Timeline
10/26/11:
- 23:23 Changeset [12288] by
- Addec ontrols for N/4
- 23:20 Changeset [12287] by
- Adapted format string for TRIGGER_RATES
- 23:19 Changeset [12286] by
- Fixed a misspelled class name.
- 23:19 Changeset [12285] by
- Removed stray debug output.
- 23:03 Changeset [12284] by
- Added elapsed time and on time to DrimTriggerRate
- 23:01 Changeset [12283] by
- Display N/4 logic threshold
- 23:00 Changeset [12282] by
- Added some N/4 controls
- 19:44 Changeset [12281] by
- Added the most simple spike removal to the display -- sould be possible to switch it off.
- 19:43 Changeset [12280] by
- Added the most simple spike removal before the statistics for the eventdisplay (maxima, etc) are calculated.
- 19:42 Changeset [12279] by
- Added some more output in case the previous answer was not yet recived; reset the ramping state when a new connection was established; do not reset voltages if we were previously connected.
- 19:41 Changeset [12278] by
- Added a very simple spike removal algorithm.
- 11:41 Changeset [12277] by
- fixed the handling of columns names in the datalogger
- 11:00 Changeset [12276] by
- Moved declaration of parread_tmp to the other declarations of read parameters of the fit.
- 10:53 Changeset [12275] by
- Added more comments. Questions please to tpk@phys.ethz.ch.
10/25/11:
- 21:33 Changeset [12274] by
- Allow that UnixTimeUTC is missing.
- 21:32 Changeset [12273] by
- Implemented feedback controls
- 20:06 Changeset [12272] by
- Exchanged some values whcih were obviously exhanged
- 19:59 Changeset [12271] by
- Added the possibility to apply a global offset to the temperature controlled feedback values
- 19:51 Changeset [12270] by
- Added the possibility to switch off the update interval.
- 19:50 Changeset [12269] by
- Fixed wiritng the fits header.
- 19:49 Changeset [12268] by
- Fixed the output in the txt-file.
- 19:49 Changeset [12267] by
- Replaced the int16_t for dac by a uint16_t
- 19:48 Changeset [12266] by
- Disabled some broken sensor widgets by default
- 14:03 Changeset [12265] by
- removed needless include statement
- 14:02 Changeset [12264] by
- whitespaces
- 14:02 Changeset [12263] by
- a better example than fpeak_discri.C ... at least I hope so
- 13:55 Changeset [12262] by
- makes use of the new discriminators
- 13:53 Changeset [12261] by
- whitespaces only
- 13:52 Changeset [12260] by
- I case you want to see real raw data
- 13:52 Changeset [12259] by
- discriminator does now return vector<Region>
- 13:51 Changeset [12258] by
- zerosearch does now return vector<Region>
- 13:50 Changeset [12257] by
- vector<Region> are returned by most of my discriminators
- 13:50 Changeset [12256] by
- added zipped fits file support
- 13:49 Changeset [12255] by
- i know its wrong ... but i can't work without these files...
10/23/11:
- 21:40 Changeset [12254] by
- Added the possibility to change the update interval online.
- 19:43 Changeset [12253] by
- Added tab for drive controls.
- 19:43 Changeset [12252] by
- Added commands to set LED brightness.
- 17:06 Changeset [12251] by
- Added descriptions for the dim services.
- 17:05 Changeset [12250] by
- Added some dim descriptions.
- 17:05 Changeset [12249] by
- Added some Dim descriptions and a new service propagating the nominal voltages.
- 15:54 Changeset [12248] by
- Added some state descriptions.
- 15:09 Changeset [12247] by
- Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by START_RUN_LOGGING and fixed a typo in a message
- 15:08 Changeset [12246] by
- Reverting to last revision.
- 15:08 Changeset [12245] by
- Reverting to last revision.
- 15:07 Changeset [12244] by
- Reverting to last revision.
- 15:06 Changeset [12243] by
- Added output of commands and states to --help
- 15:01 Changeset [12242] by
- Fixed a typo.
- 15:00 Changeset [12241] by
- Added possibility to scan in the N-out-of-4 logic.
- 14:53 Changeset [12240] by
- Some imporved output.
- 14:47 Changeset [12239] by
- Added configuration options and more help output.
- 14:37 Changeset [12238] by
- Give scan range with the START command.
- 14:33 Changeset [12237] by
- Allow to set one patch or pixel as reference for the rate-scan.
- 13:33 Changeset [12236] by
- Changed signed char to unsigned in output queue.
- 12:45 Changeset [12235] by
- Some lttle cosmetics; added some help stuff.
- 12:43 Changeset [12234] by
- Allow STOP in all states.
- 12:43 Changeset [12233] by
- Switch off debugging by default.
- 12:40 Changeset [12232] by
- Added some more DEBUG stuff.
- 12:39 Changeset [12231] by
- Fixed the new DEBUG stuff.
10/22/11:
- 19:26 Changeset [12230] by
- Added some debug options.
- 19:25 Changeset [12229] by
- Added some debug out code.
- 19:25 Changeset [12228] by
- Fixed start/stop buttons for datalogger.
10/21/11:
- 18:09 Changeset [12227] by
- Latest updates and bug fixes.
- 17:58 Changeset [12226] by
- Latest updates and bug fixes.
- 13:53 Changeset [12225] by
- more comments edited
- 13:47 Changeset [12224] by
- Comments edited
10/20/11:
- 22:40 Changeset [12223] by
- Fixed a scoping problem.
- 22:32 Changeset [12222] by
- Fixed status VoltageOff.
- 17:52 Changeset [12221] by
- Debuged temperature feedback.
- 17:17 Changeset [12220] by
- now with ramping
- 13:40 Changeset [12219] by
- Send only calibration events to feedback system.
- 13:34 Changeset [12218] by
- Adapted the datalogger state checks
- 11:43 Changeset [12217] by
- Evaluate the new status which shows if an FAD is configured.
- 11:42 Changeset [12216] by
- Send a different status for FADs which are currently configured.
- 11:34 Changeset [12215] by
- Allow derived classes to access CloseImp from handlers.
- 11:33 Changeset [12214] by
- Improved error messages; replaces PostClose by CloseImp in handlers.
- 11:33 Changeset [12213] by
- Improved error messages; switched to hardware flow control -- does this make any sense?
- 11:32 Changeset [12212] by
- Fixed a problem with the pixels 0-159 in the Rates tab.
- 01:15 Changeset [12211] by
- Added some more debug output.
- 01:14 Changeset [12210] by
- Debuged to make it work.
- 01:13 Changeset [12209] by
- Unifiy instantiation and assignemnt of initial numbers.
- 01:13 Changeset [12208] by
- Send SET_GAPD_REFERENCE_OFFSET as float:
10/18/11:
- 15:19 Changeset [12207] by
- 15:18 Changeset [12206] by
- 14:01 Changeset [12205] by
- removed CRLF
- 14:00 Changeset [12204] by
- removed CRLF
- 14:00 Changeset [12203] by
- Removed some obsolete output in PrintUsage
- 13:59 Changeset [12202] by
- Added ratescan.
- 13:58 Changeset [12201] by
- First version of a tool performing a rate scan.
- 12:47 Changeset [12200] by
- added dummy version of this file with link where to find the file
- 12:47 Changeset [12199] by
- added dummy version of this file with link where to find file
- 12:35 Changeset [12198] by
- removed (to avoid having the file twice in the svn)
- 12:35 Changeset [12197] by
- removed (to have file not double in svn)
- 11:13 Changeset [12196] by
- typo
- 11:10 Changeset [12195] by
- erm .. not yet working.. but I want to submit it anyway
- 11:10 Changeset [12194] by
- copy of FACT++/externals ... shouldn't be here .. but i don't know a better way
- 11:09 Changeset [12193] by
- formerly fana.C test for zipped fits files
10/17/11:
- 20:18 Changeset [12192] by
- Removed obsolete files.
- 20:11 Changeset [12191] by
- Added PixelMap to feedback.
- 19:59 Changeset [12190] by
- Updated efeaults.
- 19:59 Changeset [12189] by
- Fixed startup.
- 19:47 Changeset [12188] by
- Fixed several mappings.
- 16:37 Changeset [12187] by
- Replaced dic_cmnd_service by DimClient::sendCommandNB.
- 16:37 Changeset [12186] by
- Added the missing channel spin-box.
- 16:36 Changeset [12185] by
- Removed a lot of obsolete code; many simplifications; started to clean up all the mess.
- 13:23 Changeset [12184] by
- Removed a lot of obsolete code, added some code to unify the GUI class with the strange connector class.
- 12:33 Changeset [12183] by
- Implemented the possibility to adapt the voltage according to the temperature readout from the sensor plate.
- 09:34 Changeset [12182] by
- Implemented new Feedback states.
10/13/11:
- 14:27 Changeset [12181] by
- update hostname of mysql server
- 10:21 Changeset [12180] by
- Removed the obsolete use of the Trigger-Patches.txt, the fPatchHW and the patches-array in the gui classes
- 09:22 Changeset [12179] by
- Added treatment of new buttons fThresholdEnable/DisablePatch
- 09:16 Changeset [12178] by
- Added buttons to enable disable all pixels of a singel patch.
- 09:09 Changeset [12177] by
- Added new commands ENABLE_PATCH and DISABLE_PATCH
10/12/11:
- 21:41 Changeset [12176] by
- Switched off overwriting of scale when auto scale is switched off.
- 21:20 Changeset [12175] by
- Updated usage information and Configuration class usage.
- 12:05 Changeset [12174] by
- Added the needed stuff for the DRS Calibration.
- 12:04 Changeset [12173] by
- Fixed a weird asymmetric color scale; fixed the wrong DRS calibration by using the proper class; hacked the rest to get this working.
10/11/11:
- 23:14 Changeset [12172] by
- 19:29 Changeset [12171] by
- Changed wrong character
- 19:26 Changeset [12170] by
- small fix: Thomas and Werner
- 19:26 Changeset [12169] by
- initial commit of discriminator.C
- 14:59 Changeset [12168] by
- merge versions from Werner and Dominik
- 13:47 Changeset [12167] by
- Updated graph; unified paths; updated compilation of file-names; removed obsolete commands
- 13:32 Changeset [12166] by
- initial commit
10/02/11:
- 13:36 Changeset [12165] by
- 13:36 Changeset [12164] by
- Added bool-cast operator to PixelMapEntry.
- 13:35 Changeset [12163] by
- Choose better name for PCTime column
- 13:34 Changeset [12162] by
- Adapted to latest change in Makefile.am
- 13:33 Changeset [12161] by
- Undo last revision.
- 13:28 Changeset [12160] by
- Added PixelMap.cc to fact_SOURCES
10/01/11:
- 20:11 Changeset [12159] by
- Removed definition of PixelMapEntry::empty -- it simple does not belong here -- please fix it correctly
09/29/11:
- 10:41 Changeset [12158] by
- oops, forgot .h
- 10:40 Changeset [12157] by
- changed PC time to human-readable
09/28/11:
- 16:54 Changeset [12156] by
- improved update of curves
- 16:27 Changeset [12155] by
- changed calibrated view
- 16:26 Changeset [12154] by
- changed calibrated view
- 16:20 Changeset [12153] by
- removed the text display
- 16:14 Changeset [12152] by
- changed from v5 to 5a
- 16:12 Changeset [12151] by
- removed pixelMap static def
- 14:44 Changeset [12150] by
- bug fix - fitsdump
- 14:41 Changeset [12149] by
- bug fix - fitsdump
09/26/11:
- 14:55 Changeset [12148] by
- Added writing of more information into header.
Note:
See TracTimeline
for information about the timeline view.
