Index: /firmware/FSC/src/muxer_fsc.c
===================================================================
--- /firmware/FSC/src/muxer_fsc.c	(revision 17627)
+++ /firmware/FSC/src/muxer_fsc.c	(revision 17628)
@@ -1,4 +1,3 @@
 #include "muxer_fsc.h"
-#include "usart.h"
 // Sets voltage Muxer to current channel
 // this is a Muxing, and therefor the adc might need some time to settle.
@@ -11,63 +10,60 @@
 // channel 40..79 --> looking at the current channels
 // channel 80..83 --> looking at the humidities
-void Set_V_Muxer (U08 channel){
-U08 SB = 0;
-	// voltages
-	if (channel < 40) {
-		if (channel < 36)
-			SB = channel*2;
-		else
-			SB = (channel+1)*2;
-	}
-	// currents
-	else if (channel < 80) {
-		channel -= 40;
-		if (channel < 36)
-			SB = channel*2+1;
-		else
-			SB = (channel+1)*2+1;
-	}
-	// humidities
-	else if (channel < 84) {
-		channel -= 80;
-		switch (channel) {
-			case 0:
-				SB = 0x48; //0100.1000
-				break;
-			case 1:
-				SB = 0x49; //0100.1001
-				break;
-			case 2:
-				SB = 0x52; //0101.0010
-				break;
-			case 3:
-				SB = 0x53; //0101.0011
-				break;
-		} // end of switch-case
-	} // end of if (channel < some_number)
+void Set_V_Muxer (U08 channel) {
+    U08 SB = 0;
+    // voltages
+    if (channel < 40) {
+        if (channel < 36)
+            SB = channel*2;
+        else
+            SB = (channel+1)*2;
+    }
+    // currents
+    else if (channel < 80) {
+        channel -= 40;
+        if (channel < 36)
+            SB = channel*2+1;
+        else
+            SB = (channel+1)*2+1;
+    }
+    // humidities
+    else if (channel < 84) {
+        channel -= 80;
+        switch (channel) {
+            case 0:
+                SB = 0x48; //0100.1000
+                break;
+            case 1:
+                SB = 0x49; //0100.1001
+                break;
+            case 2:
+                SB = 0x52; //0101.0010
+                break;
+            case 3:
+                SB = 0x53; //0101.0011
+                break;
+        } // end of switch-case
+    } // end of if (channel < some_number)
 
-	PORTC = (PORTC & 0x80) | (0x7F & SB); // Here the muxer is switched.
+    PORTC = (PORTC & 0x80) | (0x7F & SB); // Here the muxer is switched.
 }
 
 void Set_T_Muxer(U08 channel) {
-U08 SA = 0x00;
-
-	switch (channel/16) {
-		case 0:
-			SA |= 1<<4; // 0001.0000
-			break;
-		case 1:
-			break;		// 0000.0000
-		case 2:
-			SA |= (1<<4)|(1<<5); // 0011.0000
-			break;
-		case 3:
-			SA |= 1<<5;  // 0010.0000
-			break;
-	}
-	
-	SA =  SA | (channel%16);
-	
-	PORTA = (PORTA & 0xC0) | (0x3F & SA); // Here the muxer is switched.
+    U08 SA = 0x00;
+    switch (channel/16) {
+        case 0:
+            SA |= 1<<4; // 0001.0000
+            break;
+        case 1:
+            break;		// 0000.0000
+        case 2:
+            SA |= (1<<4)|(1<<5); // 0011.0000
+            break;
+        case 3:
+            SA |= 1<<5;  // 0010.0000
+            break;
+    }
+    SA =  SA | (channel%16);
+    PORTA = (PORTA & 0xC0) | (0x3F & SA); // Here the muxer is switched.
 }