What do we do if signal<0? // fill MSimSignal container
1001	if (!fPathOut.IsNull() && !HasNullOut())
1002	{
1003	//tasks.AddToList(&write1a);
1004	if (!header.IsPedestalRun())
1005	tasks.AddToList(&write2a); // outputtask
1006	if (fCamera)
1007	tasks.AddToList(&write3a); // outputtask (this is the raw data writing tasks)
1008	}
1009	// -------------------------------
1010	if (fCamera)
1011	{
1012	// FIXME: MHCollectionArea Trigger Area!
1013	if (header.IsDataRun())
1014	tasks.AddToList(&fillh3); // fill histogram task
1015	tasks.AddToList(&filltp); // fill histogram task
1016	}
1017	if (header.IsDataRun())
1018	{
1019	tasks.AddToList(&fillew); // fill histogram task
1020	tasks.AddToList(&filled); // fill histogram task
1021	}
1022	if (!header.IsPedestalRun())
1023	{
1024	tasks.AddToList(&fillx0a); // fill histogram task
1025	tasks.AddToList(&fillx0c); // fill histogram task
1026	}
1027	if (header.IsDataRun())
1028	{
1029	tasks.AddToList(&clean); // Cleaning for standard analysis
1030	tasks.AddToList(&hcalc); // Hillas parameter calculation
1031	tasks.AddToList(&cut);
1032	tasks.AddToList(&fillx0d); // fill histogram task
1033	tasks.AddToList(&fillx1); // fill histogram task
1034	//tasks.AddToList(&fillx2);
1035	tasks.AddToList(&fillx3); // fill histogram task
1036	tasks.AddToList(&fillx4); // fill histogram task
1037	if (!HasNullOut())
1038	tasks.AddToList(&write4a);
1039	//tasks.AddToList(&fillx5);
1040
1041	tasks.AddToList(&fillh4); // fill histogram task
1042	tasks.AddToList(&fillth); // fill histogram task
1043	tasks.AddToList(&fillca); // fill histogram task
1044	}
1045
1046
1047	// --------------------------------------------------------------------------------
1048	// --------------------------------------------------------------------------------
1049	// Event loop and processing display
1050	// --------------------------------------------------------------------------------
1051	// --------------------------------------------------------------------------------
1052
1053	// --------------------------------------------------------------------------------
1054	// Creation of event loop
1055	// --------------------------------------------------------------------------------
1056	tasks.SetAccelerator(MTask::kAccDontReset\|MTask::kAccDontTime);
1057
1058	// Create and setup the eventloop
1059	MEvtLoop evtloop(fName);
1060	evtloop.SetParList(&plist);
1061	evtloop.SetDisplay(fDisplay);
1062	evtloop.SetLogStream(&gLog);
1063	if (!SetupEnv(evtloop))
1064	return kFALSE;
1065
1066	// FIXME: If pedestal file given use the values from this file
1067
1068
1069	// --------------------------------------------------------------------------------
1070	// Preparation of the graphicalk display which is shown while processing
1071	// --------------------------------------------------------------------------------
1072
1073	MGeomCam cam = static_cast<MGeomCam>(env2.GetCont());
1074
1075	write3af.SetGeometry(cam->ClassName());
1076
1077	MBinning binsd = (MBinning) plist.FindObject("BinningDistC");
1078	MBinning binsd0 = (MBinning) plist.FindObject("BinningDist");
1079	MBinning binstr = (MBinning) plist.FindObject("BinningTrigPos");
1080	if (binstr->IsDefault())
1081	binstr->SetEdgesLin(150, -header.GetFreqSampling()/1000.*shape.GetWidth(),
1082	header.GetFreqSampling()/1000.*(header.GetNumSamples()+shape.GetWidth()));
1083
1084	if (binsd->IsDefault() && cam)
1085	binsd->SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
1086
1087	if (binsd0->IsDefault() && cam)
1088	binsd0->SetEdgesLin(100, 0, cam->GetMaxRadius()*cam->GetConvMm2Deg());
1089
1090
1091	header.Print();
1092
1093	// FIXME: Display acceptance curves!
1094
1095	if (fDisplay)
1096	{
1097	TCanvas &c = fDisplay->AddTab("Info");
1098	c.Divide(2,2);
1099
1100	c.cd(1);
1101	gPad->SetBorderMode(0);
1102	gPad->SetFrameBorderMode(0);
1103	gPad->SetGridx();
1104	gPad->SetGridy();
1105	gROOT->SetSelectedPad(0);
1106	shape.DrawClone()->SetBit(kCanDelete);
1107
1108	if (env0.GetCont() && (header.IsDataRun() \|\| header.IsPointRun()))
1109	{
1110	c.cd(3);
1111	gPad->SetBorderMode(0);
1112	gPad->SetFrameBorderMode(0);
1113	gPad->SetGridx();
1114	gPad->SetGridy();
1115	gROOT->SetSelectedPad(0);
1116	static_cast<MOptics*>(env0.GetCont())->DrawClone("line")->SetBit(kCanDelete);
1117	}
1118
1119	if (fCamera)
1120	{
1121	if (env1.GetCont())
1122	{
1123	c.cd(2);
1124	gPad->SetBorderMode(0);
1125	gPad->SetFrameBorderMode(0);
1126	gPad->SetGridx();
1127	gPad->SetGridy();
1128	gROOT->SetSelectedPad(0);
1129	MHCamera hcam = new MHCamera(static_cast<MGeomCam&>(env1.GetCont()));
1130	hcam->SetStats(kFALSE);
1131	hcam->SetBit(MHCamera::kNoLegend);
1132	hcam->SetBit(kCanDelete);
1133	hcam->Draw();
1134	}
1135
1136	if (cam)
1137	{
1138	c.cd(4);
1139	gPad->SetBorderMode(0);
1140	gPad->SetFrameBorderMode(0);
1141	gPad->SetGridx();
1142	gPad->SetGridy();
1143	gROOT->SetSelectedPad(0);
1144	MHCamera hcam = new MHCamera(cam);
1145	hcam->SetStats(kFALSE);
1146	hcam->SetBit(MHCamera::kNoLegend);
1147	hcam->SetBit(kCanDelete);
1148	hcam->Draw();
1149	}
1150	}
1151
1152	TCanvas &d = fDisplay->AddTab("Info2");
1153	d.Divide(2,3);
1154
1155	d.cd(1);
1156	gPad->SetBorderMode(0);
1157	gPad->SetFrameBorderMode(0);
1158	gPad->SetGridx();
1159	gPad->SetGridy();
1160	gROOT->SetSelectedPad(0);
1161	splinepde.DrawClone()->SetBit(kCanDelete);
1162
1163	d.cd(3);
1164	gPad->SetBorderMode(0);
1165	gPad->SetFrameBorderMode(0);
1166	gPad->SetGridx();
1167	gPad->SetGridy();
1168	gROOT->SetSelectedPad(0);
1169	splinecones2.DrawClone()->SetBit(kCanDelete);
1170
1171	d.cd(5);
1172	gPad->SetBorderMode(0);
1173	gPad->SetFrameBorderMode(0);
1174	gPad->SetGridx();
1175	gPad->SetGridy();
1176	gROOT->SetSelectedPad(0);
1177	splinemirror.DrawClone()->SetBit(kCanDelete);
1178
1179	d.cd(2);
1180	gPad->SetBorderMode(0);
1181	gPad->SetFrameBorderMode(0);
1182	gPad->SetGridx();
1183	gPad->SetGridy();
1184	gROOT->SetSelectedPad(0);
1185	splinecones.DrawClone()->SetBit(kCanDelete);
1186	//splinecones2.DrawClone("same")->SetBit(kCanDelete);
1187
1188	d.cd(6);
1189	gPad->SetBorderMode(0);
1190	gPad->SetFrameBorderMode(0);
1191	gPad->SetGridx();
1192	gPad->SetGridy();
1193	gROOT->SetSelectedPad(0);
1194	MParSpline sall = (MParSpline)splinepde.DrawClone();
1195	//all->SetTitle("Combined acceptance");
1196	sall->SetBit(kCanDelete);
1197	if (splinemirror.GetSpline())
1198	sall->Multiply(*splinemirror.GetSpline());
1199	if (splinecones2.GetSpline())
1200	sall->Multiply(*splinecones2.GetSpline());
1201	}
1202
1203	// --------------------------------------------------------------------------------
1204	// Perform event loop
1205	// --------------------------------------------------------------------------------
1206
1207	// Execute first analysis
1208	if (!evtloop.Eventloop(fMaxEvents))
1209	{
1210	gLog << err << GetDescriptor() << ": Failed." << endl;
1211	return kFALSE;
1212	}
1213
1214	//-------------------------------------------
1215	// FIXME: Display Spline in tab
1216	// FIXME: Display Reflector in tab
1217	// FIXME: Display Routing(?) in tab
1218	// FIXME: Display Camera(s) in tab
1219	//-------------------------------------------
1220
1221	if (!WriteResult(plist, seq, header.GetRunNumber()))
1222	return kFALSE;
1223
1224	*fLog << all << GetDescriptor() << ": Done." << endl << endl << endl;;
1225
1226	return kTRUE;
1227	}

Note: See TracBrowser for help on using the repository browser.

Download in other formats: