source: trunk/FACT++/scripts

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @17031   11 years tbretz Could not take single-pe runs when drive system was locked; ...
(edit) @17028   11 years tbretz Updated to the recent changes in the feedback (still untested)
(edit) @17016   11 years tbretz Implemented an automatic crate reset in the case the fdactrl is still ...
(edit) @17015   11 years tbretz Try to handle NotReady
(edit) @17014   11 years tbretz Take 10,000 events of type single-pe as single-pe run.
(edit) @17013   11 years tbretz
(edit) @17012   11 years tbretz Move code to crateReset.js to be able to access that also from Main.js
(edit) @16995   11 years tbretz Changed the order of the fad and the fsc
(edit) @16994   11 years tbretz Fixed a typo
(edit) @16993   11 years tbretz We are not waiting for Idle anymore but Valid instead.
(edit) @16883   11 years tbretz Fixed two typos.
(edit) @16875   11 years tbretz Fixed an issue with the detection of the 'camera' argument.
(edit) @16874   11 years tbretz Direct the output in case of wrong states to the dim log.
(edit) @16864   11 years tbretz Fixed the twilight check
(edit) @16861   11 years tbretz Indentation cosmetics.
(edit) @16860   11 years tbretz Added 'use strict'
(edit) @16859   11 years tbretz Added 'use strict'
(edit) @16858   11 years tbretz Fixed a typo: Should be var, not int
(edit) @16857   11 years tbretz Added the 'use strict'
(edit) @16853   11 years tbretz Replaced some console.out by dim.log; take only 1min runs during ...
(edit) @16852   11 years tbretz Some changes to the output, replaced some console.out by dim.log
(edit) @16851   11 years tbretz Changed underflow level from 650 to 600; replaced some console.out by ...
(edit) @16842   11 years tbretz Updated some output.
(edit) @16841   11 years tbretz Added the possibility to interrupt the script peacefully; changed to ...
(edit) @16839   11 years tbretz Some updates on the output; removed an obsolete wait for MCP Idle.
(edit) @16838   11 years tbretz Try a CLOSE, if the LID is in the state 'Unknown' - might still need ...
(edit) @16829   11 years tbretz Updated.
(edit) @16828   11 years tbretz In Configured2 we do just wait.
(edit) @16827   11 years tbretz Make sure all boards are connected.
(edit) @16804   11 years tbretz Updated the description of setInterruptHandler and added triggerInterrupt
(edit) @16798   11 years tbretz Reoragnized the logging output, to get closer to a final version ...
(edit) @16797   11 years tbretz Improved output when a command is sent.
(edit) @16796   11 years tbretz Wait for ftmctrl to be in Valid not Idle; changed the level to detect ...
(edit) @16795   11 years tbretz Added Configuring3 state; improved output whena command is sent:
(edit) @16794   11 years tbretz output some information so that it is aparent which FTU gives the problem.
(edit) @16793   11 years tbretz Fixed a problem with the 32bit shift operator when evaluating the ...
(edit) @16792   11 years tbretz There is not much we can do in Configured2 other than waiting for the ...
(edit) @16791   11 years tbretz Configured is now Configured1 and Configured2
(edit) @16790   11 years tbretz Added a chck for the clock conditioner; ftmctrl should now be in Valid ...
(edit) @16789   11 years tbretz Debugging output seems not needed anymore.
(edit) @16788   11 years tbretz
(edit) @16787   11 years tbretz Improved the output whenever a command is sent.
(edit) @16744   11 years tbretz Produce some more output in case the FADs don't got properly connected.
(edit) @16743   11 years tbretz Use the QoS (num open files) of the RUNS service to detect whether a ...
(edit) @16571   11 years tbretz Make sure that no run-file is open (this gives quite some probability ...
(edit) @16570   11 years tbretz We have to check for the MCP state, too, to make sure that the state ...
(edit) @16533   12 years tbretz Renamed WritingData of fadctrl to RunInProgress
(edit) @16448   12 years tbretz Fixed a typo and added DimNetworkNotAvailable.
(edit) @16447   12 years tbretz Added time to output -- to be further improved.
(edit) @16441   12 years tbretz Some updates to the output; added a timeout when waiting for the ...
(edit) @16386   12 years tbretz Also send a CLOSE_OPEN_FILES
(edit) @16385   12 years tbretz Theoretically, the fadctrl can also hang in Configuring1 because that ...
(edit) @16384   12 years tbretz Some improvements switching on the drive cabinet.
(edit) @16102   12 years tbretz Added a user supplied 'this' argument to v8.timeout and the Thread class.
(edit) @16099   12 years tbretz Skip the message in the log stream.
(edit) @16098   12 years tbretz For the event the descriptions are needed.
(edit) @16078   12 years tbretz Improved the calculation of the date for loading the DRS calib. This ...
(edit) @16077   12 years tbretz Removed the 'last measurement must be a SHUTDOWN' check. This is not ...
(edit) @16076   12 years tbretz Only print a warning if drive is locked.
(edit) @16075   12 years tbretz Take agilentctrl back into the list of checked states; added Locked ...
(edit) @16074   12 years tbretz Allow for observation types singlepe, drscalib and idle.
(edit) @16071   12 years tbretz Added console.warn to print a highlighted message to the ocnsole.
(edit) @16060   12 years tbretz Code from Main.js related to taking a run including the solution for ...
(edit) @16053   12 years tbretz Added some note...
(edit) @16052   12 years tbretz Handle the case NoConnection
(edit) @16051   12 years tbretz Moved AGILENT_CONTROL back in place.
(edit) @16050   12 years tbretz Make use of takeRun.js to 'fix' FAD problems also during the test run ...
(edit) @16049   12 years tbretz Moved some code around data taking (automatic reconnect etc) to ...
(edit) @15482   12 years tbretz Fixed a typo obs->sub
(edit) @15480   12 years tbretz A small fix in the shutdown procedure. If we disconnect the bias crate ...
(edit) @15466   12 years tbretz Made sure that if we do a re-connect during configure all servers are ...
(edit) @15455   12 years tbretz Added dimctrl.setInterruptHandler
(edit) @15454   12 years tbretz Fixed a crash in the startup information print in case there is no ...
(edit) @15411   12 years tbretz Removed obsolete FAD_CONTROL/STATISTICS2 and fixed a problem with the ...
(edit) @15378   12 years tbretz Some cleanup; do repeat configuration re-connects only three times; do ...
(edit) @15362   12 years tbretz Set the sunhorizon to -12deg; implemented automatic reconnect; ...
(edit) @15359   12 years tbretz Fixed a typo and correctly document subject as constant
(edit) @15358   12 years tbretz Added description for class index; changed from class to namespace
(edit) @15357   12 years tbretz An important dot was missing ;)
(edit) @15354   12 years tbretz improved the handling of fad losses; removed AGILENT_CONTROL ...
(edit) @15353   12 years tbretz Added TEMPERATURE to the required servers, removed AGILENT_CONTROL ...
(edit) @15352   12 years tbretz Added 'now' as a a valid time.
(edit) @15296   12 years tbretz Fixed a typo in a command.
(edit) @15293   12 years tbretz Added a check for schedule-database
(edit) @15292   12 years tbretz Function to retrieve schedule from database
(edit) @15291   12 years tbretz Read the schedule from the database instead of the file directly. The ...
(edit) @15290   12 years tbretz Copy of the classical version directly reading the schedule from a file.
(edit) @15289   12 years tbretz Improved the code to handle the INCOMPLETE message, added some code to ...
(edit) @15288   12 years tbretz Copy property id if available -- needed to read the schedule from the db.
(edit) @15284   12 years tbretz Moved getTimeSinceLastDrsCalib to its own function; added automatic ...
(edit) @15275   12 years tbretz Fixed a typo.
(edit) @15274   12 years tbretz Fixed a typo... the class name is Mail not Sky
(edit) @15273   12 years tbretz Added explanation for new magic variables.
(edit) @15270   12 years tbretz Restructured the code.
(edit) @15252   12 years tbretz Unified the checkState during data taking; improved some log-output; ...
(edit) @15172   12 years tbretz Changed the Mail class a bit to have the arrays as data members ReadOnly.
(edit) @15162   12 years tbretz Allow the datalogger also to be in Logging. It just means that the ...
(edit) @15161   12 years tbretz Request 15 seconds of data for the underflow check. As soon as the ...
(edit) @15152   12 years tbretz Added desription for String.count
(edit) @15151   12 years tbretz Updated dim.wait description.
Note: See TracRevisionLog for help on using the revision log.