Ignore:
Timestamp:
01/27/11 17:10:41 (14 years ago)
Author:
neise
Message:
jumper selectable MAC and IP address choice.
D_T7 jumper selects if in_can (no jumper) or not in cam(jumper set)
D_T6 jumper selects if in Dortmund (jumper set) or at ETHZ (jumper not set)
File:
1 edited

Legend:

Unmodified
Added
Removed

  • firmware/FAD/FACT_FAD_20MHz_VAR_PS/FACT_FAD_lib/hdl/fad_board.ucf.bak

    r10121 r10123  
    3535
    3636# BOARD ID  - inputs
    37 NET POSITION_ID<0> LOC  = Y1 | IOSTANDARD=LVCMOS33;             #ok  name was LINE befoer i changed it
    38 NET POSITION_ID<1> LOC  = Y2 | IOSTANDARD=LVCMOS33;             #ok
    39 NET POSITION_ID<2> LOC  = AB1 | IOSTANDARD=LVCMOS33;            #ok
    40 NET POSITION_ID<3> LOC  = AC1 | IOSTANDARD=LVCMOS33;            #ok
    41 NET POSITION_ID<4> LOC  = AD1 | IOSTANDARD=LVCMOS33;            #ok
    42 NET POSITION_ID<5> LOC  = AD2 | IOSTANDARD=LVCMOS33;            #ok
     37NET LINE<0> LOC  = Y1 | IOSTANDARD=LVCMOS33;            #ok 
     38NET LINE<1> LOC  = Y2 | IOSTANDARD=LVCMOS33;            #ok
     39NET LINE<2> LOC  = AB1 | IOSTANDARD=LVCMOS33;           #ok
     40NET LINE<3> LOC  = AC1 | IOSTANDARD=LVCMOS33;           #ok
     41NET LINE<4> LOC  = AD1 | IOSTANDARD=LVCMOS33;           #ok
     42NET LINE<5> LOC  = AD2 | IOSTANDARD=LVCMOS33;           #ok
    4343
    4444# W5300
    … …  
    9999
    100100NET SRIN LOC  = E1 | IOSTANDARD=LVCMOS25;                       #ok -- nur fuer vollauslese noetig; auf Z legen.
    101 #NET REFCLK LOC  = AC11 | IOSTANDARD=LVCMOS25;          #ok -- listen to REFCLK possible
     101NET REFCLK LOC  = AC11 | IOSTANDARD=LVCMOS25;           #ok -- listen to REFCLK possible
    102102
    103103
    … …  
    138138NET D_T<4> LOC  = K5 | IOSTANDARD=LVCMOS25;                     #ok
    139139NET D_T<5> LOC  = L4 | IOSTANDARD=LVCMOS25;                     #ok
    140 NET D_T<6> LOC  = M3 | IOSTANDARD=LVCMOS25;                     #ok
    141 NET D_T<7> LOC  = T3 | IOSTANDARD=LVCMOS25;                     #ok
     140#NET D_T_in<0> LOC  = M3 | IOSTANDARD=LVCMOS25 | pullup;                        #ok was: NET D_T<6> LOC  = M3
     141#NET D_T_in<1> LOC  = T3 | IOSTANDARD=LVCMOS25 | pullup;                        #ok was: NET D_T<7> LOC  = T3
     142NET D_T<6> LOC  = M3 | IOSTANDARD=LVCMOS25 | pullup;                    #ok
     143NET D_T<7> LOC  = T3 | IOSTANDARD=LVCMOS25 | pullup;                    #ok
    142144NET D_T2<0> LOC  = U2 | IOSTANDARD=LVCMOS25;                    #ok  was D_T<8>
    143145NET D_T2<1> LOC  = V2 | IOSTANDARD=LVCMOS25;                    #ok  was D_T<9>
Note: See TracChangeset for help on using the changeset viewer.