Index: trunk/MagicSoft/TDAS-Extractor/Conclusions.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Conclusions.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Conclusions.tex	(revision 5244)
@@ -0,0 +1,7 @@
+\section{Conclusions}
+\ldots {\it This section will propose the best signal extractor.}
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/Criteria.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Criteria.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Criteria.tex	(revision 5244)
@@ -0,0 +1,65 @@
+\section{Criteria for the Optimal Signal Extraction}
+
+\subsection{Resolution (amplitude and time)}
+\ldots {\it In this section, the jitter to exactly identical input pulses is measured, for times, amplitudes, 
+high-gain and low-gain pulses
+\begin{itemize}
+\item Jitter to pulpo pulses  \ldots Hendrik
+\item Jitter to pedestals (of different intensity) \ldots Hendrik
+\item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
+\item Comparing the low-gain to high-gain ratio for different intensities \ldots Markus
+\item Derive the time jitter to calibration pulses \ldots Maxim ???
+\end{itemize}
+}
+
+\subsection{Bias}
+\ldots {\it In this section, the bias of the extractor for low and high intensities is defined and measured
+\begin{itemize}
+\item Bias to pedestals (of different intensity) \ldots Hendrik
+\item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
+\end{itemize}
+}
+
+\subsection{Signal to Noise}
+\ldots {\it In this section, the signal to noise of an extractor is determined, for times and amplitudes
+\newline \ldots Maxim ???, Thomas ???
+}
+
+\subsection{Stability}
+\ldots {\it In this section, the stability of an extractor to slightly varying pulse shapes is examined.
+\begin{itemize}
+\item Stability w.r.t. different weights files \ldots Hendrik
+\item Outliers in time and amplitude extractions \ldots ???
+\item Stability of conversion factors from the calibration \ldots Markus
+\item Stability w.r.t. the calibration secondary pulses \ldots Hendrik ???
+\end{itemize}
+}
+
+\subsection{Linearity}
+\ldots {\it In this section, the Nuria plots are examined \newline \ldots Nuria
+
+\subsection{Treatment of calibration pulses}
+\ldots {\it In this section, the question of the different pulse shapes between calibration pulses, its 
+secondary pulses, possible secondary pulses from hadronic showers and the typical Cherenkov 
+pulses are extracted by the different extractors and typical dependencies examined, like the 
+Razmik plot, the number of photo-electrons with number of slices, comparisons between different colours, etc.
+\newline \ldots Hendrik??? , Markus???  + ????}
+
+\subsection{Low gain extraction}
+\ldots {\it In this section, the stability of the low-gain extraction w.r.t. the high-gain extraction is 
+examined. Useful plots are still to be defined.
+\newline \ldots Arnau ????}
+
+\subsection{Applicability for different sampling speeds / no pulse shaping.}
+\ldots {\it In this section, some comments of Hendrik will be made}
+
+\subsection{CPU requirements}
+\ldots {\it In this section, the needed CPU time is measured for each extractor independently
+\newline \ldots ALL (after all)}
+
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/Discussion.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Discussion.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Discussion.tex	(revision 5244)
@@ -0,0 +1,7 @@
+\section{Discussion}
+\ldots {\it This section will discuss the best signal extractor \newline \ldots Thomas ???, Florian }
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/Introduction.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Introduction.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Introduction.tex	(revision 5244)
@@ -0,0 +1,11 @@
+\section{Introduction}
+
+\begin{itemize}
+\item{Short description of the MAGIC read-out system}
+\end{itemize}
+
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/MAGIC_signal_reco.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/MAGIC_signal_reco.tex	(revision 5243)
+++ trunk/MagicSoft/TDAS-Extractor/MAGIC_signal_reco.tex	(revision 5244)
@@ -55,5 +55,4 @@
 %% contents %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 \thetableofcontents
-
 \newpage
 
Index: trunk/MagicSoft/TDAS-Extractor/Pedestal.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Pedestal.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Pedestal.tex	(revision 5244)
@@ -0,0 +1,21 @@
+\section{Criteria for an optimal pedestal extraction}
+
+\ldots {\it In this section, the distinction is made between: 
+\begin{itemize}
+\item Defining the pedestal RMS as contribution
+to the extracted signal fluctuations (later used in the calibration) 
+\item Defining the Pedestal Mean and RMS as the result of distributions obtained by 
+applying the extractor to pedestal runs (yielding biases and modified widths).
+\item Deriving the correct probability for background fluctuations based on the extracted signal height. 
+  ( including biases and modified widths).
+\end{itemize}
+\ldots Florian + ??? 
+\newline
+\newline
+}
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/Performance.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Performance.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Performance.tex	(revision 5244)
@@ -0,0 +1,14 @@
+\section{Performance}
+\ldots {\it This section will be written after the previous one}
+
+\subsection{Calibration}
+\subsection{Pulpo Pulses}
+\subsection{MC Data}
+\subsection{Cosmics Data?}
+\subsection{Pedestals}
+
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: 
Index: trunk/MagicSoft/TDAS-Extractor/Reconstruction.tex
===================================================================
--- trunk/MagicSoft/TDAS-Extractor/Reconstruction.tex	(revision 5244)
+++ trunk/MagicSoft/TDAS-Extractor/Reconstruction.tex	(revision 5244)
@@ -0,0 +1,18 @@
+\section{Pulse Shape Reconstruction}
+
+\begin{itemize}
+\item{Algorithm: overlay many events}
+\item{Differences cosmics / calibration}
+\item{Implementation / parameterization in the MC. 
+\newline
+\newline
+\ldots {\it MAYBE, we should create MC calibration pulses for the subsequent studies }
+\newline
+\newline}
+\end{itemize}
+
+
+%%% Local Variables: 
+%%% mode: latex
+%%% TeX-master: "MAGIC_signal_reco"
+%%% End: