Timeline
09/28/11:
- 16:54 Changeset [12156] by
- improved update of curves
- 16:27 Changeset [12155] by
- changed calibrated view
- 16:26 Changeset [12154] by
- changed calibrated view
- 16:20 Changeset [12153] by
- removed the text display
- 16:14 Changeset [12152] by
- changed from v5 to 5a
- 16:12 Changeset [12151] by
- removed pixelMap static def
- 14:44 Changeset [12150] by
- bug fix - fitsdump
- 14:41 Changeset [12149] by
- bug fix - fitsdump
09/26/11:
- 14:55 Changeset [12148] by
- Added writing of more information into header.
09/21/11:
- 17:24 Changeset [12147] by
- Now ARDUINO_FTDI can work like the former UM245R FIFO
- 12:19 Changeset [12146] by
- added a comment about the sleep(2) in HVBoard::Comminicate , that is a TODO
- 12:13 Changeset [12145] by
- arduino text output is scanned for '\0' which are excahnged by '0', otherwise output is truncated...
- 12:08 Changeset [12144] by
- Rename of MC_Arduino to ARDUINO_FTDI
- 12:00 Changeset [12143] by
- Arduinocode for Arduino-Microcontroller to communicate with PLD
- 11:57 Changeset [12142] by
- Arduino code for fake PLD arduino
- 11:44 Changeset [12141] by
- added some comments and beautified the welcome message
- 11:35 Changeset [12140] by
- removed binary
- 11:33 Changeset [12139] by
- initial commit
- 09:54 Changeset [12138] by
- doofe testaenderung rueckgaengig gemacht
- 09:48 Changeset [12137] by
- ja das war nur ein test
09/17/11:
- 19:50 Changeset [12136] by
- Switched the enable/disable of the bias widget on again.
- 17:27 Changeset [12135] by
- Some little changed to layout hints in the Bias tab
- 15:09 Changeset [12134] by
- Another improvement to the mouse tracking
- 15:08 Changeset [12133] by
- Another improvement to the mouse tracking
- 14:45 Changeset [12132] by
- Removed a spurious debug output.
- 14:45 Changeset [12131] by
- Updated for which cameras the cursors are shown.
- 09:40 Changeset [12130] by
- Improved exception output.
- 09:40 Changeset [12129] by
- Improved exception output.
- 09:39 Changeset [12128] by
- Made pritning of event more compatible with help2man
- 09:39 Changeset [12127] by
- Made --help output more compatible with help2man
- 09:39 Changeset [12126] by
- Made --help output more compatible with help2man.
- 09:38 Changeset [12125] by
- Made the empty description for SET_PRESCALING really empty.
- 09:37 Changeset [12124] by
- Added green bar/check/warn
- 09:36 Changeset [12123] by
- Some convenience updates.
- 09:34 Changeset [12122] by
- turned off autoShine of pixel/patches by default
09/16/11:
- 22:24 Changeset [12121] by
- Some more small improvements and fixes to status, camera displays and others.
- 21:14 Changeset [12120] by
- changed action taken when stopping run (not closing files yet)
- 20:32 Changeset [12119] by
- fixed bug
- 20:02 Changeset [12118] by
- forgot to set the time
- 19:54 Changeset [12117] by
- added a first entry to the run numbers queue
- 19:30 Changeset [12116] by
- Fixed something about the enable of the FTM start and stop button.
- 19:19 Changeset [12115] by
- Some more updates to the Slow control values and some fixes to the MCP status.
- 14:30 Changeset [12114] by
- Relaxed a bit the requirements for a vlid file.
- 13:29 Changeset [12113] by
- Exchanged voltages and currents for Crate 1 and 2
- 12:55 Changeset [12112] by
- removed one more Font set
- 12:03 Changeset [12111] by
- Fixed missing template argument.
09/15/11:
- 23:12 Changeset [12110] by
- Replaced red LED in FAD tab by GreenBar
- 23:10 Changeset [12109] by
- 22:53 Changeset [12108] by
- Added states for the status of the voltage.
- 22:53 Changeset [12107] by
- 22:52 Changeset [12106] by
- Enable/disable some control buttons depending on the state; added MCP state
- 13:31 Changeset [12105] by
- fixed viewer
- 13:26 Changeset [12104] by
- fixed viewer
- 12:44 Changeset [12103] by
- added auto highlight of pixels
09/14/11:
- 20:41 Changeset [12102] by
- Added some output to better understand the configure procedure.
- 13:13 Changeset [12101] by
- enabled the Logging state
- 11:05 Changeset [12100] by
- Show info in the status line when 'mouseOver'
- 10:19 Changeset [12099] by
- Removed a compiler warning
- 09:02 Changeset [12098] by
- removed -1 run report
09/13/11:
- 21:03 Changeset [12097] by
- improved layout
- 21:03 Changeset [12096] by
- switched on ldap authentication
- 21:01 Changeset [12095] by
- updated ldap info
- 19:05 Changeset [12094] by
- Fixed the feedback units.
- 15:22 Changeset [12093] by
- set nan values color to purple
- 15:07 Changeset [12092] by
- got rid of crappy nan display
- 14:45 Changeset [12091] by
- Updated to the latest event builder version which includes runEnd and runStart to control the memory of the processing threads.
- 14:43 Changeset [12090] by
- Increased sync-delay from 333ms to 500ms; added commands and states to help output.
- 14:43 Changeset [12089] by
- Updated scaling of some voltages; added commands and states to help output
- 14:42 Changeset [12088] by
- Added commands and states to help output.
- 14:40 Changeset [12087] by
- Added the PrintHelp function which is supposed to print state and command informations of a state machine.
- 14:40 Changeset [12086] by
- Added a default for dns in Setup()
- 14:39 Changeset [12085] by
- Changed the exclude patterns
- 14:39 Changeset [12084] by
- Added a link to topcat.
- 14:11 Changeset [12083] by
- fixed datalogger
- 13:02 Changeset [12082] by
- Set DIM_DNS_NODE to a fake address if no dns is given to be able to 'switch off' Dim support through a backdoor.
- 13:02 Changeset [12081] by
- Propagate pixel and patch maps to the camera displays.
- 10:36 Changeset [12080] by
- removed cout
- 09:26 Changeset [12079] by
- trying to enable depth test
09/12/11:
- 20:05 Changeset [12078] by
- Fixed order of initialization of root canvses
- 20:04 Changeset [12077] by
- Changed some widgets to 'Preferred'
- 19:39 Changeset [12076] by
- Added feedback Led and label
- 19:08 Changeset [12075] by
- Call setAutoscaleLowerLimit for all cameras
- 19:04 Changeset [12074] by
- removed anti-aliasing
- 18:04 Changeset [12073] by
- did nothing
- 16:44 Changeset [12072] by
- forgot a line in the upate
- 14:05 Changeset [12071] by
- various small fixes and improvements
09/11/11:
- 21:38 Changeset [12070] by
- Simplified SendFeedbackData
- 21:37 Changeset [12069] by
- Another improvement to the GetPixelMax loop; added more sanity checks
- 21:35 Changeset [12068] by
- Multiply the ETH voltages not the FTM voltages; added some reference voltages to the comments.
- 21:34 Changeset [12067] by
- Added or updated some text; set default control loop parameters in EvalOptions; added a gain (conversion constant)
- 21:33 Changeset [12066] by
- Make the newly read drs calibration only valid at the end of the function.
- 21:32 Changeset [12065] by
- Updated feedback display; added the missing updateCamera when a new event was received.
- 21:31 Changeset [12064] by
- Added option for pixel map file.
- 21:31 Changeset [12063] by
- Adapted naming of feedback widgets.
- 21:30 Changeset [12062] by
- Added two root canvases to the feedback tab.
- 12:03 Changeset [12061] by
- Added command descriptions.
09/09/11:
- 10:36 Changeset [12060] by
- Fixed includes.
- 10:28 Changeset [12059] by
- Removed the path from the qwt include - an error introduced by Thomas K. recently.
- 10:23 Changeset [12058] by
- Reverted an error which was recently introduced by Thomas k.
- 10:19 Changeset [12057] by
- Simplified SendFeedbackData for the momen
- 10:12 Changeset [12056] by
- Added an error output in case the fits file could not be opened.
- 10:12 Changeset [12055] by
- Added some const-qualifiers; fixed some compiler warings; removed a global namespace defintion from the header file; fixed the errornous includes (no path in Qt and Qwt includes -- the path is defined by the configure script); fixed a type from yesterday (mean not sum)
- 10:10 Changeset [12054] by
- Removed a global namespace definition from the header file.
- 10:09 Changeset [12053] by
- Removed the errornous subdirectory form the include of the Qwt classes; moved include of fits to the source file; removed a global namespace definition from the header
09/08/11:
- 22:36 Changeset [12052] by
- Fixed calculation of rms (variance)
- 22:36 Changeset [12051] by
- Exchanged median/mean and min/max
- 22:25 Changeset [12050] by
- Replaced build in FACTmapV5(a) by a program otpion.
- 22:09 Changeset [12049] by
- Fixed wrong read access in GetPixelMax
- 21:57 Changeset [12048] by
- Fixed a compiler warning.
- 21:57 Changeset [12047] by
- Changed name of mapping file; added possibility to set control loop parameters; added sending result; preliminarily fixed the control loop paremetrs to something which is working.
- 21:54 Changeset [12046] by
- Renamed file for pisel map; set title and units for the feedback cams.
- 21:52 Changeset [12045] by
- Fixed memory (write) access in GetPixelMax
- 21:50 Changeset [12044] by
- Fixed call to IsValid
- 21:50 Changeset [12043] by
- Added HasTriggerPed
- 21:49 Changeset [12042] by
- Added program name to call of parse_database; fixed database query; removed setting 'unregistered' option - this is done in a later step by boost itself
- 21:48 Changeset [12041] by
- Added program name to call of parse_database
- 21:48 Changeset [12040] by
- Added the correct path to DimWriteStatistics; fixed the extraction region in the call of CalibData::GetPixelMax; do not limit sending rate of DRS calib result for feedback; set g_maxProc to 3
- 21:45 Changeset [12039] by
- Added Pedestal trigger to output.
- 21:44 Changeset [12038] by
- Fixed the check for the sampling-frequency check.
- 21:43 Changeset [12037] by
- Added g_maxProc
- 21:41 Changeset [12036] by
- Add one to the STEP read from the FITS file.
- 16:24 Changeset [12035] by
- added moving of corrupted files to corrupted naming
- 15:11 Changeset [12034] by
- merged waiting run and logging states
- 14:38 Changeset [12033] by
- added the run number name check
- 12:55 Changeset [12032] by
- FTU: just some changes in the testbench
- 12:55 Changeset [12031] by
- improved layout
- 12:55 Changeset [12030] by
- improved layout
- 12:53 Changeset [12029] by
- FTM: firmware version 6 committed with new IP address and LEDs off
- 10:01 Changeset [12028] by
- 10:01 Changeset [12027] by
- Fixed GetTriggerLogic
- 10:00 Changeset [12026] by
- Fixed the hw() code.
- 10:00 Changeset [12025] by
- Some code cosmetics.
- 10:00 Changeset [12024] by
- Replaced updateGL by updateCamera; for the moment display deviation and correction values in bias tab.
- 09:59 Changeset [12023] by
- Added setting of min/max for feedback cameras.
- 09:59 Changeset [12022] by
- Updated Feedback tab.
09/07/11:
- 20:36 Changeset [12021] by
- small layout issues
- 20:20 Changeset [12020] by
- fixed parameters prog and key1.key2 for reloading of table
- 20:04 Changeset [12019] by
- right-align for Min, Max and Value
- 19:41 Changeset [12018] by
- Latest update.
- 19:22 Changeset [12017] by
- Updated to have HAVE_ZLIB defined.
- 19:06 Changeset [12016] by
- added the temperature viewer
- 17:46 Changeset [12015] by
- adapted viewer after config-read changed
- 17:34 Changeset [12014] by
- really fixed the qwt issue
- 17:30 Changeset [12013] by
- fixed a qwt configure bug
- 16:58 Changeset [12012] by
- Now take the config files from methods instead of files
- 15:48 Changeset [12011] by
- added Show/Hide for edit-mode
- 15:47 Changeset [12010] by
- changed text
- 15:47 Changeset [12009] by
- added Show/Hide for user,indices and validfrom also for edit-mode
- 15:23 Changeset [12008] by
- improve help of fitsdump
- 14:48 Changeset [12007] by
- Updated decoding of trigger type pattern.
- 14:11 Changeset [12006] by
- Removed a spray debug line.
- 13:29 Changeset [12005] by
- Changed order of temperatures (Quirin/Etienne) to make it fit with the checks from Dominik.
- 13:27 Changeset [12004] by
- Changed named of temp widgets for better understanding.
- 12:58 Changeset [12003] by
- removed debug pixel/patch highlight
- 10:58 Changeset [12002] by
- Improved service output for empty services (size==0)
- 10:20 Changeset [12001] by
- Removed ios::in from file opening. This gave problems if the existing file doesn't exist yet.
- 09:59 Changeset [12000] by
- Renamed TakingData state (description) to TriggerOn to avoid confusion (sounds like data is written)
- 09:58 Changeset [11999] by
- Fixed path name which has to be 'offsetted' by 12 hours.
- 09:57 Changeset [11998] by
- Implemented display of feedback values.
- 09:55 Changeset [11997] by
- Added a SetDatat taking a valarray of floats as argument -- could be replaced by a template if more are needed.
- 09:55 Changeset [11996] by
- Added feedback tab.
- 08:20 Changeset [11995] by
- Improved outputin SetupConfiguration
- 08:19 Changeset [11994] by
- Fixed calculation of average front plate temprerature.
- 08:05 Changeset [11993] by
- Added voltage limit relative to G-APD reference voltage.
09/06/11:
- 22:35 Changeset [11992] by
- min, max can be left empty now and changed later small bugfixes
- 22:34 Changeset [11991] by
- added checks for $_GET values =0
- 22:33 Changeset [11990] by
- adapted addRow() function to provide also description
- 22:32 Changeset [11989] by
- added 'Copy Key' button
- 21:36 Changeset [11988] by
- Display average front plate temperature.
- 21:35 Changeset [11987] by
- Some simplifications to make interpretation easier.
- 21:35 Changeset [11986] by
- Added a widget to display the average front plate temperature.
- 17:13 Changeset [11985] by
- various display changes
- 16:41 Changeset [11984] by
- Fixed mapping in cbpx
- 12:54 Changeset [11983] by
- Reverted unintentional last commit.
- 12:49 Changeset [11982] by
- Added possibility to set a single channel to its reference value.
- 12:49 Changeset [11981] by
- Changed bias tab; added possibility to set a single channel to its reference value.
- 09:36 Changeset [11980] by
- Added PrintInfo and a counter for the recived answers; fixed OverCurrentReset (the reset after the first command was missing).
- 09:35 Changeset [11979] by
- Switched off DEBUG_TX
- 09:35 Changeset [11978] by
- Added missing initialization in 'empty'.
- 09:24 Changeset [11977] by
- bugfix: function was missing last argument
- 09:14 Changeset [11976] by
- bugfix for 'Add Prg/Key' button
09/05/11:
- 21:46 Changeset [11975] by
- DoesPathExist now takes a copy rather than a reference.
- 21:46 Changeset [11974] by
- Fixed the case in which DoesPathExist gets no path at all and the case in which create directory gets a relative path.
- 21:43 Changeset [11973] by
- Improved error messages.
- 21:42 Changeset [11972] by
- Read G-APD nominal bias voltage and added getters.
- 21:42 Changeset [11971] by
- Do not re-open automatically if the connection was closed due to error.
- 18:42 Changeset [11970] by
- Added some spacers in the Aux tab to keep the camera display in shape.
- 16:29 Changeset [11969] by
- Added simple function to just return the maxima within a pre-defined range.
- 16:28 Changeset [11968] by
- Moved sending of Event Data to new threads (subProcEvt); added fDimFeedbackData
- 16:27 Changeset [11967] by
- Added BIAS states, added kLedInProgress, moved PixelMap to new file
- 16:26 Changeset [11966] by
- Added a getter returning whether the current DRS calibration is complete.
- 16:25 Changeset [11965] by
- Replaced reading of the FACTmapV5 by the PixelMap class.
- 16:25 Changeset [11964] by
- Added default values to the getter, allow TUNIT to be empty.
- 16:24 Changeset [11963] by
- Fixed two wrong conditional checks if there was an error or not.
- 16:23 Changeset [11962] by
- 16:22 Changeset [11961] by
- Added 'in progress.png'
- 16:19 Changeset [11960] by
09/02/11:
- 16:01 Changeset [11959] by
- Highlight pixels in over-current and when in reference.
- 15:59 Changeset [11958] by
- Make a trick to work around the -0 problem when signalling the over current status.
- 15:57 Changeset [11957] by
- Adapted to little changed in the Bias tab
- 15:57 Changeset [11956] by
- Allow negative offsets; some updated to button texts; both in the bias tap
- 15:37 Changeset [11955] by
- CH -> CBPX
- 15:30 Changeset [11954] by
- Use enums from namespace BIAS; display channel in ADC histogram
- 13:54 Changeset [11953] by
- Added commands to set all 416 channels at once (for the feedback) and unified them with the existing set/add commands.
- 13:10 Changeset [11952] by
- Changed the behaviour of # such that the output is nicely logged to the output file.
- 13:05 Changeset [11951] by
- Little updates to bias tab
- 12:54 Changeset [11950] by
- Updated the way the currents and voltages are printed.
- 12:50 Changeset [11949] by
- Added some controls in the bias tab to increase/decrease the voltage globally
- 12:49 Changeset [11948] by
- Added new command to globally increase/decrease the reference voltage; Werner updated some help texts
- 10:09 Changeset [11947] by
- Added two missing endl.
- 09:38 Changeset [11946] by
- Added the possibility to set the dafault in po_bool
- 09:37 Changeset [11945] by
- Added append-log option.
- 09:37 Changeset [11944] by
- forgot properly save the file before commit
- 09:37 Changeset [11943] by
- Added explanatory strings for command line options and events.
- 09:36 Changeset [11942] by
- Added append option to OpenLogFile
- 09:34 Changeset [11941] by
- added autoRefresh flag to GL widgets
- 08:23 Changeset [11940] by
- Implemented three different receive buffers and blocked sending of several commands before an answer is received to avoid that a buffer is written to before the previous handler has finished.
- 08:05 Changeset [11939] by
- Definition for the biasctrl
09/01/11:
- 21:39 Changeset [11938] by
- Added some more configuration options and a voltage limit
- 17:47 Changeset [11937] by
- Added some more print commands and more states.
- 17:46 Changeset [11936] by
- Disable Bias tab by default; added some enumd for different LED images; changed bias control LED accordingly
- 17:45 Changeset [11935] by
- Enabled button commands for bias control.
- 17:44 Changeset [11934] by
- Adapted maxima in Bias tab
- 16:16 Changeset [11933] by
- various bug fix + events anim impl
- 15:30 Changeset [11932] by
- Fixed a couple of bugs in the BIAS voltage; for the time being disabled highlighting of pixels -- too slow.
- 15:24 Changeset [11931] by
- Fixed a couple of minor bugs only visible during the first real test; made things work; do not request current during ramping (the ramping procedure does this anyway.
08/31/11:
- 16:56 Changeset [11930] by
- Added a comment.
- 16:56 Changeset [11929] by
- Use the new enum for the first free user state to define the states.
- 16:55 Changeset [11928] by
- Added a enum defining the first available user state.
- 16:54 Changeset [11927] by
- Added the latest changes so that the whole control should become more robust and should disconnect whenever something goes wrong; added ramping and other features.
- 16:53 Changeset [11926] by
- Adapted Bias control stuff to the changes in the GUI; mainly added the didplay of voltages.
- 16:53 Changeset [11925] by
- Updated Bias control stuff, especially removed the sending of commands for the moment.
- 16:52 Changeset [11924] by
- Updated Bias tab mainly with a second display for the voltages.
- 16:46 Changeset [11923] by
- Possibility to switch highlighting off was missing.
- 15:42 Changeset [11922] by
- various Daniela suggestions and improvements
- 15:13 Changeset [11921] by
- Added a second argument to AsyncRead to be able to propagate a counter; for the moment switched DEBUG_TX on; only try to close the connection if it is not open
- 14:42 Changeset [11920] by
- forgot the .h
08/30/11:
- 15:16 Changeset [11919] by
- Added simple bias current calibration
- 15:00 Changeset [11918] by
- removed wavelet display (was private debug only)
- 13:52 Changeset [11917] by
- Added pixels 1438 and 1439
- 10:36 Changeset [11916] by
- Removed some obsolete include.
Note:
See TracTimeline
for information about the timeline view.
