source: trunk/FACT++/src

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13259   13 years tbretz Set fDebugTx per default to false
(edit) @13258   13 years tbretz Ensure that after a successfull overcurrent reset at least one status ...
(edit) @13257   13 years tbretz Changed the description for the exit command.
(edit) @13256   13 years tbretz Set names for the dim services.
(edit) @13255   13 years tbretz Changed the resistance of the broken pixels to 390Ohm. Test yesterday ...
(edit) @13252   13 years tbretz Fixed a typo.
(edit) @13251   13 years tbretz Encapsulated the waiting for a state into proper switching off and on ...
(edit) @13249   13 years tbretz Fixed the 'broken pixel' correction. The voltage was devided by the ...
(edit) @13242   13 years tbretz Updated some log-output.
(edit) @13241   13 years tbretz Added another sanity check for the output.
(edit) @13240   13 years tbretz Added a sanity check for the new output
(edit) @13239   13 years tbretz Propagate G-APD bias offset and set-point seperately.
(edit) @13238   13 years tbretz Updated to new biasctrl commands; removed some obsolete endl; reduced ...
(edit) @13236   13 years tbretz Changed the code in a way that now it operates on floating point ...
(edit) @13235   13 years tbretz Decreased the serial resistance from 1150 Ohm to 1100 Ohm; fixed a ...
(edit) @13224   13 years tbretz Made the number of requests during calibration an option.
(edit) @13223   13 years tbretz Unintentionally changed the allowed states for TRACK_SOURCE with the ...
(edit) @13222   13 years tbretz Replaced W format by C for TRACK_SOURCE
(edit) @13221   13 years tbretz Added TrimQuotes
(edit) @13220   13 years tbretz Improved debugging output.
(edit) @13217   13 years tbretz Some improved debug output.
(edit) @13216   13 years tbretz Updated some FITS descriptions.
(edit) @13212   13 years tbretz Updated state names.
(edit) @13211   13 years tbretz Improves state handling.
(edit) @13210   13 years tbretz Removed all the unnecessary log-messages.
(edit) @13209   13 years tbretz Implemented fVerbose to switch verbosity of default messages on and off.
(edit) @13208   13 years tbretz Write comments as such.
(edit) @13207   13 years tbretz Addeda new log-class: comments
(edit) @13206   13 years tbretz Pipe comments to the log-file; added the missing jump label.
(edit) @13205   13 years lyard added fence from prevent column desc of messages services
(edit) @13204   13 years lyard added output to see which service creates column warning
(edit) @13203   13 years tbretz Updated the options.
(edit) @13202   13 years tbretz Updated the help text.
(edit) @13201   13 years tbretz Made DebugTx optional.
(edit) @13200   13 years tbretz Use Debug() when fDebugTx is enabled.
(edit) @13197   13 years tbretz Shortened some dim descriptions.
(edit) @13196   13 years tbretz Shortened some dim descriptions.
(edit) @13195   13 years tbretz Shortened descriptions to make the datalogger more happy.
(edit) @13194   13 years tbretz Updated some dim descriptions; suppress unecessary output by default.
(edit) @13193   13 years tbretz Print AddService info only when it is really a service.
(edit) @13192   13 years tbretz Some improvement to header evaluation.
(edit) @13191   13 years tbretz Changed the default interval from 55s to 25s. Made it an option.
(edit) @13190   13 years tbretz Propagate max number of events and time correctly as signed int.
(edit) @13189   13 years tbretz Delay setting new volatges during current requests.
(edit) @13179   13 years tbretz Updated help text for '.s'
(edit) @13178   13 years tbretz Send current requests in current control mode only when voltage is ...
(edit) @13170   13 years tbretz Added checks for the consistency of the event and trigger number.
(edit) @13169   13 years tbretz Improved some debug output, removed obsolete SetMode; commented out ...
(edit) @13168   13 years tbretz Implemented a function for word wraping
(edit) @13167   13 years tbretz Moved read to cc file; implemented first version of a database interface.
(edit) @13166   13 years tbretz Make sure that the connection is the last in the configuration; ...
(edit) @13165   13 years tbretz Added some improved output.
(edit) @13164   13 years tbretz Implemented new command to set all offsets individually (for current ...
(edit) @13163   13 years tbretz Replaces all 416 by kNumChannels; send the correct command to set the ...
(edit) @13160   13 years tbretz Some clean up to the commands.
(edit) @13159   13 years tbretz Assume that an empty folder name means '.'
(edit) @13138   13 years tbretz Implemented request of current sttaus during current feedback once in ...
(edit) @13137   13 years tbretz Ensure that the calibration starts now that the biasctrl doesn't sent ...
(edit) @13136   13 years tbretz Made sure that the first automatic status request at connection also ...
(edit) @13134   13 years tbretz Added a warning message to help debugging.
(edit) @13116   13 years tbretz Do only request the status if the voltage is on; get some dummy ...
(edit) @13109   13 years tbretz Removed default for device address; only connect automatically if ...
(edit) @13092   13 years lyard removed useless annoying outputs
(edit) @13091   13 years tbretz Fixed the averaging implemented yest for more verbose output
(edit) @13083   13 years lyard added more verbosity
(edit) @13071   13 years tbretz Set the bias create resistor to 1150 Ohm which (according to the ...
(edit) @13070   13 years tbretz Do not send current request in HandleCalibration when still ramping.
(edit) @13068   13 years tbretz Removed some old debug output when commands are issued.
(edit) @13062   13 years tbretz Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial ...
(edit) @13060   13 years tbretz Implemented the possibility of a current feedback which corrects the ...
(edit) @13030   13 years tbretz Debugged a few issues like too long comments and a missing check.
(edit) @13007   13 years tbretz Mini change to the hep output.
(edit) @13006   13 years tbretz Reformated the output to make it better fit the help2man conversion.
(edit) @13005   13 years tbretz Added some debug options; moved the PrintHelp at a better position so ...
(edit) @12998   13 years tbretz Added out own FITS streamer to the list of possible file formats (5).
(edit) @12997   13 years tbretz Data writer using our own fits streamer class.
(edit) @12994   13 years tbretz Added the number of events to interpolate to the feedback commands; ...
(edit) @12993   13 years tbretz Fixed an issue with the console and shell selection.
(edit) @12991   13 years tbretz Added quality of service to Deviation
(edit) @12990   13 years tbretz Added dim service descriptions
(edit) @12989   13 years tbretz Replaces status==0 but 0x100-3 (ERROR) instead of 99, leading to a ...
(edit) @12967   13 years tbretz Fixed some trivial compiler warnings.
(edit) @12965   13 years tbretz Added interpretation of 'WP' hoping that the interpretation to be the ...
(edit) @12964   13 years tbretz Now used the common Main::execute approach to launch the program; ...
(edit) @12963   13 years tbretz Print jumps and labels help text; use a MessageImp for output now.
(edit) @12962   13 years tbretz Print jumps and labels help text
(edit) @12961   13 years tbretz Implementd jumps and labels
(edit) @12960   13 years tbretz Flush the buffer before the boot message is printed.
(edit) @12959   13 years tbretz Fixed a compiler warning about an unused variable.
(edit) @12958   13 years tbretz Removed obsolete include of Time.h
(edit) @12957   13 years tbretz
(edit) @12956   13 years tbretz To dfine the virtual Run() function a new class MainImp is used now ...
(edit) @12955   13 years tbretz Added include of boost/version.hpp removed obsolete forward class ...
(edit) @12954   13 years tbretz Added include of LocalControl.h
(edit) @12943   13 years tbretz Implemented a root-mode which allows to use mathematical expressions ...
(edit) @12914   13 years tbretz Removed the zero trigger check for the time being.
(edit) @12913   13 years tbretz Do not stop immediately in case of zero triggers, wait until the ...
(edit) @12912   13 years tbretz Transfer precision to stream which is used for formattting
(edit) @12911   13 years tbretz Transfer precision to stream which is used for formattting
(edit) @12908   13 years tbretz Fixed a bug which caused crashes for runs without run-types, e.g. self ...
Note: See TracRevisionLog for help on using the revision log.