Index: firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hdl/trigger_manager_beha.vhd
===================================================================
--- firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hdl/trigger_manager_beha.vhd	(revision 10122)
+++ firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hdl/trigger_manager_beha.vhd	(revision 10122)
@@ -0,0 +1,84 @@
+--
+-- VHDL Architecture FACT_FAD_lib.trigger_manager.beha
+--
+-- Created:
+--          by - daqct3.UNKNOWN (IHP110)
+--          at - 11:26:52 14.01.2011
+--
+-- using Mentor Graphics HDL Designer(TM) 2009.1 (Build 12)
+--
+LIBRARY ieee;
+USE ieee.std_logic_1164.all;
+USE ieee.std_logic_arith.all;
+
+ENTITY trigger_manager IS
+  port (
+    clk : in std_logic;
+    
+    trigger_in : in std_logic;
+    trigger_out : out std_logic := '0';
+    
+    drs_write : out std_logic := '1';
+    
+    drs_readout_ready : in std_logic;
+    drs_readout_ready_ack : out std_logic := '0'
+
+  );
+END ENTITY trigger_manager;
+
+--
+ARCHITECTURE beha OF trigger_manager IS
+  
+  type trigger_in_state_type is (T_IN_MAIN, T_IN_END);
+  type trigger_out_state_type is (T_OUT_MAIN, T_OUT_TSTART, T_OUT_TEND);
+  
+  signal trigger_in_state : trigger_in_state_type := T_IN_MAIN;
+  signal trigger_out_state : trigger_out_state_type := T_OUT_MAIN;
+
+  signal drs_write_flag, drs_write_flag_int : std_logic := '0';
+  
+BEGIN
+  
+  trigger_in_proc : process (trigger_in, trigger_in_state) begin
+    case trigger_in_state is
+      when T_IN_MAIN =>
+        if rising_edge (trigger_in) then
+          -- stop drs
+          drs_write <= '0';
+          -- set flag
+          drs_write_flag <= '1';
+        end if;
+      when T_IN_END =>
+        drs_write <= '1';
+        drs_write_flag <= '0';
+    end case; -- trigger_in_state
+  end process trigger_in_proc;
+  
+  trigger_out_proc : process (clk) begin
+    if rising_edge (clk) then
+      
+      drs_write_flag_int <= drs_write_flag;
+      
+      case trigger_out_state is
+        when T_OUT_MAIN =>
+          if (drs_write_flag_int = '1') then
+            trigger_out <= '1';
+            drs_readout_ready_ack <= '0';
+            trigger_out_state <= T_OUT_TSTART;
+          end if;
+        when T_OUT_TSTART =>
+          if (drs_readout_ready = '1') then
+            trigger_out <= '0';
+            trigger_in_state <= T_IN_END;
+            trigger_out_state <= T_OUT_TEND;
+          end if;
+        when T_OUT_TEND =>
+          drs_readout_ready_ack <= '1';
+          trigger_in_state <= T_IN_MAIN;
+          trigger_out_state <= T_OUT_MAIN;
+      end case; -- trigger_out_state
+    end if;
+  end process trigger_out_proc;
+  
+END ARCHITECTURE beha;
+
Index: firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_continous_pulser._epf
===================================================================
--- firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_continous_pulser._epf	(revision 10122)
+++ firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_continous_pulser._epf	(revision 10122)
@@ -0,0 +1,2 @@
+DEFAULT_ARCHITECTURE atom beha
+DEFAULT_FILE atom continous_pulser_beha.vhd
Index: firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_trigger_manager._epf
===================================================================
--- firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_trigger_manager._epf	(revision 10122)
+++ firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hds/_trigger_manager._epf	(revision 10122)
@@ -0,0 +1,2 @@
+DEFAULT_ARCHITECTURE atom beha
+DEFAULT_FILE atom trigger_manager_beha.vhd