source: trunk/Mars/resmc/fact/alternatives/ceres_withoutNSB_Roi300.rc@ 19948

Last change on this file since 19948 was 17379, checked in by tbretz, 11 years ago
Files moved here because they are not part of the default setup.
File size: 12.1 KB
Line 
1# ==========================================================================
2#############################################################################
3# ==========================================================================
4# General
5# ==========================================================================
6#############################################################################
7# ==========================================================================
8
9# -------------------------------------------------------------------------
10# Use this if you want to setup the logging stream for the jobs
11# (overwrites command line options)
12# -------------------------------------------------------------------------
13MLog.VerbosityLevel: 4
14#MLog.DebugLevel: 1
15#MLog.NoColors: yes
16
17# ==========================================================================
18#############################################################################
19# ==========================================================================
20# Ceres
21# ==========================================================================
22#############################################################################
23# ==========================================================================
24
25# -------------------------------------------------------------------------
26# Use this if you want to write the MJStar output somewhere
27# If you don't want it, it is written to the calibration output anyhow.
28# -------------------------------------------------------------------------
29#PathOut: .
30#PathIn: .
31
32
33# -------------------------------------------------------------------------
34# Configure Eventloop
35# -------------------------------------------------------------------------
36#MaxEvents: 10000
37#Overwrite: yes,no
38
39
40# -------------------------------------------------------------------------
41# Use this to setup binnings. For more details see: MBinning::ReadEnv
42# -------------------------------------------------------------------------
43# BinningEnergy.Raw: 100 1 100000 log
44# BinningSize.Raw: 100 1 10000000 log
45BinningImpact.Raw: 40 0 1000
46# BinningHeight.Raw: 50 0 12
47# BinningAz.Raw: 360 -360 360
48# BinningZd.Raw: 70 0 70
49# BinningViewCone.Raw: 155 0 31
50BinningTrigPos.Raw: 300 -25 275
51# BinningEvtWidth.Raw: 150 0 25
52# BinningDist.Raw: 100 0 2.5
53# BinningDistC.Raw: 100 0 2.5
54# BinningThreshold.Raw: 35 0.9 90000 log
55# BinningEnergyEst.Raw: 100 0.9 90000 log
56
57
58# -------------------------------------------------------------------------
59# Initialize random number generator (see MJob::InitRandomNumberGenerator)
60# -------------------------------------------------------------------------
61RandomNumberGenerator: TRandom3
62#RandomNumberSeedValue: 0
63
64
65# -------------------------------------------------------------------------
66# Ceres general setup
67# -------------------------------------------------------------------------
68
69# Switch off the camera "electronics"
70#Camera: Off
71
72# Force the use of the "hardware" trigger for calibration data
73#ForceTrigger: Yes
74
75
76# -------------------------------------------------------------------------
77# Some setup for the atmosphere. The default should be well suited.
78# -------------------------------------------------------------------------
79#MSimAtmosphere.FileAerosols: resmc/atmopshere-aerosols.txt
80#MSimAtmosphere.FileOzone: resmc/atmopshere-ozone.txt
81
82
83# -------------------------------------------------------------------------
84# Here you can control the poiting of the telescope. To switch on
85# off-target observations set a value for the distance !=0 [deg].
86# For details see MSimPointingPos
87# -------------------------------------------------------------------------
88#MSimPointingPos.OffTargetDistance: 0.4
89#MSimPointingPos.OffTargetPhi: -1
90
91
92# -------------------------------------------------------------------------
93# Setup the reflector and camera geometry
94# -------------------------------------------------------------------------
95Reflector.Constructor: MReflector
96
97# For the file definition see MReflector::ReadFile
98
99Reflector.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/fact-reflector.txt
100# Units mm: ~0.02°
101#Reflector.SetSigmaPSF: 1.8
102# Units mm: ~0.03°
103#Reflector.SetSigmaPSF: 2.6
104#Reflector.SetSigmaPSF: 1.66
105
106# new Value from 7.12.2012:
107# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm
108#Reflector.SetSigmaPSF: 1.3
109
110# new Value from 29.05.2013:
111# Set SigmaPSF to pixelsize
112Reflector.SetSigmaPSF: 10.0
113
114# --- DWARF ---
115# distance from mirror to camera [cm]
116#focal_distance 489.73
117# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!)
118#paraboloid_focal 488.87
119
120#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887);
121MGeomCam.Constructor: MGeomCamFACT();
122
123#MSimBundlePhotons.FileName: resmc/dwarf-fact.txt
124
125# Set the APD type (1: 30x30 <default>, 2: 60x60, 3:60x60(ct=15%))
126MSimAPD.Type: 4
127MSimExcessNoise.ExcessNoise: 0.12
128
129# -------------------------------------------------------------------------
130# Setup the absorption, conversion efficiency and angular acceptance
131# -------------------------------------------------------------------------
132MirrorReflectivity.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt
133PhotonDetectionEfficiency.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/fact-pde-1.0V.txt
134ConesAngularAcceptance.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/fact-cones-angular-acceptance.txt
135ConesTransmission.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt
136
137# -------------------------------------------------------------------------
138# Setup what in MMCS would be called "additional spot size"
139# -------------------------------------------------------------------------
140#MSimPSF.Sigma: -1
141#MSimReflector.DetectorMargin: 0
142
143# -------------------------------------------------------------------------
144# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2
145# -------------------------------------------------------------------------
146# Dark Counts per APD: ~4MHz
147#MSimRandomPhotons.FrequencyFixed: 0.004
148# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular
149# acceptance and the wavelength acceptance of the camera (window, apd, etc)
150# 0.040 1/ns/cm^2 NSB-rate:
151MSimRandomPhotons.FileNameNSB:
152MSimRandomPhotons.FrequencyNSB: 0.0
153
154# FIXME: With a class describing the cones we could give NSB as
155# per sr and cm^2
156
157# -------------------------------------------------------------------------
158# Setup the trigger
159# -------------------------------------------------------------------------
160# This line could be omitted but then the discriminator would be
161# evaluated for all pixels not just for the pixels which are
162# later "connected" in the trigger (used in the coincidence map)
163# MSimTrigger.FileNameRouteAC: resmc/magic-trigger-1NN.txt
164
165MSimTrigger.FileNameRouteAC: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/fact-trigger-sum.txt
166#MSimTrigger.DiscriminatorThreshold: 13416
167
168# new Value from 29.01.2013: DiscriminatorThreshold is 9*offset(3280)+21*gain(328)=36408
169MSimTrigger.DiscriminatorThreshold: 36408
170
171# new Value from 28.08.2013: DiscriminatorThreshold is 9*offset(3720)+21*gain(372)=41292
172MSimTrigger.DiscriminatorThreshold: 41292
173
174# HEGRA like single pixel above threshold trigger
175#MSimTrigger.DiscriminatorThreshold: 10.00
176# Is this an option for a single pixel trigger?
177#MSimTrigger.DigitalSignalLength: -1
178#MSimTrigger.CoincidenceTime: 3
179
180# Magic like 2NN trigger (inner 396 pixel)
181#MSimTrigger.FileNameCoincidenceMap: resmc/magic-trigger-2NN.txt
182#MSimTrigger.DiscriminatorThreshold: 7.00
183#MSimTrigger.DigitalSignalLength: 8
184#MSimTrigger.CoincidenceTime: 0.5
185
186# Magic like 3NN trigger (inner 396 pixel)
187#MSimTrigger.FileNameCoincidenceMap: resmc/magic-trigger-3NN.txt
188#MSimTrigger.DiscriminatorThreshold: 6.0
189#MSimTrigger.DigitalSignalLength: 8
190#MSimTrigger.CoincidenceTime: 0.5
191
192# Magic like 4NN trigger (inner 396 pixel)
193#MSimTrigger.FileNameCoincidenceMap: resmc/magic-trigger-4NN.txt
194#MSimTrigger.DiscriminatorThreshold: 5.0
195#MSimTrigger.DigitalSignalLength: 8
196#MSimTrigger.CoincidenceTime: 0.5
197
198#MSimTrigger.FileNameRouteAC: resmc/fact-7map.txt
199#MSimTrigger.DiscriminatorThreshold: 14040
200#MSimTrigger.DigitalSignalLength: 8
201#MSimTrigger.CoincidenceTime: 0.5
202
203# Every Pixel(!) should see the same signal independant of its size
204MSimCalibrationSignal.NumPhotons: 24
205MSimCalibrationSignal.NumEvents: 1000
206
207IntendedPulsePos.Val: 30
208
209#PulseShape.Function.Name: exp(-(x/2)^2/2)
210#PulseShape.FileName: /fhgfs/groups/app/mc_workshop/datacenter/setup/ceres/030/dwarf-pulse.txt
211
212# -------------------------------------------------------------------------
213# Description how a pedestal/calibration signal is produced
214# -------------------------------------------------------------------------
215
216#MSimCalibrationSignal.NumEvents: 1000
217#MSimCalibrationSignal.NumPhotons; 5
218#MSimCalibrationSignal.TimeJitter; 1.0
219
220
221# -------------------------------------------------------------------------
222# Setup the FADC
223# -------------------------------------------------------------------------
224
225MRawRunHeader.SamplingFrequency: 2000
226MRawRunHeader.NumSamples: 300
227MRawRunHeader.NumBytesPerSample: 2
228MRawRunHeader.FadcResolution: 12
229
230# Old values
231# Baseline at 15 like in MAGIC
232# 1.5 bit noise for a gain of 64
233# This allows a maximum of 200phe/pix
234#MSimCamera.DefaultOffset: 960
235#MSimCamera.DefaultNoise: 96
236#MSimCamera.DefaultGain: 358
237
238# New values
239#MSimCamera.DefaultOffset: 1000
240#MSimCamera.DefaultNoise: 30
241#MSimCamera.DefaultGain: 190
242
243# New values from 7.12.2012
244# gain of one pe is ~10mV, corresponds to 328 DAC (16 bit with a dynamic range of 2 V)
245# offset is 10 pe (->3280 DAC)
246# electronic noise is about 0.15 pe (->50 DAC)
247#MSimCamera.DefaultOffset: 3280
248#MSimCamera.DefaultNoise: 50
249#MSimCamera.DefaultGain: 328
250
251# New values from 28.08.2013
252# Gain (integral over 30 slices) of one pe is 123.5 mV ns in real data.
253# Gain(integral over 30 slices over the PulseShape is 10.8757 1ns.
254# The scaling factor (DefaultGain) should be 123.5 / 10.8757 mV = 11,3556 mV
255# this corresponds to 372 ADC (16 bit with a dynamic range of 2 V)
256# offset is 10 pe (->3720 ADC)
257# electronic noise is about 1.4 mV (->45 ADC)
258MSimCamera.DefaultOffset: 3720
259MSimCamera.DefaultNoise: 45
260MSimCamera.DefaultGain: 372
261
262# Value for the fudgefactor in the calculation of the accoupling:
263MSimCamera.fACFudgeFactor: 0.3367
264
265#MSimReadout.fConversionFactor: 1
266
267# The number of sampling points is almost irrelevant because they
268# are equidistant, i.e. calculated and no search is necessary.
269# Nevertheless, you must make sure that there are enough points
270# to sample the function accuratly enough.
271# Attention: x in the function is given in slices, so if you change the sampling
272# frequency you have to change also this function
273PulseShape.Function.Name: (1.626*(1-exp(-0.3803*0.5*x))*exp(-0.0649*0.5*x))
274PulseShape.Function.Npx: 300
275PulseShape.Function.Xmin: 0
276PulseShape.Function.Xmax: 300
277
278# -------------------------------------------------------------------------
279# Setup an image cleaning on the pure gamma signal (without noise)
280# -------------------------------------------------------------------------
281
282#MImgCleanStd.CleanLevel1: 6.0
283#MImgCleanStd.CleanLevel2: 6.0
284
285# -------------------------------------------------------------------------
286# This is a cut executed after the calculation of the image parameters
287# -------------------------------------------------------------------------
288Cut.Inverted: Yes
289
290#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6
291Cut.Condition: MHillas.fSize>10
292#&& MHillas.fSize>30
293#MSimTrigger.SimulateElectronics: Off
294
295# Does not trigger anyway
296ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10
Note: See TracBrowser for help on using the repository browser.