source: trunk/FACT++/scripts

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @20099   4 years tbretz Adapted to the new command for reset.
(edit) @20098   4 years tbretz Thread can not be killed anymore - new way to stop.
(edit) @20082   4 years tbretz Trying to setup to use the new miniftm for fad reset.
(edit) @19931   5 years tbretz Added missing parenthesis.
(edit) @19930   5 years tbretz Added GUDE_CONTROL as a requirement.
(edit) @19919   5 years tbretz This script is FACT specific for now. Added a safety check that the ...
(edit) @19709   5 years tbretz Added new GTC dust.
(edit) @19699   5 years tbretz Typo
(edit) @19581   5 years tbretz Fixed a race condition (as this.ok was set before the output, the ...
(edit) @19573   5 years tbretz An explicit reload sources is not needed anymore in GRB mode instead ...
(edit) @19531   6 years tbretz No special handling for PREPARE required.
(edit) @19517   6 years tbretz Fixed a problem with the prpare-interrupt and load sources, fixed ...
(edit) @19514   6 years tbretz Taking 20 1min runs makes it more consistent with the first wobble ...
(edit) @19513   6 years tbretz New interrupt 'PREPARE' which reloads the sources and stops the drive ...
(edit) @19512   6 years tbretz Added the nodrs and the grb flag.
(edit) @19511   6 years tbretz The status 'UpperClosing' was unhandled.
(edit) @19510   6 years tbretz Takes care of the scheduler status.
(edit) @19509   6 years tbretz Enable scheduler during startup.
(edit) @19466   6 years tbretz Opening wasn't handled.
(edit) @19465   6 years tbretz Made waiting time for possible bias ramping consistent with Main.js.
(edit) @19463   6 years tbretz Was missing
(edit) @19462   6 years tbretz Was missing
(edit) @19461   6 years tbretz Was missing
(edit) @19460   6 years tbretz Was missing.
(edit) @19452   6 years tbretz This implements changes which are required for follow-up observations. ...
(edit) @19014   7 years tbretz Require the rainsensorinformation.
(edit) @18965   7 years tbretz Fixed a typo in a comment
(edit) @18948   7 years tbretz Fixed a typo.
(edit) @18923   7 years tbretz Implemented a new interrupt ('ReloadSources') to trigger reloading ...
(edit) @18914   7 years tbretz Added BIAS_TEMP to checks.
(edit) @18905   7 years dneise Remove SQM_CONTROL check in Startup, since the device is broken.
(edit) @18904   7 years dneise increase timeout to 30sec, just to make sure it is not too short, ...
(edit) @18903   7 years dneise Setting startup Handler loop timeouts to 5000ms. We saw endless loops ...
(edit) @18900   7 years dneise hack to allow for data taking while agilent not available, done ...
(edit) @18899   7 years dneise hack to allow for data taking while agilent not available, AND new Lid ...
(edit) @18898   7 years dneise hack to allow for data taking while agilent not available, done ...
(edit) @18829   8 years tbretz Updated with the latest changes in the astromtry interface of the ...
(edit) @18819   8 years tbretz Improved comments, removed wrong 'version' property
(edit) @18816   8 years tbretz Fixed a typo in a comment.
(edit) @18735   8 years dneise revertinglid hacks regarding reasonable states for Lid_CONTROL: also ...
(edit) @18731   8 years tbretz Implemented the possibility to define a custom setup in a callback ...
(edit) @18730   8 years tbretz Replaces the 'sleep' keyword by 'unlock' for the shutdown to get a ...
(edit) @18719   8 years tbretz Cosmetics in the ORDER BY clause, added ASC to be more precise.
(edit) @18715   8 years tbretz Implemented the suspend/resume feature. Everything after a suspend is ...
(edit) @18714   8 years tbretz Improved the partially wrong error messages, made them more ...
(edit) @18713   8 years tbretz The conversion key to name is now done directly with the query by ...
(edit) @18651   8 years tbretz That was the wrong order. First use sub then increment.
(edit) @18649   8 years tbretz It seems the camera reponse has more than one LF now... replace all of ...
(edit) @18516   8 years smueller remove closed lid data run, decided in telcon 25 June 2016.
(edit) @18515   8 years smueller the production code needs to be checked in
(edit) @18486   9 years tbretz
(edit) @18430   9 years tbretz Copy properties for orbit mode.
(edit) @18429   9 years tbretz Preliminary implementation of wobble mode; turn off IR camera LEDs ...
(edit) @18427   9 years tbretz
(edit) @18396   9 years Daniela Dorner changed state from Armed to Initialized
(edit) @18381   9 years Daniela Dorner adapted to new drivectrl
(edit) @18372   9 years tbretz Adapted drive control states.
(edit) @18370   9 years tbretz Adapted handling of drive control states.
(edit) @18369   9 years tbretz Adapted drive control states.
(edit) @18283   9 years smueller added the update schedule script for manual schedule injection
(edit) @18265   9 years dneise fixed bug described in www.fact-project.org/logbook/showthread.php?tid=3382
(edit) @18220   9 years dneise Don't know what these modifications are for, but they are really old. ...
(edit) @18219   9 years dneise resetting Configure before crate reset
(edit) @18218   9 years dneise introduced PFMINI_CONTROL to startup check
(edit) @18217   9 years dneise increased timeout, to cope for failing html parsing.
(edit) @18216   9 years tbretz Changed timeout for bias crate diconnect and toggling drive power to ...
(edit) @18176   10 years dneise increased timeout of waiting for DriveOff, took 5 seconds once.
(edit) @18174   10 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18173   10 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18172   10 years dneise Also this file has been changed by Daniela Dorner in February, while ...
(edit) @18171   10 years dneise renamed some variables
(edit) @18170   10 years dneise As discussed in the last telcon on 14.04.15, I implemented a new ...
(edit) @18169   10 years dneise on 21. or 22.02.15 Daniela Dorner made this modification. Since it's ...
(edit) @18128   10 years tbretz Added the possibility to start a custom run.
(edit) @18114   10 years tbretz Added SLEEP task which is a shutdown without locking the drive and ...
(edit) @18113   10 years tbretz Added sleep as valid observation.
(edit) @18112   10 years tbretz Fixed a typo in a log text.
(edit) @18111   10 years tbretz Added SLEEP as new measurment type.
(edit) @18110   10 years tbretz Fixed a typo in a log-text.
(edit) @18085   10 years Daniela Dorner implemented new ratescan types
(edit) @18047   10 years Daniela Dorner added RATESCAN2
(edit) @18046   10 years Daniela Dorner added checks for new options, fixed bug in ra/dec check
(edit) @18016   10 years dneise initial commit of script, to take a closed lid ratescan
(edit) @17927   10 years tbretz Added a timeout to checkStates
(edit) @17926   10 years tbretz Added handling for Critical and OnStandby status of feedback.
(edit) @17925   10 years tbretz Reverting to last revision.
(edit) @17924   10 years tbretz Reverting to last revision.
(edit) @17923   10 years tbretz Reverting to last revision.
(edit) @17922   10 years tbretz Added EVENT_SERVER and SQM_CONTROL; fixed a typo; close lid at startup.
(edit) @17921   10 years tbretz Added a timeout for checkStates
(edit) @17920   10 years tbretz Added NotReady and Ready
(edit) @17919   10 years tbretz Added OnStandby, Warning and Critical.
(edit) @17673   11 years tbretz Adapted to have three agilentctrl running instead of one.
(edit) @17659   11 years tbretz Output when the MCP/STOP command has been sent.
(edit) @17638   11 years tbretz Allow ir interruption during ovtest, updated shutdown message.
(edit) @17637   11 years tbretz Catch when a DRS calibration could not be restored.
(edit) @17538   11 years tbretz It is not always necesary to stop the feedback anymore; get some more ...
(edit) @17537   11 years tbretz Added Locked state to the list of handled states.
(edit) @17536   11 years tbretz Added PowerProblem to the list of handled states.
(edit) @17535   11 years tbretz Stop trigger if trigger is on. Fixed a wrong call of get() in a timeout
Note: See TracRevisionLog for help on using the revision log.