Ignore:
Timestamp:
01/27/11 08:32:16 (13 years ago)
Author:
neise
Message:
synchronous trigger handling added
continous soft trigger generation.
---> control frequency via 'send 0x21??'
each step increases trigger delay by 12.5ms
0x2100 = 40Hz
0x21FF = 0.3Hz
File:
1 edited

Legend:

Unmodified
Added
Removed
  • firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hdl/fad_board.ucf

    r10074 r10121  
    3535
    3636# BOARD ID  - inputs
    37 #NET LINE<0> LOC  = Y1 | IOSTANDARD=LVCMOS33;           #ok
    38 #NET LINE<1> LOC  = Y2 | IOSTANDARD=LVCMOS33;           #ok
    39 #NET LINE<2> LOC  = AB1 | IOSTANDARD=LVCMOS33;          #ok
    40 #NET LINE<3> LOC  = AC1 | IOSTANDARD=LVCMOS33;          #ok
    41 #NET LINE<4> LOC  = AD1 | IOSTANDARD=LVCMOS33;          #ok
    42 #NET LINE<5> LOC  = AD2 | IOSTANDARD=LVCMOS33;          #ok
     37NET POSITION_ID<0> LOC  = Y1 | IOSTANDARD=LVCMOS33;             #ok  name was LINE befoer i changed it
     38NET POSITION_ID<1> LOC  = Y2 | IOSTANDARD=LVCMOS33;             #ok
     39NET POSITION_ID<2> LOC  = AB1 | IOSTANDARD=LVCMOS33;            #ok
     40NET POSITION_ID<3> LOC  = AC1 | IOSTANDARD=LVCMOS33;            #ok
     41NET POSITION_ID<4> LOC  = AD1 | IOSTANDARD=LVCMOS33;            #ok
     42NET POSITION_ID<5> LOC  = AD2 | IOSTANDARD=LVCMOS33;            #ok
    4343
    4444# W5300
     
    9999
    100100NET SRIN LOC  = E1 | IOSTANDARD=LVCMOS25;                       #ok -- nur fuer vollauslese noetig; auf Z legen.
    101 #NET REFCLK LOC  = AC11 | IOSTANDARD=LVCMOS25;          #ok -- listen to REFCLK possible
     101NET REFCLK LOC  = AC11 | IOSTANDARD=LVCMOS25;           #ok -- listen to REFCLK possible
    102102
    103103
Note: See TracChangeset for help on using the changeset viewer.