Timeline
10/31/11:
- 21:25 Changeset [12353] by
- Removed an obsolete comment block
- 20:00 Changeset [12352] by
- Adapted output of filenames.
- 19:02 Changeset [12351] by
- Set some fixed control loop parameters as determined in Zurich; output also the state of the FSC
- 18:56 Changeset [12350] by
- Do directly set the new reference in SetReference.
- 18:55 Changeset [12349] by
- Removed the warning in case of double delete... so far no problems weere encountered.
- 18:53 Changeset [12348] by
- Use the connection to the DNS as the IP address to get the Local IP.
- 18:53 Changeset [12347] by
- Make the FEEDBACK receive the data all the time for a combined control of temp and amplitude
- 18:52 Changeset [12346] by
- Do not use statvfs in SetCurrentFolder.
- 18:51 Changeset [12345] by
- Display N/40 in decimal
- 17:41 Changeset [12344] by
- Removed obsolete DataCalib.h and DataCalib.cc from viewer.
- 14:52 Changeset [12343] by
- Moved some common code between MARS and FACT++ to DrsCalib.h as new class DrsCalibration; renamed CalibData to DrsCalibrate.
- 02:07 Changeset [12342] by
- Improved output; removed obsolste ?: operators.
- 00:11 Changeset [12341] by
- Fixed tha calculation of the average ethernet rate; removed min and max and removed the obsolete widgets from the Event builder tab.
- 00:10 Changeset [12340] by
- Unified FAD and EvtBuilder tab as much as possible.
- 00:01 Changeset [12339] by
- Renamed default pixel map file.
10/30/11:
- 23:56 Changeset [12338] by
- Renamed option ramp-time to ramp-delay
- 23:29 Changeset [12337] by
- Removed stray debug output.
- 22:38 Changeset [12336] by
- For the time being go back to idle when a new run was successfully started.
- 22:36 Changeset [12335] by
- Improved class reference.
- 22:36 Changeset [12334] by
- Renamed kTakingData to kTriggerOn
- 22:35 Changeset [12333] by
- Added GetNumFilesOpen and IncreaseRunNumber.
- 22:34 Changeset [12332] by
- Replaced kTakingData by kTriggerOn
- 22:34 Changeset [12331] by
- Added the state kWritingData and avoid that run-numbers can be decreased manually.
- 22:33 Changeset [12330] by
- Added state kWritingData.
- 22:32 Changeset [12329] by
- Changed the 'define all' and 'define err' in a way that it is less disturbing
- 22:31 Changeset [12328] by
- Renamed FTM::kTakingData to FTM::kTriggerOn
- 03:43 Changeset [12327] by
- replaces PCTime by UnixTimeUTC
- 03:41 Changeset [12326] by
- Removed comments; replaced code in Apply by ApplyCh; fixed the problem that the DRS calibration data was assumed to be of size roi/ch instead of 1024/ch
10/29/11:
- 22:31 Changeset [12325] by
- Show VoltageOff as a red bar in the status LED
- 21:48 Changeset [12324] by
- Fixed some litle stuff in the new ratescan tab.
- 21:37 Changeset [12323] by
- Added the possibility to change the step size and maximum during a ratescan.
- 20:57 Changeset [12322] by
- Allow eversything in fact++.rc
10/28/11:
- 22:23 Changeset [12321] by
- adapted paths for raw and aux data
- 21:49 Changeset [12320] by
- Do not set negative axis ranges in handleRateScan.
- 21:45 Changeset [12319] by
- Switch control off when voltage off.
- 20:28 Changeset [12318] by
- updated ldaphost
- 20:24 Changeset [12317] by
- bugfix for updating string
- 19:58 Changeset [12316] by
- Removed invalid characters from Dim descriptions
- 19:58 Changeset [12315] by
- Make sure that the default option gets touched even it is finally not needed.
- 19:57 Changeset [12314] by
- Stop startinga run if datalogger went into error state.
- 19:56 Changeset [12313] by
- Added an option to disable whole patches. fixed scaling factor in instaniation of Drim TriggerRates.
- 19:55 Changeset [12312] by
- Fixed a workaround.
- 19:54 Changeset [12311] by
- Fixed writing of the data.
- 11:37 Changeset [12310] by
- fixed a blur display bug
- 05:36 Changeset [12309] by
- First woring and tested version.
- 05:35 Changeset [12308] by
- Added specilized template to make sure we do not have to convert floats to ints
10/27/11:
- 22:14 Changeset [12307] by
- added '#define HAVE_ZLIB'
- 22:04 Changeset [12306] by
- added removeMaximaAbove method
- 21:36 Changeset [12305] by
- adjusted use of zerosearch() method ... this method doesn't return ints anymore, but struct Region see Region.h
- 21:35 Changeset [12304] by
- added symmetric sliding average filter
- 17:10 Changeset [12303] by
- Save spectra of gainanalysis to the file gainspectra.root.
- 16:45 Changeset [12302] by
- added clean destruction of qwt objects
- 16:35 Changeset [12301] by
- moved double click to single click
- 16:30 Changeset [12300] by
- added RMS tab and fixed time for old format
- 16:07 Changeset [12299] by
- Include #define HAVE_ZLIB for compressed data files.
- 16:00 Changeset [12298] by
- added fbsl.C ...extract baseline data
- 14:42 Changeset [12297] by
- added RMS tab
- 13:20 Changeset [12296] by
- added cron to rsync auxiliary and rawdata
- 04:59 Changeset [12295] by
- Addec code for the rate scan tab display
- 04:59 Changeset [12294] by
- Added sending of Dim services.
- 04:58 Changeset [12293] by
- Added controls for rate scan tab.
- 04:58 Changeset [12292] by
- Added tab for RateScans
- 01:21 Changeset [12291] by
- Use new features of trigger rate service.
- 00:20 Changeset [12290] by
- Included EnablePatch and a default constructor for the trigger rates.
- 00:11 Changeset [12289] by
- Store trigger rates for later display
10/26/11:
- 23:23 Changeset [12288] by
- Addec ontrols for N/4
- 23:20 Changeset [12287] by
- Adapted format string for TRIGGER_RATES
- 23:19 Changeset [12286] by
- Fixed a misspelled class name.
- 23:19 Changeset [12285] by
- Removed stray debug output.
- 23:03 Changeset [12284] by
- Added elapsed time and on time to DrimTriggerRate
- 23:01 Changeset [12283] by
- Display N/4 logic threshold
- 23:00 Changeset [12282] by
- Added some N/4 controls
- 19:44 Changeset [12281] by
- Added the most simple spike removal to the display -- sould be possible to switch it off.
- 19:43 Changeset [12280] by
- Added the most simple spike removal before the statistics for the eventdisplay (maxima, etc) are calculated.
- 19:42 Changeset [12279] by
- Added some more output in case the previous answer was not yet recived; reset the ramping state when a new connection was established; do not reset voltages if we were previously connected.
- 19:41 Changeset [12278] by
- Added a very simple spike removal algorithm.
- 11:41 Changeset [12277] by
- fixed the handling of columns names in the datalogger
- 11:00 Changeset [12276] by
- Moved declaration of parread_tmp to the other declarations of read parameters of the fit.
- 10:53 Changeset [12275] by
- Added more comments. Questions please to tpk@phys.ethz.ch.
10/25/11:
- 21:33 Changeset [12274] by
- Allow that UnixTimeUTC is missing.
- 21:32 Changeset [12273] by
- Implemented feedback controls
- 20:06 Changeset [12272] by
- Exchanged some values whcih were obviously exhanged
- 19:59 Changeset [12271] by
- Added the possibility to apply a global offset to the temperature controlled feedback values
- 19:51 Changeset [12270] by
- Added the possibility to switch off the update interval.
- 19:50 Changeset [12269] by
- Fixed wiritng the fits header.
- 19:49 Changeset [12268] by
- Fixed the output in the txt-file.
- 19:49 Changeset [12267] by
- Replaced the int16_t for dac by a uint16_t
- 19:48 Changeset [12266] by
- Disabled some broken sensor widgets by default
- 14:03 Changeset [12265] by
- removed needless include statement
- 14:02 Changeset [12264] by
- whitespaces
- 14:02 Changeset [12263] by
- a better example than fpeak_discri.C ... at least I hope so
- 13:55 Changeset [12262] by
- makes use of the new discriminators
- 13:53 Changeset [12261] by
- whitespaces only
- 13:52 Changeset [12260] by
- I case you want to see real raw data
- 13:52 Changeset [12259] by
- discriminator does now return vector<Region>
- 13:51 Changeset [12258] by
- zerosearch does now return vector<Region>
- 13:50 Changeset [12257] by
- vector<Region> are returned by most of my discriminators
- 13:50 Changeset [12256] by
- added zipped fits file support
- 13:49 Changeset [12255] by
- i know its wrong ... but i can't work without these files...
10/23/11:
- 21:40 Changeset [12254] by
- Added the possibility to change the update interval online.
- 19:43 Changeset [12253] by
- Added tab for drive controls.
- 19:43 Changeset [12252] by
- Added commands to set LED brightness.
- 17:06 Changeset [12251] by
- Added descriptions for the dim services.
- 17:05 Changeset [12250] by
- Added some dim descriptions.
- 17:05 Changeset [12249] by
- Added some Dim descriptions and a new service propagating the nominal voltages.
- 15:54 Changeset [12248] by
- Added some state descriptions.
- 15:09 Changeset [12247] by
- Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by START_RUN_LOGGING and fixed a typo in a message
- 15:08 Changeset [12246] by
- Reverting to last revision.
- 15:08 Changeset [12245] by
- Reverting to last revision.
- 15:07 Changeset [12244] by
- Reverting to last revision.
- 15:06 Changeset [12243] by
- Added output of commands and states to --help
- 15:01 Changeset [12242] by
- Fixed a typo.
- 15:00 Changeset [12241] by
- Added possibility to scan in the N-out-of-4 logic.
- 14:53 Changeset [12240] by
- Some imporved output.
- 14:47 Changeset [12239] by
- Added configuration options and more help output.
- 14:37 Changeset [12238] by
- Give scan range with the START command.
- 14:33 Changeset [12237] by
- Allow to set one patch or pixel as reference for the rate-scan.
- 13:33 Changeset [12236] by
- Changed signed char to unsigned in output queue.
- 12:45 Changeset [12235] by
- Some lttle cosmetics; added some help stuff.
- 12:43 Changeset [12234] by
- Allow STOP in all states.
- 12:43 Changeset [12233] by
- Switch off debugging by default.
- 12:40 Changeset [12232] by
- Added some more DEBUG stuff.
- 12:39 Changeset [12231] by
- Fixed the new DEBUG stuff.
10/22/11:
- 19:26 Changeset [12230] by
- Added some debug options.
- 19:25 Changeset [12229] by
- Added some debug out code.
- 19:25 Changeset [12228] by
- Fixed start/stop buttons for datalogger.
10/21/11:
- 18:09 Changeset [12227] by
- Latest updates and bug fixes.
- 17:58 Changeset [12226] by
- Latest updates and bug fixes.
- 13:53 Changeset [12225] by
- more comments edited
- 13:47 Changeset [12224] by
- Comments edited
10/20/11:
- 22:40 Changeset [12223] by
- Fixed a scoping problem.
- 22:32 Changeset [12222] by
- Fixed status VoltageOff.
- 17:52 Changeset [12221] by
- Debuged temperature feedback.
- 17:17 Changeset [12220] by
- now with ramping
- 13:40 Changeset [12219] by
- Send only calibration events to feedback system.
- 13:34 Changeset [12218] by
- Adapted the datalogger state checks
- 11:43 Changeset [12217] by
- Evaluate the new status which shows if an FAD is configured.
- 11:42 Changeset [12216] by
- Send a different status for FADs which are currently configured.
- 11:34 Changeset [12215] by
- Allow derived classes to access CloseImp from handlers.
- 11:33 Changeset [12214] by
- Improved error messages; replaces PostClose by CloseImp in handlers.
- 11:33 Changeset [12213] by
- Improved error messages; switched to hardware flow control -- does this make any sense?
- 11:32 Changeset [12212] by
- Fixed a problem with the pixels 0-159 in the Rates tab.
- 01:15 Changeset [12211] by
- Added some more debug output.
- 01:14 Changeset [12210] by
- Debuged to make it work.
- 01:13 Changeset [12209] by
- Unifiy instantiation and assignemnt of initial numbers.
- 01:13 Changeset [12208] by
- Send SET_GAPD_REFERENCE_OFFSET as float:
10/18/11:
- 15:19 Changeset [12207] by
- 15:18 Changeset [12206] by
- 14:01 Changeset [12205] by
- removed CRLF
- 14:00 Changeset [12204] by
- removed CRLF
- 14:00 Changeset [12203] by
- Removed some obsolete output in PrintUsage
- 13:59 Changeset [12202] by
- Added ratescan.
- 13:58 Changeset [12201] by
- First version of a tool performing a rate scan.
- 12:47 Changeset [12200] by
- added dummy version of this file with link where to find the file
- 12:47 Changeset [12199] by
- added dummy version of this file with link where to find file
- 12:35 Changeset [12198] by
- removed (to avoid having the file twice in the svn)
- 12:35 Changeset [12197] by
- removed (to have file not double in svn)
- 11:13 Changeset [12196] by
- typo
- 11:10 Changeset [12195] by
- erm .. not yet working.. but I want to submit it anyway
- 11:10 Changeset [12194] by
- copy of FACT++/externals ... shouldn't be here .. but i don't know a better way
- 11:09 Changeset [12193] by
- formerly fana.C test for zipped fits files
10/17/11:
- 20:18 Changeset [12192] by
- Removed obsolete files.
- 20:11 Changeset [12191] by
- Added PixelMap to feedback.
- 19:59 Changeset [12190] by
- Updated efeaults.
- 19:59 Changeset [12189] by
- Fixed startup.
- 19:47 Changeset [12188] by
- Fixed several mappings.
- 16:37 Changeset [12187] by
- Replaced dic_cmnd_service by DimClient::sendCommandNB.
- 16:37 Changeset [12186] by
- Added the missing channel spin-box.
- 16:36 Changeset [12185] by
- Removed a lot of obsolete code; many simplifications; started to clean up all the mess.
- 13:23 Changeset [12184] by
- Removed a lot of obsolete code, added some code to unify the GUI class with the strange connector class.
- 12:33 Changeset [12183] by
- Implemented the possibility to adapt the voltage according to the temperature readout from the sensor plate.
- 09:34 Changeset [12182] by
- Implemented new Feedback states.
10/13/11:
- 14:27 Changeset [12181] by
- update hostname of mysql server
- 10:21 Changeset [12180] by
- Removed the obsolete use of the Trigger-Patches.txt, the fPatchHW and the patches-array in the gui classes
- 09:22 Changeset [12179] by
- Added treatment of new buttons fThresholdEnable/DisablePatch
- 09:16 Changeset [12178] by
- Added buttons to enable disable all pixels of a singel patch.
- 09:09 Changeset [12177] by
- Added new commands ENABLE_PATCH and DISABLE_PATCH
10/12/11:
- 21:41 Changeset [12176] by
- Switched off overwriting of scale when auto scale is switched off.
- 21:20 Changeset [12175] by
- Updated usage information and Configuration class usage.
- 12:05 Changeset [12174] by
- Added the needed stuff for the DRS Calibration.
- 12:04 Changeset [12173] by
- Fixed a weird asymmetric color scale; fixed the wrong DRS calibration by using the proper class; hacked the rest to get this working.
10/11/11:
- 23:14 Changeset [12172] by
- 19:29 Changeset [12171] by
- Changed wrong character
- 19:26 Changeset [12170] by
- small fix: Thomas and Werner
- 19:26 Changeset [12169] by
- initial commit of discriminator.C
- 14:59 Changeset [12168] by
- merge versions from Werner and Dominik
- 13:47 Changeset [12167] by
- Updated graph; unified paths; updated compilation of file-names; removed obsolete commands
- 13:32 Changeset [12166] by
- initial commit
10/02/11:
- 13:36 Changeset [12165] by
- 13:36 Changeset [12164] by
- Added bool-cast operator to PixelMapEntry.
- 13:35 Changeset [12163] by
- Choose better name for PCTime column
- 13:34 Changeset [12162] by
- Adapted to latest change in Makefile.am
- 13:33 Changeset [12161] by
- Undo last revision.
- 13:28 Changeset [12160] by
- Added PixelMap.cc to fact_SOURCES
10/01/11:
- 20:11 Changeset [12159] by
- Removed definition of PixelMapEntry::empty -- it simple does not belong here -- please fix it correctly
Note:
See TracTimeline
for information about the timeline view.
