Timeline
07/11/13:
07/10/13:
- 19:03 Changeset [16952] by
- 18:59 Changeset [16951] by
- 18:48 Changeset [16950] by
- 18:37 Changeset [16949] by
- 18:20 Changeset [16948] by
- 16:59 Changeset [16947] by
- Updated the comments in calfactfits.h.
07/03/13:
07/02/13:
- 17:57 Changeset [16945] by
- 10:22 Changeset [16944] by
- Fixed FITS conformance issue for .fz files when numrows=0
06/30/13:
06/28/13:
- 14:32 Changeset [16941] by
- Moved the conversion from dac to volt to its own function - for later easier replacement of the calibration.
- 14:10 Changeset [16940] by
- Added a comment.
- 11:57 Changeset [16939] by
- got rid of over 1024 start cell values by adding modulo
06/27/13:
- 23:27 Changeset [16938] by
- Added begining and end of line to output.
- 22:21 Changeset [16937] by
- Some fixes for the display of command completion results; fixed the removal of double entries from the history; added Home and End to key bindings output
- 20:11 Changeset [16936] by
- Added a very simple command completion for java.
- 13:10 Changeset [16935] by
- god rid of ambiguous cast error
- 04:13 Changeset [16934] by
- 03:14 Changeset [16933] by
- 03:01 Changeset [16932] by
- 03:00 Changeset [16931] by
- 02:59 Changeset [16930] by
- 02:57 Changeset [16929] by
- 02:55 Changeset [16928] by
- 02:55 Changeset [16927] by
- 02:33 Changeset [16926] by
- 02:29 Changeset [16925] by
- 02:15 Changeset [16924] by
- 02:14 Changeset [16923] by
- 02:13 Changeset [16922] by
- 02:06 Changeset [16921] by
- 02:05 Changeset [16920] by
- 02:03 Changeset [16919] by
06/26/13:
- 20:30 Changeset [16918] by
- 18:05 Changeset [16917] by
- Some consistency... dorce update is the strongest call we have to update the prompt as far as I understand.
- 18:00 Changeset [16916] by
- Not only when the screen geometry changes, but also when the prompt change we have to go back to the beginning of the line and re-display the prompt, this is because readline cannot determine the size of the prompt well, because of the ascii control condes
- 03:08 Changeset [16915] by
- 03:04 Changeset [16914] by
- 03:00 Changeset [16913] by
- 02:55 Changeset [16912] by
06/25/13:
- 15:38 Changeset [16911] by
- 15:33 Changeset [16910] by
- 15:11 Changeset [16909] by
- 15:08 Changeset [16908] by
- 15:05 Changeset [16907] by
- 15:04 Changeset [16906] by
- 14:41 Changeset [16905] by
- 14:32 Changeset [16904] by
- 14:28 Changeset [16903] by
- 14:26 Changeset [16902] by
- 14:20 Changeset [16901] by
- 14:18 Changeset [16900] by
- 02:46 Changeset [16899] by
06/24/13:
- 16:04 Changeset [16898] by
- Propagated the new naming of enums to other files....
- 15:57 Changeset [16897] by
- Removed bytes swapping for RAWSUM
- 15:16 Changeset [16896] by
- Added RAWSUM calculation, merged fits.h
06/23/13:
- 09:57 Changeset [16895] by
- 09:54 Changeset [16894] by
- 00:10 Changeset [16893] by
- Fixed a typo, added the missing cast and removed also the MRawEvtData from the list to avoid confusion in MReadFitsFile when the size of the array is dtermined.
06/22/13:
- 16:48 Changeset [16892] by
- 16:47 Changeset [16891] by
- Added a check for underflows, for the case the gains are read as offsets... only for checking purpose.
- 16:28 Changeset [16890] by
- Consistency of member names
- 15:31 Changeset [16889] by
- Some cleaning to easier understand the code.
- 15:30 Changeset [16888] by
- Given proper names to the enums... we are not programming Fortran style anymore.
- 11:45 Changeset [16887] by
- Added some smoothing to the deviation responsible for the OnTrack/Tracking; allow a second auto resume after five seconds.
- 10:07 Changeset [16886] by
- Make sure no consietncy check is done for the last file.
06/21/13:
- 22:30 Changeset [16885] by
- Slightly modified appearance of log-stream.
- 22:29 Changeset [16884] by
- Fixed two compiler warnings.
- 22:29 Changeset [16883] by
- Fixed two typos.
- 17:08 Changeset [16882] by
- added correct checksum calculation for compressed fits reader (zfits)
- 16:05 Changeset [16881] by
- Replaced some loops with cout.write for better performance
- 16:02 Changeset [16880] by
- Redisplay has to check if this is an update due to change of terminal size. If this is the case the cursor must be moved back to the beginning of the line. For convenience we also clean the line (to remove the last charcter in the line, which (maybe fpor safty reason to avoid newlines) readline doesn't remove.
- 16:01 Changeset [16879] by
- Removed the newline before the prompt. That's were the problems with the display came from.
- 16:00 Changeset [16878] by
- Removed the obsolete check for 'use striut'
- 14:41 Changeset [16877] by
- Removed a stray debug output.
- 13:38 Changeset [16876] by
- removed wrong error tags in log files
06/20/13:
- 21:54 Changeset [16875] by
- Fixed an issue with the detection of the 'camera' argument.
- 21:54 Changeset [16874] by
- Direct the output in case of wrong states to the dim log.
- 05:02 Changeset [16873] by
06/19/13:
- 17:14 Changeset [16872] by
- Updated EventHook to match virtual function definition.
- 17:10 Changeset [16871] by
- Use a to_string instead of an ostringstream for conversion
- 17:09 Changeset [16870] by
- When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
- 17:09 Changeset [16869] by
- When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
- 13:14 Changeset [16868] by
- Added 'home' and 'end' key to fixed key bindings, this makes it work in screen. Updated the EventHook again. This version still gives some flicker on my laptop, but it works on La Palma and at least the line buffer doesn't jump.
- 12:47 Changeset [16867] by
- got rid of defines
- 11:21 Changeset [16866] by
- Removed the output of the ratescans to an ascii file. Sending it to the datalogger has proven to be stable.
- 11:20 Changeset [16865] by
- Increased the time to wait for the data of a ftm reply to a macroscopic time. There is no need to be picky about the receiving time and it can happen that other events in the queue are processed in between.
06/18/13:
- 15:58 Changeset [16864] by
- Fixed the twilight check
- 03:50 Changeset [16863] by
- bugfix for case histogram in star does not exist, update code for nightly files
06/17/13:
- 16:33 Changeset [16862] by
- Deleteing the line does not seem necessary anymore.
- 14:16 Changeset [16861] by
- Indentation cosmetics.
- 13:58 Changeset [16860] by
- Added 'use strict'
- 13:57 Changeset [16859] by
- Added 'use strict'
- 13:57 Changeset [16858] by
- Fixed a typo: Should be var, not int
- 13:57 Changeset [16857] by
- Added the 'use strict'
06/15/13:
- 19:14 Changeset [16856] by
- Forgot this one...
- 19:10 Changeset [16855] by
- Fixed a couple of issues including missing setting of badbit, broken returns and compilation with CINT, added some const qualifiers
- 18:18 Changeset [16854] by
- The length of the bytes released must be converted from short to bytes.
- 18:11 Changeset [16853] by
- Replaced some console.out by dim.log; take only 1min runs during twilight conditions; added some code to properly print the next observation, also when it is changed in the db; improved some output.
- 18:08 Changeset [16852] by
- Some changes to the output, replaced some console.out by dim.log
- 18:08 Changeset [16851] by
- Changed underflow level from 650 to 600; replaced some console.out by dim.log
- 04:45 Changeset [16850] by
- fixed bug in getting source name from drive file
Note:
See TracTimeline
for information about the timeline view.
