Timeline
12/09/11:
- 18:32 Changeset [12713] by
- histos of pixels with to high gain in seperate folder, comments, fit functions improved
12/08/11:
- 00:28 Changeset [12712] by
- added differnt typee of fit function to see which fits best; detect pixel with not normal gain
12/07/11:
- 09:08 Changeset [12711] by
- changed logtime
- 09:00 Changeset [12710] by
- forgot this one yesterday
12/06/11:
- 21:51 Changeset [12709] by
- Commented out access of the non-existing bias-database.
- 16:07 Changeset [12708] by
- added the fits logging of QoS only (I did not want to, Thomas obliged me ;)
- 15:58 Changeset [12707] by
- added handling of missing END keyword
- 15:46 Changeset [12706] by
- One of the crosscheck pedestals had the wrong ROI
- 13:55 Changeset [12705] by
- added more columns in grouping files
- 11:50 Changeset [12704] by
- fixed start bug for aux run files
12/05/11:
- 10:38 Changeset [12703] by
- Extract the trigger type from the file.
- 10:29 Changeset [12702] by
- Extract the trigger type from the file.
- 10:26 Changeset [12701] by
- Extract the trigger type from the file.
- 08:46 Changeset [12700] by
- Always the lower rate should be used, either the camera rate or the scaled board rate.
- 08:43 Changeset [12699] by
- Adapted sign of offset to currently used GAPDmap_20111126.txt
- 08:43 Changeset [12698] by
- Fixed the size of the data sent in the service and changed the intentionally missed reports to 1
- 08:42 Changeset [12697] by
- Fixed the handleRateScan and the table name for the run-comments
12/03/11:
- 01:48 Changeset [12696] by
- added tooltip for comment
- 01:48 Changeset [12695] by
- added mode tooltip
- 00:17 Changeset [12694] by
- added new database values
- 00:15 Changeset [12693] by
- added auxiliary fill script
- 00:14 Changeset [12692] by
- continue instead of exit in case of unknown runtype
- 00:12 Changeset [12691] by
- added filling of information into db
12/02/11:
- 18:43 Changeset [12690] by
- added plot Amplification vs. Channel
- 16:24 Changeset [12689] by
- changed runnum to runid in aux headers
- 16:23 Changeset [12688] by
- added run number in keywords
- 16:07 Changeset [12687] by
- removed plotting in fitsdump svn version
- 16:07 Changeset [12686] by
- added handling of mjdref in fitsdump
- 14:45 Changeset [12685] by
- fixed camera position bug with blurry pixels
- 12:27 Changeset [12684] by
- added more values
- 05:23 Changeset [12683] by
- adjusted for current Calibration and did some code formatting ... whitespaces
- 04:28 Changeset [12682] by
- removed the reason for a stupid compiler warning
12/01/11:
- 23:32 Changeset [12681] by
- ignoring *.log now
- 23:29 Changeset [12680] by
- initial commit of DimCtrl Script for DataTaking
- 17:39 Changeset [12679] by
- added getting mjd and information from some slow control files
- 16:37 Changeset [12678] by
- oops
- 16:32 Changeset [12677] by
- improved viewer
- 16:07 Changeset [12676] by
- small fix to create new directories
- 11:22 Changeset [12675] by
- improved display of fitsdump
- 11:14 Changeset [12674] by
- Added handling of raw data files
- 08:41 Changeset [12673] by
- treating every 9th channel differently - cutting off 60 slices in the end
11/30/11:
- 14:58 Changeset [12672] by
- bug fix
11/29/11:
- 16:55 Changeset [12671] by
- changed color palette
- 16:36 Changeset [12670] by
- viewer bugfix
- 16:13 Changeset [12669] by
- viewer improvements
- 12:06 Changeset [12668] by
- Added disk space warning.
- 00:55 Changeset [12667] by
- added (webinterface to query, insert and update comments concerning runs)
- 00:54 Changeset [12666] by
- added (file with names and definitions for fact_runinfo.php)
- 00:54 Changeset [12665] by
- added (webinterface to display content of factdata.runinfo)
- 00:19 Changeset [12664] by
- updated MAILTO to shift@fact-project.org
11/28/11:
- 16:13 Changeset [12663] by
- Changed all references to vcoltages to DAC
- 06:49 Changeset [12662] by
- added (started writing a script to read data from slow control files)
- 03:52 Changeset [12661] by
- added (crontab for coma)
- 03:21 Changeset [12660] by
- added notes
- 03:20 Changeset [12659] by
- bugfix for update
11/27/11:
- 18:36 Changeset [12658] by
- Implemented access to the CommentDB for commenting runs.
- 14:17 Changeset [12657] by
- Made the fad tab a little bit less height.
- 11:04 Changeset [12656] by
- Fixed an issue in the rate scan which caused the threshold been incorrectly grabbed from the report. Replaced fEvtBldWidget by fGroupEthernet and fGroupOutput
- 11:03 Changeset [12655] by
- Moved the remaining stuff from the event builder to the logger tab
- 10:33 Changeset [12654] by
- Changing the step size didn't work with the previous implementation.
11/26/11:
- 16:42 Changeset [12653] by
- Little fixed to the new weather data.
- 15:36 Changeset [12652] by
- Get the magic weather station data properly into the GUI.
- 15:11 Changeset [12651] by
- typo corrected
- 15:05 Changeset [12650] by
- added run.py - an example how to run root scripts on a series of files calling a root macro
- 13:16 Changeset [12649] by
- Do not send tracking reports if there is no tracking (MJD==0)
- 12:53 Changeset [12648] by
- Fixed a bug which caused the feedback to ramp up the voltages even when they are off.
11/25/11:
- 22:47 Changeset [12647] by
- 22:47 Changeset [12646] by
- Added magicweather
- 06:09 Changeset [12645] by
- changed option for automatic running
- 06:07 Changeset [12644] by
- added roitm; added new option
- 06:04 Changeset [12643] by
- added CheckRawData.sh
- 06:03 Changeset [12642] by
- during day check for 500 GB, during night during 200 GB
11/24/11:
- 22:23 Changeset [12641] by
- fixed bug
- 16:04 Changeset [12640] by
- same as gainfit.C but makes a 3-Gaussian fit over a amplitude spectrum
- 15:53 Changeset [12639] by
- Fixed a compiler warning.
- 15:51 Changeset [12638] by
- Some little improvement to command descriptions.
- 15:50 Changeset [12637] by
- fMjd now Unix time.
- 15:50 Changeset [12636] by
- Adapted writing of TSTART and TSTOP to fMjd in the data logger now being unix time.
- 15:49 Changeset [12635] by
- Adapted handling of rate scan service.
- 15:45 Changeset [12634] by
- Initialize the trigger counters to zero.
- 08:39 Changeset [12633] by
- added check if /daq is mounted
- 08:38 Changeset [12632] by
- added new values, rearranged checks
- 08:38 Changeset [12631] by
- added output of df -h
11/23/11:
- 14:21 Changeset [12630] by
- Removed an obsolete fGeomCam; make sure that everything is initialized properly
- 14:18 Changeset [12629] by
- Make the result of the noise alculation valid, so that it can directly be used on the tasklist.
- 14:17 Changeset [12628] by
- Make sure that no name for the mapping can be given; print the name in the error message; Get the runtype from the header; Use PCTime as a fallback to UnixTimePC
- 14:15 Changeset [12627] by
- Do not print the mapping table of the header by default.
- 14:13 Changeset [12626] by
- Return the dfeault constructor rather then 0, to allow using of the template for string
- 14:09 Changeset [12625] by
- Added possibility to return mean and rms in GetPixelContant
- 14:05 Changeset [12624] by
- Rotated camera by 90 deg
- 05:42 Changeset [12623] by
- added new version of start and stop time
- 05:41 Changeset [12622] by
- added logging
- 05:40 Changeset [12621] by
- added some logging
11/22/11:
- 23:58 Changeset [12620] by
- Removed some stray endl in messages.
- 23:52 Changeset [12619] by
- Implemented writing to the header whether a corresponding drs-calib file should exist.
- 23:39 Changeset [12618] by
- Implemented Time::UnixDate and use this instead of UnixTime when writing TSTART and TSTOP in FITS header -- units there are days not seconds.
- 23:02 Changeset [12617] by
- Removed some debug output.
- 14:13 Changeset [12616] by
- Changed TSTART/TSTOP according to match the latest changes in the raw data header.
- 14:10 Changeset [12615] by
- Some fixed to the latest changes.
- 13:44 Changeset [12614] by
- 13:27 Changeset [12613] by
- Implemented TSTART and TSTOP as integral and fractional part of Unix times (seee MJDREF) and DAT-OBS and DATE-END as the start and stop human readable time stamp
- 13:27 Changeset [12612] by
- Set the file format back to kCalib if the thrid drs calibration run is reset
- 13:20 Changeset [12611] by
- Added MJDREF and TIMEUNIT to header.
- 07:59 Changeset [12610] by
- added pyscripts folder to tools added fsc3.py, fscvolt1.py for plotting voltages and temperature added paux.py for running on a set of data files
- 06:18 Changeset [12609] by
- added new information and checks
- 02:22 Changeset [12608] by
- added new databases to backup list
11/21/11:
- 22:15 Changeset [12607] by
- this file is cited as an example in the README and hence I added it here, but its maintained version will be put into another place (I think of tools/python)
- 22:11 Changeset [12606] by
- various updates of the contents and the form, not finished
- 17:55 Changeset [12605] by
- Implemented counters for the different trigger types and time of first and last event.
- 14:54 Changeset [12604] by
- added fana2.C, a working version of fana.C
- 13:27 Changeset [12603] by
- Plotter for the fact pointing.
- 13:26 Changeset [12602] by
- First FACT pointing model
- 13:24 Changeset [12601] by
- First fact tpoints.
- 13:11 Changeset [12600] by
- Display the first point correctly
- 13:10 Changeset [12599] by
- Added a command to set the LED brightness in FACT; changed the units of the errors in FACT; make use of the 'real' MJD in the report; added the pdo3 status to the end of the report
- 13:08 Changeset [12598] by
- Implemented a new class MTcpIpFact using a duplex communication for FACT
- 13:06 Changeset [12597] by
- Replaced MTcpIpIO by MTcpIpFact for FACT
- 13:03 Changeset [12596] by
- Removed the zenith angle position correction for FACT
- 13:02 Changeset [12595] by
- Added some more output. Fill fCosy->fMJD and update nominal RaDec during tracking; changed the control loop parameters and the position alignment for FACT
- 12:57 Changeset [12594] by
- Skip starguider mode for FACT
- 12:56 Changeset [12593] by
- Made the fTPoint public to allow the FACT Cosy to access it.
- 12:55 Changeset [12592] by
- Added the MJD for transmission with the reports
- 12:54 Changeset [12591] by
- Changed the starguider command to make it work with FACT; added the WM_LEDS to be able to set the FACT LED voltages; added the status to the reports; make stat1 and stat2 two bytes long when updating the GUI
- 11:33 Changeset [12590] by
- Removed special fact status -- unified already in MCosy.cc
- 11:31 Changeset [12589] by
- Added possibility to track celestial objects; adapted status bit pattern for pdo3 for FACT
- 11:24 Changeset [12588] by
- Added new ReadSocket code for FACT SPS... should be used in MAGIC SPS, too.
- 11:17 Changeset [12587] by
- Added sending the command to set the FACT Led voltages
- 11:16 Changeset [12586] by
- Added a missing output in case there are zombies in the network.
- 09:02 Changeset [12585] by
- Updated to v19r26.
- 06:58 Changeset [12584] by
- added (script to check aux data files and fill information into database)
- 06:57 Changeset [12583] by
- added (script to check raw data files and fill information into database)
- 06:56 Changeset [12582] by
- changed to take into account the current and the 3 previous nights
- 04:05 Changeset [12581] by
- GetDrsOffset.C initial commit
- 02:07 Changeset [12580] by
- ingnore root dependency files *.d now
- 01:47 Changeset [12579] by
- GetN(const string &key) produces now decent error output in case of not found key
- 01:26 Changeset [12578] by
- remove Maxima Below accepts negative thresholds now
11/20/11:
- 07:14 Changeset [12577] by
- adapted times of crons
- 07:13 Changeset [12576] by
- changed to new structure (nfs mount of disk); bugfix
- 07:11 Changeset [12575] by
- included algorithm to make sure that only finished files are zipped
- 01:59 Changeset [12574] by
- comment
- 00:43 Changeset [12573] by
- FACT Pseudorandom trigger generator code initial commit
- 00:11 Changeset [12572] by
- fixed typo
11/19/11:
- 23:41 Changeset [12571] by
- Fixed more option description.
- 23:40 Changeset [12570] by
- Fixed some option description.
- 06:06 Changeset [12569] by
- changed time for zip cron
- 06:05 Changeset [12568] by
- added cron to copy db backup
- 06:02 Changeset [12567] by
- added (script to backup LP DB in Wue)
- 04:56 Changeset [12566] by
- changed MAILTO
- 04:56 Changeset [12565] by
- minor changes
- 04:55 Changeset [12564] by
- added (crontab file for fact_opr on fact-viewer)
- 03:49 Changeset [12563] by
- added (script to rsync raw data to Wuerzburg for backup)
- 03:48 Changeset [12562] by
- added (script to rsync auxiliary data to Wuerzburg for backup)
- 03:45 Changeset [12561] by
- minor changes
- 02:27 Changeset [12560] by
- adapted times for rsync and diskcheck scripts
- 02:25 Changeset [12559] by
- implemented bwlimit between 18h and 8h
- 02:24 Changeset [12558] by
- changed limit to 200 GB
11/18/11:
- 20:36 Changeset [12557] by
- changed such that only last night is rsynced
- 18:22 Changeset [12556] by
- ...now has most propable Single peak in one Histogram with Landau-fit
- 15:07 Changeset [12555] by
- Added the UNIX start-time to the report.
- 04:27 Changeset [12554] by
- bufix
- 02:18 Changeset [12553] by
- adapted times for disk usage check
- 02:06 Changeset [12552] by
- bugfix
11/17/11:
- 17:54 Changeset [12551] by
- added warning in case of time difference larger than 1 second
- 17:32 Changeset [12550] by
- added (cronjob file for gui)
- 17:30 Changeset [12549] by
- added new scripts
- 17:28 Changeset [12548] by
- added (script to check disk usage on data taking machines)
- 17:25 Changeset [12547] by
- added (script to zip raw data on data)
- 17:25 Changeset [12546] by
- added (scripts to rsync raw and aux files from daq to data)
- 15:00 Changeset [12545] by
- added export of Overlay Maximum into histogram
- 04:04 Changeset [12544] by
- added MAILTO
11/16/11:
- 23:03 Changeset [12543] by
- Added file.
- 22:58 Changeset [12542] by
- Start the calibration even when the voltage is off
- 22:02 Changeset [12541] by
- Added drivectrl.
- 21:55 Changeset [12540] by
- Fixed a bug which could cause crahses when a transmission is interrupted at the moment the connection is opened and e.g. the bias crate is not yet switched on.
- 18:37 Changeset [12539] by
- Adapted run-type names
- 15:53 Changeset [12538] by
- moved the flush from every row entry to every minute
- 15:44 Changeset [12537] by
- added services descriptions
- 12:09 Changeset [12536] by
- added flushing of nightly files after each row
- 10:24 Changeset [12535] by
- fixed a poorly dealt with closing of files once a day. Should be better now
- 03:58 Changeset [12534] by
- Improved some log message
- 00:37 Changeset [12533] by
- Fixed query to not get deleted entries from teh database.
- 00:27 Changeset [12532] by
- Added a drive status dim service.
- 00:25 Changeset [12531] by
- Fixed the number of lines expected from a GPAD map file.
- 00:22 Changeset [12530] by
- Removed a stray whitespace
- 00:19 Changeset [12529] by
- The CRAEATOR of all programs is not datalogger
- 00:18 Changeset [12528] by
- Removed some obsolete fad commands; fixed some signal/slot names; some resizing
11/15/11:
- 20:54 Changeset [12527] by
- faster abort in case of wrong ROI calib file
- 19:27 Changeset [12526] by
- Added descriptions for some states.
- 19:26 Changeset [12525] by
- Included rate control into the mcp status.
- 14:10 Changeset [12524] by
- Removed a compiler warning.
- 14:10 Changeset [12523] by
- Added widgets for the control of the file format.
- 14:09 Changeset [12522] by
- Added a new service FILE_FORMAT to distribute the file format currently switched on; added controlos and displays to set and see the file format.
- 11:56 Changeset [12521] by
- supports new DRS calibration and new fits open methods
- 02:47 Changeset [12520] by
- Do not swap the package length... for some unknown reasons this also doesn't work an produce crashes.
11/14/11:
- 23:54 Changeset [12519] by
- this way of subtracting TriggerOffset minimizes the mean and rms
- 20:06 Changeset [12518] by
- works now with the current DrsCalibration.C and openXXXFits.c
- 19:39 Changeset [12517] by
- should work now ...
- 19:38 Changeset [12516] by
- missing semicolon
- 19:15 Changeset [12515] by
- default value for verbosity Level
- 19:14 Changeset [12514] by
- try with new calibration
- 19:14 Changeset [12513] by
- next try
- 17:07 Changeset [12512] by
- debugged typo
- 16:05 Changeset [12511] by
- tried to prepare for all ROIs and added a lot of comments
- 14:45 Changeset [12510] by
- Removed + and - from fits column names.
- 09:11 Changeset [12509] by
- trying to generalize fits file opening
- 05:45 Changeset [12508] by
- 1st step towards calibrating all ROIs
11/13/11:
- 18:06 Changeset [12507] by
- Removed the GAPD voltage from the PixelMap and implemented a BiasMap class instead wich content are read from a special file containing the nominal voltages and the offsets.
- 16:50 Changeset [12506] by
- Moved more variable declarations into the for loops, improved log-messages, removed some compiler warnings.
- 15:42 Changeset [12505] by
- Do not change rates if a ratescan is in progress.
- 15:39 Changeset [12504] by
- Stop the rate scan if the trigger rate is zero.
11/12/11:
- 16:10 Changeset [12503] by
- Make sure that we don't get exceptions from old drs calib files without time marker channels (NTM)
- 01:34 Changeset [12502] by
- runnable with just the first 3 parameters
- 01:27 Changeset [12501] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
- 01:26 Changeset [12500] by
- Some fixes to the new AddT to make it compile.
- 01:26 Changeset [12499] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
- 01:25 Changeset [12498] by
- Implemented commands and buttons to start a drs calibration and to reset the secondary baseline.
11/11/11:
- 03:29 Changeset [12497] by
- Changed the behaviour of the MCP reset button; added disable of ratescan controls
- 03:27 Changeset [12496] by
- Changed some rate scan widget names.
- 03:21 Changeset [12495] by
- Removed some obsolete calls to Reverse; correctly treat the fDNA
- 03:20 Changeset [12494] by
- Correctly scale the reference clock value; write DNA as hex value because 64bit values didn't work.
- 03:18 Changeset [12493] by
- Updated an error message and a fixed a problem with non-array columns.
- 02:48 Changeset [12492] by
- Removed hacked byte swapping from debugHead
- 02:47 Changeset [12491] by
- Fixed byte swapping after data reception; moved all counters into the for-loop scope thanks to switching to stdc in the configure.ac
- 01:51 Changeset [12490] by
- Set C to STDC
- 00:51 Changeset [12489] by
- Fixed some mistakes in the new algorithmsin gotNewRun and runOpen
- 00:48 Changeset [12488] by
- Added a warning in case no rates.
- 00:47 Changeset [12487] by
- Preliminary version of a time calibration algorithm
11/10/11:
- 12:49 Changeset [12486] by
- 04:33 Changeset [12485] by
- Extreme memory swapping
- 00:19 Changeset [12484] by
- Commented RUN because it should be identical to RUNID; removed the RUNTYPE and renamed TYPE to RUNTYPE; shortened and improved some descriptions
- 00:18 Changeset [12483] by
- Changed the ORGIN from ISDC to FACT
Note:
See TracTimeline
for information about the timeline view.
