Changeset 6408 for trunk/MagicSoft


Ignore:
Timestamp:
02/12/05 17:16:04 (20 years ago)
Author:
gaug
Message:
*** empty log message ***
File:
1 edited

Legend:

Unmodified
Added
Removed
  • trunk/MagicSoft/TDAS-Extractor/Criteria.tex

    r5783 r6408  
    1 \section{Criteria for the Optimal Signal Extraction}
     1\section{Criteria for the Optimal Signal Extraction (STILL TO DO!!)}
    22
    3 \subsection{Resolution (amplitude and time)}
    4 \ldots {\textit{In this section, the jitter to exactly identical input pulses is measured, for times, amplitudes,
    5 high-gain and low-gain pulses }}
    6 \begin{itemize}
    7 \item Jitter to pulpo pulses  \ldots Hendrik
    8 \item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
    9 \item Jitter to pedestals (of different intensity) \ldots Hendrik
    10 \item Comparing the low-gain to high-gain ratio for different intensities \ldots Markus
    11 \item Derive the time jitter to calibration pulses \ldots Maxim ???
    12 \end{itemize}
    13 
    14 \subsection{Bias}
    15 \ldots {\textit In this section, the bias of the extractor for low and high intensities is defined and measured }
    16 \begin{itemize}
    17 \item Bias to pedestals (of different intensity) \ldots Hendrik
    18 \item Comparing MC signal with and w/o noise of different intensity \ldots Nuria
    19 \end{itemize}
    20 
    21 \subsection{Signal to Noise}
    22 \ldots {\textit In this section, the signal to noise of an extractor is determined, for times and amplitudes
    23 \newline \ldots Maxim ???, Thomas ???}
     3\subsection{Resolution and Bias}
     4\ldots {\textit{The jitter to identical input pulses is measured, for times, amplitudes,
     5high-gain and low-gain pulses and different signal and background levels }}
    246
    257\subsection{Stability}
    26 \ldots {\textit In this section, the stability of an extractor to slightly varying pulse shapes is examined. }
     8\ldots {\textit The stability of an extractor to slightly varying pulse shapes is examined. }
    279\begin{itemize}
    2810\item Stability w.r.t. different weights files \ldots Hendrik
     
    3315
    3416\subsection{Linearity}
    35 \ldots {\textit In this section, the Nuria plots are examined \newline \ldots Nuria}
     17\ldots {\textit The Nuria plots ... }
    3618
    3719\subsection{Treatment of Calibration Pulses}
     
    3921secondary pulses, possible secondary pulses from hadronic showers and the typical Cherenkov
    4022pulses are extracted by the different extractors and typical dependencies examined, like the
    41 Razmik plot, the number of photo-electrons with number of slices, comparisons between different colours, etc.
    42 \newline \ldots Hendrik??? , Markus???  + ????}
     23Razmik plot, the number of photo-electrons with number of slices, comparisons between different colours, etc.}
    4324
    4425\subsection{Low Gain Extraction}
    45 \ldots {\textit In this section, the stability of the low-gain extraction w.r.t. the high-gain extraction is
    46 examined. Useful plots are still to be defined.
    47 \newline \ldots Arnau ????}
     26\ldots {\textit The stability of the low-gain extraction w.r.t. the high-gain extraction}
    4827
    4928\subsection{Applicability for Different Sampling Speeds / No Pulse Shaping.}
    50 \ldots {\textit In this section, some comments of Hendrik will be made}
     29\ldots {\textit Some comments by Hendrik ...}
    5130
    5231\subsection{CPU Requirements}
    53 \ldots {\textit In this section, the needed CPU time is measured for each extractor independently }
    54 \newline \ldots {\textit ALL (after all)}
    55 
     32\ldots {\textit The needed CPU time for each extractor}
    5633
    5734%%% Local Variables:
    5835%%% mode: latex
    5936%%% TeX-master: "MAGIC_signal_reco"
    60 %%% TeX-master: "MAGIC_signal_reco"
    6137%%% End:
Note: See TracChangeset for help on using the changeset viewer.