Index: trunk/FACT++/ScriptsForDimCtrl/BlinkenLights
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/BlinkenLights	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/BlinkenLights	(revision 12680)
@@ -0,0 +1,24 @@
+# This is a general test for DimCtrl scripts
+# it will just let the LEDs in the FAD tab next to the buttons
+# 'Fits' and 'None' blink
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 1000
+FAD_CONTROL/SET_FILE_FORMAT 0
Index: trunk/FACT++/ScriptsForDimCtrl/Calib1024
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/Calib1024	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/Calib1024	(revision 12680)
@@ -0,0 +1,28 @@
+# This sript takes a DRS Calibration for data of ROI=1024
+# Making sure bias is off
+.! echo `date -u` "First DRS Calibration Script starting up..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "-------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FEEDBACK/ENABLE_OUTPUT 1
+BIAS_CONTROL/SET_ZERO_VOLTAGE
+.s BIAS_CONTROL 7
+FAD_CONTROL/START_DRS_CALIBRATION
+.! echo `date -u` "bias voltage is switched off" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking DRS:Gain 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-gain
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
Index: trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble1
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble1	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble1	(revision 12680)
@@ -0,0 +1,109 @@
+# Move Telescope to Wobble Position 1
+.! echo `date -u`  "Data Taking script for Crab Wobble 1 starting up... " >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u`  "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo
+.! echo `date -u`  "Operator: Move telescope to wobble Position 1" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u`  "Operator: Measure Sky Brightness" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u`  "... This script will wait 10sec for you to wobble" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.w 10000
+FEEDBACK/ENABLE_OUTPUT 1
+
+# Making sure bias is off
+BIAS_CONTROL/SET_ZERO_VOLTAGE
+.s BIAS_CONTROL 7
+FAD_CONTROL/START_DRS_CALIBRATION
+.! echo `date -u`  "bias voltage is switched off" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking DRS:Gain 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-gain
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking crosscheck DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FAD_CONTROL/SET_FILE_FORMAT 2
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking DRS:Time 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-time
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking Pedestal 1000 for secondary baseline..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FAD_CONTROL/RESET_SECONDARY_DRS_BASELINE
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking crosscheck DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FAD_CONTROL/SET_FILE_FORMAT 2
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "switching on bias ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+BIAS_CONTROL/SET_GLOBAL_DAC 1
+.s BIAS_CONTROL 9
+.s BIAS_CONTROL 5
+.s BIAS_CONTROL 9
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking Pedestal with BIAS on 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking External Light Pulser with BIAS on 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 light-pulser-ext
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+#Data Taking with Full Trigger Area (4x5min)
+
+.! echo `date -u`  "taking Data:FullTriggerArea 5min Run 1 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking Data:FullTriggerArea 5min Run 2 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking Data:FullTriggerArea 5min Run 3 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u`  "taking Data:FullTriggerArea 5min Run 4 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u`  "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "This is the end of Data Taking of Crab Wobble 1" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
Index: trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble2
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble2	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/DataTakingWobble2	(revision 12680)
@@ -0,0 +1,45 @@
+# Move Telescope to Wobble Position 2
+.! echo `date -u` "Data Taking script for Crab Wobble 2 starting up... " >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Pedestal with BIAS on 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking External Light Pulser with BIAS on 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 light-pulser-ext
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+#Data Taking with Full Trigger Area (4x5min)
+
+.! echo `date -u` "taking Data:FullTriggerArea 5min Run 1 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Data:FullTriggerArea 5min Run 2 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Data:FullTriggerArea 5min Run 3 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Data:FullTriggerArea 5min Run 4 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START 300 -1 data
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+
+.! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "This is the end of Data Taking of Crab Wobble 2" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
Index: trunk/FACT++/ScriptsForDimCtrl/FirstDrsCalib
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/FirstDrsCalib	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/FirstDrsCalib	(revision 12680)
@@ -0,0 +1,52 @@
+# Making sure bias is off
+.! echo `date -u` "First DRS Calibration Script starting up..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "-------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FEEDBACK/ENABLE_OUTPUT 1
+BIAS_CONTROL/SET_ZERO_VOLTAGE
+.s BIAS_CONTROL 7
+FAD_CONTROL/START_DRS_CALIBRATION
+.! echo `date -u` "bias voltage is switched off" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking DRS:Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking DRS:Gain 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 drs-gain
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking crosscheck Pedestal 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+FAD_CONTROL/SET_FILE_FORMAT 2
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "switching on bias ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+BIAS_CONTROL/SET_GLOBAL_DAC 1
+.s BIAS_CONTROL 9
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "taking Pedestal with BIAS on 1000 ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+MCP/START -1 1000 pedestal
+.s FAD_CONTROL 8
+.s FAD_CONTROL 4
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "switching OFF bias ..." >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+BIAS_CONTROL/SET_ZERO_VOLTAGE
+.s BIAS_CONTROL 7
+.! echo `date -u` "... done" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+
+.! echo `date -u` "----------------------------------------------------" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
+.! echo `date -u` "This is the end of First DRS Calibration" >> ~/FACT++/ScriptsForDimCtrl/DataTaking.log
Index: trunk/FACT++/ScriptsForDimCtrl/RampingBias
===================================================================
--- trunk/FACT++/ScriptsForDimCtrl/RampingBias	(revision 12680)
+++ trunk/FACT++/ScriptsForDimCtrl/RampingBias	(revision 12680)
@@ -0,0 +1,25 @@
+# Ramping bias up and down
+# this is just a test, to check the order of states of biasctrl while ramping.
+FEEDBACK/ENABLE_OUTPUT 1
+FAD_CONTROL/SET_FILE_FORMAT 0
+.s BIAS_CONTROL 7
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 500
+FAD_CONTROL/SET_FILE_FORMAT 0
+# Bias ist Off  .. switching it on
+BIAS_CONTROL/SET_GLOBAL_DAC 1
+.s BIAS_CONTROL 9
+.s BIAS_CONTROL 5
+.s BIAS_CONTROL 9
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 500
+FAD_CONTROL/SET_FILE_FORMAT 0
+.w 2000
+# Bias ist On .. switching it off
+BIAS_CONTROL/SET_ZERO_VOLTAGE
+.s BIAS_CONTROL 7
+FAD_CONTROL/SET_FILE_FORMAT 2
+.w 500
+FAD_CONTROL/SET_FILE_FORMAT 0
+# Bias ist Off again . stopping this script.
+