Timeline
03/31/14:
- 16:16 Changeset [17640] by
- Implemented an outomatic voltage off at sunrise
- 16:14 Changeset [17639] by
- Replaced define by enum.
- 16:13 Changeset [17638] by
- Allow ir interruption during ovtest, updated shutdown message.
- 16:12 Changeset [17637] by
- Catch when a DRS calibration could not be restored.
03/27/14:
- 16:11 Changeset [17636] by
- Simplified the code to read from the socket; some more cosmitcs and simplifications; increased precision of voltage calculation; added counter to track the broken messages
03/18/14:
- 16:34 Changeset [17635] by
- new FSC firmware binary file
- 16:33 Changeset [17634] by
- new FSC firmware version without any ASCII parsing and fancy stuff. Introduced: binary output checksums
- 16:31 Changeset [17633] by
- a lot of whitespace changes and removed unneeded includes
- 16:30 Changeset [17632] by
- whitespace changes, using global register
- 16:26 Changeset [17631] by
- removed use of usart
- 16:25 Changeset [17630] by
- mostly whitespace changes and removed the use of the usart
- 16:23 Changeset [17629] by
- a lot of changes for the new firmware version. Mostly the global registers were changed
- 16:21 Changeset [17628] by
- many whitespace edits, and removed usart.h from includelist
- 16:19 Changeset [17627] by
- whitepace edit
- 16:18 Changeset [17626] by
- deleted a lot of stuff, that is actually not needed
- 16:15 Changeset [17625] by
- initial commit. Can be used to build also on linux, but actually, the real hex-file is still built on Windows using the compiler, that comes with AVR Studio4
- 15:50 Changeset [17624] by
- introduced POD which describes FSC binary output format
- 15:49 Changeset [17623] by
- adapted for new firmware version no ASCII parsing needed, so this was removed. FSC sends now fixed length messages, so messages are processed as soon as a certain number of bytes is received. No command needs to be sent to start the reporting. While processing the messages, two checksums are computed and compaired against the received data.
03/17/14:
- 13:35 Changeset [17622] by
- adapted times to be faster informed about full disks
- 13:23 Changeset [17621] by
- adapted times to be faster informed about full disks
- 13:19 Changeset [17620] by
- adapted times to be faster informed about full disks
- 13:18 Changeset [17619] by
- improved logging in case of full disk
- 12:40 Changeset [17618] by
- improved logging, re-enabled check if script is already running
- 12:38 Changeset [17617] by
- improved logging in case of full disk
03/16/14:
- 23:47 Changeset [17616] by
- added DISK tag to logging, improved logging, added certaindate and short as environment variables
- 23:45 Changeset [17615] by
- added sending email in case there were warnings about full disks
- 23:44 Changeset [17614] by
- added DISK tag to logging
- 23:44 Changeset [17613] by
- added DISK tag to logging
- 23:42 Changeset [17612] by
- added check for full disk - at 100GB transfer is stopped
- 23:42 Changeset [17611] by
- added cron for FillAuxCamHum.sh
- 23:41 Changeset [17610] by
- added (script to fill humidity in camera)
- 23:40 Changeset [17609] by
- added email-adress for full-disk-alerts
03/14/14:
- 21:03 Changeset [17608] by
- Updated warning levels, set lower limit of graph to -15deg
03/12/14:
- 14:34 Changeset [17607] by
- Fixed bug that wrongly calculated the checksum of compressed files. Weird that I did not notice it ealier...
03/11/14:
03/09/14:
- 16:28 Changeset [17605] by
- Added dew point
03/08/14:
- 19:01 Changeset [17604] by
- Start scaling the plot at 0deg
- 18:56 Changeset [17603] by
- Added magic ambient temperature
03/04/14:
- 22:26 Changeset [17602] by
- complete rewriting of the page to take into account people changing institutes
- 22:07 Changeset [17601] by
- fixed a small bug in the calculation of the shares
- 00:47 Changeset [17600] by
- added documentation
- 00:47 Changeset [17599] by
- added evaluation of shift duties (so far not taking into account institute changes of members)
03/02/14:
- 14:01 Changeset [17598] by
- removed filling of outside temperatur (done in FillAuxTemp.sh), fixed check whether data was already filled
- 13:41 Changeset [17597] by
- give warning about missing files only when runinfo in DB available
- 12:50 Changeset [17596] by
- give warning about missing files only when rawdata available
- 12:33 Changeset [17595] by
- fixed typo
- 01:20 Changeset [17594] by
- changed logging for connection problems
- 01:08 Changeset [17593] by
- changed to hourly checking and added special case for connection problems
- 00:37 Changeset [17592] by
- fixed column name fRunID
- 00:36 Changeset [17591] by
- added plots for period of 1 month
- 00:35 Changeset [17590] by
- added copying of already compressed files
- 00:27 Changeset [17589] by
- added check if rsync worked
- 00:21 Changeset [17588] by
- added current limit
- 00:20 Changeset [17587] by
- implemented usage of variable certaindate, implemented check for cases that data are deleted in wrong order, added regexp to search for file list
- 00:12 Changeset [17586] by
- added cron for filling container temperature
- 00:06 Changeset [17585] by
- implemented fz
- 00:06 Changeset [17584] by
- implemented fz
- 00:05 Changeset [17583] by
- implemented fz
- 00:05 Changeset [17582] by
- implemented fz
- 00:03 Changeset [17581] by
- implemented fz
- 00:03 Changeset [17580] by
- implemented fz
- 00:02 Changeset [17579] by
- implemented fz
- 00:02 Changeset [17578] by
- implemented fz
- 00:00 Changeset [17577] by
- added (script to fill container temperature)
03/01/14:
- 23:59 Changeset [17576] by
- added feature to run script manually for a certain night, added check if file at isdc exists
- 23:57 Changeset [17575] by
- updated path to qla at isdc
- 23:56 Changeset [17574] by
- added rsync of drs-file to avoid failing callistos
- 23:46 Changeset [17573] by
- implemented usage of getdates function
- 23:45 Changeset [17572] by
- added crons to check performance of system
- 23:43 Changeset [17571] by
- usage of new Mars version
- 23:41 Changeset [17570] by
- updated output with qlainfo, implemented fz files, following links in the archive for finding files, added check to allow only one script running
Note:
See TracTimeline
for information about the timeline view.