Timeline



11/01/11:

15:46 Changeset [12357] by neise
starting point for gain fit
14:59 Changeset [12356] by neise
adjusted fbsl for ISDC cluster .. I basically renamed a few variables and generally tidied up a bit ... not sure what actually helped... maybe its still not solved.
04:36 Changeset [12355] by tbretz
04:35 Changeset [12354] by tbretz
Added ratecontrol.

10/31/11:

21:25 Changeset [12353] by tbretz
Removed an obsolete comment block
20:00 Changeset [12352] by tbretz
Adapted output of filenames.
19:02 Changeset [12351] by tbretz
Set some fixed control loop parameters as determined in Zurich; output also the state of the FSC
18:56 Changeset [12350] by tbretz
Do directly set the new reference in SetReference.
18:55 Changeset [12349] by tbretz
Removed the warning in case of double delete... so far no problems weere encountered.
18:53 Changeset [12348] by tbretz
Use the connection to the DNS as the IP address to get the Local IP.
18:53 Changeset [12347] by tbretz
Make the FEEDBACK receive the data all the time for a combined control of temp and amplitude
18:52 Changeset [12346] by tbretz
Do not use statvfs in SetCurrentFolder.
18:51 Changeset [12345] by tbretz
Display N/40 in decimal
17:41 Changeset [12344] by tbretz
Removed obsolete DataCalib.h and DataCalib.cc from viewer.
14:52 Changeset [12343] by tbretz
Moved some common code between MARS and FACT++ to DrsCalib.h as new class DrsCalibration; renamed CalibData to DrsCalibrate.
02:07 Changeset [12342] by tbretz
Improved output; removed obsolste ?: operators.
00:11 Changeset [12341] by tbretz
Fixed tha calculation of the average ethernet rate; removed min and max and removed the obsolete widgets from the Event builder tab.
00:10 Changeset [12340] by tbretz
Unified FAD and EvtBuilder tab as much as possible.
00:01 Changeset [12339] by tbretz
Renamed default pixel map file.

10/30/11:

23:56 Changeset [12338] by tbretz
Renamed option ramp-time to ramp-delay
23:29 Changeset [12337] by tbretz
Removed stray debug output.
22:38 Changeset [12336] by tbretz
For the time being go back to idle when a new run was successfully started.
22:36 Changeset [12335] by tbretz
Improved class reference.
22:36 Changeset [12334] by tbretz
Renamed kTakingData to kTriggerOn
22:35 Changeset [12333] by tbretz
Added GetNumFilesOpen and IncreaseRunNumber.
22:34 Changeset [12332] by tbretz
Replaced kTakingData by kTriggerOn
22:34 Changeset [12331] by tbretz
Added the state kWritingData and avoid that run-numbers can be decreased manually.
22:33 Changeset [12330] by tbretz
Added state kWritingData.
22:32 Changeset [12329] by tbretz
Changed the 'define all' and 'define err' in a way that it is less disturbing
22:31 Changeset [12328] by tbretz
Renamed FTM::kTakingData to FTM::kTriggerOn
03:43 Changeset [12327] by tbretz
replaces PCTime by UnixTimeUTC
03:41 Changeset [12326] by tbretz
Removed comments; replaced code in Apply by ApplyCh; fixed the problem that the DRS calibration data was assumed to be of size roi/ch instead of 1024/ch

10/29/11:

22:31 Changeset [12325] by tbretz
Show VoltageOff as a red bar in the status LED
21:48 Changeset [12324] by tbretz
Fixed some litle stuff in the new ratescan tab.
21:37 Changeset [12323] by tbretz
Added the possibility to change the step size and maximum during a ratescan.
20:57 Changeset [12322] by tbretz
Allow eversything in fact++.rc

10/28/11:

22:23 Changeset [12321] by Daniela Dorner
adapted paths for raw and aux data
21:49 Changeset [12320] by tbretz
Do not set negative axis ranges in handleRateScan.
21:45 Changeset [12319] by tbretz
Switch control off when voltage off.
20:28 Changeset [12318] by Daniela Dorner
updated ldaphost
20:24 Changeset [12317] by Daniela Dorner
bugfix for updating string
19:58 Changeset [12316] by tbretz
Removed invalid characters from Dim descriptions
19:58 Changeset [12315] by tbretz
Make sure that the default option gets touched even it is finally not needed.
19:57 Changeset [12314] by tbretz
Stop startinga run if datalogger went into error state.
19:56 Changeset [12313] by tbretz
Added an option to disable whole patches. fixed scaling factor in instaniation of Drim TriggerRates.
19:55 Changeset [12312] by tbretz
Fixed a workaround.
19:54 Changeset [12311] by tbretz
Fixed writing of the data.
11:37 Changeset [12310] by lyard
fixed a blur display bug
05:36 Changeset [12309] by tbretz
First woring and tested version.
05:35 Changeset [12308] by tbretz
Added specilized template to make sure we do not have to convert floats to ints

10/27/11:

22:14 Changeset [12307] by neise
added '#define HAVE_ZLIB'
22:04 Changeset [12306] by neise
added removeMaximaAbove method
21:36 Changeset [12305] by neise
adjusted use of zerosearch() method ... this method doesn't return ints anymore, but struct Region see Region.h
21:35 Changeset [12304] by neise
added symmetric sliding average filter
17:10 Changeset [12303] by kraehenb
Save spectra of gainanalysis to the file gainspectra.root.
16:45 Changeset [12302] by lyard
added clean destruction of qwt objects
16:35 Changeset [12301] by lyard
moved double click to single click
16:30 Changeset [12300] by lyard
added RMS tab and fixed time for old format
16:07 Changeset [12299] by kraehenb
Include #define HAVE_ZLIB for compressed data files.
16:00 Changeset [12298] by lusterma
added fbsl.C ...extract baseline data
14:42 Changeset [12297] by lyard
added RMS tab
13:20 Changeset [12296] by Daniela Dorner
added cron to rsync auxiliary and rawdata
04:59 Changeset [12295] by tbretz
Addec code for the rate scan tab display
04:59 Changeset [12294] by tbretz
Added sending of Dim services.
04:58 Changeset [12293] by tbretz
Added controls for rate scan tab.
04:58 Changeset [12292] by tbretz
Added tab for RateScans
01:21 Changeset [12291] by tbretz
Use new features of trigger rate service.
00:20 Changeset [12290] by tbretz
Included EnablePatch and a default constructor for the trigger rates.
00:11 Changeset [12289] by tbretz
Store trigger rates for later display

10/26/11:

23:23 Changeset [12288] by tbretz
Addec ontrols for N/4
23:20 Changeset [12287] by tbretz
Adapted format string for TRIGGER_RATES
23:19 Changeset [12286] by tbretz
Fixed a misspelled class name.
23:19 Changeset [12285] by tbretz
Removed stray debug output.
23:03 Changeset [12284] by tbretz
Added elapsed time and on time to DrimTriggerRate
23:01 Changeset [12283] by tbretz
Display N/4 logic threshold
23:00 Changeset [12282] by tbretz
Added some N/4 controls
19:44 Changeset [12281] by tbretz
Added the most simple spike removal to the display -- sould be possible to switch it off.
19:43 Changeset [12280] by tbretz
Added the most simple spike removal before the statistics for the eventdisplay (maxima, etc) are calculated.
19:42 Changeset [12279] by tbretz
Added some more output in case the previous answer was not yet recived; reset the ramping state when a new connection was established; do not reset voltages if we were previously connected.
19:41 Changeset [12278] by tbretz
Added a very simple spike removal algorithm.
11:41 Changeset [12277] by lyard
fixed the handling of columns names in the datalogger
11:00 Changeset [12276] by kraehenb
Moved declaration of parread_tmp to the other declarations of read parameters of the fit.
10:53 Changeset [12275] by kraehenb
Added more comments. Questions please to tpk@phys.ethz.ch.

10/25/11:

21:33 Changeset [12274] by tbretz
Allow that UnixTimeUTC is missing.
21:32 Changeset [12273] by tbretz
Implemented feedback controls
20:06 Changeset [12272] by tbretz
Exchanged some values whcih were obviously exhanged
19:59 Changeset [12271] by tbretz
Added the possibility to apply a global offset to the temperature controlled feedback values
19:51 Changeset [12270] by tbretz
Added the possibility to switch off the update interval.
19:50 Changeset [12269] by tbretz
Fixed wiritng the fits header.
19:49 Changeset [12268] by tbretz
Fixed the output in the txt-file.
19:49 Changeset [12267] by tbretz
Replaced the int16_t for dac by a uint16_t
19:48 Changeset [12266] by tbretz
Disabled some broken sensor widgets by default
14:03 Changeset [12265] by neise
removed needless include statement
14:02 Changeset [12264] by neise
whitespaces
14:02 Changeset [12263] by neise
a better example than fpeak_discri.C ... at least I hope so
13:55 Changeset [12262] by neise
makes use of the new discriminators
13:53 Changeset [12261] by neise
whitespaces only
13:52 Changeset [12260] by neise
I case you want to see real raw data
13:52 Changeset [12259] by neise
discriminator does now return vector<Region>
13:51 Changeset [12258] by neise
zerosearch does now return vector<Region>
13:50 Changeset [12257] by neise
vector<Region> are returned by most of my discriminators
13:50 Changeset [12256] by neise
added zipped fits file support
13:49 Changeset [12255] by neise
i know its wrong ... but i can't work without these files...

10/23/11:

21:40 Changeset [12254] by tbretz
Added the possibility to change the update interval online.
19:43 Changeset [12253] by tbretz
Added tab for drive controls.
19:43 Changeset [12252] by tbretz
Added commands to set LED brightness.
17:06 Changeset [12251] by tbretz
Added descriptions for the dim services.
17:05 Changeset [12250] by tbretz
Added some dim descriptions.
17:05 Changeset [12249] by tbretz
Added some Dim descriptions and a new service propagating the nominal voltages.
15:54 Changeset [12248] by tbretz
Added some state descriptions.
15:09 Changeset [12247] by tbretz
Added state descriptions; replaced WAIT_FOR_RUN_NUMBER by START_RUN_LOGGING and fixed a typo in a message
15:08 Changeset [12246] by tbretz
Reverting to last revision.
15:08 Changeset [12245] by tbretz
Reverting to last revision.
15:07 Changeset [12244] by tbretz
Reverting to last revision.
15:06 Changeset [12243] by tbretz
Added output of commands and states to --help
15:01 Changeset [12242] by tbretz
Fixed a typo.
15:00 Changeset [12241] by tbretz
Added possibility to scan in the N-out-of-4 logic.
14:53 Changeset [12240] by tbretz
Some imporved output.
14:47 Changeset [12239] by tbretz
Added configuration options and more help output.
14:37 Changeset [12238] by tbretz
Give scan range with the START command.
14:33 Changeset [12237] by tbretz
Allow to set one patch or pixel as reference for the rate-scan.
13:33 Changeset [12236] by tbretz
Changed signed char to unsigned in output queue.
12:45 Changeset [12235] by tbretz
Some lttle cosmetics; added some help stuff.
12:43 Changeset [12234] by tbretz
Allow STOP in all states.
12:43 Changeset [12233] by tbretz
Switch off debugging by default.
12:40 Changeset [12232] by tbretz
Added some more DEBUG stuff.
12:39 Changeset [12231] by tbretz
Fixed the new DEBUG stuff.

10/22/11:

19:26 Changeset [12230] by tbretz
Added some debug options.
19:25 Changeset [12229] by tbretz
Added some debug out code.
19:25 Changeset [12228] by tbretz
Fixed start/stop buttons for datalogger.

10/21/11:

18:09 Changeset [12227] by tbretz
Latest updates and bug fixes.
17:58 Changeset [12226] by tbretz
Latest updates and bug fixes.
13:53 Changeset [12225] by Jens Buss
more comments edited
13:47 Changeset [12224] by Jens Buss
Comments edited

10/20/11:

22:40 Changeset [12223] by tbretz
Fixed a scoping problem.
22:32 Changeset [12222] by tbretz
Fixed status VoltageOff.
17:52 Changeset [12221] by tbretz
Debuged temperature feedback.
17:17 Changeset [12220] by neise
now with ramping
13:40 Changeset [12219] by tbretz
Send only calibration events to feedback system.
13:34 Changeset [12218] by tbretz
Adapted the datalogger state checks
11:43 Changeset [12217] by tbretz
Evaluate the new status which shows if an FAD is configured.
11:42 Changeset [12216] by tbretz
Send a different status for FADs which are currently configured.
11:34 Changeset [12215] by tbretz
Allow derived classes to access CloseImp from handlers.
11:33 Changeset [12214] by tbretz
Improved error messages; replaces PostClose by CloseImp in handlers.
11:33 Changeset [12213] by tbretz
Improved error messages; switched to hardware flow control -- does this make any sense?
11:32 Changeset [12212] by tbretz
Fixed a problem with the pixels 0-159 in the Rates tab.
01:15 Changeset [12211] by tbretz
Added some more debug output.
01:14 Changeset [12210] by tbretz
Debuged to make it work.
01:13 Changeset [12209] by tbretz
Unifiy instantiation and assignemnt of initial numbers.
01:13 Changeset [12208] by tbretz
Send SET_GAPD_REFERENCE_OFFSET as float:

10/18/11:

15:19 Changeset [12207] by lusterma
15:18 Changeset [12206] by lusterma
14:01 Changeset [12205] by neise
removed CRLF
14:00 Changeset [12204] by neise
removed CRLF
14:00 Changeset [12203] by tbretz
Removed some obsolete output in PrintUsage
13:59 Changeset [12202] by tbretz
Added ratescan.
13:58 Changeset [12201] by tbretz
First version of a tool performing a rate scan.
12:47 Changeset [12200] by Daniela Dorner
added dummy version of this file with link where to find the file
12:47 Changeset [12199] by Daniela Dorner
added dummy version of this file with link where to find file
12:35 Changeset [12198] by Daniela Dorner
removed (to avoid having the file twice in the svn)
12:35 Changeset [12197] by Daniela Dorner
removed (to have file not double in svn)
11:13 Changeset [12196] by neise
typo
11:10 Changeset [12195] by neise
erm .. not yet working.. but I want to submit it anyway
11:10 Changeset [12194] by neise
copy of FACT++/externals ... shouldn't be here .. but i don't know a better way
11:09 Changeset [12193] by neise
formerly fana.C test for zipped fits files

10/17/11:

20:18 Changeset [12192] by tbretz
Removed obsolete files.
20:11 Changeset [12191] by tbretz
Added PixelMap to feedback.
19:59 Changeset [12190] by tbretz
Updated efeaults.
19:59 Changeset [12189] by tbretz
Fixed startup.
19:47 Changeset [12188] by tbretz
Fixed several mappings.
16:37 Changeset [12187] by tbretz
Replaced dic_cmnd_service by DimClient::sendCommandNB.
16:37 Changeset [12186] by tbretz
Added the missing channel spin-box.
16:36 Changeset [12185] by tbretz
Removed a lot of obsolete code; many simplifications; started to clean up all the mess.
13:23 Changeset [12184] by tbretz
Removed a lot of obsolete code, added some code to unify the GUI class with the strange connector class.
12:33 Changeset [12183] by tbretz
Implemented the possibility to adapt the voltage according to the temperature readout from the sensor plate.
09:34 Changeset [12182] by tbretz
Implemented new Feedback states.

10/13/11:

14:27 Changeset [12181] by Daniela Dorner
update hostname of mysql server
10:21 Changeset [12180] by tbretz
Removed the obsolete use of the Trigger-Patches.txt, the fPatchHW and the patches-array in the gui classes
09:22 Changeset [12179] by tbretz
Added treatment of new buttons fThresholdEnable/DisablePatch
09:16 Changeset [12178] by tbretz
Added buttons to enable disable all pixels of a singel patch.
09:09 Changeset [12177] by tbretz
Added new commands ENABLE_PATCH and DISABLE_PATCH

10/12/11:

21:41 Changeset [12176] by tbretz
Switched off overwriting of scale when auto scale is switched off.
21:20 Changeset [12175] by tbretz
Updated usage information and Configuration class usage.
12:05 Changeset [12174] by tbretz
Added the needed stuff for the DRS Calibration.
12:04 Changeset [12173] by tbretz
Fixed a weird asymmetric color scale; fixed the wrong DRS calibration by using the proper class; hacked the rest to get this working.

10/11/11:

23:14 Changeset [12172] by kraehenb
19:29 Changeset [12171] by kraehenb
Changed wrong character
19:26 Changeset [12170] by neise
small fix: Thomas and Werner
19:26 Changeset [12169] by neise
initial commit of discriminator.C
14:59 Changeset [12168] by lusterma
merge versions from Werner and Dominik
13:47 Changeset [12167] by tbretz
Updated graph; unified paths; updated compilation of file-names; removed obsolete commands
13:32 Changeset [12166] by neise
initial commit

10/02/11:

13:36 Changeset [12165] by tbretz
13:36 Changeset [12164] by tbretz
Added bool-cast operator to PixelMapEntry.
13:35 Changeset [12163] by tbretz
Choose better name for PCTime column
13:34 Changeset [12162] by tbretz
Adapted to latest change in Makefile.am
13:33 Changeset [12161] by tbretz
Undo last revision.
13:28 Changeset [12160] by tbretz
Added PixelMap.cc to fact_SOURCES
Note: See TracTimeline for information about the timeline view.