source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @17291   11 years lyard BugFixed fitsdump to display the correct num of rows also for ...
(edit) @17280   11 years tbretz When we take data (eg drs-pedestal) and the voltag eis off do not ...
(edit) @17279   11 years tbretz Fixed the ionice
(edit) @17278   11 years tbretz Updated the number of bytes in the DRS_RUN service.
(edit) @17276   11 years tbretz Set a catalog size which is reasonable for normal data taking / data ...
(edit) @17273   11 years tbretz Removed std:: from fits
(edit) @17272   11 years tbretz Added night to the end of the DRS_RUNS service.
(edit) @17271   11 years tbretz Added night to the DRS_RUNS service.
(edit) @17270   11 years tbretz Start fadctrl with a higher I/O priority.
(edit) @17266   11 years tbretz Removed the std:: from the fits classes.
(edit) @17259   11 years lyard added output of tables in a file for fitsdump
(edit) @17257   11 years tbretz Added button for ZFits
(edit) @17256   11 years tbretz Fixed some compiling issues.
(edit) @17252   11 years tbretz Changed the order of arguments to WriteFitsImp.
(edit) @17244   11 years tbretz Added new options and commands to configure file compression; added ...
(edit) @17238   11 years tbretz Using the new Queue implementation, all queued functions need to ...
(edit) @17236   11 years tbretz Using the new Queue implementation, all queued functions need to ...
(edit) @17235   11 years tbretz Some changes to limits: An alarm is now posted if the difference ...
(edit) @17234   11 years tbretz So far the assumption was that the precise one is the DAC, but (most ...
(edit) @17233   11 years tbretz Get the last available drs calibration to initialize the ...
(edit) @17232   11 years tbretz Give the night to DrsCalibration::WriteFitsImp
(edit) @17231   11 years tbretz Moved the implementation of the output file from a data memember to a ...
(edit) @17230   11 years tbretz Use Queue from externals instead of src.
(edit) @17229   11 years tbretz Use Queue from externals instead of src.
(edit) @17220   11 years tbretz Reverting to last revision.
(edit) @17219   11 years lyard draft zofits working with Queue and MemoryManager
(edit) @17217   11 years tbretz Updated the FTM_CONTROL service handling. It was broken since kValid ...
(edit) @17215   11 years tbretz Now feedback has a dedicated state to check whether is is calibrated - ...
(edit) @17214   11 years tbretz This fix should change that sometimes the rate is displayed in red ...
(edit) @17213   11 years tbretz Some additons to the tab-completion.
(edit) @17212   11 years tbretz Added new file format ZFits
(edit) @17211   11 years tbretz Added the upcoming new file format ZFits.
(edit) @17203   11 years tbretz Added custom channel offsets to correct gain variations seen in the ...
(edit) @17193   11 years tbretz Added libTools to fitsdump
(edit) @17192   11 years tbretz Read the mean value for the temperatures directly from the report; ...
(edit) @17191   11 years tbretz There is no need to wiat for the commad to be sent.
(edit) @17190   11 years tbretz Adapted script to new feedback states, take the slower ramping into ...
(edit) @17189   11 years tbretz Little improvements to the output.
(edit) @17188   11 years tbretz Removed FEEDBACK-TEST and SINGLEPE-TEST -- they are not needed anymore.
(edit) @17187   11 years tbretz Adapted the waiting time to the slower ramping, removed the setting of ...
(edit) @17186   11 years tbretz Fixed a typo in the evaluation of the configuration; added sending ...
(edit) @17185   11 years tbretz Reverting to last revision.
(edit) @17184   11 years tbretz Reverting to last revision.
(edit) @17183   11 years tbretz Reverting to last revision.
(edit) @17182   11 years tbretz Reverting to last revision.
(edit) @17181   11 years tbretz Reverting to last revision.
(edit) @17180   11 years tbretz Reverting to last revision.
(edit) @17179   11 years tbretz Reverting to last revision.
(edit) @17178   11 years tbretz Reverting to last revision.
(edit) @17177   11 years tbretz Reverting to last revision.
(edit) @17176   11 years tbretz Reverting to last revision.
(edit) @17175   11 years tbretz Reverting to last revision.
(edit) @17174   11 years tbretz Some minor updates and a bug fix in the format of the NOMINAL service.
(edit) @17173   11 years tbretz Use the new algorithm by default; implemented temperature correction ...
(edit) @17172   11 years tbretz Read bias patch wise tenmperatures from fscctrl instead of calculating ...
(edit) @17171   11 years tbretz Changed the order
(edit) @17170   11 years tbretz Implemented a new service providing bias patch wise temperatures; in ...
(edit) @17169   11 years tbretz Improved the median calculation; added a sanity check for the rms ...
(edit) @17168   11 years tbretz Fixed a bug dim.console does not exist.
(edit) @17167   11 years tbretz Added sanity check for rms calculation.
(edit) @17166   11 years tbretz There must be a cast to size -- I missed that last time; fixed a bug ...
(edit) @17147   11 years tbretz Added more options to format the output stream. Added filter support ...
(edit) @17123   11 years tbretz Use the new interpolation algorithm to interpolate the ...
(edit) @17061   11 years tbretz Added automatic link to doxygen documentation.
(edit) @17060   11 years tbretz Added trigger patch wise display of the camera sensor temperatures. ...
(edit) @17059   11 years tbretz Explanation for the camera sensors
(edit) @17058   11 years tbretz Added new page for temp sensors
(edit) @17057   11 years tbretz Moved the absolute sensor temperatures to their own page.
(edit) @17036   11 years lyard remove the hard-coding of the pixels map
(edit) @17034   11 years tbretz Typo: pos -> pow
(edit) @17031   11 years tbretz Could not take single-pe runs when drive system was locked; ...
(edit) @17030   11 years tbretz Fixed a bug in the R8 service; service calibrated currents also during ...
(edit) @17029   11 years tbretz Fixed some possible crashes at startup when some of the arrays do not ...
(edit) @17028   11 years tbretz Updated to the recent changes in the feedback (still untested)
(edit) @17027   11 years tbretz Went over the dim services and updated them with new information or ...
(edit) @17026   11 years tbretz Directly use the calibrated currents from the feedback.
(edit) @17025   11 years tbretz Changed to new scheme of states.
(edit) @17024   11 years tbretz Changed the calibration from juts an offset to an offset and a slope. ...
(edit) @17023   11 years tbretz Added the possibility to send interrupts to the dim server.
(edit) @17022   11 years tbretz Adapted to the changes in biasctrl and feedback (get calibrated ...
(edit) @17021   11 years tbretz Will display the calculated overvoltage now.
(edit) @17020   11 years tbretz Adapted to the changes in biasctrl and feedback (get calibrated ...
(edit) @17019   11 years tbretz Adapted to the changes in biasctrl and feedback (get calibrated ...
(edit) @17016   11 years tbretz Implemented an automatic crate reset in the case the fdactrl is still ...
(edit) @17015   11 years tbretz Try to handle NotReady
(edit) @17014   11 years tbretz Take 10,000 events of type single-pe as single-pe run.
(edit) @17013   11 years tbretz
(edit) @17012   11 years tbretz Move code to crateReset.js to be able to access that also from Main.js
(edit) @17008   11 years lyard unified support for both .gz and .fz files in the viewer
(edit) @17007   11 years lyard added decompressor program
(edit) @17006   11 years lyard this is version with improved wrong channels output
(edit) @17005   11 years tbretz Fixed a copy&paste typo in a description.
(edit) @17004   11 years tbretz Changed the way the source position is updated. When a poitning ...
(edit) @17000   11 years lyard added option to load appropriate table among several ones in a single file
(edit) @16996   11 years tbretz Updated current prediction to latest one.
(edit) @16995   11 years tbretz Changed the order of the fad and the fsc
(edit) @16994   11 years tbretz Fixed a typo
(edit) @16993   11 years tbretz We are not waiting for Idle anymore but Valid instead.
(edit) @16985   11 years tbretz Every context which we enter, we have to exit as well, otherwise ...
(edit) @16981   11 years tbretz Added some preliminary code to extract the type of GCn report.
Note: See TracRevisionLog for help on using the revision log.