Timeline
08/31/11:
- 16:56 Changeset [11930] by
- Added a comment.
- 16:56 Changeset [11929] by
- Use the new enum for the first free user state to define the states.
- 16:55 Changeset [11928] by
- Added a enum defining the first available user state.
- 16:54 Changeset [11927] by
- Added the latest changes so that the whole control should become more robust and should disconnect whenever something goes wrong; added ramping and other features.
- 16:53 Changeset [11926] by
- Adapted Bias control stuff to the changes in the GUI; mainly added the didplay of voltages.
- 16:53 Changeset [11925] by
- Updated Bias control stuff, especially removed the sending of commands for the moment.
- 16:52 Changeset [11924] by
- Updated Bias tab mainly with a second display for the voltages.
- 16:46 Changeset [11923] by
- Possibility to switch highlighting off was missing.
- 15:42 Changeset [11922] by
- various Daniela suggestions and improvements
- 15:13 Changeset [11921] by
- Added a second argument to AsyncRead to be able to propagate a counter; for the moment switched DEBUG_TX on; only try to close the connection if it is not open
- 14:42 Changeset [11920] by
- forgot the .h
08/30/11:
- 15:16 Changeset [11919] by
- Added simple bias current calibration
- 15:00 Changeset [11918] by
- removed wavelet display (was private debug only)
- 13:52 Changeset [11917] by
- Added pixels 1438 and 1439
- 10:36 Changeset [11916] by
- Removed some obsolete include.
08/26/11:
- 09:47 Changeset [11915] by
- Ramping also for decreasing voltage
08/25/11:
- 16:49 Changeset [11914] by
- removed cout
- 16:22 Changeset [11913] by
- added time display
- 11:06 Changeset [11912] by
- changed column header display
08/24/11:
- 15:14 Changeset [11911] by
- moved fitsdump from interactive to command line
08/23/11:
- 12:09 Changeset [11910] by
- added vector columns dump
08/18/11:
- 14:23 Changeset [11909] by
- Another fix for the DRS calibration.
- 14:22 Changeset [11908] by
- Fixed some limits and changed stepping for color scale.
08/16/11:
- 11:53 Changeset [11907] by
- added spinners for slices and events
08/15/11:
- 17:01 Changeset [11906] by
- Added voltage and system reset rate limit
08/13/11:
- 13:19 Changeset [11905] by
- Improved output of PrintKeys and PrintColumns
- 13:09 Changeset [11904] by
- Corrected unit from V to mV
08/12/11:
- 21:24 Changeset [11903] by
- Updated what is needed to compiule the viewer.
- 21:21 Changeset [11902] by
- Fixed the calibration subtraction.
- 16:23 Changeset [11901] by
- many changes...
- 13:51 Changeset [11900] by
- Made the viewer work also with older raw data files.
- 13:15 Changeset [11899] by
- updated corsika version, bugfix for diskusage, writing permission for group
- 11:28 Changeset [11898] by
- oops forgot the header file...
- 11:12 Changeset [11897] by
- fixed calibrated data display
- 10:26 Changeset [11896] by
- Added mcore to path.
- 09:47 Changeset [11895] by
- Latest one socket version with a fix to stop buffering data after the requested number of events.
- 08:38 Changeset [11894] by
- added anti-aliasing
08/11/11:
- 23:09 Changeset [11893] by
- Implemented a new determination fo run-number after noon in the fadctrl; created the possibility to add the date to the raw-data path; allow to set the path as program option; for all this moved some code from the datalogger to DimWriteStatistics
- 21:06 Changeset [11892] by
- Removed old dummy code for the DRS calibration.
- 21:05 Changeset [11891] by
- Removed an obsolete comment block.
- 21:05 Changeset [11890] by
- Added how to decode the trigger type.
- 21:04 Changeset [11889] by
- Removed some obsolete comment blocks.
- 21:04 Changeset [11888] by
- Added decoding of the trigger type.
- 21:04 Changeset [11887] by
- Removed obsolete comments.
- 21:03 Changeset [11886] by
- Do not write stuff which is not yet defined.
- 21:02 Changeset [11885] by
- Added NPIx and NROI
- 21:01 Changeset [11884] by
- Added title and units for the camera displays; implemented display of the physcial pipeline in the ADC tab
- 21:00 Changeset [11883] by
- Added some bias controls.
- 21:00 Changeset [11882] by
- Added pixel to switch ADC display to the physical pipeline.
- 16:35 Changeset [11881] by
- Updated to DIM V19r24
- 10:39 Changeset [11880] by
- oops
- 10:39 Changeset [11879] by
- few changes
- 10:36 Changeset [11878] by
- added more features
08/10/11:
- 16:48 Changeset [11877] by
- fixed autoscale and median bugs
- 16:33 Changeset [11876] by
- fixed autoscale and median bugs
- 14:56 Changeset [11875] by
- degree character utf16 fixed
- 14:41 Changeset [11874] by
- added various features
08/09/11:
- 23:58 Changeset [11873] by
- Added mcore to include path
- 23:56 Changeset [11872] by
- Made sure that izstream and fits are in the dictionary
- 23:55 Changeset [11871] by
- added the possibility to read the pixel map from a file
- 23:53 Changeset [11870] by
- When setting a pixel map in the event data subtract one to get from the id to the index.
- 23:52 Changeset [11869] by
- Implemented the possibility to set the pixel map in the run-header when initializing for fact data.
- 20:16 Changeset [11868] by
- Two voltages need scaling by 2
- 20:15 Changeset [11867] by
- SetPtrAddress takes the number of elements not the number of bytes.
- 20:07 Changeset [11866] by
- Replaced fPixelMapHW by fPixelMap
- 17:23 Changeset [11865] by
- added coloured selected patch and a first preliminary text drawing
- 16:58 Changeset [11864] by
- Fixed some scaling issues which came up with the scale removed in Apply
- 16:52 Changeset [11863] by
- adapted paths for new production
- 16:52 Changeset [11862] by
- added observation level and moon
- 16:09 Changeset [11861] by
- bug fix
- 14:49 Changeset [11860] by
- Implemented reading referencevoltages from file -- preliminary.
- 14:49 Changeset [11859] by
- Implemented SetRef and Set0 button for Bias.
- 14:20 Changeset [11858] by
- More updates... added new function... restructured functions, etc.
- 14:17 Changeset [11857] by
- Updates of some naming; implemented Bias control communication.
- 14:16 Changeset [11856] by
- Added LED for Bias ctrl and for over current.
- 13:54 Changeset [11855] by
- Finalized the BIAS display.
- 10:01 Changeset [11854] by
- Added the Bias control to the GUI; consequently, updated the rate display functions -- to be unified.
- 00:05 Changeset [11853] by
- Added the 'lost' 1000 event number.
- 00:03 Changeset [11852] by
- This is the first step to get a working and stable Bias control.
- 00:02 Changeset [11851] by
- undef DEBUG_TX -- it seems to work stable.
08/08/11:
- 19:40 Changeset [11850] by
- Added the possibility to switch off the drs calibration display - does only work yet in case of update of the service.
- 17:28 Changeset [11849] by
- small fixes
- 17:03 Changeset [11848] by
- added (two scripts checking the status of the network card and the time of the machines; crontab files for all 4 machines)
- 15:56 Changeset [11847] by
- Implemented display of FSC values.
- 15:49 Changeset [11846] by
- Convert from milli to Volt and Amp
- 14:58 Changeset [11845] by
- Some minor bug fixes to get the latest changes working.
- 11:24 Changeset [11844] by
- Updated path to DrsCalib.h
- 11:18 Changeset [11843] by
- 10:46 Changeset [11842] by
- adapted to allow backup of defined databases
- 10:45 Changeset [11841] by
- added (setup for processing in La Palma)
08/07/11:
- 18:45 Changeset [11840] by
- Added default options for run-type, run-time and run-count
- 18:44 Changeset [11839] by
- Changed START_RUN service to provide the current run-number (whethe ropen or not) and the next run-number.
- 18:43 Changeset [11838] by
- make sure that the Closed-message is displayed only once for raw-data.
- 18:43 Changeset [11837] by
- Changed Dim services to ensure they send the time.
- 18:40 Changeset [11836] by
- Added the Aux tab with the widgets for FSC data display.
- 17:49 Changeset [11835] by
- Fixed a bug in a format string.
- 17:47 Changeset [11834] by
- Updated sending DIM services.
- 16:53 Changeset [11833] by
- Fixed a few typos.
- 16:44 Changeset [11832] by
- Set fProcessing back as late as possible
- 16:42 Changeset [11831] by
- Changed the Apply function to avoid too high numbers; little improvements to GetPixelStats
- 16:40 Changeset [11830] by
- Added keys for ADC resolution and ADC range
- 16:36 Changeset [11829] by
- Improved writing; fixed reading of drs-calibration file.
08/06/11:
- 19:59 Changeset [11828] by
- Added a missing data member.
- 19:45 Changeset [11827] by
- Some fine tuning.
- 19:45 Changeset [11826] by
- Fixed service size for START_RUN
- 19:09 Changeset [11825] by
- Configure possible run lengths etc. from program options.
- 18:34 Changeset [11824] by
- Display some statistics in the FAD tab with th ehelp of current-run/next-run from the fadctrl -- in the way the users gets the most important infomration of what is going on.
- 17:53 Changeset [11823] by
- Do not display rates if the corresponding FTU is switched off.
- 17:16 Changeset [11822] by
- Updated to latest changes in dependencies.
- 16:54 Changeset [11821] by
- Added diff of externals to diff target.
- 16:53 Changeset [11820] by
- Display run-numbers of currently applied DRS calibration.
- 16:38 Changeset [11819] by
- Added code for eventCheck; added command to load a DRS calibration file.
- 16:38 Changeset [11818] by
- Added ReadFits.
- 16:37 Changeset [11817] by
- Added command to load a DRS calibration.
- 16:14 Changeset [11816] by
- 16:11 Changeset [11815] by
- 16:11 Changeset [11814] by
- Removed izstream.h and fits.h
- 16:10 Changeset [11813] by
- Added new directory mcore.
- 16:05 Changeset [11812] by
- Removed a stray debug output.
- 16:05 Changeset [11811] by
- Added reading of FITS files.
- 16:05 Changeset [11810] by
- Added reading of FITS files.
- 16:05 Changeset [11809] by
- Updated include of fits.h
- 16:04 Changeset [11808] by
- Updated to account for the new svn:externals which directly checks mcore out of Mars.
- 16:04 Changeset [11807] by
- Moved signals for fRatesMin/fRatesMax to MainWindow -- they don't depend on root anymore.
- 15:57 Changeset [11806] by
- 11:05 Changeset [11805] by
- Fixed a wrong spelling.
08/05/11:
- 23:02 Changeset [11804] by
- Replaced a rounded value for the hex coordinates by the analytical value.
- 22:48 Changeset [11803] by
- Fixed text displayed in CameraMouseMove
- 21:27 Changeset [11802] by
- Added persistant raw data display mode.
- 18:44 Changeset [11801] by
- hex: v214; dec: v220. FAD operates with socket 0 and 1 only. (TX MEM 60kb)
- 16:39 Changeset [11800] by
- removed echo of ethernat command 'm'
- 16:33 Changeset [11799] by
- removed the emitting cout
- 16:26 Changeset [11798] by
- Reordered some code to get rid of some root warnings.
- 16:26 Changeset [11797] by
- Changed the name of the tab 'Page'; fixed warning in promotion of the new widgets.
- 16:19 Changeset [11796] by
- added tooltip for all cameras
- 16:00 Changeset [11795] by
- debugged channel 0 bug.
- 15:09 Changeset [11794] by
- Fixed the division by fPrescaling when calculating the rates.
- 15:08 Changeset [11793] by
- Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
- 15:08 Changeset [11792] by
- Added new GUI classes to be compiled -- still needs a proper check for GL/GLU
- 15:07 Changeset [11791] by
- Added 'light-puler' run-type.
- 15:07 Changeset [11790] by
- Fixed an FTU-GUI ping pong
- 14:19 Changeset [11789] by
- test to get rid of voltage channel 0 error.
- 14:12 Changeset [11788] by
- multiple changes ... chaos.
- 14:10 Changeset [11787] by
- set W5300 SPI clock freq to F_CPU/128. Since sometimes the W5300 interface seems not to work, when the Programming adapter is connected to the camere, this *might* help.
- 14:08 Changeset [11786] by
- added update of display when data changed
- 13:48 Changeset [11785] by
- the previous bug fix was not quite a fix ;)
- 13:32 Changeset [11784] by
- Fixed settings for light pulser.
- 13:24 Changeset [11783] by
- fixed a bug with the GL camera
- 13:07 Changeset [11782] by
- replaced the 4 roots cameras by 4 GL ones
- 12:27 Changeset [11781] by
- Default voltages now given per bias channel
- 12:07 Changeset [11780] by
- small changes in buttons and pulldown layout
- 10:47 Changeset [11779] by
- Replaced root camera by openGL camera in the gui
08/04/11:
- 20:51 Changeset [11778] by
- Decrease update frequency for Event display; Set a better maximum for the raw data display.
- 20:07 Changeset [11777] by
- Added options to set N/4 threshold; renamed options for thresholds.
- 20:06 Changeset [11776] by
- Reformating of the clock conditioner values.
- 18:28 Changeset [11775] by
- Added some more user commands.
- 18:25 Changeset [11774] by
- Fixed the default for fNumGain
- 13:23 Changeset [11773] by
- Fix for reset button detection
- 12:44 Changeset [11772] by
- Added 'info' option for 'pixel' and 'channel' commands
- 11:20 Changeset [11771] by
- key2 can be empty now
- 09:09 Changeset [11770] by
- removed bug in nc_format. wrongly used pointer to piinter nc_format_buffer.
08/03/11:
- 22:06 Changeset [11769] by
- Throw exceptions with text; do not use stoi otherwise we have to catch the exception.
- 22:05 Changeset [11768] by
- Send the 2000/4096 also as default gain.
- 22:04 Changeset [11767] by
- Apply the correct 2000/4096 also as default gain.
- 21:00 Changeset [11766] by
- Latest changes.
- 20:16 Changeset [11765] by
- Fixed the missing color for the horizontal histograms in the Raw data tab.
- 20:16 Changeset [11764] by
- Fixed the missing color for the horizontal histograms in the Raw data tab.
- 20:02 Changeset [11763] by
- Fixed the broken format of STATIC_DATA
- 19:58 Changeset [11762] by
- Sanity check for fInHandler when sending new light pulser intensity
- 19:57 Changeset [11761] by
- Fixed the light pulser control (DimStaticData)
- 19:06 Changeset [11760] by
- Print light pulser settings.
- 18:18 Changeset [11759] by
- Added new DATA_EVENT display.
- 18:17 Changeset [11758] by
- Renamed EVENT_DATA to RAW_EVENT; added new EVENT_DATA
- 18:14 Changeset [11757] by
- version 0x02.13: send data via socket 1 only. sockets 2..7 should be open as usual.
- 18:02 Changeset [11756] by
- bitfiles are now versioned as well
- 17:51 Changeset [11755] by
- reinit of this svn repos .... it was all too messy deleted the old folders and restarted with FACT_FAD_lib only. (well and the testbenches)
- 15:07 Changeset [11754] by
- Added GetPixelStats and changed type of scalerel from uint32 to uint64
- 14:21 Changeset [11753] by
- added display of calibrated data
- 10:18 Changeset [11752] by
- Changed artificial 0.5 to corect scale 2000/4096
08/02/11:
- 20:49 Changeset [11751] by
- Added the missing factor 0.5 to convert ADC counts to rough mV
- 20:34 Changeset [11750] by
- Added Errors in EVENT header.
- 20:32 Changeset [11749] by
- Removed some stray output.
- 20:32 Changeset [11748] by
- Latest updates.
- 20:32 Changeset [11747] by
- Added runNr to eventCheck; added stub for subProcEvt
- 20:23 Changeset [11746] by
- Removed some stray debug output.
- 20:23 Changeset [11745] by
- Changed some argument types to match the huge range needed by the gain and the secondary baseline.
- 20:21 Changeset [11744] by
- Set fNumRows to 0 in OpenFile; added ResetColumns function
- 20:20 Changeset [11743] by
- Initialize fConv to 0.
- 20:20 Changeset [11742] by
- changed some variable types to match the big range needed for the gain and secondary baseline.
- 20:19 Changeset [11741] by
- Fixed scale for gain and secondaroy offset; increase fStep after Close(); changed some variable types to match the big range needed for the gain and secondary baseline.
- 15:43 Changeset [11740] by
- improved zooming and bug fix of raw events viewer
- 15:05 Changeset [11739] by
- Fixed Dim format for STATIC_DATA
- 14:47 Changeset [11738] by
Note:
See TracTimeline
for information about the timeline view.
