source: trunk/FACT++/scripts/Main.js

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @17924   10 years tbretz Reverting to last revision.
(edit) @17922   10 years tbretz Added EVENT_SERVER and SQM_CONTROL; fixed a typo; close lid at startup.
(edit) @17673   11 years tbretz Adapted to have three agilentctrl running instead of one.
(edit) @17638   11 years tbretz Allow ir interruption during ovtest, updated shutdown message.
(edit) @17538   11 years tbretz It is not always necesary to stop the feedback anymore; get some more ...
(edit) @17403   11 years tbretz Only park telescope during ovtest when it is deep dark time.
(edit) @17356   11 years tbretz Switch trigger off before lid is closed to avoid smartfact ...
(edit) @17324   11 years tbretz Changed file format to zFits; do not require all pixels to be at the ...
(edit) @17190   11 years tbretz Adapted script to new feedback states, take the slower ramping into ...
(edit) @17179   11 years tbretz Reverting to last revision.
(edit) @17174   11 years tbretz Some minor updates and a bug fix in the format of the NOMINAL service.
(edit) @17031   11 years tbretz Could not take single-pe runs when drive system was locked; ...
(edit) @17028   11 years tbretz Updated to the recent changes in the feedback (still untested)
(edit) @17014   11 years tbretz Take 10,000 events of type single-pe as single-pe run.
(edit) @16864   12 years tbretz Fixed the twilight check
(edit) @16858   12 years tbretz Fixed a typo: Should be var, not int
(edit) @16853   12 years tbretz Replaced some console.out by dim.log; take only 1min runs during ...
(edit) @16841   12 years tbretz Added the possibility to interrupt the script peacefully; changed to ...
(edit) @16798   12 years tbretz Reoragnized the logging output, to get closer to a final version ...
(edit) @16533   12 years tbretz Renamed WritingData of fadctrl to RunInProgress
(edit) @16441   12 years tbretz Some updates to the output; added a timeout when waiting for the ...
(edit) @16077   12 years tbretz Removed the 'last measurement must be a SHUTDOWN' check. This is not ...
(edit) @16051   12 years tbretz Moved AGILENT_CONTROL back in place.
(edit) @16049   12 years tbretz Moved some code around data taking (automatic reconnect etc) to ...
(edit) @15482   12 years tbretz Fixed a typo obs->sub
(edit) @15480   12 years tbretz A small fix in the shutdown procedure. If we disconnect the bias crate ...
(edit) @15466   12 years tbretz Made sure that if we do a re-connect during configure all servers are ...
(edit) @15454   12 years tbretz Fixed a crash in the startup information print in case there is no ...
(edit) @15411   12 years tbretz Removed obsolete FAD_CONTROL/STATISTICS2 and fixed a problem with the ...
(edit) @15378   12 years tbretz Some cleanup; do repeat configuration re-connects only three times; do ...
(edit) @15362   12 years tbretz Set the sunhorizon to -12deg; implemented automatic reconnect; ...
(edit) @15354   12 years tbretz improved the handling of fad losses; removed AGILENT_CONTROL ...
(edit) @15293   12 years tbretz Added a check for schedule-database
(edit) @15291   12 years tbretz Read the schedule from the database instead of the file directly. The ...
(edit) @15289   12 years tbretz Improved the code to handle the INCOMPLETE message, added some code to ...
(edit) @15284   12 years tbretz Moved getTimeSinceLastDrsCalib to its own function; added automatic ...
(edit) @15270   12 years tbretz Restructured the code.
(edit) @15252   12 years tbretz Unified the checkState during data taking; improved some log-output; ...
(edit) @15146   12 years tbretz Catch the timeout when a run is started and check for FAD loss; ...
(edit) @15137   12 years tbretz Reoragnized and improved the output; instead of just waiting for the ...
(edit) @15117   12 years tbretz Moved reading of the schedule to the beginning of the file so that ...
(edit) @15098   12 years tbretz Improved and compacted output; disable feedback while voltage should ...
(edit) @15030   12 years tbretz Also reset the rate control state after the single-pe run.
(edit) @15026   12 years tbretz Updated the ratescan part.
(edit) @15016   12 years tbretz Improved output.
(edit) @15007   12 years tbretz Added some output before the main loop to simplify detection of wrong ...
(edit) @15005   12 years tbretz Implemented alternating wobble positions.
(edit) @14998   12 years tbretz Worked around the problem that sometimes (reason still to be found) ...
(edit) @14973   12 years tbretz Send a STOP to the rate control after the DRS calibration to get it ...
(edit) @14886   12 years neise finally checking in the typo I found weeks ago. The typo caused no ...
(edit) @14775   12 years neise added SET_FILE_FORMAT 2 hack into RATESCAN section
(edit) @14774   12 years neise non existent member Observation.utc was used in line 461. changed it ...
(edit) @14773   12 years neise edited Shutdown to actually do something
(edit) @14772   12 years neise two typos
(edit) @14771   12 years neise changed OpenLid to wait instead of exit in case of too early
(edit) @14769   12 years neise moved the schedule out of Main.js so it is easier for the shifter to ...
(edit) @14767   12 years neise added some comments containing questions, ideas and remarks
(edit) @14766   12 years neise added inclusion of Observation_class.js in this file - was forgotten before
(edit) @14765   12 years neise introduced new class to generate the schedule - called Observation. ...
(edit) @14764   12 years neise one can put now RATESCANs into the observation variable. I changed the ...
(add) @14763   12 years neise initial include
Note: See TracRevisionLog for help on using the revision log.