Index: trunk/MagicSoft/Mars/Changelog =================================================================== --- trunk/MagicSoft/Mars/Changelog (revision 7462) +++ trunk/MagicSoft/Mars/Changelog (revision 7463) @@ -40,8399 +40,2 @@ - improved logging - fixed small bugs - - - - 2005/12/21 Thomas Bretz - - * mbase/MEnv.cc: - - enhanced grey levels to eight - - * mbase/MStatusDisplay.[h,cc]: - - allow to open a new tab from the file menu - - * mbase/MTime.[h,cc]: - - added algorithm to calculate week - - - - 2005/12/20 Daniela Dorner - - * datacenter/macros/checkfilesavail.C: - - fixed bug - - - - 2005/12/14 Daniela Dorner - - * datacenter/scripts/copyscript: - - fixed bug - - - - 2005/12/13 Daniela Dorner - - * datacenter/scripts/copyscript: - - added updating of catalogfile - - - - 2005/12/12 Daniela Dorner - - * datacenter/scripts/rmlocks: - - fixed condition for removing lock-file - - * datacenter/scripts/dowebplots: - - improved new procedure - - added removing of old files - - added documentation - - * datacenter/scripts/linkmc: - - improved handling of directories - - added new mode - - added documentation - - simplyfied check for C and P link - - - - 2005/12/12 Thomas Bretz - - * mbase/MEnv.[h,cc]: - - added new Setter functions - - added a Clone function (TEnv cannot be streamed) - - added a data member to store the filename because fRcName cannot - be accessed - - * mbase/MTime.[h,cc]: - - added Getter DayofYear() - - added Getter Week() - - added Getter IsLeapYear() - - * mjobs/MDataSet.cc: - - simplified reading the catlog file by using TString::Tokenize - - * mtools/MCalendar.[h,cc]: - - added - - - - 2005/12/06 Daniela Dorner - - * datacenter/scripts/linkmc: - - added (script to link the mc-files into a YYYY/MM/DD structure) - - * datacenter/scripts/mcsequences: - - added (script to write sequencefiles for the mc) - - * datacenter/scripts/processmcsequences: - - added (script to run callisto and star for the mc) - - - - 2005/12/06 Thomas Bretz - - * mbase/MEnv.[h,cc]: - - added new function to get fillstyle by name - - added new function to get attributes of a TPave - - * mbase/MTime.cc: - - fixed layout of a comment - - * mhflux/MAlphaFitter.[h,cc]: - - added a function to calc upper limits - - exchaged some GetListOfFunctions()-Remove() with SetName - - * mcamera/Makefile, mcamera/CameraLinkDef.h: - - added MCameraTD, MCameraTH and MCameraRecTemp - - * showplot.cc: - - fixed a bug which caused trouble if only a filename was given - - * mastro/MAstro.h: - - added conversion constant to convert parsec to meter - - * mcamera/MCameraHV.h: - - only layout changes - - * mcamera/MCameraRecTemp.[h,cc], mcamera/MCameraTD.[h,cc], - mcamera/MCameraTH.[h,cc]: - - removed weired obsolste operators (which won't work at all) - - fixed calculation of max and min value - - replaced the nonsense TArrayS by TArrayC because the contents is - just a byte - - * mreport/MReportCC.cc: - - fixed the - - * ganymed.cc: - - fixed compilation of path to datasets - - - - 2005/12/01 Thomas Bretz - - * readdaq.cc: - - allow different file names - - * mbase/MLog.[h,cc]: - - replaced preprocessor directive by const data member - - * mraw/MRawRunHeader.[h,cc]: - - implemeted a fix reading the pixel assignment table between - RunNumber 53300 and RunNumber 68754. Three pixelassignments were - wrong. - - * mbase/MDirIter.cc: - - removed special treatment of ?-character - - * mbase/Makefile, mbase/BaseLinkDef.h: - - added new class - - * mimage/MHillas.cc: - - changed atan2-output in Print to same convention as used - in MGeomCam - - * mjobs/MJCalibrateSignal.cc: - - modified replacement rule for output file names - - * mbase/MStatusDisplay.cc: - - fixed initial size - - automatically call SetFrameBorderMode for each new canvas - - * mjobs/MSequence.cc: - - updated rule used to build file names - - * mgui/MCamEvent.[h,cc]: - - implemented new member function GetCameraRMS - - implemented new member function GetCameraStat - - * mraw/MRawFileRead.[h,cc]: - - implemented new I/O scheme - - - - 2005/11/30 Thomas Bretz - - * showplot.cc: - - fixed some warnings - - * mmc/MMcFadcHeader.[hxx,cxx]: - - added class description in the correct style - - derived from MCamEvent - - increased Class Version - - added GetPixelContent - - * mmc/Makefile: - - added mgui - - * datacenter/macros/plotdb.C: - - call SetFrameBorderMode for each new pad - - - - 2005/11/29 Thomas Bretz - - * mmain/MEventDisplay.cc: - - added a MContinue to be setup by mars.rc to the tasklist to - allow to choose events - - * mars.rc: - - added an example how to use the new cut - - - - 2005/11/28 Thomas Bretz - - * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, - readraw.cc, showlog.cc, showplot.cc, sponde.cc, star.cc: - - fixed a bug in displaying the startup message which prevented - the compilation date from beeing displayed - - added abbreviations for calling some programs (see NEWS) - - * mastro/MAstro.[h,cc]: - - added function to calc date of easter - - * mbase/MEnv.[h,cc]: - - added function to support some attributes (TAtt*) - - * mbase/MTime.[h,cc]: - - added support for locales in Set/GetStringFmt - - added function to calc date of easter - - * mjobs/MJCut.cc: - - output is called "Hadronness" not "MHadronness" - - * mjtrain/MJTrainDisp.cc, mjtrain/MJTrainEnergy.cc: - - fixed bug which caused the traincuts to be ignored - - - - 2005/11/25 Thomas Bretz - - * datacenter/macros/fillsignal.C: - - added filling of PulsePos used for seeting the extractor window - - * datacenter/macros/plotdb.C: - - added new tabs for new columns - - * mcamera/CameraLinkDef.h, mcamera/Makefile: - - added new classes MCameraTH, MCameraTD and MCameraRecTemp - - * mhcalib/MHCalibrationPulseTimeCam.[h,cc]: - - added some const-qualifiers - - * mreport/MReportCC.[h,cc]: - - updated to allow reading new CC reports - - * merpp.cc: - - added contentent of new CC report to CC output tree - - - - 2005/11/25 Daniel Mazin (2005/11/02) - - * mreflector/MRflEvtHeader.h - - added parameters first interaction point, telescope phi and theta, - fitted quantities from CORSIKA (number of particles in the shower - maximum, t0, tmax, chi2), fraction of electrons, muons and other - particles. Added getters and setters. - - * mfileio/MReadRflFile.cc - - filled in the variables above - - - - 2005/11/25 A. Moralejo (2005/10/14) - - * mreflector/MRflEvtHeader.h - - added parameters: energy, versor of primary's momentum and core - position on ground. Added getters and setters. - - * mfileio/MReadRflFile.cc - - filled in the variables above - - - - 2005/11/25 Toni Coarasa (09/09/2005) - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - fixed a bug in the calculation of the high-gain times: - They were all shifted by the same amount "fHiGainFirst". This - caused an offset in the order of the position of the left border of - the extraction window in the times calculated from high-gain and - from low-gain. The bug was there since 30.1.2005. - - - - 2005/11/25 Daniela Dorner - - * datacenter/scripts/runcallisto, runstar, runganymed: - - removed some not-needed logging outpu - - * datacenter/scripts/dowebplots: - - changed algorithm to create gifs/pngs from the root files - - * datacenter/scripts/checkfilesforsequenceavail, - datacenter/macros/checkfilesavail.C: - - fixed problem with manually inserted sequences - - * datacenter/scripts/movingrawfiles, movingsubsystemfiles: - - added (scripts to move files from old (LP) to new structure (DC) - - * datacenter/macros/fillsignal.C, setupdb.C: - - added 2 new columns (fPulsePosCheckMean, fPulsePosCheckRms) - - - - 2005/11/22 Thomas Bretz - - * macros/train/traindisp.C: - - added a comment - - * mdata/MDataFormula.cc: - - fixed along outstanding bug. Because TFormula had no name - some axis tick marks disappeared randomly - - fixed a typo (Add instead of Remove) - - * mfbase/MFEventSelector.cc: - - also reset fSelRatio if totalnumber of events from file. - - * mranforest/MHRanForestGini.[h,cc]: - - added a TPaveText containing text information to output - - * mranforest/MRanForest.[h,cc]: - - replaced type of fClassify by Bool_t - - improved handling of allocated memory (still to be checked - further) - - added Print function - - * mranforest/MRanForestCalc.[h,cc]: - - added another training type - - added some comments - - set version number to 1 to allow writing it to ganymed output - - added Print function - - Use GetEntriesFast and UncheckedAt in Process for - single tree forests - - * mranforest/MRanTree.[h,cc]: - - replaced type of fClassify by Bool_t - - added Getter for fClassify - - * mjtrain/MJTrainDisp.cc, mjtrain/MJTrainEnegry.cc: - - renamed TrainSingleRF to TrainRegression - - * mjtrain/MJTrainDisp.cc: - - replaced training variable (hypot(dist,dca)) by dist - - * mjtrain/MJTrainRanForest.cc: - - added some comment - - adde more log output to WriteDisplay - - * mjtrain/MJTrainSeparation.cc: - - updated output - - made it work properly - - * mjobs/MJCut.cc: - - added ClacDisp task to output - - * mjobs/MJPedestal.cc: - - removed an obsolete include - - - - 2005/11/21 Thomas Bretz - - * mjtrain/*, macros/train/*.C: - - added new class to train the random forest - - * Makefile: - - added mjtrain - - * macros/dohtml.C, macros/rootlogon.C: - - added mjoptim and mjtrain - - * mbase/MParList.[h,cc]: - - fixed copy constructor (it was crashing due to the - non-initialized lists) - - * mhbase/MBinning.[h,cc]: - - renamed SetEdges to SetEdgesLin (SetEdges now is just and - abbreviation) - - added a check for the number of bins to all SetEdges* - - * mhbase/MH3.cc: - - enable grid - - * mhbase/MHMatrix.[h,cc]: - - new member function Addcolumns taking a TCollection - - * mhist/MHHadronness.cc: - - align hadronnes into [0,1] - - * mjobs/MDataSet.[h,cc]: - - call SetOwner for fSequencesOn and fSequencesOff - - added Copy member function - - * mjobs/MJCut.[h,cc]: - - added new TaskEnv "CalcDisp" for a disp estimator - - * mjoptim/MJOptimizeDisp.cc: - - fixed typo in a title - - added a new histogram showing theta-sq versus size - - * mranforest/MHRanForestGini.[h,cc]: - - revised to display more information - - exchanged pointers to TGraph by objects - - * mranforest/MRanForest.[h,cc]: - - replaced some weired copy of the train matrix by a direct access - - revised output - - pipe error/resolution to tree - - * mranforest/MRanForestCalc.[h,cc]: - - copied code from MRFEnergyEst - - allow to set a name for the output container - - set numtry to 0 (auto) - - set ndsize to 1 (there is no auto mode) - - introduced variable for number of obsolete parameters - - * mranforest/MRanTree.h: - - new data member to store resolution/error - - * mranforest/Makefile, mranforest/RanForestLinkDef.h: - - removed MRFEnergyEst - - added MRanForestCalc - - * mtools/MTFillMatrix.[h,cc]: - - added the possibility to use PreCuts befre filling the matrix - - added ReadEnv - - * ganymed.rc, ganymed_onoff.rc: - - changed to new cuts trained with 1ES1218 and Crab-data - for maximum sigma*log10(excess) - - added new lines for CalcDisp - - - - 2005/11/18 Thomas Bretz - - * mhflux/MMcSpectrumWeight.cc: - - fixed a problem with using X more than once in the formula - - * ganymed.cc: - - improved UsageInfo - - * macros/optim/optimdisp.C, macros/optim/optimenergy.C: - - added some more examples - - * mbadpixels/MBadPixelsCalc.cc: - - updated authors - - * mbase/BaseIncl.h: - - added TArrayD - - * mbase/MLogHtml.cc: - - added some includes suggested by Ching-Cheng - - * mbase/MMath.[h,cc]: - - added some function for the analytical result of special fits - - * mfilter/MFEnergySlope.[h,cc]: - - some updated to make it better fit into Mars - - upadted the user interface - - * mhflux/MHEnergyEst.[h,cc]: - - updated to let everything fit what is commonly used. This - was just discussed with Abelardo - - some updates to the plots - - * mjobs/MDataSet.cc: - - added some includes suggested by Ching-Cheng - - upadted some output - - remove whitespaces from read TString - - * mmc/MMcCorsikaRunHeader.h: - - added new Getter - - * mranforest/MRanForest.cc: - - some updates to Grow-output - - - - 2005/11/16 Daniela Dorner - - * datacenter/scripts/doqualityplots: - - added (putting output of plotdb.C) in the web - - * datacenter/macros/plotdb.C: - - return 0 in case of failure and 1 in case macro finished without - problem - - - - 2005/11/16 Thomas Bretz - - * datacenter/macros/plotdb.C: - - added new plot for camera inhomgeneity - - - - 2005/11/16 Daniela Dorner - - * datacenter/macros/fillstar.C, setupdb.C: - - added new variable fInhomogeneity - - - - 2005/11/15 Thomas Bretz - - * macros/optim/optimdisp.C, macros/optim/optimenergy.C, - macros/optim/rfenergyest.C, macros/optim/optimwobble.C: - - added some more comments - - updated - - * mtools/MTFillMatrix.[h,cc]: - - added the possibility to use PreCuts like in MJOptim - - * mjobs/MJSpectrum.[h,cc]: - - implemented long awaiting E^2dN/dE plot - - updated displaying result (formula) - - * msql/MSQLServer.[h,cc]: - - added output of database name to GetName - - - - 2005/11/14 Daniela Dorner - - * datacenter/macros/insertsequence.C: - - added possibility to set source name in sequence file - - - - 2005/11/14 Thomas Bretz - - * MRFEnergyEst.[h,cc]: - - changed to allow for new regression method - - * MRanForest.[h,cc]: - - taken TH's implementation of the RF regression - + updated includes - + added fUserVal - + removed ReadRF, WriteRF -- obsolete - - * MRanForestGrow.[h,cc]: - - took out setting up the growing of the forest from this task - (currently it is done by MRanForest directly) - - adapted to changes in other classes as TH did. - - * MRanTree.[h,cc]: - - changes taken from TH - + added copy-constructor - + upadted to allow regression - - * Makefile, RanForestLinkDef.h: - - took out MRanForestCalc and MRanForestFill temporarily - - * macros/optim/rfenergyest.C: - - added - - * mhbase/MHMatrix.[h,cc]: - - added new constructor taking a TMatrix and a MDataArray as - argument - - - - 2005/11/12 Daniela Dorner - - * datacenter/macros/buildsequenceentries.C: - - fixed typo (be careful: due to this typo the values for - L2TriggerTable in the DB and in the sequence files may be wrong) - - fixed bug introduced on 29th sept - - * datacenter/scripts/rmlocks: - - fixed condition for removing lock-file - - * datacenter/macros/filldotrun.C: - - added new arehucas version - - * datacenter/macros/fillsignal.C,setupdb.C: - - added new variable (fPulsePosMean, fPulsePosRms) - - - - 2005/11/10 Thomas Bretz - - * datacenter/macros/plotdb.C: - - added SignalInner/Outer - - set background color to White - - * mhflux/MHEnergyEst.cc: - - added some comments - - * mpointing/MSrcPosCorrect.[h,cc]: - - allow overwriting of dx,dy from resource file - - * mreport/MReportTrigger.cc: - - fixed a typo of the indentation (two commands in one line) - - * mjobs/MDataSet.cc: - - fixed reading the source catalog. Only as many chars - as the requested source name had were compared - - * mjobs/MJCut.cc: - - print out the source coordinates in addition to its name - - * mpointing/MPointingPos.[h,cc]: - - added Print function - - * ganymed_onoff.rc: - - let the exponential fit fit all the background (decoupled - sclae and background-fit reagion) - - * mhflux/MAlphaFitter.[h,cc]: - - changed the background fit in the case of a ThetaSq function - from a polynomial to a exponential - - - - 2005/10/11 Thomas Bretz - - * mbase/MMath.cc: - - fixed a typo in SignificanceLiMaExc - - * mhflux/MAlphaFitter.[h,cc]: - - added a comment - - increased ClassDef - - * mhflux/MHAlpha.cc: - - correctly use SignificanceExc for bins instead of Significance - - - - 2005/10/11 Daniela Dorner - - * datacenter/macros/setupdb.C: - - added column in Ganymed - - - - 2005/10/10 Thomas Bretz - - * mbase/MMath.[h,cc]: - - added new function SignificanceLiMaExc - - * mbase/MTime.[h,cc]: - - added new Setter SetAxisTime - - * mcalib/MCalibCalcFromPast.cc: - - fixed some format in output - - * mhcalib/MHCalibrationCam.cc: - - fixed a typo - - * mhflux/MAlphaFitter.[h,cc]: - - added new data member fSiginificanceExc - - - - 2005/10/01 Thomas Bretz - - * mjobs/MDataSet.[h,cc]: - - implemented two new options for constructor allowing to - change the default path to image data and sequence files - - fixed some typos - - * mjobs/MSequence.[h,cc]: - - implemented new light condition "day" for completeness - - * ganymed.cc: - - implemented two new options --ind and --ins - - * datacenter/scripts/runganymed: - - added new option --ind= to ./ganymed - - - - 2005/10/01 - - * RELEASE 0.9.4.2 - - - - 2005/09/30 Thomas Bretz - - * callisto.rc, callisto_MarApr05.rc: - - replaced ScaleFactor by FileNameScale - - * callisto_Dec04Jan05.rc: - - changed ScaleFactor from 0.919 to 0.852 - - * datacenter/macros/fillstar.C: - - new reference values for caluclating PSF - - * mcalib/MCalibrateData.[h,cc]: - - added new option to read additional ScaleFactors from File - - * mjobs/MJStar.cc: - - set maxima/minima for rms and currents plot - _ really display rms (former display was incorrectly Pedestal - instead of its rms - - * mjobs/MJCalibration.cc: - - fixed a small bug in the display of unsuitable pixels. - (LoGainBlackout haven't been displayed, and previously excluded - pixels were wrong) - - * mbadpixels/MBadPixelsCam.cc: - - small simplifications in GetPixelContent - - * mmuon/MHMuonPar.cc: - - new reference line for 100% - - * mpointing/MPointingDevCalc.cc: - - reset counter in PreProcess - - * resources/calibration.rc: - - new file - - * mbadpixels/MBadPixelsTreat.[h,cc]: - - implemented a new treatment of "no-signal". If a pixel - presumably contains no signal as detected by the arrival time - interpolation its interpolated signal is overwritten with - a gaus. The gaus mean and rms are taken from the corresponding - MPedPhotCams - - - - 2005/09/29 Daniela Dorner - - * datacenter/macros/insertsequence.C: - - added (macro to insert manually changed sequences into the DB) - - * datacenter/scripts/insertsequences: - - added (script to call insertsequence.C) - - * datacenter/scripts/rmlock: - - added (script to remove lockfiles after 13 hours) - - - - 2005/09/27 Thomas Bretz - - * mbase/MTime.[h,cc]: - - added function GetMoonPhase - - added function GetMoonPeriod - - added function GetMagicPeriod - - * mcalib/MCalibrationRelTimeCalc.[h,cc]: - - fixed some wrong text alignment in output (therfor added - new member function) - - * mmuon/MHMuonPar.[h,cc]: - - commented out old obsolete member function - - updated reference lines - - * mmuon/MHSingleMuon.[h,cc]: - - if(abs(x-m)x+m) - - changed the binning of the time histogram such that - there is a bin symmetric to 0 - - reduced the start value sigma from 0.3 to 0.2 - - added new member function CalcSize - - * mmuon/MMuonSearchPar.[h,cc]: - - adapted some variable names to standard - - increased version number due to new variables in header - - added corresponding comment - - * mmuon/MMuonCalibParCalc.cc: - - replaced wrong calculation of size via integral by - new member function CalcSize - - * datacenter/macros/fillstar.C: - - updated reference values - - - - 2005/09/26 Markus Meyer - - * mmuon/MMuonSearchPar.[cc,h]: - - Mean arrival time of core Pixels is calculated - - * mmuon/MHSingleMuon.[cc,h]: - - new histogram fHistTime (TH1), which contents difference - of the arrival time between Mean arrival time of the core - pixels and every pixel in the margin around the circle. - The histogram is fitted by an gaussian distribution. - - fHistPhi is now a TProfile - - fHistPhi is only filled with pixels with an arrival time - of < 2 sigma difference to the fitted mean value - - * mmuon/MMuonSetup.cc: - - fThresholdArcPhi is changed to 5 phe - - * mmuon/MHMuonPar.cc: - - for the reference values to MC, the integral over the mean - values of the different radius bins is taken again - - - - 2005/09/22 Daniela Dorner - - * datacenter/macros/fillsignal.C, setupdb.C: - - added new value (fMeanSignalInner/Outer) - - * datacenter/macros/fillcalib.C, setupdb.C: - - changed precision of fArrTimeRmsInnser/Outer - - - - 2005/09/22 Thomas Bretz - - * mbadpixels/MBadPixelsTreat.cc: - - implemented a new treatment for the time information developed - by S.Ruegamer, this should give much better response than the - old very primitive algorithm. This is especially important - for bad pixels due to bright stars as Ceta-Tauri - - * mgeom/MGeomCam.[h,cc]: - - added new member function SeorNeighbors which sorts the neighboring - pixels clockwise - - call SortNeighbors in InitGeometry so that we always get a geometry - with clockwise sorted pixels. - - * ganymed.rc, ganymed_wobble.rc, ganymed_onoff.rc: - - new values for the spark-event-cut - - * macros/optim/optimonoff.C: - - some typos fixed - - * mjobs/MJSpectrum.cc: - - required missing MEnergyEst from ganymed.root... fixed. - - * mreport/MReportStarguider.cc: - - made aware of new format 20050829-0 - - * msignal/MSignalCam.cc: - - added a check for unmapped pixels to case 6 and 7 in - GetPixelContent - - - - 2005/09/21 Thomas Bretz - - * datacenter/macros/plotdb.C: - - changed some resolution values - - * datacenter/macros/fillsignal.C: - - started support to fill mean interpolated signal into DB - - * mfileio/MWriteRootFile.cc: - - added a FIXME comment - - * mhvstime/MHSectorVsTime.h: - - added new function GetGraph - - increased version number (increase was forgotten some time ago) - - * mimage/MImgCleanStd.cc: - - added some comments - - replaced IsPixelUsed/Core(int) by [int].IsPixelUsed/Core for - acceleration (some obsolete range checks are skipped) - - now the core status is explicily set in any case - - removed an obsolete range check in the ring cleaning - - the range checks became obsolete because with the new format - all pixels must exist. - - * mjobs/MDataSet.cc: - - sort the sequence numbers instead of the file names (the file - name sort might be biased due to different paths) - - * mjobs/MJob.[h,cc]: - - new static functions: SortArray - - * mjobs/MSequence.cc: - - sort run-numbers as the sequences are sorted in MDataSet - - - - 2005/09/20 Daniela Dorner - - * datacenter/scripts/runganymed: - - removed writing of summary file - - - - 2005/09/16 Thomas Bretz - - * mbadpixels/MBadPixelsTreat.cc: - - removed obsolete artificial add of missing (zero supressed) - pixels - - removed obsolete MArrayD which stored the result of the - interpolation but was never used - - * mcalib/MCalibrateData.cc : - - removed an obsolete calibConv=-1 in case the pixel is unsuitable - (UpdateConversionFactors) - - improved warning output in case the conv factor is out-of-range - - * mcalib/MCalibrateRelTimes.cc: - - reordered the algorithm for the time calibration to make it faster - - replaced if(IsLoGainUsed()) by the new function GetArrivalTime in - MArrivalTimePix - - * msignal/MArrivalTimePix.h: - - new getter function GetArrivalTime returning the arrival time - depending on the flag IsLoGainUsed() - - * msignal/MSignalPix.h: - - removed '!' from fRing data member to allow the status unmapped - to be stored after the badpixel treatment - - increased version number - - removed some obsolete comments - - added Copy() member function - - * mgeom/MGeomCam.[h,cc], mgeom/MGeomPix.h: - - new member function GetAngle - - * mhvstime/MHSectorVsTime.[h,cc]: - - updated comments - - increased version number - - added new member function GetGraph - - * msignal/MSignalPix.cc: - - updated comments - - updated Print() - - - - 2005/09/16 Daniela Dorner - - * datacenter/macros/filldotrun.C: - - added new arehucas version - - - - 2005/09/12 Thomas Bretz - - * callisto.cc: - - exchanged order of random and peak-search extracted pedestal in the - call of job4 (MJCalibrateSignal). It wasn't exchanged correctly when - the order of pedestal calculation was exchanged. - - * mbadpixels/MBadPixelsCalc.cc: - - replaced return kFALSE in Processing by return kERROR to allow - the automatic analysis to detect this kind of fatal errors - - * mbadpixels/MBadPixelsTreat.cc: - - fixed abug in the treatment of times. The indices of the neighbors - have never been requested but the index of the loop (0-5) instead. - - * mbase/MStatusDisplay.[h,cc]: - - a simple improvement to the usage of DrawClonePad. - - * mgui/MCamEvent.[h,cc]: - - new member function GetCameraMean - - * mhflux/MHThreshold.h: - - fixed a typo in a comment - - * mhvstime/MHSectorVsTime.cc: - - fixed a typo in the gsDefName - - * mjobs/MDataSet.cc, mjobs/MSequence.cc: - - stop the loop evaluating sequence/run numbers is seqeunce in NaN - - * mjobs/MJCut.cc: - - expand path-name to allow ~ in path name - - * mpedestal/MPedPhotCam.cc, msignal/MSignalCam.cc: - - replaced sqrt(pixratio) by PixRatioSqrt - - * msignal/MSignalCam.h: - - changed order of functions - - - - 2005/09/12 Daniela Dorner - - * datacenter/scripts/copyscript: - - fixed small bug in change of 2005/08/29 - - - - 2005/09/09 Thomas Bretz - - * mgeom/MGeomPix.cc: - - fixed a problem with incorrectly set bits for outermost - pixels (introduced with the latest changes) - - * mgeom/MGeomCam.[h,cc]: - - removed some obsolete comments - - - - 2005/09/09 Daniela Dorner - - * datacenter/scripts/runcallisto: - - fixed problem in handling of filenames - - - - 2005/09/06 Thomas Bretz - - * Makefile.conf.general: - - added libASImage - - * mgeom/MGeomCam.[h,cc]: - - clone the whole container in any case not only if it is - different from MGeomCam - - unified the non-default and default constructor - - * mgeom/MGeomPix.[h,cc]: - - initialize neighbors with empty values in constructor - - added some more default arguments - - * mhist/MHCamera.[h,cc]: - - implemented new Draw-options "nopal", "abscontent" - - implemented more accurate handling of transparency - - new flags kNoScale and kNoUnused - - changed private stuff to protected - - * mtools/Makefile, mtools/ToolsLinkDef.h: - - added new "tool" MagicJam - - * mtools/MagicJam.[h,cc]: - - added - - * mtools/jam/*.jam: - - games for Magic Jam - - - - 2005/08/29 Daniela Dorner - - * datacenter/scripts/insertdatasets, - datacenter/macros/insertdataset.C: - - added handling of the new fiels fComment in the table DataSets - - * datacenter/macros/setupdb.C: - - adapted to changes in the table DataSets - - * datacenter/scripts/copyscript: - - added copying of the file to the directory - /magic/datacenter/totape - - * datacenter/scripts/fillganymed: - - small bugfixes - - * datacenter/macros/fillstar.C: - - fixed bug in change of 25.7. - - - - 2005/08/28 Daniela Dorner - - * datacenter/scripts/dodatacheck: - - added 'find-todofile-algorithm' to this script to accelerate the - process of datacheck - - changed call of filldotraw.C - - * datacenter/macros/getdolist.C: - - added fDataCheckDone for the option to get many todofiles to - accelerate the process of datacheck - - * datacenter/macros/filldotrun.C: - - added check: if a run is a testrun, the flag for datacheck is - set to 'not to be done' - - * datacenter/macros/filldotraw.C: - - removed database name from the queries - - * datacenter/macros/setupdb.C: - - adapted to changes in the table MagicNumber - - adapted to changes concerning ganymed in the DB - - * datacenter/macros/fillganymed.C: - - adapted to the new table Ganymed in the DB - - * datacenter/scripts/fillganymed: - - added (script to fill the information of the ganymed*.root - files into the db) - - - - 2005/08/27 Daniela Dorner - - * datacenter/scripts/dowebplots: - - excluded files from lapalma for this check, as there's a big - amount of files (this would cause problems with the array in - shell) - - * datacenter/scripts/dodatacheck: - - fixed bug in finding rawfile and date of rawfile - - - - 2005/08/26 Daniela Dorner - - * datacenter/scripts/dowebplots: - - added some logging - - improved algorithm - - - - 2005/08/25 Daniela Dorner - - * datacenter/scripts/dowebplots: - - added (script to produce the plots for the websites out of the - rootfiles) - - - - 2005/08/24 Thomas Bretz - - * macros/tutorials/threshold.C: - - added new example how to calculate the threshold - - * mhflux/MHThreshold.cc: - - updated some comments - - - - 2005/08/22 Thomas Bretz - - * mgeom/MGeomPix.h, mgeom/MGeomCam.[h,cc]: - - added new function GetDist returning the distance between two - pixels - - * mhist/MHCamera.h: - - added new function (also to context menu) SetMinMax - - * mhist/MHEvent.[h,cc]: - - added the possibility to set min and max values for the displayed - data - - added a new option to display the arrival time after cleaning - - * mmain/MEventDisplay.cc: - - added the arrival time after cleaning to display - - set the min value in some displays to 0 - - * msignal/MSignalCam.cc: - - added the possibility to return the arrival time after cleaning - - - - 2005/08/18 - - * RELEASE 0.9.4.1 - - - - 2005/08/17 Thomas Bretz - - * mcalib/MCalibCalcFromPast.[h,cc]: - - reset the number of events fNumEvents in ReInit, because - the corresponding histograms get also reset. This prevents - the calibration from analysing partly filled histograms - - the number of cases in which the fChargeCalc->Finalize fails - are counted and written to the console - - In PostProcess all histograms and fChargeCalc are reset to - prevent the finalization of the histograms to fit partly filled - histograms and fail. - - * mcalib/MCalibrationChargeCalc.h: - - added a member function ResetNumProcessed so that MCalibCalcFromPast - can 'switch off' the finalization in PostProcess - - * mhcalib/MHCalibrationCam.cc, mhcalib/MHCalibrationChargeCam.cc, - mhcalib/MHCalibrationPulseTimeCam.cc: - - shortened some console output - - - - 2005/08/16 Thomas Bretz - - * ganymed.cc: - - fixed a typo in Usage() - - * mjobs/MDataSet.cc: - - fixed a typo in some output - - * ganymed.rc, ganymed_onoff.rc, ganymed_wobble.rc: - - fixed some comments - - * macros/dohtml.C: - - updated - - * mhflux/MHDisp.cc: - - some small fixes to let the code not crash in on-only more - (still doesn't give reasonable results... maybe a fit to the - background would do it) - - * mhflux/MHFalseSource.cc: - - removed some obsolete comment - - set initial marker color of stars in star display - - * mjobs/MJCut.cc: - - added a small fix to get the correct parlist in on-only mode - - * mpointing/MSrcPosCalc.[h,cc]: - - fixed source position handling in on-only mode - - - - 2005/08/11 Daniela Dorner - - * datacenter/scripts/makecallistolinks: - - fixed path - - * datacenter/scripts/runcallisto: - - improved locking - - * datacenter/macros/getdolist.C: - - included removing of file for the case, that there's something - strange happening in the shell script - - - - 2005/08/08 Daniela Dorner - - * datacenter/macros/buildsequenceentries.C: - - fixed some bugs - - added deleting of sequences - - * datacenter/macros/resetallruns.C: - - fixed small bug - - * datacenter/macros/fillstar.C: - - fixed bug - - * datacenter/scripts/dodatacheck: - - fixed logging of sinope - - - - 2005/08/05 - - * RELEASE 0.9.4 - - - - 2005/08/05 Daniela Dorner - - * datacenter/macros/setupdb.C: - - exchanged in the table RunProcessStatus the column fFillDotRaw - by the column fDataCheckDone - - * steps.rc: - - adapted to the needs of the new step fDataCheckDone in the table - RunProcessStatus - - * datacenter/scripts/dodatacheck: - - added (script to do datacheck including filldotraw.C, sinope, - fillsinope.C, resetcolumn.C) - - * datacenter/macros/filldotraw.C: - - adapted to the needs the new script dodatacheck - - * datacenter/macros/fillsinope.C: - - adapted paths to the needs the new script dodatacheck - - removed test stuff - - * datacenter/macros/getdolist.C: - - added if clause to reduce the number of runs for datacheck - (arrays in shell scripts are limited) - - added logging output - - * datacenter/scripts/buildsequenceentries, fillcallisto, - checkfilesforsequenceavail, checkstardone, correcttime, - filesondisk, fillstar, insertdatasets, runganymed, runstar, - doexclusions, writesequencefiles, runcallisto: - - fixed typo and logging - - - - 2005/08/05 Thomas Bretz - - * mpointing/MSrcPocCam.[h,cc]: - - fixed a bug which caused problems if now source position was - defined in the dataset. - - * mastro/MAstroCatalog.[h,cc]: - - added new base class TAttMarker - - added new data mebers MAttLine for the two line types - - some simplification to the atoi/atof stuff - - added new helper class MAttLine - - increased class version to 2 - - - - 2005/08/04 Daniela Dorner - - * datacenter/scripts/makecallistolinks: - - added (script to make the links for the correct callisto.rc in - case when callisto_Dec04Jan05.rc is needed) - - * datacenter/macros/writesequencefile.C: - - added writing of ZdMin and ZdMax to the sequencefile - - * sinope.cc - - added printing of Usage() in case of missing arguments - - added option --outf to make it possible to give the filename - (needed for automation of datacheck) - - added output in txt-file in case of no events (needed for the - evaluation of runs with no interlaced events) - - small changes in output - - * datacenter/macros/setupdb.C: - - added new table (DataCheck) - - * datacenter/macros/fillsinope.C: - - added (macro to read in the sinope*.txt files and fill the - information into the DB) - - * datacenter/macros/filldotraw.C: - - added (was before in the directory macros/sql/) - - made some changes to include it into the automation - added function make it possible to call the macro not only - with the filename but also with the runnumber - - * macros/sql/*: - - removed (all macros are now in the datacenter directory) - - - - 2005/08/02 Thomas Bretz - - * mjobs/MJStar.cc: - - changed the muon cuts back after a discussion with Markus. I - made a mistake interpreting the meaning of the cuts. - - - - 2005/08/03 Daniela Dorner - - * datacenter/macros/getdolist.C: - - added if-clause to distinguish between steps that need one todo - file and steps that need one todo file per sequence/dataset (i.e. - callisto, star, ganymed) and added writing of these files - - * datacenter/scripts/runcallisto, runganymed, runstar: - - adapted scripts to the changes in getdolist.C (removed lines to - divide todo file, changed getting of todo file) - - * datacenter/scripts/runcallisto: - - added if-clause for the choosing of the correct callisto.rc - (needed due to the new callist_MarApr05.rc which is applied - between sequence 49736 and 53315 - - - - 2005/08/02 Daniela Dorner - - * datacenter/macros/buildsequenceentries.C: - - fixed bug, added some logging output and comments - - - - 2005/08/02 Thomas Bretz - - * callisto.rc, callisto_Dec04Jan05.rc: - - new ScaleFactor (1% difference) - - * callisto_MarApr05.rc: - - new file, identical to callisto.rc but scale factor 5% different - - * mhflux/MHPhi.[h,cc]: - - some small improvements - - commented code for further improvement - - * mjobs/MJCut.cc: - - implemented MHPhi for wobble mode - - * mjobs/MJStar.cc: - - repleced maximum deviation (45) in first muon cut by 35 - it is done anyhow in a later step and doesn't change in between - - * datacenter/macros/fillstar.C: - - now get muon data from MHMuonPar directly - - * mmuon/MHMuonPar.[h,cc]: - - implemented the function to get the reference values - - updated psf reference line - - implemented calib reference line - - - - 2005/08/01 Thomas Bretz - - * mhflux/MHPhi.[h,cc]: - - added - - * mhflux/Makefile, mhflux/FluxLinkDef.h: - - added MHPhi - - - - 2005/07/31 Daniela Dorner - - * datacenter/macros/buildsequenceentries.C: - - fixed bug in the new sequence-build algorithm (-> 2005/07/22): - completely re-wrote the function CheckSequence() to make sure, - that sequences which are not changed are not inserted once again - - - - 2005/07/30 Daniela Dorner - - * datacenter/scripts/sourcefile: - - added function to make a directory - - * datacenter/scripts/buildsequenceentries, checkstardone, copyscript, - checkfilesforsequenceavail, correcttime, doexclusions, filesondisk, - fillcallisto, fillstar, insertdatasets, runcallisto, runganymed, - runstar, writesequencefiles: - - replaced making of directories by the function - - * datacenter/macros/setupdb.C: - - added column fTest in table Source to make building datasets - easier - - fixed small bug - - * datacenter/macros/getdolist.C: - - fixed small bug - - * datacenter/macros/filldotrun.C: - - inserted the two new arehucas version from July 2005 - - - - 2005/07/29 Daniela Dorner - - * datacenter/scripts/sourcefile: - - added four more general paths to the sourcefile to make it - easier to use the software for different users, paths and setups - - * datacenter/scripts/buildsequenceentries, checkstardone, - checkfilesforsequenceavail, correcttime, doexclusions, filesondisk, - fillcallisto, fillstar, insertdatasets, runcallisto, runganymed, - runstar, writesequencefiles: - - adapted this scripts to the usage of the paths - - * datacenter/macros/buildsequenceentries.C, findcacofiles.C, - getdolist.C, writesequencefile.C: - - adapted this macros to the usage of the paths - - * datacenter/macros/buildsequenceentries.C, createdataset.C, - resetcolumn.C: - - fixed documentation of this macros - - - - 2005/07/27 Markus Meyer, Daniela Dorner - - * datacenter/macros/fillstar.C: - - implemented new algorithm and new values for the calculation - of the muon parameter in the database - - - - 2005/07/28 Thomas Bretz - - * mastro/MAstro.cc: - - fixed a bug in Deg2Hms reported by Abelardo. It gave wrong - results by 1./2pi - - - - 2005/07/27 Markus Meyer, Thomas Bretz - - * mmuon/MHSingleMuon.[h,cc]: - - added third (constant) parameter to arc width gaus fit - - replaced nonsense GetMaximumBin as start value for fit - by GetMaximum - - replaced TH1F for fHistWidth by TProfile - - * mmuon/MMuonSetup.cc: - - set new threshold for arc width plot to 2 - - * star.rc: - - replaced default for arc width threshold - - - - 2005/07/27 Thomas Bretz - - * mhflux/MAlphaFitter.cc: - - added a line at the cut value to PaintResults - - * mhflux/MHDisp.cc: - - replaced GetCosDelta/GetSinDelta by new GetNormAxis - - * mhist/MHRate.cc: - - replaced some warn by err - - * mimage/MHillas.[h,cc]: - - added new member function GetNormAxis - - - - 2005/07/26 Daniela Dorner - - * datacenter/macros/fillsignal.C, setupdb.C: - - changed format of variables fMeanPedRmsInner and fMeadPedRmsOuter - from float(5,1) to float(6,2) - - - - 2005/07/26 Thomas Bretz - - * mhflux/MHDisp.cc: - - improved scaling for significance plot, so that significances - similar to the ThetaSq plot come out - - * mhvstime/MHSectorVsTime.[h,cc]: - - implemented the possibility to set a minimum/maximum from outside - - * mjobs/MJStar.cc: - - added a plot of the pedestal rms vs time - - set minimum and maximum for dc currents vs time - - * mpedestal/MPedPhotCam.cc: - - added a sanity in GetPixelContent for the index - - - - 2005/07/25 Daniela Dorner - - * datacenter/macros/fillstar.C, setupdb.C: - - changed format of variable fMeanNumberIsland from float(5,1) to - float(6,2) - - - - 2005/07/25 Thomas Bretz - - * mastro/MAstroSky2Local.[h,cc]: - - allow setting a pointing deviation when calculating the rotation angle - - * mhflux/MHDisp.[h,cc]: - - added pot for a significance map - - changed alignment range from 0.33/0.47 to 0.325/0.475 - - added fDeviation to calculation of Rotatio angle - - removed some obsolete code - - * mpointing/MPointingPos.[h,cc]: - - added option to calculate Rotation angle using MPointingDev - - * ganymed_onoff.rc, ganymed_wobble.rc: - - added example for MPointingDevCalc - - * mjobs/MDataSet.cc: - - fixed an endless loop when a sequence is added twice - - * mjobs/MSequence.cc: - - fixed an endless loop when a run is added twice - - * mjobs/MJPedestal.cc: - - CheckEnv doesn't return kERROR, test for kFALSE instead - - * mpointing/MPointingDev.h: - - added fDevX - - added fDevY - - * mpointing/MPointingDevCalc.cc: - - call SetDevXY instead of the starguider calibration in zd/az - - * mpointing/MSrcPosCalc.cc: - - added the DevXY to the source position if fDeviation!=NULL - - - - 2005/07/22 Daniela Dorner - - * sinope.cc: - - added option to select only data or only calibration events for - the datacheck - - * datacenter/scripts/runstar, runcallisto: - - increased number of processes to ensure, that the runtime of a - process doesn't exeed 12 hours - - * datacenter/scripts/runganymed: - - removed second execution of ganymed - - * datacenter/scripts/: - - small change in all scripts to make it easier to adapt scripts - for a different user - - * datacenter/macros/buildsequenceentries.C: - - implemented new algorithm to build sequences: instead of - checking the conditions of the runs after grouping them together - the condition are taken into account for grouping the runs - Attention: some sequences will change with this new algorithm! - - - - 2005/07/22 Thomas Bretz - - * macros/tutorials/extendcam.C, macros/tutorials/hft.C: - - some updates. Replaced MCerPhotEvt by MSignalCam - - * mhflux/MHDisp.cc: - - some more fixes to allow no-smearing - - * mhft/MGeomCamMagicEnhance.cc: - - replaced GetPixById by the id itself - - * mimage/MImgCleanStd.cc: - - do not check for the pedestal container if absolute cleaning - has been chosen - - * mjobs/MJCalibrateSignal.cc: - - removed obsolete comments - - * mreport/MReport.[h,cc]: - - added some conversions for wrong version numbers - - * mreport/MReportCamera.cc: - - fixed a problem reading files with gkActiveLoadControlVersNum - - added a fix for report files before 200407070 - - * mhvstime/MHSectorVsTime.[h,cc]: - - added example to class reference - - fixed possible crash in SetName and SetTitle - - set default style to kFullDotMedium - - removed seconds from default axis labels - - changed default time labels size to 0.033 - - moved Draw code to Paint as in MHVsTime - - fixed wrong return of kCONTINUE in Fill - - * mhvstime/MHVsTime.cc: - - removed seconds from default axis labels - - * mjobs/MJStar.cc: - - added Starguider info to output - - added MHSectorVsTime to display mean DC current - - allow skipping MHPointing for very old files without - starguider reports - - * mpointing/MHPointing.[h,cc]: - - allow skipping MHPointing for very old files without - starguider reports - - removed displaying nominal Az - - * mjobs/MJCut.cc: - - implemented pointing correction by starguider - - * mpointing/MPointingDevCalc.cc: - - some minor updates - - * mpointing/MSrcPosCalc.[h,cc]: - - implemented usage of pointing deviation -- still in progress! - - * mpointing/MSrcPosCorrect.[h,cc]: - - inverted sign of pointing correction for anti-source - - write telescope axis to parlist - - * ganymed_wobble.rc: - - added setup for polynom order 1 - - - - 2005/07/21 Thomas Bretz - - * mastro/MAstro.[h,cc]: - - added new member function GetDevAbs - - * mcamera/MCameraAUX.[h,cc]: - - added new data members for counting house temperatures - - increased class version number to 2 - - * mcamera/MCameraHV.[h,cc]: - - added new data members for HV settings file name - - increased class version number to 2 - - * mhflux/MHDisp.cc: - - fixed handling of non-smearing - - fixed calculation of number of entries for the two wobble - histograms - - * mjobs/MJStar.cc: - - gave a new name to the task writing the Muon-tree - - * mpointing/MHPointing.cc: - - do not check the abs deviation but check both deviations - independantly whether they make sense. - - Plot only hour and minutes - - * mpointing/MPointingPosCalc.h: - - fixed wrong #ifndef - - * mpointing/Makefile, mpointing/PointingLinkDef.h: - - new class MPointingDev - - new class MPointingDevCalc - - * mpointing/PointingIncl.h: - - removed TVector2 - - * mreport/MReportCamera.[h,cc]: - - added interpretation CHTEMP and HVFIl valid since - arehcas version 200507190 (incl) - - * mreport/MReportDrive.cc: - - moved code from GetErrorAbs to MAstro - - * mreport/MReportStarguider.[h,cc]: - - moved code from GetDevAbs to MAstro - - added new getter returning a TVector2 - - * ganymed_onoff.rc, ganymed_wobble.rc: - - added - - * ganymed.rc: - - updated - - - - 2005/07/19 Thomas Bretz - - * mjobs/MJCut.cc: - - write MSrcPosCam to output - - write MSrcPosAnti to output - - removed MEnergyEst from output - - added MSrcPosCorrect to tasklist - - * mjobs/MJSpectrum.cc: - - removed MSrcPosCalc from tasklist for refilling - - removed hillas calculation from tasklist for refilling - (both need a better concept in MJCut: not writing to - results file, but to summary file) - - * mjobs/MJStar.cc: - - removed MSrcPosCalc from tasklist (better this is always done - correctly in MJCut) - - added Starguider information to output - - replaced Rate historams by new histogram MHRate - - added new histogram MHPointing - - * mpointing/MSrcPosCorrect.cc: - - write new optical axis to parameter list - - print a message if a correction is introduced for this run - - * mreport/MReportStarguider.[h,cc]: - - added GetDevAbs - - * mhist/MHRate.[h,cc]: - - added - - * mhist/Makefile, mhist/HistLinkDef.h: - - added MHRate - - * mpointing/MHPointing.[h,cc]: - - added - - * mpointing/Makefile, mpointing/PointingLinkDef.h: - - added MHPointing - - * mcalib/MCalibrationCam.[h,cc]: - - moved code of static function GetPulserColorStr into source file. - Hopefully this 'repairs' a strange message some people got linking - mars: `.gnu.linkonce.t._ZN15MCalibrationCam17GetPulserColorStrENS_13PulserColor_tE' referenced in section `.rodata' of mcalib/CalibCint.o: defined in discarded section `.gnu.linkonce.t._ZN15MCalibrationCam17GetPulserColorStrENS_13PulserColor_tE' of mcalib/CalibCint.o - which was mainly annoying. - - * mfbase/MF.cc: - - changed order and handling in ReadEnv. This allows to overwrite - already set resources in sponde (eg. MFMagicCuts.ThetaCut) - - * mhbase/MH.cc: - - first draft of a new palette introduced by Pepe (I got it from - Hendrik) - - - - 2005/07/16 Thomas Bretz - - * macros/dohtml.C: - - some updates to the macro section - - * mcalib/MCalibrationCam.h: - - added new member function GetPulserColorStr to convert - pulser color into string - - * mcalib/MCalibrationPattern.h: - - added new member function GetPulserColorStr to return - pulser color a string - - * mcalib/MCalibrationPatternDecode.cc: - - fixed a typo in a comment - - * mhflux/MHThetaSq.cc: - - set default number of bins to 75 - - * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc]: - - updated support for automatic weights. All cases should now - be handled as accurate as possible. - - * msignal/MC_calibration_weights_UV46.dat, - msignal/MC_cosmics_weights46.dat: - - new files - - - - 2005/07/14 Thomas Bretz - - * mbadpixels/MBadPixelCam.[h,cc]: - - added new function GetNumSuitable - - * mcalib/MCalibrationChargeCalc.cc: - - simplified FinalizeUnsuitablePixels() - - * mcalib/MCalibCalcFromPast.cc: - - when finalizing of unsuitable pixels fails return kERROR in - Process - - * mcalib/MCalibrationRelTimeCalc.cc: - - simplified counting unreliable pixels - - * mfilter/MFMagicCuts.[h,cc]: - - replaced the m3long cut. m3long now is used to determin which - origin might be the correct impact of the shower. This gives - not so steep theta plots and the 2D plot can be done at the - same time. - - The sign of Disp stored in the paremeter list is now correctly - aligned along the major axis of the shower. >0 for along major - axis, <0 otherwise. - - comment have been updated. - - some old code had been removed - - * mhflux/MHDisp.[h,cc]: - - updated with a more appropriate calculation of a background model - - - - 2005/07/13 Abelardo Moralejo (2005/07/12) - - * manalysis/MGeomApply.cc - - Now, if the MGeomApply task has a serial number >0 (indicating - most likely a specific telescope in a multi-telescope file), then - apply the geometry only to objects with the same serial number. - This is important for stereo setups in which the telescopes have - cameras with different numbers of pixels. If the MGeomApply task - has serial number 0 (default), it will apply the geometry to all - found objects as it used to do. - - * manalysis/MMcCalibrationUpdate.cc, mpedestal/MMcPedestalCopy.cc - - Now the PreProcess adds the serial number also to MRawRunHeader - and MMcRunHeader, since in stereo MC files produced with the - current camera simulation at CVS there is one such container per - telescope. There is no difference in behaviour for single - telescope files. Old MC stereo files will no longer be readable. - - * mimage/MNewImagePar.cc - - Made calculation of "Inner size" valid also for camera geometries - other than MAGIC standard one. The calculation of "inner leakage" - is now made only for MAGIC standard geometry (there is no easy - fix for that, but having fInnerSize and MHillas.fSize, the inner - leakage is a completely unnecessary parameter). Added a comment on - a possible fix for the calculation of fConc. - - * mcalib/MMcCalibrationCalc.[h,cc] - - Added member fMinSize and setter for it. It is the minimum - (uncalibrated) size of events to be used in the calibration. - Previously it was fixed at 1000 ADC counts, but the value depends - on the extractor used, so it must be possible to change it. - - Add the serial number to MRawRunHeader and MMcConfigRunHeader - (now there is one per telescope in stereo files). - - Moved the creation of histograms from the constructor to the - PreProcess, otherwise the serial number is not added to the - histogram name. - - In PostProcess, set the average QE for area 0 (inner pixels) in - MCalibrationQECam object, to be used later by MCalibrateData. - - * macros/starmcstereo.C - - Big update. Adapted to all changes above. Now not only relative, but - also absolute calibration (=SIZE in phes) is made. - - * mcalib/MCalibrateData.cc - - In PreProcess, changed initialization of fRenormFactor. Formerly - it was fixed to MCalibrationQEPix::gkDefaultAverageQE. Now we check - first if there is a valid average QE for inner pixels in - MCalibrationQECam, and if so, we inititalize fRenormFactor with it. - Else, the default gkDefaultAverageQE is taken. fRenormFactor is - used to convert back from photons to "equivalent inner pixel phes" - in the (now default) case of calibrating in phes. - - - - 2005/07/13 Raquel de los Reyes (2005/07/12) - - * merpp.cc - - Added the container MCameraActiveLoad to the rootified central - control files - - * mreport/MReportCC.[h,cc] - - Changes in the InterpreteBody to write the variable UPS status and - the Time difference between GPS and rubidium clock. - - * mreport/MReportCamera.cc - - Changes in the InterpreteCamera and InterpreteBody functions to allow - the data merpping from 2005_06_30. - - - - 2005/07/13 Abelardo Moralejo (2005/07/12) - - * macros/starmcstereo.C - - Fixed error which made some objects to be written twice in the - _test_ output file. - - - - 2005/07/13 Patricia Liebing (2005/07/06) - - * mhcalib/MHCalibrationChargeCam.cc: - - include new flag (kLoGainBlackout) into the "uncalibrated" - pixel classification (see docu from 28/06/2005 Markus Gaug) - - * mbadpixels/MBadPixelsPix.[cc.h], mcalib/MCalibrationChargeCalc.cc - - included flag kLoGainBlackout for unsuitable pixels w/ - corresponding docu/printout (see MHCalibrationChargeCam.cc) - - * mhcalib/MHCalibrationPulseTimeCam.cc, MHCalibrationCam.cc - - add Pixel ID to Debug printout statements - - * mjobs/MJCalibration.cc - - include new display for kLoGainBlackout unsuitable pixels - - - - 2005/07/13 Antonio Stamerra (2005/07/04) - - * manalysis/MMcTriggerLvl2Calc.cc - - the checks written on ReInit for MC have been moved to PreProcess() - - kFALSE substituted with kSKIP in the check for the standard MAGIC - geometry - - - - 2005/07/13 Abelardo Moralejo (2005/07/01) - - * macros/starmc.C - - Set two different cleaning tasks for the calibration loop and - for the second (analysis) loop. Otherwise, some pixels were - cleaned out in the first loop (we do not want this) if the - absolute method was chosen. - - - - 2005/07/13 Abelardo Moralejo (2005/06/30) - - * mmc/MTriggerDefine.h - - Added TRIGGER_PIXELS_4, a provisional number of trigger pixels - for the MGeomCamMagic1183 geometry. - - * mgeom/MGeomCamMagic1183.[h,cc] - - added. Possible design for a MAGIC-II camera. Preliminary - version, not yet ready to use. - - - - 2005/07/13 Abelardo Moralejo (2005/06/29) - - * mgeom/MGeomCamMagic1183.[h,cc] - - added. Possible design for a MAGIC-II camera - - * mgeom/Makefile, GeomLinkDef.h - - added new class above. - - - - 2005/07/13 Markus Gaug (2005/06/28) - - * mhcalib/MHCalibrationChargeCam.[h,cc] - - set the fPickupLimit and fBlackoutLimit for the low-gain arrays - to a 3.5 instead of the default used in MHCalibrationPix (5.0). - - use a new criterium to exclude bad pixels: If the high-gain was - saturated and the blackout-events in the low-gain exceed the - fNumLoGainBlackoutLimit, the pixel is declared unsuitable. - This excludes those pixels which have a saturating high-gain - channel, but the low-gain switch does not switch often enough - to make the distribution reliable. - - - - 2005/07/13 Markus Gaug (2005/06/23) - - * mhcalib/MHCalibrationChargeCam.cc - - fix a bug counting the number of saturated events. Up to now, the - number of saturated slices was counted (which is one for a not too - high number), but for some (pathological) pixels, many more slices - saturated and produced wrong limits. - - make the PickupLimit und BlackoutLimit for the low-gain explicitely - smaller. The too large limits caused a failed fit for some channels - which resulted in wrong calibration constants. (M. Gaug) - - - - 2005/07/13 Markus Gaug (2005/06/22) - - * mjobs/MJPedestal.cc - - change order of reading local environmnet variables in lines 1044 - to 1068. Reason: The lines: - if (fExtractor==tenv.GetTask()) - return kTRUE; - yielded sometimes a return before the rest of the env-variables - could be read in. This affected ONLY the reading of the pedestal - reference file and the bad pixels file name. (M. Gaug) - - Added "decode" task (MTriggerPatternDecode) task to the list also - for MC runs. - - * mhcalib/MHCalibrationChargeCam.cc - - fixed the setting of unreliability for saturated events where the - high-gain signal was not stable over time. Now, saturation is - asked for before (like in the high-gain fitted-case). (M. Gaug) - - fixed a small bug in the precise setting of the histogram ranges. - May have introduced a bias of typically 1 FADC cnt in the mean - fitted signal (< 0.5%). - - * mbadpixels/MBadPixelsPix.[h,cc] - - took out the un-used bad pixels information in function: - GetUnsuitableCalLevel(). - - debugged the class-documentation - - * mcalib/MCalibrationIntensityChargeCam.cc - - a very small fix in the axis title from N_phe to N_{phe} - - fixed one bug in the draw-functions of this class. Not (yet) used by - standard calibration. - - +some undocumented changes - - * mjobs/MJCalibration.cc - - changed order in tasklist between MCalibColorSet and - MPedCalcFromPedRun. Caused crashes in the intensity calibrations. - Does not affect ordinary calibration since MPedCalcFromPedRun is - then not in the tasklist anyhow. - - changed order of MHCalibrationChargeCam and MCalibrationRelTimeCalc. - This wrong order caused MCalibrationRelTimeCalc to print out - unreliable pixels which were not set by the rel. time calibration. - This caused some confusion in the reading of the output because of - the un-logical order of flag settings and posterior output. - - set the error of the hi-logain intercalibration constants - as the real error on the mean instead of the sigma. - - took out the those bad pixel-informations which are not used - any more in the "Defect" - display. (M. Gaug) - - - - 2005/07/13 Markus Gaug (2005/06/21) - - * mhcalib/MHCalibrationChargePix.h - - take out one un-necessary 'virtual'-declaration for the Draw- - function - - * mhcalib/MHGausEvents.cc - - fixed a small bug in the non-standard display with options. - - - - 2005/07/13 Markus Gaug (2005/06/19) - - * msignal/MExtractTimeAndChargeSpline.cc - - set fgOffsetLoGain from 1.7 to 1.39. This is the correct time - shift between high-gain and low-gain. Affects only very detailed - timing studies. - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - set fOffsetLoGain from 1.7 to 1.4 which corrects now exactly for - the arrival time difference between low-gain and high-gain pulses. - This wrong number could have had some effect on image cleanings - using the time information. (M. Gaug) - - * mcalib/MCalibrationBlindCam.[h,cc] - - remove obsolete Copy-function - - * mcalib/MCalibConstPix.h, mcalib/MCalibConstCam.h - - introduce Copy-functions - - set class index to 1 (was 0) - - * mcalib/MCalibrationChargePix.[h,cc] - - introduce Copy() function. - - - - 2005/07/13 Markus Gaug (2005/06/18) - - * mpedestal/MPedestalCam.cc - - modify Print() function to print out also the event-by-event - averaged results. - - * mpedestal/MExtractPedestal.[h,cc] - - new flag fUseSpecialPixels (set to kFALSE per default) - - new data member: fNameRawEvtData which can be set from outside - (e.g. to "MRawEvtData2"). - - with these two changes, the special pixels can be extracted. - Difference to previous version: if flag fUseSpecialPixels is set, - * the area and sector averages are not calculated. - * the MPedestalCam will get initialized to - MRawRunHeader->GetNumSpecialPixels(). - - fix a bug in the calculation of the event-by-event averaged - pedestal RMS (one total number of areas or sectors was not taken - into account). - - make local variables in the calculation of rms and mean doubles - instead of floats. - - * mpedestal/MPedCalcPedRun.cc - - do not calculate the area and sector averages in case flag - fUseSpecialPixels is set. - - check for existence of pointer fRawEvt in PostProcess. - - * mcalib/MCalibrationChargeCalc.[h,cc] - - implement possibility to set reference number of photo-electrons from - outside (stored in fExternalNumPhes). - - * mcalib/MCalibrateData.[h,cc], mcalib/MCalibCalcFromPast.cc, - mjobs/MJCalibrateSignal.cc: - - write calibration constants now in separate - MCalibrationIntensityConstCam. This is necessary since with the - introduction of the averageing of mean photo-electrons, the - MCalibrationIntensityChargeCam does not hold the correct conv. - factors any more. - - * mcalib/MCalibrateData.[h,cc] - - get also pointers to the IntensityCams and use them if exist - (previously, only the first calibration cam was used together - with the updatecam.) - - - - 2005/07/13 Markus Gaug (2005/06/17) - - * mcalib/MCalibrationIntensityCam.[h,cc] - - take out some un-used or commented code (variables fOffsets and - fSlopes). These data members were not in the streamter either. - - put some of the most-used code from the .cc file into the .h file - - add new function: SetCam(). - - - - 2005/07/13 Markus Gaug (2005/06/15) - - * mcalib/MCalibrationIntensityConstCam.[h,cc] - - new class to store the actual applied conversion factors (now with - averaged photo-electrons not in the MCalibrationIntensityChargeCam - any more). - - * mjobs/MJCalibration.cc - - set the correct (statistical) error of the inter-calibraiton factor - into MCalibrationChargePix::SetConversionHiLoErr() and the - sigma of the distribution - into MCalibrationChargePix::SetConversionHiLoSigma(). - - In MCalibrationChargePix, the mean conversion error is used for the - statistical error of the conversion factor. - - In CalibrateData, the sigma is used for the statistical error of the - converted signal to equiv. high-gain charges. - - * mcalib/MCalibCalcFromPast.[h,cc] - - implement the mean photo-electron averageing for a desired number of - calibration updates. - - * mcalib/MCalibrateData.cc - - use MCalibrationChargePix::GetConversionHiLoSigma() to calculate the - error (was previously MCalibrationChargePix::GetConversionHiLoErr(). - - * callisto.cc - - calculate first fixed window pedestal in MJPedestalY2, - then sliding window pedestal in MJPedestalY3 (order reversed). - - - - 2005/07/13 Markus Gaug (2005/06/14) - - * mcalib/MCalibrationHiLoPix.[h,cc] - - store also results from profile fits. - - increades class version - - * mhcalib/MHCalibrationHiLoPix.[h,cc], mhcalib/MHCalibrationHiLoCam.[h,cc] - - added TProfiles for every pixel filled with the high-gain signal - vs. low-gain signal which can be fitted to extract gain and - offset. - - * mhcalib/Makefile, mhcalib/HCalibLinkDef.h - - added MHCalibrationHiLoPix - - - - 2005/07/13 Markus Gaug (2005/06/10) - - * mcalib/MCalibrationRelTimeCalc.cc - - print out forgotten successfully calibrated pixels - - small change in spacing of one output - - * mhcalib/MHCalibrationCam.[h,cc] - - introduce max. number of events, the rest gets skipped before the - next ReInit() is called. Default: 4096 - Reason: The calibration causes too many un-reliable pixels if more - than about 5000 events are treated (@500 Hz) because of the - mode hopping of the VCSels. However, in the past, some - calibration runs have been taken (erroneously) with more - than 5000 events, especially the intensity scans where - a good precision is needed. - - increased version number - - introduce a Getter for the fAverageAreaNum array. - - re-normalize the area-averaged sigmas to the equivalent number per - pixel also for the intensity calibration. - - * mcalib/MCalibrationChargePix.[h,cc] - - divide errors in stat. and syst. errors. Both can be retrieved - now, depending on the study, one wants to make. - - * mcalib/MCalibrationChargeCalc.[h,cc] - - set a limit to the number of un-suitable and un-reliables pixels - for the run to succeed: 0.1 unsuitables and 0.3 un-reliables - - set UseExtractorRes to kTRUE, will raise the number of - photo-electrons for the spline extractor by 1-2% (correctly). - - re-normalize the pedestal RMS of the event-by-event averaged - area events to the sqrt of the number of used pixels. - - re-normalize the sigma of the event-by-event averaged area events - by 1/F-Factor. - - introduce switch to choose if un-reliables should be used for the - calculation of mean number of phes (default: kTRUE). - - print out the number of high-gain saturated pixels. - - - - 2005/07/13 Markus Gaug (2005/06/10) - - * mjobs/MJCalibrateSignal.[h,cc] - - skip also the PIN Diode events from the data calibration. - - - - 2005/07/13 Markus Gaug (2005/06/06) - - * mhcalib/MHGausEvents.[h,cc] - - put small functions into header file to speed up calculations a bit. - - * mcalib/MCalibrationRelTimeCalc.cc - - introduce flags to steer the setting of unreliability like done - in MCalibrationChargeCalc. Can be steered from the conf-file. - - * mbadpixels/MBadPixelsIntensityCam.[h,cc] - - implement two Get and Draw-functions to display bad pixels over - time like in the mcalib/MCalibrationIntensityChargeCam - - - - 2005/07/13 Markus Gaug (2005/06/03) - - * mhcalib/MHCalibrationPulseTimeCam.cc - - fill arrays only if IsOscillations() was asked. This is a speed - bug and could cause important memory leaks. It does not affect the - outcome of an analysis, however. - - - - 2005/07/13 Thomas Bretz - - * mbase/MTaskInteractive.[h,cc]: - - fixed a bug with calling ReInit... PostProcess was called instead. - - added the missing initialisation of fReInit in constructor - - * sinope.cc: - - removed plotting the tasklist statistics twice - - replaced DrawClone by DrawCopy (DrawClone gave problems) - - * mhflux/MAlphaFitter.[h,cc]: - - fixed the ThetaSq function. It was wrongly defined as - exp(-((x-c)/s)^2) instead of exp(-1/2*((x-c)/s)) - - Set start value for corresponding fit back to same value - as for a standard gauss-fit. - - - - 2005/07/12 Daniela Dorner - - * datacenter/macros/buildsequenceentries.C: - - fixed bug, that was caused by changes in TExMap in root_v4.04.02 - - - - 2005/07/12 Daniela Dorner - - * automatic-exclusions.rc: - - added two automatic exclusions - - * datacenter/macros/findcacofiles.C: - - adapted query to ensure, that only existing caco-files are - searched - - * datacenter/macros/getdolist.C: - - changed query to make sure, that new data is processed first - - * datacenter/macros/resetallruns.C: - - changed query to allow manual interaction in RunProcessStatus - - * datacenter/scripts/runganymed: - - fixed bug in choice of rc-file - - - - 2005/07/12 Thomas Bretz - - * mhist/MHEvent.[h,cc]: - - added MTime to output - - * mastro/MAstroCatalog.cc: - - added a fix which avoided reproducing the gui elements after - reading from file - - * mbase/BaseIncl.h: - - added TVector3 - - * mbase/MMath.[h,cc]: - - added Sgn function - - moved include of TVector3 to source file - - * mimage/MHillasExt.cc: - - included TVector2 - - * mjobs/MJCut.cc: - - write Disp to output - - write MTime to output - - changed handling of source position (MSrcPosCalc) - - * mpointing/MSrcPosCalc.[h,cc]: - - allow to switch off source pos calculation - - - - 2005/07/11 Thomas Bretz - - * callisto.cc, ganymed.cc, mars.cc, showlog.cc, - showplot.cc, sponde.cc, mimage/MImgCleanStd.cc: - - fixed some typos - - * mastro/MAstro.[h,cc]: - - added new member function GetStringDeg and GetStringHor - - * mastro/MAstroCatalog.cc: - - don't display empty ": " in tooltip for sources without name - - * mbase/MParContainer.cc, mbase/MTask.cc: - - fixed usage of a ?:-operator - - * mbase/MString.h: - - added two new constructors - - * mjobs/MDataSet.cc: - - made sure that all files read later are sorted correctly. - This is necessary to ensure correct reading of subsystem - data. - - skipped adding a sequence twice - - - print effective on time only in debug mode - - * mjobs/MSequence.cc: - - skipped adding a run twice - - * mpointing/MSrcPosCalc.cc: - - reformatted the comments - - add MTime and MPointingPos to branch list - - fTime and fObservatory are now presearched in PreProcess - to allow usage in macros having no RunHeaders (if they are - not found no warning is printed!) - - added sanity checks for these pointers in Process - - - - 2005/07/08 Thomas Bretz - - * showplot.cc: - - implemented the possibility to open a root interpreter - - * mbase/MMath.cc: - - added sanity checks in GaussProb - - * mimage/MHillasExt.[h,cc]: - - fixed some units - - added Paint - - * mimage/MNewImagePar.cc: - - fixed Print output - - * mmain/MEventDisplay.cc: - - print a separator between two events - - Draw MHillasExt, too - - * mmuon/MMuonCalibPar.cc, mmuon/MMuonSearchPar.cc: - - fixed Print output - - * mimage/MHillas.cc: - - implemented plotting a estimate of disp - - fixed some units in output - - fixed the special case in which the shower is symmetric to - the axis - - * mimage/MHillasCalc.cc: - - skipped printing the removed case 4 from MHillas::Calc - - * mbase/MStatusDisplay.cc: - - fixed wrong "save as" in "open" dialog - - * mbase/MTaskInteractive.[h,cc]: - - added ReInit - - * mhflux/MAlphaFitter.cc: - - fixed the standard polynom order (0 instead of 1) for - difference histogram - - changed default start velue for gauss sigma in case of kThetaSq - - * mhflux/MHAlpha.cc, mhflux/MHCollectionArea.cc, - mhflux/MHEffectiveOnTime.cc, mhflux/MHThetaSq.cc, - mjobs/MJCut.cc: - - enhanced zenith angle range - - * mhflux/MHFalseSource.h: - - made GetCatalog protected - - made SetOffData virtual - - * mhflux/MHThreshold.cc: - - enabled Sumw2 - - * mjobs/MJCut.cc: - - removed BinningEnergyEst - - * mpointing/MPointingPos.h: - - added copy constructor - - * mpointing/MSrcPosCorrect.cc: - - added a comment - - * mranforest/MRFEnergyEst.[h,cc]: - - now stores the mean energy of the bins in the forest - - implemented several interpolation methods - - - - 2005/06/28 Thomas Bretz - - * mfilter/MFMagicCuts.[h,cc]: - - first full implementation... updates to come. - - * mhbase/MH.[h,cc]: - - added new member function to set several palettes - - * mhflux/MHDisp.[h,cc]: - - fixed z-axis dscription - - rotate filling off data by 180 deg. - - implemented subtracting off-data from on-data - - set different palettes - - * mhflux/MMcSpectrumWeight.[h,cc]: - - implemented additional weight for zenith-angle- and size-bins - - - - 2005/06/27 Thomas Bretz - - * macros/optim/optimenergy.C: - - changed algorithm from Simplex to Migrad - - fixed a typo (RunDisp) - - * mhflux/FluxLinkDef.h, mhflux/Makefile: - - added new class for threshold calculation - - * mhflux/MHCollectionArea.cc: - - replaced BinningEnergy by BinningEnergyEst - - * mimage/MHHillasSrc.cc: - - set minimum of fAlpha, fCosDA and fDCADelta to 0 - - * mjobs/MDataSet.cc: - - improved reading source position - - * mranforest/MRanForest.[h,cc]: - - implemented a value describing the forest (eg. corresponding - energy) - - increased ClassVersion - - * mtrigger/MFTriggerPattern.cc, mtrigger/MTriggerPattern.cc, - mtrigger/MTriggerPatternDecode.cc - - improved dox (thx to Nicola) - - * mjobs/MJStar.cc: - - implemented a new write task which only writes the effective - on time. This is necessary otherwise for example the image - cleaning could skip effective on-time events. - - - - 2005/06/17 Thomas Bretz - - * mbase/MArgs.[h,cc]: - - handle possible char \015 in arguments - - * mdata/MDataArray.h: - - added Print function to //*MENU* - - * mhflux/MAlphaFitter.[h,cc]: - - added new Option for Scale: Fixed - - fixed typo in IsEnvDefined for Signalfunction - - * mhist/MHCamera.cc: - - plot profile in deg instead of mm - - * mjobs/MDataSet.[h,cc] - - changed error handling when reading source catalog - - * mjobs/MJCut.cc: - - added MImagePar to output - - take new error handling into account when reading source catalog - - * mjobs/MJSpectrum.cc: - - print energy estimator - - removed the double minus displaying the fitted spectrum - - * mjoptim/MJOptimizeDisp.cc, mjoptim/MJOptimizeEnergy.cc: - - print rule when optimization has finished - - * mmain/MBrowser.cc: - - replaced old path with new path to datacenter - - * mranforest/MRFEnergyEst.[h,cc]: - - store binning in new data member fBinning to avoid many calles - to atof - - - - 2005/06/15 Daniela Dorner - - * datacenter/macros/createdataset.C: - - added function to read in input from txt-file - - * datacenter/macros/insertdataset.C: - - fixed bug -> no new sourcenames can be inserted by this macro - - * datacenter/macros/writesequencefile.C: - - fixed small bug in logging-output - - - - 2005/06/13 Daniela Dorner - - * datacenter/macros/createdataset.C: - - added (macro to write simple datasetfile) - - * datacenter/macros/buildsequenceentries.C: - - fixed bug introduced 12.5.2005 - - * datacenter/scripts/copyscript: - - fixed bug - - - - 2005/06/13 Thomas Bretz - - * mcalib/MCalibrationHiLoCam.h: - - added Print to //*MENU* - - * mhflux/MHThetaSq.[h,cc]: - - added resources for fNumBinsSignal and fNumBinsTotal - - * mjobs/MJSpectrum.[h,cc]: - - implemented weighting in theta, so we get better statistics - - improved output - - added plotting other spectras - - * Makefile: - - added new directory mjoptim - - * manalysis/MEnergyEstimate.[h,cc]: - - derives now from a new more genral class MParameterCalc - - * manalysis/Makefile, manalysis/AnalysisLinkDef.h: - - added new class MParamterCalc - - * manalysis/MParameterCalc.[h,cc]: - - added new class MParamterCalc - - * mbase/MLog.cc: - - do not display 'underline' if fIsNull output - - * mhbase/MBinning.cc: - - removed some obsolete comments fixed old stylish SetBinningCos - - * mhflux/MAlphaFitter.[h,cc]: - - background fit can now be switched off - - removed some obsolete comments - - adapted Print output - - added new option to change signal function type - - adde new Strategy option: kGaussSigma - - * mhflux/MHAlpha.[h,cc]: - - output the gauss sigma to the parameter list - - * mhflux/MHThetaSq.h: - - mase InitMapping public (used in MJOptimizeDisp) - - * mjobs/JobsLinkDef.h, mjobs/Makefile: - - removed MJOptimize* - - * mjobs/MJOptimize.[h,cc]: - - allow minimization of something else than MinimizationValue - - * mjobs/MJOptimizeEnergy.[h,cc]: - - added class description with example - - added weighting task to RunEnergy (untested) - - * mtools/MChisqEval.[h,cc]: - - added comments - - print result in Postprocess - - allow to give a different name to the result - - * mjobs/MJOptimize*: - - finally moved to new dir mjoptim - - new class MJOptimizeDisp - - - - 2005/06/10 Daniela Dorner - - * datacenter/scripts/copyscript: - - adapt script to new machine - - - - 2005/06/10 Thomas Bretz - - * datacenter/macros/plotdb.C: - - set minimum and maximum also for ZA graph - - * mdata/MDataChain.cc: - - fixed a possible crash to to NULL-acess in GetDataMember - - * mhbase/MBinning.[h,cc]: - - added a new binning type "asin" which is used for the - ZA binning - - * mhflux/MAlphaFitter.cc: - - allow polynom order 1 - - improved result line in PaintResult - - * mhflux/MHAlpha.cc: - - call PaintResult also in DrawAll - - * mhflux/MHCollectionArea.cc: - - removede nonsense A_{eff} from plot - - * mhflux/MHDisp.cc: - - fixed a possible crash if fSrcPos==NULL - - * mhflux/MHAlpha.cc, mhflux/MHCollectionArea.cc, - mhflux/MHEffectiveOnTime.cc, mhflux/MHEnergyEst.cc, - mjobs/MJCut.cc: - - replaced SetEdgesCos by new SetEdgesASin (set the correct binning) - the old binning was not well aligned with the MC binning - - * mhflux/MMcSpectrumWeight.[h,cc]: - - added the possibility to set ZA-weights - (Could be improved calculating correst sine-weights) - - * mimage/MHVsSize.cc: - - fixed. Conc1 was incorrectly scaled - - * mjobs/MDataSet.h: - - added getter for TLists - - * mjobs/MJCut.cc: - - in non-wobble mode the hcalc2 had been wrrornously added - to the tasklist -> removed - - * mjobs/MJOptimize.h: - - added a comment for EnableTestTrain - - * mpointing/MSrcPosCam.[h,cc]: - - implemented Add member function - - * mranforest/MRFEnergyEst.[h,cc]: - - fixed a problem with the removal of the last columns - - implemented debug-mode - - interpolate energy in logarithmic grid - - removed Test function completely - - added ReadEnv - - * mranforest/MRanTree.[h,cc]: - - replaced some TMatrixFRow by TMatrixFRow_const - - * mpointing/MSrcPosCorrect.[h,cc]: - - added - - * mpointing/Makefile, mpointing/PointingLinkDef.h: - - added MSrcPosCorrect - - * mhflux/MHDisp.cc: - - fixed the scaling of the abs-limit of m3l above which - we assume that the 3rd moment is a good measurement for the - correct disp point - - - - 2005/06/08 Daniela Dorner - - * datacenter/scripts/checkstardone: - - fixed bug - - added check - - * datacenter/scripts/runstar, runcallisto, runganymed: - - added -v4 to commandlines - - - - 2005/06/07 Daniela Dorner - - * datacenter/scripts/runstar, runcallisto: - - fixed bug in filenumber calculation - - - - 2005/06/06 Daniela Dorner - - * datacenter/scripts/runganymed: - - fixed bug in second commandline - - - - 2005/06/03 Thomas Bretz - - * ganymed.cc: - - fixed the wrong printout of ganymed - - * mars.cc: - - allow to open a file via commandline - - * mars.rc: - - added some more comments - - * mcalib/MCalibrateRelTimes.cc: - - removed obsolete comments - - * mmain/MEventDisplay.cc: - - implemented muon analysis - - fixed a crash caused by the DF - - * mmain/Makefile: - - added -I../mmuon - - * mmuon/MMuonCalibPar.cc: - - updated Print output - - * mmuon/MMuonSearchPar.[h,cc]: - - updated print output - - added Paint function - - * mranforest/MRFEnergyEst.h: - - fixed thw wrong data types in setters - - * msignal/MExtractTimeAndChargeDigitalFilter.cc: - - don't try to find automatic weights without template file name - - * mjobs/MJStar.cc: - - set bit MFillH::kDoNotDisplay for fillmuon - - * mmuon/MHSingleMuon.[h,cc]: - - store function in hist - - added Paint member function - - - - 2005/06/03 - - * RELEASE 0.9.3 - - - - 2005/06/03 Thomas Bretz - - * mjobs/hilocalib_sp1.root, mjobs/hilocalib_sp1_mc.root: - - updated - - * callisto.rc: - - MJPedestalY2.MaxEvents: 2000 replaced by 5000 as in - callisto_Dec04Jan05.txt - - * manalysis/MMultiDimDistCalc.h: - - changes to layout - - * mbadpixels/MBadPixelsCalc.cc: - - improved sanity checks - - * mbase/MEvtLoop.cc: - - fixed a bug which could cause Eventloop to crahs if - parlist was not initialized - - * mdata/MDataArray.[h,cc]: - - added copy constructor - - * mhbase/MFillH.cc: - - made sure that no constructor can crash due to NULL pointers - - * mhbase/MHMatrix.[h,cc]: - - first check in AddColumn if the column is available. Afterwards - check whether it can be added - - added new interfaced to single rows - - * mhflux/MMcSpectrumWeight.cc: - - slight change to screen output - - * mjobs/MJPedestal.cc: - - slight change to screen output - - * mpedestal/MPedCalcPedRun.cc: - - fixed a bug which caused MC files not to work treat them now - as pedestal files (always) - - * mranforest/MRFEnergyEst.[h,cc]: - - improved the code and the interface - - * mranforest/MRanForestGrow.[h,cc]: - - derives now from MRead to be able to use the bar in the - display - - * mtools/MTFillMatrix.[h,cc]: - - allow to fill a single matrix with all events - - * datacenter/macros/plotdb.C: - - display values versus Mean of ZdMin and ZdMax instead of ZdMin - - - - 2005/06/02 Markus Gaug (2005/06/01) - - * mcalib/MCalibrationChargeCalc.cc - - lower fgPheErrLowerLimit from 9.0 to 6.0. This is necessary to - exclude 2 very ringing pixels in September which - when kept - - destroy the image cleaning around them. - - - - 2005/06/02 Markus Gaug (2005/05/31) - - * mjobs/MJCalibration.cc - - The MFTriggerPattern filters out all events taken with the - CT1-pulser and data format version greater than 4. - Demand now that the filter is put into the task list only if the - calibration colour is not kCT1. - - - - 2005/06/02 Markus Gaug (2005/05/26) - - * mpedestal/MPedCalcPedRun.cc - - fixed bug in recognition of pedestal bit - affects only intensity - calibration. - - * mhcalib/MHCalibrationChargeCam.cc, - mhcalib/MHCalibrationRelTimeCam.cc: - - do not draw to status display if histogram is empty. This - caused some error messages from root. - - - - 2005/06/02 Thomas Bretz - - * callisto.cc: - - made "-raw" the default - - switched bad pixel check on for MJPedestalC2 - - * callisto_Dec04Jan05.rc: - - reduced MJPedestalY2.ExtractWinRight from 4.0 to 2.0 - - * mhflux/MHThetaSq.[h,cc]: - - added missing InitMapping - - * mjobs/MJCalib.cc: - - set default for fDataFlag to kIsUseRawData - - * mjobs/MJOptimizeCuts.cc: - - added some sanity checks if CreateHistNew couldn't create - the histogram - - * mjobs/MJPedestal.[h,cc]: - - implemented a possible deadpixel check - - * star.rc: - - added a missing template line - - * mbadpixels/MBadPixelsCalc.[h,cc]: - - changed to allow different upper and lower cuts in pedestal - variance - - * mfilter/MFCosmics.cc: - - allpix were not increased correctly if a saturated pixel - was skipped - - * mjobs/MJCalibrateSignal.cc: - - changed name of "Interp'd" to something more accurate - - * msignal/MExtractFixedWindow.cc:; - - removed case 12 for logain resolution as it is in bcn cvs - but nowhere documented - - * callisto.rc: - - added new template line for dead pixel check - - added correction factor determined from Muon analysis - - * callisto_Dec04Jan05.rc - - added correction factor determined from Muon analysis - - * mhflux/MMcSpectrumWeight.cc: - - small change to output - - - - 2005/06/01 Thomas Bretz - - * mjobs/MJOptimize.[h,cc]: - - moved code for cut optimization to MJOptimizeCuts - - moved code for energy optimization to MJOptimizeEnergy - - * mjobs/MJOptimizeCuts.[h,cc], mjobs/MJOptimizeEnergy.[h,cc]: - - added - - * mjobs/Makefile, mjobs/JobsLinkDef.h: - - added MJOptimizeCuts - - added MJOptimizeEnergy - - * showplot.cc: - - set window name to input file name - - * mcalib/MCalibColorSet.cc: - - changed order of checks so that an explicit color is - prior to any automatic detection. - - * mcalib/MCalibrateData.[h,cc]: - - implemented setting a possible additional scale factor - (for MC it is always reset to 1) - - * mfilter/MFCosmics.cc: - - don't count saturated hi-gain pixels at all. It should - not be necessary, because such pixels should have a value - high enough in the high-gains but it seems sometimes they don't - - * mhflux/MHAlpha.[h,cc]: - - changed some orders in header - - made some private data members protected - - Call GetVal() if fMap[0]<0. This is necessary if the fill - value is calculated on-the-fly (like ThetaSq) - - made InitMapping virtual - - * mhflux/MHDisp.cc: - - removed 'Get-Entries' workarund - - changed the function integartion for the significance - - * mhflux/MHThetaSq.[h,cc]: - - overwrite InitMapping because ThetaSq should be read from - the parlist always - - * mimage/MHHillas.cc: - - set histogram minimum of Delta to 0 - - * mpedestal/MPedPhotCam.cc: - - check for unsuitable pixels when calculating the means not - only for the UnsuitableRun ones - - * msignal/MExtractor.cc: - - replaced wrong %2d by %2f - - - - 2005/06/01 Daniela Dorner - - * datacenter/scripts/runcallisto: - - added writing html-logs - - added --auto-time-stop for merpping(ccupdate) - - * datacenter/scripts/runganymed: - - added writing html-logs - - added second execution of ganymed - - adapted to correct usage of config-files - - fixed bug - - * datacenter/scripts/runstar: - - added writing html-logs - - minor change in logpath - - - - 2005/05/31 Daniela Dorner - - * datacenter/macros/fillstar.C, plotdb.C: - - added two new parameters - - * datacenter/macros/setupdb.C: - - adapted to changes in DB (added two columns) - - - - 2005/05/31 Thomas Bretz - - * mfileio/MReadReports.[h,cc]: - - changed such that it can force prereading of the first event of - a sequence after PreProcess - - * mfileio/MReadTree.h: - - added some comment about the new bits used in MReadReports - - * mhflux/MHDisp.cc: - - changed fit limit from 1.1 to 1.0 - - fixed access to wrong axis - - * mhflux/MHEffectiveOnTime.cc: - - fixed a bug which caused the first bin of the histograms - vs time to disapear in PostProcess, which gave wrong results - on the screen. The output and all following programs not - directly accessing the histograms haven't been affected - - * mjobs/MJCalib.cc: - - HasEnv for boolean type resources is obsolete and has been - removed - - * mjobs/MJCalibrateSignal.cc: - - removed MPointingPosInterpolate - - adapted usage of MReadReports to changes - - * mjobs/MJCut.cc, mjobs/MJStar.cc: - - adapted usage of MReadReports to changes - - made Drive-tree a 'required' tree - - * mjobs/MJStar.cc: - - removed "Events" from setting up rate and effective on time - tasks to tlist2. It is obsolete because calibration events - don't enter star at all. - - * mpointing/MPointingPosCalc.[h,cc]: - - assume that the run-type is real-data if Process is called before - ReInit - - * merpp.cc: - - new options: --auto-time-start --auto-time-stop - - * mbadpixels/MBadPixelsTreat.cc: - - removed the checks in the algorithm whether the current pixel - is NULL. MSignalCam doesn't support zero supression anymore. - GetPixById has been replaced by the []-operator - - - - 2005/05/30 Thomas Bretz - - * msql/MSQLServer.cc: - - added possibility to setup SelectDatabase from resource file - - * mbadpixels/MBadPixelsCalc.[h,cc]: - - implemented the possibility to use the check routine - from outside - - check now returns kFALSE if more than 50% of all - pixels are marked as unsuitable - - * mhflux/FluxLinkDef.h, mhflux/Makefile: - - added MHDisp - - added MMcSpectrumWeight - - * mhflux/MHFalseSource.[h,cc]: - - allow finding of Off-plot for derived classes - like in MHAlpha - - get source position from MSourcePos if existing - - changed some data members from private to protected - - * mhflux/MHDisp.[h,cc]: - - added - - * mjobs/MJCut.[h,cc]: - - implemented new option (HistNameFS) to allow using a different - False Source Plot - - * mpedestal/MPedPhotCam.[h,cc]: - - added a copy constructor to allow conversion from MPedestalCam - - * mpointing/MSrcPosCam.[h,cc]: - - added copy constructor - - - - 2005/05/30 Daniela Dorner - - * datacenter/scripts/buildsequenceentries, checkstardone, correcttime, - doexclusions, fillcallisto, insertdatasets, runganymed, - checkfilesforsequenceavail, copyscript, filesondisk, fillstar - runcallisto, runstar, writesequencefiles: - - moved two variables from the scripts to the sourcefile - - * datacenter/scripts/runganymed: - - changed # of processes - - * datacenter/macros/buildsequenceentries.C, filldotrbk.C, fillstar.C, - insertcacofile.C, plotdb.C, setstatus.C, checkfileavail.C, - doexclusions.C, filldotrun.C, findcacofiles.C, insertdataset.C, - resetallruns.C, setupdb.C, checkstardone., fillcalib.C, - fillsignal.C, getdolist.C, insertdate.C, resetcolumn.C, - writesequencefile.C: - - adapted the macros to the changes in msql/MSQLServer.cc - - * datacenter/macros/fillstar.C: - - adapted the functions for the myon parameter after the bugfixes - in the calibration - - - - 2005/05/27 Daniela Dorner - - * datacenter/macros/plotdb.C: - - changed binning of fConvFactorInner - - added plot vs ZdMin - - * datacenter/macros/resetcolumn.C: - - added (macro to reset value in the DB) - - * datacenter/scripts/runganymed: - - removed command line option for ganymed, which is default now - - - - 2005/05/27 Javier Rico (2005/05/26) - - * mbadpixels/MBadPixelsCam.cc - - fixed small bug in the Print() function (one line was printed out - at a wrong place). (M. Gaug) - - - - 2005/05/27 Javier Rico (2005/05/24) - - * mhcalib/MHCalibrationHiLoCam.cc - - do not write Arrays if flag kOscillations is not set. - (this was actually a bug since it caused a huge usage for large - amounts of data). (M. Gaug) - - * mcalib/MCalibColorSet.cc - - set colour already in the ReInit(), needed by the digital filter - later. (M. Gaug) - - * mjobs/MJCalibration.cc - - forgot to merge hi-lo calibration factors for intensity calibration. - (M. Gaug) - - * mhcalib/MHCalibrationCam.[h,cc] - - do not Finalize histograms if a flag kReset is set. Caused wrong - result in last run of intensity calibration. (M. Gaug) - - * msignal/MC_calibration_weights_UV.dat - - Removed. It was confusing to have this file since it was just a - copy of calibration_weights_UV.dat. For MC calibration you can - just use the same weights files as for real data. (A. Moralejo) - - * msignal/calibration_weights_blue46.dat - - added missing weights file (M. Gaug) - - - - 2005/05/27 Markus Gaug (2005/05/21) - - * mcalib/MCalibrationChargePix.[h,cc] - - allow setting of extractor resolution in CalcReducedSigma() - - * mcalib/MCalibrationChargeCalc.[h,cc] - - implement usage of extractor resolution (only if UseExtractorRes - is set). - - - - 2005/05/27 Thomas Bretz - - * Makefile: - - removed mmontecarlo directory - - * mmontecarlo/MMcEnergyEst.[h,cc], - mmontecarlo/MMcTimeGenerate.[h,cc], - mmontecarlo/MMcWeightEnergySpecCalc.[h,cc]: - - removed - - * sponde.rc: - - added new line for weighted spectral index - - * mbadpixels/MBadPixelsCalc.[h,cc]: - - added an option to perform the checks also in PostProcess - - * mhbase/MFillH.h: - - added default argument to SetWeight - - * mhbase/MH3.h: - - added Sumw2() member function - - * mhflux/MHCollectionArea.[h,cc]: - - added TLatex output to plots - - added some Getter - - * mjobs/MJSpectrum.[h,cc]: - - implemented the possibility to weight the monte carlo spectrum - to a new index or function. More details can be found - in MMcSpectrumWeight - - slightly changed the plot comparing the size distributions - - scale the comparsison plots by the resulting spectrum - - * mjobs/MJob.[h,cc]: - - added a member function to check ReadEnv of a single - container - - * mjobs/Makefile: - - added -I../mmc - - * mmc/MMcEvt.[hxx,cxx], mmc/McEvtBasic.[hxx,cxx]: - - changed the inheritance: MMcEvt now derives from MMcEvtBasic - so that both classes are interchangable - - increased both class versions - - chaged the default partictle in MMcEvtBasic from - kGAMMA to kUNDEFINED - - added new particle type: kUNDEFINED - - * mhflux/MMcSpectrumWeight.[h,cc]: - - added - - * callisto_Dec04Jan05.rc: - - commented MJPedestalC1.ExtractSignal.FallTimeHiGain - because it is the dfeault now - - * msignal/MExtractTimeAndChargeSpline.cc: - - changed default of fgFallTimeHiGain to 0.5 - - * mimage/MHillasSrc.h: - - added copy constructor and Copy function - - * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc]: - - implemented reading of automatic weights file following an - idea of Markus G. - - * mjobs/MJPedestal.cc: - - fixed the reading of the resource file fopr the extractor - (reading the extractor from file can overwrite the seetings) - - * msignal/MC_weights46.dat: - - updated from BCN cvs - - * msignal/Makefile: - - added -I../mcalib - - * callisto.rc: - - updated comments - - * mcalib/MCalibrateData.[h,cc]: - - same small changes to layout - - mainly unrolled Form-statements - - * msignal/MExtractFixedWindow.cc: - - added case 12 and a default for logain setting the - extractor resolution (partly taken from bcn cvs) - - - - 2005/05/25 Thomas Bretz - - * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, - readraw.cc, sponde.cc, star.cc: - - made the output about the root version clearer - - * mbase/MEvtLoop.cc: - - call CallProcess instead of Process for the mail tasklist - (this makes sure that all counters are correct) This should - NOT be done for Pre/PostProcess - - * mbase/MStatusDisplay.cc: - - fixed a possible crash if padsave==NULL - - fixed the missing first tab in postscript files - - * mbase/MTask.cc: - - initialize fNumExec0 with 0 (this was the reason why the - missing CallProcess in MEvtLoop didn't seem to have any effect - on the possible printing of the statistics - - * mhflux/MAlphaFitter.cc: - - improved output - - * mhflux/MHEffectiveOnTime.cc: - - added some eMail from Wolfgang about treating the calibration - events to the class description - - removed some debug output in Paint() - - * mhflux/MHThetaSq.cc: - - replaced \\theta by \\vartheta - - * mhvstime/MHPixVsTime.cc: - - fixed a bug found by marcos: the error bars weren't retrieved - correctly (instead of fTypeErr fType was requested) - - * mjobs/MJStar.cc: - - do not use calibration events for rate and effective-on-time - calculation - - * mjobs/MJob.cc: - - added some debug output to ExpandPath - - * msignal/MExtractTime.h, msignal/MExtractTimeAndCharge.h, - msignal/MExtractor.h: - - added Print() to //*MENU* - - - - 2005/05/25 Daniela Dorner - - * datacenter/macros/fillcalib.C, setupdb.C: - - changed presicion of parameter - - * datacenter/macros/plotdb.C: - - added (macro to plot quality paramter from the DB) - - - - 2005/05/24 Daniela Dorner - - * datacenter/macros/fillstar.C: - - added new parameters - - * datacenter/macros/setupdb.C: - - added variables for the new parameters - - - - 2005/05/23 Daniela Dorner - - * datacenter/scripts/fillstar: - - fixed bug in path - - * datacenter/macros/fillstar.C, fillcalib.C, fillsignal.C: - - added check - - * datacenter/macros/fillcalib.C, setupdb.C: - - adapted variables for the conversion factor - - - - 2005/05/20 Thomas Bretz - - * RELEASE 0.9.2 - - - - 2005/05/20 Daniela Dorner - - * datacenter/scripts/insertdatasets,checkstardone: - - adapted paths for release - - * datacenter/macros/fillstar.C: - - adapted functions to calculate psf and the ratio - - * datacenter/scripts/runganymed: - - adapted ganymed command - - - - 2005/05/20 Thomas Bretz - - * msignal/MExtractTimeAndChargeSlidingWindow.cc - - increased log-gain window from 6 to 8 according to an - UNDOCUMENTED change in the bcn cvs - - * mhcalib/MHCalibrationChargePINDiode.cc: - - removed a check in fill according to an UDOCUMENTED change - in the bcn cvs - - * mhcalib/MHCalibrationChargePINDiode.cc: - - use a dynamic_cast for the Fill-argument - - * mjobs/MJCalibration.cc: - - shortened output line telling file name of hi-/lo-gain - calibration - - * mjobs/MJPedestal.[h,cc]: - - moved code for PulsePosCheck into own function - - put also code for pixel check into this function - - added a sanity check for fExtractor at some places - - * msignal/MExtractor.cc: - - added output of pedestal container - if available - in Print() - - improved format of Print() output - - * mbase/MEvtLoop.[h,cc]: - - removed the obsolete (it was never been used) argument from - PreProcess - - replaced the second obsolete argument in Eventloop by a flag - whether statistics should be printer or not: default=kTRUE - - Print statistics automatically in Eventloop if tasklists - Process has ever been touched. - - * mjobs/MJCalibTest.cc, mjobs/MJCalibration.cc, MJCalibrateSignal.cc, - mjobs/MJCut.cc, mjobs/MJOptimize.cc, mjobs/MJPedestal.cc, - mjobs/MJSpectrum.cc, mjobs/MJStar.cc: - - removed call to PrintStatistics - no done automatically in - MEvtLoop - - * mpedestal/MExtractPedestal.cc: - - removed InitArrays after ReInit of fExtractor. It is done there - automatically - - * mjobs/MJCalibrateSignal.cc: - - don't add pinext and bldext to tasklist if not necessary - (UNDOCUMENTED change from bcn cvs) - - * callisto.rc, callisto_Dec04Jan05.rc: - - replaced wrong MaxHiGainVar by MaxSignalVar (was nowehere - really used) - - * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc: - - some simplifications to the access of histograms after the loop - has finished. There is no need to search for them in the parameter - list. - - * mjobs/MJCut.cc: - - fixed the file-path when writing the status display and an - output path was given. - - * mjobs/hilocalib_sp1.root: - - new intercalibration constants due to the latest bug-fixes - - * manalysis/MCameraData.[h,cc]: - - removed all stuff depending on MSigmabar - - * manalysis/MSigmabar* - - removed - - - - 2005/05/20 Markus Gaug (2005/05/19) - - * mjobs/MJPedestal.cc: - - fixed an important bug in the setting of the incoming pedestal - pointer to the signal extractor. This bug caused the pedestals not - to be subtracted correctly in the calibration afterwards. The - effect was about 10% too high conversion factors for the digital - filter and the spline and more than 40% for the sliding window. - The bug existed since end of February! (Markus G.) - - - - 2005/05/20 Markus Gaug (2005/05/18) - - * mcalib/MCalibrationChargeCalc.cc - - issue a warning if no colour has been set until the PostProcess. - (happens to old MC files). - - - - 2005/05/19 Markus Meyer - - * mmuon/MHMuonPar.cc: - - add a second integral in the function paint, which is - plotted in the MStatusDisplay - - - - 2005/05/19 Daniela Dorner - - * datacenter/macros/fillstar.C: - - add new parameter - - * datacenter/macros/setupdb.C: - - adapted to new column in db - - * callisto_Dec04Jan05.rc: - - set value for MJPedestalY2.MaxEvents from 2000 to 5000 to get - better statistics for the calculation of the mean pulse time - of the cosmisc - - * datacenter/scripts/runganymed: - - fixed bug in path - - - - 2005/05/19 Thomas Bretz - - * msignal/MExtractTimeAndCharge.cc: - - simplified a really cryptical use of the ?:-operator when - the fLoGainFirst is calculated - - fixed a bug introduced in the calculation of the derivatives - - * mmain/MEventDisplay.cc: - - removed MC trigger display - - * mbase/MTaskList.[h,cc]: - - member function to use MTaskList in a TIter - - * mhflux/MAlphaFitter.[h,cc]: - - improved the output line plotted into the histogram - - implemented getter for fSigInt - - start integration in first bin not in underflow bin - - added 'background' option for scaling - - * mhflux/MHAlpha.[h,cc]: - - added some comments - - improved DistancetoPrimitive - - * mhflux/MHThetaSq.[h,cc]: - - derives the binning now from the cut value or the MAlphaFitter - - * mjobs/MJStar.cc: - - moved weather data histogram back to the end - otherwise - MEventRate is not initialized before - - - - 2005/05/18 Thomas Bretz - - * mcalib/MCalibCalcFromPast.cc: - - added missing fIntensQE to list of initialization in - constructor - - * mcalib/MCalibrateData.cc: - - fixed a bug which caused kNo to be ignored - - removed a second check for the size of the badpixelcam - - * mjobs/MJCalibrateSignal.cc: - - removed the obsolete second adding of filhil and filpul to - the tasklist - - * mjobs/MJCalibration.cc: - - do not display result or statistics if no execution has taken - place - - * mjobs/MJStar.cc: - - moved processing of CC-branch to the beginning of the tasklist - - * msignal/MExtractTimeAndChargeSpline.[h,cc]: - - introduced some small changes to the validity range of - some variables - - determin the higher bound above which no search is done - analog to the lower bound using the fall-time - - CalcIntegral[Hi,Lo]Gain now returns sum. No need for a reference - - fixed calling Integral[HI,Lo]Gain in cases we are at the edge of - the valid range -- at a lot of position in the code random memory - above or below the arrays have been accessed. - - improved the numercila stability of CalcIntegral[Hi,Lo]Gain - more by calculating the number of steps from the rise and fall time. - this should at least give consistent results on the same machine! - - * mbase/MContinue.cc: - - fixed a namimg problem of the filter when it is added to - the tasklist and has the same name as MContinue - - * mcalib/MCalibrationChargeCalc.cc: - - for some sceen output the manipulator (inf) was missing - - * msignal/MExtractPINDiode.cc, mcalib/MCalibrationChargeCalc.cc, - mcalib/MCalibrationChargeCam.cc: - - fixed a problem with the fit (it always tried to display - the fit-function somewhere) - - - - 2005/05/17 Thomas Bretz - - * callisto.rc, callisto_Dec04Jan05.rc: - - added new comments diescribing setup of MFCosmics - - * mfilter/MFCosmics.[h,cc]: - - skip bad pixels using MBadPixelsCam - - implemented a check in PostProcess about the fraction - of events which survived or were rejected - - added ReadEnv for setup - - * mfilter/Makefile: - - added mbadpixels - - removed mmain and manalysis - - * mhcalib/MHCalibrationChargeCam.h: - - removed numbers from data member descrition -- too much - to maintain - - * mhcalib/MHCalibrationChargePINDiode.h: - - incremented version number (undocumented from bcn) - - * mjobs/MJCalibration.cc: - - reorganized some TText output (undocumented from bcn) - - overwrite the default of MaxNumberEmptyPixels by 0.05 - (undocumented from bcn) - - print tasklist statistics also if eventloop returned - KFALSE - - * msignal/MExtractTimeAndChargeDigitalFilter.cc: - - changed fgLoGainStartShift from -2.8 to -1.8 - (undocumented from bcn) - - * msignal/MExtractTimeAndChargeSlidingWindow.h: - - increased version number from 0 to 1 (undocumented from bcn) - - - - 2005/05/17 Markus Gaug (2005/05/16) - - * msignal/MExtractor.[h,cc] - - introduce two new variables: fResolutionPerPheHiGain and - fResolutionPerPheLoGain, to be set by deriving extractors. - - set version number one higher. - - * msignal/MExtractFixedWindow.[h,cc] - * msignal/MExtractTimeAndChargeSlidingWindow.[h,cc] - * msignal/MExtractTimeAndChargeSpline.[h,cc] - * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - - set the variables fResolutionPerPheHiGain and - fResolutionPerPheLoGain - - * msignal/MExtractPINDiode.[h,cc] - - adapt to current PIN Diode signal, fit signal with Gaussian - - set version number up by one. - - * msignal/MExtractedSignalPINDiode.[h,cc] - - set new data member fExtractedChi2 - - set version number up by one. - - * mhcalib/MHCalibrationChargePINDiode.cc - - adapt one function to newly used names. - - adapt signal tests. - - * mjobs/MJPedestal.[h,cc] - - read MBadPixelsCam together with extractor, if exisiting - (necessary for bad pixels exclusion in pulse position search). - - * mjobs/MJCalibration.[h,cc] - - use MFCosmics in any case (not only for CT1-pulses) and apply - a quality criteria depending on number of rejected events: - MaxExcludedEvents (default: 50%). - - - - 2005/05/17 Daniela Dorner - - * datacenter/macros/setupdb.C - - adapted to new column in datasetstatus-table - - * datacenter/macros/checkstardone.C - - added (macro to check if star has been done for a sequence) - - * datacenter/scripts/checkstardone - - added (script that executes checkstardone.C for all datasets - - * datacenter/scripts/checkfilesforsequenceavail, fillcallisto, - fillstar - - fixed bug - - * datacenter/scripts/buildsequenceentries, doexclusions, - writesequencefiles - - adapted paths - - * datacenter/scripts/insertdataset - - added logging - - * datacenter/scripts/runganymed - - added (script to run ganymed automatically for datasets) - - * datacenter/scripts/runcallisto - - adapted paths - - fixed bug - - * datacenter/scripts/runstar - - adapted paths - - fixed bug - - * steps.rc - - adapted resource file to needs of the new table in db - - - - 2005/05/13 Daniela Dorner - - * datacenter/macros/insertdataset.C - - added (macro, that inserts dataset into db) - - * datacenter/macros/setupdb.C - - adapted to new table in db - - * datacenter/scripts/insertdatasets - - added (script, that inserts datasets into db) - - * datacenter/scripts/sourcefile - - added (file with commands and variables, that are needed by all - scripts) - - * datacenter/scripts/buildsequenceentries, checkfilesforsequenceavail - copyscript, correcttime, doexclusions, - filesondisk, fillcallisto, fillstar, runcallisto - runstar, writesequencefiles - - adapted scripts to the usage of the sourcefile - - * datacenter/macros/fillcalib.C: - - changed name of histogram according to change of Markus - - removed debugoutput - - - - 2005/05/13 Thomas Bretz - - * mreport/MReportCC.cc: - - fixed reading of rep-files for versions newer than V200404070 - - * mpointing/MSrcPosCalc.cc - - took a bugfix from Wolfgang to Loc0LocToCam and implemented it - Wolfgang: the results are changed only minimally - - * msignal/MExtractTimeAndChargeSpline.cc - - integration ranges were shifted by 0.2 FADC slices to the right. - Fixed in the new algorithm according to Markus' change. - - * mcalib/MCalibrationChargeCalc.h: - - Incremented ClassVersion number by 1 - - * mhcalib/MHCalibrationPulseTimeCam.cc: - - removed a commented debug output - - * mjobs/MJCalibration.cc - - new undocumented adjust of "Unsuitable"- and "Unreliable"-displays - for new exclusion criteria taken from bcn - - * manalysis/MEventRateCalc.cc: - - some fixes. In some cases the event rate wasn't calculated - anymore - - * mbadpixels/MBadPixelsCalc.cc: - - fixed a bug when checking whether the check should be done - or not (>0 was missing) - - * mhist/Makefile: - - added MHWeather - - * mhvstime/MHVsTime.[h,cc]: - - implemented new function the set minimum - - * mjobs/MJStar.cc: - - read weather data (CC tree) - - set minimum of rate-display to 0 - - display weather data for non-MC files - - * mmuon/MHSingleMuon.cc: - - slight change to a comment - - * callisto.rc: - - added new possible setup - - * callisto_Dec04Jan05.rc - - added new possible setup - - use default for MJCalibration.ExtractSignal.LoGainSwitch - - * mbadpixels/MBadPixelsCalc.cc: - - exclude unsuitable pixels from mean/rms calculation - - changed the lower bound for the second mean loop from - 0.5 to 0.66 - - * mbadpixels/MBadPixelsCam.cc: - - added case 102 returning the global unsuitable status - of an event - - * mhist/MHCamEvent.h: - - added default 0 to SetThreshold - - * mjobs/MJCalibrateSignal.cc: - - use new case 102 for unsuitable display - - enable counting (to get the correct display also with - profile option switched on) - - * mraw/MRawRunHeader.cc: - - after displaying millions of hex numbers switch back to dec - - - - 2005/05/13 Markus Gaug (2005/05/12) - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - set default extraction range in the high gain to 4. - - set default weights file to cosmics_weights46.dat - - * mhcalib/MHCalibrationHiLoCam.cc - - set Oscillations to kFALSE - - * mhcalib/MHCalibrationChargeCam.cc - - set default for fNumHiGainSaturationLimit to 0.15 - - * mjobs/MJCalibrateSignal.[h,cc] - - put MHCalibrationHiLoCam and MHCalibrationPulseTimeCam directly - into tasklist if needed. Otherwise, it does not read the - resources from the config. file. - - - 2005/05/11 Markus Gaug (2005/05/11) - - * mjobs/MJPedestal.cc - - adjust the fit ranges for the histogramming with moon data slightly. - - * mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationChargeCalc.cc - - make a distinction between newly excluded pixels (by calibration) - and previously excluded pixels in the displays and print-functions - - * mcalib/MCalibrationChargeCalc.cc - - introduce the check for fluctuating arrival times. - - set charge limit to from 2.5 to 4.5 - - introduce asymmetric exclusion due to "deviating number of phes": - Default: -9.0 +4.5 - - make deviating number of phes unsuitable (see David's findings). - - * mbadpixels/MBadPixelsPix.h - - add kDeviatingNumPhes to function GetUnsuitableCalLevel() - - - - 2005/05/13 Daniela Dorner - - * datacenter/scripts/runstar - - fixed bug in the calculation of the number of to-do-files - - * datacenter/scripts/runcallisto - - fixed bug in the calculation of the number of to-do-files - - - - 2005/05/12 Daniela Dorner - - * datacenter/macros/fillcalib.C: - - removed debugoutput - - * datacenter/macros/fillstar.C: - - added (macro to read parameters from the star*.root files and - fill them into the db) - - * datacenter/macros/setupdb.C: - - added new table 'Star' - - * datacenter/macros/buildsequenceentries.C: - - added delete-query for new table 'Star' in the delete function - - * datacenter/scripts/runstar - - changed number of processes - - * datacenter/scripts/runcallisto - - changed number of processes - - * datacenter/scripts/fillstar - - added (script to run macro fillstar.C automatically) - - - - 2005/05/12 Thomas Bretz - - * mcalib/MCalibrationChargeCam.cc: - - fixed a bug in FinalizeArrivalTime which caused Form() to hang - - * mmuon/MHMounPar.[h,cc] - - added a line showing a reference shape - - * star.rc: - - added setup strings for software trigger - - * mbase/MContinue.cc: - - allow setup of already set filters in ReadEnv. They must not - necessarily be already in the tasklist - - * mcalib/MCalibrationChargeCalc.cc: - - shortened a lot of Form() calls to reduce the risk of - memory corruption - - * mjobs/MJCalibration.cc: - - some cosmetics to text in pad - - * mraw/MRawRunHeader.[h,cc]: - - a fix to MRawRunHeader because the definition of the - raw-data format has changed. fProjectName and fSourceName - has no trailig \0 anymore by default - - incremented ClassVersion by 1 - - - - 2005/05/12 Markus Meyer - - * mmuon/MHMounPar.[h,cc] - - added function Paint. This function integrates the TProfile - ArcWidth/Radius Vs. Radius between certain values and shows - the result in the Status Display - - * mmjobs/MJStar.cc - - changed the default values for the final muon cuts - - * star.rc - - changed the default values for the final muon cuts - - - - 2005/05/11 Thomas Bretz - - * mbase/MStatusDisplay.cc: - - fixed year of copyright - - * mcalib/MCalibCalcFromPast.cc: - - undocumented change from BCN: a new resource has been implemented - in ReadEnv (NumEventsDump) - - * mjobs/MJob.[h,cc]: - - added new static member function which can be used - to overwrite relative paths with a default - - - - 2005/05/11 Abelardo Moralejo (2005/05/11) - - * mjobs/MJPedestal.cc - - Fixed use of MFTriggerPattern: first, added it to the tasklist - (was missing); second, added to tasklist MTriggerPatternDecode - before MFTriggerPattern. This was the reason for the problems - reported by T. Coarasa on May 9. I do not know why the behaviour - of the previous version depended on compiler, but this seemed to - be the case... - - - - 2005/05/11 Markus Gaug (2005/05/11) - - * mjobs/MJCalibration.cc - - display in Tab "Conv" in the 3rd column the conversion to equiv. - phes instead of Cherenkov photons. - - * mjobs/calibrationref.rc, mjobs/calibrationref_Nov04.rc, - mjobs/calibrationref_Dec04.rc: - - add reference lines for the conv. to equiv. phes. - - * mcalib/MCalibrationChargeCam.cc, mcalib/MCalibrationChargeCalc.cc: - - make a distinction between newly excluded pixels (by calibration) - and previously excluded pixels in the displays and print-functions - - * mcalib/MCalibrationChargeCalc.cc - - introduce the check for fluctuating arrival times. - - set charge limit to from 2.5 to 4.5 - - - - 2005/05/10 Markus Gaug (2005/05/10) - - * mhcalib/MHCalibrationHiLoCam.cc - - ask for averageing and do not fill the arrays per pixel any more. - This caused too much memory usage for the calculation of the - high-gain low-gain inter-calibration constants. - - * mcalib/MCalibrationChargePix.[h,cc] - - store number of saturated events in the results container. - - set version number by one higher (due to new data member). - - * mhcalib/MHCalibrationChargeCam.cc - - store number of saturated events in the results container. - - allow reading of NumHiGainSaturationLimit and - NumLoGainSaturationLimit in ReadEnv - - set saturation limit from 5% to 8.5% - - * mbadpixels/MBadPixelsPix.h - - introduce new bits: kDeadPedestalRms, kPreviouslyExcluded, - kFluctuatingArrivalTimes - - * mbadpixels/MBadPixelsCam.cc - - set bit kPreviouslyExcluded in the AsciiRead-Function - - include three new bits in the Print() function - - * mjobs/MJCalibration.cc - - display excluded pixels from DeadPedestalRms in Defect-Tab. - - display correct error of the RMS/Mean charge diagramm. - - * mcalib/MCalibrationChargeCam.cc - - calculate the error of RMS/Mean values in GetPixelContent Nr.33 - - - - 2005/05/11 Hendrik Bartko (2005/05/09) - - * msignal/MC_weights46.dat - - updated weights file for digital filter with dedicated MC weights - with 4 slices for the high gain and 6 slices for the low gain - - - - 2005/05/10 Daniela Dorner - - * datacenter/macros/fillcalib.C: - - added some parameters (reading from calib*.root and inserting - into db) - - * datacenter/macros/setupdb.C: - - adapted macro to the new columns in the calibration db - - * datacenter/macros/fillsignal.C: - - fixed typo - - - - 2005/05/10 Markus Meyer - - * mmuon/*: - - update of the class documentation - - * mmuon/*: - - commented out the ArcLength and Estimpact (will be not - calculated for the moment) - - - - 2005/05/10 Thomas Bretz - - * mreport/MReportStarguider.cc: - - introduced the correct version which marked the fix of the - units of the nominal position - - * callisto.rc: - - introduced a new line for new option in MCalibColorFromPast - - * ganymed.cc: - - removed option "--full-display" -> now default - - * manalysis/MEnergyEstimate.cc: - - print the rule a bit earlier in PreProcess - - * mfilter/MFDeltaT.cc: - - fixed a typo in the output - - * mhflux/MAlphaFitter.cc: - - some improvements to output - - * mjobs/MJCut.cc: - - added ThetaSquared to output - - * mjobs/MJStar.cc: - - fixed bug in copying of OriginalMC tree - - * mmuon/MMuonCalibParCalc.cc: - - removed obsolete setting of ReadyToSave - - * mjobs/MJSpectrum.cc: - - made sure the correct type of MHAlpha is used - - - - 2005/05/10 Markus Gaug (2005/05/09) - - * mjobs/hilocalib_sp1.root - * mjobs/hilocalib_sp1_mc.root - - new hi-lo intercalibration files with the fixed spline extractor. - - * mjobs/hilocalib_df46_mc.root - - new hi-lo intercalibration files from MC with the left out -O5 - option. (The real data files had already the correct executable). - - - - 2005/05/10 Hendrik Bartko (2005/05/09) - - * msignal/MC_weights46.dat - - NEW weights file for digital filter with dedicated MC weights - with 4 slices for the high gain and 6 slices for the low gain - - - - 2005/05/10 Markus Gaug (2005/05/08) - - * mhcalib/MHCalibrationCam.[h,cc] - - introduce parameters fLowerFitLimit and fHigherFitLimit to - tell explicitly from outside to fit functions in a certain - range. If both are 0. (default), the histogram limits define - the fit limits (as before). - - - - 2005/05/10 Abelardo Moralejo (2005/05/07) - - * mcalib/MMcCalibrationCalc.cc - - in Process, fixed wrong estimate of true number of "equivalent - photoelectrons" (correctedphotel). This worked roughly OK as long - as the file used for calibration was a (noiselesss) gamma file, - because most light is contained in the inner camera and the - problem was related to the light going into the outer pixels. So - results are not much affected, unless one uses for calibration - a file with events having a lot of light in the outer camera. - Thomas Hengstebeck noticed this problem when he used a file of MC - calibration pulses in mccalibrate.C - - * manalysis/MMcCalibrationUpdate.[h,cc] - - Added possibility to set the hi to lo gain conversion factor. - Until now the factor was simply the ratio of pulse areas as read - from MMcFadcHeader. This of course is not the factor to be applied - to the extracted signals unless the extractor integrates the full - pulse in both high and low gain. The factor depends then on the - extractor, and the user has to find out what its value is. - Set as default calibration type kPhe. - - * macros/mccalibrate.C, starmc.C - - Added the setting of the hi to lo gain conversion factor (see - above). For now it has to be calculated by the user. However, it - is strongly recommended from now on to use always callisto for the - calibration of real data, and not these macros. These are kept - just for checking purposes, mostly by "experts". - - - - 2005/05/10 Robert Wagner (2005/05/06) - - * mreport/MReportStarguider.[h,cc]: - - Bugfix: Sequence of extracting fDevZd and fDevAz (switched) - - - - 2005/05/10 Markus Gaug (2005/05/05) - - * mcalib/MCalibCalcFromPast.[h,cc] - - introduce flag "fUpdateWithFFactorMethod" which allows to use the - entire results obtained with the F-Factor method (including a new - number of mean photo-electrons). This possibility is switched on - (only) if somewhere in the callisto.rc file the following line is - written: - MJCalibrateSignal.MCalibCalcFromPast.UpdateWithFFactorMethod: yes - (Default is still the old way of adjusting the relative extracted - charges w.r.t. the mean charge over the inner camera). - - - - 2005/05/10 Markus Gaug (2005/05/02) - - * mcalib/MCalibrationChargeCam.[h,cc] - - added new function MergeHiLoConversionFactors - - * mcalib/MCalibColorSteer.[h,cc] - - introduce copying of hi-lo calibration factors from one cam to - the next in intensity calibration. - - added storage of averageing histograms of flag fHistStorage is - set - - * mcalib/MCalibrationIntensityCam.[h,cc] - - introduce place for storage of averageing histograms (if wanted). - - - - 2005/05/09 Markus Meyer - - * mmuon/MHSingleMuon.cc - - changed the default value for the binning of fHistPhi - - changed the start parameter for the gaussian fit for the - calculation of ArcWidth - - - - 2005/05/09 Thomas Bretz - - * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, - readraw.cc, showplot.cc, sinope.cc, sponde.cc, star.cc: - - changed order of initialization such that a real NULL - output is possible - - changed TApplication name from upper to lower case - - in some applications replaced manual setup of gLog with - gLog.Setup - - * showlog.cc: - - improved alorithm - - * showplot.cc: - - implemented Print options - - * mbase/MLog.[h,cc]: - - fixed a bug which caused output in NULL output - - added Getter IsNullOutput - - * mbase/MStatusDisplay.[h,cc]: - - implemented PDF and SVG printing - - moved "Save As Something" to new submenu - - fixed and improved printing - - implemented PrintDialog for printing - - implemented printing of log (untested) - - allow saving by extension (line Print() in root): SaveAs - - * mfileio/MWriteRootFile.h: - - replaced BIT(17) by BIT(23) to improve compatibility with - root 4.04/00 and upcomming versions - - * mhflux/Makefile, mjobs/MJCut.cc: - - replaced MTheta by MThetaSq to get rid of a problem - with the automatic naming of the binning (BinningTheta) - - * mhist/MHCamera.[h,cc]: - - fixed a workaround (it has been fixed in root 4.04/00) - - allow setting the palette through the Draw-option. This allows - storage of the palette - - removed fColor. The palette is now diretly set though gStyle in - Paint - - * mjobs/MJOptimize.cc: - - restore null output correctly after eventloop - - * mjobs/MJSpectrum.cc: - - renamed Hist and HistOff to HistE and HistEOff - - added binnings M3Long and Conc1 - - - - 2005/05/06 Thomas Bretz - - * mbase/MStatusDisplay.cc: - - fixed constructor to work with newer root versions - (gClient!=NULL) - - * mfileio/MWriteRootFile.h: - - added a comment about BITs used by root - - * mhflux/MHEffectiveOnTime.cc: - - use 1e-10 instead of 0 in TPad::Divide - - - - 2005/05/06 Daniela Dorner - - * datacenter/scripts/copyscript: - - added command to ensure the correct permissions of the files - on disk - - - - 2005/05/04 Markus Meyer - - * mjobs/MJStar.cc: - - added cut in ArcWidth (final cuts for muons) - - * star.rc: - - added cut in ArcWidth - - * mmuon/MHSingleMuon.h - - added a Getter for fHistWidth - - - - 2005/05/04 Thomas Bretz - - * mfileio/MWriteRootFile.cc: - - fixed a possible infinite loop when compiling the new - file name as suggested by Abelardo - - * mhflux/MHAlpha.cc: - - search for fName+"Off" instead of ClassName()+"Off" - - * mjobs/MJSpectrum.cc: - - scale the displayed zd-plots by their maximum as the - histograms are scaled before - - * mjobs/MJStar.cc: - - implemented writing of the muon parameters. This takes another - 5% of the time (in total 15-20% for muon analysis). It enlarges - the file size by roughly 15% (a test file was enlarged from - 5.1M to 5.9M) - - * mmuon/MMuonCalibPar.cc: - - set default of ArcPhi to an invalid value = -1 - - * mreport/MReportDrive.cc: - - fixed a typo in the comments - - - - 2005/05/03 Thomas Bretz - - * mjobs/MJCut.cc: - - added histogram 'OnTime' for MC - - * mpointing/MSrcPosCalc.cc: - - removed dependancy on MTime for MC - - * star.cc: - - addde possibility to switch off muon analysis - - * star.rc: - - added parameters for muon analysis - - * mbadpixels/MBadPixelsCam.cc: - - fixed a typo in a comment - - * mjobs/MJStar.[h,cc]: - - added possibility to switch off muon analysis - - * mjobs/Makefile: - - added -I../mmuon - - * mjobs/MJCut.cc, mjobs/MJSpectrum.cc: - - renamed MHAlpha to Hist (to have a common naming for all options) - - renamed MHAlphaOff to HistOff - - - - 2005/05/02 Thomas Bretz - - * ganymed.rc: - - updated to the latest changes - - * mhflux/MHAlpha.[h,cc]: - - made a base class with the necessary interface to derived classes - to support other variables like dca or theta - - * mjobs/MJCut.[h,cc]: - - added support for MHAlpha derived classes - - made MHTheta the default - - * mhflux/MHTheta.[h,cc]: - - added - - * mhflux/Makefile, mhflux/FluxLinkDef.h: - - added MHTheta - - - - 2005/04/29 Thomas Bretz - - * manalysis/MEventRateCalc.cc: - - fixed jumps when a new run is initiated - - set as time a time which represents the starting point - of the calculation interval in all cases - - * star.rc, mmuon/MMuonCalibParCalc.cc, mmuon/MMuonSetup.[h,cc]: - - fixed wrong units of thresholds for muon analysis - - * mmuon/MHSingleMuon.cc: - - removed obsolete conversion factor in error calculation - - FindeCreateObj called for MMuonSetup - - get NDF from fit - - optimized FindRangeAboveThreshold - - handle special case when arcphi is 360deg - - * star.cc: - - replaced ProcessFile by Process - - * mjobs/MJSpectrum.cc: - - renamed second MHAlpha tab to MHAlphaOn to be able to - access each tab uniquely - - fixed a bug calling SetStats which could cause crashes - - * mjobs/MJStar.[h,cc]: - - preliminary implementation of the muon analysis - - reanamed ProcessFile to Process - - - - 2005/04/28 Thomas Bretz - - * manalysis/MMultiDimDistCalc.[h,cc]: - - replaced MHadronness by MParameterD - - * mhflux/MHEnergyEst.cc: - - removed obsolete include of MEnergyEst - - * mmuon/MHMuonPar.cc: - - fixed a type in an axis label - - - - 2005/04/27 Thomas Bretz - - * Makefile: - - added mmuon - - remobed mstarcam - - * callisto.cc, ganymed.cc, star.cc: - - renamed ProcessFile to Process - - * star.rc: - - added some muon parameters - - * mastro/MAstroCamera.[h,cc]: - - temporarily removed interface to MStarPos - - * mbase/MStatusArray.h: - - added default constructor - - * mcalib/MCalibColorSet.cc: - - added runs 39942, 39944, 44834, 39941, 39943 and 44833 - (undocumented change from the BCN cvs) - - * mjobs/MJCalib.[h,cc], mjobs/MJCalibTest.[h,cc], - mjobs/MJCalibrateSignal.[h,cc], mjobs/MJCalibration.[h,cc], - mjobs/MJCut.[h,cc], mjobs/MJPedestal.[h,cc]: - - removed support for MRunIter (use the setter of MSequence - instead) -- this makes the code a lot easier to maintain - - removed support for autodetection if the output already exists -- - this makes the code a lot easier to maintain - - renamed ProcessFile to Process - which was missleading - - * mmuon/MHMuonPar.[h,cc]: - - changes to axis labels etc. - - * mmuon/MMuonCalibPar.[h,cc]: - - removed the histograms and all obsolete variables - - removed obsolete SetUseUnmap (this cannot happen - by definition of Unmap) - - * mmuon/MMuonCalibParCalc.[h,cc]: - - moved the code for calculation the parameters to new class - MHSingleMuon - - * mmuon/MMuonSearchPar.[h,cc]: - - replaced arbitrary fir by minuit (faster and more accurate) - - removed precalculation of muon center - makes fit worse - - * mmuon/MMuonSearchParCalc.[h,cc]: - - fixes to comments - - fixes to includes - - * mmuon/MMuonSetup.[h,cc]: - - binnings removed (replaces by MBinning) - - * mmuon/Makefile, mmuon/MuonLinkDef.h: - - added MHSingleMuon - - * msignal/MExtractTimeAndchargeSpline.cc: - - fixed a bug found by Abelardo which could cause different - results with different compiler optimiztaion options due - to rounding errors. - - - - 2005/04/25 Thomas Bretz - - * ganymed.cc: - - changed policy of writing the resulting events to the result file - - * sponde.cc: - - added commandline option to use all monte carlos - - added command line option to read the MCs more accurate - - * sponde.rc: - - added - - * mbase/MStatusDisplay.[h,cc]: - - added some code to get Tab by name - - fixed a typo in a status line output - - * mhbase/MH.[h,cc], mhbase/MH3.[h,cc], mhflux/MHFalseSource.h, - mhist/MHCamEvent.[h,cc], mhist/MHCamEventRot.h, - mhist/MHEvent.h, mhist/MHStarMap.h, mhist/MHTriggerLvl0.[h,cc], - mhistmc/MHMcTriggerLvl2.[h,cc], mhvstime/MHPixVsTime.[h,cc], - mhvstime/MHSectorVsTime.[h,cc], mimage/MHHillas.[h,cc], - mimage/MHHillasExt.[h,cc], mimage/MHHillasSrc.[h,cc], - mimage/MHImagePar.[h,cc], mimage/MHNewImagePar.[h,cc]: - - changed GetHistByName to be const-qualified to be compatible - with FindObject - - added some FindObject function to call GetHistByName - - * mhflux/MHAlpha.[h,cc]: - - changed such, that it can be forced to display the excess - events versus size - - * mjobs/MJCut.[h,cc]: - - display number of excess events versus Size per default - - removed energy estimator - - * mjobs/MJOptimize.cc: - - display number of excess events verss size after optimization - - * mjobs/MJSpectrum.[h,cc]: - - implemented setting up energy estimator - - replaced some gLog by fLog - - display comparison of image parameters - - - - 2005/04/22 Thomas Bretz - - * mbase/MStatusArray.[h,cc]: - - switch off adding histograms to gDirectory in newly - overwritten Read-function - - * mhflux/MHCollectionArea.[h,cc]: - - implemented member function GetHistSel - - don't display full statistics - - fixed a possible crash in Paint - - - - 2005/04/22 Markus Meyer - - * mmuon/MMuonSetup[.h.cc]: - - new container class for muon parameters - which are not changing from event to event - (setup parameters for the analysis). These - parameters were stored in MMuonCalibPar before - - * mmuon/MMuonCalibPar[.h.cc]: - - changed MCerPhotEvt and MCerphotPix to MSignalCam - and MSignalPix to read the new format - - removed the setup parameters (stored now in - MMuonSetup) - - removed all the sanity checks - - removed pre-cuts - - cuts in process, to save only muon-like events - - * mmuon/MMuonCalibParCalc[.h.cc]: - - changed MCerPhotEvt and MCerphotPix to MSignalCam - and MSignalPix to read the new format - - removed pre-cuts - - * mmuon/MMuonSearchPar[.h.cc]: - - changed MCerPhotEvt and MCerphotPix to MSignalCam - and MSignalPix to read the new format - - - - * mmuon/MMuonSearchParCalc[.h.cc]: - - changed MCerPhotEvt and MCerphotPix to MSignalCam - and MSignalPix to read the new format - - * mmuon/MHMuonPar[.h.cc]: - - new histgram class, plots different muon - parameters - - - - 2005/04/21 Daniela Dorner - - * datacenter/scripts/runcallisto: - - fixed choice of todofile - - * datacenter/scripts/copyscript: - - adapted some paths - - * datacenter/macros/filldotrun.C: - - added 6 new arehucas versions - - * datacenter/scripts/writesequencefile: - - added make path for sequencefiles - - - - 2005/04/21 Thomas Bretz - - * mhcalib/MHCalibrationRelTimeCam.cc: - - fixed usage of a uninitialized pointer - - * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc: - - fixed usage of MFTriggerPattern - - * mtrigger/MFTriggerPattern.[h,cc]: - - allow to set default from outside in case no pattern - could be decoded - - - - 2005/04/20 Thomas Bretz - - * callisto.cc: - - added a comment which shows how to correctly skip job2 if - extractor doesn't inherit from MExtractTimeAndCharge, but... - // This could skip job2 if extractor doesn't inherit from - // MExtractTimeand Charge... but this is not necessary. - // We only get the same pedestal twice (which we want to have - // anyhow. A switch when using the result of job2 later is also - // not necessary, because without running job2 it is identical - // with job1 - - * mjobs/MSequence.cc: - - use the sequence number'd directories in case of calibrated data - and image files instead of the date. - - * mhflux/MAlphaFitter.cc: - - copy also results in Copy() - - * mjobs/MJOptimize.cc: - - print result of optimization in case MAlphaFitter is used - - store results back in initial MAlphaFitter - - * mjobs/MJSpectrum.[h,cc]: - - implemented a faster simple mode weighting the read spectrum - with the theta-probability - - - - 2005/04/20 Daniel Mazin (2005/04/18) - - * mreport/MReportCamera.[h,cc] - - added necessary changes to include Active Load and Central Pixel - info from Camera reports - - * mcamera/MCameraActiveLoad.[h,cc] - - added to store Active Load info from the Camera reports - - * mcamera/MCameraCentralPix.[h,cc] - - added to store Central Pixel info from the Camera reports - - * mcamera/Makefile - * mcamera/CameraLinkDef.h - - added MCameraActiveLoad and MCameraCentralPix classes - - - - 2005/04/20 Markus Gaug (2005/04/15) - - * mcalib/MCalibrationChargeCam.[h,cc] - - added new function CopyHiLoConversionFactors - - - - 2005/04/20 Markus Gaug (2005/04/14) - - * mcalib/MCalibColorSteer.[h,cc] - - fixed a bug in the recognition of the calibration bit pattern. - Concerns only intensity calibration. - - * mcalib/MCalibrationRelTimeCalc.cc - - return kTRUE instaed of kFALSE in case that the Process() has - never been executed. - - * mjobs/MJCalibration.cc - - add a filter against PIN Diode events since some of the recent - calibration runs have been taken with Pin Diode. - - - - 2005/04/12 Markus Gaug - - * mcalib/MCalibrationCam.[h,cc] - - added a storage place for the run number - - * mcalib/MCalibCalcFromCalc.[h,cc] - - store the run number in the individual MCalibrationCams - - - - 2005/04/19 Thomas Bretz - - * mjobs/MJCut.cc: - - fixed a problem when not enabling "--res" - - * mimage/MHVsSize.[h,cc]: - - added more displayed variables - - * mjobs/MJSpectrum.[h,cc]: - - added - - * mjobs/Makefile, mjobs/JobsLinkDef.h: - - added MJSpectrum - - * Makefile: - - added sponde.cc - - * sponde.cc: - - added - - * mhbase/MBinning.h: - - added Print() to //*MENU* - - * mhflux/MAlphaFitter.cc: - - do not set inf-flag in Print() - - * mhflux/MHAlpha.[h,cc]: - - set all-flag for printing MAlphaFitter("result") - - added Getter for excess histogram - - * mjobs/MDataSet.[h,cc]: - - allow to initialize a TChain from this dataset - - * mjobs/MJCut.cc: - - moved energy estimator back before Cut0 otherwise the - EnergyEst container is missing in summary file - - * mhflux/MHCollectionArea.cc: - - draw efficiency into third pad - - - - 2005/04/18 Thomas Bretz - - * manalysis/MCompProbCalc.cc, mbadpixels/MBadPixelsCalc.cc, - mbadpixels/MBadPixelsTreat.cc: - - some fixes to documentation (THtml complained about missing - classes) - - * mbase/MStatusArray.[h,cc]: - - implemented some functions to print contents of StatusArray - and/or tab/canvas. - - * mhbase/MFillH.cc: - - remove fH from ListOfPrimitives before adding Clone in - PostProcess - - * mhbase/MH.[h,cc]: - - implemented new member function RemoveFromPad (necessary - if a class should support same-option) - - * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, - mimage/MHImagePar.cc, mimage/MHNewImagePar.cc, mimage/MHVsSize.cc: - - fixed naming in case of same-option in Draw - - remove previous histograms from pad in case of same-option - - * mjobs/MJCut.[h,cc]: - - write all binnings in WriteResult - - write MHillasExt to output - - BinningWidth, BinningLength and BinningDist added - - * mjobs/MJOptimize.[h,cc]: - - fixed a typo in output - - allow to exchange Test-/Train-Sample - - * ganymed.cc: - - implemented "-mc" option to allow cutting MC samples - - * showlog.cc: - - implemented real treatment of debug-levels - - return 1 instead of 0 in cae of normal finish - - * manalysis/MEnergyEstimate.h, mbase/MContinue.h, - mhflux/MAlphaFitter.h: - - added Print() to context //*MENU* - - * manalysis/MMatrixLoop.cc: - - fixed returning of number of entries if using split mode - - * mbase/MContinue.cc: - - implemented Print() function - - * mbase/MParContainer.[h,cc]: - - in Read set name of object to argument name if argument!=NULL - - reordered some checks for Method calls - - * mdata/MDataFormula.cc: - - fixed a problem with the replacement if using [?] for - fits - - * mfbase/MFEventSelector2.cc: - - replaced some +=1 and -=1 by ++ and -- - - * mfileio/MReadMarsFile.cc: - - fixed a bug which caused Preprocess to crahs if instatiated - with default constructor - - * mhbase/MH.cc, mhflux/MHEffectiveOnTime.cc: - - use dynamic_cast if getting "stats" - - * mhflux/MAlphaFitter.cc: - - small updates to output - - * mhflux/MHEnergyEst.cc: - - fixed all axis lables - - implemented fit of resolution - - initialize fBias=0 in SetupFill - - enhances Print() output - - * mjobs/MJCalibrateSignal.cc: - - moved all tasks for interleaved calibration events to - a third tasklist - - * mjobs/MJCut.[h,cc]: - - implemented correct treatment of MC files - - write resulting events to result file if no filename set - - moved energy estimator behind cuts - - * mjobs/MJOptimize.cc: - - changed RunEnergy such, that it can correctly treat - MC files written by ganymed using wobble-mode - - * mbase/MStatusDisplay.cc: - - fixed a possible crash in GetFullPad - - * mhbase/MBinning.[h,cc]: - - implemented Copy Constructor - - * mhflux/MHCollectionArea.h: - - call CalcEfficiency in Finalize - - * mhflux/MHEnergyEst.[h,cc]: - - implemented GetWeights - - * mimage/MHHillas.cc, mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, - mimage/MHImagePar.cc, mimage/MHNewImagePar.cc, mimage/MHVsSize.cc: - - remove histograms from global directory if name was changed - in Draw - - * mimage/MHVsSize.cc: - - exhanged the arguments of TMath::Sign - - - - 2005/04/14 Thomas Bretz - - * Release 0.9.1 - - - - 2005/04/14 Thomas Bretz - - * mjobs/MJCut.cc: - - added MPointingPos to output - - - - 2005/04/13 Thomas Bretz - - * mbase/MStatusDisplay.[h,cc]: - - implemented new Image types which can be written - - * mhbase/MBinning.[h,cc]: - - added some more constructors which can set the binning directly - - * mhflux/MHEnergyEst.h: - - added getter for fHEnergy - - * mhflux/FluxLinkDef.h, mhflux/Makefile: - - added MHCollectionArea - - * mhflux/MHCollectionArea.[h,cc]: - - added - - - - 2005/04/13 Daniela Dorner - - * datacenter/macros/fillcalib.C: - - added update - - * datacenter/scripts/copyscript - - fixed bug / changed path - - * datacenter/macros/setupdb.C - - added table - - - - 2005/04/12 Daniela Dorner - - * datacenter/macros, datacenter/scripts: - - added - - * datacenter/macros/buildsequenceentries.C, - datacenter/macros/checkfileavail.C, - datacenter/macros/doexclusions.C, - datacenter/macros/fillcalib.C, - datacenter/macros/filldotrbk.C, - datacenter/macros/filldotrun.C, - datacenter/macros/fillsignal.C, - datacenter/macros/findcacofiles.C, - datacenter/macros/getdolist.C, - datacenter/macros/insertcacofile.C, - datacenter/macros/insertdate.C, - datacenter/macros/resetallruns.C, - datacenter/macros/setstatus.C, - datacenter/macros/setupdb.C, - datacenter/macros/writesequencefile.C, - datacenter/scripts/buildsequenceentries - - added macros to do the automatic procedures in the datacenter - - * datacenter/scripts/checkfilesforsequenceavail, - datacenter/scripts/copyscript, - datacenter/scripts/correcttime, - datacenter/scripts/doexclusions, - datacenter/scripts/filesondisk, - datacenter/scripts/fillcallisto, - datacenter/scripts/runcallisto, - datacenter/scripts/runstar, - datacenter/scripts/writesequencefiles - - added scripts to do the automatic procedures in the datacenter - - * automatic-exclusions.rc, steps.rc - - added rc files for the automatic procedures - - - - 2005/04/12 Thomas Bretz - - * Makefile: - - for the moment remove mhistmc from compilation - - * ganymed.cc: - - return 2 when detecting wrong commandline argument - - * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - - removed MEnergyEst (replaced by a simple MParameterD) - - * manalysis/MEnergyEstimate.[h,cc]: - - replaced MEnergyEst by MParameterD - - implemented Print() function - - updated ClassVersion from 0 to 1 to allow storage of - energy estimator - - * mbase/MStatusArray.[h,cc]: - - overloaded DisplayIn to allow displaying a single tab - - added some output if ObjectInCanvas not found - - * mbase/MStatusDisplay.[h,cc]: - - enhanced Read() and Display() with the possibility to only - read or display a single tab - - * mcalib/MCalibrateData.cc: - - enhancements to logging output - - * mcalib/MCalibrationRelTimeCalc.cc: - - some fixes to format of logging output - - * mfbase/MF.[h,cc]: - - changed kAllowEmpty from a bit to the new datamember fAllowEmpty. - This was necessary to allow storage of MF into files - - changed ClassVersion from 0 to 1 - - * mhbase/MBinning.cc: - - fixed SetEdgesRaw (lin, log, etc was ignored) - - * mhflux/MHAlpha.[h,cc]: - - replaced MEnergyEst by MParameterD - - renamed Theta to ExcessTheta - - renamed Energy to ExcessEnergy - - renamed Size to ExcessSize - - renamed Time to ExcessTime - - * mhflux/MHEnergyEst.[h,cc]: - - replaced MEnergyEst by MParameterD - - implemented Print() function - - some fixes to displaying the histograms. This makes sure, - that no crashes happen, but unluckily it works correctly only - with root 4.02/00 - - * mjobs/MJOptimize.[h,cc]: - - implemented a AddPreCut taking a MFilter as argument - - SetBit(kCanDelete) for all internal PreCuts - - Print the result of the energy estimation after it was done - - * mranforest/MRFEnergyEst.[h,cc]: - - replaced MEnergyEst by MParameterD - - * mfileio/MReadTree.cc: - - shortened the output a bit when siwtching to the next file - - - - 2005/04/11 Thomas Bretz - - * manalysis/MMatrixLoop.[h,cc]: - - implement option to divide matrix into two samples - - * mhflux/MHEnergyEst.cc: - - changed to display projection of enegry resolution - - fixed to use correct minimization value - - * mjobs/MJOptimize.[h,cc]: - - implemented option to divide sample into test/train - - * mcalib/MCalibCalcFromPast.cc, mcalib/MCalibColorSteer.cc, - mcalib/MCalibrationChargeCalc.cc, mhcalib/MHCalibrationCam.cc: - - small updates to log-output - - * mhflux/MAlphaFitter.cc: - - output scale-factor - - * mhist/MHCamera.cc: - - as a workaround for a severe problem in gStyle->SetPalette - when using the deep blue sea I have switched off this - Platte for the moment - - - - 2005/04/08 Markus Gaug (2005/04/07) - - * mhcalib/MHCalibrationChargeCam.cc: - - UNDOCUMENTED CHANGE: Do not call histlo.CreateFourierSpectrum() - if IsOscillations() - - * mjobs/MJCalibrateSignal.cc: - - UNDOCUMENTED CHANGE: Set SetOscillations(kFALSE) for - hchacam, hbndcam, hrelcam - - * mhcalib/MHCalibrationRelTimeCam.cc: - - fill array only if IsOscillations() is true. This is the case in - all classes deriving from MHCalibrationCam, except for this one! - The effect was that the interlaced calib. events occupied more - and more memory becoming slower and slower because the option: - SetOscillations(kFALSE) was not treated correctly. - - * mjobs/pedestalref_Dec04.rc - - update the reference lines in the display according to the spline - extractor. - - * mjobs/MJCalibration.cc - - clarify a mis-leading histogram title - - * callisto_Dec04Jan05.rc: - - UNDOCUMENTED CHANGE: use the pedestref_Dec04.rc as reference - file. - - - - 2005/04/08 Thomas Bretz - - * mhbase/MH3.cc: - - replaced all Float-histograms by double histograms. This - is backward compatible with I/O and has the advantage, that - we are compatible with most other double histograms used in - Mars - - * mhflux/MHEnergyEst.cc: - - made the energy binning the same than in all other classes - - * mreport/MReportStarguider.[h,cc]: - - implemented new values from new starguider report as defined - in TDAS00-07 V7.1 - - Fixed the formerly wrong unit of fDevAz and fDevZd (unit now - is arcmin) - - * mjobs/MJCalibrateSignal.cc: - - first replaced contmc by a new filter Markus G. used, but - after a discussion with Abelardo it turned out, that the - original filter does a better job, becuase it takes both - (level 1 trigger and minimum number of phes) conditions - used in the MC into account. - - * mjobs/MJCut.cc: - - added a plot: Effective-On-Time versus Theta used to produce - a spectrum - - * mjobs/MJCalibrateSignal.cc: - - removed condition IsUseBlindPixel() and IsUsePINDiode from - setting filter and applied it to the corresponding task - - * mjobs/MDataSet.cc: - - fixed a bug using the default paths - - - - 2005/04/07 Thomas Bretz - - * mpointing/MSrcPosCalc.cc: - - also skip Process if fSourcePos==NULL, this happens in real - data, too, if no pointing correction is done. - - * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - - removed MParameterI, MParameterD, MParameterDerr - - * mbase/BaseLinkDef.h, mbase/Makefile: - - added MParameterI, MParameterD, MParameterDerr - - * mbase/MParList.cc: - - if a container is rejected due to wrong inheritance its - inheritance is mentioned in the error message - - * mhbase/HBaseLinkDef.h, mhbase/Makefile: - - removed MWeight - - * mhbase/MWeight.[h,cc]: - - removed, replaced by MParameterD - - * mhbase/MFillH.[h,cc], mmontecarlo/MMcWeightEnergySpecCalc.[h,cc]: - - replaced MWeight by MParameterD - - * mjobs/MJStar.cc: - - fixed the wrong axis title in the histogram showing the rate - - * manalysis/MParameters.[h,cc]: - - moved to mbase - - * mbase/MParameters.[h,cc]: - - inherit MParameterDerr from MParameterD - - changed class version of MParameterDerr from 1 to 2 - - * mfbase/MFEventSelector2.cc: - - fixed that in SelectProb the wrong bin was chosen - - - - 2005/04/07 Markus Gaug (2005/04/06) - - * mjobs/calibrationref_Dec04.rc - * callisto_Dec04Jan05.rc - - update the reference lines in the display according to the spline - extractor. - - * msignal/MExtractTimeAndChargeSpline.cc - - move fgHiGainFirst from 2 to 0. This is important for the Dec. und - January data where the calib. pulse position changes much. - - * mjobs/MJCalib.cc - * mjobs/MJCalibration.cc - - move fDevice and functions IsUseBlindPixel() and - IsUsePINDiode() into the base class. - - * mjobs/MJCalibrateSignal.cc - - do not apply the modified extraction window to the interlaced - calibration events. This is a bugfix especially for the - December and January data. - - extract and fit blind pixel and pin diode only if flag - IsUseBlindPixel() or IsUsePINDiode() is set. - - - - 2005/04/07 Markus Gaug (2005/04/03) - - * mcalib/MCalibrateData.cc - - made one warning more understandable. - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - moved fgOffsetFromLogain from -1.8 to -2.8. This corrects only an - defective extraction of the MC at low-gain signals lower than 90 - phes. - - - - 2005/04/07 Markus Gaug (2005/04/01) - - * mpedestal/MExtractPedestal.[h,cc] - - use the standard way to define the default for fNumEventsDump - - added missing "NumDump" in ReadEnv - - * callisto_*.rc - - correct the default of the number of events used in - pedestal calculation (NumEventsDump). - - added missing lines for setting of parameters for the - MJCalibrateSignal.PedCalcFromExtractRndm.* - (CORRECTED SOME BUGS IN THIS LINES) - - Replaced NumEventsDump by NumDump - - - - 2005/04/05 Thomas Bretz - - * mjobs/MSequence.cc: - - fixed a bug in SetupDatRuns. P was setup instead of D - - * star.cc, mjobs/MJStar.cc: - - fixed wrong setup of data-files - - * mjobs/pedestalref_Feb05.rc, mjobs/hilocalib_sp1.root, - mjobs/hilocalib_sp1_mc.root: - - added - - * mimage/MHillasCalc.[h,cc]: - - implemented missing ReadEnv - DON'T KNOW WHERE IT WAS! argh... - - * mmc/MMcCorsikaRunHeader.h: - - added Getter for fWobbleMode - - * mpointing/MSrcPosCalc.[h,cc]: - - added detection of MC files and setting of source position - according to wobble mode flag in MMcCorsikaRunHeader - - fixed a bug in ReadEnv (wrong return statement) found - by Abelardo. Correct handling of floating point numbers - in the source position (12.5) was affected. - - - - 2005/04/04 Thomas Bretz - - * callisto.cc, sinope.cc, mjobs/MDataSet.[h,cc], mjobs/MJCalibTest.cc, - mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, - mjobs/MSequence.[h,cc] - - changed setup procedure for paths to allow using standard - paths everywhere - - fixed to use new correct datacenter standard paths - - made sure, that the sequences in a dataset are sorted by - their number to ensure the correct synchronization - - * mhflux/MHAlpha.cc: - - display correct error (excess/significance) - - * mjobs/MJCalibrateSignal.cc, mjobs/MJPedestal.cc: - - removed MPointingPosCalc from Tasklist - - * mjobs/MJStar.cc: - - added MPointingPosCalc to tasklist for "Events" in case of MC - - * ganymed.cc, mjobs/MJCut.[h,cc]: - - implemented an option to enhance the display - - do not display FS plot in wobble mode - - made sure files are not written when they should not be written - - * mhflux/MHAlpha.[h,cc]: - - let FitEnergyBins return the mean of the significance of - all Energy Bins - - * mimage/MHHillasExt.cc, mimage/MHHillasSrc.cc, - mimage/MHImagePar.cc, mimage/MHNewImagePar.cc: - - implemented or fixed implementation of "same" Draw-option - - slightly modified binning for Dist in MHHillasSrc - - * mjobs/MJCalibrateSignal.cc: - - do not plot pulse time twice - - * mjobs/MJOptimize.cc: - - print all parameters in minuit after they have been - setup - - - - 2005/04/01 Thomas Bretz - - * mbadpixels/MBadPixelsCalc.cc: - - switched on bad pixel detection for a pedestal level - which is more than 5 times the variance - - * mfbase/MF.cc: - - when fixing the "Inverted" bit in ReadEnv don't print a - message on the screen - - * mhflux/MHAlpha.cc: - - plot correct errors - - do not plot the point if its significance is not greater 1 - - - - 2005/03/29 Markus Gaug - - * mcalib/MCalibColorSet.cc: - - added runs 34814, 34815, 45493, 45502, 45525, 45537 and 45548 - - - - 2005/03/29 Thomas Bretz - - * ganymed.cc: - - implemented cmdline option for wobble and no-wobble to overwrite - dataset - - added cmdline option to print dataset - - * mbase/MEvtLoop.[h,cc]: - - added some memory leak analysis to eventloop - - * mbase/MStatusDisplay.[h,cc]: - - added third part to status bar which displays the current - memory usage - - added some more sizes to menu bar - - replaced SetStatusLine1/2 by calling a common SetStatusLine - - added a delete to CloseWindow() to be able to close a - static window. REMARK: This gives a hell of warnings in - valgrind but it is currently the only option to get this working - which is really annoying - - * mhbase/MH.cc: - - small simplification - - * mhbase/MHMatrix.cc: - - replaced IsValid() by a check for the number of Rows, this - was necessary because in root 4.02/00 all matrices seems - to be valid - - * mhflux/MHAlpha.cc: - - changed the number of default bins in energy - - make sure that the Alpha plot for off-data is displayed with - a minimum at 0 - - fixed TPad::Divide for root 4.02/00 - - * mhflux/MHEnergyEst.cc: - - use the mean abs of the resolution as fit value - - some fixed to graphics - - fixed the TPad::Divide for root 4.02/00 - - for the moment removed the pad added to the list of cleanups - to get rid of the crashes - - * mhflux/MHFalseSource.cc: - - fixed for root 4.02/00 which seaqrches in the current pad - for the histogram when calling Project3D - - fixed the TPad::Divide for root 4.02/00 - - * mhist/MHHadronness.[h,cc]: - - use MParameterD instead of MHadronness - - * mimage/ImageLinkDef.h, mimage/Makefile: - - added MHVsSize - - * mimage/MHHillas.cc: - - implemented 'same' for Center-histogram - - * mhflux/FluxLinkDef.h, mhflux/Makefile: - - added MHEnergyEst - - * mhflux/MAlphaFitter.[h,cc]: - - added significancetimes log10(excess) as fit option - - * mjobs/MDataSet.[h,cc]: - - added wobble-mode option - - * mjobs/MJCut.cc: - - changed default binning for energy - - added MHillasSrcAnti optionally to the output - - added MHVsSize to the tabs which are shown - - * mjobs/MJOptimize.[h,cc]: - - added dummy parameters to FixParameter for compatibility - with SetParemeter - - replaced MFSupercuts by MFMagicCuts - - use Energy in MHAlpha instead of size - - * mbase/MFilter.[h,cc]: - - implemented ReadEnv to treat "Inverted" - - * mfbase/MF.[h,cc], mfilter/MFSupercuts.cc: - - treat "inverted" with MFilter::ReadEnv - - * manalysis/MCompProbCalc.[h,cc], mranforest/MRanForestCalc.[h,cc]: - - replaced MHadronness by MParameterD - - * mdata/MDataFormula.[h,cc]: - - removed comments from SetVariables - - replaced GetExpFormula by GetTitle - - * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - - MHadronness removed - - * mfilter/MFMagicCuts.[h,cc]: - - added - - * mfilter/FilterLinkDef.h, mfilter/Makefile: - - added MFMagicCuts - - * mjobs/Makefile, mjobs/JobsLinkDef.h: - - removed MJExtractSignal - - * mfbase/MF.cc: - - fixed a problem with double-inversion in ReadEnv - - * mpointing/MSrcPosCalc.cc: - - removed an output line which showed only an empty container - - - - 2005/03/24 Thomas Bretz - - * callisto.cc, ganymed.cc, mars.cc, merpp.cc, readdaq.cc, - readraw.cc, showlog.cc, showplot.cc, sinope.cc, star.cc: - - replaced all returns of -1 by return 2 - - * manalysis/AnalysisLinkDef.h, manalysis/Makefile: - - added MEnergyEst (container) - - * mhflux/MAlphaFitter.[h,cc]: - - implemented new fit result options - - - - 2005/03/23 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - fix a bug in the time fine adjustment - - * mjobs/hilocalib_*_mc.root - - high-gain low-gain intercalibration constants for the MC. - - * mjobs/MJCalibration.cc - - use the MC- intercalibration files for MC. - - - - 2005/03/23 Thomas Bretz - - * mhcalib/MHCalibrationChargeCam.cc: - - fixed a possible crash in DrawDataCheckPixel() if - pix.GetGraphEvents() returns NULL - - - - 2005/03/23 Thomas Bretz - - * Release 0.9 - - - - 2005/03/23 Thomas Bretz - - * ganymed.cc: - - implemented wobble-mode option - - * mhflux/MAlphaFitter.[h,cc]: - - fixed a problem in wobble mode (number of on- minus number - of off-entries where calculated as 0) - - added some additional resource options for scaling - - added some missing const-qualifiers - - * mhflux/MHAlpha.cc: - - some cosmetic change to output - - * mjobs/MDataSet.[h,cc]: - - added the possibility to add a source name for wobble mode - (preliminary) - - added reading from *.edb catalog - - * mjobs/MJCalibTest.cc, mjobs/MJCalibrateSignal.cc, - mjobs/MJCalibration.cc, mjobs/MJPedestal.cc: - - replaced iter.Print("all") by iter.Print() - - * mjobs/MJCut.[h,cc]: - - implemented wobble mode - - implemented getting source position - - * mjobs/MJStar.cc: - - switched off calculation of MConcentration - - implemented the new debug option for files (was still missing - in MJStar) - - * mpointing/MSrcPosCalc.[h,cc]: - - always writa the anti-source position into the parameter list, too - - implemented wobble mode (exchange source and anti-source position) - - * mjobs/Makefile, mjobs/JobsLinkDef.h: - - added MJOptimize - - * mfilter/MFSupercuts.[h,cc]: - - added - - * mfilter/Makefile, mfilter/FilterLinkDef.h: - - added MFSupercuts - - removed MFAlpha - - * manalysis/Makefile, manalysis/AnalysisLinkDef.h: - - removed MEnergyEst - - removed MEnergyEstParam - - removed MEnergyEstParamDanielMkn421 - - removed MSupercuts - - removed MSupercutsCalc - - removed MFindSupercuts - - removed MMinuitInterface - - removed MFiltercutsCalc - - * mhist/Makefile, mhist/HistLinkDef.h: - - removed MHEnergyTime - - removed MHEnergyTheta - - removed MHAlphaEnergyTime - - removed MHAlphaEnergyTheta - - removed MHThetabarTime - - removed MHThetabarTheta - - removed MHGamma - - removed MHSigmaPixel - - removed MHSigmabarTheta - - removed MHOnSubtraction - - removed MHFindSignificance - - removed MHCT1Supercuts - - * mhflux/Makefile, mhflux/HistLinkDef.h: - - added MHEnergyEst - - - - 2005/03/22 Thomas Bretz - - * mjobs/MJCalibTest.cc, mjobs/MJCalibrateSignal.cc, - mjobs/MJCalibration.cc, mjobs/MJPedestal.cc: - - added a possibility to print the files which are - searched/found if the files doesn't match the sequence - - * mjobs/MJPedestal.cc: - - undocumented(!) change, changed fgExtractWinLeft - from 3.5 to 2.5 - - * mimage/MHillas.cc: - - fixed a bug which took unused pixels into account - introduced errornously with the last change to MSignalCam - - - - 2005/03/21 Thomas Bretz - - * mfbase/MFDataChain.cc: - - fixed a bug in GetDataMember if fData is not valid - - * mhbase/MH3.cc: - - moved drawing histograms back to Draw. This fixes a - problem with root 4.02/00. Reading/Writing should be - no problem if the names of the profiles are well known. - - with this fix 'same' is currently NOT supported - - * mimage/ImageLinkDef.h, mimage/Makefile: - - added MNewImagepar2 - - added MHCewImagePar2 - - * mimage/MNewImagePar2.[h,cc], mimage/MHNewImagePar2.[h,cc]: - - added new classes calculating and displaying the length - of the border line of a shower - - * mimage/MHImagePar.cc: - - fixed a problem with root 4.02/00 when setting the margin - in Divide to 0 by setting it to 1e-10 - - * mimage/MHNewImagePar.[h,cc]: - - fixed to display Areas in deg^2 - - * mimage/MHillas.cc, mimage/MHillasExt.cc, mimage/MHillasSrc.cc, - mimage/MImagePar.cc, mimage/MNewImagePar.cc - - a small fix to Print() - - * mimage/MHillasCalc.[h,cc]: - - added MNewImagePar2 to supported image parameters - - * mjobs/MJStar.cc: - - replaced MCerPhotEvt by MSignalCam - - * msignal/cosmics_weights46.dat, msignal/calibration_weightsUV46.dat, - mjobs/hilocalib_df46.root: - - added new intercalibration file for digital filter 4sl higain - and 6sl logian - - * mbase/MLogHtml.cc: - - fixed a bug in Underline which cause a crash if fOut==NULL - - output a message if file cannot be opened - - * mhcalib/MHCalibrationPulseTimeCam.cc: - - for some output there was a replacement of pix.GetPixId() - by hist.GetName() - - * mimage/MHillas.[h,cc]: - - added new member function GetBorderLine returning the border - line correspondig to an ellipse with axis lnegth and width - - added new member function GetArea returning the area - correspondig to an ellipse with axis lnegth and width - - - - 2005/03/19 Markus Gaug - - * mjobs/hilocalib_df46.root - - added new intercalibration file for digital filter 4sl higain - and 6 slices logain - - * mjobs/MJCalibration.cc - - exchanged intercalibration file from hilocalib_df_4.root to - hilocalib_df46.root - - do not apply hi-gain lo-gain intercalibration for MC files. - - * mjobs/MJPedestal.cc - - exchanged two (Int_t)'s by TMath::Nint(). - - undocumented(!) change to the calculation of the extraction - range (PulsePosCheck) - - * callisto.rc - - exchanged default weights file for Digital filter from - cosmics_weights4.dat to cosmics_weights46.dat and from - calibration_weights_UV4.dat to calibration_weights_UV46.dat! - This change is absolutely necessary, given the new results from - Nuria about the signal resolution in the low gain which gets worse - than the intrinsic Poisson jitter above 350 phes. Also the time - resolution is too bad. This was not known before we had the - correct low-gain MC pulse. - - - - 2005/03/18 Thomas Bretz - - * Makefile: - - removed mone from list of compiled programs - - * mars.cc: - - replaced the MARS display by the Camera Display directly - - * manalysis/MCameraData.[h,cc], mcalib/MCalibrateData.[h,cc], - mbadpixels/MBadPixelsTreat.[h,cc], mcalib/MCalibrateRelTimes.[h,cc], - mimage/MCameraSmooth.[h,cc], mimage/MConcentration.[h,cc], - mimage/MHillas.[h,cc], mimage/MHillasExt.[h,cc], - mimage/MImgCleanStd.[h,cc], mimage/MNewImagePar.[h,cc], - mimage/MImagePar.[h,cc], MNewImagePar.[h,cc], - mjobs/MJCalibTest.cc, mhcalib/MHCalibrationTestCam.[h,cc], - mpedestal/MPedPhotCalc.[h,cc], mjobs/MJCalibrateSignal.cc: - - removed dependancy on MArrivalTime, information now - found in MSignalCam - - replaced MCerPhotEvt by MSignalCam - - it was renamed because it will be completely incompatible - anyhow - - * mjobs/MJCalibrateSignal.cc: - - use new MSignalCam type to display pulse position of cosmics - - * mcalib/MCalibrateData.cc: - - calculate number of saturated pixels - - * manalysis/MCerPhotEvt.[h,cc]: - - removed possibility for zero-supression. Now the index - is identical with the position in the array - - renamed and moved to msignal/MSignalCam.[h,cc] - - * manalysis/MCerPhotPix.cc: - - removed obsolete values - - added arrival time - - renamed and moved to msignal/MSignalPix.[h,cc] - - * mcalib/MCalibrationChargeCalc.cc: - - some cosmetic changes and small fixed from the Munich cvs - (undocumented) - - * mfileio/MWriteRootFile.cc: - - fixed bug in RecursiveRemove which caused crashed with real - data - - * mhft/MGeomCamMagicEnhance.cc, mhft/MHexagonalFTCalc.cc: - - updated, but untested - - * mhist/MHCamEvent.[h,cc]: - - some fixes in Draw to get a correct display in root 4.02/00 - (at least on 64-bit systems) - - removed kSqrtVariance it is included in kProfile now - - * mhist/MHCamera.[h,cc]: - - removed sqrtvariance option which is included in profile now - - the profile now uses the new array fBinEntries to display - a more accurate profile - - * mhist/MHEvent.cc: - - set to type 6 for arrival times - - * mimage/MHillasCalc.cc: - - updated text for error=1 - - * mimage/MImagePar.cc: - - copy number of saturated pixels from MSignalCam - - * mjobs/MJStar.cc: - - enhanced title of some histogram - - * mjobs/MSequence.cc: - - updated path to fit data center (D.Dorner) - - * mmain/MEventDisplay.cc: - - display Arrival Time from MSignalCam now - - * msignal/MArrivalTimeCam.cc: - - implemented a new case 6 which is identical with the - default case AND arrival time from MSignalCam - - * manalysis/Makefile, manalysis/AnalysisLinkDef.h, - manalysis/: - - removed MCerPhotEvt - - removed MCerPHotPix - - removed MCerPhotAnal - - removed MCerPhotAnal2 - - removed MCerPhotCalc - - * mimage/Makefile, manalysis/ImageLinkDef.h: - - removed MHillasSrcCalc - - * manalysis/MSupercutsCalc.cc: - - removed an obsolete include - - * mhist/Makefile, mhist/HistLinkDef.h: - - removed MHSigmaTheta - - * mmain/Makefile, mmain/HistLinkDef.h: - - removed MDataCheck - - removed Mars - - removed MAnalysis - - removed MMonteCarlo - - removed MGDisplayAdc - - removed MOnlineDisplay - - removed MOnlineDump - - * msignal/Makefile, msignal/HistLinkDef.h, msignal/: - - added MSignalCam - - added MSignalPix - - added MSignalCalc - - * msql/Makefile, msql/SqlLinkDef.h: - - removed MSqlInsertRun - - * mfilter/Makefile, mfilter/FilterLinkDef.h: - - removed MFSelBasic - - removed MFSelStandard - - removed MFSelFinal - - - - 2005/03/17 Thomas Bretz - - * callisto.cc: - - added new option moon - - use light condition from MSequence to determin light condition - automatically - - * mjobs/MJPedestal.h: - - allow setting SetUseHists also to kFALSE - - * mjobs/MSequence.[h,cc]: - - added fLightCondition - - * mcalib/MCalibrateData.cc: - - undocumented change from Markus Gaug - - * mfilter/MFCT1SelBasic.[h,cc], mfilter/MFCT1SelStandard.[h,cc], - mfilter/MFCT1SelFinal.[h,cc]: - - moved to manalysisct1 - - * mfilter/Makefile, mfilter/FilterLinkDef.h: - - removed MFCT1SelBasic - - removed MFCT1SelStandard - - removed MFCT1SelFinal - - * manalysis/Makefile, manalysis/AnalysisLinkDef.h: - - removed MPad - - removed MMakePadHistograms - - removed MSigmabar - - removed MSigmabarParam - - removed MSigmabarCalc - - * mimage/Makefile, mimage/ImageLinkDef.h: - - removed MImgCleanTGB - - * mmontecarlo/Makefile, mmontecarlo/MonteCarloLinkDef.h - - removed MMcEnergyEst - - removed MMcTimeGenerate - - * msignal/Makefile, msignal/SignalLinkDef.h: - - removed MArrivalTime - - removed MArrivalTimeCalc - - removed MArrivalTimeCalc2 - - * mjobs/MJCalibration.cc: - - followed some undocumented changes from the other cvs - - - - 2005/03/16 Thomas Bretz - - * callisto.cc: - - set changed extractor in MJCalibrateSignal from MJPedestal - - don't process 'range finding' for MonteCarlo data - - * callisto.rc: - - removed obsolete Modified* option - - * mjobs/MJCalibrateSignal.[h,cc]: - - removed obsolete flag for ModifiedExtractWin - - allow also NULL for SetExtractor - - rearanged the too MWriteRootFile instantiations otherwise - callisto crashes in MWriteRootFile::ChangeFile - - removed some obsolete comments about an old MC workaround - - * mdata/MDataChain.cc: - - fixe to allow sign after e (eg. 1e-3, 1e+5 instead of 1e3, 1e5) - - * mcalib/MCalibColorSet.cc, mcalib/MCalibrationChargeCalc.cc, - mhcalib/MHCalibrationCam.cc: - - undocummented change - - - - 2005/03/16 Markus Gaug - - * msignal/MExtractTimeAndChargeSlidingWindow.cc - - fixed a bug in the reading of the resource file (reading of the - MExtractTimeAndCharge resources was skipped). - - * mcalib/MCalibrateData.cc - - for the case that the high-gain saturates, but the low-gain signal - could not be extracted successfully, take the high-gain signal, - multiplied by 1.5 (before, 0 was taken erroneously). - - * msignal/MExtractTimeAndCharge.cc - - catch one potential case for memory leaks in the low-gain - calculation. Extract low-gain only if the remaining extraction - window is not smaller than the number of slices needed by the - signal extractor. - - set the default fgLoGainStartShift to -3.5 - - * msignal/MExtractTimeAndChargeSpline.[h,cc] - * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - - adjust fLoGainStartShift by one slice, after findings from MC. - - - - 2005/03/15 Markus Gaug - - * msignal/MExtractTimeAndChargeSpline.h - - take fRandomIter out of the streamer. - - take fRiseTimeLoGain and fFallTimeLoGain into the streamer. - - raise version number to 4 - - * mjobs/MJCalibration.cc - - set default to kFALSE for PIN Diode or Blind Pixel calibration - (was kTRUE by error). - - - - 2005/03/15 Thomas Bretz - - * mjobs/MJCalibrateSignal.[h,cc]: - - added the fExtractor data member - - added a destructor deleting it - - only read extractor from file if not set by user - - user fExtractor as extractor1 - - do not delete extractor1 if set by user - - added member function to set extractor - - * mjobs/MJPedestal.cc: - - removed MFEventSelector workaround again - - do not write pedy file anymore - - * callisto.cc: - - MJCalibrateSignal now takes the signal extractor directly - instead of taking the long way round a new file - - * mpedestal/MExtractPedestal.cc: - - ReInit extractor correctly. Now the workaround should be - really obsolete - - * mbase/MGMenu.[h,cc]: - - make fix fix also compile root 3.10.02 - - - - 2005/03/14 Thomas Bretz - - * mbase/MGMenu.h: - - added a fix for root 4.02.00 - - - - 2005/03/14 Markus Gaug - - * mcalib/MCalibrateData.cc - - catch the case that now high-gain low-gian intercalibration const. - is available. - - * mjobs/MJPedestal.cc - - modify option for pedy*.root: from UPDATE to RECREATE - - - - 2005/03/11 Markus Gaug - - * callisto.rc - - changed default weights for DF to cosmics_weights4.dat. (This has - turned out to be the most stable set of weights). - - * mjobs/MJCalibration.cc - - some cosmetic changes in the output - - in case of WriteHists(), do not overwrite existing signal*.root - file, but append histograms (bugfix!) - - - - 2005/03/10 Toni Coarasa (With Nadia's and Alessandro's inside) - - * mjobs/MJCut.cc - - inclusion of (TString) to avoid compiler error under 2.95.3 - - * sinope.cc - - inclusion of to avoid compiler error under 2.95.3 - - - - 2005/03/10 Markus Gaug - - * msignal/MExtractTimeAndCharge.cc - - set fgLoGainStartShift to -4.0 - - put a check to avoid a dynamic low-gain range < 0 (should not - occur with current extractors, but one never knows...) - - * msignal/MExtractor.[h,cc] - - introduced Clear()-function, used in SetRange() - - * mjobs/MJCalibrateSignal.cc - - changed order of initialization of the 2 MWriteRootFiles whereupon - the crash goes away. Have to revise the /dev/null work-around - in MWriteRootFile! - - - - 2005/03/09 Markus Gaug - - * msignal/MExtractTimeAndCharge.cc - - catch a (very unprobable) case in which the low-gain range could - be negative - - * mjobs/MJCalibrateSignal.cc - - modify writing of MCalibrationPulseTimeCam to disk in order to - avoid program crash in the destructor of MJCalibrateSignal - - * mhcalib/MHGausEvents.h - - take fGraphEvents, fGraphPowerSpectrum, fHPowerProbability and - fPowerSpectrum out of the streamer. - - intialize fFlags to 0 - - - - 2005/03/09 Thomas Hengstebeck - - * mranforest/MRFEnergyEst.cc - - changed call of min, max functions to TMath::Min() and - TMath::Max() to avoid compilation problems with some gcc - versions - - changed check of energy rule (last col of MHMatrix) so, that - any rule containing "fEnergy" is accepted. - - - - 2005/03/08 Markus Gaug - - * mhcalib/MHPedestalCam.[h,cc] - - introduce new parameter "fFitStart" to decide from outside where - to start fitting the pedestals. - - - - 2005/03/07 Markus Gaug - - * mjobs/hilocalib_df6.root - * mjobs/hilocalib_sp2.root - - two files with the high-gain vs. logain intercalibration results. - for Digital filter and September data and Spline and December - data. - - * callisto.rc - - allow setting the variables ExtractWinLeft and ExtractWinRight. - - * mhcalib/MHCalibrationHiLoCam.h - * mhcalib/MHCalibrationCam.h - * mhcalib/MHGausEvents.h - - put the Draw-functions into the *MENU* - - * mjobs/MJCalibration.[h,cc] - - introduced reading of hi-vs.logain calibration file - - * mjobs/MJPedestal.[h,cc] - - modified range setting according Thomas S. suggestions - - * msignal/MArrivalTime.[h,cc] - - took out some commented code which will not be used any more - - improve Print() function - - - - 2005/03/05 Markus Gaug - - * msignal/MExtractTimeAndChargeSpline.[h,cc] - - removed the obsolete parts of "kMaximum" and "kHalfMaximum" in the - code which were still persistent - - set default extraction type to integral (instead of amplitude) - - set version number to 3 - - * mcalib/MCalibrationChargeCam.[h,cc] - - added new function GetAvergedConvFADC2PhePerArea for the datacheck - - * mjobs/MJPedestal.[h,cc] - - added function WriteExtractor which writes the extractor with the - new ranges to disk if fPulsePosCheck has been selected. - - * mjobs/MJCalibrateSignal.[h,cc] - - added functionality to read the updated extractor from - MJPedestalY2 (with the new extraction ranges). - - - - 2005/03/04 Abelardo Moralejo - - * mmc/MFadcDefine.h - - Changed constant SUBBINS from 5 to 500. This defines the - resolution of the analog signal simulation in the camera MC. - The time step is the duration of one FADC slice divided by - SUBBINS. The change was necessary to implement correctly the PMT - time jitter. - - - - 2005/03/03 Markus Gaug - - * mjobs/pedestalref.rc - * mjobs/calibrationref.rc - * mjobs/calibrationref_Nov04.rc - - added documentation - - * mjobs/signalref.rc - - added - - * mjobs/MJPedestal.cc - - re-added MFEventSelector which had been removed by TB on the - 15.2.2005. - - added pulse position selector, as decided at the Berlin soft- - ware meeting. - - * callisto.cc - - added SetPulsePosCheck() in MJPedestalY2 - - * mjobs/MJCalibrateSignal.cc - - updated pulse pos. calculator, can be switched off now. - - * mjobs/MJCalib.[h,cc] - - added flag fPulsePosCheck - - - - 2005/03/02 Markus Gaug - - * mjobs/MJCalib.[h,cc] - * mjobs/MJPedestal.[h,cc] - * mjobs/MJCalibration.[h,cc] - * mjobs/MJCalibrateSignal.[h,cc] - - put the storage types in the base class - - * mbadpixels/MBadPixelsCam.cc - - add some output in case that AsciiRead does not work - - * msignal/MExtractTimeAndChargeSpline.cc - - speed integration up a little bit. - - * callisto.rc - - adapt the low-gain stretch for the different pulse form for - calibration and cosmics pulses (only applied if spline is used). - - - - 2005/02/25 Markus Gaug - - * mhcalib/MHCalibrationHiLoCam.[h,cc] - - fixed bug in inter-calibration hi-logain for arrival times. - - * mhcalib/MHCalibrationPulseTimeCam.[h,cc] - - fixed the situation where the maximum bin is already found in the - low-gain samples. - - * mjobs/MJCalibration.cc - - write the MPedestalCams also to disk (needed for data-check). - - - - 2005/02/25 Abelardo Moralejo - - * msignal/MC_calibration_weights_UV.dat - - Added. Weights file for using the digital filter on MC - calibration files. For the moment the weights are the same as in - the file calibration_weights_UV.dat, only that high and low gain - have both the same weights because for the moment the MC pulse - shape is the same in both gain branches. - - - - 2005/02/24 Markus Gaug - - * mjobs/MJCalibrateSignal.cc - - include display of pulse times (calculated in the post-process) - - include the possibility for the pixel check (like in MJCalibration) - - * mhcalib/MHCalibrationHiLoCam.cc - - set default range up to 30. - - * mhcalib/MHCalibrationChargeBlindPix.h - - take the TVectors out of the streamer, to be exectuable with - root.04.02 - - - - 2005/02/24 Thomas Hengstebeck - - * macros/RFEnergyEst.C - - new macro to show the usage of RFEnergyEst class. - - - - 2005/02/24 Abelardo Moralejo - - * mtemp/mpadova/macros/resize.C - - moved MSrcPosCam output container from RunHeaders to Events tree. - - - - 2005/02/18 Marcos Lopez - - * mflux/ - - new directory to store the flux related classes. - - * mflux/MHadAlphaCut.{h,cc} - - container to store the optimal hadronness and alpha cut for each bin in - estimated energy and theta. - - * mflux/MFHadAlpha.{h,cc} - - filter to apply the hadronness and alpha cuts stored in - MHadAlphaCut. It can be selected to apply only alpha, only hadronness - cut or both. - - - - 2005/02/18 Markus Gaug - - * mhcalib/MHCalibrationPulseTimeCam.[h,cc] - - new class to histogram the arrival time of cosmics above a certain - threshold. - - * mcalib/MCalibrationPulseTimeCam.[h,cc] - - new class container with results of MHCalibrationPulseTimeCam - - * mjobs/MJCalibrateSignal.cc - - include MCalibrationPulseTimeCam to display - - - - 2005/02/18 Thomas Bretz - - * mbase/MStatusDisplay.cc: - - switch off TH1::AddDirectory during DrawClonePad - - * mjobs/MSequence.[h,cc]: - - added some code (still commented) for later use, - allowing to setup a different filename for each runfile - - added SetNight member function - - added Add*Runs member function - - with this changes MSequence can replace MRunIter now - - allow requesting of standard path from outside - (GetStandardPath) - - * Makefile: - - added sinope - - * sinope.cc: - - added (small tool to check contents of run for datacenter) - - * callisto.cc: - - added background information about Callisto - - * ganymed.cc: - - added background information about Ganymed - - * mjobs/MJCalibrateSignal.cc: - - removed special MC code. The MC files now have a lo-gain - switch and we can extract the pedestal rms from lo-gain - - don't print statistics if nothing was executed - - fixed display. The displayed pedestal RMS was the one - caluclated with a extractor but not at random position - (This only effects the display, the algorithm was ok) - - - - 2005/02/17 Markus Gaug - - * mjobs/MJCalibTest.cc - - removed bug treating the MC calibration files uncorrectly - - added Pixel-Check treatment - - * mjobs/MJCalibration.cc - - added Pixel-Check treatment - - * callisto.rc - - added pixel-check option - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - calculate high-gain signal even if saturation occurs - - - - 2005/02/17 Thomas Bretz - - * mjobs/MJStar.cc: - - fixed some missing containers in case of MC files - - * callisto.cc: - - removed obsolete second check for kModeC - - * mars.rc: - - added a lot of option to be able to use a - different signal extractor looking into uncalibrated - data - - * manalysis/MCameraData.[h,cc]: - - added Print() member function - - * manalysis/MCerPhotAnal2.[h,cc]: - - switched off writing into MCerPhotEvt - - * mdata/MDataChain.[h,cc]: - - added code to handle priorities of operators correctly - - * mhist/MHEvent.cc: - - fixed display for MPedestalRMS - - * mjobs/MJCalib.cc: - - fixed treatment of PixelCheck resource - - * mjobs/MJCalibrateSignal.cc: - - added some comments about Monte Carlo - - added MMcFadcHeader to output - - * mjobs/MJPedestal.cc: - - do not allow 'UseData' for Monte Carlos. Reason is given as - comment in the code - - * mmain/MEventDisplay.[h,cc]: - - changed such, that mars.cc allows to set the used extractor - - removed the obsolete cam.root, ped.root option - - * mmain/MCameraDisplay.cc: - - adapted to change in MEventDisplay - - - - - 2005/02/16 Javier Rico - - * mhistmc/MHMcUnfoldCoeff.[cc,h], mhistmc/Makefile, - mhistmc/HistMcLinkDef.h - - Added container class holding the histograms of the coefficients - for the (iterative) unfolding. - - * mmontecarlo/MMcUnfoldCoeffCalc.[cc,h], mmontecarlo/Makefile, - mmontecarlo/MonteCarloLinkDef.h - - Added task class to compute the coefficients for the (iterative) - unfolding. - - * macros/unfoldCoeff.C - - added macro that computes the effective areas and coefficients - from a MC input file (with OriginalMC tree and MEnergyEst - branch containing the energy estimator). This may be used - as layout for spectrum computation program. - - - - 2005/02/16 Markus Gaug - - * mdata/MDataChain.cc - - replaced ROOT version check for the compiler from 4.02.00 to - 4.01.00 - - * mranforest/MRFEnergyEst.cc - - include "TVector.h", otherwise this class does not compile - in newer root versions - - * msignal/MExtractTimeAndCharge.cc - - initialize fLoGainStartShift correctly if read from conf. file - and modified fOffsetLoGain exists. - - * msignal/*weights*.dat - - new weights with the uniform pedestal RMS. (Please use these!) - - * msignal/pulpo_weights*.dat - - new weights with the pulpo-pulse form and without NSB!! - - - - 2005/02/16 Thomas Hengstebeck - - * mranforest/MRFEnergyEst.[h,cc] - - added RF class for energy estimation - - * mranforest/MRFEnergyEst.cc - - changed calculation of estimated energy, now interpolated values - are returned - - - - 2005/02/16 Abelardo Moralejo - - * macros/starmc2.C: - - Changed the way in which the "OriginalMC" tree is copied from - the input to the output file. Now we ise the new procedure - MWriteRootFile::AddCopySource - - * mhistmc/MHMcCollectionArea.cc - - Changed default fName to "MHMcCollectionArea" - - * mtemp/mpadova/macros/resize.C - - Changed weights - - - - 2005/02/16 Thomas Bretz - - * mbase/MEvtLoop.cc: - - fixed a typo - - * mbase/MParList.cc, mfileio/MReadMarsFile.cc, - mfileio/MReadTree.cc, mfileio/MWriteRootFile.cc, - mjobs/MJStar.cc: - - optimized size of some output - - * mfileio/MWriteRootFile.[h,cc]: - - fixed CopySource option for single-file case - - * mhist/MHCamEvent.cc: - - replaced the warn in SetupFill by an inf - - * mhcalib/MHCalibrationCam.cc, mhcalib/MHCalibrationHiLoCam.cc, - mhcalib/MHCalibrationChargePINDiode.cc: - - removed obsolete output after a failed FindCreateObj (the - function itself does the output in case of failure) - - * mhcalib/MHCalibrationCam.cc: - - replaced 'err' by 'warn' for under-/overflow in lo-gain pixel, - it doesn't result in an fatal error (abort) - - * mranforest/MRanForestCalc.cc: - - added a missing debug level to some output - - * mranforest/MRFEnergyEst.[h,cc]: - - cleaned up includes - - * callisto.cc, ganymed.cc, star.cc: - - implemented enhanced handling of resource debugging - - * mbase/Makefile, mbase/BaseLinkDef.h: - - added MEnv - - * mbase/MEnv.[h,cc]: - - added - - * mjobs/MJob.[h,cc]: - - added new function to allow distribution of extranl MEnv - - replaced Bool_t by Int_t for fEnvDebug - - * mjobs/MJPedestal.cc: - - adapted to changes of EnvDebug - - - - 2005/02/15 Abelardo Moralejo - - * macros/mccalibrate.C - - fixed small bug - - * mmontecarlo/MMcCollectionAreaCalc.[h,cc] - * mhistmc/MHMcCollectionArea.[h,cc] - - Changed the way of calculating final effective area for data - analysis. The new approach requires the use of MC files produced - with the current CVS version of camera. We now make use of the - true total number of produced MC events, and allow for the - setting of a "tentative" differential gamma spectrum to be used - in the calculation of effective areas. - Removed unused constructor argument "input" in - MMcCollectionAreaCalc. - - * macros/collarea.C - - Adapted to the new way of calculating effective areas. - - - - 2005/02/15 Thomas Bretz - - * callisto.rc: - - replaced mutal exclusive options (Integral, Amplitude) by - a one-line resource - - * msignal/MExtractTimeAndChargeSpline.cc: - - replaced mutal exclusive options (Integral, Amplitude) by - a one-line resource "ExtractionType" (old code still works) - - * manalysis/MCerPhotEvt.[h,cc]: - - added new variables to store information about islands - and removed pixels - PRELIMINARY - - increased class version number - - * mfilter/MFSoftwareTrigger.cc: - - optimized output in PostProcess - - * mimage/MHImagePar.[h,cc]: - - added new histograms for new variables in MCerPhotEvt - - * mimage/MImagePar.[h,cc]: - - added new data members for the new image parameters - - increased class version - - * mimage/MImgCleanStd.[h,cc]: - - adapted image cleaning to calculate the new image - parameters - - added a flag to keep single core pixels - - * manalysis/MMatrixLoop.[h,cc], mfileio/MReadReports.[h,cc], - mfileio/MReadRflFile.[h,cc], mfileio/MReadTree.[h,cc], - mraw/MRawFileRead.[h,cc], mraw/MRawSocketRead.h: - - renamed GetFileName to GetFullFileName - - * mbase/MInputStreamID.h: - - added new member function HasStreamId - - * mbase/MParContainer.[h,cc]: - - added a static list to keep track of all created - TMathodCall objects - - * mbase/MTask.cc: - - enhanced PrintStatistics - - * mfileio/MRead.[h,cc]: - - new abstract function GetFullFileName - - added implementatio of GetFileName based on GetFullFileName - - * mfileio/MWriteRootFile.[h,cc]: - - moved open of a new file to new common member function - OpenFile - - allow to use an already existing file also when using rules - - added a new option which can be used to copy an existing - tree (without any change) from the old file into the new file. - (in principal you can also do this for some of its branches only) - This is done by AddCopySource - - * mjobs/MJCalibrateSignal.cc: - - in case of MonteCarlo files write an independant tree - 'MonteCarlo' for 'MMcEvtBasic' - - * mjobs/MJStar.cc: - - copy tree 'MonteCarlo' from old into new files - - * mjobs/MJPedestal.cc: - - removed wrong use of MFEventSelector - - * mpedestal/MExtractPedestal.cc: - - made sure that fExtractor is correctly pre- and - postprocessed. - - * mbase/MTask.cc: - - don't preprocess a task if it has been preprocessed already - - * mraw/MRawFileWrite.cc: - - if display is set write output to status line - - * mfileio/MReadTree.cc, mfileio/MReadMarsFile.cc: - - moved code to display filename in status display from - MReadMarsFile::Notify to MReadTree::Notify - - - - 2005/02/15 Markus Gaug - - * mjobs/MJCalib.h - - added GetDataFlag(), otherwise code does not compile! - - * mhcalib/MHCalibrationChargeCam.cc - - moved default saturation limit for number of high-gain events from - 0.02 to 0.05. - - * msignal/MExtractTimeAndCharge.cc - - lowered default low-gain switch from 150 to 120. (for calibration - events which saturate more than 5% of the events). - - * mjobs/MJCalib.[h,cc] - - include possibility to display pixels distributions for test - reasons - - - - 2005/02/14 Thomas Bretz - - * callisto.cc, ganymed.cc, star.cc: - - added some more information to '--help' output - - replaced MSequences by MDataSet - - implemented new debugging options (maybe not perfect yet) - --print-files and --print-found - - * mjobs/MJCut.[h,cc]: - - replaced MSequences by MDataSet - - write MEnergyEst - - recalculate MHillasSrc - - made sure both MWriteRootFile have different names - - don't use "same" option if no off-data - - * mjobs/MSequences.[h,cc]: - - removed - - * mjobs/MDataSet.[h,cc]: - - added - - * manalysis/MEventRateCalc.[h,cc]: - - added a fix which make sure, that the rate is not influenced - too much by the start of data taking - - fixed setting of mean time corresponding to rate-interval - - * mraw/MRawFileRead.[h,cc]: - - calculate total number of events from all files in PreProcess - - * mcalib/MCalibConstCam.cc: - - added case 2 to GetPixelContent - - * mjobs/MJCalibrateSignal.cc: - - fixed redirection of stream with interleaved calibration infos - - changed 'Arrival Time' to 'Calibrated Arrival Time' - - display interpolated signal in equivalent photoelectrons to - to get rid of scaling effects which makes it difficult to see - details of the structure of the inner pixels in the histogram. - With this you can immediatly see whether the relative number - of phe in the outer pixels is equiv. to the inner pixels. - - the same for the calibration factor - with the same argument - - adapted to change in MWriteRootFile - - use MReadMarsFile for Monte Carlo flag set - - * mhist/MHCamera.cc: - - changed drawing such, that NaN is not displayed anymore - - * Makefile: - - added new program ganymed - - * mfileio/MWriteRootFile.[h,cc]: - - added possibility to use UPDATE mode with rules (dangerous!) - as discussed with Abelardo, Daniel M. and Thomas S. - - * mjobs/MJStar.cc: - - adapted to change in MWriteRootFile - - added software trigger (still untuned) as suggested by - Thomas S. - - added calculation of source position before calculation - of image parameters - - added MPointingPos to Events-Tree - - removed MPointingPos from Drive-Tree - - renamed sub-tasklists to something more intuitive - - * mjobs/Makefile, mjobs/JobsLinkDef.h: - - added MJCut.cc - - * mraw/MRawFileRead.cc: - - return kERROR if ReInit fails - - * mfilter/MFSoftwareTrigger.[h,cc]: - - updated to allow using time coincidence - - changed default values - - added a pattern independant trigger algorithm - - * mbase/MDirIter.cc: - - implemented option 'dbg' in Print() - - * mjobs/MJCalib.h: - - added a getter for data-flag (should be renamed - to 'datatype' soon) - - - - 2005/02/12 Abelardo Moralejo - - * mtemp/mpadova/macros/wobblemap.C - - Added. Macro to do some studies on wobble mode data. - - * macros/mccalibrate.C - - Added option to divide the output in a train and a test sample. - Included in output new container MMcEvtBasic (if found in input - files) for later use in effective areas calculations. - - * macros/starmc2.C - - Added writing out of new container MMcEvtBasic. Removed - possibility of splitting output in train and test samples, since - this has now to be done in mccalibrate.C to make possible that - the tree OriginalMC containing MMcEvtBasic has all the original - MC events (and only those) from which the events present in the - Events tree derive. - - * macros/starmc.C - - Changed a couple of wrong "." by "->" in function calls. Changed - default tail cuts. - - - - 2005/02/12 Markus Gaug - - * msignal/MExtractTimeAndChargeSpline.cc - - change default rise time to 0.5 and default fall time to 1.5 - - * callisto.rc - - made intitializations of extractors more explicit - - * mpedestal/MExtractPedestal.cc - - make check for even number of slices in the case of "fundamental" - pedestal calc. - - * mcalib/MCalibrationChargeCalc.cc - - take out some commented code - - * mjobs/MJCalib.h - - removed GetDataFlag() - - - - 2005/02/12 Abelardo Moralejo - - * mmc/MMcTrig.hxx - - Added getter GetNumFirstLevel. This is necessary if that data - member is to be used for instance in MF filters. There was - already a getter, but it is called GetFirstLevel and hence not - recognized. - - - - 2005/02/11 Abelardo Moralejo - - * mmc/MMcEvtBasic.[h,cc]: - - New class. Contains 5 very basic MC parameters which we intend - to save for all generated Corsika events. This is needed for - proper effective area calculations. - - * mmc/Makefile, McLinkDef.h - - Added new class above. - - - - 2005/02/11 Thomas Bretz - - * mfileio/MWriteRootFile.[h,cc]: - - added the possibility to write to an already existing file. - This doesn't affect the old behaviour, but using this new feature - might still have problems. - - * mfileio/MReadReports.cc: - - fixed column-level in PrintStatistics - - * mjobs/MJCalibrateSignal.cc: - - keep MMcRunHeader in the output - - - - 2005/02/10 Abelardo Moralejo - - * macros/mccalibrate.C - - Added possibility to calibrate in photons or photoelectrons - - * macros/starmc2.C - - Added comment about value of cleaning levels - - - - 2005/02/10 Markus Gaug - - * mcalib/Makefile - * mcalib/CalibLinkDef.h - * mcalib/MCalibrate.[h,cc] - - removed mcalib/MCalibrate.* because it has been replaced by - MCalibrateData - - * mmain/MEventDisplay.cc - - replaced MCalibrate by MCalibrateData - - * mhcalib/MHCalibrationCam.cc - - replaced warning about empty histogram from red (err) by - yellow (warn). - - * mcalib/MCalibColorSet.cc - - return kTRUE in case of MC-file - - * msignal/MExtractTimaAndChargeSpline.[h,cc] - - make sure that all variables are set correctly independent on - the order of their initialization by the user - - - - 2005/02/10 Thomas Bretz - - * mgeom/MGeomCam.[h,cc]: - - added new member functions (GetNeighbors) to get all pixels - around a given pixel with a given radius - - * mars.rc: - - use same values for image cleaning as default in star - - * mpointing/MSrcPosCalc.[h,cc]: - - added the possibility to set the Source position from - a resource file - - * mjobs/MJStar.cc: - - write MMcRunHeader to RunHeaders - - * mfileio/MWriteRootFile.cc: - - removed an obsolete line - - removed a debug line which should not be there - - * mimage/MHillas.h: - - added new Getter GetDist0 returning the distance to the - camera center - - * mhflux/MHFalseSource.cc: - - the scaling in Paint() was nonsense in case we are looking - at on/off-data. Fixed. - - - - 2005/02/10 Abelardo Moralejo - - * manalysis/MMcCalibrationUpdate.h - - Added comment on new member fSignalType. Sorry for compilation - problems... I forgot to commit the header yesterday, but M. Gaug - did it. - - * macros/starmc.C - - Cleaned up a little bit, made the option to choose between - calibration in photons or phe- easier to set. - - * manalysis/MMcCalibrationUpdate.[h,cc] - - Added getter and setter for fSignalType. Set fSignalType=kPhot as - default for consistency with MCalibrateData. - - - - 2005/02/09 Abelardo Moralejo - - * manalysis/MMcCalibrationUpdate.cc - - Updated to make the MC calibration in phe- work - - * macros/starmc.C - - same as above. Now default is calibration in phe- - - * mraw/MRawEvtHeader.h - - Added setter for the trigger pattern, absolutely needed for - creating proper MC root files. - - - - 2005/02/09 Markus Gaug - - * manalysis/MMcCalibrationUpdate.h - - added missing declaration of fSignalType - - * mjobs/MJPedestal.[h,cc] - * mjobs/badpixels_0_559.rc - * callisto.rc - - allow exclusion of bad pixels from the beginning (default is - Pixel 0 and 559). - - removed some obsolete includes - - took out data member fPedestalHist from MJPedestal.h which removes - the crash, however I don't understand why it caused the crash!!! - There seem to be problems with memory usage either in callisto.cc - or in this class!! - (valgrind shows several memory leaks in the TG... classes). - - * mjobs/MJCalibration.cc - - write display and containers also in case of failure of eventloop - - * mhcalib/MHGausEvents.cc - - make default display window 600x600 - - * mcalib/MCalibrationQECamMagic.cc - - updated five pixels - - * mpedestal/MExtractPedestal.[h,cc] - * mpedestal/MPedCalcPedRun.cc - * mpedestal/MPedCalcFromLoGain.cc - - included possibility for intermediate pedestal cam (not yet used) - - * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.cc - - initialize the bad events counters to 0 also in constructor - - release the limit for bad events a bit - - * mcalib/MCalibrationTestCam.h - - take out include of TArrayI (already in base class) - - * mcalib/MCalibrateData.h - - make default argument for SetSignalType kPhe. - - * mjobs/MJCalibrateSignalFromOuside.[h,cc] - - removed - - - - 2005/02/08 Markus Gaug - - * mhcalib/MHCalibrationCam.cc - * mcalib/MCalibrationChargeCalc.cc - - replaced GetNumExecutions()==0 condition by GetNumExecution() < 1 - - - - 2005/02/08 Thomas Bretz - - * mpointing/MPointingPosInterpolate.cc: - - use debug option in addition to switch off output from internal - eventloop. It is confusing having this output inside another - eventloop. - - updated missing connections in class description - - * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.cc: - - made sure that output of PostProcess fits into 80col boundary - - * mimage/MHillas.cc: - - removed an obsolete call to TLine::Paint() in Paint. - - - - 2005/02/07 Thomas Bretz - - * mbase/MFilter.cc: - - use paranthesis around ClassName in GetRule - - * mdata/MDataFormula.h: - - fixed a wrong comment in variable description - - * mhist/MHCamEvent.[h,cc], mhist/MHCamera.[h,cc], - mjobs/MJCalibrateSignal.cc, - mjobs/MJCalibrateSignalFromOutside.cc: - - to make sure there are no missunderstandings we have to - replace all occurances of 'Variance' by 'SqrtVariance' - (it was not my decision) - - * mastro/MAstro.[h,cc]: - - added new function Angle2Coordinate - - * mbase/MTaskEnv.[h,cc]: - - fixed a bug which caused the resource task to be ignored - if the default task was '' - - * mhbase/MH3.cc: - - fixed a bug in Paint (use GetListOfPrimitives->FindObject - instead of FindObject) which caused the histogram to - be put a lot of times into the pad. - - * mjobs/MJCalib.[h,cc]: - - derived MJCalib from MJob in order to be able to move - common code from derived classes into the base-class - - implemented CheckEnvLocal to handle the resource 'DataType' - - changed publicity of some variables and functions - to allow setting file type from outside - - added new function to set data-type for use in callisto.cc - - * mjobs/MJCalibTest.[h,cc], mjobs/MJCalibrateSignal.[h,cc], - mjobs/MJCalibration.[h,cc], mjobs/MJPedestal.[h,cc]: - - removed double inheritance, replaced by single inheritance - from MJCalib - - replaced code to handle the resource 'DataType' by the - common code in the base class - - put reading of reference file into a new member function - to make source code reading resource file simpler and to - be able to write a function description about it (simple - copy&past) - - * callisto.cc: - - added option for file-type - - * mjobs/MJOptimize.[h,cc], mjobs/MSequences.[h,cc], - mjobs/MJCut.[h,cc], ganymed.[cc,rc], mhflux/MHEnergyEst.[h,cc]: - - added to repository, but not yet to Makefile because - there is still some work to be done. But whoever is - interested in the new classes/program may already use it. - - * mhflux/MAlphaFitter.[h,cc]: - - added option to choose the minimization value - - * mhflux/MHAlpha.cc: - - replaced significance by minimization value - - * mhflux/MHEffectiveOnTime.cc: - - use E-Option when fitting to improve error calculation - by using Minos technique - - - - 2005/02/04 Markus Gaug - - * mjobs/MJCalibration.cc - - found a "the `impossible' happened" when running callisto with - a pure signal extractor --> MExtractTimeFastSpline has some - problems with the management of the internal arrays. Replaced it - by MExtractTimeHighestIntegral as default which is as good. - - * callisto.rc - - use MExtractTimeAndChargeDigitalFilterPeakSearch as default - instead of MExtractTimeAndChargeDigitalFilter. This extractor is - now tested and checks for the positions of the pulse within the - DAQ-window. - - - - 2005/02/04 Thomas Bretz - - * Makefile.rules: - - fixed creation of main MDep.d - - * callisto.cc, merpp.cc, showlog.cc, showplot.cc, star.cc: - - added commandline option --version - - * mbase/MFilter.cc: - - changed default for 'GetRule' - - * mbase/MParContainer.cc: - - simplified GetNewObject - - * mfbase/MF.cc: - - if no conditional sign is found try to create - MFilter-object - - * mraw/MRawEvtData.cc: - - fixed the initialization of fABFlags in case maxid==0 which - is the default. This caused MRawEvtPixelIter::HasABFlag - to do unallowed access to memory for old root-files without - the AB flag, because it assumed (due to size==1) that the - data contains the ab flag - - * mraw/MRawEvtPixelIter.[h,cc]: - - removed some obsolete debug comments - - simplified HasABFlag - - * manalysis/MCerPhotPix.h: - - removed the `!` again. It gave problems with the Mars - display. We agreed that this is a minor problem because - the structure of MCerPhot* will chnage soon in any case. - - - - 2005/02/04 Abelardo Moralejo - - * macros/starmc2.C - - added to output missing container MConcentration. - - - - 2005/02/03 Thomas Bretz - - * mfbase/MFilterList.[h,cc]: - - added new function AddToList(TCollection&) - - * mhbase/MFillH.cc: - - print a warning if 'same'-option given without - a corresponding existing tab - - * mhflux/MHAlpha.[h,cc]: - - made time bins settable by user - - * mfileio/MWriteRootFile.cc: - - fixed ReInit and a warning output when writing to memory - - - - 2005/02/03 Markus Gaug - - * mcalib/MCalibColorSet.[h,cc] - - implement possibility to set colour explicitely (e.g. for MC). - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - intialize fTimeShiftHiGain and fTimeShiftLoGain by default. - - * mjobs/MJPedestal.cc - - in case, extractor is used, put the extractor into the tasklist, - otherwise ranges do not get initialized correctly (wrong memory - usage!). Use an event selector, however to not skip the Process. - This is as fast as before and now safe for any kind of extractor - - * mcalib/MCalibrationCam.h - * mcalib/MCalibrationTestCam.h - * mcalib/MCalibrationTestCam.cc - - initialize a missing array in InitAverageAreas - - * mraw/MRawEvtHeader.h - - introduced Setter() of cal. pattern for Abelardo - - - - 2005/02/02 Markus Gaug - - * mcalib/MCalibrationChargeCam.cc - - fixed small bug in the display of mean charges when low-gain was - used. - - * msignal/MExtractor.cc - - print the missing overlap between high-gain and low-gain - in the Print() function - - remove setting of fHiLoLast in PreProcess, otherwise cloned - extractors do not work any more with windows exceeding the - high-gain range. - - * mhcalib/MHCalibrationTestCam.[h,cc] - * mhcalib/MHCalibrationTestTimeCam.[h,cc] - - set proper probability limits for the fits - - * mcalib/MCalibrateData.cc - - catch the case in which no interlaced cal. events are being sent - by the pulser box. - - * mjobs/MJCalib.[h,cc] - - put the data type enum in a new base class - - * mjobs/MJCalibTest.[h,cc] - - re-name old class MJExtractCalibTest to MJCalibTest and make it - compatible with the sequence-files. - - * mjobs/MJExtractCalibTest.[h,cc] - - removed - - * mjobs/MJCalibrateSignal.cc - - put a compiler warning about the default cal. to photo-electrons - - * callisto.cc - - add new flag "--use-test" to enable the MJCalibTest facility - (default: not used) - - - - 2005/02/01 Raquel de los Reyes - - * mjobs/MSequence.h - - Added "Get" functions for the TArrays variables. - - - - 2005/02/01 Markus Gaug - - * mjobs/MJPedestal.[h,cc] - * mjobs/MJCalibration.[h,cc] - * mjobs/MJCalibrateSignal.[h,cc] - * callisto.rc - - put enum for data type. Can now set the data type (mc, raw, root) - without running the data check. - - * mhcalib/MHCalibrationCam.cc - - return kTRUE in PostProcess if GetNumExecutions is 0 - - * mcalib/MCalibrationChargeCalc.cc - - return kTRUE in PostProcess if GetNumExecutions is 0 - - - - 2005/02/01 Daniel Mazin - - * MPointingPosInterpolate.cc: - - fixed bug to match the units of Ra and Decl in MPointingPos - - fixed bug in handling of events with times outside of times from - MDrive tree - - - - 2005/02/01 Thomas Bretz - - * showplot.cc: - - another fix to make the batch mode working (you can use the batch - mode to convert a root-file into another format) - - - - 2005/01/31 Thomas Bretz - - * mbase/MStatusDisplay.cc: - - fixed handling of batch mode in GetCanvas(const TString &name) - - don't skip already existing tabs in Display() - - - - 2005/01/31 Raquel de los Reyes - - * mjobs/MSequence.h - - Added "Get" functions for some of the sequence.txt file - parameters. - - - - 2005/01/31 Markus Gaug - - * mjobs/MJob.[h,cc] - * mjobs/MJCalibrateSignal.[h,cc] - * mjobs/MJCalibration.[h,cc] - - move file type enum to base class - - * mjobs/MJCalibrateSignal.[h,cc] - - allow also for direct setting of an MRunIter (not used in - callisto). - - * mcalib/MCalibrationChargeCalc.[h,cc] - - test also for pulser strength changes additionally to changes in - colour. - - - - 2005/01/31 Abelardo Moralejo - - * mpointing/MSrcPosCalc.cc - - Create only one instance of MAstroSky2Local for the - transformations, instead of two identical ones, as it was before. - - - - 2005/01/30 Markus Gaug - - * mjobs/MJCalibration.cc - * mjobs/MJPedestal.cc - * mjobs/calibrationref_Nov04.rc - * mhcalib/MHCalibrationRelTimeCam.[h,cc] - - updated correct display of reference lines - - - - 2005/01/29 Markus Gaug - - * msignal/MExtractFixedWindowSpline.[h,cc] - - fixed a bug occurring with overlapping windows between high-gain - and low-gain - - * msignal/MExtractFixedWindowPeakSearch.cc - - take out call to fSignals->Clear() which is already done in - MTaskList. - - * msignal/MExtractTimeAndChargeDigitalFilterPeakSearch.[h,cc] - - new extractor reducing the bias and solving the problem with the - jumping pulse readout. - - - - 2005/01/28 Abelardo Moralejo - - * mpointing/MSrcPosCalc.cc - - updated. Make it work as desired: obtain for each event the x,y - position on the camera of a source whose celestial coordinates - (J2000) have been set by the user in the container "MSourcePos" - of type MPointingPos, added to the parameter list. If the - container MSourcePos is not found, the center of the camera (or - other fixed position x,y set in the parameter list by the user - - in MSrcPosCam) is used as source position for all the events in - the loop. - - - - 2005/01/28 Thomas Bretz - - * mjobs/MJCalibrateSignal.cc: - - fixed that extract1,2,3 haven't been deleted if loop failed. - - print tasklist also if loop failed. - - added a undefined task (MTaskEnv "FinalFantasy") as last task to - the event processing tasklist - - * callisto.rc: - - added comments about "FinalFantasy" into call - - added comment for obsolete resources as discussed yesterday - evening: TimeUpperLimit - - * mbase/MMath.[h,cc], manalysis/MCerPhotPix.[h,cc], - mpedestal/MPedPhotPix.h: - - replaced TruncatePrecision by ReducePrecision (its simply a better - name) - - * mbase/MParList.cc: - - added a check to make 200%(!) sure that the container added - to the list is a MParContainer (everything else could crash - almost everything in Mars!) - - * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.[h,cc], - mjobs/MJPedestal.cc: - - simplified the code in the WriteResult functions by using - the new WriteContainer in MJob - - removed the TObjArray from the MParList! It is NOT a MParContainer - there are a lot of circumstance how this can crash Mars. I don't - know why the compiler allowed for this. - - unified WriteResult and WriteHists - - split GetOutputFile into two functions for simplification - - * mjobs/MJCalibration.h: - - copy the extractorcam name when copying the contents - - * mjobs/MJob.[h,cc]: - - new member function WriteContainer to simplify code in derived - classes - - * mpointing/MSrcPosCalc.[h,cc] - - fixed the header according to Abelardo's changes - - added the initialization of the pointers to the constructor - - - - 2005/01/28 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - introduce a security check for the time fine adjustment in case, - it is too large. - - * mcalib/MCalibConstCam.[h,cc] - * mcalib/MCalibConstPix.h - - new classes to allow display of changing cal. constants with the - interlaced cal. events - - * mcalib/MCalibrationChargeCalc.cc - - removed stopping of PostProcess in case that the evtloop is - finished with interlaced cal. events - - * mcalib/MCalibrateData.[h,cc] - - fill MCalibConstCam with update results (once per calib. consts - update == every 10 sec.) - - introduce check for size of calibration constant. In case, it is - completetly out of range, set the MBadPixelsPix::IsUnsuitableRun - - * mjobs/MJCalibrateSignal.cc: - - display one MHCamera more with changing conv. factors (only for - interlaced cal. events) - - * mpedestal/MPedCalcFromLoGain.cc - - set default for MExtractWinFirst from 15 to 17 because of the - late cosmics signals in December - - - 2005/01/28 Abelardo Moralejo - - * mtemp/mpadova/macros/trainsubsample.C - - added # of events to be written in the output (instead of - fraction of total). Moved MSrcPosCam in output from RunHeaders - to Events tree. - - - - 2005/01/27 Daniel Mazin and Markus Gaug - - * mcalib/MCalibrateData.[h,cc] - - derive this class from MCamEvent in order to be able to display - evolution of conversion factors in case of interlaced cal. - events - - * mpointing/MInterpolatePointingPos.[h,cc] - - new class to interpolate pointing positions, adapted from a class - by Marcos Lopez - - * mjobs/MJCalibrateSignal.[h,cc] - - enabled the calibration of data with interlaced calibration events - - * msignal/MArrivalTime.[h,cc] - * mcalib/MCalibrateRelTime.cc - - removed Error of calibrated arrival time, as agreed on the last - software calibration meeting yesterday - - * mjobs/MJCalibrateSignal.cc - - add display to show histogramming of conversion factors - - modify default calibration to equiv. photo-electrons - - allow for setting of MC, Raw or Root-file type in callisto.rc - - * callisto.rc - - updated conf. file - - - 2005/01/27 Thomas Bretz - - * callisto.cc: - - don't display starting pedestals when calibrating the signal - - * callisto.rc: - - added some comments - - * star.rc: - - according to Daniel M. we have agreed to change the default - cleaning level to adapt it roughly to the new pedestal - - * manalysis/MCerPhotPix.[h,cc], mpedestal/MPedPhotPix.h: - - as agreed in the current calibration meeting we truncate the - precision of the stored floating point values to roughly 0.5% - to gain storage space in the calibrated data (the gzip - algorithm compresses this stuff nicely - we gain roughly 15%) - - * mhflux/MHFalseSource.cc, mjobs/MJCalibration.cc, mjobs/MJStar.cc: - - added a comment - - * mjobs/MJCalibrateSignal.cc: - - changed title of unsuitable plot - - removed plot for calibrated fundamental pedestal as agreed in the - current calibration meeting (we may change this to an option) - - * mjobs/MJPedestal.[h,cc]: - - changed the name of the "PedDiff" plot to be consistent with the - other tab-name - - changed the options for the display - - removed the dependancy of fDisplayType and the SetDataCheck - option - - added option kDisplayNone - - renamed enums from k*Display to kDisplay* - - * mhist/MHCamEvent.cc: - - trying to get rid of the Err_%p workaround. - - * manalysis/MCerPhotEvt.[h,cc]: - - added some '!' signs in the comment line. This is quick hack - to gain I/O speed and storage space. We will soon have new - containers for the calibrated data and image cleaning - information. - - changed version number to 6 - - * mhist/MHCamera.cc: - - added member function SetAllUsed - - - - 2005/01/26 Abelardo Moralejo - - * macros/mccalibrate.C - - removed creation and writing out of MSrcPosCam. It is more - flexible to add it in starmc2.C if needed (for wobble mode for - instance). - - * mtemp/mpadova/macros/RanForestDISP.C - - added possibility to set the number of hadrons read in for the - training. Added some missing containers to output. - - Fixed rule concerning the DISP, by adding parentheses. Remember - that MHMatrix::AddColumn does not respect the usual precedence - of operations! - - * mtemp/mpadova/macros/resize.C - - added to output missing container MRawEvtHeader - - * macros/starmc2.C - - added missing container MImagePar. Added possibility to set the - source position on the camera (for the wobble mode). - - - - 2005/01/25 Abelardo Moralejo - - * macros/starmc2.C - - modified to allow double (train / test) output, for g/h - separation studies. Added several missing containers to output. - - - - 2005/01/25 Thomas Bretz - - * mcalib/MCalibrationIntensityChargeCam.cc: - - fixed a lot of 'default argument'-warnings to make to code - compile - - * mbase/MParContainer.[h,cc]: - - moved the empty Reset() function into the source file and - added a lot of comments - - implemented new helper-functions: GetNewObject - - * mbase/MContinue.[h,cc]: - - allow to use MFilter-classes as filter in ReadEnv - - * mbase/MTaskEnv.cc: - - replaced some code by GetNewObject - - * mhbase/MFillH.cc: - - handle DrawOption "same" to be able to draw to the same pad - - * mhbase/MH.[h,cc]: - - added same-argument to DrawSame - - * mhbase/MH3.cc: - - removed some obsolete comments - - remove own drawing options before calling fHist->Draw - - * mimage/MHHillas.cc, mimage/MHImagePar.cc: - - first try of implementing 'same' drawing option - - - - 2005/01/25 Markus Gaug - - * mcalib/MCalibrationPattern.[h,cc] - * mcalib/MCalibrationPatternDecode.[h,cc] - - New Decoder task for the calibration pattern from the - digital modules - - * mraw/MRawEvtHeader.[h,cc] - - remove decoding from this class - - * mcalib/MCalibrationIntensityHiLoCam.[h,cc] - - remove, because one needs anyhow much more than one data file - to get a reasonable conversion factor - - * mcalib/MCalibCalcFromPast.[h,cc] - - remove MCalibrationIntensityHiLoCam - - * mbadpixels/MBadPixelsPix.h - * mbadpixels/MBadPixelsCam.cc - - changed one function name to GetUnsuitableCalLevel() - - * mjobs/MJCalibration.cc - - replace all Y-titles with units "FADC counts" by "FADC cnts" and - "FADC slices" by "FADC sl.", otherwise they range out of the - canvas. - - * mcalib/MCalibrationChargeCalc.cc - - ensure to set the color correctly in MCalibrationBlindCam - - * callisto.rc - - put space for - MJCalibrateSignal.ExtractSignal.HiGainFirst: 2 - MJCalibrateSignal.ExtractSignal.HiGainLast: 16 - - - 2005/01/24 Abelardo Moralejo - - * manalysis/MMcCalibrationUpdate.cc - - Adapted to changes in MCalibrateData from 2005/01/16: moved - qepix.SetAvNormFFactor(1.) from Process() to ReInit(). Due to - this, for the last week you may have found trouble running - starmc.C and mccalibrate.C. - - - - 2005/01/24 Thomas Bretz - - * callisto.cc: - - removed non-existing option from output - - * manalysis/MEnergyEstimate.[h,cc]: - - added ReadEnv member function - - * mbase/MContinue.[h,cc]: - - implementes AllowEmpty option to support doing nothing - defined in resource file - - added a first draft to allow usage of class-filters instead of - rules - - * mbase/MMath.[h,cc]: - - implemented a function suggested by Florian Goebel which reduces - the precision of a float to ~0.5% which is usefull for data - compression by gzip - - * mdata/MDataChain.[h,cc]: - - implemented ReadEnv member function - - * mfbase/MF.cc: - - a small enhancement to the output in ReadEnv - - * mhbase/MH3.cc: - - fixed call to FindObject in Paint which caused a profile to be - displayed incorrectly in case it was read from a file - - * mhflux/MHFalseSource.[h,cc]: - - removed old obsolete unsused Significance functions - - implemented ReadEnv member function - - set false source binning only if BinningFalseSource is not default - - check parlist for BinningAlpha - - * mjobs/MJCalibrateSignal.cc, mjobs/MJCalibration.cc, - mjobs/MJPedestal.cc: - - added an additional check and output if output-file could - not be opened - - * mjobs/MJob.h: - - added some Getter - - * mhbase/MBinning.[h,cc]. - - added nen member functions - + SetEdgesRaw - + ReadEnv - + Print - - * mhflux/MAlphaFitter.[h,cc]: - - added new member function ReadEnv - - * mhflux/MHAlpha.cc: - - fixed a problem when fitting without off-data - - * mbase/MStatusDisplay.cc: - - implemented a further fix in DrawClonePad to make sure - that the X-stuff doesn't get confused while still - GetDrawOption returns the correct value - - - - 2005/01/24 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - introduced security check for the times fine-tuning to catch - outliers because of deviating pulse forms. - - * msignal/MExtractTime.cc - * msignal/MExtractor.cc - - lowered default high-gain saturation limit to 250 - - removed Clear() for two results containers at beginning of Process() - - * msignal/MExtractor.h - - Take fHiLoLast into the Clone() - - * msignal/MExtractedSignalPix.cc - - change sign of default initializer to negative. - - - - 2005/01/23 Markus Gaug - - * mhcalib/MHCalibrationHiLoCam.[h,cc] - - updated to new logain switch setting in MExtractTimeAndCharge - - extract also high-gain vs. low-gain time difference - - * mhcalib/MHCalibrationCam.[h,cc] - * mhcalib/MHCalibrationChargeCam.[h,cc] - - updated reading of conf. values in ReadEnv - - * mhcalib/MCalibrationHiLoCam.[h,cc] - * mhcalib/MCalibrationHiLoPix.[h,cc] - * mhcalib/MCalibrationIntensityHiLoCam.[h,cc] - - updated accordingly - - * mbadpixels/MBadPixelsCam.cc - - removed some bugs in the Print() function - - - - 2005/01/22 Markus Gaug - - * mhcalib/MHCalibrationRelTimeCam.cc - - display in the averaged times display the event-by-event averaged - absolute arrival times instead of the rel. ones which do not make - much sense. - - * mhcalib/MHCalibrationTestTimeCam.[h,cc] - * mhcalib/MHCalibrationTestCam.[h,cc] - - update to the latest changes in analysis chain. - - * mjobs/MJExtractCalibTest.[h,cc] - - update to the latest changes in analysis chain. - - * mjobs/MJCalibration.cc - - replace title of that times-averageing Tab from "RelTimes" by - "Times". - - * macros/calibration.C - - update to changes in MJExtractCalibTest - - - - 2005/01/21 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - * msignal/MExtractTimeAndChargeSlidingWindow.cc - * msignal/MExtractTimeAndChargeSpline.cc - - use the max. bin content for low-gain extraction - - * callisto.rc - - add place for LoGainSwitch - - - - 2005/01/21 Florian Goebel - - * mfbase/MF.cc: - - include a (TString) cast to make it compilable with gcc2.95.3 - - - - 2005/01/21 Thomas Bretz - - * mpointing/MSrcPosFromModel.cc: - - fixed crash in Process if no pointing model available - - * mpointing/MPointingPosCalc.h: - - added missing initialization of data members - - * mastro/MObservatory.[h,cc]: - - added ReadEnv member function - - * mbase/MTaskEnv.h: - - added (=0) default to SetDefault - - - - 2005/01/20 Markus Gaug - - * mcalib/MCalibrationIntensityChargeCam.[h,cc] - - added function to display fluctuations of a variable - - * mcalib/MCalibrationPix.cc - - fixed small bug in High-gain mean error. - - * msignal/MExtractTimeAndCharge.[h,cc] - - introduced high-gain maximum limit before extracting the low-gain - - - - 2005/01/20 Thomas Bretz - - * mbase/MContinue.[h,cc]: - - added ReadEnv member function to support resource files - - * mbase/MEvtLoop.[h,cc]: - - added a second arguemtn to reading of the resource file by name - - added some checks when reding the resource file and the - parameter list hasn't been setup - - * mbase/MParList.cc: - - removed an obsolete output from ReadEnv - - * mfbase/MF.[h,cc]: - - added ReadEnv member function to support resource files - - added kAllowEpty flag to support skipping by resource files - - * mfbase/MFilterList.cc: - - added a comment - - * mbase/MStatusDisplay.[h,cc]: - - fixed Write to be compatible with root 4.02/00 - - worked around a problem with reading the DrawOption correctly - from a stored status display - - - - 2005/01/19 Thomas Bretz - - * mbase/MMath.cc: - - added a comment to SignificanceLiMa, made by Daniel Mazin - - also check for b==0 - - * mhflux/MAlphaFitter.[h,cc]: - - fixed significance calculation in case of on-off data - - added fScaleFactor - - * mhflux/MHAlpha.[h,cc], mhflux/MHFalseSource.cc: - - handle scale factor in case of on-off observations - - * mjobs/MJPedestal.cc: - - aligned screen output to 80col rule - - * mtrigger/MFTriggerPattern.[h,cc]: - - assigned correct integers to enum - - made sure that the enum is correctly handled in all function by - applying a r-value to the condition - - - - 2005/01/19 Abelardo Moralejo - - * mtrigger/MFTriggerPattern.[cc,h] - - Changed Bool_t arguments of all setters to new type Prescale_t - defined by N. Galante (see below) - - - - 2005/01/19 Nicola Galante - - * mtrigger/MFTriggerPattern.[cc,h] - - added in header enum Prescale_t { kUnPrescaled = kFALSE, - kPrescaled = kTRUE }; - - - fixed a bug in Process, both fMaskRequiredUnprescaled and - fMaskRequiredPrescaled are checked simultaneously. - - - - 2005/01/18 Markus Gaug - - * mcalib/MCalibColorSet.cc - - fixed the remaining day of data without colour in project name - neither in digital modules bits. - - * mpedestal/MPedCalcPedRun.[h,cc] - - catch the continuous light runs with MRawRunHeader::fRunType - == kRTCalibration to be recognized as effective pedestal runs. - - - 2005/01/18 Thomas Bretz - - * mbase/MMath.cc: - - added a check for s==0 in SignificanceLiMa, because otherwise the - result is NaN - - * mfbase/MF.cc: - - removed an obsolete debugging output from the latest changes - - * mhflux/MHAlpha.cc: - - reset fHTime, too - - - - 2005/01/18 Nicola Galante - - * mtrigger/MFTriggerPattern.cc: - - added parentesis to ensure bitwise operators priority - with respect to logical operators. - - - 2005/01/17 Thomas Bretz - - * manalysis/MEnergyEstimate.[h,cc]: - - changed to be more general. Energy is now estimated from a rule - (MDataChain) The default behaviour is still the same as before - to copy the energy from MMcEvt - - * mbase/MTask.cc: - - changed to write out the descriptor istead of the task-name only - in Pre/PostProcess - - * mhbase/MH.cc: - - initialize fSerialNumber and fNumExecutions in constructor - - * mhflux/MHFalseSource.cc: - - according to a suggestion by Markus Mayer I have changed - \\sigma_{max}=f to S_{max}=f\\sigma - - * mjobs/MJCalibrateSignal.cc: - - as discussed with Markus and Abelardo fixed the MFTriggerPattern - call. - - * mtrigger/MFTriggerPattern.cc, mtrigger/MTriggerPattern.cc, - mtrigger/MTriggerPatternDecode.cc: - - added some comment about file version - - * mbase/MFilter.h: - - implemented new virtual function GetDataMember like in MData - - * mbase/MTask.[h,cc]: - - when filter is added ass GetDataMember to branch list (should be - obsolete, because filter is in the tasklist, but it should not hurt) - - * mfbase/MF.[h,cc], mfbase/MFDataChain.[h,cc], mfbase/MFDataMember.[h,cc], - mfbase/MFilterList.[h,cc]: - - implemented new function GetDataMember - - - - 2005/01/17 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - remove a situation where the high-gain signal can be 0. - - * mtrigger/MTriggerPattern.h - - fixed a bug in defining the trigger bit pattern (Have to start - from 0 instead of 1) - - * mjobs/MJPedestal.cc - * mjobs/MJCalibrateSignal.cc - - fixed default extraction ranges. - - * callisto.rc - - fixed default weights files for pedestal extraction for cosmcis - - * mcalib/MCalibrationChargeCalc.cc - - removed program exit on occurrance of multiple colours without - intensity calibration - - - - 2005/01/17 Nadia Tonello and Markus Gaug - - * mcalib/MCalibrationChargeCam.cc - - some fit improvements in the function GetAveragedConvFADC2PhotPerArea - - - - 2005/01/16 Markus Gaug - - * mhcalib/MHCalibrationCam.[h,cc], mhcalib/MHCalibrationRelTimeCam.[h,cc], - mhcalib/MHCalibrationChargeCam.[h,cc] - - put overflow management and results camera initialization into - base class - - * mcalib/MCalibrateData.[h,cc] - - added possibility to re-normalize signal to equiv. photo-electrons - ( SetSignalType(MCalibrateData::kPhe) ). - Default is old version in photons - - speed up Process by storing pre-calculated calibration constants - in arrays (needed 40% of CPU time of the eventloop before, now: 23%) - - added new pointer to different MCalibrationChargeCam used for - updates - - added possibility to update the conversion factors using the - MCalibrationChargeCam stored in fCalibUpdate. - - added Print() function - - * mcalib/MCalibCalcFromPast.[h,cc] - - committed final version, now also in the Makefile - - * mjobs/MJCalibrateSignalFromOutside.[h,cc], macros/calibration.C - - committed final version, now able to calibrate interlaced cal. - events. - - - - 2005/01/14 Hendrik Bartko - - * msignal/calibration_weights_UV.dat - - fixed a small bug in the noise autocorrelation of the AB-noise - - * msignal/calibration_weights_blue.dat - - new weights file for blue calibration pulses - - * cosmics_weights.dat - - fixed a small bug in the noise autocorrelation of the AB-noise - - - - 2005/01/14 Markus Gaug - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - added a small acceleration of the program, tested by Hendrik and - me. - - * mpedestal/MPedCalcFromLoGain.cc - - fixed one warning output which was not a real warning. - - * mcalib/MCalibrationChargeCam.cc - - improved the function to calculate a mean conversion factor over - the whole camera including a fit to the values. - - * mpedestal/MPedCalcPedRun.[h,cc] - - undo some changes introduced by TB on 2/12/04 which had made the - use of interlaced pedestal events impossible again. - - Use now the new class MTriggerPattern directly to recognize an - interlaced pedestal event. - - - - 2005/01/14 Thomas Bretz - - * callisto.cc: - - fixed a typo in output - - * manalysis/MGeomApply.cc: - - removed some old code already in comments - - added possibility to switch off automatic processing (used - if two different geometries around) - - * manalysis/MMultiDimDistCalc.cc, mhbase/MHMatrix.[h,cc], - mranforest/MRanForestCalc.cc, mtools/MHSimulatedAnnealing.[h,cc], - mtools/MSimulatedAnnealing.h: - - added include of TVector because in newer root version it is - not included from TMatrix anymore - - * mbase/BaseLinkDef.h, mbase/MMath.[h,cc]: - - to stick to the convention of TMath in newer root versions MMath - changed from a class to a namespace - - * mbase/MEvtLoop.[h,cc]: - - to support newer root version added a second Write-function - with a const qualifier. - - * mdata/MDataChain.cc: - - changed access to TMath for newer root versions - - * mfileio/MChain.[h,cc]: - - implemented a workaround for teh changed LoadTree definition - in newer root-versions - - * mfileio/MReadTree.cc: - - fixed a bug in CheckBranchSize caused some warning to be - displayed - - * mhflux/MHAlpha.cc: - - removed check for fResult in PostProcess (it is always there) - - * msignal/MExtractTimeFastSpline.cc: - - fixed delete --> delete[] - - * mbadpixels/MBadPixelsCalc.cc: - - slight change to some output - - * mbase/MTaskEnv.h: - - set name of default task when pointer is given - - * mjobs/MJCalibrateSignal.cc: - - fixed handling of extraction range for various cases - - fixed handling in case no arrival times are calculated - - * mjobs/MJCalibration.cc: - - write at least a default arrival time calibration container - to make further processing easier - - * mjobs/MJPedestal.[h,cc]: - - fixed handling of extraction range for various cases - - - - 2005/01/14 Abelardo Moralejo - - * mtemp/mpadova/macros/trainsubsample.C, RanForestDISP.C - - added. Two macros used in the analysis of real wobble mode data. - - - - 2005/01/14 Daniela Dorner - - * macros/sql/filldotrun.C - - added new arehucas-verions and changed code accordingly - - - - 2005/01/13 Abelardo Moralejo - - * macros/starmc.C - - Added (commented) lines for the case of gamma MC source off-axis - (wobble mode). Changed default extractor to - MExtractFixedWindowPeakSearch. - - - - 2005/01/13 Raquel de los Reyes - - * callisto.rc - - introduced several configuration lines - (format: "class".DataCheck: No) to allow callisto - to run with rawfiles. Necessary for the datacheck. - - - - 2005/01/13 Markus Gaug - - * mcalib/MCalibColorSet.cc - - fixed runs 45605-45609 - - * msignal/MExtractor.h - - take out the variable fHiLoLast from the streamer. Will be - initialized in the ReInit(), if needed - - * msignal/MExtractor.cc - - Initialized fHiLoLast to 0. Otherwise, a second eventloop with - the same extractor may have that variable set to a certain - value, even if not desired. The ReInit() fixes fHiLoLast, if - different from 0. - - * mpedestal/MExtractPedestal.cc - * mpedestal/MPedCalcPedRun.cc - * mpedestal/MPedCalcFromLoGain.cc - - fix the output of the print to the correct value for the case - that the extractor is used. - - - 2005/01/13 Thomas Bretz - - * callisto.rc: - - fixed some typos - - * mbase/MLog.cc: - - unset DEBUG defined unintentionally - - * msignal/MExtractTimeAndChargeDigitalFilter.cc: - - removed printing Weights in InitArrays, because otherwise - the output of a full data calibration is totally crowded - with numbers. Having the weights-file name on the display - is perfectly enough. - - - - 2005/01/12 Markus Gaug - - * mcalib/MCalibrationIntensityRelTimeCam.cc - - added fit to improve averageing of the obtained results - - - - 2005/01/12 Thomas Bretz - - * manalysis/MMatrixLoop.cc: - - changed name to MRead because it now derives from MRead - - * mbase/MEvtLoop.[h,cc]: - - implemented an option not to cascade the status display to the - parameter list in PreProcess - - * mhflux/MHAlpha.cc: - - changed name of "Significance" to "MinimizationValue" - - return -significance to have a value being minimized - - * mhist/MHCamera.cc: - - fixed output of text in legend - - * mhist/MHEvent.[h,cc]: - - implemented new options for calibrated pedestals - - * mmain/MEventDisplay.cc: - - fixed to support latest changes in MJCalibrateSignal - - * mpedestal/MPedPhotCam.cc: - - added new options in GetPixelContent (4 and 5) to support - a correct camera display - - * mjobs/MJCalibrateSignal.cc: - - fixed display of calibrated pedestal and pedestal rms - - changed order of plots. Now all interpolated values - (means all calibrated values which are bad-pixel treated) - are displayed behind the unsuitable pixels. - - * mjobs/MJ*.cc: - - corrected all wrong %06d to %08d to fit the number of - digits in run-numbers - - - - 2005/01/11 Abelardo Moralejo - - * mjobs/Makefile - - added missing include -I ../mtrigger - - - - 2005/01/11 Thomas Bretz - - * callisto.cc, callisto.rc: - - changed such, that all three kinds of pedestals are calcualted - (usefull for studies) - - * manalysis/MMatrixLoop.[h,cc]: - - derived from MRead - - implemented some basic functions from MRead - - * mfilter/MFCosmics.[h,cc]: - - allow setting of name of MPedestalCam - - * mhbase/MBinning.[h,cc]: - - added SetEdges taking MParList as input - - * mhflux/MHAlpha.cc: - - use new function from MBinning - - * mjobs/MJCalibrateSignal.[h,cc]: - - changed to calculate all three kinds of pedestals - - added filters for trigger pattern and illuminated events - - * mjobs/MJPedestal.cc: - - give different names to tabs with different pedestals - - * mjobs/MJStar.cc: - - on request changed used pedestal from "FromExtractor" to - "FromExtractorRndm" - - * mtrigger/MTriggerPattern.h: - - added Reset function - - * mtrigger/MTriggerPatternDecode.[h,cc]: - - added using file format version number - - - - 2005/01/11 Markus Gaug - - * mbadpixels/MBadPixelsPix.cc - - updated documentation - - * mcalib/MCalibrationChargeCalc.cc - - make pixels with deviating number of phes unreliable instead of - unsuitable (this was already thought so, but missed to modify - at one place). - - * mhcalib/MHCalibrationCam.[h,cc] - - add possible flag 'kInterlaced': default: kFALSE (like before) - - added pointer to MRawEvtHeader to deny cosmics events in case - of 'interlaced' flag is set. No changes for 'normal' calibration - - - - 2005/01/10 Benjamin Riegel - - * mreport/MReportStarguider.cc, mreport/MReportStarguider.h - - added two classes for implementing starguider-data - - * mreport/ReportLinkDef.h - - added class MReportStarguider to be linked: - #pragma link C++ class MReportStarguider+; - - * mreport/Makefile - - added file MReportStarguider.cc - - * merpp.cc - - added two containers ( MReportStarguider, MTimeStarguider ) and - added MReportStarguider to the list: - w->AddContainer("MReportStarguider", "Starguider"); - w->AddContainer("MTimeStarguider", "Starguider"); - r->AddToList("MReportStarguider"); - - - - 2005/01/10 Markus Gaug - - * mcalib/MCalibColorSet.cc - - return kFALSE for CL-run instead of kTRUE - - * mcalib/MCalibrationChargeCalc.cc - - stop program in case that multiple colours are found in same file - without intensity calibration - - * mbadpixels/MBadPixelsPix.h - - added two new possible UnCalibrated_t flags for the hi-lo - calibration - - * macros/calibration.C - - add the calls to: - MArray::Class()->IgnoreTObjectStreamer(); - MParContainer::Class()->IgnoreTObjectStreamer(); - in main. - - * msignal/MExtractor.h - - added Getter for fOffsetLoGain (was still missing) - - * mhcalib/MHCalibrationChargeCam.[h,cc] - - remove pixels with histogram overflow only if their percentage - passes a certain limit (default: 0.5%). Before, every overflow - lead to an unsuitable pixel. - - * msignal/MExtractTimeAndChargeDigitalFilter.[h,cc] - - implemented changes suggested by T.B. to speed up calculations - - take fNameWeightsFile into the streamer, otherwise the Clone() - will always create an extractor with cosmic's weights. - - set fOffsetLoGain to a slighly higher value. The DF seems to - have a different offset since it uses different pulse shapes - and thus sightly different time definitions. - - - - 2005/01/10 Thomas Bretz - - * mhvstime/MHVsTime.cc: - - fixed a compiler error for gcc 2.95.3, see Mantis bug # 157 - - * callisto.cc: - - changed such, that the calculated pedestal is not random - anymore - - added code to calculate the pedestal also with randomization, - but this code is for the moment commented out. - - * callisto.rc: - - fixed naming of pedestal calculation - - * mbadpixels/MBadPixelsCalc.cc: - - added a second check which compares the pedestal rms with - the variance of the pedestal rms in the same sector - - * mjobs/MJCalibrateSignal.[h,cc]: - - changed to calculate the pedestal from extractor without - randomization - - added code to calculate the pedestal also with randomization, - but this code is for the moment commented out. - - * mjobs/MJCalibration.cc: - - made sure that pedcam always has the correct name - (FIXME? Print a warning if it has the wrong name) - - * mjobs/MJPedestal.[h,cc]: - - changed such, that it allows the calculation of pedestals - in three different ways (fundamental, fromextractor, - fromextractorrndm) - - therefor removed SetExtractorResolution and added - + void SetExtractionFundamental() - + void SetExtractionWithExtractorRndm() - + void SetExtractionWithExtractor() - - * mjobs/MJStar.cc: - - changed/fixed the input name of the MPedPhotCam used in the - image cleaning - - * mraw/MRawFileRead.[h,cc]: - - changed return type of OpenNextFile - - in some cases return kERROR in OpenNextFile to abort the Processing - with an error - - * mraw/MRawRunHeader.cc: - - call a wrong file format version ERROR now - - * mhflux/MAlphaFitter.[h,cc]: - - make sure that resetted values are returned if fit failed - - set default scaling too kOffRegion - - * mhflux/MHAlpha.cc: - - some small fixes to handling of MHAlphaOff - - * mhflux/MHFalseSource.[h,cc]: - - implemented possible usage of MHFalsSourceOff for On-Off-Analysis - - updated display accordingly - - updated fit accordingly - - removed catalog temporarily from plots until I found the - reason for the strange crashes - - * mbadpixels/MBadPixelCalc.[h,cc]: - - implemented the possibility to check the pedestal rms against the - variance of the pedstal rms, too. The option is curretly switched - off. - - enahanced informal output in PreProcess - - * mbase/MTaskList.cc: - - a little change to some output - - - - 2005/01/10 Wolfgang Wittek - - * mfbase/MFEventSelector2.cc - - check whether filter exists before calling - filter->CallPreProcess(parlist) - - - - 2005/01/08 Markus Gaug - - * mhcalib/MHCalibrationHiLoCam.[h,cc] - * mcalib/MCalibrationHiLoCam.[h,cc] - * mcalib/MCalibrationHiLoPix.[h,cc] - * mcalib/MIntensityCalibrationHiLoCam.[h,cc] - * mhcalib/Makefile, mcalib/Makefile, mhcalib/HCalibLinkDef.h, - mcalib/CalibLinkDef.h - - new classes for calibration of conversion high-gain vs. low-gain - - * msignal/MExtractedSignalPix.[h,cc] - - added data member fChisquare, set to -1. by Clear() and Reset() - - raised version number by 1 - - * msignal/MExtractedSignalCam.[h,cc] - - added data member fNdf, set to -1 by default - - new function: GetProb(const Int_t pixidx) to be called to - calculate the joint probability of Chisquare of pixel "pixidx" - and fNdf - - added documentation of data members - - raised version number by 1 - - * mhcalib/MHCalibrationChargeCam.cc - - strengthened default histogram limits a bit, should accelerate - the calibration by 20%. - - * mjobs/MJCalibrateSignalFromOutside.cc - - fixed two lines to compile MCalibrateData with the recent changes - by TB - - * msignal/MExtractTimeAndChargeDigitalFilter.cc - - fixed two bugs introduced yesterday by TB. - - * msignal/MExtractTimeAndChargeSpline.cc - * msignal/MExtractTimeAndChargeSlidingWindow.cc - - adopt part of TB's speed accelerations into these classes - - * msignal/MExtractTimeAndCharge.cc - - fix the low-gain extraction window for the case that the high-gain - is saturated. Was skipped so far. - - - - 2005/01/07 Markus Gaug - - * msignal/MExtractFixedWindowPeakSearch.[h,cc] - - catch the case that more than 90% of the pixels have saturated - signals and fix the extraction window from the occurrance of - saturation, then. Important for high-intensity calibration events. - - - * msignal/MExtractor.cc - * msignal/MExtractTime.cc - * msignal/MExtractTimeAndCharge.cc - - added some documentation - - * msignal/MExtractTime.[h,cc] - - moved the empty function FindTimeHiGain() and FindTimeLoGain() to - the header-file. - - - - - 2005/01/07 Abelardo Moralejo - - * mbase/MLog.h - - Added #include "TSystem.h", otherwise gSystem is not recognized - in Mac OSX. - - * manalysis/MMakePadHistograms.cc - - Changed badcalc.SetNamePedPhotContainer to - badcalc.SetNamePedPhotCam - - - - 2005/01/07 Thomas Bretz - - * mbadpixels/MBadPixelsCalc.[h,cc], macros/ONOFFAnalaysis.C: - - replaced PedPhotContainer by PedPhotCam for consistency - - * mbase/MLog.[h,cc]: - - return *this in Seperator() - - * mbase/MPrint.[h,cc]: - - use new separator manipulator in PreProcess - - fixed a type: separator instead of seperator - - * mfileio/MReadTree.[h,cc]: - - added a check for branch->IsAutoDelete() in Notify() - - * mpedestal/MExtractPedestal.[h,cc]: - - added new option 'fRandomCalculation' be used to switch on-/off- - randomization in extractors, the default should be like before - - added Process() calling Calc() - - * mpedestal/MPedCalcFromLoGain.[h,cc], mpedestal/MPedCalcPedRun.[h,cc]: - - renamed Process() to Calc() - - * Makefile: - - removed macros/calibration.C, which seems to have been - unintantionally introduced. - - * manalysis/Makefile: - - removed unintantionally introduced wrong include - - * msignal/MExtractTimeAndChargeDigitalFilter.cc: - - a small acceleration discussed with Hendrik by replacing a - counter in a loop by pointer arithmetics - - * mraw/MRawEvtPixelIter.cc: - - fixed a bug in GetMaxIdxHiLoGain which caused the loop to - read one byte behind the end of the array - - fixed HasLoGain() which really did weired things, means accessing - sometimes memory somewhere. This could theoretically result - in assigning the wrong lo-gains to the wrong pixels. - - * mtrigger/MTriggerPattern.[h,cc], mtrigger/MTriggerPatternDecode.[h,cc], - mtrigger/MFTriggerPattern.[h,cc]: - - added - - * mtrigger/Makefile, mtrigger/TriggerLinkDef.h: - - added MTriggerPattern, MTriggerPatternDecode and MFTriggerPattern - - * manalysis/MEnergyEstParam.h: - - added a new function SetVariables calling SetCoeff - - * mcalib/MCalibrateData.[h,cc]: - - removed data members for container names - - added new lists for container names - - allow to calibrate more than one pedestal container at the same - time - - * mjobs/MJCalibrateSignal.cc: - - changed accordingly - - - - 2005/01/05 Thomas Bretz - - * mcalib/MCalibrationBlindPix.cc, mcalib/MCalibrationChargeCalc.cc, - mhcalib/MHCalibrationRelTimeCam.cc: - - made some output lines fit into convinience window of 80 col - - * mhist/MHCamEvent.cc: - - make sure that x-axis has correct title - - * msignal/MArrivalTimePix.cc: - - init error to -1 which is a obviously non valid value - - fixed IsValid() which gave wrong results - - * msignal/MExtractTimeAndCharge.cc, msignal/MExtractedSignalPix.cc: - - made sure that LoGain is flagged non-valid if no lo-gain exists - - push time back at the edge of the allowed limits if outside - - * mbase/MGList.[h,cc]: - - introduced new functions Delete and DeletePictures - - SetBit(kMustCleanup) in constructor. Otherwise it is not - correctly removed from ListOfCleanups - - * mbase/MLog.cc: - - SetBit(kMustCleanup) if adding a plugin to make sure it is cleaned - from the list - - * mbase/MParContainer.[h,cc]: - - replaced return type of GetDescriptor by TString. The old version - was terribly wrong! The returned memory wasn't removed as soon - as the function returned. - - * mbase/MStatusDisplay.[h,cc]: - - for security (thread safty) replaced all Form() by MString::Form() - - implemented a more secure scheme of Closing (Clone()) this was - a hint given by valgrind - - set kMustCleanup for all new object in ClonePad not only kCanDelete - - fixed some lines in pulldown-menus - - add TPads to ListOfCleanups in ClonePad (workaround!) - - * mbase/MString.[h,cc]: - - implemented a new static Form() function returning a copy of - the result - - * mbase/MTask.[h,cc]: - - replaced return type of GetDescriptor by TString. The old version - was terribly wrong! The returned memory wasn't removed as soon - as the function returned. - - Made GetDescriptor thread safe using MString::Form - - * mfileio/MWriteRootFile.cc: - - Use GetDescriptor().Data() when using any kind of printf function - - * mhbase/MFillH.cc: - - replaced string concatenation in all constructors by a Form - (also suggested by valgrind) - - * mhcalib/MHCalibrationRelTimeCam.cc: - - made some output fit into 80col boundary - - - - - 2005/01/03 Thomas Bretz (HAPPY NEW YEAR) - - * mfht: - - added new directory for hexagonal fourier transformation - - * mfht/HftIncl.h, mhft/HftLinkDef.h, mhft/MGeomCamMagicXT.[h,cc], - mhft/MGeomCamMagicEnhance.[h,cc], mhft/MHexgaonalFT.[h,cc], - mhft/MHexagonalFreqSpace.[h,cc], mhft/MHexagonalFTCalc.[h,cc], - mhft/Makefile: - - added - - * macros/extendcam.C: - - added: tutorial for MGeomCamExtend - - * macros/hft.C: - - added: tutorial for MHexgonalFTCalc - - * macros/dohtml.C: - - updated - - * macros/rootlogon.C: - - updated - - * Makefile: - - mhft added - - * mbase/MParContainer.cc, mbase/MLog.cc: - - added a pre-compiler option for destructor debugging - - * mbase/MTaskList.[h,cc]: - - added new function Replace - - * mdata/MDataChain.cc, mfbase/MF.cc: - - shortened some output - - * mdata/MDataArray.[h,cc]: - - added new function FindRule - - * mfileio/MReadTree.[h,cc]: - - enhanced functionality to be able to read a TTree stored in memory - instead of a file. Therefor introduced fTree which is now the pointer - used and replaced fChain where TTree and TChain have common behaviour. - Where they behave uncommon new code for the new case has been added. - - * mfileio/MWriteRootFile.[h,cc]: - - enhanced functionality to be able to write a TTree into memory - instead of a file. This were maily bugfixes for the case fOut==0, which - must be handled correctly. Becarefull a tree filles without a file - is not deleted automatically! - - * mhbase/MBinning.h: - - added copy constructor - - fixed buggy SetEdges(MBinning&) which didn't work - - * mhbase/MHMatrix.cc: - - when adding a new rule check first if the same rule already exists - - * mhflux/MAlphaFitter.[h,cc]: - - added new functionality to support on-off analysis - - didn't touch existing code - - * mhflux/MHAlpha.[h,cc]: - - added new functionality to support on-off analysis - - replaced Fit() calls by newer function calls - - added DrawAll - PRELIMINARY - - fixed a bug when projecting - may be the reson for some strange - crashes - - * mcalib/MCalibColorSet.cc: - - fixed a stupid bug introduced last year, which caused MCalibColorSet - in some circumstances to stop the eventloop when it shouldn't - - * mjobs/MSequence.cc: - - expand path names -