Index: /trunk/Mars/Changelog.10 =================================================================== --- /trunk/Mars/Changelog.10 (revision 10233) +++ /trunk/Mars/Changelog.10 (revision 10233) @@ -0,0 +1,1460 @@ +Please do not write behind the end of line tag so that it is possible +to send a Changelog file to a line printer directly. Thanks. + +For your entries please follow EXACTLY this style: + +_yyyy/mm/dd_[Your Name] +_ +___*_filename: +_____-_description +_ +___*_filename2, filename3: +_____-_description +_ +_ +_ + +While an underscore is a placeholder for a white-space or an empty line. + + -*-*- END OF LINE -*-*- + + 2010/11/29 Reiner Rohlfs + + * msim/MPhotonData.cc: + - Use all data if telescope array is not defined + + * msim/MPhotonEvent.[h,cc]: + - remove following methods: + Int_t ReadCorsikaEvt(MCorsikaFormat *fInFormat, Int_t i); + Int_t ReadCorsikaEvt(istream &fin, Int_t i); + - replace those methods by + Int_t ReadEventIoEvt(MCorsikaFormat *fInFormat); + Int_t ReadCorsikaEvt(Float_t * data, Int_t numEvents, Int_t arrayIdx); + + * mcorsika/MCorsikaRunHeader.h mcorsika/MCorsikaRunHeader.cc + - Split method ReadEvtEnd() into two functions: + ReadEvtEnd() and ReadEventHeader() + + * mcorsika/MCorsikaEvtHeader.[h,cc]: + - method ReadEvt does not read data from file by itself, but gets + buffer as input + - test that number of reuse of same shour is not greater than 20 + - method ReadEvtEnd does not seek to the EVTE block and does not + read the Bloch header any more. + + * mcorsika/MCorsikaFormat.[h,cc]: + - remove following methods: + SeekNextBlock(), UnreadLastHeader(), UnreadLastData(), StorePos(), + ResetPos(), Rewind(), GetNextEvent(), GetCurrPos(), + NextEventObject() and NextPhotonObject() + - new method: NextBlock() + + * mcorsika/MCorsikaRead.[h,cc]: + - new design of program flow. It is now determined by the order of + the data blocks in the input file. + - Depending on the variables fTelescopeIdx and fArrayIdx, only data + of the requested telescope and array are stored in the output + file. + + * readcorsika.cc: + - two new command line arguments: -A=arrayNo and -T=telescopeNo + The values of these parameters are store in the MCorsikaRead - + class. + + + 2010/11/22 Thomas Bretz + + * Makefile.rules: + - use -C option of make instead of cd + + * msimreflector/MSimRays.cc: + - added some comments + - fixed timing for a point source + + * mbase/MStatusDisplay.cc: + - display canvas title in status line + + * mhbase/MH3.[h,cc]: + - added scaling for fourth (time) axis + + + + 2010/11/03 Daniela Dorner + + * datacenter/scripts/copyoutput: + - changed query so that only successfully processed files are + copied + - removed logging output to use script in cronjob in Dortmund + + + + 2010/10/28 Thomas Bretz + + * mjobs/MJCuts.cc: + - improved debug output in WriteResults + + * mjobs/MJob.cc: + - imporved searching for an open file in WriteContainer + + + + 2010/10/28 Daniela Dorner + + * datacenter/scripts/writemcsequencefile: + - bug fix (every run was listed several times) + + + + 2010/10/27 Daniela Dorner + + * datacenter/scripts/jobmanager: + - imlemented new algorithm / rewritten + - queries status of queue less often + - one can select algorithm to determine number of jobs to be + submitted + - one can submit more than one job at the same time + - no waiting time between scripts, but only between loops number of + jobs + - number of jobs for steps is not given absolute anymore, but in a + ratio + - maximum number of jobs for one step can be given + + * datacenter/scripts/setup.phido.fact.mc, + datacenter/scripts/setup.wue.fact.mc: + - adapted variables for settings of jobmanager to implement the new + algorithm + + * datacenter/scripts/runstar_mc, datacenter/scripts/runcallisto_mc + datacenter/scripts/runceres, datacenter/scripts/runcorsika, + datacenter/scripts/sourcefile: + - implemented usage of lock in db instead of function checklock + which uses lock-file + - in sourcefile: adapted function setstatus to take care of locking + + * datacenter/scripts/run.condor: + - adapted to allow submission of several jobs with one submit + + * datacenter/scripts/copyoutput: + - included output of info if nothing has to be copied + + + + 2010/10/19 Daniela Dorner + + * datacenter/scripts/insertmc: + - added reminder to start writemcsequencefile + + * datacenter/scripts/writemcsequencefile: + - added check if there are runs in the DB + + + + 2010/10/18 Daniela Dorner + + * datacenter/db/menu.php, datacenter/db/mcdefs.php: + - added number of events to include the difference between number + of showers and number of events introduced by implementing + fNumReUseShowers + + * datacenter/db/include.php, datacenter/db/mcinfo.php: + - added 'done and avail' to status pull-down + - added 'done and avail' to status group-by + + * datacenter/scripts/insertmc: + - added fAvailable + - new values for numfile with CSCAT 20 + + * datacenter/scripts/jobmanager: + - updated setting for pbs + + * datacenter/scripts/setup.phido.fact.mc: + - added setup for copying + + * datacenter/scripts/copyoutput: + - added (script to copy output from one site to the main site, + currently working and used for copying corsika files from + Dortmund to Wuerzburg + + + + 2010/10/06 Daniela Dorner + + * datacenter/scripts/sourcefile: + - updated status queries to implemented new DB columns fAvailable + and fProcessingSiteKEY for the status tables to allow for storing + the information where the process is/was running and whether it + is already available in the main data center, i.e. whether it has + been already copied + This ensures that the next step is only started when the job is + done AND the file is available + + * datacenter/scripts/setup.wue.fact.mc, + datacenter/scripts/setup.phido.fact.mc: + - implemented variables for the processing and main data center + site + + + + 2010/10/05 Daniela Dorner + + * datacenter/scripts/jobmanager: + - implemented pbs as third queueing system: implemented variable + $SOURCEFILEPATH as pbs copies script locally; implemented + walltime and mem + + * datacenter/scripts/setup.phido.fact.mc: + - added (setup file for cluster in Dortmund); includes array for + walltime and mem + + * datacenter/scripts/runcorsika, datacenter/scripts/sourcefile: + - implemented variable $SOURCEFILEPATH + + * datacenter/db/menu.php, datacenter/db/mcdefs.php, + datacenter/scripts/runcorsika, datacenter/scripts/insertmc: + - implemented fNumReUseShowers (parameter how often a shower is + reused in Corsika) + + + + 2010/09/30 Thomas Bretz + + * msimreflector/MMirrorSquare.[h,cc]: + - implemented WriteM + + * mcorsika/MCorsikaEvtHeader.cc, mcorsika/MCorsikaFormat.[h,cc], + mcorsika/MCorsikaRunHeader.cc: + - fixed a problem with reading the RUNE section in corsikas + raw format + + * readcorsika.cc: + - speed up reading by ot printing the single photons if debug + level less than 3 + + * msim/MPhotonEvent.cc: + - don't loop over all (mostly empty) slots in Print() + + * msimcamera/MSimRandomPhotons.[h,cc]: + - changed again the checks to also allow pedestal and calibration + runs to be produced without having a MCorsikaRunHeader available + + + + 2010/09/29 Thomas Bretz + + * msimreflector/MMirrorHex.[h,cc]: + - implemented WriteM + - implemented new class MMirrorHex90 + + * msimreflector/SimReflectorLinkDef.h: + - added MMirrorHex90 + + * msimreflector/MMirrorDisk.[h,cc]: + - implemented WriteM + + * msimreflector/MReflector.[h,cc]: + - added function to write a file with a reflector definition + + * msimreflector/MMirror.h: + - added virtual WriteM + - added several Getter for Z, Nx, Ny, Nz and Shape + + + + 2010/09/28 Thomas Bretz + + * mcorsika/MCorsikaFormat.[h,cc]: + - added Read function to allow MCorsikaRead to read + object 1203 + - added Rewind function to allow MCorsikaRead to jump back + in file + - added a lot of debug output + - make GetNextEvent read one telescope data from one array after + the other + + * mcorsika/MCorsikaEvtHeader.h: + - added AddXY which allows MCorsikaRead to add the telescope + position to the showers impact parameter + + * mcorsika/MCorsikaRead.[h,cc]: + - commented out obsolete use of fIn + - added reading of telescope positions (object 1201) in + eventio format + - added number of telescopes to the calculation of the + total number of events + - added a working ReadEvent for eventio format + - added ReadEnv to be able to set the requested telscope index + - added new data members to hold the telescope positions + - removed obsolete OpenStream + - added member function to set telescope index + + * msim/MHPhotonEvent.cc: + - changed the number of bins to an odd value to get a bin at zero + for the 2D histograms + + + + 2010/09/24 Thomas Bretz + + * mcorsika/MCorsikaEvtHeader.cc: + - store impact parameters persistent for further use (because in + eventio format the header is not repeated this is needed) + + * mcorsika/MCorsikaFormat.[h,cc]: + - adapted to be able to read all telescopes and all reused shower + events in eventio + - a lot of cosmetics + - many more comments + - PRELIMINARY + + * mcorsika/MCorsikaRead.[h,cc]: + - implemented variable for selection of the telescope in eventio format + - implemented eventio format (PRELIMINARY) + + * msim/MPhotonData.[h,cc], msim/MPhotonEvent.[h,cc]: + - implemented function to calculate mean event time + - implemented function to simulate the wavelength (lambda^-2) + - implemented function to shift all photons by a certain xy + - adapted ReadCorsikaEvt to changes in MCorsikaFormat + + + + 2010/09/24 Daniela Dorner + + * datacenter/scripts/insertmc: + - fixed typo + + + + 2010/09/22 Thomas Bretz + + * mjobs/MJSimulation.cc: + - slight improvement of debug output + - call SetAllowEmpty for the three ContEmpty filters + - changed binning of camera histograms + + * msimcamera/MSimRandomPhotons.cc: + - improved output in case of failure + + * readcorsika.cc: + - added RunHeaders + - fixed usage-info + + * mbase/MContinue.cc: + - no need to call MTask::GetFilter(), GetFilter() is enough + + * mfbase/MF.cc: + - accept = as a conditional sign + - make sure the return code of the evaluated filter is corectly returned + + * msim/MHPhotonEvent.cc: + - implemented types 6-8 + + * mcorsika/MCorsikaEvtHeader.[h,cc]: + - added fNumReuse + - added member functions to increase and reset the number of reusages + - increased class version number accordingly + + * mcorsika/MCorsikaRead.[h,cc]: + - count the number of showers (events) times its reusage + for fNumTotalEvents + - adapted ReadEvent to re-usage of showers (still needs to be tested for + EventIO) + - Fixed return type (should be Int_t) of ReadEvent + - take the number of reusages in PostProcess into account + + * mcorsika/MCorsikaRunHeader.[h,cc]: + - added total number of reusages fNumReuse + - increased class version number accordingly + + * mmc/MMcEvt.hxx: + - added setter for the reuse counter + + * msim/MPhotonData.[h,cc]: + - removed fNumPhotons (we allow 1-photon bunches only anyway and MMCS + doesn't even distribute this number) + - increased class version number accordingly + + * msim/MSimMMCS.cc: + - correctly propagate the number of events (number of showers times reusage) + - propagate counter for reusage to MMcEvt + + * msim/MPhotonEvent.[h,cc]: + - added functions to calculate mean x and mean y + - propagate re-usage counter through ReadEvent + + * mcorsika/MCorsikaFormat.[h,cc]: + - a few clean-ups to the code + - added standard file header + - a few minor simplifications + - replaced local logging stream with gLog + - added some empty comments + + + + 2010/09/21 Thomas Bretz + + * mjobs/MJSimulation.cc: + - correctly propagated run-number to the file-name + - fixed a problem with the tab-title in the ps-files + - fixed the histogram size for the camera (should be 5 instead + of 3, I hope) + - fixed the tab-title for the MedDev tab + - do not write image-files in dev-null mode + + + + 2010/09/14 Daniela Dorner + + * datacenter/scripts/runcorsika: + - removed STEPFC from inputcard as anyhow default of 1 was used + instead of 0.1 + + + + 2010/09/06 Thomas Bretz + + * msimreflector/MSimRays.cc: + - included TMath for newer root versions + + + + 2010/09/03 Daniela Dorner + + * datacenter/scripts/insertmc: + - added new standard setup runs + + * datacenter/scripts/runceres: + - fixed queries for change from file based to run based processing + + * datacenter/scripts/runcallisto_mc: + - changed setup path: implemented ceres setup, as different + callisto.rc are needed for different ceres setup + + + + 2010/08/31 Thomas Bretz + + * msimcamera/MSimRandomPhotons.[h,cc]: + - improved the range checks. All ranges are now aligned on the + range of simulated wavlengths + + + + 2010/08/30 Daniela Dorner + + * datacenter/db/mcdefs.php: + - adapted joins for processing of ceres on run basis + + * datacenter/scripts/insertmc: + - bugfix for insert of rows for new ceres key(s) + + + + 2010/08/30 Thomas Bretz + + * mhist/MHCamera.cc: + - added options to display contents as int and float + + * mgeom/MGeomCamFACT.cc: + - changed default distance from 4.8887 to 4.90 + + * mbase/MLut.cc: + - added possibility to have comment (ignored) lines + + * msim/MHPhotonEvent.cc: + - fixed Type==5 + + * msimreflector/MSimRays.[h,cc]: + - added + + * msimreflector/SimReflectorLinkDef.h + - added MSimRays + + * msimreflector/Makefile + - added MSimRays + + + + 2010/08/27 Daniela Dorner + + * datacenter/scripts/insertmc: + - updated some default values + + * datacenter/scripts/runceres, datacenter/scripts/insertmc, + resources/step_fact.rc: + - changed processing of ceres from file- to run-basis + + + + 2010/08/26 Daniela Dorner + + * datacenter/db/mcinfo.php: + - implemented status 'crashed' also for display of list of runs + + * datacenter/db/mcdefs.php, datacenter/db/menu.php: + - implemented CeresSetupKEY for mcinfo.php + + + + 2010/08/26 Reiner Rohlfs + + * mcorsika/MCorsikaFormat.[h,cc] + - fixed a problem in comparing fRunePos with position 0 + + + + 2010/08/25 Thomas Bretz + + * mjtrain/MJTrainCuts.cc: + - fixed the SetDrawOption for the 2D histogram + + + + 2010/08/24 Thomas Bretz + + * mjtrain/MJTrainCuts.cc: + - removed the SetDrawOption from the 1D histogram + + + + 2010/08/24 Reiner Rohlfs + + * mcorsika/MCorsikaFormat.[h,cc] + - in method MCorsikaFormatEventIO::SeekEvtEnd() the RUNE block + is first searched at the end of the file. It it is not found + the whole file is scanned for the RUNE block. Once it is + found it can be accessed directly at the next call of this + function. + + + + 2010/08/20 Daniela Dorner + + * datacenter/scripts/sourcefile: + - bugfix in query for influenced steps + + + + 2010/08/19 Thomas Bretz + + * mjobs/MSequence.cc: + - fixed treatment of file number 0 in InflateFileName and + PrintRuns + + + + 2010/08/17 Thomas Bretz + + * resmc/fact-trigger-sum.txt, resmc/fact-trigger-all.txt, + macros/fact/fact_trigger.C: + - added + + + + 2010/08/17 Daniela Dorner + + * datacenter/scripts/insertmc: + - added (script to insert mc runs and sequences to the FACT MC DB) + + + + 2010/08/16 Thomas Bretz + + * mgeom/GeomLinkDef.h, mgeom/Makefile: + - added MGeomCamFACT + + * mgeom/MGeomCamFACT.[h,cc]: + - added + + * mgeom/MGeomCamDwarf.[h,cc], mgeom/MGeomPix.[h,cc]: + - moved CalcXY to MGeomPix + - removed obsolete includes + + * mgeom/MGeomCamFact.cc: + - removed obsolete includes + + * mranforest/MRanForestCalc.h: + - added new function Train which either calls TrainRegression + or TrainSingleRF + + * mranforest/MHRanForestGini.cc: + - improved display + + * mfileio/MReadMarsFile.cc: + - evaluate return code of fRun->Process() + - print return code in case of failure + + * mjoptim/MJOptimizeBase.[h,cc]: + - improved existing comments + - added a full class description + - print a warning if TRandom is used a random number generator + + * mtools/MTFillMatrix.cc: + - improved handling of negative number of events + + * mjtrain/MJTrainSeparation.cc: + - added names to test- and train-dataset for storage + + * mjtrain/TrainLinkDef.h, mjtrain/Makefile: + - added MJTrainCuts + + * macros/train/traincuts.C: + - added + + * mpointing/MPointingDevCalc.cc: + - added a comment about the last lut update + + + + 2010/08/13 Thomas Bretz + + * mimage/MHHillasExt.[h,cc]: + - added new histograms to display new variables + - increased class version number + + * mimage/MHillasExt.cc: + - fixed claculation of the weighted time spreads + - fixed a bug in the calculation of the third moments! + + * mhist/MHHadronness.cc: + - fixed min/max of the intgral histogram + + * mfbase/MFEventSelector.cc: + - if the number of events to be selected is negative select all events + + * mhbase/MHn.[h,cc]: + - fixed the complex display for five histograms + + * mhbase/MHn.[h,cc], mhbase/MH3.[h,cc]: + - implemented a TProfile3D + - implemented an option to skip reset of the histograms in a new + eventloop + + * mhbase/MH3.[h,cc]: + - moved the addition weight to a new data meber fWeight + - increased class version number + + + + 2010/08/13 Daniela Dorner + + * datacenter/scripts/sourcefile: + - implemented faster queries for the dependencies of the steps + - simplified code + - introduced new level for printprocesslog: DEBUG + + * resources/steps_fact.rc: + - adapted to change in queries in sourcefile + + + + 2010/08/12 Thomas Bretz + + * mimage/MHillasExt.[h,cc]: + - added Getter for fSlope* + - added new data members to Print() output + - adapted Set() member function + - fixed code for calculating weighted spreads + - added new data members to Clear function + + * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHNewImagePar.cc, + mimage/MHVsSize.cc, mimage/MHHillasSrc.cc, mimage/MHImagePar.cc, + mhcalib/MHGausEvents.cc, mhflux/MHThetaSq.cc, mhflux/MHAlpha.cc, + mhflux/MHFalseSource.cc, mhflux/MHEffectiveOnTime.cc, + mhflux/MHCollectionArea.cc, mhflux/MHThetaSqN.cc, mhflux/MHDisp.cc, + mhflux/MHThreshold.cc, mhflux/MHEnergyEst.cc, mjtrain/MJTrainDisp.cc, + mtools/MHSimulatedAnnealing.cc, mmuon/MHSingleMuon.cc, + mmuon/MHMuonPar.cc, mpointing/MHSrcPosCam.cc, + mpedestal/MHPedestalCor.cc, mhist/MHCamEventRot.cc, + mhist/MHStarMap.cc, mjobs/MJSpectrum.cc, mbadpixels/MHBadPixels.cc, + mfbase/MFEventSelector2.cc, mhbase/MBinning.cc, mhbase/MH.[h,cc], + mhbase/MH3.cc, mhbase/MHMatrix.cc, msim/MHPhotonEvent.cc: + - changes MH::SetBinning and similar functions to take references + instead of pointers + - for the time being wrappers are kept not to break macros + + + + 2010/08/11 Thomas Bretz + + * mhbase/MH3.[h,cc]: + - added another type to be able to setup a standard profile and + one which display the spread as error + - improved/fixed error calculation/display + + * mimage/MHillasExt.[h,cc]: + - added new data members fTimeSpread and fTimeSpreadWeighted + - added new data members fSlopeSpread and fSlopeSpreadWeighted + - implemented code to calculate the time spreads and slope spreads + - increased class version id by 1 + + * mjtrain/TrainLinkDef.h: + - added MJTrainImpact + + * mjtrain/MJTrainImpact.[h,cc]: + - added + + * mjtrain/MJTrainEnergy.h: + - added SetTrainExpSize member function + + * mjtrain/MJTrainDisp.cc: + - made the display of the cut-lines a bit more flexible + - slightly changed the meaning of the plots + + + + 2010/08/10 Thomas Bretz + + * msim/MPhotonData.cc: + - fixed two warnings in FillEventIO (implicit conversion + from float to int) + + * mhbase/MHn.[h,cc]: + - added SetConversion to allow for setting a conversion function + + * mhbase/MH3.[h,cc]: + - added conversion function for displaying the histogram + - added new data member fConversion + - added new member functions Convert and SetConversion + - implemented conversion before displaying + + * mjtrain/MJTrainEnergy.cc: + - display resolution directly (sqrt) + - changed default binning + - don't use build in conversion from mm to degree but + MGeomCam.fConvMm2Deg instead. + + * Makefile.rules: + - replaced cvs by svn in diff + + * mjtrain/MJTrainDisp.cc: + - don't use build in conversion from mm to degree but + MGeomCam.fConvMm2Deg instead. + + + + 2010/08/06 Thomas Bretz + + * msimcamera/MSimCamera.[h,cc]: + - added the possibility to set an overall baseline, baseline-noise + and gain. + + * ceres.rc: + - added entries for the new values + + + + 2010/07/28 Daniela Dorner + + * datacenter/db/menu.php: + - updated initial parameter selection for mcinfo.php + - changed table for GetMin/Max to CeresInfo + + * datacenter/db/mcinfo.php: + - bugfix for removing WHERE or AND at end of queries + - added fStopTime to status-column in case of failure + - bugfix for correct joins in case of group-by + + * datacenter/db/mcdefs.php: + - updated runtime of ceres + - updated joins for status tables + + * datacenter/scripts/insertmc: + - added (script to add runs to the database) + + * datacenter/scripts/runcorsika: + - added check if 'END OF FILE' is contained in logfile + - added check if file number > 999 and change filename if it is + + * datacenter/scripts/setup.wue.fact.mc: + - removed cprun + - added callisto and star in scripts-array + + * datacenter/scripts/sourcefile: + - removed variables for fProgramId + + * resources/steps_fact.rc: + - added missing needs + + + + 2010/07/23 Reiner Rohlfs + + * mcorsika/MCorsikaFormat.[h,cc] + - new files + All the differences between EventIo files and coriska files + are implemented in these files. + + * mcoriska/MCorsikaRead.[h,cc] + - the file handler fIn is replaced by the MCorsikaFormat class. + - every access to the input file is replaces by calling + methods of MCorsikaFormat. + + * mcoriska/MCorsikaRunHeader.[h,cc] + - the file handler fIn is replaced by the MCorsikaFormat class. + - every access to the input file is replaces by calling + methods of MCorsikaFormat. + + * mcoriska/MCorsikaEvtHeader.[h,cc] + - the file handler fIn is replaced by the MCorsikaFormat class. + - every access to the input file is replaces by calling + methods of MCorsikaFormat. + + * msim/MPhotonEvent.cc + - method ReadCorsikaEvt distinguish between Corsika and EventIo + input files and calls either FillEventIO() or FillCorsika(). + + * msim/MPhotonData.[h,cc] + - new method: FillEventIO, which is similar as FillCorsika + + + 2010/07/09 Thomas Bretz + + * mpointing/MSrcPosCam.[h,cc]: + - now the particle position is stored in any case in the headers + so in case we have a view cone we must keep the position fixed + - added the fix for the MC monte carlos (for them X needs to + change its sign due to a bug in the reflector program) + + * mars.rc, star.rc: + - changed time contraint in cleaning from aboslute values + to relative values (units now ns/deg) + + * mimage/MImgCleanStd.cc: + - changed time contraint in cleaning from aboslute values + to relative values (units now ns/deg) + + + + 2010/07/07 Daniela Dorner + + * datacenter/scripts/runceres: + - fixed typo + + + + 2010/07/06 Daniela Dorner + + * datacenter/scripts/runstar_mc: + - fixed typo + - added inpath to command line + + + + 2010/07/05 Daniela Dorner + + * datacenter/scripts/runceres: + - added path for C and P run (was not the same like for D run) + + * datacenter/scripts/sourcefile: + - fixed joins in subquerypart() + + * datacenter/scripts/runcallisto_mc: + - added inpath to command line + + * datacenter/db/mcinfo.php: + - removed FailMenu + - fixed bug (group by did not work in case statusvalue was not + selected) + + * datacenter/db/mcdefs.php: + - removed FailMenu columns + + + + 2010/07/05 Thomas Bretz + + * mraw/MRawRunHeader.h: + - added missing SetFileNumber + + * mjobs/MSequence.cc: + - added the missing file number to teh MC file names + + * msimcamera/MSimCalibrationSignal.h: + - changed virtual file name from 000000 to 000001 to force file + number to be 1. + + * mjobs/MJSimulation.[h,cc]: + - added run-number to ceres.root filename + + + + 2010/07/02 Daniela Dorner + + * datacenter/scripts/runcorsika: + - removed $com + - updated logging + + * datacenter/scripts/runceres: + - fixed path + - added error handling + + * resources/steps_fact.rc: + - update joins to new scheme to include further steps in the chain + + * datacenter/scripts/sourcefile: + - adapted queries to new scheme of joins + + * datacenter/scripts/runstar_mc: + - added (script to run star for mc) + + + + 2010/07/02 Daniela Dorner, Christian Farnier + + * datacenter/scripts/runcallisto_mc: + - added (script to callibrate mc) + + + + 2010/06/30 Daniela Dorner + + * datacenter/db/mcinfo.php: + - added output to step column in case job is running + - fixed typo + + * datacenter/scripts/runcorsika: + - small bugfix (new version of 'cut' gives error for '-c 0-4') + + * datacenter/scripts/runceres: + - added (script to run telescope simulation of file basis) + + * datacenter/scripts/setup.wue.magic.data, + datacenter/scripts/setup.wue.magic.mc, + datacenter/scripts/setup.wue.fact.mc: + - added condorpath + + * datacenter/scripts/jobmanager, + datacenter/scripts/scriptlauncher: + - implemented condorpath + + * datacenter/scripts/sourcefile: + - changed log and error file name for jobmanager + + * resources/steps_fact.rc: + - fixed typo + + + + 2010/06/29 Daniela Dorner + + * datacenter/db/mcinfo.php: + - added duration to step column in case of 'failed' and 'done' + + + + 2010/06/28 Daniela Dorner + + * datacenter/db/include.php: + - adapted status query for new db layout + + * datacenter/db/menu.php: + - added and exchanged menu points and init elements for the new + layout of the FACT mc db + - bugfix that menu items can be switched off + + * datacenter/db/mcinfo.php: + - adapted the queries for the new layout of the FACT mc db + (different table names, structures and content) + - adapted query for the status group by + + * datacenter/db/mcdefs.php: + - adapted the arrays for the new layout of the FACT mc db + + + + 2010/06/28 Thomas Bretz + + * mbase/MStatusDisplay.cc: + - Status displays where stored as MStatusArray instead of + MStatusDisplay + - Read now also can read other StatusDisplays if a key is found in + the file + + + + 2010/06/25 Thomas Bretz + + * mjobs/MJSimulation.[h,cc]: + - added data member fRunNumber + - changed the rules to create the output file names + - set default run-numbers for different run-ytpes + - apply run-number + - added IntendedPulsePosition to output + + * mraw/MRawRunHeader.h: + - added SetFileNumber member function + + + + 2010/06/24 Thomas Bretz + + * mgeom/MGeomCam.h: + - call constructor of base class in copy-constructor + + * mhbase/MH.h: + - remove argument name where obsolete + + * mjobs/MJSimulation.cc: + - fixed some axis labels + + * msimreflector/MMirrorDisk.cc: + - changed interpretation from file from radius to diameter + + * ceres.cc: + - added option --run-number + + * showplot.cc: + - set default palette to pretty palette + + * mcorsika/MCorsikaRunHeader.h: + - added getter for ViewConeInnerAngle + + * mmc/MMcCorsikaRunHeader.h: + - added HasViewCone + - added SetViewCone + + * mmc/MMcEvt.[hxx,cxx], mmc/MMcEvtBasic.[h,cc]: + - moved fPhi and fTheta from MMcEvt to MMcEvtBasic + - increased class version number accordingly + - moved setter + - moved getter + - adapted Clean() + - adapter copy-constructor + + * mpointing/MPointingDevCalc.cc: + - added some comments + + * msim/MSimMMCS.cc: + - transfer view cone data + - set run-info (run/file-number) according to new scheme + - always set MMcEvt::fPhi/fTheta to particle direction + + + + 2010/06/24 Daniela Dorner + + * datacenter/scripts/sourcefile, resources/steps_fact.rc: + - bugfixes: changed joins to get correct queries for all cases + + * datacenter/scripts/setup.wue.fact.mc: + - changed path for setup files + - added runceres to jobmanager settings + + + + 2010/06/22 Daniela Dorner + + * datacenter/scripts/writemcsequencefile: + - improved logging + + * datacenter/scripts/sourcefile: + - adapted greps in rc-files to grep only lines which are no + comments + + + + 2010/06/17 Daniela Dorner + + * resources/steps_fact.rc: + - removed step CPRun + - split 'Joins' to 'Joins' and 'SpecialJoins' depending on + whether the join is with a different table + + * datacenter/scripts/sourcefile: + - bugfix in query + - included new type of join from steps.rc + - added comments + + + + 2010/06/16 Daniela Dorner + + * resources/steps_fact.rc: + - removed step CPRun + - added step SequenceFile + + * datacenter/scripts/setup.wue.fact.mc: + - added path for mc sequences + + * datacenter/scripts/writemcsequencefile: + - added (script to write mc sequencefiles) + + + + 2010/06/15 Daniela Dorner + + * resources/steps_fact.rc: + - added (file containing the dependencies for the steps of the + automatic production of MC for FACT) + + + + 2010/06/14 Daniela Dorner + + * datacenter/scripts/sourcefile: + - bugfix in query + + * datacenter/scripts/runcorsika: + - added output of command to processlog + + * datacenter/scripts/setup.wue.fact.mc: + - changed setup to be used by user montecarlo to reproduce some + corsikas + + + + 2010/06/11 Daniela Dorner + + * datacenter/scripts/sourcefile: + - changed functions and queries to new db layout + - added functions to get values from steps.rc + - new function for part of query which is identical for the + functions getstatus() and gettodo() + - removed $reset (was only needed for MerppUpdate) + - improved and added comments + + * datacenter/scripts/jobmanager: + - implemented changes for new db layout + - fix in function nextscript(): wrong variable was used + + * datacenter/scripts/runcorsika: + - implemented changes for new db layout + - merged uncommitted changes of Thomas Bretz + - Observatory values and atmosphere now read from DB + - implemented new seeds + - removed $reused + - wavelength range now read from DB + + * datacenter/scripts/setup.wue.fact.mc: + - added (setup for fact mc production) + + + + 2010/06/11 Stefan Ruegamer + + * mjobs/MJSpectrum.cc + - corrected the flux of the published MAGIC spectrum + + + + 2010/06/03 Thomas Bretz + + * mranforest/MRanForestCalc.cc: + - added stdlib.h to make Dominik happy ;) + + + + 2010/05/05 Thomas Bretz + + * mastro/MAstro.cc: + - fixed AngularDistance (called a non existing function and + the compiler didn't complain) + + * mbase/MParContainer.[h,cc]: + - added static function Overwrites (previously in MTask) + + * mbase/MStatusDisplay.[h,cc]: + - allow writing a MStatusDisplay without writing a MStatusArray + (therefore added SeveAsPlainRoot) + - improved reading of files just containing canvases and objects + + * mbase/MTask.[h,cc]: + - moved code from Overwrites to a static function in MParContainer + + * msimcamera/MSimCalibrationSignal.cc: + - changed distribution of signal from Gauss to Poissonian + + * showplot.cc: + - removed nonsense "-q" option + + * mbase/MStatusArray.[h,cc]: + - fixed/improved (once again) deleting of the array + + * mbase/MStatusDisplay.cc: + - removed the MAstroCatalog workaround - is it still necessary? + (needs testing) + - added UpdateMemory every here and there to get the memory + consumption is more circumstances + + + + 2010/04/22 Thomas Bretz + + * showplot.cc: + - added --debug-mem option + + * mbase/MParSpline.cc, mhbase/MH3.cc, mhbase/MHn.cc, + mhflux/MHAlpha.cc, mhist/MHCamEvent.cc: + - added missing call to the RecursiveRemove of the base class + + * mfileio/MReadTree.cc: + - In the case Notify failed since about two years accidentaly + kTRUE instead of kERROR was returned + + * mfileio/MWriteRootFile.cc: + - added some more debug output + + * mhflux/MAlphaFitter.cc: + - Return if fit failed + + * mhflux/MHPhi.cc: + - avoid inf and nan when producing histogram (the divisor could + have been zero in case of the inetgral of an empty histogram) + + + + 2010/04/21 Thomas Bretz + + * macros/rootlogon.C: + - a small fix which gets rid of the annoying error about an + unlocked mutex when starting the MStatusDisplay in the + interpreter. It makes sure that fGThreadFactory gets initialized + from the main thread. + + * mbase/MStatusDisplay.cc: + - added a console output if TryLock fails + - the return value of TString::Index was misinterpreted + + * mmuon/MHSingleMuon.cc: + - removed another reference to gMinuit + + * msimcamera/MSimRandomPhotons.cc: + - re-did the output + - choose the other rate f2 instead of f1 + + * msimcamera/MSimTrigger.[h,cc]: + - keep the index of the trigger channel which finnaly issued + the trigger and propagate it to the event header + + * mraw/MrawEvtHeader.h: + - implementd setter for fNumTriggerLvl1 + + + + 2010/04/20 Thomas Bretz + + * mfileio/MReadTree.cc: + - no error was returned anymore when Notify() failed. Fixed. + + + + 2010/04/19 Thomas Bretz + + * mbase/MStatusArray.cc: + - added a workaround to prevent crashes in case of double + deleteion of the fHistogram in TGraphs + + * mcorsika/MCorsikaEvtHeader.cc: + - replaced special characters by UTF8 characters + + * mgeom/MGeom.[h,cc]: + - implemented function to return the distance squared + + * mjobs/MJSimulation.cc: + - display degree symbol correctly in plots + - added artificial star-files to output + - for the moment the output of the reflector files is suppressed + + * mmuon/MHSingleMuon.cc: + - catch if the fit failed + - replaced use of gMinuit by direct access to the function + + * mpointing/MPointing.cc: + - replaced deg-symbol by UTF8 character + + * mpointing/MPointingDevCalc.cc: + - added more information + + * msignal/MSignalCam.[h,cc]: + - made the data members describing the image persistent. + they are not guranteed to have correct contents. Use + MNewImagePar instead. + - increased class version number accordingly + + * msimreflector/MMirrorHex.h: + - added Getter for fD + + + + 2010/04/13 Daniela Dorner + + * datacenter/db/builddatasets.php: + - updated check for observation mode: allowed 'N/A', as there is + else an error for old data + + + + 2010/04/13 Thomas Bretz + + * msim/MHPhotonEvent.cc: + - automatic binning for case 3 + - new case 5 + + * msim/MHPhotonEvent.h: + - this can be a huge memory consumption and we don't need double + precision (range) accordingly changed all TH*D to TH*F. + consequently increased class version number + + + + 2010/03/30 Thomas Bretz + + * Makefile.conf.general: + - moved ARCHDEFS from DEFINES to CXXFLAGS otherwise it might get + ignored + + * mbase/MQuaternion.h: + - added member-function to normalize vector part of quaternion + + * mbase/MTime.cc: + - issue an error if __LINUX__ is not set + + * mjobs/MJSimulation.cc: + - set name of reflector explicitly to "Reflector" + + * msimreflector/MMirror.h: + - added member function to set z position (for optimization purpose) + - added SimPSF(TVector3&) + + * msimreflector/MSimReflector.[h,cc]: + - added name of reflector as data member + + * melectronics/MAvalanchePhotoDiode.cc: + - scale the crosstalk probability as the height of the emitted + signal with the recovery time. + + * mhflux/MHEnergyEst.cc: + - added a workaround to get rid of some root-warnings + + * mjtrain/MJTrainEnergy.cc: + - improved axis labels + + * mpointing/MPointingDevCalc.cc: + - added some more comments + + * msimreflector/MMirror.[h,cc]: + - added fShape to allow for parabolic mirrors + + * msimreflector/MReflector.cc: + - implemented the option of parabolic mirrors into the + reflector defintion file + + * msimreflector/MSimReflector.[h,cc]: + - implemented (and fixed) the calculation of the reflection at + parabolic surfaces + - implemented the possibility to switch off the early check for + "photon can hit the camera" (fDetectorMargin<0) + - added setter for fDetectorMargin + + + + + 2010/03/01 Stefan Ruegamer + + * resources/hilocalib.rc: + - added df factors for p23-25, using the same as for p22. Sequences + are not running with df in these periods, therefore the correct + factors cannot be determined, and it doesn't matter anyway. + + * datacenter/read_lapalma-tapes: + - added automationsetup before movingrawfiles + + + + 2010/02/23 Thomas Bretz + + * mbase/MAGIC.cc: + - projections are supposed to work again in root 5.26 + (not tested yet) + + * mbase/MGMap.cc, mbase/MObjLookup.cc: + - key and val are Long64 in newer root versions + + * mdata/MDataPhrase.cc: + - need inclusion of TFormulaPrimitive in root 5.26 + + * mhflux/MMcSpectrumWeight.cc: + - root 5.26 has a different calling convention for TH1::Intgeral + + * mjobs/MJob.cc: + - added a suggested parenthesis + + * mjtrain/MJTrainDisp.cc: + - cast the MH3 histogram correctly to a TH2 + + + + 2010/02/22 Daniela Dorner + + * datacenter/db/menu.php: + - added ObsLevel and download link column for cta pages + + * datacenter/db/ctadefs.php: + - added observation level + + * datacenter/db/ctamcinfo.php: + - added column with download link for the files + + * datacenter/db/builddatasets.php, datacenter/db/ctamcinfo.php, + datacenter/db/culminating.php, datacenter/db/datacheck.php, + datacenter/db/datasetinfo-aio.php, datacenter/db/ganymed.php, + datacenter/db/include.php, datacenter/db/mcinfo.php, + datacenter/db/opticaldata.php, datacenter/db/printtable.php, + datacenter/db/queryrbk.php, datacenter/db/runinfo-aio.php, + datacenter/db/sequence.php, datacenter/db/sequinfo-aio.php, + datacenter/db/sources.php, datacenter/db/statussbs.php: + - bugfix for get.txt + + * datacenter/db/datasetinfo-aio.php: + - bugfix calling PrintPage() + + + + 2010/02/01 Daniela Dorner + + * datacenter/scripts/fillmcdb: + - added observation level + + * datacenter/scripts/sourcefile: + - added comment concerning $0 problem + - added 'ERROR' in processlog message of makedir + + + + 2010/02/04 Stefan Ruegamer + + * mraw/MRawRunHeader.cc + - changed GetTypeID()!=fTelescopeNumber*10U+5U to GetTypeID()!=5U + so that the new 5xxxxxx sequences can be processed + - adapted error message + - inserted Domino calibration run + + * mraw/MRawRunHeader.cc + - inserted Domino calibration run + + + + 2010/02/01 Daniela Dorner + + * datacenter/scripts/runsimtel + - fixes typo + - replaced path in disk-check by variable + + + + 2010/01/15 Stefan Ruegamer + + * datacenter/scripts/dowebplots, jobmanager + - if-condition if [ "$numproc" = "" ] now correctly checks for "0" + + * datacenter/scripts/scriptlauncher + - added automationsetup variable in condor command + + * datacenter/macros/buildsequenceentries.C + - where necessary changed Int to Long to account for the high value + of the stereo runs + + * resources/sequences.rc + - added two transition conditions for the calibration scripts + 10Led_UV_PEDANDCAL_1kHz and 10LED_UV