Timeline



07/19/13:

12:55 Changeset [16967] by tbretz
Updated new feedback algorithm.
12:50 Changeset [16966] by tbretz
Changed sign of the offset, so that the offset/slope combination represents a line in volt-vs-dac, added slope.
12:49 Changeset [16965] by tbretz
Added the slope to the channel calibration (conversion from dac counts to voltage and vice versa); added slope to dim service; round the dac counts instead of cutting the remainder
09:07 Changeset [16964] by lyard
replaced fits with fact fits to be able to read compressed files

07/18/13:

13:18 Changeset [16963] by tbretz
Added ln_get_angular_separation.
13:17 Changeset [16962] by tbretz
Added GetAngularSeparation
13:10 Changeset [16961] by tbretz
Fixed a typo in the program option descriptions.
13:10 Changeset [16960] by tbretz
Renamed Seeing to SeeingMed, added SeeingStdev and Solarimeter
13:10 Changeset [16959] by tbretz
Use ::tolower instead of this compilcated cast construction.
13:09 Changeset [16958] by tbretz
Made StartConnection virtual to allow ConnectionGCN to change the IP address with every connect.
13:09 Changeset [16957] by tbretz
Removed the need for the Soprano library, we are using the Qt-classes instead now. Added gcn to the list of programs to be compiles. Removed the linking of QtWebKit, it is not needed.
13:05 Changeset [16956] by tbretz
Added a check that the new night-as-int is never decreased; improved log output.
13:02 Changeset [16955] by tbretz
Removed the need for the Soprano library, fixed the units in the reports, added solarimeter measurements and updates the seeing to seeing median and stdev.
13:01 Changeset [16954] by tbretz

07/16/13:

23:35 DataTakingMainPage edited by ftemme
(diff)
23:34 DataTakingMainPage edited by ftemme
(diff)
23:21 DataTakingMainPage edited by ftemme
(diff)
23:19 DataTakingMainPage edited by ftemme
(diff)
23:14 DataTakingMainPage edited by ftemme
(diff)
23:14 ScheduleTemplate created by ftemme
23:13 ScreenSessionHelpfulCommands edited by ftemme
(diff)
23:11 ScreenSessionHelpfulCommands created by ftemme
23:02 DataTakingMainPage edited by ftemme
(diff)
23:00 TemplateQuotingLogFiles edited by ftemme
(diff)
23:00 TemplateQuotingLogFiles created by ftemme
22:58 DataTakingMainPage edited by ftemme
(diff)
22:57 DataTakingMainPage edited by ftemme
(diff)
22:57 DataTakingMainPage edited by ftemme
(diff)
22:57 TemplateNormalDatatakingSet created by ftemme
22:55 DataTakingMainPage edited by ftemme
(diff)
22:55 TemplateShiftSummary created by ftemme
22:46 DataTakingCheckList edited by ftemme
(diff)
22:37 DataTakingCheckList created by ftemme
22:30 DataTakingMainPage edited by ftemme
(diff)
22:08 DataTakingMainPage created by ftemme
22:07 WikiStart edited by ftemme
(diff)

07/11/13:

02:36 Changeset [16953] by tanio

07/10/13:

19:03 Changeset [16952] by tanio
18:59 Changeset [16951] by tanio
18:48 Changeset [16950] by tanio
18:37 Changeset [16949] by tanio
18:20 Changeset [16948] by tanio
16:59 Changeset [16947] by kraehenb
Updated the comments in calfactfits.h.

07/03/13:

17:47 Changeset [16946] by tanio

07/02/13:

17:57 Changeset [16945] by tanio
10:22 Changeset [16944] by lyard
Fixed FITS conformance issue for .fz files when numrows=0

06/30/13:

03:23 Changeset [16943] by tanio
03:22 Changeset [16942] by tanio

06/28/13:

14:32 Changeset [16941] by tbretz
Moved the conversion from dac to volt to its own function - for later easier replacement of the calibration.
14:10 Changeset [16940] by tbretz
Added a comment.
11:57 Changeset [16939] by lyard
got rid of over 1024 start cell values by adding modulo

06/27/13:

23:27 Changeset [16938] by tbretz
Added begining and end of line to output.
22:21 Changeset [16937] by tbretz
Some fixes for the display of command completion results; fixed the removal of double entries from the history; added Home and End to key bindings output
20:11 Changeset [16936] by tbretz
Added a very simple command completion for java.
13:10 Changeset [16935] by lyard
god rid of ambiguous cast error
04:13 Changeset [16934] by tanio
03:14 Changeset [16933] by tanio
03:01 Changeset [16932] by tanio
03:00 Changeset [16931] by tanio
02:59 Changeset [16930] by tanio
02:57 Changeset [16929] by tanio
02:55 Changeset [16928] by tanio
02:55 Changeset [16927] by tanio
02:33 Changeset [16926] by tanio
02:29 Changeset [16925] by tanio
02:15 Changeset [16924] by tanio
02:14 Changeset [16923] by tanio
02:13 Changeset [16922] by tanio
02:06 Changeset [16921] by tanio
02:05 Changeset [16920] by tanio
02:03 Changeset [16919] by tanio

06/26/13:

20:30 Changeset [16918] by tanio
18:05 Changeset [16917] by tbretz
Some consistency... dorce update is the strongest call we have to update the prompt as far as I understand.
18:00 Changeset [16916] by tbretz
Not only when the screen geometry changes, but also when the prompt change we have to go back to the beginning of the line and re-display the prompt, this is because readline cannot determine the size of the prompt well, because of the ascii control condes
03:08 Changeset [16915] by tanio
03:04 Changeset [16914] by tanio
03:00 Changeset [16913] by tanio
02:55 Changeset [16912] by tanio

06/25/13:

15:38 Changeset [16911] by tanio
15:33 Changeset [16910] by tanio
15:11 Changeset [16909] by tanio
15:08 Changeset [16908] by tanio
15:05 Changeset [16907] by tanio
15:04 Changeset [16906] by tanio
14:41 Changeset [16905] by tanio
14:32 Changeset [16904] by tanio
14:28 Changeset [16903] by tanio
14:26 Changeset [16902] by tanio
14:20 Changeset [16901] by tanio
14:18 Changeset [16900] by tanio
02:46 Changeset [16899] by tanio

06/24/13:

16:04 Changeset [16898] by lyard
Propagated the new naming of enums to other files....
15:57 Changeset [16897] by lyard
Removed bytes swapping for RAWSUM
15:16 Changeset [16896] by lyard
Added RAWSUM calculation, merged fits.h

06/23/13:

09:57 Changeset [16895] by tanio
09:54 Changeset [16894] by tanio
00:10 Changeset [16893] by tbretz
Fixed a typo, added the missing cast and removed also the MRawEvtData from the list to avoid confusion in MReadFitsFile when the size of the array is dtermined.

06/22/13:

16:48 Changeset [16892] by tbretz
16:47 Changeset [16891] by tbretz
Added a check for underflows, for the case the gains are read as offsets... only for checking purpose.
16:28 Changeset [16890] by tbretz
Consistency of member names
15:31 Changeset [16889] by tbretz
Some cleaning to easier understand the code.
15:30 Changeset [16888] by tbretz
Given proper names to the enums... we are not programming Fortran style anymore.
11:45 Changeset [16887] by tbretz
Added some smoothing to the deviation responsible for the OnTrack/Tracking; allow a second auto resume after five seconds.
10:07 Changeset [16886] by tbretz
Make sure no consietncy check is done for the last file.

06/21/13:

22:30 Changeset [16885] by tbretz
Slightly modified appearance of log-stream.
22:29 Changeset [16884] by tbretz
Fixed two compiler warnings.
22:29 Changeset [16883] by tbretz
Fixed two typos.
17:08 Changeset [16882] by lyard
added correct checksum calculation for compressed fits reader (zfits)
16:05 Changeset [16881] by tbretz
Replaced some loops with cout.write for better performance
16:02 Changeset [16880] by tbretz
Redisplay has to check if this is an update due to change of terminal size. If this is the case the cursor must be moved back to the beginning of the line. For convenience we also clean the line (to remove the last charcter in the line, which (maybe fpor safty reason to avoid newlines) readline doesn't remove.
16:01 Changeset [16879] by tbretz
Removed the newline before the prompt. That's were the problems with the display came from.
16:00 Changeset [16878] by tbretz
Removed the obsolete check for 'use striut'
14:41 Changeset [16877] by tbretz
Removed a stray debug output.
13:38 Changeset [16876] by lyard
removed wrong error tags in log files

06/20/13:

21:54 Changeset [16875] by tbretz
Fixed an issue with the detection of the 'camera' argument.
21:54 Changeset [16874] by tbretz
Direct the output in case of wrong states to the dim log.
05:02 Changeset [16873] by tanio

06/19/13:

17:14 Changeset [16872] by tbretz
Updated EventHook to match virtual function definition.
17:10 Changeset [16871] by tbretz
Use a to_string instead of an ostringstream for conversion
17:09 Changeset [16870] by tbretz
When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
17:09 Changeset [16869] by tbretz
When we output something ourselves before the event hook is called in readline, we have to signal readline that we have started a new row, so that readline can properly update the prompt. I hope this finally solves the flickering issue on my laptop and/or the problematic display in the fadctrl.
13:14 Changeset [16868] by tbretz
Added 'home' and 'end' key to fixed key bindings, this makes it work in screen. Updated the EventHook again. This version still gives some flicker on my laptop, but it works on La Palma and at least the line buffer doesn't jump.
12:47 Changeset [16867] by lyard
got rid of defines
11:21 Changeset [16866] by tbretz
Removed the output of the ratescans to an ascii file. Sending it to the datalogger has proven to be stable.
11:20 Changeset [16865] by tbretz
Increased the time to wait for the data of a ftm reply to a macroscopic time. There is no need to be picky about the receiving time and it can happen that other events in the queue are processed in between.
Note: See TracTimeline for information about the timeline view.