source: trunk/FACT++

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @13138   13 years tbretz Implemented request of current sttaus during current feedback once in ...
(edit) @13137   13 years tbretz Ensure that the calibration starts now that the biasctrl doesn't sent ...
(edit) @13136   13 years tbretz Made sure that the first automatic status request at connection also ...
(edit) @13135   13 years tbretz Updated to v19r30
(edit) @13134   13 years tbretz Added a warning message to help debugging.
(edit) @13127   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13126   13 years Jens Buss added a sanity check for fadctrl being in state connected before ...
(edit) @13125   13 years Jens Buss with this one can do the Amplitude Calibration for ROI 300
(edit) @13116   13 years tbretz Do only request the status if the voltage is on; get some dummy ...
(edit) @13112   13 years neise incl 45sec wait for current control
(edit) @13111   13 years neise incl. 45sec wait after bias ramped up
(edit) @13110   13 years neise complete rework, based on comments of TB
(edit) @13109   13 years tbretz Removed default for device address; only connect automatically if ...
(edit) @13092   13 years lyard removed useless annoying outputs
(edit) @13091   13 years tbretz Fixed the averaging implemented yest for more verbose output
(edit) @13087   13 years neise changes TEMP_CONTROL to CURRENT_CONTROL
(edit) @13086   13 years neise intitial commit of fb_ped_n_lp
(edit) @13085   13 years neise intitial commit of fb_data
(edit) @13084   13 years neise intitial commit of fb_on
(edit) @13083   13 years lyard added more verbosity
(edit) @13071   13 years tbretz Set the bias create resistor to 1150 Ohm which (according to the ...
(edit) @13070   13 years tbretz Do not send current request in HandleCalibration when still ramping.
(edit) @13069   13 years tbretz Replaced SET_CHANNEL_DAC by SET_GLOBAL_DAC; adapted FFEDBACK state ...
(edit) @13068   13 years tbretz Removed some old debug output when commands are issued.
(edit) @13062   13 years tbretz Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial ...
(edit) @13061   13 years tbretz Adapted to changed in feedback states; skip start values from feedback
(edit) @13060   13 years tbretz Implemented the possibility of a current feedback which corrects the ...
(edit) @13031   13 years tbretz Switch on dot by default; fixed the summary output for colorgcc
(edit) @13030   13 years tbretz Debugged a few issues like too long comments and a missing check.
(edit) @13010   13 years tbretz Fixed the size of the received magic weather reports.
(edit) @13009   13 years tbretz Updated to latest changes.
(edit) @13008   13 years tbretz Scale the patch currents to pixle currents.
(edit) @13007   13 years tbretz Mini change to the hep output.
(edit) @13006   13 years tbretz Reformated the output to make it better fit the help2man conversion.
(edit) @13005   13 years tbretz Added some debug options; moved the PrintHelp at a better position so ...
(edit) @13004   13 years tbretz Added new program fitscheck.
(edit) @12999   13 years tbretz Added DataWriteFits2
(edit) @12998   13 years tbretz Added out own FITS streamer to the list of possible file formats (5).
(edit) @12997   13 years tbretz Data writer using our own fits streamer class.
(edit) @12994   13 years tbretz Added the number of events to interpolate to the feedback commands; ...
(edit) @12993   13 years tbretz Fixed an issue with the console and shell selection.
(edit) @12991   13 years tbretz Added quality of service to Deviation
(edit) @12990   13 years tbretz Added dim service descriptions
(edit) @12989   13 years tbretz Replaces status==0 but 0x100-3 (ERROR) instead of 99, leading to a ...
(edit) @12967   13 years tbretz Fixed some trivial compiler warnings.
(edit) @12966   13 years tbretz Added wind gusts to GUI.
(edit) @12965   13 years tbretz Added interpretation of 'WP' hoping that the interpretation to be the ...
(edit) @12964   13 years tbretz Now used the common Main::execute approach to launch the program; ...
(edit) @12963   13 years tbretz Print jumps and labels help text; use a MessageImp for output now.
(edit) @12962   13 years tbretz Print jumps and labels help text
(edit) @12961   13 years tbretz Implementd jumps and labels
(edit) @12960   13 years tbretz Flush the buffer before the boot message is printed.
(edit) @12959   13 years tbretz Fixed a compiler warning about an unused variable.
(edit) @12958   13 years tbretz Removed obsolete include of Time.h
(edit) @12957   13 years tbretz
(edit) @12956   13 years tbretz To dfine the virtual Run() function a new class MainImp is used now ...
(edit) @12955   13 years tbretz Added include of boost/version.hpp removed obsolete forward class ...
(edit) @12954   13 years tbretz Added include of LocalControl.h
(edit) @12943   13 years tbretz Implemented a root-mode which allows to use mathematical expressions ...
(edit) @12917   13 years lyard added calibration display
(edit) @12914   13 years tbretz Removed the zero trigger check for the time being.
(edit) @12913   13 years tbretz Do not stop immediately in case of zero triggers, wait until the ...
(edit) @12912   13 years tbretz Transfer precision to stream which is used for formattting
(edit) @12911   13 years tbretz Transfer precision to stream which is used for formattting
(edit) @12908   13 years tbretz Fixed a bug which caused crashes for runs without run-types, e.g. self ...
(edit) @12907   13 years tbretz Do not throw an exception if a server which is requested to be removed ...
(edit) @12906   13 years tbretz Added an example filter.
(edit) @12905   13 years tbretz Added the possibility to give a start row and limit on row-numbers; ...
(edit) @12904   13 years tbretz Added basic root libraries to fitsdump
(edit) @12903   13 years tbretz Improved some log-output.
(edit) @12900   13 years tbretz Added new states in the feedback which allow to run the temp feedback ...
(edit) @12899   13 years tbretz Correction is sent to biasctrl not to feedback -- log-message was wrong.
(edit) @12893   13 years tbretz Checked in as agreed in th emeeting.
(edit) @12890   13 years tbretz Added a missing parenthesis and a missing cast
(edit) @12889   13 years tbretz Improved grouping. Write more than just a single \0 to end the ascii ...
(edit) @12888   13 years tbretz Removed nonsense default comments and units.
(edit) @12887   13 years lyard fixed problem with sub-column selection
(edit) @12886   13 years tbretz Automatically assume all columns if none is given; improved output of ...
(edit) @12885   13 years tbretz Fixed some shadow declarations.
(edit) @12884   13 years tbretz Fixed a bug which caused the first line incorrectly displayed; at this ...
(edit) @12883   13 years lyard fixed first element output bug
(edit) @12881   13 years tbretz Fixed another bug in the wobble calculation; the declination was in ...
(edit) @12879   13 years tbretz Implemeted a command for gobal feedback; splitted the infoHandler into ...
(edit) @12878   13 years tbretz Removed two stray formats in TRACKING_POSITION which were errornously ...
(edit) @12877   13 years tbretz Added force option.
(edit) @12859   13 years tbretz Removed the IndirectRendering - it doesn't work.
(edit) @12853   13 years tbretz Reverting to last revision.
(edit) @12850   13 years tbretz Simplified all the loops looping over the columns to be displayed; do ...
(edit) @12849   13 years tbretz Allow 'A' as format.
(edit) @12848   13 years tbretz If we have a fixed char-array and the unit is either text or string ...
(edit) @12847   13 years tbretz fCalibration must be a float because the service takes floats.
(edit) @12846   13 years tbretz Allow 'A' when converting FITS format to Dim format.
(edit) @12844   13 years tbretz There was a mismatch with the units in SOURCE_POSITION
(edit) @12843   13 years tbretz pixH was not needed because it was never used, but the src++ was ...
(edit) @12840   13 years tbretz fCalibration must be resize to 2*416 not 416
(edit) @12839   13 years tbretz Set precision of ra/dec output to 8
(edit) @12838   13 years tbretz Corrected the DB query and output the sources from the DB.
(edit) @12837   13 years tbretz Renamed the tracking with source name to TRACK_SOURCE; replaced C by W ...
(edit) @12836   13 years tbretz PrintHelp didn't output the commands so far - fixed.
(edit) @12835   13 years tbretz Commented variables which were defined but never used in a reasonable ...
Note: See TracRevisionLog for help on using the revision log.