Timeline
03/24/12:
- 22:23 Changeset [13217] by
- Some improved debug output.
- 22:23 Changeset [13216] by
- Updated some FITS descriptions.
- 04:10 Changeset [13215] by
- short script to check if bias, feedback, drive and fad are in the correct state to write data
- 04:08 Changeset [13214] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
- 04:08 Changeset [13213] by
- added check before data run to assure that bias, feedback, drive and fad are in the correct state
03/23/12:
- 22:32 Changeset [13212] by
- Updated state names.
- 22:17 Changeset [13211] by
- Improves state handling.
- 22:09 Changeset [13210] by
- Removed all the unnecessary log-messages.
- 22:08 Changeset [13209] by
- Implemented fVerbose to switch verbosity of default messages on and off.
- 16:00 Changeset [13208] by
- Write comments as such.
- 15:59 Changeset [13207] by
- Addeda new log-class: comments
- 15:59 Changeset [13206] by
- Pipe comments to the log-file; added the missing jump label.
- 14:50 Changeset [13205] by
- added fence from prevent column desc of messages services
- 14:26 Changeset [13204] by
- added output to see which service creates column warning
- 13:48 Changeset [13203] by
- Updated the options.
- 13:45 Changeset [13202] by
- Updated the help text.
- 12:05 Changeset [13201] by
- Made DebugTx optional.
- 12:05 Changeset [13200] by
- Use Debug() when fDebugTx is enabled.
- 11:57 Changeset [13199] by
- Replaced wind direction by human readable strings.
- 11:44 Changeset [13198] by
- Replace degree value for wind direction with human readable value
- 11:33 Changeset [13197] by
- Shortened some dim descriptions.
- 11:31 Changeset [13196] by
- Shortened some dim descriptions.
- 11:28 Changeset [13195] by
- Shortened descriptions to make the datalogger more happy.
- 11:21 Changeset [13194] by
- Updated some dim descriptions; suppress unecessary output by default.
- 11:13 Changeset [13193] by
- Print AddService info only when it is really a service.
- 11:06 Changeset [13192] by
- Some improvement to header evaluation.
- 10:22 Changeset [13191] by
- Changed the default interval from 55s to 25s. Made it an option.
- 09:08 Changeset [13190] by
- Propagate max number of events and time correctly as signed int.
- 09:01 Changeset [13189] by
- Delay setting new volatges during current requests.
- 04:57 Changeset [13188] by
- changed the output
- 04:56 Changeset [13187] by
- changed the output
- 04:06 Changeset [13186] by
- resume data taking after it had to be aborted during first run of four
- 02:08 Changeset [13185] by
- spell check
- 02:07 Changeset [13184] by
- Script for Crab data taking, that automatically takes both wobble positions and sents the necessary commands to drivectrl
- 01:58 Changeset [13183] by
- changed the time waited before sending commands to drivectrl
03/22/12:
- 21:19 Changeset [13182] by
- included calculation of some more hillas parameters, still no unit tests ... no clear structure, but there is an example script in examples/hillas_test.py
- 21:17 Changeset [13181] by
- added member, which contains numpy arrays instead of Vector2 objects. this class needs reworking! It is simply ugly
- 21:15 Changeset [13180] by
- test functions are using Plotter class, and SignalGenerator class in order to produce test vectors, before they were doing that themselves.
- 21:02 Changeset [13179] by
- Updated help text for '.s'
- 21:01 Changeset [13178] by
- Send current requests in current control mode only when voltage is switched on.
- 21:01 Changeset [13177] by
- initial commit of a script using the pyafact/image_extractors ...
- 21:00 Changeset [13176] by
- changed pyfact_rename to pyfact and switched on the tabulator checking
- 20:41 Changeset [13175] by
- introduced calculation of number of islands, but I did not want to change the return value, maybe I should return a dict as well ...
- 20:38 Changeset [13174] by
- Plotter was not correctly plotting the grid, introduced the plotting of the grid into the __call__ now it works
- 16:57 Changeset [13173] by
- added (script to build sequences)
- 16:56 Changeset [13172] by
- added (crontab file for fact_opr on isdc-viewer00)
- 16:55 Changeset [13171] by
- improved output, fixed bugs
- 15:01 Changeset [13170] by
- Added checks for the consistency of the event and trigger number.
- 14:56 Changeset [13169] by
- Improved some debug output, removed obsolete SetMode; commented out some old debug output.
- 14:52 Changeset [13168] by
- Implemented a function for word wraping
- 14:51 Changeset [13167] by
- Moved read to cc file; implemented first version of a database interface.
- 11:14 Changeset [13166] by
- Make sure that the connection is the last in the configuration; improved sanity checks in Track()
- 11:04 Changeset [13165] by
- Added some improved output.
- 10:21 Changeset [13164] by
- Implemented new command to set all offsets individually (for current control)
- 10:19 Changeset [13163] by
- Replaces all 416 by kNumChannels; send the correct command to set the correct offset for all channels individually in current control.
- 07:06 Changeset [13162] by
- DimScript for data taking, that only takes the 4 5min data runs, can be used if DataTaking1/2 crashed at beginning of data tacking
- 07:04 Changeset [13161] by
- DimScript for data taking MRK421, that automatically takes both wobble positions and sents the necessary commands to drivectrl
03/21/12:
- 14:33 Changeset [13160] by
- Some clean up to the commands.
- 14:22 Changeset [13159] by
- Assume that an empty folder name means '.'
- 13:50 Changeset [13158] by
- added insert to nightly status tables, removed insert for status tables for runs (done with mysql trigger now)
03/20/12:
- 14:37 Changeset [13157] by
- FSC resistances converted into temperature for online display
- 09:27 Changeset [13156] by
- new interface of next(), and hence a new option in the __init__() methon ... old interface is considered depricated
- 09:09 Changeset [13155] by
- debugged DRs amplitude calibration. tom must not be rolled
03/19/12:
- 17:20 Changeset [13154] by
- added (script to check status of transfer for deleting data)
- 17:09 Changeset [13153] by
- treat case that file is not yet there
- 17:09 Changeset [13152] by
- bugfix for drsfiles
- 16:36 Changeset [13151] by
- added doc; this is just an example, nothing ready, to be adapted to work at ISDC, I just made this some time ago on my Laptop
- 11:56 Changeset [13150] by
- enabled tab checking and excahnged python_rename with python
- 11:55 Changeset [13149] by
- enabled tab checking and excahnged python_rename with python
- 11:54 Changeset [13148] by
- enabled tab checking and excahnged python_rename with python
- 11:52 Changeset [13147] by
- enabled tab checking and excahnged python_rename with python
- 11:51 Changeset [13146] by
- enabled tab checking and excahnged python_rename with python
- 11:49 Changeset [13145] by
- exchanged pyfact_rename by pyfact and enabled tab checking. removed some tabs as well
- 11:45 Changeset [13144] by
- enables tab checking and exchanged pyfact_rename by pyfact
- 11:41 Changeset [13143] by
- included python -tt option. thus checking for tabs/spaces
- 11:34 Changeset [13142] by
- included tab checking, and substituded all tabs by spaces
- 11:32 Changeset [13141] by
- moved newer pyfact_rename.py to pyfact.py ... keeping its history hopefully
- 11:31 Changeset [13140] by
- deletet depricated pyfact.py
- 11:31 Changeset [13139] by
- debugged two lines
- 08:26 Changeset [13138] by
- Implemented request of current sttaus during current feedback once in a second to ensure a good average.
03/18/12:
- 22:59 Changeset [13137] by
- Ensure that the calibration starts now that the biasctrl doesn't sent a voltage set request (which would return the currents) anymore when the voltage is already set.
- 21:55 Changeset [13136] by
- Made sure that the first automatic status request at connection also happens when the automatic updates are switched off; do not send a voltage set command when the voltages are already set.
- 20:53 Changeset [13135] by
- Updated to v19r30
03/16/12:
- 12:57 Changeset [13134] by
- Added a warning message to help debugging.
- 09:01 Changeset [13133] by
- added new member Coordinator.chid2vec, which is the same as chid2coor, but contains euclid.Vector2 instead of tuples
- 08:58 Changeset [13132] by
- moved tests out of __main__ into dedicated _test_funcs(), so making __main__ smaller and easier to comprehend
- 08:56 Changeset [13131] by
- NOTE: included use of ImageExtractor classes, not yet testet
- 08:54 Changeset [13130] by
- initial commit of Image Parameter Extractor classes ... only the upper two are working. No _test_funcs() ... no callback funcs ... a lot of work to do
- 08:52 Changeset [13129] by
- moved _test_SimplePlotter() down in the file
- 08:51 Changeset [13128] by
- just a text, to be refined during and after the course
- 01:12 Changeset [13127] by
- added a sanity check for fadctrl being in state connected before writing any data
- 01:12 Changeset [13126] by
- added a sanity check for fadctrl being in state connected before writing any data
- 01:08 Changeset [13125] by
- with this one can do the Amplitude Calibration for ROI 300
03/15/12:
- 22:38 Changeset [13124] by
- pyfact made identical to pyfact_rename.py
- 21:44 Changeset [13123] by
- call back of pyfact drs calibration
- 21:43 Changeset [13122] by
- tiny modifications - still not final
- 21:41 Changeset [13121] by
- bug fix in drs calibration
- 13:57 Changeset [13120] by
- tidied up a bit. moved examples to examples and deleted scripts, I never used anymore
- 13:56 Changeset [13119] by
- debugged return value of AmplitudeCleaner in case of return_bool_mask=False, was tuple of list, is now list
- 13:43 Changeset [13118] by
- included Plotter-class from depricated plotter.py-module with name SimplePlotter
- 09:51 Changeset [13117] by
- gDirectory->GetListOfKeys() can be NULL... fixed.
- 09:27 Changeset [13116] by
- Do only request the status if the voltage is on; get some dummy reports for the currents before starting to calibrate; do not allow negative feedback corrections
- 08:54 Changeset [13115] by
- moved EXTNAME keyword further down for compatibility with fverify
- 00:02 Changeset [13114] by
- added some examples
03/14/12:
- 23:56 Changeset [13113] by
- initial commit of first thoughts about how to collect anaysis results
- 22:17 Changeset [13112] by
- incl 45sec wait for current control
- 22:14 Changeset [13111] by
- incl. 45sec wait after bias ramped up
- 21:19 Changeset [13110] by
- complete rework, based on comments of TB
- 19:27 Changeset [13109] by
- Removed default for device address; only connect automatically if device address given.
- 19:26 Changeset [13108] by
- added check if directory exists
- 19:25 Changeset [13107] by
- added tmp path for rsyn
- 17:24 Changeset [13106] by
- tiny correction
- 16:53 Changeset [13105] by
- added plot3.py, look at single DRS pipeline data + spike filter
- 16:53 Changeset [13104] by
- added a comment
- 16:51 Changeset [13103] by
- added some comments
- 15:02 Changeset [13102] by
- UNTESTED: example script using the AmplitudeCleaner, for calculating area vs log(size), compare to begin.py
- 15:00 Changeset [13101] by
- initial commit of class AmplitudeCleaner
- 14:59 Changeset [13100] by
- debugged handling of boolean masks in CamPlotter
- 10:12 Changeset [13099] by
- run CheckStatus.sh more often
- 09:59 Changeset [13098] by
- adapted time for one job
- 09:58 Changeset [13097] by
- removed not needed lines
- 09:08 Changeset [13096] by
- modified working version - not finished
- 09:07 Changeset [13095] by
- modified class hist for more compatibility with ROOT
- 09:03 Changeset [13094] by
- improved logging
- 09:03 Changeset [13093] by
- added drs file to transfer
- 08:49 Changeset [13092] by
- removed useless annoying outputs
03/13/12:
- 20:38 Changeset [13091] by
- Fixed the averaging implemented yest for more verbose output
- 19:34 Changeset [13090] by
- debugged CamPlotter class ... wrong identation as some point
- 19:33 Changeset [13089] by
- the same hack as in plotters was included, in order to ensure, that the map_dn.txt file is found
- 19:19 Changeset [13088] by
- running version - produces area vs log(size) plot
- 18:26 Changeset [13087] by
- changes TEMP_CONTROL to CURRENT_CONTROL
- 18:07 Changeset [13086] by
- intitial commit of fb_ped_n_lp
- 18:06 Changeset [13085] by
- intitial commit of fb_data
- 18:06 Changeset [13084] by
- intitial commit of fb_on
- 15:07 Changeset [13083] by
- added more verbosity
- 14:49 Changeset [13082] by
- added drs-files to rsync and check for existance of links
- 12:00 Changeset [13081] by
- initial commit of cleaning ...
- 12:00 Changeset [13080] by
- made CamPlotter smarter, can now handle data, and masks
- 11:19 Changeset [13079] by
- extra log file for merpp
- 10:48 Changeset [13078] by
- Added th possibility to use a real regular expression.
03/12/12:
- 18:10 Changeset [13077] by
- initial commit of script calculating the number of events, which would have been triggered.... very simple assumptions
- 16:34 Changeset [13076] by
- added function __add__ to RawData. one can now jump over a certain amout of events, by doing: e.g. run=run+34
- 16:34 Changeset [13075] by
- added readout of the FAD trigger time out of the raw data. RawData.board_times contains this information.
- 16:32 Changeset [13074] by
- solved an issue with CamPlotter, when calling it from a different folder. maybe this was not yet fully understood by me. And plotting histograms without a labe is now possible
- 16:29 Changeset [13073] by
- initial commit of python script for baseline jump studies
- 12:39 Changeset [13072] by
- example for sabrina
- 12:37 Changeset [13071] by
- Set the bias create resistor to 1150 Ohm which (according to the measurements of last night) seem to be a good compromise to include also cables, etc; added some more informative output to the Info
- 08:20 Changeset [13070] by
- Do not send current request in HandleCalibration when still ramping.
03/11/12:
- 20:04 Changeset [13069] by
- Replaced SET_CHANNEL_DAC by SET_GLOBAL_DAC; adapted FFEDBACK state number to new state number.
- 20:00 Changeset [13068] by
- Removed some old debug output when commands are issued.
- 17:41 Changeset [13067] by
- added new monitoring script
- 17:24 Changeset [13066] by
- added new monitoring scripts
- 17:10 Changeset [13065] by
- added temp directory for rsync
- 17:09 Changeset [13064] by
- added (script to check database for failed and crashed jobs)
- 17:08 Changeset [13063] by
- added (script to check global logfile for errors and warnings)
- 13:29 Changeset [13062] by
- Updated the resistors. We have now 3900Ohm at the G-APD, 1kOhm serial resistor; 1kOhm in the bias crate; 100Ohm measurement resistor in the bias crate.
- 13:11 Changeset [13061] by
- Adapted to changed in feedback states; skip start values from feedback
- 13:10 Changeset [13060] by
- Implemented the possibility of a current feedback which corrects the applied voltage according to the measured currents.
03/10/12:
- 00:17 Changeset [13059] by
- adapted paths
03/09/12:
- 23:32 Changeset [13058] by
- 23:31 Changeset [13057] by
- added priority to status queries
- 22:58 Changeset [13056] by
- adapted paths in crontab files
- 22:27 Changeset [13055] by
- adapted scripts to changes in directory structure
- 22:18 Changeset [13054] by
- reworked version of scripts doing backup to Wuerzburg
- 22:15 Changeset [13053] by
- added (scripts for transfer from LP to ISDC)
- 22:13 Changeset [13052] by
- added (setup file for processing in La Palma)
- 22:12 Changeset [13051] by
- added (setup files for processing at ISDC)
- 22:11 Changeset [13050] by
- added (jobmanager to run callisto and star on a computing cluster
- 22:09 Changeset [13049] by
- added (scripts for callisto and star)
- 22:08 Changeset [13048] by
- added (scripts to check availability of files)
- 22:04 Changeset [13047] by
- moved db backup script to transfer directory
- 22:03 Changeset [13046] by
- moved rsync scripts to transfer directory
- 22:01 Changeset [13045] by
- moved La Palma rsync scripts to transfer directory
- 21:28 Changeset [13044] by
- added (directory for setup files)
- 21:27 Changeset [13043] by
- moved check scripts to monitoring directory
- 21:23 Changeset [13042] by
- moved to processing directory
- 21:23 Changeset [13041] by
- moved to processing directory
- 21:19 Changeset [13040] by
- moved FillAuxData.sh to processing directory
- 21:18 Changeset [13039] by
- added queries to fill status tables
- 21:12 Changeset [13038] by
- moved zipscript to transfer directory
- 21:11 Changeset [13037] by
- added (directory for monitoring scripts)
- 21:08 Changeset [13036] by
- moved crontab files to cron directory
- 21:07 Changeset [13035] by
- moved crontab files to cron directory
- 21:02 Changeset [13034] by
- added (directory for processing scripts)
- 20:53 Changeset [13033] by
- added (directory for crontab files)
- 20:50 Changeset [13032] by
- added (directory for transfer scripts)
- 20:36 Changeset [13031] by
- Switch on dot by default; fixed the summary output for colorgcc
- 16:49 Changeset [13030] by
- Debugged a few issues like too long comments and a missing check.
- 10:25 Changeset [13029] by
- class somewhere from the internet. used in coor.py for 2D vectors
- 10:23 Changeset [13028] by
- added class WindowIntegrator, which integrate around a give position in a given window
- 10:19 Changeset [13027] by
- in case the length of the filter coeffs is zero, the shape of the return was not ok. now it should be.
- 10:15 Changeset [13026] by
- intitial commit of class that calculates list of NN for each pixel
- 10:13 Changeset [13025] by
- comment translated to engl
- 10:08 Changeset [13024] by
- added checking for input files, before using them :-)
- 10:01 Changeset [13023] by
- initial commit python trigger studies scripts ... you need to put correct pathes in
- 09:39 Changeset [13022] by
- debug: some ROI=1024 was still hardcoded ... using now self.Nbln, self.Ntom and self.Ngm .. which were already defined but not used
- 09:04 Changeset [13021] by
- added callback function
- 09:04 Changeset [13020] by
- added spike_ana.py a simple script using the callback function of DRSSpikes class
03/08/12:
- 16:03 Changeset [13019] by
- updated doc strings
- 15:56 Changeset [13018] by
- more plotters: testable via ./plotters.py
- 12:11 Changeset [13017] by
- example finished
- 12:04 Changeset [13016] by
- added some functions
- 12:01 Changeset [13015] by
- initial commit of a test file
- 11:24 Changeset [13014] by
- bugs fixed, looks o.k., but more detailed testing needed, threshold = 7.
- 11:24 Changeset [13013] by
- pyfact: bugs fixed, looks o.k., but more detailed testing needed, threshold = 7.
- 10:04 Changeset [13012] by
- improved algorithm, now only loops previously defined candidates, now uses all function and sign of the pattern
- 08:30 Changeset [13011] by
- use plt.figure.number instead of UniqueID, class UniqueID removed
03/07/12:
- 20:08 Changeset [13010] by
- Fixed the size of the received magic weather reports.
- 18:51 Changeset [13009] by
- Updated to latest changes.
- 18:49 Changeset [13008] by
- Scale the patch currents to pixle currents.
- 18:48 Changeset [13007] by
- Mini change to the hep output.
- 18:48 Changeset [13006] by
- Reformated the output to make it better fit the help2man conversion.
- 18:47 Changeset [13005] by
- Added some debug options; moved the PrintHelp at a better position so that exceptions wouldn't effect the output.
- 17:47 Changeset [13004] by
- Added new program fitscheck.
- 16:28 Changeset [13003] by
- Improved the possible combinations of how to extract the leading edge or position of maximum and the intgeral or amplitude.
- 16:27 Changeset [13002] by
- Propagate the weight and allow to calculate the difference of two camera.
- 16:25 Changeset [13001] by
- Added AddCamDifference and weights to some Add-functions.
- 14:23 Changeset [13000] by
- Fixed a few shadows of previous local
- 14:22 Changeset [12999] by
- Added DataWriteFits2
- 14:11 Changeset [12998] by
- Added out own FITS streamer to the list of possible file formats (5).
- 14:10 Changeset [12997] by
- Data writer using our own fits streamer class.
- 14:08 Changeset [12996] by
- Added automatic checksum checking.
- 14:08 Changeset [12995] by
- First version of a fits writer.
- 10:17 Changeset [12994] by
- Added the number of events to interpolate to the feedback commands; implemented an exponent of 1./1.6 for the global feedback
03/06/12:
- 22:52 Changeset [12993] by
- Fixed an issue with the console and shell selection.
03/05/12:
- 15:48 Changeset [12992] by
- added plotter.py
03/04/12:
- 09:48 Changeset [12991] by
- Added quality of service to Deviation
- 09:41 Changeset [12990] by
- Added dim service descriptions
03/02/12:
- 19:00 Changeset [12989] by
- Replaces status==0 but 0x100-3 (ERROR) instead of 99, leading to a state 102
03/01/12:
- 22:39 Changeset [12988] by
- fixed typo in mysql query
- 15:47 Changeset [12987] by
- next() fixed, filters removed
- 15:31 Changeset [12986] by
- generator now allows for more than one spike .... generator option string changedsvn diff extractor.py | colordiff ! so I had to change it in extractor as well... sorry
- 15:02 Changeset [12985] by
- removed check for pw-file, adapted check for modification time, added insert to new run table
- 15:01 Changeset [12984] by
- removed check for pw-file
- 14:46 Changeset [12983] by
- filters work now also in the case of: length = 0 ... they do nothing then
- 12:33 Changeset [12982] by
- renamed SignalGenerator.py to generator.py
- 12:32 Changeset [12981] by
- included test functions in __main__ and debugged a lot
- 11:41 Changeset [12980] by
- unified method to get dates to be processed
- 11:32 Changeset [12979] by
- small changes in logging
- 11:27 Changeset [12978] by
- not needed as job is done by FillAuxData.sh
- 08:29 Changeset [12977] by
- debugged wrong handling of option_str in __init__
- 08:14 Changeset [12976] by
- initial commit - test with ./SignalGenerator.py
02/29/12:
- 22:02 Changeset [12975] by
- added iterator to RawData, _test_iter function gives an example on usage, ./pyfact.py can be run directly
- 13:41 Changeset [12974] by
- adapted logpaths
- 13:41 Changeset [12973] by
- changed from nail to mail
- 13:16 Changeset [12972] by
- introduced usage of global logfile and function sendquery
- 13:15 Changeset [12971] by
- introduced usage of global logfile
- 12:39 Changeset [12970] by
- introduced usage of global logfile
- 12:30 Changeset [12969] by
- introduced logfile to get trace of fitsfile errors
- 11:08 Changeset [12968] by
- changed MAILTO
- 10:30 Changeset [12967] by
- Fixed some trivial compiler warnings.
- 10:13 Changeset [12966] by
- Added wind gusts to GUI.
- 10:09 Changeset [12965] by
- Added interpretation of 'WP' hoping that the interpretation to be the wind gusts is correct.
- 10:06 Changeset [12964] by
- Now used the common Main::execute approach to launch the program; implemented a dummy StateMachine class based on MainImp to allow this approach.
- 10:05 Changeset [12963] by
- Print jumps and labels help text; use a MessageImp for output now.
- 10:05 Changeset [12962] by
- Print jumps and labels help text
- 10:04 Changeset [12961] by
- Implementd jumps and labels
- 10:03 Changeset [12960] by
- Flush the buffer before the boot message is printed.
- 10:03 Changeset [12959] by
- Fixed a compiler warning about an unused variable.
- 10:03 Changeset [12958] by
- Removed obsolete include of Time.h
- 10:02 Changeset [12957] by
- 10:01 Changeset [12956] by
- To dfine the virtual Run() function a new class MainImp is used now instead of the full state machine class.
- 10:01 Changeset [12955] by
- Added include of boost/version.hpp removed obsolete forward class definition of StateMachineImo
- 10:00 Changeset [12954] by
- Added include of LocalControl.h
02/28/12:
- 18:29 Changeset [12953] by
- implemented correcto handling for 2D data arrays ... 3D will still fail.
- 17:51 Changeset [12952] by
- now it does at least compile...
- 17:43 Changeset [12951] by
- debugged interpolation of zero-x-ing time in class ZeroXing
- 17:38 Changeset [12950] by
- added drs_spikes.py: finds and removes double spikes, contains a small _test, not yet tested with real data
- 17:37 Changeset [12949] by
- initial commit. not even tested, but you can look at it :-)
- 17:37 Changeset [12948] by
- filters use the 1st sample as initial values, instead of zero.
02/27/12:
- 17:19 Changeset [12947] by
- added labels to plots in _test* of fir_filter.py
- 14:23 Changeset [12946] by
- Updated some log-messages; added RemoveSpikes2
- 14:21 Changeset [12945] by
- Some more improvements to FACT header printing.
- 14:19 Changeset [12944] by
- Added additional plots for slope in case of 'same' option
02/26/12:
- 12:46 Changeset [12943] by
- Implemented a root-mode which allows to use mathematical expressions instead of just column names.
02/24/12:
- 23:35 Changeset [12942] by
- GUI bug fix for negative array index
- 23:05 Changeset [12941] by
- Less digits deplayed in widgets
- 20:43 Changeset [12940] by
- History handling in Edd faster, improved drag and drop functionality, version of Edd for La Palma
- 10:00 Changeset [12939] by
- Should have been a check for fCameraVersion not fFormatVersion in Print
- 09:59 Changeset [12938] by
- Added missing intialization of fArrivalTime
- 09:57 Changeset [12937] by
- Added GetNightAsInt
Note:
See TracTimeline
for information about the timeline view.
