Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_10.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_10.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_10.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.6 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.1 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.096 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.8 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3136 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 1.5 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_11.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_11.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_11.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.6 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.1 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.096 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.85 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3136 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 1.5 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_12.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_12.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_12.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.6 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.1 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.096 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.85 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3136 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 1.5 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_4.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_4.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_4.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.0 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 3.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.15 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.12 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.0V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.0 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -16180.125 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: 0.0 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 30 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.375 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3367 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.626*(1-exp(-0.3803*0.5*x))*exp(-0.0649*0.5*x)) +PulseShape.Function.Npx: 300 +PulseShape.Function.Xmin: 0 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_5.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_5.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_5.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.0 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.15 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.12 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.0 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -204.105 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 30 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 21.994 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3367 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851*0.5)/(1.063*0.5))))*exp(-(0.5*x-2.851*0.5)/(19.173*0.5))) +PulseShape.Function.Npx: 300 +PulseShape.Function.Xmin: 0 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_6.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_6.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_6.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.0 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.15 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.12 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.0 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3367 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.0 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_7.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_7.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_7.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.0 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.15 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.12 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.0 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3367 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.7 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_8.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_8.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_8.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.0 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.1 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.096 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.8 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 1000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3367 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.7 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment + Index: /fact/MonteCarloSettings/Ceres/Standard/ceres_9.rc =================================================================== --- /fact/MonteCarloSettings/Ceres/Standard/ceres_9.rc (revision 18551) +++ /fact/MonteCarloSettings/Ceres/Standard/ceres_9.rc (revision 18551) @@ -0,0 +1,275 @@ +# ========================================================================== +############################################################################# +# ========================================================================== +# General +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to setup the logging stream for the jobs +# (overwrites command line options) +# ------------------------------------------------------------------------- +MLog.VerbosityLevel: 4 +#MLog.DebugLevel: 1 +#MLog.NoColors: yes + +# ========================================================================== +############################################################################# +# ========================================================================== +# Ceres +# ========================================================================== +############################################################################# +# ========================================================================== + +# ------------------------------------------------------------------------- +# Use this if you want to write the MJStar output somewhere +# If you don't want it, it is written to the calibration output anyhow. +# ------------------------------------------------------------------------- +#PathOut: . +#PathIn: . + + +# ------------------------------------------------------------------------- +# Configure Eventloop +# ------------------------------------------------------------------------- +#MaxEvents: 10000 +#Overwrite: yes,no + + +# ------------------------------------------------------------------------- +# Use this to setup binnings. For more details see: MBinning::ReadEnv +# ------------------------------------------------------------------------- +# BinningEnergy.Raw: 100 1 100000 log +# BinningSize.Raw: 100 1 10000000 log +BinningImpact.Raw: 40 0 1000 +# BinningHeight.Raw: 50 0 12 +# BinningAz.Raw: 360 -360 360 +# BinningZd.Raw: 70 0 70 +# BinningViewCone.Raw: 155 0 31 +BinningTrigPos.Raw: 300 -25 275 +# BinningEvtWidth.Raw: 150 0 25 +# BinningDist.Raw: 100 0 2.5 +# BinningDistC.Raw: 100 0 2.5 +# BinningThreshold.Raw: 35 0.9 90000 log +# BinningEnergyEst.Raw: 100 0.9 90000 log + + +# ------------------------------------------------------------------------- +# Initialize random number generator (see MJob::InitRandomNumberGenerator) +# ------------------------------------------------------------------------- +RandomNumberGenerator: TRandom3 +#RandomNumberSeedValue: 0 + + +# ------------------------------------------------------------------------- +# Ceres general setup +# ------------------------------------------------------------------------- + +# Switch off the camera "electronics" +#Camera: Off + +# Force the use of the "hardware" trigger for calibration data +#ForceTrigger: Yes + + +# ------------------------------------------------------------------------- +# Some setup for the atmosphere. The default should be well suited. +# ------------------------------------------------------------------------- +#MSimAtmosphere.FileAerosols: resmc/fact/atmopshere-aerosols.txt +#MSimAtmosphere.FileOzone: resmc/fact/atmopshere-ozone.txt + + +# ------------------------------------------------------------------------- +# Here you can control the poiting of the telescope. To switch on +# off-target observations set a value for the distance !=0 [deg]. +# For details see MSimPointingPos +# ------------------------------------------------------------------------- +MSimPointingPos.OffTargetDistance: 0.6 +#MSimPointingPos.OffTargetPhi: -1 + + +# ------------------------------------------------------------------------- +# Setup the reflector and camera geometry +# ------------------------------------------------------------------------- +Reflector.Constructor: MReflector + +# For the file definition see MReflector::ReadFile + +Reflector.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-reflector_first_light_untill_May2014.txt +# Units mm: ~0.02° +#Reflector.SetSigmaPSF: 1.8 +# Units mm: ~0.03° +#Reflector.SetSigmaPSF: 2.6 +#Reflector.SetSigmaPSF: 1.66 + +# new Value from 7.12.2012: +# 0.95 of the reflected light was inside a circle with a radius of 2.25mm. This corresponds to a SigmaPSF of 1.3 mm +#Reflector.SetSigmaPSF: 1.3 + +# new Value from 29.05.2013: +# Set SigmaPSF to pixelsize +Reflector.SetSigmaPSF: 2.0 + +# --- DWARF --- +# distance from mirror to camera [cm] +#focal_distance 489.73 +# TRUE focal of the paraboloid (must correspond to that of the mirror positions defined below!) +#paraboloid_focal 488.87 + +#MGeomCam.Constructor: MGeomCamDwarf(189.8, 9.5, 4.8887); +MGeomCam.Constructor: MGeomCamFACT(); + +#MSimBundlePhotons.FileName: resmc/fact/dwarf-fact.txt + +# Set the APD type (1: 30x30 , 2: 60x60, 3:60x60(ct=15%)) +MSimAPD.Type: 0 +MSimAPD.NumCells: 60 +MSimAPD.DeadTime: 3.0 +MSimAPD.RecoveryTime: 8.75 +MSimAPD.CrosstalkCoefficient: 0.1 +MSimAPD.AfterpulseProb1: 0.14 +MSimAPD.AfterpulseProb2: 0.11 + +MSimExcessNoise.ExcessNoise: 0.096 + +# ------------------------------------------------------------------------- +# Setup the absorption, conversion efficiency and angular acceptance +# ------------------------------------------------------------------------- +MirrorReflectivity.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/MirrorReflectivity_Lustermann_FACT_bearbeitet.txt +PhotonDetectionEfficiency.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-pde-1.4V.txt +ConesAngularAcceptance.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-cones-angular-acceptance.txt +ConesTransmission.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/Transmittance_1439Cones_FACT_bearbeitet.txt + +AdditionalPhotonAcceptance.Function.Name: 0.8 +AdditionalPhotonAcceptance.Function.Npx: 100 +AdditionalPhotonAcceptance.Function.Xmin: 290 +AdditionalPhotonAcceptance.Function.Xmax: 900 + +# ------------------------------------------------------------------------- +# Setup what in MMCS would be called "additional spot size" +# ------------------------------------------------------------------------- +#MSimPSF.Sigma: -1 +#MSimReflector.DetectorMargin: 0 + +# ------------------------------------------------------------------------- +# Setup the dark counts (FrequencyFixed) and the NSB noise per cm^2 +# ------------------------------------------------------------------------- +# Dark Counts per APD: ~4MHz +MSimRandomPhotons.FrequencyFixed: 0.004 +# NSB photon rate per cm^2 ~40MHz (folded with the cones' angular +# acceptance and the wavelength acceptance of the camera (window, apd, etc) +# 0.040 1/ns/cm^2 NSB-rate: +#MSimRandomPhotons.FrequencyNSB: 0.025 +MSimRandomPhotons.FileNameNSB: resmc/night-sky-la-palma.txt +MSimRandomPhotons.FrequencyNSB: 0.0 + + + +# FIXME: With a class describing the cones we could give NSB as +# per sr and cm^2 + +# ------------------------------------------------------------------------- +# Setup the trigger +# ------------------------------------------------------------------------- +# This line could be omitted but then the discriminator would be +# evaluated for all pixels not just for the pixels which are +# later "connected" in the trigger (used in the coincidence map) +MSimTrigger.FileNameRouteAC: /home/fact_opr/mc_configuration_files/setup/ceres/030/fact-trigger-sum.txt + +# DiscriminatorThreshold is 9*offset(-1850)+21*gain(22.375)=16180.125 +MSimTrigger.DiscriminatorThreshold: -192.387 + +MSimTrigger.CableDelay: 21.0 +MSimTrigger.CableDamping: -0.96 +MSimTrigger.CoincidenceTime: 0.5 + +# Every Pixel(!) should see the same signal independant of its size +MSimCalibrationSignal.NumPhotons: 24 +MSimCalibrationSignal.NumEvents: 10000 + + +IntendedPulsePos.Val: 26 + +#PulseShape.FileName: resmc/fact/dwarf-pulse.txt + + +# ------------------------------------------------------------------------- +# Description how a pedestal/calibration signal is produced +# ------------------------------------------------------------------------- + +#MSimCalibrationSignal.NumEvents: 1000 +#MSimCalibrationSignal.NumPhotons; 5 +#MSimCalibrationSignal.TimeJitter; 1.0 + + +# ------------------------------------------------------------------------- +# Setup the FADC +# ------------------------------------------------------------------------- + +MRawRunHeader.SamplingFrequency: 2000 +MRawRunHeader.NumSamples: 300 +MRawRunHeader.NumBytesPerSample: 2 +MRawRunHeader.FadcResolution: 12 + +MSimCamera.DefaultOffset: -1850.0 +MSimCamera.DefaultNoise: 2.8125 +MSimCamera.DefaultGain: 22.553 + + +# Value for the fudgefactor in the calculation of the accoupling: +# MSimCamera.ACFudgeFactor: 0.3367 +# MSimCamera.ACTimeConstant: 20 + +MSimCamera.ACFudgeFactor: 0.3136 +MSimCamera.ACTimeConstant: 20 + + + +#MSimReadout.fConversionFactor: 1 + +# The number of sampling points is almost irrelevant because they +# are equidistant, i.e. calculated and no search is necessary. +# Nevertheless, you must make sure that there are enough points +# to sample the function accuratly enough. +# Attention: x in the function is given in slices, so if you change the sampling +# frequency you have to change also this function +PulseShape.Function.Name: (1.239*(1-1/(1+exp((0.5*x-2.851)/1.063)))*exp(-(0.5*x-2.851)/19.173)) +PulseShape.Function.Npx: 310 +PulseShape.Function.Xmin: -10 +PulseShape.Function.Xmax: 300 + +# PulseShape.FileName: /home/fact_opr/mc_configuration_files/setup/ceres/030/pulse_template_20141216_filtered.txt + + +# ------------------------------------------------------------------------- +# Setup an image cleaning on the pure gamma signal (without noise) +# ------------------------------------------------------------------------- + +#MImgCleanStd.CleanLevel1: 6.0 +#MImgCleanStd.CleanLevel2: 6.0 + +# ------------------------------------------------------------------------- +# This is a cut executed after the calculation of the image parameters +# ------------------------------------------------------------------------- + +#Cut.Condition: MNewImagePar.fNumUsedPixels>3 && MHillas.fSize>6 +#Cut.Condition: MHillas.fSize>10 +#&& MHillas.fSize>30 +#MSimTrigger.SimulateElectronics: Off +Cut.Inverted: yes +Cut.Condition: MHillas.fSize>10.0 + + +# Does not trigger anyway +#ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 +ContEmpty3.Condition: MPhotonEvent.GetNumPhotons<10 + +MFixTimeOffset.FileName: resmc/fact/pixel_delays_ALL_ZERO.csv +ResidualTimeSpread.Val: 0.7 +# ResidualTimeSpread.Val: 0.0 +#IndividualTimeSpread.Val: 2.0 +GapdTimeJitter.Val: 0.0 + +# last line comment +